diff options
author | James Hogan <james.hogan@imgtec.com> | 2012-10-09 10:54:47 +0100 |
---|---|---|
committer | James Hogan <james.hogan@imgtec.com> | 2013-03-02 20:09:48 +0000 |
commit | 5698c50d9da4ab2f57d98c64ea97675dcaf2a608 (patch) | |
tree | 5b82a24daa8bbb85703489340cbfdcb00a2f20a4 /drivers/irqchip/irq-metag-ext.c | |
parent | 63047ea36070d11f902ab7d09a5a18aea037c0f7 (diff) | |
download | op-kernel-dev-5698c50d9da4ab2f57d98c64ea97675dcaf2a608.zip op-kernel-dev-5698c50d9da4ab2f57d98c64ea97675dcaf2a608.tar.gz |
metag: Internal and external irqchips
Meta core internal interrupts (from HWSTATMETA and friends) are vectored
onto the TR1 core trigger for the current thread. This is demultiplexed
in irq-metag.c to individual Linux IRQs for each internal interrupt.
External SoC interrupts (from HWSTATEXT and friends) are vectored onto
the TR2 core trigger for the current thread. This is demultiplexed in
irq-metag-ext.c to individual Linux IRQs for each external SoC interrupt.
The external irqchip has devicetree bindings for configuring the number
of irq banks and the type of masking available.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: Dom Cobley <popcornmix@gmail.com>
Cc: Simon Arlott <simon@fire.lp0.eu>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-doc@vger.kernel.org
Diffstat (limited to 'drivers/irqchip/irq-metag-ext.c')
-rw-r--r-- | drivers/irqchip/irq-metag-ext.c | 868 |
1 files changed, 868 insertions, 0 deletions
diff --git a/drivers/irqchip/irq-metag-ext.c b/drivers/irqchip/irq-metag-ext.c new file mode 100644 index 0000000..92c41ab --- /dev/null +++ b/drivers/irqchip/irq-metag-ext.c @@ -0,0 +1,868 @@ +/* + * Meta External interrupt code. + * + * Copyright (C) 2005-2012 Imagination Technologies Ltd. + * + * External interrupts on Meta are configured at two-levels, in the CPU core and + * in the external trigger block. Interrupts from SoC peripherals are + * multiplexed onto a single Meta CPU "trigger" - traditionally it has always + * been trigger 2 (TR2). For info on how de-multiplexing happens check out + * meta_intc_irq_demux(). + */ + +#include <linux/interrupt.h> +#include <linux/irqchip/metag-ext.h> +#include <linux/irqdomain.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/syscore_ops.h> + +#include <asm/irq.h> +#include <asm/hwthread.h> + +#define HWSTAT_STRIDE 8 +#define HWVEC_BLK_STRIDE 0x1000 + +/** + * struct meta_intc_priv - private meta external interrupt data + * @nr_banks: Number of interrupt banks + * @domain: IRQ domain for all banks of external IRQs + * @unmasked: Record of unmasked IRQs + * @levels_altered: Record of altered level bits + */ +struct meta_intc_priv { + unsigned int nr_banks; + struct irq_domain *domain; + + unsigned long unmasked[4]; + +#ifdef CONFIG_METAG_SUSPEND_MEM + unsigned long levels_altered[4]; +#endif +}; + +/* Private data for the one and only external interrupt controller */ +static struct meta_intc_priv meta_intc_priv; + +/** + * meta_intc_offset() - Get the offset into the bank of a hardware IRQ number + * @hw: Hardware IRQ number (within external trigger block) + * + * Returns: Bit offset into the IRQ's bank registers + */ +static unsigned int meta_intc_offset(irq_hw_number_t hw) +{ + return hw & 0x1f; +} + +/** + * meta_intc_bank() - Get the bank number of a hardware IRQ number + * @hw: Hardware IRQ number (within external trigger block) + * + * Returns: Bank number indicating which register the IRQ's bits are + */ +static unsigned int meta_intc_bank(irq_hw_number_t hw) +{ + return hw >> 5; +} + +/** + * meta_intc_stat_addr() - Get the address of a HWSTATEXT register + * @hw: Hardware IRQ number (within external trigger block) + * + * Returns: Address of a HWSTATEXT register containing the status bit for + * the specified hardware IRQ number + */ +static void __iomem *meta_intc_stat_addr(irq_hw_number_t hw) +{ + return (void __iomem *)(HWSTATEXT + + HWSTAT_STRIDE * meta_intc_bank(hw)); +} + +/** + * meta_intc_level_addr() - Get the address of a HWLEVELEXT register + * @hw: Hardware IRQ number (within external trigger block) + * + * Returns: Address of a HWLEVELEXT register containing the sense bit for + * the specified hardware IRQ number + */ +static void __iomem *meta_intc_level_addr(irq_hw_number_t hw) +{ + return (void __iomem *)(HWLEVELEXT + + HWSTAT_STRIDE * meta_intc_bank(hw)); +} + +/** + * meta_intc_mask_addr() - Get the address of a HWMASKEXT register + * @hw: Hardware IRQ number (within external trigger block) + * + * Returns: Address of a HWMASKEXT register containing the mask bit for the + * specified hardware IRQ number + */ +static void __iomem *meta_intc_mask_addr(irq_hw_number_t hw) +{ + return (void __iomem *)(HWMASKEXT + + HWSTAT_STRIDE * meta_intc_bank(hw)); +} + +/** + * meta_intc_vec_addr() - Get the vector address of a hardware interrupt + * @hw: Hardware IRQ number (within external trigger block) + * + * Returns: Address of a HWVECEXT register controlling the core trigger to + * vector the IRQ onto + */ +static inline void __iomem *meta_intc_vec_addr(irq_hw_number_t hw) +{ + return (void __iomem *)(HWVEC0EXT + + HWVEC_BLK_STRIDE * meta_intc_bank(hw) + + HWVECnEXT_STRIDE * meta_intc_offset(hw)); +} + +/** + * meta_intc_startup_irq() - set up an external irq + * @data: data for the external irq to start up + * + * Multiplex interrupts for irq onto TR2. Clear any pending interrupts and + * unmask irq, both using the appropriate callbacks. + */ +static unsigned int meta_intc_startup_irq(struct irq_data *data) +{ + irq_hw_number_t hw = data->hwirq; + void __iomem *vec_addr = meta_intc_vec_addr(hw); + int thread = hard_processor_id(); + + /* Perform any necessary acking. */ + if (data->chip->irq_ack) + data->chip->irq_ack(data); + + /* Wire up this interrupt to the core with HWVECxEXT. */ + metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR2(thread)), vec_addr); + + /* Perform any necessary unmasking. */ + data->chip->irq_unmask(data); + + return 0; +} + +/** + * meta_intc_shutdown_irq() - turn off an external irq + * @data: data for the external irq to turn off + * + * Mask irq using the appropriate callback and stop muxing it onto TR2. + */ +static void meta_intc_shutdown_irq(struct irq_data *data) +{ + irq_hw_number_t hw = data->hwirq; + void __iomem *vec_addr = meta_intc_vec_addr(hw); + + /* Mask the IRQ */ + data->chip->irq_mask(data); + + /* + * Disable the IRQ at the core by removing the interrupt from + * the HW vector mapping. + */ + metag_out32(0, vec_addr); +} + +/** + * meta_intc_ack_irq() - acknowledge an external irq + * @data: data for the external irq to ack + * + * Clear down an edge interrupt in the status register. + */ +static void meta_intc_ack_irq(struct irq_data *data) +{ + irq_hw_number_t hw = data->hwirq; + unsigned int bit = 1 << meta_intc_offset(hw); + void __iomem *stat_addr = meta_intc_stat_addr(hw); + + /* Ack the int, if it is still 'on'. + * NOTE - this only works for edge triggered interrupts. + */ + if (metag_in32(stat_addr) & bit) + metag_out32(bit, stat_addr); +} + +/** + * record_irq_is_masked() - record the IRQ masked so it doesn't get handled + * @data: data for the external irq to record + * + * This should get called whenever an external IRQ is masked (by whichever + * callback is used). It records the IRQ masked so that it doesn't get handled + * if it still shows up in the status register. + */ +static void record_irq_is_masked(struct irq_data *data) +{ + struct meta_intc_priv *priv = &meta_intc_priv; + irq_hw_number_t hw = data->hwirq; + + clear_bit(meta_intc_offset(hw), &priv->unmasked[meta_intc_bank(hw)]); +} + +/** + * record_irq_is_unmasked() - record the IRQ unmasked so it can be handled + * @data: data for the external irq to record + * + * This should get called whenever an external IRQ is unmasked (by whichever + * callback is used). It