ipack: move header files to include/linux

Move ipack header files to include/linux/ directory where they belong.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 files changed, 5 insertions, 219 deletions

diff --git a/drivers/ipack/carriers/tpci200.h b/drivers/ipack/carriers/tpci200.h
index 8d9be27..a7a151d 100644
--- a/drivers/ipack/carriers/tpci200.h
+++ b/drivers/ipack/carriers/tpci200.h
@@ -20,8 +20,7 @@
 #include <linux/spinlock.h>
 #include <linux/swab.h>
 #include <linux/io.h>
-
-#include "../ipack.h"
+#include <linux/ipack.h>
 
 #define TPCI200_NB_SLOT               0x4
 #define TPCI200_NB_BAR                0x6
diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
index 783f120..7f568e2 100644
--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -22,7 +22,8 @@
 #include <linux/slab.h>
 #include <linux/atomic.h>
 #include <linux/io.h>
-#include "../ipack.h"
+#include <linux/ipack.h>
+#include "../ipack_ids.h"
 #include "ipoctal.h"
 #include "scc2698.h"
 
diff --git a/drivers/ipack/ipack.c b/drivers/ipack/ipack.c
index 6d5079d..cc54983 100644
--- a/drivers/ipack/ipack.c
+++ b/drivers/ipack/ipack.c
@@ -13,7 +13,8 @@
 #include <linux/slab.h>
 #include <linux/idr.h>
 #include <linux/io.h>
-#include "ipack.h"
+#include <linux/ipack.h>
+#include "ipack_ids.h"
 
