Merge branch 'next' into for-linus

114 files changed, 2855 insertions, 1320 deletions

diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 3325979..55f7e57 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -25,10 +25,6 @@ config INPUT
 
 if INPUT
 
-config INPUT_OF_MATRIX_KEYMAP
-	depends on USE_OF
-	bool
-
 config INPUT_FF_MEMLESS
 	tristate "Support for memoryless force-feedback devices"
 	help
@@ -68,6 +64,19 @@ config INPUT_SPARSEKMAP
 	  To compile this driver as a module, choose M here: the
 	  module will be called sparse-keymap.
 
+config INPUT_MATRIXKMAP
+	tristate "Matrix keymap support library"
+	help
+	  Say Y here if you are using a driver for an input
+	  device that uses matrix keymap. This option is only
+	  useful for out-of-tree drivers since in-tree drivers
+	  select it automatically.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called matrix-keymap.
+
 comment "Userland interfaces"
 
 config INPUT_MOUSEDEV
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index b173a13a..5ca3f63 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -10,6 +10,7 @@ input-core-y := input.o input-compat.o input-mt.o ff-core.o
 obj-$(CONFIG_INPUT_FF_MEMLESS)	+= ff-memless.o
 obj-$(CONFIG_INPUT_POLLDEV)	+= input-polldev.o
 obj-$(CONFIG_INPUT_SPARSEKMAP)	+= sparse-keymap.o
+obj-$(CONFIG_INPUT_MATRIXKMAP)	+= matrix-keymap.o
 
 obj-$(CONFIG_INPUT_MOUSEDEV)	+= mousedev.o
 obj-$(CONFIG_INPUT_JOYDEV)	+= joydev.o
@@ -24,4 +25,3 @@ obj-$(CONFIG_INPUT_TOUCHSCREEN)	+= touchscreen/
 obj-$(CONFIG_INPUT_MISC)	+= misc/
 
 obj-$(CONFIG_INPUT_APMPOWER)	+= apm-power.o
-obj-$(CONFIG_INPUT_OF_MATRIX_KEYMAP) += of_keymap.o
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 4b2e10d..6c58bff 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -180,7 +180,10 @@ static int evdev_grab(struct evdev *evdev, struct evdev_client *client)
 
 static int evdev_ungrab(struct evdev *evdev, struct evdev_client *client)
 {
-	if (evdev->grab != client)
+	struct evdev_client *grab = rcu_dereference_protected(evdev->grab,
+					lockdep_is_held(&evdev->mutex));
+
+	if (grab != client)
 		return  -EINVAL;
 
 	rcu_assign_pointer(evdev->grab, NULL);
@@ -259,8 +262,7 @@ static int evdev_release(struct inode *inode, struct file *file)
 	struct evdev *evdev = client->evdev;
 
 	mutex_lock(&evdev->mutex);
-	if (evdev->grab == client)
-		evdev_ungrab(evdev, client);
+	evdev_ungrab(evdev, client);
 	mutex_unlock(&evdev->mutex);
 
 	evdev_detach_client(evdev, client);
@@ -343,7 +345,7 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer,
 	struct input_event event;
 	int retval = 0;
 
-	if (count < input_event_size())
+	if (count != 0 && count < input_event_size())
 		return -EINVAL;
 
 	retval = mutex_lock_interruptible(&evdev->mutex);
@@ -355,7 +357,8 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer,
 		goto out;
 	}
 
-	do {
+	while (retval + input_event_size() <= count) {
+
 		if (input_event_from_user(buffer + retval, &event)) {
 			retval = -EFAULT;
 			goto out;
@@ -364,7 +367,7 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer,
 
 		input_inject_event(&evdev->handle,
 				   event.type, event.code, event.value);
-	} while (retval + input_event_size() <= count);
+	}
 
  out:
 	mutex_unlock(&evdev->mutex);
@@ -395,35 +398,49 @@ static ssize_t evdev_read(struct file *file, char __user *buffer,
 	struct evdev_client *client = file->private_data;
 	struct evdev *evdev = client->evdev;
 	struct input_event event;
-	int retval = 0;
+	size_t read = 0;
+	int error;
 
-	if (count < input_event_size())
+	if (count != 0 && count < input_event_size())
 		return -EINVAL;
 
-	if (!(file->f_flags & O_NONBLOCK)) {
-		retval = wait_event_interruptible(evdev->wait,
-				client->packet_head != client->tail ||
-				!evdev->exist);
-		if (retval)
-			return retval;
-	}
+	for (;;) {
+		if (!evdev->exist)
+			return -ENODEV;
 
-	if (!evdev->exist)
-		return -ENODEV;
+		if (client->packet_head == client->tail &&
+		    (file->f_flags & O_NONBLOCK))
+			return -EAGAIN;
 
-	while (retval + input_event_size() <= count &&
-	       evdev_fetch_next_event(client, &event)) {
+		/*
+		 * count == 0 is special - no IO is done but we check
+		 * for error conditions (see above).
+		 */
+		if (count == 0)
+			break;
 
-		if (input_event_to_user(buffer + retval, &event))
-			return -EFAULT;
+		while (read + input_event_size() <= count &&
+		       evdev_fetch_next_event(client, &event)) {
 
-		retval += input_event_size();
-	}
+			if (input_event_to_user(buffer + read, &event))
+				return -EFAULT;
 
-	if (retval == 0 && (file->f_flags & O_NONBLOCK))
-		return -EAGAIN;
+			read += input_event_size();
+		}
 
-	return retval;
+		if (read)
+			break;
+
+		if (!(file->f_flags & O_NONBLOCK)) {
+			error = wait_event_interruptible(evdev->wait,
+					client->packet_head != client->tail ||
+					!evdev->exist);
+			if (error)
+				return error;
+		}
+	}
+
+	return read;
 }
 
 /* No kernel lock - fine */
diff --git a/drivers/input/gameport/emu10k1-gp.c b/drivers/input/gameport/emu10k1-gp.c
index 422aa0a..daceafe 100644
--- a/drivers/input/gameport/emu10k1-gp.c
+++ b/drivers/input/gameport/emu10k1-gp.c
@@ -125,15 +125,4 @@ static struct pci_driver emu_driver = {
         .remove =       __devexit_p(emu_remove),
 };
 
-static int __init emu_init(void)
-{
-	return pci_register_driver(&emu_driver);
-}
-
-static void __exit emu_exit(void)
-{
-	pci_unregister_driver(&emu_driver);
-}
-
-module_init(emu_init);
-module_exit(emu_exit);
+module_pci_driver(emu_driver);
diff --git a/drivers/input/gameport/fm801-gp.c b/drivers/input/gameport/fm801-gp.c
index a3b70ff..48ad382 100644
--- a/drivers/input/gameport/fm801-gp.c
+++ b/drivers/input/gameport/fm801-gp.c
@@ -144,6 +144,7 @@ static const struct pci_device_id fm801_gp_id_table[] = {
 	{ PCI_VENDOR_ID_FORTEMEDIA, PCI_DEVICE_ID_FM801_GP, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0  },
 	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, fm801_gp_id_table);
 
 static struct pci_driver fm801_gp_driver = {
 	.name =		"FM801_gameport",
@@ -152,20 +153,7 @@ static struct pci_driver fm801_gp_driver = {
 	.remove =	__devexit_p(fm801_gp_remove),
 };
 
-static int __init fm801_gp_init(void)
-{
-	return pci_register_driver(&fm801_gp_driver);
-}
-
-static void __exit fm801_gp_exit(void)
-{
-	pci_unregister_driver(&fm801_gp_driver);
-}
-
-module_init(fm801_gp_init);
-module_exit(fm801_gp_exit);
-
-MODULE_DEVICE_TABLE(pci, fm801_gp_id_table);
+module_pci_driver(fm801_gp_driver);
 
 MODULE_DESCRIPTION("FM801 gameport driver");
 MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index c351aa4..da739d9 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -449,7 +449,6 @@ static ssize_t gameport_rebind_driver(struct device *dev, struct device_attribut
 	} else if ((drv = driver_find(buf, &gameport_bus)) != NULL) {
 		gameport_disconnect_port(gameport);
 		error = gameport_bind_driver(gameport, to_gameport_driver(drv));
-		put_driver(drv);
 	} else {
 		error = -EINVAL;
 	}
diff --git a/drivers/input/input-compat.c b/drivers/input/input-compat.c
index e46a867..64ca711 100644
--- a/drivers/input/input-compat.c
+++ b/drivers/input/input-compat.c
@@ -17,7 +17,7 @@
 int input_event_from_user(const char __user *buffer,
 			  struct input_event *event)
 {
-	if (INPUT_COMPAT_TEST) {
+	if (INPUT_COMPAT_TEST && !COMPAT_USE_64BIT_TIME) {
 		struct input_event_compat compat_event;
 
 		if (copy_from_user(&compat_event, buffer,
@@ -41,7 +41,7 @@ int input_event_from_user(const char __user *buffer,
 int input_event_to_user(char __user *buffer,
 			const struct input_event *event)
 {
-	if (INPUT_COMPAT_TEST) {
+	if (INPUT_COMPAT_TEST && !COMPAT_USE_64BIT_TIME) {
 		struct input_event_compat compat_event;
 
 		compat_event.time.tv_sec = event->time.tv_sec;
diff --git a/drivers/input/input-compat.h b/drivers/input/input-compat.h
index 22be27b..148f66f 100644
--- a/drivers/input/input-compat.h
+++ b/drivers/input/input-compat.h
@@ -67,7 +67,7 @@ struct ff_effect_compat {
 
 static inline size_t input_event_size(void)
 {
-	return INPUT_COMPAT_TEST ?
+	return (INPUT_COMPAT_TEST && !COMPAT_USE_64BIT_TIME) ?
 		sizeof(struct input_event_compat) : sizeof(struct input_event);
 }
 
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index c24ec2d..26043cc 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -13,7 +13,6 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <asm/io.h>
-#include <asm/system.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/joystick.h>
diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c
index 1639ab2..85bc8dc 100644
--- a/drivers/input/joystick/a3d.c
+++ b/drivers/input/joystick/a3d.c
@@ -413,15 +413,4 @@ static struct gameport_driver a3d_drv = {
 	.disconnect	= a3d_disconnect,
 };
 
-static int __init a3d_init(void)
-{
-	return gameport_register_driver(&a3d_drv);
-}
-
-static void __exit a3d_exit(void)
-{
-	gameport_unregister_driver(&a3d_drv);
-}
-
-module_init(a3d_init);
-module_exit(a3d_exit);
+module_gameport_driver(a3d_drv);
diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c
index b992fbf..0cbfd2d 100644
--- a/drivers/input/joystick/adi.c
+++ b/drivers/input/joystick/adi.c
@@ -557,10 +557,6 @@ static void adi_disconnect(struct gameport *gameport)
 	kfree(port);
 }
 
-/*
- * The gameport device structure.
- */
-
 static struct gameport_driver adi_drv = {
 	.driver		= {
 		.name	= "adi",
@@ -570,15 +566,4 @@ static struct gameport_driver adi_drv = {
 	.disconnect	= adi_disconnect,
 };
 
-static int __init adi_init(void)
-{
-	return gameport_register_driver(&adi_drv);
-}
-
-static void __exit adi_exit(void)
-{
-	gameport_unregister_driver(&adi_drv);
-}
-
-module_init(adi_init);
-module_exit(adi_exit);
+module_gameport_driver(adi_drv);
diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c
index 3aa93bf..c65b5fa 100644
--- a/drivers/input/joystick/amijoy.c
+++ b/drivers/input/joystick/amijoy.c
@@ -35,7 +35,6 @@
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
 
-#include <asm/system.h>
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
 
diff --git a/drivers/input/joystick/cobra.c b/drivers/input/joystick/cobra.c
index 3497b87..65367e4 100644
--- a/drivers/input/joystick/cobra.c
+++ b/drivers/input/joystick/cobra.c
@@ -261,15 +261,4 @@ static struct gameport_driver cobra_drv = {
 	.disconnect	= cobra_disconnect,
 };
 
-static int __init cobra_init(void)
-{
-	return gameport_register_driver(&cobra_drv);
-}
-
-static void __exit cobra_exit(void)
-{
-	gameport_unregister_driver(&cobra_drv);
-}
-
-module_init(cobra_init);
-module_exit(cobra_exit);
+module_gameport_driver(cobra_drv);
diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c
index 0536b1b..ab1cf28 100644
--- a/drivers/input/joystick/gf2k.c
+++ b/drivers/input/joystick/gf2k.c
@@ -373,15 +373,4 @@ static struct gameport_driver gf2k_drv = {
 	.disconnect	= gf2k_disconnect,
 };
 
-static int __init gf2k_init(void)
-{
-	return gameport_register_driver(&gf2k_drv);
-}
-
-static void __exit gf2k_exit(void)
-{
-	gameport_unregister_driver(&gf2k_drv);
-}
-
-module_init(gf2k_init);
-module_exit(gf2k_exit);
+module_gameport_driver(gf2k_drv);
diff --git a/drivers/input/joystick/grip.c b/drivers/input/joystick/grip.c
index fc55899..9e1beff 100644
--- a/drivers/input/joystick/grip.c
+++ b/drivers/input/joystick/grip.c
@@ -424,15 +424,4 @@ static struct gameport_driver grip_drv = {
 	.disconnect	= grip_disconnect,
 };
 
-static int __init grip_init(void)
-{
-	return gameport_register_driver(&grip_drv);
-}
-
-static void __exit grip_exit(void)
-{
-	gameport_unregister_driver(&grip_drv);
-}
-
-module_init(grip_init);
-module_exit(grip_exit);
+module_gameport_driver(grip_drv);
diff --git a/drivers/input/joystick/grip_mp.c b/drivers/input/joystick/grip_mp.c
index 2d47baf..c0f9c7b 100644
--- a/drivers/input/joystick/grip_mp.c
+++ b/drivers/input/joystick/grip_mp.c
@@ -687,15 +687,4 @@ static struct gameport_driver grip_drv = {
 	.disconnect	= grip_disconnect,
 };
 
