summaryrefslogtreecommitdiffstats
path: root/drivers/ipack/devices
diff options
context:
space:
mode:
authorFederico Vaga <federico.vaga@cern.ch>2014-09-01 13:49:56 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-09-23 23:26:42 -0700
commit95e838c915edbdde366d111905245171ac99c2cc (patch)
tree16f44db4a8158f2f61c96c13e6a69f47f3e49d57 /drivers/ipack/devices
parent1451f414639465995dfc1f820aa1a64723cbd662 (diff)
downloadop-kernel-dev-95e838c915edbdde366d111905245171ac99c2cc.zip
op-kernel-dev-95e838c915edbdde366d111905245171ac99c2cc.tar.gz
ipoctal: clear break interrupt as soon as it occurs
In some condition we receive the break interrupt but nothing is putted in the Rx FIFO and the correspondend bit in the status register is not set. Thus, no-one clear the interrupt and the handler will be called forever. This patch clear the break interrupt as soon as it occurs. Then, if the break character '\0' is putted in the fifo we will manage it. We can also unmask the Break interrupt but its bit in ISR is still set on break. So I think is better to keep the registers clean. Signed-off-by: Federico Vaga <federico.vaga@cern.ch> Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/ipack/devices')
-rw-r--r--drivers/ipack/devices/ipoctal.c4
1 files changed, 3 insertions, 1 deletions
diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
index 4270081..035d544 100644
--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -175,7 +175,6 @@ static void ipoctal_irq_rx(struct ipoctal_channel *channel, u8 sr)
flag = TTY_FRAME;
}
if (sr & SR_RECEIVED_BREAK) {
- iowrite8(CR_CMD_RESET_BREAK_CHANGE, &channel->regs->w.cr);
channel->stats.rcv_break++;
flag = TTY_BREAK;
}
@@ -220,6 +219,9 @@ static void ipoctal_irq_channel(struct ipoctal_channel *channel)
isr = ioread8(&channel->block_regs->r.isr);
sr = ioread8(&channel->regs->r.sr);
+ if (isr & (IMR_DELTA_BREAK_A | IMR_DELTA_BREAK_B))
+ iowrite8(CR_CMD_RESET_BREAK_CHANGE, &channel->regs->w.cr);
+
if ((sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) {
iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
/* In case of RS-485, change from TX to RX when finishing TX.
OpenPOWER on IntegriCloud