summaryrefslogtreecommitdiffstats
path: root/drivers/ipack
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-02-21 13:57:13 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2013-02-21 13:57:13 -0800
commit7ed214ac2095f561a94335ca672b6c42a1ea40ff (patch)
treeda41901bff1d0d8d61170bf362384fdc61deb3ab /drivers/ipack
parent21eaab6d19ed43e82ed39c8deb7f192134fb4a0e (diff)
parent29e5507ae4ab34397f538f06b7070c81a4e4a2bf (diff)
downloadop-kernel-dev-7ed214ac2095f561a94335ca672b6c42a1ea40ff.zip
op-kernel-dev-7ed214ac2095f561a94335ca672b6c42a1ea40ff.tar.gz
Merge tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver patches from Greg Kroah-Hartman: "Here's the big char/misc driver patches for 3.9-rc1. Nothing major here, just lots of different driver updates (mei, hyperv, ipack, extcon, vmci, etc.). All of these have been in the linux-next tree for a while." * tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits) w1: w1_therm: Add force-pullup option for "broken" sensors w1: ds2482: Added 1-Wire pull-up support to the driver vme: add missing put_device() after device_register() fails extcon: max8997: Use workqueue to check cable state after completing boot of platform extcon: max8997: Set default UART/USB path on probe extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type extcon: max8997: Set default of ADC debounce time during initialization extcon: max8997: Remove duplicate code related to set H/W line path extcon: max8997: Move defined constant to header file extcon: max77693: Make max77693_extcon_cable static extcon: max8997: Remove unreachable code extcon: max8997: Make max8997_extcon_cable static extcon: max77693: Remove unnecessary goto statement to improve readability extcon: max77693: Convert to devm_input_allocate_device() extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style CREDITS: update email and address of Harald Hoyer extcon: arizona: Use MICDET for final microphone identification extcon: arizona: Always take the first HPDET reading as the final one extcon: arizona: Clear _trig_sts bits after jack detection extcon: arizona: Don't HPDET magic when headphones are enabled ...
Diffstat (limited to 'drivers/ipack')
-rw-r--r--drivers/ipack/devices/ipoctal.c113
1 files changed, 49 insertions, 64 deletions
diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
index ab20a08..141094e 100644
--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -20,7 +20,6 @@
#include <linux/serial.h>
#include <linux/tty_flip.h>
#include <linux/slab.h>
-#include <linux/atomic.h>
#include <linux/io.h>
#include <linux/ipack.h>
#include "ipoctal.h"
@@ -38,21 +37,19 @@ struct ipoctal_channel {
spinlock_t lock;
unsigned int pointer_read;
unsigned int pointer_write;
- atomic_t open;
struct tty_port tty_port;
union scc2698_channel __iomem *regs;
union scc2698_block __iomem *block_regs;
unsigned int board_id;
- unsigned char *board_write;
u8 isr_rx_rdy_mask;
u8 isr_tx_rdy_mask;
+ unsigned int rx_enable;
};
struct ipoctal {
struct ipack_device *dev;
unsigned int board_id;
struct ipoctal_channel channel[NR_CHANNELS];
- unsigned char write;
struct tty_driver *tty_drv;
u8 __iomem *mem8_space;
u8 __iomem *int_space;
@@ -64,28 +61,23 @@ static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty)
channel = dev_get_drvdata(tty->dev);
+ /*
+ * Enable RX. TX will be enabled when
+ * there is something to send
+ */
iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+ channel->rx_enable = 1;
return 0;
}
static int ipoctal_open(struct tty_struct *tty, struct file *file)
{
- int res;
struct ipoctal_channel *channel;
channel = dev_get_drvdata(tty->dev);
-
- if (atomic_read(&channel->open))
- return -EBUSY;
-
tty->driver_data = channel;