-static int __init grip_init(void)
-{
-	return gameport_register_driver(&grip_drv);
-}
-
-static void __exit grip_exit(void)
-{
-	gameport_unregister_driver(&grip_drv);
-}
-
-module_init(grip_init);
-module_exit(grip_exit);
+module_gameport_driver(grip_drv);
diff --git a/drivers/input/joystick/guillemot.c b/drivers/input/joystick/guillemot.c
index 4058d4b..55196f7 100644
--- a/drivers/input/joystick/guillemot.c
+++ b/drivers/input/joystick/guillemot.c
@@ -281,15 +281,4 @@ static struct gameport_driver guillemot_drv = {
 	.disconnect	= guillemot_disconnect,
 };
 
-static int __init guillemot_init(void)
-{
-	return gameport_register_driver(&guillemot_drv);
-}
-
-static void __exit guillemot_exit(void)
-{
-	gameport_unregister_driver(&guillemot_drv);
-}
-
-module_init(guillemot_init);
-module_exit(guillemot_exit);
+module_gameport_driver(guillemot_drv);
diff --git a/drivers/input/joystick/interact.c b/drivers/input/joystick/interact.c
index 16fb19d..88c2262 100644
--- a/drivers/input/joystick/interact.c
+++ b/drivers/input/joystick/interact.c
@@ -311,15 +311,4 @@ static struct gameport_driver interact_drv = {
 	.disconnect	= interact_disconnect,
 };
 
-static int __init interact_init(void)
-{
-	return gameport_register_driver(&interact_drv);
-}
-
-static void __exit interact_exit(void)
-{
-	gameport_unregister_driver(&interact_drv);
-}
-
-module_init(interact_init);
-module_exit(interact_exit);
+module_gameport_driver(interact_drv);
diff --git a/drivers/input/joystick/joydump.c b/drivers/input/joystick/joydump.c
index cd894a0..7eb878b 100644
--- a/drivers/input/joystick/joydump.c
+++ b/drivers/input/joystick/joydump.c
@@ -159,15 +159,4 @@ static struct gameport_driver joydump_drv = {
 	.disconnect	= joydump_disconnect,
 };
 
-static int __init joydump_init(void)
-{
-	return gameport_register_driver(&joydump_drv);
-}
-
-static void __exit joydump_exit(void)
-{
-	gameport_unregister_driver(&joydump_drv);
-}
-
-module_init(joydump_init);
-module_exit(joydump_exit);
+module_gameport_driver(joydump_drv);
diff --git a/drivers/input/joystick/magellan.c b/drivers/input/joystick/magellan.c
index 40e4078..9fb153e 100644
--- a/drivers/input/joystick/magellan.c
+++ b/drivers/input/joystick/magellan.c
@@ -222,19 +222,4 @@ static struct serio_driver magellan_drv = {
 	.disconnect	= magellan_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init magellan_init(void)
-{
-	return serio_register_driver(&magellan_drv);
-}
-
-static void __exit magellan_exit(void)
-{
-	serio_unregister_driver(&magellan_drv);
-}
-
-module_init(magellan_init);
-module_exit(magellan_exit);
+module_serio_driver(magellan_drv);
diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c
index b8d8611..04c69af 100644
--- a/drivers/input/joystick/sidewinder.c
+++ b/drivers/input/joystick/sidewinder.c
@@ -820,15 +820,4 @@ static struct gameport_driver sw_drv = {
 	.disconnect	= sw_disconnect,
 };
 
-static int __init sw_init(void)
-{
-	return gameport_register_driver(&sw_drv);
-}
-
-static void __exit sw_exit(void)
-{
-	gameport_unregister_driver(&sw_drv);
-}
-
-module_init(sw_init);
-module_exit(sw_exit);
+module_gameport_driver(sw_drv);
diff --git a/drivers/input/joystick/spaceball.c b/drivers/input/joystick/spaceball.c
index 0cd9b29..80a7b27 100644
--- a/drivers/input/joystick/spaceball.c
+++ b/drivers/input/joystick/spaceball.c
@@ -296,19 +296,4 @@ static struct serio_driver spaceball_drv = {
 	.disconnect	= spaceball_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init spaceball_init(void)
-{
-	return serio_register_driver(&spaceball_drv);
-}
-
-static void __exit spaceball_exit(void)
-{
-	serio_unregister_driver(&spaceball_drv);
-}
-
-module_init(spaceball_init);
-module_exit(spaceball_exit);
+module_serio_driver(spaceball_drv);
diff --git a/drivers/input/joystick/spaceorb.c b/drivers/input/joystick/spaceorb.c
index a694bf8..a41f291 100644
--- a/drivers/input/joystick/spaceorb.c
+++ b/drivers/input/joystick/spaceorb.c
@@ -237,19 +237,4 @@ static struct serio_driver spaceorb_drv = {
 	.disconnect	= spaceorb_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init spaceorb_init(void)
-{
-	return serio_register_driver(&spaceorb_drv);
-}
-
-static void __exit spaceorb_exit(void)
-{
-	serio_unregister_driver(&spaceorb_drv);
-}
-
-module_init(spaceorb_init);
-module_exit(spaceorb_exit);
+module_serio_driver(spaceorb_drv);
diff --git a/drivers/input/joystick/stinger.c b/drivers/input/joystick/stinger.c
index e0db9f5..0f51a60 100644
--- a/drivers/input/joystick/stinger.c
+++ b/drivers/input/joystick/stinger.c
@@ -208,19 +208,4 @@ static struct serio_driver stinger_drv = {
 	.disconnect	= stinger_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init stinger_init(void)
-{
-	return serio_register_driver(&stinger_drv);
-}
-
-static void __exit stinger_exit(void)
-{
-	serio_unregister_driver(&stinger_drv);
-}
-
-module_init(stinger_init);
-module_exit(stinger_exit);
+module_serio_driver(stinger_drv);
diff --git a/drivers/input/joystick/tmdc.c b/drivers/input/joystick/tmdc.c
index d6c6098..5ef9bcd 100644
--- a/drivers/input/joystick/tmdc.c
+++ b/drivers/input/joystick/tmdc.c
@@ -436,15 +436,4 @@ static struct gameport_driver tmdc_drv = {
 	.disconnect	= tmdc_disconnect,
 };
 
-static int __init tmdc_init(void)
-{
-	return gameport_register_driver(&tmdc_drv);
-}
-
-static void __exit tmdc_exit(void)
-{
-	gameport_unregister_driver(&tmdc_drv);
-}
-
-module_init(tmdc_init);
-module_exit(tmdc_exit);
+module_gameport_driver(tmdc_drv);
diff --git a/drivers/input/joystick/twidjoy.c b/drivers/input/joystick/twidjoy.c
index 3f4ec73..2556a81 100644
--- a/drivers/input/joystick/twidjoy.c
+++ b/drivers/input/joystick/twidjoy.c
@@ -257,19 +257,4 @@ static struct serio_driver twidjoy_drv = {
 	.disconnect	= twidjoy_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init twidjoy_init(void)
-{
-	return serio_register_driver(&twidjoy_drv);
-}
-
-static void __exit twidjoy_exit(void)
-{
-	serio_unregister_driver(&twidjoy_drv);
-}
-
-module_init(twidjoy_init);
-module_exit(twidjoy_exit);
+module_serio_driver(twidjoy_drv);
diff --git a/drivers/input/joystick/warrior.c b/drivers/input/joystick/warrior.c
index f72c83e..23b3071 100644
--- a/drivers/input/joystick/warrior.c
+++ b/drivers/input/joystick/warrior.c
@@ -217,19 +217,4 @@ static struct serio_driver warrior_drv = {
 	.disconnect	= warrior_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init warrior_init(void)
-{
-	return serio_register_driver(&warrior_drv);
-}
-
-static void __exit warrior_exit(void)
-{
-	serio_unregister_driver(&warrior_drv);
-}
-
-module_init(warrior_init);
-module_exit(warrior_exit);
+module_serio_driver(warrior_drv);
diff --git a/drivers/input/joystick/zhenhua.c b/drivers/input/joystick/zhenhua.c
index b585312..c4de438 100644
--- a/drivers/input/joystick/zhenhua.c
+++ b/drivers/input/joystick/zhenhua.c
@@ -225,19 +225,4 @@ static struct serio_driver zhenhua_drv = {
 	.disconnect	= zhenhua_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init zhenhua_init(void)
-{
-	return serio_register_driver(&zhenhua_drv);
-}
-
-static void __exit zhenhua_exit(void)
-{
-	serio_unregister_driver(&zhenhua_drv);
-}
-
-module_init(zhenhua_init);
-module_exit(zhenhua_exit);
+module_serio_driver(zhenhua_drv);
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index f354813..c0e11ecc 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -166,6 +166,7 @@ config KEYBOARD_LKKBD
 config KEYBOARD_EP93XX
 	tristate "EP93xx Matrix Keypad support"
 	depends on ARCH_EP93XX
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here to enable the matrix keypad on the Cirrus EP93XX.
 
@@ -224,6 +225,7 @@ config KEYBOARD_TCA6416
 config KEYBOARD_TCA8418
 	tristate "TCA8418 Keypad Support"
 	depends on I2C
+	select INPUT_MATRIXKMAP
 	help
 	  This driver implements basic keypad functionality
 	  for keys connected through TCA8418 keypad decoder.
@@ -240,6 +242,7 @@ config KEYBOARD_TCA8418
 config KEYBOARD_MATRIX
 	tristate "GPIO driven matrix keypad support"
 	depends on GENERIC_GPIO
+	select INPUT_MATRIXKMAP
 	help
 	  Enable support for GPIO driven matrix keypad.
 
@@ -309,6 +312,17 @@ config KEYBOARD_LM8323
 	  To compile this driver as a module, choose M here: the
 	  module will be called lm8323.
 
+config KEYBOARD_LM8333
+	tristate "LM8333 keypad chip"
+	depends on I2C
+	select INPUT_MATRIXKMAP
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  LM8333 keypad controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lm8333.
+
 config KEYBOARD_LOCOMO
 	tristate "LoCoMo Keyboard Support"
 	depends on SHARP_LOCOMO
@@ -366,6 +380,7 @@ config KEYBOARD_MPR121
 config KEYBOARD_IMX
 	tristate "IMX keypad support"
 	depends on ARCH_MXC
+	select INPUT_MATRIXKMAP
 	help
 	  Enable support for IMX keypad port.
 
@@ -384,6 +399,7 @@ config KEYBOARD_NEWTON
 config KEYBOARD_NOMADIK
 	tristate "ST-Ericsson Nomadik SKE keyboard"
 	depends on PLAT_NOMADIK
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use a keypad provided on the SKE controller
 	  used on the Ux500 and Nomadik platforms
@@ -394,7 +410,7 @@ config KEYBOARD_NOMADIK
 config KEYBOARD_TEGRA
 	tristate "NVIDIA Tegra internal matrix keyboard controller support"
 	depends on ARCH_TEGRA
-	select INPUT_OF_MATRIX_KEYMAP if USE_OF
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use a matrix keyboard connected directly
 	  to the internal keyboard controller on Tegra SoCs.
@@ -432,6 +448,7 @@ config KEYBOARD_PXA930_ROTARY
 config KEYBOARD_PMIC8XXX
 	tristate "Qualcomm PMIC8XXX keypad support"
 	depends on MFD_PM8XXX
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to enable the driver for the PMIC8XXX
 	  keypad provided as a reference design from Qualcomm. This is intended
@@ -443,6 +460,7 @@ config KEYBOARD_PMIC8XXX
 config KEYBOARD_SAMSUNG
 	tristate "Samsung keypad support"
 	depends on HAVE_CLK
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the keypad on your Samsung mobile
 	  device.
@@ -485,6 +503,7 @@ config KEYBOARD_SH_KEYSC
 config KEYBOARD_STMPE
 	tristate "STMPE keypad support"
 	depends on MFD_STMPE
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the keypad controller on STMPE I/O
 	  expanders.
@@ -505,6 +524,7 @@ config KEYBOARD_DAVINCI
 config KEYBOARD_OMAP
 	tristate "TI OMAP keypad support"
 	depends on (ARCH_OMAP1 || ARCH_OMAP2)
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the OMAP keypad.
 
@@ -512,9 +532,10 @@ config KEYBOARD_OMAP
 	  module will be called omap-keypad.
 
 config KEYBOARD_OMAP4
-	tristate "TI OMAP4 keypad support"
+	tristate "TI OMAP4+ keypad support"
+	select INPUT_MATRIXKMAP
 	help
-	  Say Y here if you want to use the OMAP4 keypad.
+	  Say Y here if you want to use the OMAP4+ keypad.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap4-keypad.
@@ -522,6 +543,7 @@ config KEYBOARD_OMAP4
 config KEYBOARD_SPEAR
 	tristate "ST SPEAR keyboard support"
 	depends on PLAT_SPEAR
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the SPEAR keyboard.
 
@@ -531,6 +553,7 @@ config KEYBOARD_SPEAR
 config KEYBOARD_TC3589X
 	tristate "TC3589X Keypad support"
 	depends on MFD_TC3589X
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the keypad controller on
 	  TC35892/3 I/O expander.
@@ -541,6 +564,7 @@ config KEYBOARD_TC3589X
 config KEYBOARD_TNETV107X
 	tristate "TI TNETV107X keypad support"
 	depends on ARCH_DAVINCI_TNETV107X
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the TNETV107X keypad.
 