records the IRQ unmasked so that it gets handled if it + * shows up in the status register. + */ +static void record_irq_is_unmasked(struct irq_data *data) +{ + struct meta_intc_priv *priv = &meta_intc_priv; + irq_hw_number_t hw = data->hwirq; + + set_bit(meta_intc_offset(hw), &priv->unmasked[meta_intc_bank(hw)]); +} + +/* + * For use by wrapper IRQ drivers + */ + +/** + * meta_intc_mask_irq_simple() - minimal mask used by wrapper IRQ drivers + * @data: data for the external irq being masked + * + * This should be called by any wrapper IRQ driver mask functions. it doesn't do + * any masking but records the IRQ as masked so that the core code knows the + * mask has taken place. It is the callers responsibility to ensure that the IRQ + * won't trigger an interrupt to the core. + */ +void meta_intc_mask_irq_simple(struct irq_data *data) +{ + record_irq_is_masked(data); +} + +/** + * meta_intc_unmask_irq_simple() - minimal unmask used by wrapper IRQ drivers + * @data: data for the external irq being unmasked + * + * This should be called by any wrapper IRQ driver unmask functions. it doesn't + * do any unmasking but records the IRQ as unmasked so that the core code knows + * the unmask has taken place. It is the callers responsibility to ensure that + * the IRQ can now trigger an interrupt to the core. + */ +void meta_intc_unmask_irq_simple(struct irq_data *data) +{ + record_irq_is_unmasked(data); +} + + +/** + * meta_intc_mask_irq() - mask an external irq using HWMASKEXT + * @data: data for the external irq to mask + * + * This is a default implementation of a mask function which makes use of the + * HWMASKEXT registers available in newer versions. + * + * Earlier versions without these registers should use SoC level IRQ masking + * which call the meta_intc_*_simple() functions above, or if that isn't + * available should use the fallback meta_intc_*_nomask() functions below. + */ +static void meta_intc_mask_irq(struct irq_data *data) +{ + irq_hw_number_t hw = data->hwirq; + unsigned int bit = 1 << meta_intc_offset(hw); + void __iomem *mask_addr = meta_intc_mask_addr(hw); + unsigned long flags; + + record_irq_is_masked(data); + + /* update the interrupt mask */ + __global_lock2(flags); + metag_out32(metag_in32(mask_addr) & ~bit, mask_addr); + __global_unlock2(flags); +} + +/** + * meta_intc_unmask_irq() - unmask an external irq using HWMASKEXT + * @data: data for the external irq to unmask + * + * This is a default implementation of an unmask function which makes use of the + * HWMASKEXT registers available on new versions. It should be paired with + * meta_intc_mask_irq() above. + */ +static void meta_intc_unmask_irq(struct irq_data *data) +{ + irq_hw_number_t hw = data->hwirq; + unsigned int bit = 1 << meta_intc_offset(hw); + void __iomem *mask_addr = meta_intc_mask_addr(hw); + unsigned long flags; + + record_irq_is_unmasked(data); + + /* update the interrupt mask */ + __global_lock2(flags); + metag_out32(metag_in32(mask_addr) | bit, mask_addr); + __global_unlock2(flags); +} + +/** + * meta_intc_mask_irq_nomask() - mask an external irq by unvectoring + * @data: data for the external irq to mask + * + * This is the version of the mask function for older versions which don't have + * HWMASKEXT registers, or a SoC level means of masking IRQs. Instead the IRQ is + * unvectored from the core and retriggered if necessary later. + */ +static void meta_intc_mask_irq_nomask(struct irq_data *data) +{ + irq_hw_number_t hw = data->hwirq; + void __iomem *vec_addr = meta_intc_vec_addr(hw); + + record_irq_is_masked(data); + + /* there is no interrupt mask, so unvector the interrupt */ + metag_out32(0, vec_addr); +} + +/** + * meta_intc_unmask_edge_irq_nomask() - unmask an edge irq by revectoring + * @data: data for the external irq to unmask + * + * This is the version of the unmask function for older versions which don't + * have HWMASKEXT registers, or a SoC