Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 core updates from Ingo Molnar:
 "There were so many changes in the x86/asm, x86/apic and x86/mm topics
  in this cycle that the topical separation of -tip broke down somewhat -
  so the result is a more traditional architecture pull request,
  collected into the 'x86/core' topic.

  The topics were still maintained separately as far as possible, so
  bisectability and conceptual separation should still be pretty good -
  but there were a handful of merge points to avoid excessive
  dependencies (and conflicts) that would have been poorly tested in the
  end.

  The next cycle will hopefully be much more quiet (or at least will
  have fewer dependencies).

  The main changes in this cycle were:

   * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
     Gleixner)

     - This is the second and most intrusive part of changes to the x86
       interrupt handling - full conversion to hierarchical interrupt
       domains:

          [IOAPIC domain]   -----
                                 |
          [MSI domain]      --------[Remapping domain] ----- [ Vector domain ]
                                 |   (optional)          |
          [HPET MSI domain] -----                        |
                                                         |
          [DMAR domain]     -----------------------------
                                                         |
          [Legacy domain]   -----------------------------

       This now reflects the actual hardware and allowed us to distangle
       the domain specific code from the underlying parent domain, which
       can be optional in the case of interrupt remapping.  It's a clear
       separation of functionality and removes quite some duct tape
       constructs which plugged the remap code between ioapic/msi/hpet
       and the vector management.

     - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
       injection into guests (Feng Wu)

   * x86/asm changes:

     - Tons of cleanups and small speedups, micro-optimizations.  This
       is in preparation to move a good chunk of the low level entry
       code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
       Brian Gerst)

     - Moved all system entry related code to a new home under
       arch/x86/entry/ (Ingo Molnar)

     - Removal of the fragile and ugly CFI dwarf debuginfo annotations.
       Conversion to C will reintroduce many of them - but meanwhile
       they are only getting in the way, and the upstream kernel does
       not rely on them (Ingo Molnar)

     - NOP handling refinements. (Borislav Petkov)

   * x86/mm changes:

     - Big PAT and MTRR rework: making the code more robust and
       preparing to phase out exposing direct MTRR interfaces to drivers -
       in favor of using PAT driven interfaces (Toshi Kani, Luis R
       Rodriguez, Borislav Petkov)

     - New ioremap_wt()/set_memory_wt() interfaces to support
       Write-Through cached memory mappings.  This is especially
       important for good performance on NVDIMM hardware (Toshi Kani)

   * x86/ras changes:

     - Add support for deferred errors on AMD (Aravind Gopalakrishnan)

       This is an important RAS feature which adds hardware support for
       poisoned data.  That means roughly that the hardware marks data
       which it has detected as corrupted but wasn't able to correct, as
       poisoned data and raises an APIC interrupt to signal that in the
       form of a deferred error.  It is the OS's responsibility then to
       take proper recovery action and thus prolonge system lifetime as
       far as possible.

     - Add support for Intel "Local MCE"s: upcoming CPUs will support
       CPU-local MCE interrupts, as opposed to the traditional system-
       wide broadcasted MCE interrupts (Ashok Raj)

     - Misc cleanups (Borislav Petkov)

   * x86/platform changes:

     - Intel Atom SoC updates

  ... and lots of other cleanups, fixlets and other changes - see the
  shortlog and the Git log for details"

* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
  x86/hpet: Use proper hpet device number for MSI allocation
  x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
  x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
  x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
  x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
  genirq: Prevent crash in irq_move_irq()
  genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
  iommu, x86: Properly handle posted interrupts for IOMMU hotplug
  iommu, x86: Provide irq_remapping_cap() interface
  iommu, x86: Setup Posted-Interrupts capability for Intel iommu
  iommu, x86: Add cap_pi_support() to detect VT-d PI capability
  iommu, x86: Avoid migrating VT-d posted interrupts
  iommu, x86: Save the mode (posted or remapped) of an IRTE
  iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
  iommu: dmar: Provide helper to copy shared irte fields
  iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
  iommu: Add new member capability to struct irq_remap_ops
  x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
  x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
  x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
  ...

1 files changed, 40 insertions, 213 deletions

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 390079e..2d99930 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -6,6 +6,7 @@
 #include <linux/msi.h>
 #include <linux/irq.h>
 #include <linux/pci.h>
+#include <linux/irqdomain.h>
 
 #include <asm/hw_irq.h>
 #include <asm/irq_remapping.h>
@@ -21,21 +22,11 @@ int irq_remap_broken;
 int disable_sourceid_checking;
 int no_x2apic_optout;
 
+int disable_irq_post = 1;
+
 static int disable_irq_remap;
 static struct irq_remap_ops *remap_ops;
 