@@ -550,6 +574,7 @@ config KEYBOARD_TNETV107X
 config KEYBOARD_TWL4030
 	tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
 	depends on TWL4030_CORE
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if your board use the keypad controller on
 	  TWL4030 family chips.  It's safe to say enable this
@@ -573,6 +598,7 @@ config KEYBOARD_XTKBD
 config KEYBOARD_W90P910
 	tristate "W90P910 Matrix Keypad support"
 	depends on ARCH_W90X900
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here to enable the matrix keypad on evaluation board
 	  based on W90P910.
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index df7061f..b03b024 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
 obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
 obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
 obj-$(CONFIG_KEYBOARD_LM8323)		+= lm8323.o
+obj-$(CONFIG_KEYBOARD_LM8333)		+= lm8333.o
 obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
 obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 39ebffa..b083bf1 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -197,6 +197,7 @@ static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad)
 	kpad->gc.base = gpio_data->gpio_start;
 	kpad->gc.label = kpad->client->name;
 	kpad->gc.owner = THIS_MODULE;
+	kpad->gc.names = gpio_data->names;
 
 	mutex_init(&kpad->gpio_lock);
 
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index e05a2e7..add5ffd 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -433,7 +433,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 		if (printk_ratelimit())
 			dev_warn(&serio->dev,
 				 "Spurious %s on %s. "
-				 "Some program might be trying access hardware directly.\n",
+				 "Some program might be trying to access hardware directly.\n",
 				 data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
 		goto out;
 	case ATKBD_RET_ERR:
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index 0ba69f3..c46fc81 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -182,16 +182,10 @@ static void ep93xx_keypad_close(struct input_dev *pdev)
 }
 
 
-#ifdef CONFIG_PM
-/*
- * NOTE: I don't know if this is correct, or will work on the ep93xx.
- *
- * None of the existing ep93xx drivers have power management support.
- * But, this is basically what the pxa27x_keypad driver does.
- */
-static int ep93xx_keypad_suspend(struct platform_device *pdev,
-				 pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int ep93xx_keypad_suspend(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = keypad->input_dev;
 
@@ -210,8 +204,9 @@ static int ep93xx_keypad_suspend(struct platform_device *pdev,
 	return 0;
 }
 
-static int ep93xx_keypad_resume(struct platform_device *pdev)
+static int ep93xx_keypad_resume(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = keypad->input_dev;
 
@@ -232,10 +227,10 @@ static int ep93xx_keypad_resume(struct platform_device *pdev)
 
 	return 0;
 }
-#else	/* !CONFIG_PM */
-#define ep93xx_keypad_suspend	NULL
-#define ep93xx_keypad_resume	NULL
-#endif	/* !CONFIG_PM */
+#endif
+
+static SIMPLE_DEV_PM_OPS(ep93xx_keypad_pm_ops,
+			 ep93xx_keypad_suspend, ep93xx_keypad_resume);
 
 static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
 {
@@ -308,19 +303,16 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
 	input_dev->open = ep93xx_keypad_open;
 	input_dev->close = ep93xx_keypad_close;
 	input_dev->dev.parent = &pdev->dev;
-	input_dev->keycode = keypad->keycodes;
-	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
-	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
 
-	input_set_drvdata(input_dev, keypad);
+	err = matrix_keypad_build_keymap(keymap_data, NULL,
+					 EP93XX_MATRIX_ROWS, EP93XX_MATRIX_COLS,
+					 keypad->keycodes, input_dev);
+	if (err)
+		goto failed_free_dev;
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
 	if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT)
-		input_dev->evbit[0] |= BIT_MASK(EV_REP);
-
-	matrix_keypad_build_keymap(keymap_data, 3,
-				   input_dev->keycode, input_dev->keybit);
-	platform_set_drvdata(pdev, keypad);
+		__set_bit(EV_REP, input_dev->evbit);
+	input_set_drvdata(input_dev, keypad);
 
 	err = request_irq(keypad->irq, ep93xx_keypad_irq_handler,
 			  0, pdev->name, keypad);
@@ -331,6 +323,7 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
 	if (err)
 		goto failed_free_irq;
 
+	platform_set_drvdata(pdev, keypad);
 	device_init_wakeup(&pdev->dev, 1);
 
 	return 0;
@@ -384,11 +377,10 @@ static struct platform_driver ep93xx_keypad_driver = {
 	.driver		= {
 		.name	= "ep93xx-keypad",
 		.owner	= THIS_MODULE,
+		.pm	= &ep93xx_keypad_pm_ops,
 	},
 	.probe		= ep93xx_keypad_probe,
 	.remove		= __devexit_p(ep93xx_keypad_remove),
-	.suspend	= ep93xx_keypad_suspend,
-	.resume		= ep93xx_keypad_resume,
 };
 module_platform_driver(ep93xx_keypad_driver);
 
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index fed31e0..589e3c2 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -583,15 +583,4 @@ static struct serio_driver hil_serio_drv = {
 	.interrupt	= hil_dev_interrupt
 };
 
-static int __init hil_dev_init(void)
-{
-	return serio_register_driver(&hil_serio_drv);
-}
-
-static void __exit hil_dev_exit(void)
-{
-	serio_unregister_driver(&hil_serio_drv);
-}
-
-module_init(hil_dev_init);
-module_exit(hil_dev_exit);
+module_serio_driver(hil_serio_drv);
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index fb87b3b..6ee7421 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -481,7 +481,7 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
 	}
 
 	if (keypad->rows_en_mask > ((1 << MAX_MATRIX_KEY_ROWS) - 1) ||
-	   keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) {
+	    keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) {
 		dev_err(&pdev->dev,
 			"invalid key data (too many rows or colums)\n");
 		error = -EINVAL;
@@ -496,14 +496,17 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
 	input_dev->dev.parent = &pdev->dev;
 	input_dev->open = imx_keypad_open;
 	input_dev->close = imx_keypad_close;
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
-	input_dev->keycode = keypad->keycodes;
-	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
-	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
 
-	matrix_keypad_build_keymap(keymap_data, MATRIX_ROW_SHIFT,
-				keypad->keycodes, input_dev->keybit);
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   MAX_MATRIX_KEY_ROWS,
+					   MAX_MATRIX_KEY_COLS,
+					   keypad->keycodes, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto failed_clock_put;
+	}
 
+	__set_bit(EV_REP, input_dev->evbit);
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 	input_set_drvdata(input_dev, keypad);
 
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index eeafc30..9d639fa 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -27,6 +27,7 @@
 
 #include <mach/jornada720.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver");
diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c
index fa9bb6d..fc0a63c 100644
--- a/drivers/input/keyboard/lkkbd.c
+++ b/drivers/input/keyboard/lkkbd.c
@@ -731,19 +731,4 @@ static struct serio_driver lkkbd_drv = {
 	.interrupt	= lkkbd_interrupt,
 };
 
-/*
- * The functions for insering/removing us as a module.
- */
-static int __init lkkbd_init(void)
-{
-	return serio_register_driver(&lkkbd_drv);
-}
-
-static void __exit lkkbd_exit(void)
-{
-	serio_unregister_driver(&lkkbd_drv);
-}
-
-module_init(lkkbd_init);
-module_exit(lkkbd_exit);
-
+module_serio_driver(lkkbd_drv);
diff --git a/drivers/input/keyboard/lm8333.c b/drivers/input/keyboard/lm8333.c
new file mode 100644
index 0000000..ca168a6
--- /dev/null
+++ b/drivers/input/keyboard/lm8333.c
@@ -0,0 +1,235 @@
+/*
+ * LM8333 keypad driver
+ * Copyright (C) 2012 Wolfram Sang, Pengutronix <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/input/lm8333.h>
+
+#define LM8333_FIFO_READ		0x20
+#define LM8333_DEBOUNCE			0x22
+#define LM8333_READ_INT			0xD0
+#define LM8333_ACTIVE			0xE4
+#define LM8333_READ_ERROR		0xF0
+
+#define LM8333_KEYPAD_IRQ		(1 << 0)
+#define LM8333_ERROR_IRQ		(1 << 3)
+
+#define LM8333_ERROR_KEYOVR		0x04
+#define LM8333_ERROR_FIFOOVR		0x40
+
+#define LM8333_FIFO_TRANSFER_SIZE	16
+
+#define LM8333_NUM_ROWS		8
+#define LM8333_NUM_COLS		16
+#define LM8333_ROW_SHIFT	4
+
+struct lm8333 {
+	struct i2c_client *client;
+	struct input_dev *input;
+	unsigned short keycodes[LM8333_NUM_ROWS << LM8333_ROW_SHIFT];
+};
+
+/* The accessors try twice because the first access may be needed for wakeup */
+#define LM8333_READ_RETRIES 2
+
+int lm8333_read8(struct lm8333 *lm8333, u8 cmd)
+{
+	int retries = 0, ret;
+
+	do {
+		ret = i2c_smbus_read_byte_data(lm8333->client, cmd);
+	} while (ret < 0 && retries++ < LM8333_READ_RETRIES);
+
+	return ret;
+}
+
+int lm8333_write8(struct lm8333 *lm8333, u8 cmd, u8 val)
+{
+	int retries = 0, ret;
+
+	do {
+		ret = i2c_smbus_write_byte_data(lm8333->client, cmd, val);
+	} while (ret < 0 && retries++ < LM8333_READ_RETRIES);
+
+	return ret;
+}
+
+int lm8333_read_block(struct lm8333 *lm8333, u8 cmd, u8 len, u8 *buf)
+{
+	int retries = 0, ret;
+
+	do {
+		ret = i2c_smbus_read_i2c_block_data(lm8333->client,
+						    cmd, len, buf);
+	} while (ret < 0 && retries++ < LM8333_READ_RETRIES);
+
+	return ret;
+}
+
+static void lm8333_key_handler(struct lm8333 *lm8333)
+{
+	struct input_dev *input = lm8333->input;
+	u8 keys[LM8333_FIFO_TRANSFER_SIZE];
+	u8 code, pressed;
+	int i, ret;
+
+	ret = lm8333_read_block(lm8333, LM8333_FIFO_READ,
+				LM8333_FIFO_TRANSFER_SIZE, keys);
+	if (ret != LM8333_FIFO_TRANSFER_SIZE) {
+		dev_err(&lm8333->client->dev,
+			"Error %d while reading FIFO\n", ret);
+		return;
+	}
+
+	for (i = 0; keys[i] && i < LM8333_FIFO_TRANSFER_SIZE; i++) {
+		pressed = keys[i] & 0x80;
+		code = keys[i] & 0x7f;
+
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, lm8333->keycodes[code], pressed);
+	}
+
+	input_sync(input);
+}
+
+static irqreturn_t lm8333_irq_thread(int irq, void *data)
+{
+	struct lm8333 *lm8333 = data;
+	u8 status = lm8333_read8(lm8333, LM8333_READ_INT);
+
+	if (!status)
+		return IRQ_NONE;
+
+	if (status & LM8333_ERROR_IRQ) {
+		u8 err = lm8333_read8(lm8333, LM8333_READ_ERROR);
+
+		if (err & (LM8333_ERROR_KEYOVR | LM8333_ERROR_FIFOOVR)) {
+			u8 dummy[LM8333_FIFO_TRANSFER_SIZE];
+
+			lm8333_read_block(lm8333, LM8333_FIFO_READ,
+					LM8333_FIFO_TRANSFER_SIZE, dummy);
+		}
+		dev_err(&lm8333->client->dev, "Got error %02x\n", err);
+	}
+
+	if (status & LM8333_KEYPAD_IRQ)
+		lm8333_key_handler(lm8333);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit lm8333_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	const struct lm8333_platform_data *pdata = client->dev.platform_data;
+	struct lm8333 *lm8333;
+	struct input_dev *input;
+	int err, active_time;
+
+	if (!pdata)
+		return -EINVAL;
+
+	active_time = pdata->active_time ?: 500;
+	if (active_time / 3 <= pdata->debounce_time / 3) {
+		dev_err(&client->dev, "Active time not big enough!\n");
+		return -EINVAL;
+	}
+
+	lm8333 = kzalloc(sizeof(*lm8333), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!lm8333 || !input) {
+		err = -ENOMEM;
+		goto free_mem;
+	}
+
+	lm8333->client = client;
+	lm8333->input = input;
+
+	input->name = client->name;
+	input->dev.parent = &client->dev;
+	input->id.bustype = BUS_I2C;
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	err = matrix_keypad_build_keymap(pdata->matrix_data, NULL,
+					 LM8333_NUM_ROWS, LM8333_NUM_COLS,
+					 lm8333->keycodes, input);
+	if (err)
+		goto free_mem;
+
+	if (pdata->debounce_time) {
+		err = lm8333_write8(lm8333, LM8333_DEBOUNCE,
+				    pdata->debounce_time / 3);
+		if (err)
+			dev_warn(&client->dev, "Unable to set debounce time\n");
+	}
+
+	if (pdata->active_time) {
+		err = lm8333_write8(lm8333, LM8333_ACTIVE,
+				    pdata->active_time / 3);
+		if (err)
+			dev_warn(&client->dev, "Unable to set active time\n");
+	}
+
+	err = request_threaded_irq(client->irq, NULL, lm8333_irq_thread,
+				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				   "lm8333", lm8333);
+	if (err)
+		goto free_mem;
+
+	err = input_register_device(input);
+	if (err)
+		goto free_irq;
+
+	i2c_set_clientdata(client, lm8333);
+	return 0;
+
+ free_irq:
+	free_irq(client->irq, lm8333);
+ free_mem:
+	input_free_device(input);
+	kfree(lm8333);
+	return err;
+}
+
+static int __devexit lm8333_remove(struct i2c_client *client)
+{
+	struct lm8333 *lm8333 = i2c_get_clientdata(client);
+
+	free_irq(client->irq, lm8333);
+	input_unregister_device(lm8333->input);
+	kfree(lm8333);
+
+	return 0;
+}
+
+static const struct i2c_device_id lm8333_id[] = {
+	{ "lm8333", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm8333_id);
+
+static struct i2c_driver lm8333_driver = {
+	.driver = {
+		.name		= "lm8333",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= lm8333_probe,
+	.remove		= __devexit_p(lm8333_remove),
+	.id_table	= lm8333_id,
+};
+module_i2c_driver(lm8333_driver);
+
+MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
+MODULE_DESCRIPTION("LM8333 keyboard driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 9b223d7..18b7237 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -27,7 +27,6 @@
 struct matrix_keypad {
 	const struct matrix_keypad_platform_data *pdata;
 	struct input_dev *input_dev;
-	unsigned short *keycodes;
 	unsigned int row_shift;
 
 	DECLARE_BITMAP(disabled_gpios, MATRIX_MAX_ROWS);
@@ -38,6 +37,8 @@ struct matrix_keypad {
 	bool scan_pending;
 	bool stopped;
 	bool gpio_all_disabled;
+
+	unsigned short keycodes[];
 };
 
 /*
@@ -224,7 +225,7 @@ static void matrix_keypad_stop(struct input_dev *dev)
 	disable_row_irqs(keypad);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad)
 {
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
@@ -293,16 +294,16 @@ static int matrix_keypad_resume(struct device *dev)
 
 	return 0;
 }
-
-static const SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops,
-				matrix_keypad_suspend, matrix_keypad_resume);
 #endif
 