level means of masking IRQs. Instead the + * IRQ is revectored back to the core and retriggered if necessary. + * + * The retriggering done by this function is specific to edge interrupts. + */ +static void meta_intc_unmask_edge_irq_nomask(struct irq_data *data) +{ + irq_hw_number_t hw = data->hwirq; + unsigned int bit = 1 << meta_intc_offset(hw); + void __iomem *stat_addr = meta_intc_stat_addr(hw); + void __iomem *vec_addr = meta_intc_vec_addr(hw); + unsigned int thread = hard_processor_id(); + + record_irq_is_unmasked(data); + + /* there is no interrupt mask, so revector the interrupt */ + metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR2(thread)), vec_addr); + + /* + * Re-trigger interrupt + * + * Writing a 1 toggles, and a 0->1 transition triggers. We only + * retrigger if the status bit is already set, which means we + * need to clear it first. Retriggering is fundamentally racy + * because if the interrupt fires again after we clear it we + * could end up clearing it again and the interrupt handler + * thinking it hasn't fired. Therefore we need to keep trying to + * retrigger until the bit is set. + */ + if (metag_in32(stat_addr) & bit) { + metag_out32(bit, stat_addr); + while (!(metag_in32(stat_addr) & bit)) + metag_out32(bit, stat_addr); + } +} + +/** + * meta_intc_unmask_level_irq_nomask() - unmask a level irq by revectoring + * @data: data for the external irq to unmask + * + * This is the version of the unmask function for older versions which don't + * have HWMASKEXT registers, or a SoC level means of masking IRQs. Instead the + * IRQ is revectored back to the core and retriggered if necessary. + * + * The retriggering done by this function is specific to level interrupts. + */ +static void meta_intc_unmask_level_irq_nomask(struct irq_data *data) +{ + irq_hw_number_t hw = data->hwirq; + unsigned int bit = 1 << meta_intc_offset(hw); + void __iomem *stat_addr = meta_intc_stat_addr(hw); + void __iomem *vec_addr = meta_intc_vec_addr(hw); + unsigned int thread = hard_processor_id(); + + record_irq_is_unmasked(data); + + /* there is no interrupt mask, so revector the interrupt */ + metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR2(thread)), vec_addr); + + /* Re-trigger interrupt */ + /* Writing a 1 triggers interrupt */ + if (metag_in32(stat_addr) & bit) + metag_out32(bit, stat_addr); +} + +/** + * meta_intc_irq_set_type() - set the type of an external irq + * @data: data for the external irq to set the type of + * @flow_type: new irq flow type + * + * Set the flow type of an external interrupt. This updates the irq chip and irq + * handler depending on whether the irq is edge or level sensitive (the polarity + * is ignored), and also sets up the bit in HWLEVELEXT so the hardware knows + * when to trigger. + */ +static int meta_intc_irq_set_type(struct irq_data *data, unsigned int flow_type) +{ +#ifdef CONFIG_METAG_SUSPEND_MEM + struct meta_intc_priv *priv = &meta_intc_priv; +#endif + unsigned int irq = data->irq; + irq_hw_number_t hw = data->hwirq; + unsigned int bit = 1 << meta_intc_offset(hw); + void __iomem *level_addr = meta_intc_level_addr(hw); + unsigned long flags; + unsigned int level; + + /* update the chip/handler */ + if (flow_type & IRQ_TYPE_LEVEL_MASK) + __irq_set_chip_handler_name_locked(irq, &meta_intc_level_chip, + handle_level_irq, NULL); + else + __irq_set_chip_handler_name_locked(irq, &meta_intc_edge_chip, + handle_edge_irq, NULL); + + /* and clear/set the bit in HWLEVELEXT */ + __global_lock2(flags); + level = metag_in32(level_addr); + if (flow_type & IRQ_TYPE_LEVEL_MASK) + level |= bit; + else + level &= ~bit; + metag_out32(level, level_addr); +#ifdef CONFIG_METAG_SUSPEND_MEM + priv->levels_altered[meta_intc_bank(hw)] |= bit; +#endif + __global_unlock2(flags); + + return 0; +} + +/** + * meta_intc_irq_demux() - external irq de-multiplexer + * @irq: the virtual interrupt number + * @desc: the interrupt