- res = tty_port_open(&channel->tty_port, tty, file);
- if (res)
- return res;
-
- atomic_inc(&channel->open);
- return 0;
+ return tty_port_open(&channel->tty_port, tty, file);
}
static void ipoctal_reset_stats(struct ipoctal_stats *stats)
@@ -111,9 +103,7 @@ static void ipoctal_close(struct tty_struct *tty, struct file *filp)
struct ipoctal_channel *channel = tty->driver_data;
tty_port_close(&channel->tty_port, tty, filp);
-
- if (atomic_dec_and_test(&channel->open))
- ipoctal_free_channel(channel);
+ ipoctal_free_channel(channel);
}
static int ipoctal_get_icount(struct tty_struct *tty,
@@ -137,11 +127,12 @@ static void ipoctal_irq_rx(struct ipoctal_channel *channel, u8 sr)
{
struct tty_port *port = &channel->tty_port;
unsigned char value;
- unsigned char flag = TTY_NORMAL;
+ unsigned char flag;
u8 isr;
do {
value = ioread8(&channel->regs->r.rhr);
+ flag = TTY_NORMAL;
/* Error: count statistics */
if (sr & SR_ERROR) {
iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
@@ -183,10 +174,8 @@ static void ipoctal_irq_tx(struct ipoctal_channel *channel)
unsigned char value;
unsigned int *pointer_write = &channel->pointer_write;
- if (channel->nb_bytes <= 0) {
- channel->nb_bytes = 0;
+ if (channel->nb_bytes == 0)
return;
- }
value = channel->tty_port.xmit_buf[*pointer_write];
iowrite8(value, &channel->regs->w.thr);
@@ -194,39 +183,27 @@ static void ipoctal_irq_tx(struct ipoctal_channel *channel)
(*pointer_write)++;
*pointer_write = *pointer_write % PAGE_SIZE;
channel->nb_bytes--;
-
- if ((channel->nb_bytes == 0) &&
- (waitqueue_active(&channel->queue))) {
-
- if (channel->board_id != IPACK1_DEVICE_ID_SBS_OCTAL_485) {
- *channel->board_write = 1;
- wake_up_interruptible(&channel->queue);
- }
- }
}
static void ipoctal_irq_channel(struct ipoctal_channel *channel)
{
u8 isr, sr;
- /* If there is no client, skip the check */
- if (!atomic_read(&channel->open))
- return;
-
+ spin_lock(&channel->lock);
/* The HW is organized in pair of channels. See which register we need
* to read from */
isr = ioread8(&channel->block_regs->r.isr);
sr = ioread8(&channel->regs->r.sr);
- /* In case of RS-485, change from TX to RX when finishing TX.
- * Half-duplex. */
- if ((channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) &&
- (sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) {
+ if ((sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) {
iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
- iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr);
- iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
- *channel->board_write = 1;
- wake_up_interruptible(&channel->queue);
+ /* In case of RS-485, change from TX to RX when finishing TX.
+ * Half-duplex. */
+ if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) {
+ iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr);
+ iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+ channel->rx_enable = 1;
+ }
}
/* RX data */
@@ -237,7 +214,7 @@ static void ipoctal_irq_channel(struct ipoctal_channel *channel)
if ((isr & channel->isr_tx_rdy_mask) && (sr & SR_TX_READY))
ipoctal_irq_tx(channel);
- tty_flip_buffer_push(&channel->tty_port);
+ spin_unlock(&channel->lock);
}
static irqreturn_t ipoctal_irq_handler(void *arg)
@@ -245,14 +222,14 @@ static irqreturn_t ipoctal_irq_handler(void *arg)
unsigned int i;
struct ipoctal *ipoctal = (struct ipoctal *) arg;
- /* Check all channels */
- for (i = 0; i < NR_CHANNELS; i++)
- ipoctal_irq_channel(&ipoctal->channel[i]);
-
/* Clear the IPack device interrupt */
readw(ipoctal->int_space + ACK_INT_REQ0);
readw(ipoctal->int_space + ACK_INT_REQ1);
+ /* Check all channels */
+ for (i = 0; i < NR_CHANNELS; i++)
+ ipoctal_irq_channel(&ipoctal->channel[i]);
+
return IRQ_HANDLED;
}