-static int __devinit init_matrix_gpio(struct platform_device *pdev,
-					struct matrix_keypad *keypad)
+static SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops,
+			 matrix_keypad_suspend, matrix_keypad_resume);
+
+static int __devinit matrix_keypad_init_gpio(struct platform_device *pdev,
+					     struct matrix_keypad *keypad)
 {
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
-	int i, err = -EINVAL;
+	int i, err;
 
 	/* initialized strobe lines as outputs, activated */
 	for (i = 0; i < pdata->num_col_gpios; i++) {
@@ -348,8 +349,7 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,
 					"matrix-keypad", keypad);
 			if (err) {
 				dev_err(&pdev->dev,
-					"Unable to acquire interrupt "
-					"for GPIO line %i\n",
+					"Unable to acquire interrupt for GPIO line %i\n",
 					pdata->row_gpios[i]);
 				goto err_free_irqs;
 			}
@@ -375,14 +375,33 @@ err_free_cols:
 	return err;
 }
 
+static void matrix_keypad_free_gpio(struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	if (pdata->clustered_irq > 0) {
+		free_irq(pdata->clustered_irq, keypad);
+	} else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+	}
+
+	for (i = 0; i < pdata->num_row_gpios; i++)
+		gpio_free(pdata->row_gpios[i]);
+
+	for (i = 0; i < pdata->num_col_gpios; i++)
+		gpio_free(pdata->col_gpios[i]);
+}
+
 static int __devinit matrix_keypad_probe(struct platform_device *pdev)
 {
 	const struct matrix_keypad_platform_data *pdata;
 	const struct matrix_keymap_data *keymap_data;
 	struct matrix_keypad *keypad;
 	struct input_dev *input_dev;
-	unsigned short *keycodes;
 	unsigned int row_shift;
+	size_t keymap_size;
 	int err;
 
 	pdata = pdev->dev.platform_data;
@@ -398,20 +417,18 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
 	}
 
 	row_shift = get_count_order(pdata->num_col_gpios);
-
-	keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
-	keycodes = kzalloc((pdata->num_row_gpios << row_shift) *
-				sizeof(*keycodes),
-			   GFP_KERNEL);
+	keymap_size = (pdata->num_row_gpios << row_shift) *
+			sizeof(keypad->keycodes[0]);
+	keypad = kzalloc(sizeof(struct matrix_keypad) + keymap_size,
+			 GFP_KERNEL);
 	input_dev = input_allocate_device();
-	if (!keypad || !keycodes || !input_dev) {
+	if (!keypad || !input_dev) {
 		err = -ENOMEM;
 		goto err_free_mem;
 	}
 
 	keypad->input_dev = input_dev;
 	keypad->pdata = pdata;
-	keypad->keycodes = keycodes;
 	keypad->row_shift = row_shift;
 	keypad->stopped = true;
 	INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
@@ -420,38 +437,38 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
 	input_dev->name		= pdev->name;
 	input_dev->id.bustype	= BUS_HOST;
 	input_dev->dev.parent	= &pdev->dev;
-	input_dev->evbit[0]	= BIT_MASK(EV_KEY);
-	if (!pdata->no_autorepeat)
-		input_dev->evbit[0] |= BIT_MASK(EV_REP);
 	input_dev->open		= matrix_keypad_start;
 	input_dev->close	= matrix_keypad_stop;
 
-	input_dev->keycode	= keycodes;
-	input_dev->keycodesize	= sizeof(*keycodes);
-	input_dev->keycodemax	= pdata->num_row_gpios << row_shift;
-
-	matrix_keypad_build_keymap(keymap_data, row_shift,
-				   input_dev->keycode, input_dev->keybit);
+	err = matrix_keypad_build_keymap(keymap_data, NULL,
+					 pdata->num_row_gpios,
+					 pdata->num_col_gpios,
+					 keypad->keycodes, input_dev);
+	if (err)
+		goto err_free_mem;
 
+	if (!pdata->no_autorepeat)
+		__set_bit(EV_REP, input_dev->evbit);
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 	input_set_drvdata(input_dev, keypad);
 
-	err = init_matrix_gpio(pdev, keypad);
+	err = matrix_keypad_init_gpio(pdev, keypad);
 	if (err)
 		goto err_free_mem;
 
 	err = input_register_device(keypad->input_dev);
 	if (err)
-		goto err_free_mem;
+		goto err_free_gpio;
 
 	device_init_wakeup(&pdev->dev, pdata->wakeup);
 	platform_set_drvdata(pdev, keypad);
 
 	return 0;
 
+err_free_gpio:
+	matrix_keypad_free_gpio(keypad);
 err_free_mem:
 	input_free_device(input_dev);
-	kfree(keycodes);
 	kfree(keypad);
 	return err;
 }
@@ -459,29 +476,15 @@ err_free_mem:
 static int __devexit matrix_keypad_remove(struct platform_device *pdev)
 {
 	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
-	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
-	int i;
 
 	device_init_wakeup(&pdev->dev, 0);
 
-	if (pdata->clustered_irq > 0) {
-		free_irq(pdata->clustered_irq, keypad);
-	} else {
-		for (i = 0; i < pdata->num_row_gpios; i++)
-			free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
-	}
-
-	for (i = 0; i < pdata->num_row_gpios; i++)
-		gpio_free(pdata->row_gpios[i]);
-
-	for (i = 0; i < pdata->num_col_gpios; i++)
-		gpio_free(pdata->col_gpios[i]);
-
+	matrix_keypad_free_gpio(keypad);
 	input_unregister_device(keypad->input_dev);
-	platform_set_drvdata(pdev, NULL);
-	kfree(keypad->keycodes);
 	kfree(keypad);
 
+	platform_set_drvdata(pdev, NULL);
+
 	return 0;
 }
 
@@ -491,9 +494,7 @@ static struct platform_driver matrix_keypad_driver = {
 	.driver		= {
 		.name	= "matrix-keypad",
 		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
 		.pm	= &matrix_keypad_pm_ops,
-#endif
 	},
 };
 module_platform_driver(matrix_keypad_driver);
diff --git a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c
index 48d1cab..f971898 100644
--- a/drivers/input/keyboard/newtonkbd.c
+++ b/drivers/input/keyboard/newtonkbd.c
@@ -166,15 +166,4 @@ static struct serio_driver nkbd_drv = {
 	.disconnect	= nkbd_disconnect,
 };
 
-static int __init nkbd_init(void)
-{
-	return serio_register_driver(&nkbd_drv);
-}
-
-static void __exit nkbd_exit(void)
-{
-	serio_unregister_driver(&nkbd_drv);
-}
-
-module_init(nkbd_init);
-module_exit(nkbd_exit);
+module_serio_driver(nkbd_drv);
diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c
index 101e245..4ea4341 100644
--- a/drivers/input/keyboard/nomadik-ske-keypad.c
+++ b/drivers/input/keyboard/nomadik-ske-keypad.c
@@ -39,7 +39,8 @@
 #define SKE_KPRISA	(0x1 << 2)
 
 #define SKE_KEYPAD_ROW_SHIFT	3
-#define SKE_KPD_KEYMAP_SIZE	(8 * 8)
+#define SKE_KPD_NUM_ROWS	8
+#define SKE_KPD_NUM_COLS	8
 
 /* keypad auto scan registers */
 #define SKE_ASR0	0x20
@@ -63,7 +64,7 @@ struct ske_keypad {
 	void __iomem *reg_base;
 	struct input_dev *input;
 	const struct ske_keypad_platform_data *board;
-	unsigned short keymap[SKE_KPD_KEYMAP_SIZE];
+	unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS];
 	struct clk *clk;
 	spinlock_t ske_keypad_lock;
 };
@@ -261,19 +262,18 @@ static int __init ske_keypad_probe(struct platform_device *pdev)
 	input->name = "ux500-ske-keypad";
 	input->dev.parent = &pdev->dev;
 
-	input->keycode = keypad->keymap;
-	input->keycodesize = sizeof(keypad->keymap[0]);
-	input->keycodemax = ARRAY_SIZE(keypad->keymap);
+	error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
+					   SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS,
+					   keypad->keymap, input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to build keymap\n");
+		goto err_iounmap;
+	}
 
 	input_set_capability(input, EV_MSC, MSC_SCAN);
-
-	__set_bit(EV_KEY, input->evbit);
 	if (!plat->no_autorepeat)
 		__set_bit(EV_REP, input->evbit);
 
-	matrix_keypad_build_keymap(plat->keymap_data, SKE_KEYPAD_ROW_SHIFT,
-			input->keycode, input->keybit);
-
 	clk_enable(keypad->clk);
 
 	/* go through board initialization helpers */
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 6b630d9..a0222db 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -61,6 +61,7 @@ struct omap_kp {
 	unsigned int cols;
 	unsigned long delay;
 	unsigned int debounce;
+	unsigned short keymap[];
 };
 
 static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0);
@@ -316,13 +317,6 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	if (!cpu_is_omap24xx())
 		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
-	input_dev->keycode      = &omap_kp[1];
-	input_dev->keycodesize  = sizeof(unsigned short);
-	input_dev->keycodemax   = keycodemax;
-
-	if (pdata->rep)
-		__set_bit(EV_REP, input_dev->evbit);
-
 	if (pdata->delay)
 		omap_kp->delay = pdata->delay;
 
@@ -371,9 +365,6 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 		goto err2;
 
 	/* setup input device */
-	__set_bit(EV_KEY, input_dev->evbit);
-	matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
-			input_dev->keycode, input_dev->keybit);
 	input_dev->name = "omap-keypad";
 	input_dev->phys = "omap-keypad/input0";
 	input_dev->dev.parent = &pdev->dev;
@@ -383,6 +374,15 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	input_dev->id.product = 0x0001;
 	input_dev->id.version = 0x0100;
 
+	if (pdata->rep)
+		__set_bit(EV_REP, input_dev->evbit);
+
+	ret = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
+					 pdata->rows, pdata->cols,
+					 omap_kp->keymap, input_dev);
+	if (ret < 0)
+		goto err3;
+
 	ret = input_register_device(omap_kp->input);
 	if (ret < 0) {
 		printk(KERN_ERR "Unable to register omap-keypad input device\n");
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index e809ac0..aed5f69 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -68,19 +68,52 @@
 
 #define OMAP4_MASK_IRQSTATUSDISABLE	0xFFFF
 
+enum {
+	KBD_REVISION_OMAP4 = 0,
+	KBD_REVISION_OMAP5,
+};
+
 struct omap4_keypad {
 	struct input_dev *input;
 
 	void __iomem *base;
-	int irq;
+	unsigned int irq;
 
 	unsigned int rows;
 	unsigned int cols;
+	u32 reg_offset;
+	u32 irqreg_offset;
 	unsigned int row_shift;
 	unsigned char key_state[8];
 	unsigned short keymap[];
 };
 
+static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
+{
+	return __raw_readl(keypad_data->base +
+				keypad_data->reg_offset + offset);
+}
+
+static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
+{
+	__raw_writel(value,
+		     keypad_data->base + keypad_data->reg_offset + offset);
+}
+
+static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
+{
+	return __raw_readl(keypad_data->base +
+				keypad_data->irqreg_offset + offset);
+}
+
+static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
+			     u32 offset, u32 value)
+{
+	__raw_writel(value,
+		     keypad_data->base + keypad_data->irqreg_offset + offset);
+}
+
+
 /* Interrupt handler */
 static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
 {
@@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
 	u32 *new_state = (u32 *) key_state;
 
 	/* Disable interrupts */
-	__raw_writel(OMAP4_VAL_IRQDISABLE,
-		     keypad_data->base + OMAP4_KBD_IRQENABLE);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+			 OMAP4_VAL_IRQDISABLE);
 
-	*new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
-	*(new_state + 1) = __raw_readl(keypad_data->base
-						+ OMAP4_KBD_FULLCODE63_32);
+	*new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
+	*(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
 
 	for (row = 0; row < keypad_data->rows; row++) {
 		changed = key_state[row] ^ keypad_data->key_state[row];
@@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
 		sizeof(keypad_data->key_state));
 
 	/* clear pending interrupts */
-	__raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
-			keypad_data->base + OMAP4_KBD_IRQSTATUS);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
 
 	/* enable interrupts */
-	__raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
-			keypad_data->base + OMAP4_KBD_IRQENABLE);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+		OMAP4_DEF_IRQENABLE_EVENTEN |
+				OMAP4_DEF_IRQENABLE_LONGKEY);
 
 	return IRQ_HANDLED;
 }
@@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
 
 	disable_irq(keypad_data->irq);
 
-	__raw_writel(OMAP4_VAL_FUNCTIONALCFG,
-			keypad_data->base + OMAP4_KBD_CTRL);
-	__raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
-			keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
-	__raw_writel(OMAP4_VAL_IRQDISABLE,
-			keypad_data->base + OMAP4_KBD_IRQSTATUS);
-	__raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
-			keypad_data->base + OMAP4_KBD_IRQENABLE);
-	__raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
-			keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
+	kbd_writel(keypad_data, OMAP4_KBD_CTRL,
+			OMAP4_VAL_FUNCTIONALCFG);
+	kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
+			OMAP4_VAL_DEBOUNCINGTIME);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+			OMAP4_VAL_IRQDISABLE);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+			OMAP4_DEF_IRQENABLE_EVENTEN |
+				OMAP4_DEF_IRQENABLE_LONGKEY);
+	kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
+			OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
 
 	enable_irq(keypad_data->irq);
 
@@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
 	disable_irq(keypad_data->irq);
 
 	/* Disable interrupts */
-	__raw_writel(OMAP4_VAL_IRQDISABLE,
-		     keypad_data->base + OMAP4_KBD_IRQENABLE);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+			 OMAP4_VAL_IRQDISABLE);
 
 	/* clear pending interrupts */
-	__raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
-			keypad_data->base + OMAP4_KBD_IRQSTATUS);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
 
 	enable_irq(keypad_data->irq);
 
@@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 	struct resource *res;
 	resource_size_t size;
 	unsigned int row_shift, max_keys;
+	int rev;
 	int irq;
 	int error;
 
@@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 	keypad_data->rows = pdata->rows;
 	keypad_data->cols = pdata->cols;
 
