Merge tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver patches from Greg Kroah-Hartman:
 "Here's the big char/misc driver patches for 3.9-rc1.

  Nothing major here, just lots of different driver updates (mei,
  hyperv, ipack, extcon, vmci, etc.).

  All of these have been in the linux-next tree for a while."

* tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits)
  w1: w1_therm: Add force-pullup option for "broken" sensors
  w1: ds2482: Added 1-Wire pull-up support to the driver
  vme: add missing put_device() after device_register() fails
  extcon: max8997: Use workqueue to check cable state after completing boot of platform
  extcon: max8997: Set default UART/USB path on probe
  extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type
  extcon: max8997: Set default of ADC debounce time during initialization
  extcon: max8997: Remove duplicate code related to set H/W line path
  extcon: max8997: Move defined constant to header file
  extcon: max77693: Make max77693_extcon_cable static
  extcon: max8997: Remove unreachable code
  extcon: max8997: Make max8997_extcon_cable static
  extcon: max77693: Remove unnecessary goto statement to improve readability
  extcon: max77693: Convert to devm_input_allocate_device()
  extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style
  CREDITS: update email and address of Harald Hoyer
  extcon: arizona: Use MICDET for final microphone identification
  extcon: arizona: Always take the first HPDET reading as the final one
  extcon: arizona: Clear _trig_sts bits after jack detection
  extcon: arizona: Don't HPDET magic when headphones are enabled
  ...

1 files changed, 49 insertions, 64 deletions

diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
index ab20a08..141094e 100644
--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -20,7 +20,6 @@
 #include <linux/serial.h>
 #include <linux/tty_flip.h>
 #include <linux/slab.h>
-#include <linux/atomic.h>
 #include <linux/io.h>
 #include <linux/ipack.h>
 #include "ipoctal.h"
@@ -38,21 +37,19 @@ struct ipoctal_channel {
 	spinlock_t			lock;
 	unsigned int			pointer_read;
 	unsigned int			pointer_write;
-	atomic_t			open;
 	struct tty_port			tty_port;
 	union scc2698_channel __iomem	*regs;
 	union scc2698_block __iomem	*block_regs;
 	unsigned int			board_id;
-	unsigned char			*board_write;
 	u8				isr_rx_rdy_mask;
 	u8				isr_tx_rdy_mask;
+	unsigned int			rx_enable;
 };
 
 struct ipoctal {
 	struct ipack_device		*dev;
 	unsigned int			board_id;
 	struct ipoctal_channel		channel[NR_CHANNELS];
-	unsigned char			write;
 	struct tty_driver		*tty_drv;
 	u8 __iomem			*mem8_space;
 	u8 __iomem			*int_space;
@@ -64,28 +61,23 @@ static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty)
 
 	channel = dev_get_drvdata(tty->dev);
 
+	/*
+	 * Enable RX. TX will be enabled when
+	 * there is something to send
+	 */
 	iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+	channel->rx_enable = 1;
 	return 0;
 }
 
 static int ipoctal_open(struct tty_struct *tty, struct file *file)
 {
-	int res;
 	struct ipoctal_channel *channel;
 
 	channel = dev_get_drvdata(tty->dev);
-
-	if (atomic_read(&channel->open))
-		return -EBUSY;
-
 	tty->driver_data = channel;
 
-	res = tty_port_open(&channel->tty_port, tty, file);
-	if (res)
-		return res;
-
-	atomic_inc(&channel->open);
-	return 0;
+	return tty_port_open(&channel->tty_port, tty, file);
 }
 
 static void ipoctal_reset_stats(struct ipoctal_stats *stats)
@@ -111,9 +103,7 @@ static void ipoctal_close(struct tty_struct *tty, struct file *filp)
 	struct ipoctal_channel *channel = tty->driver_data;
 
 	tty_port_close(&channel->tty_port, tty, filp);
-
-	if (atomic_dec_and_test(&channel->open))
-		ipoctal_free_channel(channel);
+	ipoctal_free_channel(channel);
 }
 