description structure for this irq + * + * The cpu receives an interrupt on TR2 when a SoC interrupt has occurred. It is + * this function's job to demux this irq and figure out exactly which external + * irq needs servicing. + * + * Whilst using TR2 to detect external interrupts is a software convention it is + * (hopefully) unlikely to change. + */ +static void meta_intc_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + struct meta_intc_priv *priv = &meta_intc_priv; + irq_hw_number_t hw; + unsigned int bank, irq_no, status; + void __iomem *stat_addr = meta_intc_stat_addr(0); + + /* + * Locate which interrupt has caused our handler to run. + */ + for (bank = 0; bank < priv->nr_banks; ++bank) { + /* Which interrupts are currently pending in this bank? */ +recalculate: + status = metag_in32(stat_addr) & priv->unmasked[bank]; + + for (hw = bank*32; status; status >>= 1, ++hw) { + if (status & 0x1) { + /* + * Map the hardware IRQ number to a virtual + * Linux IRQ number. + */ + irq_no = irq_linear_revmap(priv->domain, hw); + + /* + * Only fire off external interrupts that are + * registered to be handled by the kernel. + * Other external interrupts are probably being + * handled by other Meta hardware threads. + */ + generic_handle_irq(irq_no); + + /* + * The handler may have re-enabled interrupts + * which could have caused a nested invocation + * of this code and make the copy of the + * status register we are using invalid. + */ + goto recalculate; + } + } + stat_addr += HWSTAT_STRIDE; + } +} + +#ifdef CONFIG_SMP +/** + * meta_intc_set_affinity() - set the affinity for an interrupt + * @data: data for the external irq to set the affinity of + * @cpumask: cpu mask representing cpus which can handle the interrupt + * @force: whether to force (ignored) + * + * Revector the specified external irq onto a specific cpu's TR2 trigger, so + * that that cpu tends to be the one who handles it. + */ +static int meta_intc_set_affinity(struct irq_data *data, + const struct cpumask *cpumask, bool force) +{ + irq_hw_number_t hw = data->hwirq; + void __iomem *vec_addr = meta_intc_vec_addr(hw); + unsigned int cpu, thread; + + /* + * Wire up this interrupt from HWVECxEXT to the Meta core. + * + * Note that we can't wire up HWVECxEXT to interrupt more than + * one cpu (the interrupt code doesn't support it), so we just + * pick the first cpu we find in 'cpumask'. + */ + cpu = cpumask_any(cpumask); + thread = cpu_2_hwthread_id[cpu]; + + metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR2(thread)), vec_addr); + + return 0; +} +#else +#define meta_intc_set_affinity NULL +#endif + +#ifdef CONFIG_PM_SLEEP +#define META_INTC_CHIP_FLAGS (IRQCHIP_MASK_ON_SUSPEND \ + | IRQCHIP_SKIP_SET_WAKE) +#else +#define META_INTC_CHIP_FLAGS 0 +#endif + +/* public edge/level irq chips which SoCs can override */ + +struct irq_chip meta_intc_edge_chip = { + .irq_startup = meta_intc_startup_irq, + .irq_shutdown = meta_intc_shutdown_irq, + .irq_ack = meta_intc_ack_irq, + .irq_mask = meta_intc_mask_irq, + .irq_unmask = meta_intc_unmask_irq, + .irq_set_type = meta_intc_irq_set_type, + .irq_set_affinity = meta_intc_set_affinity, + .flags = META_INTC_CHIP_FLAGS, +}; + +struct irq_chip meta_intc_level_chip = { + .irq_startup = meta_intc_startup_irq, + .irq_shutdown = meta_intc_shutdown_irq, + .irq_set_type = meta_intc_irq_set_type, + .irq_mask = meta_intc_mask_irq, + .irq_unmask = meta_intc_unmask_irq, + .irq_set_affinity = meta_intc_set_affinity, + .flags = META_INTC_CHIP_FLAGS, +}; + +/** + * meta_intc_map() - map an external irq + * @d: irq domain of external trigger block + * @irq: virtual irq number + * @hw: hardware irq number within external trigger block + * + * This sets up a virtual irq for a specified hardware interrupt. The irq chip + * and handler is configured, using the HWLEVELEXT registers to determine + * edge/level flow type. These registers will have been set when the