+	/*
+	* Enable clocks for the keypad module so that we can read
+	* revision register.
+	*/
+	pm_runtime_enable(&pdev->dev);
+	error = pm_runtime_get_sync(&pdev->dev);
+	if (error) {
+		dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n");
+		goto err_unmap;
+	}
+	rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
+	rev &= 0x03 << 30;
+	rev >>= 30;
+	switch (rev) {
+	case KBD_REVISION_OMAP4:
+		keypad_data->reg_offset = 0x00;
+		keypad_data->irqreg_offset = 0x00;
+		break;
+	case KBD_REVISION_OMAP5:
+		keypad_data->reg_offset = 0x10;
+		keypad_data->irqreg_offset = 0x0c;
+		break;
+	default:
+		dev_err(&pdev->dev,
+			"Keypad reports unsupported revision %d", rev);
+		error = -EINVAL;
+		goto err_pm_put_sync;
+	}
+
 	/* input device allocation */
 	keypad_data->input = input_dev = input_allocate_device();
 	if (!input_dev) {
 		error = -ENOMEM;
-		goto err_unmap;
+		goto err_pm_put_sync;
 	}
 
 	input_dev->name = pdev->name;
@@ -258,20 +322,19 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 	input_dev->open = omap4_keypad_open;
 	input_dev->close = omap4_keypad_close;
 
-	input_dev->keycode	= keypad_data->keymap;
-	input_dev->keycodesize	= sizeof(keypad_data->keymap[0]);
-	input_dev->keycodemax	= max_keys;
+	error = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
+					   pdata->rows, pdata->cols,
+					   keypad_data->keymap, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto err_free_input;
+	}
 
-	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(EV_REP, input_dev->evbit);
-
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
 	input_set_drvdata(input_dev, keypad_data);
 
-	matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
-			input_dev->keycode, input_dev->keybit);
-
 	error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
 			     IRQF_TRIGGER_RISING,
 			     "omap4-keypad", keypad_data);
@@ -280,7 +343,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 		goto err_free_input;
 	}
 
-	pm_runtime_enable(&pdev->dev);
+	pm_runtime_put_sync(&pdev->dev);
 
 	error = input_register_device(keypad_data->input);
 	if (error < 0) {
@@ -296,6 +359,8 @@ err_pm_disable:
 	free_irq(keypad_data->irq, keypad_data);
 err_free_input:
 	input_free_device(input_dev);
+err_pm_put_sync:
+	pm_runtime_put_sync(&pdev->dev);
 err_unmap:
 	iounmap(keypad_data->base);
 err_release_mem:
diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c
index 01a1c9f..52c3465 100644
--- a/drivers/input/keyboard/pmic8xxx-keypad.c
+++ b/drivers/input/keyboard/pmic8xxx-keypad.c
@@ -626,21 +626,21 @@ static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev)
 	kp->input->id.product	= 0x0001;
 	kp->input->id.vendor	= 0x0001;
 
-	kp->input->evbit[0]	= BIT_MASK(EV_KEY);
-
-	if (pdata->rep)
-		__set_bit(EV_REP, kp->input->evbit);
-
-	kp->input->keycode	= kp->keycodes;
-	kp->input->keycodemax	= PM8XXX_MATRIX_MAX_SIZE;
-	kp->input->keycodesize	= sizeof(kp->keycodes);
 	kp->input->open		= pmic8xxx_kp_open;
 	kp->input->close	= pmic8xxx_kp_close;
 
-	matrix_keypad_build_keymap(keymap_data, PM8XXX_ROW_SHIFT,
-					kp->input->keycode, kp->input->keybit);
+	rc = matrix_keypad_build_keymap(keymap_data, NULL,
+					PM8XXX_MAX_ROWS, PM8XXX_MAX_COLS,
+					kp->keycodes, kp->input);
+	if (rc) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto err_get_irq;
+	}
 
+	if (pdata->rep)
+		__set_bit(EV_REP, kp->input->evbit);
 	input_set_capability(kp->input, EV_MSC, MSC_SCAN);
+
 	input_set_drvdata(kp->input, kp);
 
 	/* initialize keypad state */
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index 2391ae8..a061ba6 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -454,23 +454,23 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
 	input_dev->name = pdev->name;
 	input_dev->id.bustype = BUS_HOST;
 	input_dev->dev.parent = &pdev->dev;
-	input_set_drvdata(input_dev, keypad);
 
 	input_dev->open = samsung_keypad_open;
 	input_dev->close = samsung_keypad_close;
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	if (!pdata->no_autorepeat)
-		input_dev->evbit[0] |= BIT_MASK(EV_REP);
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   pdata->rows, pdata->cols,
+					   keypad->keycodes, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto err_put_clk;
+	}
 
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	if (!pdata->no_autorepeat)
+		__set_bit(EV_REP, input_dev->evbit);
 
-	input_dev->keycode = keypad->keycodes;
-	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
-	input_dev->keycodemax = pdata->rows << row_shift;
-
-	matrix_keypad_build_keymap(keymap_data, row_shift,
-			input_dev->keycode, input_dev->keybit);
+	input_set_drvdata(input_dev, keypad);
 
 	keypad->irq = platform_get_irq(pdev, 0);
 	if (keypad->irq < 0) {
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
index 3b6b528..6f287f7 100644
--- a/drivers/input/keyboard/spear-keyboard.c
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -19,6 +19,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_wakeup.h>
 #include <linux/slab.h>
@@ -49,7 +50,9 @@
 #define KEY_VALUE	0x00FFFFFF
 #define ROW_MASK	0xF0
 #define COLUMN_MASK	0x0F
-#define ROW_SHIFT	4
+#define NUM_ROWS	16
+#define NUM_COLS	16
+
 #define KEY_MATRIX_SHIFT	6
 
 struct spear_kbd {
@@ -60,7 +63,8 @@ struct spear_kbd {
 	unsigned int irq;
 	unsigned int mode;
 	unsigned short last_key;
-	unsigned short keycodes[256];
+	unsigned short keycodes[NUM_ROWS * NUM_COLS];
+	bool rep;
 };
 
 static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
@@ -136,27 +140,49 @@ static void spear_kbd_close(struct input_dev *dev)
 	kbd->last_key = KEY_RESERVED;
 }
 
-static int __devinit spear_kbd_probe(struct platform_device *pdev)
+#ifdef CONFIG_OF
+static int __devinit spear_kbd_parse_dt(struct platform_device *pdev,
+                                        struct spear_kbd *kbd)
 {
-	const struct kbd_platform_data *pdata = pdev->dev.platform_data;
-	const struct matrix_keymap_data *keymap;
-	struct spear_kbd *kbd;
-	struct input_dev *input_dev;
-	struct resource *res;
-	int irq;
+	struct device_node *np = pdev->dev.of_node;
 	int error;
+	u32 val;
 
-	if (!pdata) {
-		dev_err(&pdev->dev, "Invalid platform data\n");
+	if (!np) {
+		dev_err(&pdev->dev, "Missing DT data\n");
 		return -EINVAL;
 	}
 
-	keymap = pdata->keymap;
-	if (!keymap) {
-		dev_err(&pdev->dev, "no keymap defined\n");
-		return -EINVAL;
+	if (of_property_read_bool(np, "autorepeat"))
+		kbd->rep = true;
+
+	error = of_property_read_u32(np, "st,mode", &val);
+	if (error) {
+		dev_err(&pdev->dev, "DT: Invalid or missing mode\n");
+		return error;
 	}
 
+	kbd->mode = val;
+	return 0;
+}
+#else
+static inline int spear_kbd_parse_dt(struct platform_device *pdev,
+				     struct spear_kbd *kbd)
+{
+	return -ENOSYS;
+}
+#endif
+
+static int __devinit spear_kbd_probe(struct platform_device *pdev)
+{
+	struct kbd_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	const struct matrix_keymap_data *keymap = pdata ? pdata->keymap : NULL;
+	struct spear_kbd *kbd;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int irq;
+	int error;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "no keyboard resource defined\n");
@@ -179,7 +205,15 @@ static int __devinit spear_kbd_probe(struct platform_device *pdev)
 
 	kbd->input = input_dev;
 	kbd->irq = irq;
-	kbd->mode = pdata->mode;
+
+	if (!pdata) {
+		error = spear_kbd_parse_dt(pdev, kbd);
+		if (error)
+			goto err_free_mem;
+	} else {
+		kbd->mode = pdata->mode;
+		kbd->rep = pdata->rep;
+	}
 
 	kbd->res = request_mem_region(res->start, resource_size(res),
 				      pdev->name);
@@ -212,18 +246,17 @@ static int __devinit spear_kbd_probe(struct platform_device *pdev)
 	input_dev->open = spear_kbd_open;
 	input_dev->close = spear_kbd_close;
 
-	__set_bit(EV_KEY, input_dev->evbit);
-	if (pdata->rep)
+	error = matrix_keypad_build_keymap(keymap, NULL, NUM_ROWS, NUM_COLS,
+					   kbd->keycodes, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to build keymap\n");
+		goto err_put_clk;
+	}
+
+	if (kbd->rep)
 		__set_bit(EV_REP, input_dev->evbit);
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
-	input_dev->keycode = kbd->keycodes;
-	input_dev->keycodesize = sizeof(kbd->keycodes[0]);
-	input_dev->keycodemax = ARRAY_SIZE(kbd->keycodes);
-
-	matrix_keypad_build_keymap(keymap, ROW_SHIFT,
-			input_dev->keycode, input_dev->keybit);
-
 	input_set_drvdata(input_dev, kbd);
 
 	error = request_irq(irq, spear_kbd_interrupt, 0, "keyboard", kbd);
@@ -317,6 +350,14 @@ static int spear_kbd_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(spear_kbd_pm_ops, spear_kbd_suspend, spear_kbd_resume);
 
+#ifdef CONFIG_OF
+static const struct of_device_id spear_kbd_id_table[] = {
+	{ .compatible = "st,spear300-kbd" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spear_kbd_id_table);
+#endif
+
 static struct platform_driver spear_kbd_driver = {
 	.probe		= spear_kbd_probe,
 	.remove		= __devexit_p(spear_kbd_remove),
@@ -324,6 +365,7 @@ static struct platform_driver spear_kbd_driver = {
 		.name	= "keyboard",
 		.owner	= THIS_MODULE,
 		.pm	= &spear_kbd_pm_ops,
+		.of_match_table = of_match_ptr(spear_kbd_id_table),
 	},
 };
 module_platform_driver(spear_kbd_driver);
diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
index 9397cf9..470a877 100644
--- a/drivers/input/keyboard/stmpe-keypad.c
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -289,19 +289,17 @@ static int __devinit stmpe_keypad_probe(struct platform_device *pdev)
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &pdev->dev;
 
-	input_set_capability(input, EV_MSC, MSC_SCAN);
+	ret = matrix_keypad_build_keymap(plat->keymap_data, NULL,
+					 STMPE_KEYPAD_MAX_ROWS,
+					 STMPE_KEYPAD_MAX_COLS,
+					 keypad->keymap, input);
+	if (ret)
+		goto out_freeinput;
 
-	__set_bit(EV_KEY, input->evbit);
+	input_set_capability(input, EV_MSC, MSC_SCAN);
 	if (!plat->no_autorepeat)
 		__set_bit(EV_REP, input->evbit);
 
-	input->keycode = keypad->keymap;
-	input->keycodesize = sizeof(keypad->keymap[0]);
-	input->keycodemax = ARRAY_SIZE(keypad->keymap);
-
-	matrix_keypad_build_keymap(plat->keymap_data, STMPE_KEYPAD_ROW_SHIFT,
-				   input->keycode, input->keybit);
-
 	for (i = 0; i < plat->keymap_data->keymap_size; i++) {
 		unsigned int key = plat->keymap_data->keymap[i];
 
diff --git a/drivers/input/keyboard/stowaway.c b/drivers/input/keyboard/stowaway.c
index 7437219..cc612c5 100644
--- a/drivers/input/keyboard/stowaway.c
+++ b/drivers/input/keyboard/stowaway.c
@@ -170,15 +170,4 @@ static struct serio_driver skbd_drv = {
 	.disconnect	= skbd_disconnect,
 };
 
-static int __init skbd_init(void)
-{
-	return serio_register_driver(&skbd_drv);
-}
-
-static void __exit skbd_exit(void)
-{
-	serio_unregister_driver(&skbd_drv);
-}
-
-module_init(skbd_init);
-module_exit(skbd_exit);
+module_serio_driver(skbd_drv);
diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c
index a99a04b..5f836b1 100644
--- a/drivers/input/keyboard/sunkbd.c
+++ b/drivers/input/keyboard/sunkbd.c
@@ -369,19 +369,4 @@ static struct serio_driver sunkbd_drv = {
 	.disconnect	= sunkbd_disconnect,
 };
 
-/*
- * The functions for insering/removing us as a module.
- */
-
-static int __init sunkbd_init(void)
-{
-	return serio_register_driver(&sunkbd_drv);
-}
-
-static void __exit sunkbd_exit(void)
-{
-	serio_unregister_driver(&sunkbd_drv);
-}
-
-module_init(sunkbd_init);
-module_exit(sunkbd_exit);
+module_serio_driver(sunkbd_drv);
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
index 2dee3e4..7d498e6 100644
--- a/drivers/input/keyboard/tc3589x-keypad.c
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -78,7 +78,7 @@
  * @input:      pointer to input device object
  * @board:      keypad platform device
  * @krow:	number of rows
- * @kcol:	number of coloumns
+ * @kcol:	number of columns
  * @keymap:     matrix scan code table for keycodes
  * @keypad_stopped: holds keypad status
  */
@@ -96,21 +96,15 @@ static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
 {
 	int ret;
 	struct tc3589x *tc3589x = keypad->tc3589x;
-	u8 settle_time = keypad->board->settle_time;
-	u8 dbounce_period = keypad->board->debounce_period;
-	u8 rows = keypad->board->krow & 0xf;	/* mask out the nibble */
-	u8 column = keypad->board->kcol & 0xf;	/* mask out the nibble */
-
-	/* validate platform configurations */
-	if (keypad->board->kcol > TC3589x_MAX_KPCOL ||
-	    keypad->board->krow > TC3589x_MAX_KPROW ||
-	    keypad->board->debounce_period > TC3589x_MAX_DEBOUNCE_SETTLE ||
-	    keypad->board->settle_time > TC3589x_MAX_DEBOUNCE_SETTLE)
+	const struct tc3589x_keypad_platform_data *board = keypad->board;
+
+	/* validate platform configuration */
+	if (board->kcol > TC3589x_MAX_KPCOL || board->krow > TC3589x_MAX_KPROW)
 		return -EINVAL;
 