-static int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec);
-static int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
-				  int index, int sub_handle);
-static int set_remapped_irq_affinity(struct irq_data *data,
-				     const struct cpumask *mask,
-				     bool force);
-
-static bool irq_remapped(struct irq_cfg *cfg)
-{
-	return (cfg->remapped == 1);
-}
-
 static void irq_remapping_disable_io_apic(void)
 {
 	/*
@@ -49,117 +40,9 @@ static void irq_remapping_disable_io_apic(void)
 		disconnect_bsp_APIC(0);
 }
 
-static int do_setup_msi_irqs(struct pci_dev *dev, int nvec)
-{
-	int ret, sub_handle, nvec_pow2, index = 0;
-	unsigned int irq;
-	struct msi_desc *msidesc;
-
-	msidesc = list_entry(dev->msi_list.next, struct msi_desc, list);
-
-	irq = irq_alloc_hwirqs(nvec, dev_to_node(&dev->dev));
-	if (irq == 0)
-		return -ENOSPC;
-
-	nvec_pow2 = __roundup_pow_of_two(nvec);
-	for (sub_handle = 0; sub_handle < nvec; sub_handle++) {
-		if (!sub_handle) {
-			index = msi_alloc_remapped_irq(dev, irq, nvec_pow2);
-			if (index < 0) {
-				ret = index;
-				goto error;
-			}
-		} else {
-			ret = msi_setup_remapped_irq(dev, irq + sub_handle,
-						     index, sub_handle);
-			if (ret < 0)
-				goto error;
-		}
-		ret = setup_msi_irq(dev, msidesc, irq, sub_handle);
-		if (ret < 0)
-			goto error;
-	}
-	return 0;
-
-error:
-	irq_free_hwirqs(irq, nvec);
-
-	/*
-	 * Restore altered MSI descriptor fields and prevent just destroyed
-	 * IRQs from tearing down again in default_teardown_msi_irqs()
-	 */
-	msidesc->irq = 0;
-
-	return ret;
-}
-
-static int do_setup_msix_irqs(struct pci_dev *dev, int nvec)
-{
-	int node, ret, sub_handle, index = 0;
-	struct msi_desc *msidesc;
-	unsigned int irq;
-
-	node		= dev_to_node(&dev->dev);
-	sub_handle	= 0;
-
-	list_for_each_entry(msidesc, &dev->msi_list, list) {
-
-		irq = irq_alloc_hwirq(node);
-		if (irq == 0)
-			return -1;
-
-		if (sub_handle == 0)
-			ret = index = msi_alloc_remapped_irq(dev, irq, nvec);
-		else
-			ret = msi_setup_remapped_irq(dev, irq, index, sub_handle);
-
-		if (ret < 0)
-			goto error;
-
-		ret = setup_msi_irq(dev, msidesc, irq, 0);
-		if (ret < 0)
-			goto error;
-
-		sub_handle += 1;
-		irq        += 1;
-	}
-
-	return 0;
-
-error:
-	irq_free_hwirq(irq);
-	return ret;
-}
-
-static int irq_remapping_setup_msi_irqs(struct pci_dev *dev,
-					int nvec, int type)
-{
-	if (type == PCI_CAP_ID_MSI)
-		return do_setup_msi_irqs(dev, nvec);
-	else
-		return do_setup_msix_irqs(dev, nvec);
-}
-
-static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
-{
-	/*
-	 * Intr-remapping uses pin number as the virtual vector
-	 * in the RTE. Actual vector is programmed in
-	 * intr-remapping table entry. Hence for the io-apic
-	 * EOI we use the pin number.
-	 */
-	io_apic_eoi(apic, pin);
-}
-
 static void __init irq_remapping_modify_x86_ops(void)
 {
 	x86_io_apic_ops.disable		= irq_remapping_disable_io_apic;
-	x86_io_apic_ops.set_affinity	= set_remapped_irq_affinity;
-	x86_io_apic_ops.setup_entry	= setup_ioapic_remapped_entry;
-	x86_io_apic_ops.eoi_ioapic_pin	= eoi_ioapic_pin_remapped;
-	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
-	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
-	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
 }
 
 static __init int setup_nointremap(char *str)
@@ -198,6 +81,15 @@ void set_irq_remapping_broken(void)
 	irq_remap_broken = 1;
 }
 
+bool irq_remapping_cap(enum irq_remap_cap cap)
+{
+	if (!remap_ops || disable_irq_post)
+		return 0;
+
+	return (remap_ops->capability & (1 << cap));
+}
+EXPORT_SYMBOL_GPL(irq_remapping_cap);
+
 int __init irq_remapping_prepare(void)
 {
 	if (disable_irq_remap)
@@ -254,113 +146,48 @@ int __init irq_remap_enable_fault_handling(void)
 	return remap_ops->enable_faulting();
 }
 