@@ -306,7 +283,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
ipoctal->mem8_space =
devm_ioremap_nocache(&ipoctal->dev->dev,
region->start, 0x8000);
- if (!addr) {
+ if (!ipoctal->mem8_space) {
dev_err(&ipoctal->dev->dev,
"Unable to map slot [%d:%d] MEM8 space!\n",
bus_nr, slot);
@@ -319,7 +296,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
struct ipoctal_channel *channel = &ipoctal->channel[i];
channel->regs = chan_regs + i;
channel->block_regs = block_regs + (i >> 1);
- channel->board_write = &ipoctal->write;
channel->board_id = ipoctal->board_id;
if (i & 1) {
channel->isr_tx_rdy_mask = ISR_TxRDY_B;
@@ -330,6 +306,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
}
iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+ channel->rx_enable = 0;
iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
iowrite8(MR1_CHRL_8_BITS | MR1_ERROR_CHAR | MR1_RxINT_RxRDY,
@@ -402,8 +379,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
ipoctal_reset_stats(&channel->stats);
channel->nb_bytes = 0;
- init_waitqueue_head(&channel->queue);
-
spin_lock_init(&channel->lock);
channel->pointer_read = 0;
channel->pointer_write = 0;
@@ -414,12 +389,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
continue;
}
dev_set_drvdata(tty_dev, channel);
-
- /*
- * Enable again the RX. TX will be enabled when
- * there is something to send
- */
- iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
}
return 0;
@@ -459,6 +428,7 @@ static int ipoctal_write_tty(struct tty_struct *tty,
/* As the IP-OCTAL 485 only supports half duplex, do it manually */
if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) {
iowrite8(CR_DISABLE_RX, &channel->regs->w.cr);
+ channel->rx_enable = 0;
iowrite8(CR_CMD_ASSERT_RTSN, &channel->regs->w.cr);
}
@@ -467,10 +437,6 @@ static int ipoctal_write_tty(struct tty_struct *tty,
* operations
*/
iowrite8(CR_ENABLE_TX, &channel->regs->w.cr);
- wait_event_interruptible(channel->queue, *channel->board_write);
- iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
-
- *channel->board_write = 0;
return char_copied;
}
@@ -622,8 +588,9 @@ static void ipoctal_set_termios(struct tty_struct *tty,
iowrite8(mr2, &channel->regs->w.mr);
iowrite8(csr, &channel->regs->w.csr);
- /* Enable again the RX */
- iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+ /* Enable again the RX, if it was before */
+ if (channel->rx_enable)
+ iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
}
static void ipoctal_hangup(struct tty_struct *tty)
@@ -643,6 +610,7 @@ static void ipoctal_hangup(struct tty_struct *tty)
tty_port_hangup(&channel->tty_port);
iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+ channel->rx_enable = 0;
iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
@@ -652,6 +620,22 @@ static void ipoctal_hangup(struct tty_struct *tty)
wake_up_interruptible(&channel->tty_port.open_wait);
}
+static void ipoctal_shutdown(struct tty_struct *tty)
+{
+ struct ipoctal_channel *channel = tty->driver_data;
+
+ if (channel == NULL)
+ return;
+
+ iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+ channel->rx_enable = 0;
+ iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
+ iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
+ iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
+ iowrite8(CR_CMD_RESET_MR, &channel->regs->w.cr);
+ clear_bit(ASYNCB_INITIALIZED, &channel->tty_port.flags);
+}
+
static const struct tty_operations ipoctal_fops = {
.ioctl = NULL,
.open = ipoctal_open,
@@ -662,6 +646,7 @@ static const struct tty_operations ipoctal_fops = {
.chars_in_buffer = ipoctal_chars_in_buffer,
.get_icount = ipoctal_get_icount,
.hangup = ipoctal_hangup,
+ .shutdown = ipoctal_shutdown,
};
static int ipoctal_probe(struct ipack_device *dev)
OpenPOWER on IntegriCloud