 	/* configure KBDSIZE 4 LSbits for cols and 4 MSbits for rows */
 	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSIZE,
-			(rows << KP_ROW_SHIFT) | column);
+			(board->krow << KP_ROW_SHIFT) | board->kcol);
 	if (ret < 0)
 		return ret;
 
@@ -124,12 +118,14 @@ static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
 		return ret;
 
 	/* Configure settle time */
-	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG, settle_time);
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG,
+				board->settle_time);
 	if (ret < 0)
 		return ret;
 
 	/* Configure debounce time */
-	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE, dbounce_period);
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE,
+				board->debounce_period);
 	if (ret < 0)
 		return ret;
 
@@ -337,23 +333,22 @@ static int __devinit tc3589x_keypad_probe(struct platform_device *pdev)
 	input->name = pdev->name;
 	input->dev.parent = &pdev->dev;
 
-	input->keycode = keypad->keymap;
-	input->keycodesize = sizeof(keypad->keymap[0]);
-	input->keycodemax = ARRAY_SIZE(keypad->keymap);
-
 	input->open = tc3589x_keypad_open;
 	input->close = tc3589x_keypad_close;
 
-	input_set_drvdata(input, keypad);
+	error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
+					   TC3589x_MAX_KPROW, TC3589x_MAX_KPCOL,
+					   keypad->keymap, input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to build keymap\n");
+		goto err_free_mem;
+	}
 
 	input_set_capability(input, EV_MSC, MSC_SCAN);
-
-	__set_bit(EV_KEY, input->evbit);
 	if (!plat->no_autorepeat)
 		__set_bit(EV_REP, input->evbit);
 
-	matrix_keypad_build_keymap(plat->keymap_data, 0x3,
-			input->keycode, input->keybit);
+	input_set_drvdata(input, keypad);
 
 	error = request_threaded_irq(irq, NULL,
 			tc3589x_keypad_irq, plat->irqtype,
diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
index 958ec10..5f87b28 100644
--- a/drivers/input/keyboard/tca8418_keypad.c
+++ b/drivers/input/keyboard/tca8418_keypad.c
@@ -342,21 +342,20 @@ static int __devinit tca8418_keypad_probe(struct i2c_client *client,
 	input->id.product = 0x001;
 	input->id.version = 0x0001;
 
-	input->keycode     = keypad_data->keymap;
-	input->keycodesize = sizeof(keypad_data->keymap[0]);
-	input->keycodemax  = max_keys;
+	error = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
+					   pdata->rows, pdata->cols,
+					   keypad_data->keymap, input);
+	if (error) {
+		dev_dbg(&client->dev, "Failed to build keymap\n");
+		goto fail2;
+	}
 
-	__set_bit(EV_KEY, input->evbit);
 	if (pdata->rep)
 		__set_bit(EV_REP, input->evbit);
-
 	input_set_capability(input, EV_MSC, MSC_SCAN);
 
 	input_set_drvdata(input, keypad_data);
 
-	matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
-			input->keycode, input->keybit);
-
 	if (pdata->irq_is_gpio)
 		client->irq = gpio_to_irq(client->irq);
 
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index fe4ac95..4ffe64d 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -619,8 +619,8 @@ tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata,
 }
 
 #ifdef CONFIG_OF
-static struct tegra_kbc_platform_data * __devinit
-tegra_kbc_dt_parse_pdata(struct platform_device *pdev)
+static struct tegra_kbc_platform_data * __devinit tegra_kbc_dt_parse_pdata(
+	struct platform_device *pdev)
 {
 	struct tegra_kbc_platform_data *pdata;
 	struct device_node *np = pdev->dev.of_node;
@@ -660,10 +660,6 @@ tegra_kbc_dt_parse_pdata(struct platform_device *pdev)
 		pdata->pin_cfg[KBC_MAX_ROW + i].type = PIN_CFG_COL;
 	}
 
-	pdata->keymap_data = matrix_keyboard_of_fill_keymap(np, "linux,keymap");
-
-	/* FIXME: Add handling of linux,fn-keymap here */
-
 	return pdata;
 }
 #else
@@ -674,10 +670,36 @@ static inline struct tegra_kbc_platform_data *tegra_kbc_dt_parse_pdata(
 }
 #endif
 
+static int __devinit tegra_kbd_setup_keymap(struct tegra_kbc *kbc)
+{
+	const struct tegra_kbc_platform_data *pdata = kbc->pdata;
+	const struct matrix_keymap_data *keymap_data = pdata->keymap_data;
+	unsigned int keymap_rows = KBC_MAX_KEY;
+	int retval;
+
+	if (keymap_data && pdata->use_fn_map)
+		keymap_rows *= 2;
+
+	retval = matrix_keypad_build_keymap(keymap_data, NULL,
+					    keymap_rows, KBC_MAX_COL,
+					    kbc->keycode, kbc->idev);
+	if (retval == -ENOSYS || retval == -ENOENT) {
+		/*
+		 * If there is no OF support in kernel or keymap
+		 * property is missing, use default keymap.
+		 */
+		retval = matrix_keypad_build_keymap(
+					&tegra_kbc_default_keymap_data, NULL,
+					keymap_rows, KBC_MAX_COL,
+					kbc->keycode, kbc->idev);
+	}
+
+	return retval;
+}
+
 static int __devinit tegra_kbc_probe(struct platform_device *pdev)
 {
 	const struct tegra_kbc_platform_data *pdata = pdev->dev.platform_data;
-	const struct matrix_keymap_data *keymap_data;
 	struct tegra_kbc *kbc;
 	struct input_dev *input_dev;
 	struct resource *res;
@@ -757,29 +779,26 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev)
 	kbc->repoll_dly = KBC_ROW_SCAN_DLY + scan_time_rows + pdata->repeat_cnt;
 	kbc->repoll_dly = DIV_ROUND_UP(kbc->repoll_dly, KBC_CYCLE_MS);
 
+	kbc->wakeup_key = pdata->wakeup_key;
+	kbc->use_fn_map = pdata->use_fn_map;
+	kbc->use_ghost_filter = pdata->use_ghost_filter;
+
 	input_dev->name = pdev->name;
 	input_dev->id.bustype = BUS_HOST;
 	input_dev->dev.parent = &pdev->dev;
 	input_dev->open = tegra_kbc_open;
 	input_dev->close = tegra_kbc_close;
 
-	input_set_drvdata(input_dev, kbc);
+	err = tegra_kbd_setup_keymap(kbc);
+	if (err) {
+		dev_err(&pdev->dev, "failed to setup keymap\n");
+		goto err_put_clk;
+	}
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	__set_bit(EV_REP, input_dev->evbit);
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
-	input_dev->keycode = kbc->keycode;
-	input_dev->keycodesize = sizeof(kbc->keycode[0]);
-	input_dev->keycodemax = KBC_MAX_KEY;
-	if (pdata->use_fn_map)
-		input_dev->keycodemax *= 2;
-
-	kbc->use_fn_map = pdata->use_fn_map;
-	kbc->use_ghost_filter = pdata->use_ghost_filter;
-	keymap_data = pdata->keymap_data ?: &tegra_kbc_default_keymap_data;
-	matrix_keypad_build_keymap(keymap_data, KBC_ROW_SHIFT,
-				   input_dev->keycode, input_dev->keybit);
-	kbc->wakeup_key = pdata->wakeup_key;
+	input_set_drvdata(input_dev, kbc);
 
 	err = request_irq(kbc->irq, tegra_kbc_isr,
 			  IRQF_NO_SUSPEND | IRQF_TRIGGER_HIGH, pdev->name, kbc);
@@ -799,9 +818,6 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, kbc);
 	device_init_wakeup(&pdev->dev, pdata->wakeup);
 
-	if (!pdev->dev.platform_data)
-		matrix_keyboard_of_free_keymap(pdata->keymap_data);
-
 	return 0;
 
 err_free_irq:
@@ -816,10 +832,8 @@ err_free_mem:
 	input_free_device(input_dev);
 	kfree(kbc);
 err_free_pdata:
-	if (!pdev->dev.platform_data) {
-		matrix_keyboard_of_free_keymap(pdata->keymap_data);
+	if (!pdev->dev.platform_data)
 		kfree(pdata);
-	}
 
 	return err;
 }
diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c
index fb39c94..a4a445f 100644
--- a/drivers/input/keyboard/tnetv107x-keypad.c
+++ b/drivers/input/keyboard/tnetv107x-keypad.c
@@ -247,15 +247,11 @@ static int __devinit keypad_probe(struct platform_device *pdev)
 		error = -ENOMEM;
 		goto error_input;
 	}
-	input_set_drvdata(kp->input_dev, kp);
 
 	kp->input_dev->name	  = pdev->name;
 	kp->input_dev->dev.parent = &pdev->dev;
 	kp->input_dev->open	  = keypad_start;
 	kp->input_dev->close	  = keypad_stop;
-	kp->input_dev->evbit[0]	  = BIT_MASK(EV_KEY);
-	if (!pdata->no_autorepeat)
-		kp->input_dev->evbit[0] |= BIT_MASK(EV_REP);
 
 	clk_enable(kp->clk);
 	rev = keypad_read(kp, rev);
@@ -264,15 +260,20 @@ static int __devinit keypad_probe(struct platform_device *pdev)
 	kp->input_dev->id.version = ((rev >> 16) & 0xfff);
 	clk_disable(kp->clk);
 
-	kp->input_dev->keycode     = kp->keycodes;
-	kp->input_dev->keycodesize = sizeof(kp->keycodes[0]);
-	kp->input_dev->keycodemax  = kp->rows << kp->row_shift;
-
-	matrix_keypad_build_keymap(keymap_data, kp->row_shift, kp->keycodes,
-				   kp->input_dev->keybit);
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   kp->rows, kp->cols,
+					   kp->keycodes, kp->input_dev);
+	if (error) {
+		dev_err(dev, "Failed to build keymap\n");
+		goto error_reg;
+	}
 
+	if (!pdata->no_autorepeat)
+		kp->input_dev->evbit[0] |= BIT_MASK(EV_REP);
 	input_set_capability(kp->input_dev, EV_MSC, MSC_SCAN);
 
+	input_set_drvdata(kp->input_dev, kp);
+
 	error = input_register_device(kp->input_dev);
 	if (error < 0) {
 		dev_err(dev, "Could not register input device\n");
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index 67bec14..a2c6f79 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -361,14 +361,6 @@ static int __devinit twl4030_kp_probe(struct platform_device *pdev)
 	kp->irq = platform_get_irq(pdev, 0);
 
 	/* setup input device */
-	__set_bit(EV_KEY, input->evbit);
-
-	/* Enable auto repeat feature of Linux input subsystem */
-	if (pdata->rep)
-		__set_bit(EV_REP, input->evbit);
-
-	input_set_capability(input, EV_MSC, MSC_SCAN);
-
 	input->name		= "TWL4030 Keypad";
 	input->phys		= "twl4030_keypad/input0";
 	input->dev.parent	= &pdev->dev;
@@ -378,12 +370,19 @@ static int __devinit twl4030_kp_probe(struct platform_device *pdev)
 	input->id.product	= 0x0001;
 	input->id.version	= 0x0003;
 
-	input->keycode		= kp->keymap;
-	input->keycodesize	= sizeof(kp->keymap[0]);
-	input->keycodemax	= ARRAY_SIZE(kp->keymap);
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   TWL4030_MAX_ROWS,
+					   1 << TWL4030_ROW_SHIFT,
+					   kp->keymap, input);
+	if (error) {
+		dev_err(kp->dbg_dev, "Failed to build keymap\n");
+		goto err1;
+	}
 
-	matrix_keypad_build_keymap(keymap_data, TWL4030_ROW_SHIFT,
-				   input->keycode, input->keybit);
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+	/* Enable auto repeat feature of Linux input subsystem */
+	if (pdata->rep)
+		__set_bit(EV_REP, input->evbit);
 
 	error = input_register_device(input);
 	if (error) {
diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c
index 99bbb7e..085ede4 100644
--- a/drivers/input/keyboard/w90p910_keypad.c
+++ b/drivers/input/keyboard/w90p910_keypad.c
@@ -42,7 +42,8 @@
 #define KGET_RAW(n)		(((n) & KEY0R) >> 3)
 #define KGET_COLUMN(n)		((n) & KEY0C)
 
-#define W90P910_MAX_KEY_NUM	(8 * 8)
+#define W90P910_NUM_ROWS	8
+#define W90P910_NUM_COLS	8
 #define W90P910_ROW_SHIFT	3
 
 struct w90p910_keypad {
@@ -51,7 +52,7 @@ struct w90p910_keypad {
 	struct input_dev *input_dev;
 	void __iomem *mmio_base;
 	int irq;
-	unsigned short keymap[W90P910_MAX_KEY_NUM];
+	unsigned short keymap[W90P910_NUM_ROWS * W90P910_NUM_COLS];
 };
 
 static void w90p910_keypad_scan_matrix(struct w90p910_keypad *keypad,
@@ -190,17 +191,13 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev)
 	input_dev->close = w90p910_keypad_close;
 	input_dev->dev.parent = &pdev->dev;
 
-	input_dev->keycode = keypad->keymap;
-	input_dev->keycodesize = sizeof(keypad->keymap[0]);
-	input_dev->keycodemax = ARRAY_SIZE(keypad->keymap);
-
-	input_set_drvdata(input_dev, keypad);
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
-	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
-
-	matrix_keypad_build_keymap(keymap_data, W90P910_ROW_SHIFT,
-				   input_dev->keycode, input_dev->keybit);
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   W90P910_NUM_ROWS, W90P910_NUM_COLS,
+					   keypad->keymap, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto failed_put_clk;
+	}
 
 	error = request_irq(keypad->irq, w90p910_keypad_irq_handler,
 			    0, pdev->name, keypad);
@@ -209,6 +206,10 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev)
 		goto failed_put_clk;
 	}
 