irq type is + * set (or set to a default at init time). + */ +static int meta_intc_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + unsigned int bit = 1 << meta_intc_offset(hw); + void __iomem *level_addr = meta_intc_level_addr(hw); + + /* Go by the current sense in the HWLEVELEXT register */ + if (metag_in32(level_addr) & bit) + irq_set_chip_and_handler(irq, &meta_intc_level_chip, + handle_level_irq); + else + irq_set_chip_and_handler(irq, &meta_intc_edge_chip, + handle_edge_irq); + return 0; +} + +static const struct irq_domain_ops meta_intc_domain_ops = { + .map = meta_intc_map, + .xlate = irq_domain_xlate_twocell, +}; + +#ifdef CONFIG_METAG_SUSPEND_MEM + +/** + * struct meta_intc_context - suspend context + * @levels: State of HWLEVELEXT registers + * @masks: State of HWMASKEXT registers + * @vectors: State of HWVECEXT registers + * @txvecint: State of TxVECINT registers + * + * This structure stores the IRQ state across suspend. + */ +struct meta_intc_context { + u32 levels[4]; + u32 masks[4]; + u8 vectors[4*32]; + + u8 txvecint[4][4]; +}; + +/* suspend context */ +static struct meta_intc_context *meta_intc_context; + +/** + * meta_intc_suspend() - store irq state + * + * To avoid interfering with other threads we only save the IRQ state of IRQs in + * use by Linux. + */ +static int meta_intc_suspend(void) +{ + struct meta_intc_priv *priv = &meta_intc_priv; + int i, j; + irq_hw_number_t hw; + unsigned int bank; + unsigned long flags; + struct meta_intc_context *context; + void __iomem *level_addr, *mask_addr, *vec_addr; + u32 mask, bit; + + context = kzalloc(sizeof(*context), GFP_ATOMIC); + if (!context) + return -ENOMEM; + + hw = 0; + level_addr = meta_intc_level_addr(0); + mask_addr = meta_intc_mask_addr(0); + for (bank = 0; bank < priv->nr_banks; ++bank) { + vec_addr = meta_intc_vec_addr(hw); + + /* create mask of interrupts in use */ + mask = 0; + for (bit = 1; bit; bit <<= 1) { + i = irq_linear_revmap(priv->domain, hw); + /* save mapped irqs which are enabled or have actions */ + if (i && (!irqd_irq_disabled(irq_get_irq_data(i)) || + irq_has_action(i))) { + mask |= bit; + + /* save trigger vector */ + context->vectors[hw] = metag_in32(vec_addr); + } + + ++hw; + vec_addr += HWVECnEXT_STRIDE; + } + + /* save level state if any IRQ levels altered */ + if (priv->levels_altered[bank]) + context->levels[bank] = metag_in32(level_addr); + /* save mask state if any IRQs in use */ + if (mask) + context->masks[bank] = metag_in32(mask_addr); + + level_addr += HWSTAT_STRIDE; + mask_addr += HWSTAT_STRIDE; + } + + /* save trigger matrixing */ + __global_lock2(flags); + for (i = 0; i < 4; ++i) + for (j = 0; j < 4; ++j) + context->txvecint[i][j] = metag_in32(T0VECINT_BHALT + + TnVECINT_STRIDE*i + + 8*j); + __global_unlock2(flags); + + meta_intc_context = context; + return 0; +} + +/** + * meta_intc_resume() - restore saved irq state + * + * Restore the saved IRQ state and drop it. + */ +static void meta_intc_resume(void) +{ + struct meta_intc_priv *priv = &meta_intc_priv; + int i, j; + irq_hw_number_t hw; + unsigned int bank; + unsigned long flags; + struct meta_intc_context *context = meta_intc_context; + void __iomem *level_addr, *mask_addr, *vec_addr; + u32 mask, bit, tmp; + + meta_intc_context = NULL; + + hw = 0; + level_addr = meta_intc_level_addr(0); + mask_addr = meta_intc_mask_addr(0); + for (bank = 0; bank < priv->nr_banks; ++bank) { + vec_addr = meta_intc_vec_addr(hw); + + /* create mask of interrupts in use */ + mask = 0; + for (bit = 1; bit; bit <<= 1) { + i = irq_linear_revmap(priv->domain, hw); + /* restore mapped irqs, enabled or with actions */ + if (i && (!irqd_irq_disabled(irq_get_irq_data(i)) || + irq_has_action(i))) { + mask |= bit; + + /* restore trigger vector */ + metag_out32(context->vectors[hw], vec_addr); + } + + ++hw; + vec_addr += HWVECnEXT_STRIDE; + } + + if (mask) { + /* restore mask state */ + __global_lock2(flags); + tmp = metag_in32(mask_addr); + tmp = (tmp & ~mask) | (context->masks[bank] & mask); + metag_out32(tmp, mask_addr); + __global_unlock2(flags); + } + + mask = priv->levels_altered[bank]; + if (mask) { + /* restore level state */ + __global_lock2(flags); + tmp = metag_in32(level_addr); + tmp = (tmp & ~mask) | (context->levels[bank] & mask); + metag_out32(tmp, level_addr); + __global_unlock2(flags); + } + + level_addr += HWSTAT_STRIDE; + mask_addr += HWSTAT_STRIDE; + } + + /* restore trigger matrixing */ + __global_lock2(flags); + for (i = 0; i < 4; ++i) { + for (j = 0; j < 4; ++j) { + metag_out32(context->txvecint[i][j], + T0VECINT_BHALT + + TnVECINT_STRIDE*i + + 8*j); + } + } + __global_unlock2(flags); + + kfree(context); +} + +static struct syscore_ops meta_intc_syscore_ops = { + .suspend = meta_intc_suspend, + .resume = meta_intc_resume, +}; + +static void __init meta_intc_init_syscore_ops(struct meta_intc_priv *priv) +{ + register_syscore_ops(&meta_intc_syscore_ops); +} +#else +#define meta_intc_init_syscore_ops(priv) do {} while (0) +#endif + +/** + * meta_intc_init_cpu() - register with a Meta cpu + * @priv: private interrupt controller data + * @cpu: the CPU to register on + * + * Configure @cpu's TR2 irq so that we can demux external irqs. + */ +static void __init meta_intc_init_cpu(struct meta_intc_priv *priv, int cpu) +{ + unsigned int thread = cpu_2_hwthread_id[cpu]; + unsigned int signum = TBID_SIGNUM_TR2(thread); + int irq = tbisig_map(signum); + + /* Register the multiplexed IRQ handler */ + irq_set_chained_handler(irq, meta_intc_irq_demux); + irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); +} + +/** + * meta_intc_no_mask() - indicate lack of HWMASKEXT registers + * + * Called from SoC code (or init code below) to dynamically indicate the lack of + * HWMASKEXT registers (for example depending on some SoC revision register). + * This alters the irq mask and unmask callbacks to use the fallback + * unvectoring/retriggering technique instead of using HWMASKEXT registers. + */ +void __init meta_intc_no_mask(void) +{ + meta_intc_edge_chip.irq_mask = meta_intc_mask_irq_nomask; + meta_intc_edge_chip.irq_unmask = meta_intc_unmask_edge_irq_nomask; + meta_intc_level_chip.irq_mask = meta_intc_mask_irq_nomask; + meta_intc_level_chip.irq_unmask = meta_intc_unmask_level_irq_nomask; +} + +/** + * init_external_IRQ() - initialise the external irq controller + * + * Set up the external irq controller using device tree properties. This is + * called from init_IRQ(). + */ +int __init init_external_IRQ(void) +{ + struct meta_intc_priv *priv = &meta_intc_priv; + struct device_node *node; + int ret, cpu; + u32 val; + bool no_masks = false; + + node = of_find_compatible_node(NULL, NULL, "img,meta-intc"); + if (!node) + return -ENOENT; + + /* Get number of banks */ + ret = of_property_read_u32(node, "num-banks", &val); + if (ret) { + pr_err("meta-intc: No num-banks property found\n"); + return ret; + } + if (val < 1 || val > 4) { + pr_err("meta-intc: num-banks (%u) out of range\n", val); + return -EINVAL; + } + priv->nr_banks = val; + + /* Are any mask registers present? */ + if (of_get_property(node, "no-mask", NULL)) + no_masks = true; + + /* No HWMASKEXT registers present? */ + if (no_masks) + meta_intc_no_mask(); + + /* Set up an IRQ domain */ + /* + * This is a legacy IRQ domain for now until all the platform setup code + * has been converted to devicetree. + */ + priv->domain = irq_domain_add_linear(node, priv->nr_banks*32, + &meta_intc_domain_ops, priv); + if (unlikely(!priv->domain)) { + pr_err("meta-intc: cannot add IRQ domain\n"); + return -ENOMEM; + } + + /* Setup TR2 for all cpus. */ + for_each_possible_cpu(cpu) + meta_intc_init_cpu(priv, cpu); + + /* Set up system suspend/resume callbacks */ + meta_intc_init_syscore_ops(priv); + + pr_info("meta-intc: External IRQ controller initialised (%u IRQs)\n", + priv->nr_banks*32); + + return 0; +} |