 static int ipoctal_get_icount(struct tty_struct *tty,
@@ -137,11 +127,12 @@ static void ipoctal_irq_rx(struct ipoctal_channel *channel, u8 sr)
 {
 	struct tty_port *port = &channel->tty_port;
 	unsigned char value;
-	unsigned char flag = TTY_NORMAL;
+	unsigned char flag;
 	u8 isr;
 
 	do {
 		value = ioread8(&channel->regs->r.rhr);
+		flag = TTY_NORMAL;
 		/* Error: count statistics */
 		if (sr & SR_ERROR) {
 			iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
@@ -183,10 +174,8 @@ static void ipoctal_irq_tx(struct ipoctal_channel *channel)
 	unsigned char value;
 	unsigned int *pointer_write = &channel->pointer_write;
 
-	if (channel->nb_bytes <= 0) {
-		channel->nb_bytes = 0;
+	if (channel->nb_bytes == 0)
 		return;
-	}
 
 	value = channel->tty_port.xmit_buf[*pointer_write];
 	iowrite8(value, &channel->regs->w.thr);
@@ -194,39 +183,27 @@ static void ipoctal_irq_tx(struct ipoctal_channel *channel)
 	(*pointer_write)++;
 	*pointer_write = *pointer_write % PAGE_SIZE;
 	channel->nb_bytes--;
-
-	if ((channel->nb_bytes == 0) &&
-	    (waitqueue_active(&channel->queue))) {
-
-		if (channel->board_id != IPACK1_DEVICE_ID_SBS_OCTAL_485) {
-			*channel->board_write = 1;
-			wake_up_interruptible(&channel->queue);
-		}
-	}
 }
 
 static void ipoctal_irq_channel(struct ipoctal_channel *channel)
 {
 	u8 isr, sr;
 
-	/* If there is no client, skip the check */
-	if (!atomic_read(&channel->open))
-		return;
-
+	spin_lock(&channel->lock);
 	/* The HW is organized in pair of channels.  See which register we need
 	 * to read from */
 	isr = ioread8(&channel->block_regs->r.isr);
 	sr = ioread8(&channel->regs->r.sr);
 
-	/* In case of RS-485, change from TX to RX when finishing TX.
-	 * Half-duplex. */
-	if ((channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) &&
-	    (sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) {
+	if ((sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) {
 		iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
-		iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr);
-		iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
-		*channel->board_write = 1;
-		wake_up_interruptible(&channel->queue);
+		/* In case of RS-485, change from TX to RX when finishing TX.
+		 * Half-duplex. */
+		if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) {
+			iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr);
+			iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+			channel->rx_enable = 1;
+		}
 	}
 
 	/* RX data */
@@ -237,7 +214,7 @@ static void ipoctal_irq_channel(struct ipoctal_channel *channel)
 	if ((isr & channel->isr_tx_rdy_mask) && (sr & SR_TX_READY))
 		ipoctal_irq_tx(channel);
 
-	tty_flip_buffer_push(&channel->tty_port);
+	spin_unlock(&channel->lock);
 }
 
 static irqreturn_t ipoctal_irq_handler(void *arg)
@@ -245,14 +222,14 @@ static irqreturn_t ipoctal_irq_handler(void *arg)
 	unsigned int i;
 	struct ipoctal *ipoctal = (struct ipoctal *) arg;
 
-	/* Check all channels */
-	for (i = 0; i < NR_CHANNELS; i++)
-		ipoctal_irq_channel(&ipoctal->channel[i]);
-
 	/* Clear the IPack device interrupt */
 	readw(ipoctal->int_space + ACK_INT_REQ0);
 	readw(ipoctal->int_space + ACK_INT_REQ1);
 
+	/* Check all channels */
+	for (i = 0; i < NR_CHANNELS; i++)
+		ipoctal_irq_channel(&ipoctal->channel[i]);
+
 	return IRQ_HANDLED;
 }
 