+	__set_bit(EV_REP, input_dev->evbit);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, keypad);
+
 	/* Register the input device */
 	error = input_register_device(input_dev);
 	if (error) {
diff --git a/drivers/input/keyboard/xtkbd.c b/drivers/input/keyboard/xtkbd.c
index 37b01d7..d050d9d 100644
--- a/drivers/input/keyboard/xtkbd.c
+++ b/drivers/input/keyboard/xtkbd.c
@@ -169,15 +169,4 @@ static struct serio_driver xtkbd_drv = {
 	.disconnect	= xtkbd_disconnect,
 };
 
-static int __init xtkbd_init(void)
-{
-	return serio_register_driver(&xtkbd_drv);
-}
-
-static void __exit xtkbd_exit(void)
-{
-	serio_unregister_driver(&xtkbd_drv);
-}
-
-module_init(xtkbd_init);
-module_exit(xtkbd_exit);
+module_serio_driver(xtkbd_drv);
diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c
new file mode 100644
index 0000000..443ad64b
--- /dev/null
+++ b/drivers/input/matrix-keymap.c
@@ -0,0 +1,163 @@
+/*
+ * Helpers for matrix keyboard bindings
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * Author:
+ *	Olof Johansson <olof@lixom.net>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/of.h>
+#include <linux/export.h>
+#include <linux/input/matrix_keypad.h>
+
+static bool matrix_keypad_map_key(struct input_dev *input_dev,
+				  unsigned int rows, unsigned int cols,
+				  unsigned int row_shift, unsigned int key)
+{
+	unsigned short *keymap = input_dev->keycode;
+	unsigned int row = KEY_ROW(key);
+	unsigned int col = KEY_COL(key);
+	unsigned short code = KEY_VAL(key);
+
+	if (row >= rows || col >= cols) {
+		dev_err(input_dev->dev.parent,
+			"%s: invalid keymap entry 0x%x (row: %d, col: %d, rows: %d, cols: %d)\n",
+			__func__, key, row, col, rows, cols);
+		return false;
+	}
+
+	keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
+	__set_bit(code, input_dev->keybit);
+
+	return true;
+}
+
+#ifdef CONFIG_OF
+static int matrix_keypad_parse_of_keymap(const char *propname,
+					 unsigned int rows, unsigned int cols,
+					 struct input_dev *input_dev)
+{
+	struct device *dev = input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+	unsigned int row_shift = get_count_order(cols);
+	unsigned int max_keys = rows << row_shift;
+	unsigned int proplen, i, size;
+	const __be32 *prop;
+
+	if (!np)
+		return -ENOENT;
+
+	if (!propname)
+		propname = "linux,keymap";
+
+	prop = of_get_property(np, propname, &proplen);
+	if (!prop) {
+		dev_err(dev, "OF: %s property not defined in %s\n",
+			propname, np->full_name);
+		return -ENOENT;
+	}
+
+	if (proplen % sizeof(u32)) {
+		dev_err(dev, "OF: Malformed keycode property %s in %s\n",
+			propname, np->full_name);
+		return -EINVAL;
+	}
+
+	size = proplen / sizeof(u32);
+	if (size > max_keys) {
+		dev_err(dev, "OF: %s size overflow\n", propname);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < size; i++) {
+		unsigned int key = be32_to_cpup(prop + i);
+
+		if (!matrix_keypad_map_key(input_dev, rows, cols,
+					   row_shift, key))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+#else
+static int matrix_keypad_parse_of_keymap(const char *propname,
+					 unsigned int rows, unsigned int cols,
+					 struct input_dev *input_dev)
+{
+	return -ENOSYS;
+}
+#endif
+
+/**
+ * matrix_keypad_build_keymap - convert platform keymap into matrix keymap
+ * @keymap_data: keymap supplied by the platform code
+ * @keymap_name: name of device tree property containing keymap (if device
+ *	tree support is enabled).
+ * @rows: number of rows in target keymap array
+ * @cols: number of cols in target keymap array
+ * @keymap: expanded version of keymap that is suitable for use by
+ * matrix keyboard driver
+ * @input_dev: input devices for which we are setting up the keymap
+ *
+ * This function converts platform keymap (encoded with KEY() macro) into
+ * an array of keycodes that is suitable for using in a standard matrix
+ * keyboard driver that uses row and col as indices.
+ *
+ * If @keymap_data is not supplied and device tree support is enabled
+ * it will attempt load the keymap from property specified by @keymap_name
+ * argument (or "linux,keymap" if @keymap_name is %NULL).
+ *
+ * Callers are expected to set up input_dev->dev.parent before calling this
+ * function.
+ */
+int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
+			       const char *keymap_name,
+			       unsigned int rows, unsigned int cols,
+			       unsigned short *keymap,
+			       struct input_dev *input_dev)
+{
+	unsigned int row_shift = get_count_order(cols);
+	int i;
+	int error;
+
+	input_dev->keycode = keymap;
+	input_dev->keycodesize = sizeof(*keymap);
+	input_dev->keycodemax = rows << row_shift;
+
+	__set_bit(EV_KEY, input_dev->evbit);
+
+	if (keymap_data) {
+		for (i = 0; i < keymap_data->keymap_size; i++) {
+			unsigned int key = keymap_data->keymap[i];
+
+			if (!matrix_keypad_map_key(input_dev, rows, cols,
+						   row_shift, key))
+				return -EINVAL;
+		}
+	} else {
+		error = matrix_keypad_parse_of_keymap(keymap_name, rows, cols,
+						      input_dev);
+		if (error)
+			return error;
+	}
+
+	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	return 0;
+}
+EXPORT_SYMBOL(matrix_keypad_build_keymap);
diff --git a/drivers/input/misc/88pm860x_onkey.c b/drivers/input/misc/88pm860x_onkey.c
index f2e0cbc..f9ce183 100644
--- a/drivers/input/misc/88pm860x_onkey.c
+++ b/drivers/input/misc/88pm860x_onkey.c
@@ -105,6 +105,8 @@ static int __devinit pm860x_onkey_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, info);
+	device_init_wakeup(&pdev->dev, 1);
+
 	return 0;
 
 out_irq:
@@ -129,10 +131,34 @@ static int __devexit pm860x_onkey_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int pm860x_onkey_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag |= 1 << PM8607_IRQ_ONKEY;
+	return 0;
+}
+static int pm860x_onkey_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag &= ~(1 << PM8607_IRQ_ONKEY);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm860x_onkey_pm_ops, pm860x_onkey_suspend, pm860x_onkey_resume);
+
 static struct platform_driver pm860x_onkey_driver = {
 	.driver		= {
 		.name	= "88pm860x-onkey",
 		.owner	= THIS_MODULE,
+		.pm	= &pm860x_onkey_pm_ops,
 	},
 	.probe		= pm860x_onkey_probe,
 	.remove		= __devexit_p(pm860x_onkey_remove),
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index d628272..7faf4a7 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -380,8 +380,7 @@ config INPUT_TWL4030_VIBRA
 
 config INPUT_TWL6040_VIBRA
 	tristate "Support for TWL6040 Vibrator"
-	depends on TWL4030_CORE
-	select TWL6040_CORE
+	depends on TWL6040_CORE
 	select INPUT_FF_MEMLESS
 	help
 	  This option enables support for TWL6040 Vibrator Driver.
@@ -580,7 +579,7 @@ config INPUT_CMA3000_I2C
 
 config INPUT_XEN_KBDDEV_FRONTEND
 	tristate "Xen virtual keyboard and mouse support"
-	depends on XEN_FBDEV_FRONTEND
+	depends on XEN
 	default y
 	select XEN_XENBUS_FRONTEND
 	help
diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
index 06517e6..a3735a0 100644
--- a/drivers/input/misc/cma3000_d0x.c
+++ b/drivers/input/misc/cma3000_d0x.c
@@ -318,7 +318,7 @@ struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
 	mutex_init(&data->mutex);
 
 	data->mode = pdata->mode;
-	if (data->mode < CMAMODE_DEFAULT || data->mode > CMAMODE_POFF) {
+	if (data->mode > CMAMODE_POFF) {
 		data->mode = CMAMODE_MOTDET;
 		dev_warn(dev,
 			 "Invalid mode specified, assuming Motion Detect\n");
diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c
index 5403c57..306f84c 100644
--- a/drivers/input/misc/mpu3050.c
+++ b/drivers/input/misc/mpu3050.c
@@ -367,7 +367,7 @@ static int __devinit mpu3050_probe(struct i2c_client *client,
 
 	error = request_threaded_irq(client->irq,
 				     NULL, mpu3050_interrupt_thread,
-				     IRQF_TRIGGER_RISING,
+				     IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 				     "mpu3050", sensor);
 	if (error) {
 		dev_err(&client->dev,
diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index 45874fe..c34f6c0 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -27,8 +27,9 @@
  */
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 #include <linux/workqueue.h>
-#include <linux/i2c/twl.h>
+#include <linux/input.h>
 #include <linux/mfd/twl6040.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -257,11 +258,14 @@ static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
 
 static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 {
-	struct twl4030_vibra_data *pdata = pdev->dev.platform_data;
+	struct twl6040_vibra_data *pdata = pdev->dev.platform_data;
+	struct device_node *node = pdev->dev.of_node;
 	struct vibra_info *info;
+	int vddvibl_uV = 0;
+	int vddvibr_uV = 0;
 	int ret;
 
-	if (!pdata) {
+	if (!pdata && !node) {
 		dev_err(&pdev->dev, "platform_data not available\n");
 		return -EINVAL;
 	}
@@ -273,11 +277,26 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 	}
 
 	info->dev = &pdev->dev;
+
 	info->twl6040 = dev_get_drvdata(pdev->dev.parent);
-	info->vibldrv_res = pdata->vibldrv_res;
-	info->vibrdrv_res = pdata->vibrdrv_res;
-	info->viblmotor_res = pdata->viblmotor_res;
-	info->vibrmotor_res = pdata->vibrmotor_res;
+	if (pdata) {
+		info->vibldrv_res = pdata->vibldrv_res;
+		info->vibrdrv_res = pdata->vibrdrv_res;
+		info->viblmotor_res = pdata->viblmotor_res;
+		info->vibrmotor_res = pdata->vibrmotor_res;
+		vddvibl_uV = pdata->vddvibl_uV;
+		vddvibr_uV = pdata->vddvibr_uV;
+	} else {
+		of_property_read_u32(node, "vibldrv_res", &info->vibldrv_res);
+		of_property_read_u32(node, "vibrdrv_res", &info->vibrdrv_res);
+		of_property_read_u32(node, "viblmotor_res",
+				     &info->viblmotor_res);
+		of_property_read_u32(node, "vibrmotor_res",
+				     &info->vibrmotor_res);
+		of_property_read_u32(node, "vddvibl_uV", &vddvibl_uV);
+		of_property_read_u32(node, "vddvibr_uV", &vddvibr_uV);
+	}
+
 	if ((!info->vibldrv_res && !info->viblmotor_res) ||
 	    (!info->vibrdrv_res && !info->vibrmotor_res)) {
 		dev_err(info->dev, "invalid vibra driver/motor resistance\n");
@@ -339,10 +358,9 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 		goto err_regulator;
 	}
 
-	if (pdata->vddvibl_uV) {
+	if (vddvibl_uV) {
 		ret = regulator_set_voltage(info->supplies[0].consumer,
-					    pdata->vddvibl_uV,
-					    pdata->vddvibl_uV);
+					    vddvibl_uV, vddvibl_uV);
 		if (ret) {
 			dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
 				ret);
@@ -350,10 +368,9 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (pdata->vddvibr_uV) {
+	if (vddvibr_uV) {
 		ret = regulator_set_voltage(info->supplies[1].consumer,
-					    pdata->vddvibr_uV,
-					    pdata->vddvibr_uV);
+					    vddvibr_uV, vddvibr_uV);
 		if (ret) {
 			dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
 				ret);
@@ -401,6 +418,12 @@ static int __devexit twl6040_vibra_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id twl6040_vibra_of_match[] = {
+	{.compatible = "ti,twl6040-vibra", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl6040_vibra_of_match);
+
 static struct platform_driver twl6040_vibra_driver = {
 	.probe		= twl6040_vibra_probe,
 	.remove		= __devexit_p(twl6040_vibra_remove),
@@ -408,6 +431,7 @@ static struct platform_driver twl6040_vibra_driver = {
 		.name	= "twl6040-vibra",
 		.owner	= THIS_MODULE,
 		.pm	= &twl6040_vibra_pm_ops,
+		.of_match_table = twl6040_vibra_of_match,
 	},
 };
 module_platform_driver(twl6040_vibra_driver);
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 9b8db82..cd6268c 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -339,4 +339,16 @@ config MOUSE_SYNAPTICS_USB
 	  To compile this driver as a module, choose M here: the
 	  module will be called synaptics_usb.
 