 #define to_ipack_dev(device) container_of(device, struct ipack_device, dev)
 #define to_ipack_driver(drv) container_of(drv, struct ipack_driver, driver)
diff --git a/drivers/ipack/ipack.h b/drivers/ipack/ipack.h
deleted file mode 100644
index 6760bfa..0000000
--- a/drivers/ipack/ipack.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * Industry-pack bus.
- *
- * Copyright (C) 2011-2012 CERN (www.cern.ch)
- * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; version 2 of the License.
- */
-
-#include <linux/mod_devicetable.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-
-#include "ipack_ids.h"
-
-#define IPACK_IDPROM_OFFSET_I			0x01
-#define IPACK_IDPROM_OFFSET_P			0x03
-#define IPACK_IDPROM_OFFSET_A			0x05
-#define IPACK_IDPROM_OFFSET_C			0x07
-#define IPACK_IDPROM_OFFSET_MANUFACTURER_ID	0x09
-#define IPACK_IDPROM_OFFSET_MODEL		0x0B
-#define IPACK_IDPROM_OFFSET_REVISION		0x0D
-#define IPACK_IDPROM_OFFSET_RESERVED		0x0F
-#define IPACK_IDPROM_OFFSET_DRIVER_ID_L		0x11
-#define IPACK_IDPROM_OFFSET_DRIVER_ID_H		0x13
-#define IPACK_IDPROM_OFFSET_NUM_BYTES		0x15
-#define IPACK_IDPROM_OFFSET_CRC			0x17
-
-struct ipack_bus_ops;
-struct ipack_driver;
-
-enum ipack_space {
-	IPACK_IO_SPACE    = 0,
-	IPACK_ID_SPACE,
-	IPACK_INT_SPACE,
-	IPACK_MEM8_SPACE,
-	IPACK_MEM16_SPACE,
-	/* Dummy for counting the number of entries.  Must remain the last
-	 * entry */
-	IPACK_SPACE_COUNT,
-};
-
-/**
- */
-struct ipack_region {
-	phys_addr_t start;
-	size_t      size;
-};
-
-/**
- *	struct ipack_device
- *
- *	@slot: Slot where the device is plugged in the carrier board
- *	@bus: ipack_bus_device where the device is plugged to.
- *	@id_space: Virtual address to ID space.
- *	@io_space: Virtual address to IO space.
- *	@mem_space: Virtual address to MEM space.
- *	@dev: device in kernel representation.
- *
- * Warning: Direct access to mapped memory is possible but the endianness
- * is not the same with PCI carrier or VME carrier. The endianness is managed
- * by the carrier board throught bus->ops.
- */
-struct ipack_device {
-	unsigned int slot;
-	struct ipack_bus_device *bus;
-	struct device dev;
-	void (*release) (struct ipack_device *dev);
-	struct ipack_region      region[IPACK_SPACE_COUNT];
-	u8                      *id;
-	size_t			 id_avail;
-	u32			 id_vendor;
-	u32			 id_device;
-	u8			 id_format;
-	unsigned int		 id_crc_correct:1;
-	unsigned int		 speed_8mhz:1;
-	unsigned int		 speed_32mhz:1;
-};
-
-/**
- * struct ipack_driver_ops -- Callbacks to IPack device driver
- *
- * @probe:  Probe function
- * @remove: Prepare imminent removal of the device.  Services provided by the
- *          device should be revoked.
- */
-
-struct ipack_driver_ops {
-	int (*probe) (struct ipack_device *dev);
-	void (*remove) (struct ipack_device *dev);
-};
-
-/**
- * struct ipack_driver -- Specific data to each ipack device driver
- *
- * @driver: Device driver kernel representation
- * @ops:    Callbacks provided by the IPack device driver
- */
-struct ipack_driver {
-	struct device_driver driver;
-	const struct ipack_device_id *id_table;
-	const struct ipack_driver_ops *ops;
-};
-
-/**
- *	struct ipack_bus_ops - available operations on a bridge module
- *
- *	@map_space: map IP address space
- *	@unmap_space: unmap IP address space
- *	@request_irq: request IRQ
- *	@free_irq: free IRQ
- *	@get_clockrate: Returns the clockrate the carrier is currently
- *		communicating with the device at.
- *	@set_clockrate: Sets the clock-rate for carrier / module communication.
- *		Should return -EINVAL if the requested speed is not supported.
- *	@get_error: Returns the error state for the slot the device is attached
- *		to.
- *	@get_timeout: Returns 1 if the communication with the device has
- *		previously timed out.
- *	@reset_timeout: Resets the state returned by get_timeout.
- */
-struct ipack_bus_ops {
-	int (*request_irq) (struct ipack_device *dev,
-			    irqreturn_t (*handler)(void *), void *arg);
-	int (*free_irq) (struct ipack_device *dev);
-	int (*get_clockrate) (struct ipack_device *dev);
-	int (*set_clockrate) (struct ipack_device *dev, int mherz);
-	int (*get_error) (struct ipack_device *dev);
-	int (*get_timeout) (struct ipack_device *dev);
-	int (*reset_timeout) (struct ipack_device *dev);
-};
-
-/**
- *	struct ipack_bus_device
- *
- *	@dev: pointer to carrier device
- *	@slots: number of slots available
- *	@bus_nr: ipack bus number
- *	@ops: bus operations for the mezzanine drivers
- */
-struct ipack_bus_device {
-	struct device *parent;
-	int slots;
-	int bus_nr;
-	const struct ipack_bus_ops *ops;
-};
-
-/**
- *	ipack_bus_register -- register a new ipack bus
- *
- * @parent: pointer to the parent device, if any.
- * @slots: number of slots available in the bus device.
- * @ops: bus operations for the mezzanine drivers.
- *
- * The carrier board device should call this function to register itself as
- * available bus device in ipack.
- */
-struct ipack_bus_device *ipack_bus_register(struct device *parent, int slots,
-					    const struct ipack_bus_ops *ops);
-
-/**
- *	ipack_bus_unregister -- unregister an ipack bus
- */
-int ipack_bus_unregister(struct ipack_bus_device *bus);
-
-/**
- * ipack_driver_register -- Register a new ipack device driver
- *
- * Called by a ipack driver to register itself as a driver
- * that can manage ipack devices.
- */
-int ipack_driver_register(struct ipack_driver *edrv, struct module *owner,
-			  const char *name);
-void ipack_driver_unregister(struct ipack_driver *edrv);
-
-/**
- *	ipack_device_register -- register an IPack device with the kernel
- *	@dev: the new device to register.
- *
- *	Register a new IPack device ("module" in IndustryPack jargon). The call
- *	is done by the carrier driver.  The carrier should populate the fields
- *	bus and slot as well as the region array of @dev prior to calling this
- *	function.  The rest of the fields will be allocated and populated
- *	during registration.
- *
- *	Return zero on success or error code on failure.
- */
-int ipack_device_register(struct ipack_device *dev);
-void ipack_device_unregister(struct ipack_device *dev);
-
-/**
- * DEFINE_IPACK_DEVICE_TABLE - macro used to describe a IndustryPack table
- * @_table: device table name
- *
- * This macro is used to create a struct ipack_device_id array (a device table)
- * in a generic manner.
- */
-#define DEFINE_IPACK_DEVICE_TABLE(_table) \
-	const struct ipack_device_id _table[] __devinitconst
-
-/**
- * IPACK_DEVICE - macro used to describe a specific IndustryPack device
- * @_format: the format version (currently either 1 or 2, 8 bit value)
- * @vend:    the 8 or 24 bit IndustryPack Vendor ID
- * @dev:     the 8 or 16  bit IndustryPack Device ID
- *
- * This macro is used to create a struct ipack_device_id that matches a specific
- * device.
- */
-#define IPACK_DEVICE(_format, vend, dev) \
-	 .format = (_format), \
-	 .vendor = (vend), \
-	 .device = (dev)