-int setup_ioapic_remapped_entry(int irq,
-				struct IO_APIC_route_entry *entry,
-				unsigned int destination, int vector,
-				struct io_apic_irq_attr *attr)
-{
-	if (!remap_ops->setup_ioapic_entry)
-		return -ENODEV;
-
-	return remap_ops->setup_ioapic_entry(irq, entry, destination,
-					     vector, attr);
-}
-
-static int set_remapped_irq_affinity(struct irq_data *data,
-				     const struct cpumask *mask, bool force)
-{
-	if (!config_enabled(CONFIG_SMP) || !remap_ops->set_affinity)
-		return 0;
-
-	return remap_ops->set_affinity(data, mask, force);
-}
-
-void free_remapped_irq(int irq)
-{
-	struct irq_cfg *cfg = irq_cfg(irq);
-
-	if (irq_remapped(cfg) && remap_ops->free_irq)
-		remap_ops->free_irq(irq);
-}
-
-void compose_remapped_msi_msg(struct pci_dev *pdev,
-			      unsigned int irq, unsigned int dest,
-			      struct msi_msg *msg, u8 hpet_id)
-{
-	struct irq_cfg *cfg = irq_cfg(irq);
-
-	if (!irq_remapped(cfg))
-		native_compose_msi_msg(pdev, irq, dest, msg, hpet_id);
-	else if (remap_ops->compose_msi_msg)
-		remap_ops->compose_msi_msg(pdev, irq, dest, msg, hpet_id);
-}
-
-static int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec)
-{
-	if (!remap_ops->msi_alloc_irq)
-		return -ENODEV;
-
-	return remap_ops->msi_alloc_irq(pdev, irq, nvec);
-}
-
-static int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
-				  int index, int sub_handle)
-{
-	if (!remap_ops->msi_setup_irq)
-		return -ENODEV;
-
-	return remap_ops->msi_setup_irq(pdev, irq, index, sub_handle);
-}
-
-int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
-{
-	int ret;
-
-	if (!remap_ops->alloc_hpet_msi)
-		return -ENODEV;
-
-	ret = remap_ops->alloc_hpet_msi(irq, id);
-	if (ret)
-		return -EINVAL;
-
-	return default_setup_hpet_msi(irq, id);
-}
-
 void panic_if_irq_remap(const char *msg)
 {
 	if (irq_remapping_enabled)
 		panic(msg);
 }
 
-static void ir_ack_apic_edge(struct irq_data *data)
+void ir_ack_apic_edge(struct irq_data *data)
 {
 	ack_APIC_irq();
 }
 
-static void ir_ack_apic_level(struct irq_data *data)
+/**
+ * irq_remapping_get_ir_irq_domain - Get the irqdomain associated with the IOMMU
+ *				     device serving request @info
+ * @info: interrupt allocation information, used to identify the IOMMU device
+ *
+ * It's used to get parent irqdomain for HPET and IOAPIC irqdomains.
+ * Returns pointer to IRQ domain, or NULL on failure.
+ */
+struct irq_domain *
+irq_remapping_get_ir_irq_domain(struct irq_alloc_info *info)
 {
-	ack_APIC_irq();
-	eoi_ioapic_irq(data->irq, irqd_cfg(data));
-}
+	if (!remap_ops || !remap_ops->get_ir_irq_domain)
+		return NULL;
 
-static void ir_print_prefix(struct irq_data *data, struct seq_file *p)
-{
-	seq_printf(p, " IR-%s", data->chip->name);
+	return remap_ops->get_ir_irq_domain(info);
 }
 
-void irq_remap_modify_chip_defaults(struct irq_chip *chip)
+/**
+ * irq_remapping_get_irq_domain - Get the irqdomain serving the request @info
+ * @info: interrupt allocation information, used to identify the IOMMU device
+ *
+ * There will be one PCI MSI/MSIX irqdomain associated with each interrupt
+ * remapping device, so this interface is used to retrieve the PCI MSI/MSIX
+ * irqdomain serving request @info.
+ * Returns pointer to IRQ domain, or NULL on failure.
+ */
+struct irq_domain *
+irq_remapping_get_irq_domain(struct irq_alloc_info *info)
 {
-	chip->irq_print_chip = ir_print_prefix;
-	chip->irq_ack = ir_ack_apic_edge;
-	chip->irq_eoi = ir_ack_apic_level;
-	chip->irq_set_affinity = x86_io_apic_ops.set_affinity;
-}
+	if (!remap_ops || !remap_ops->get_irq_domain)
+		return NULL;
 
-bool setup_remapped_irq(int irq, struct irq_cfg *cfg, struct irq_chip *chip)
-{
-	if (!irq_remapped(cfg))
-		return false;
-	irq_set_status_flags(irq, IRQ_MOVE_PCNTXT);
-	irq_remap_modify_chip_defaults(chip);
-	return true;
+	return remap_ops->get_irq_domain(info);
 }