@@ -306,7 +283,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
 	ipoctal->mem8_space =
 		devm_ioremap_nocache(&ipoctal->dev->dev,
 				     region->start, 0x8000);
-	if (!addr) {
+	if (!ipoctal->mem8_space) {
 		dev_err(&ipoctal->dev->dev,
 			"Unable to map slot [%d:%d] MEM8 space!\n",
 			bus_nr, slot);
@@ -319,7 +296,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
 		struct ipoctal_channel *channel = &ipoctal->channel[i];
 		channel->regs = chan_regs + i;
 		channel->block_regs = block_regs + (i >> 1);
-		channel->board_write = &ipoctal->write;
 		channel->board_id = ipoctal->board_id;
 		if (i & 1) {
 			channel->isr_tx_rdy_mask = ISR_TxRDY_B;
@@ -330,6 +306,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
 		}
 
 		iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+		channel->rx_enable = 0;
 		iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
 		iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
 		iowrite8(MR1_CHRL_8_BITS | MR1_ERROR_CHAR | MR1_RxINT_RxRDY,
@@ -402,8 +379,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
 
 		ipoctal_reset_stats(&channel->stats);
 		channel->nb_bytes = 0;
-		init_waitqueue_head(&channel->queue);
-
 		spin_lock_init(&channel->lock);
 		channel->pointer_read = 0;
 		channel->pointer_write = 0;
@@ -414,12 +389,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
 			continue;
 		}
 		dev_set_drvdata(tty_dev, channel);
-
-		/*
-		 * Enable again the RX. TX will be enabled when
-		 * there is something to send
-		 */
-		iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
 	}
 
 	return 0;
@@ -459,6 +428,7 @@ static int ipoctal_write_tty(struct tty_struct *tty,
 	/* As the IP-OCTAL 485 only supports half duplex, do it manually */
 	if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) {
 		iowrite8(CR_DISABLE_RX, &channel->regs->w.cr);
+		channel->rx_enable = 0;
 		iowrite8(CR_CMD_ASSERT_RTSN, &channel->regs->w.cr);
 	}
 
@@ -467,10 +437,6 @@ static int ipoctal_write_tty(struct tty_struct *tty,
 	 * operations
 	 */
 	iowrite8(CR_ENABLE_TX, &channel->regs->w.cr);
-	wait_event_interruptible(channel->queue, *channel->board_write);
-	iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
-
-	*channel->board_write = 0;
 	return char_copied;
 }
 
@@ -622,8 +588,9 @@ static void ipoctal_set_termios(struct tty_struct *tty,
 	iowrite8(mr2, &channel->regs->w.mr);
 	iowrite8(csr, &channel->regs->w.csr);
 
-	/* Enable again the RX */
-	iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+	/* Enable again the RX, if it was before */
+	if (channel->rx_enable)
+		iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
 }
 
 static void ipoctal_hangup(struct tty_struct *tty)
@@ -643,6 +610,7 @@ static void ipoctal_hangup(struct tty_struct *tty)
 	tty_port_hangup(&channel->tty_port);
 
 	iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+	channel->rx_enable = 0;
 	iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
 	iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
 	iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
@@ -652,6 +620,22 @@ static void ipoctal_hangup(struct tty_struct *tty)
 	wake_up_interruptible(&channel->tty_port.open_wait);
 }
 
+static void ipoctal_shutdown(struct tty_struct *tty)
+{
+	struct ipoctal_channel *channel = tty->driver_data;
+
+	if (channel == NULL)
+		return;
+
+	iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+	channel->rx_enable = 0;
+	iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_MR, &channel->regs->w.cr);
+	clear_bit(ASYNCB_INITIALIZED, &channel->tty_port.flags);
+}
+
 static const struct tty_operations ipoctal_fops = {
 	.ioctl =		NULL,
 	.open =			ipoctal_open,
@@ -662,6 +646,7 @@ static const struct tty_operations ipoctal_fops = {
 	.chars_in_buffer =	ipoctal_chars_in_buffer,
 	.get_icount =		ipoctal_get_icount,
 	.hangup =		ipoctal_hangup,
+	.shutdown =		ipoctal_shutdown,
 };
 
 static int ipoctal_probe(struct ipack_device *dev)