+config MOUSE_NAVPOINT_PXA27x
+	tristate "Synaptics NavPoint (PXA27x SSP/SPI)"
+	depends on PXA27x && PXA_SSP
+	help
+	  This driver adds support for the Synaptics NavPoint touchpad connected
+	  to a PXA27x SSP port in SPI slave mode. The device emulates a mouse;
+	  a tap or tap-and-a-half drag gesture emulates the left mouse button.
+	  For example, use the xf86-input-evdev driver for an X pointing device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called navpoint.
+
 endif
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 4718eff..46ba755 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MOUSE_GPIO)		+= gpio_mouse.o
 obj-$(CONFIG_MOUSE_INPORT)		+= inport.o
 obj-$(CONFIG_MOUSE_LOGIBM)		+= logibm.o
 obj-$(CONFIG_MOUSE_MAPLE)		+= maplemouse.o
+obj-$(CONFIG_MOUSE_NAVPOINT_PXA27x)	+= navpoint.o
 obj-$(CONFIG_MOUSE_PC110PAD)		+= pc110pad.o
 obj-$(CONFIG_MOUSE_PS2)			+= psmouse.o
 obj-$(CONFIG_MOUSE_PXA930_TRKBALL)	+= pxa930_trkball.o
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 4c6a72d..4a1347e 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -553,10 +553,7 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
 
 	alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
 
-	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
-	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
-	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
-	input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
+	input_mt_report_finger_count(dev, fingers);
 
 	input_report_key(dev, BTN_LEFT, left);
 	input_report_key(dev, BTN_RIGHT, right);
@@ -604,10 +601,54 @@ static void alps_process_packet_v3(struct psmouse *psmouse)
 
 static void alps_process_packet_v4(struct psmouse *psmouse)
 {
+	struct alps_data *priv = psmouse->private;
 	unsigned char *packet = psmouse->packet;
 	struct input_dev *dev = psmouse->dev;
+	int offset;
 	int x, y, z;
 	int left, right;
+	int x1, y1, x2, y2;
+	int fingers = 0;
+	unsigned int x_bitmap, y_bitmap;
+
+	/*
+	 * v4 has a 6-byte encoding for bitmap data, but this data is
+	 * broken up between 3 normal packets. Use priv->multi_packet to
+	 * track our position in the bitmap packet.
+	 */
+	if (packet[6] & 0x40) {
+		/* sync, reset position */
+		priv->multi_packet = 0;
+	}
+
+	if (WARN_ON_ONCE(priv->multi_packet > 2))
+		return;
+
+	offset = 2 * priv->multi_packet;
+	priv->multi_data[offset] = packet[6];
+	priv->multi_data[offset + 1] = packet[7];
+
+	if (++priv->multi_packet > 2) {
+		priv->multi_packet = 0;
+
+		x_bitmap = ((priv->multi_data[2] & 0x1f) << 10) |
+			   ((priv->multi_data[3] & 0x60) << 3) |
+			   ((priv->multi_data[0] & 0x3f) << 2) |
+			   ((priv->multi_data[1] & 0x60) >> 5);
+		y_bitmap = ((priv->multi_data[5] & 0x01) << 10) |
+			   ((priv->multi_data[3] & 0x1f) << 5) |
+			    (priv->multi_data[1] & 0x1f);
+
+		fingers = alps_process_bitmap(x_bitmap, y_bitmap,
+					      &x1, &y1, &x2, &y2);
+
+		/* Store MT data.*/
+		priv->fingers = fingers;
+		priv->x1 = x1;
+		priv->x2 = x2;
+		priv->y1 = y1;
+		priv->y2 = y2;
+	}
 
 	left = packet[4] & 0x01;
 	right = packet[4] & 0x02;
@@ -617,21 +658,41 @@ static void alps_process_packet_v4(struct psmouse *psmouse)
 	y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
 	z = packet[5] & 0x7f;
 
+	/*
+	 * If there were no contacts in the bitmap, use ST
+	 * points in MT reports.
+	 * If there were two contacts or more, report MT data.
+	 */
+	if (priv->fingers < 2) {
+		x1 = x;
+		y1 = y;
+		fingers = z > 0 ? 1 : 0;
+	} else {
+		fingers = priv->fingers;
+		x1 = priv->x1;
+		x2 = priv->x2;
+		y1 = priv->y1;
+		y2 = priv->y2;
+	}
+
 	if (z >= 64)
 		input_report_key(dev, BTN_TOUCH, 1);
 	else
 		input_report_key(dev, BTN_TOUCH, 0);
 
+	alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
+
+	input_mt_report_finger_count(dev, fingers);
+
+	input_report_key(dev, BTN_LEFT, left);
+	input_report_key(dev, BTN_RIGHT, right);
+
 	if (z > 0) {
 		input_report_abs(dev, ABS_X, x);
 		input_report_abs(dev, ABS_Y, y);
 	}
 	input_report_abs(dev, ABS_PRESSURE, z);
 
-	input_report_key(dev, BTN_TOOL_FINGER, z > 0);
-	input_report_key(dev, BTN_LEFT, left);
-	input_report_key(dev, BTN_RIGHT, right);
-
 	input_sync(dev);
 }
 
@@ -1557,6 +1618,7 @@ int alps_init(struct psmouse *psmouse)
 		input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
 		break;
 	case ALPS_PROTO_V3:
+	case ALPS_PROTO_V4:
 		set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
 		input_mt_init_slots(dev1, 2);
 		input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0);
@@ -1565,8 +1627,7 @@ int alps_init(struct psmouse *psmouse)
 		set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
 		set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
 		set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
-		/* fall through */
-	case ALPS_PROTO_V4:
+
 		input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0);
 		input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0);
 		break;
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index a00a4ab9..ae1ac35 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -39,6 +39,8 @@ struct alps_data {
 	int prev_fin;			/* Finger bit from previous packet */
 	int multi_packet;		/* Multi-packet data in progress */
 	unsigned char multi_data[6];	/* Saved multi-packet data */
+	int x1, x2, y1, y2;		/* Coordinates from last MT report */
+	int fingers;			/* Number of fingers from MT report */
 	u8 quirks;
 	struct timer_list timer;
 };
diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c
index ff5f61a..5fa9934 100644
--- a/drivers/input/mouse/amimouse.c
+++ b/drivers/input/mouse/amimouse.c
@@ -25,7 +25,6 @@
 
 #include <asm/irq.h>
 #include <asm/setup.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
diff --git a/drivers/input/mouse/atarimouse.c b/drivers/input/mouse/atarimouse.c
index 5c4a692..d1c4323 100644
--- a/drivers/input/mouse/atarimouse.c
+++ b/drivers/input/mouse/atarimouse.c
@@ -47,7 +47,6 @@
 
 #include <asm/irq.h>
 #include <asm/setup.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/atarihw.h>
 #include <asm/atarikb.h>
diff --git a/drivers/input/mouse/navpoint.c b/drivers/input/mouse/navpoint.c
new file mode 100644
index 0000000..c29ae76
--- /dev/null
+++ b/drivers/input/mouse/navpoint.c
@@ -0,0 +1,369 @@
+/*
+ * Synaptics NavPoint (PXA27x SSP/SPI) driver.
+ *
+ * Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/navpoint.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/pxa2xx_ssp.h>
+#include <linux/slab.h>
+
+/*
+ * Synaptics Modular Embedded Protocol: Module Packet Format.
+ * Module header byte 2:0 = Length (# bytes that follow)
+ * Module header byte 4:3 = Control
+ * Module header byte 7:5 = Module Address
+ */
+#define HEADER_LENGTH(byte)	((byte) & 0x07)
+#define HEADER_CONTROL(byte)	(((byte) >> 3) & 0x03)
+#define HEADER_ADDRESS(byte)	((byte) >> 5)
+
+struct navpoint {
+	struct ssp_device	*ssp;
+	struct input_dev	*input;
+	struct device		*dev;
+	int			gpio;
+	int			index;
+	u8			data[1 + HEADER_LENGTH(0xff)];
+};
+
+/*
+ * Initialization values for SSCR0_x, SSCR1_x, SSSR_x.
+ */
+static const u32 sscr0 = 0
+	| SSCR0_TUM		/* TIM = 1; No TUR interrupts */
+	| SSCR0_RIM		/* RIM = 1; No ROR interrupts */
+	| SSCR0_SSE		/* SSE = 1; SSP enabled */
+	| SSCR0_Motorola	/* FRF = 0; Motorola SPI */
+	| SSCR0_DataSize(16)	/* DSS = 15; Data size = 16-bit */
+	;
+static const u32 sscr1 = 0
+	| SSCR1_SCFR		/* SCFR = 1; SSPSCLK only during transfers */
+	| SSCR1_SCLKDIR		/* SCLKDIR = 1; Slave mode */
+	| SSCR1_SFRMDIR		/* SFRMDIR = 1; Slave mode */
+	| SSCR1_RWOT		/* RWOT = 1; Receive without transmit mode */
+	| SSCR1_RxTresh(1)	/* RFT = 0; Receive FIFO threshold = 1 */
+	| SSCR1_SPH		/* SPH = 1; SSPSCLK inactive 0.5 + 1 cycles */
+	| SSCR1_RIE		/* RIE = 1; Receive FIFO interrupt enabled */
+	;
+static const u32 sssr = 0
+	| SSSR_BCE		/* BCE = 1; Clear BCE */
+	| SSSR_TUR		/* TUR = 1; Clear TUR */
+	| SSSR_EOC		/* EOC = 1; Clear EOC */
+	| SSSR_TINT		/* TINT = 1; Clear TINT */
+	| SSSR_PINT		/* PINT = 1; Clear PINT */
+	| SSSR_ROR		/* ROR = 1; Clear ROR */
+	;
+
+/*
+ * MEP Query $22: Touchpad Coordinate Range Query is not supported by
+ * the NavPoint module, so sampled values provide the default limits.
+ */
+#define NAVPOINT_X_MIN		1278
+#define NAVPOINT_X_MAX		5340
+#define NAVPOINT_Y_MIN		1572
+#define NAVPOINT_Y_MAX		4396
+#define NAVPOINT_PRESSURE_MIN	0
+#define NAVPOINT_PRESSURE_MAX	255
+
+static void navpoint_packet(struct navpoint *navpoint)
+{
+	int finger;
+	int gesture;
+	int x, y, z;
+
+	switch (navpoint->data[0]) {
+	case 0xff:	/* Garbage (packet?) between reset and Hello packet */
+	case 0x00:	/* Module 0, NULL packet */
+		break;
+
+	case 0x0e:	/* Module 0, Absolute packet */
+		finger = (navpoint->data[1] & 0x01);
+		gesture = (navpoint->data[1] & 0x02);
+		x = ((navpoint->data[2] & 0x1f) << 8) | navpoint->data[3];
+		y = ((navpoint->data[4] & 0x1f) << 8) | navpoint->data[5];
+		z = navpoint->data[6];
+		input_report_key(navpoint->input, BTN_TOUCH, finger);
+		input_report_abs(navpoint->input, ABS_X, x);
+		input_report_abs(navpoint->input, ABS_Y, y);
+		input_report_abs(navpoint->input, ABS_PRESSURE, z);
+		input_report_key(navpoint->input, BTN_TOOL_FINGER, finger);
+		input_report_key(navpoint->input, BTN_LEFT, gesture);
+		input_sync(navpoint->input);
+		break;
+
+	case 0x19:	/* Module 0, Hello packet */
+		if ((navpoint->data[1] & 0xf0) == 0x10)
+			break;
+		/* FALLTHROUGH */
+	default:
+		dev_warn(navpoint->dev,
+			 "spurious packet: data=0x%02x,0x%02x,...\n",
+			 navpoint->data[0], navpoint->data[1]);
+		break;
+	}
+}
+
+static irqreturn_t navpoint_irq(int irq, void *dev_id)
+{
+	struct navpoint *navpoint = dev_id;
+	struct ssp_device *ssp = navpoint->ssp;
+	irqreturn_t ret = IRQ_NONE;
+	u32 status;
+
+	status = pxa_ssp_read_reg(ssp, SSSR);
+	if (status & sssr) {
+		dev_warn(navpoint->dev,
+			 "unexpected interrupt: status=0x%08x\n", status);
+		pxa_ssp_write_reg(ssp, SSSR, (status & sssr));
+		ret = IRQ_HANDLED;
+	}
+
+	while (status & SSSR_RNE) {
+		u32 data;
+
+		data = pxa_ssp_read_reg(ssp, SSDR);
+		navpoint->data[navpoint->index + 0] = (data >> 8);
+		navpoint->data[navpoint->index + 1] = data;
+		navpoint->index += 2;
+		if (HEADER_LENGTH(navpoint->data[0]) < navpoint->index) {
+			navpoint_packet(navpoint);
+			navpoint->index = 0;
+		}
+		status = pxa_ssp_read_reg(ssp, SSSR);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static void navpoint_up(struct navpoint *navpoint)
+{
+	struct ssp_device *ssp = navpoint->ssp;
+	int timeout;
+
+	clk_prepare_enable(ssp->clk);
+
+	pxa_ssp_write_reg(ssp, SSCR1, sscr1);
+	pxa_ssp_write_reg(ssp, SSSR, sssr);
+	pxa_ssp_write_reg(ssp, SSTO, 0);
+	pxa_ssp_write_reg(ssp, SSCR0, sscr0);	/* SSCR0_SSE written last */
+
+	/* Wait until SSP port is ready for slave clock operations */
+	for (timeout = 100; timeout != 0; --timeout) {
+		if (!(pxa_ssp_read_reg(ssp, SSSR) & SSSR_CSS))
+			break;
+		msleep(1);
+	}
+
+	if (timeout == 0)
+		dev_err(navpoint->dev,
+			"timeout waiting for SSSR[CSS] to clear\n");
+
+	if (gpio_is_valid(navpoint->gpio))
+		gpio_set_value(navpoint->gpio, 1);
+}
+
+static void navpoint_down(struct navpoint *navpoint)
+{
+	struct ssp_device *ssp = navpoint->ssp;
+
+	if (gpio_is_valid(navpoint->gpio))
+		gpio_set_value(navpoint->gpio, 0);
+
+	pxa_ssp_write_reg(ssp, SSCR0, 0);
+
+	clk_disable_unprepare(ssp->clk);
+}
+
+static int navpoint_open(struct input_dev *input)
+{
+	struct navpoint *navpoint = input_get_drvdata(input);
+
+	navpoint_up(navpoint);
+
+	return 0;
+}
+
+static void navpoint_close(struct input_dev *input)
+{
+	struct navpoint *navpoint = input_get_drvdata(input);
+
+	navpoint_down(navpoint);
+}
+
+static int __devinit navpoint_probe(struct platform_device *pdev)
+{
+	const struct navpoint_platform_data *pdata =
+					dev_get_platdata(&pdev->dev);
+	struct ssp_device *ssp;
+	struct input_dev *input;
+	struct navpoint *navpoint;
+	int error;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	if (gpio_is_valid(pdata->gpio)) {
+		error = gpio_request_one(pdata->gpio, GPIOF_OUT_INIT_LOW,
+					 "SYNAPTICS_ON");
+		if (error)
+			return error;
+	}
+
+	ssp = pxa_ssp_request(pdata->port, pdev->name);
+	if (!ssp) {
+		error = -ENODEV;
+		goto err_free_gpio;
+	}
+
+	/* HaRET does not disable devices before jumping into Linux */
+	if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) {
+		pxa_ssp_write_reg(ssp, SSCR0, 0);
+		dev_warn(&pdev->dev, "ssp%d already enabled\n", pdata->port);
+	}
+
+	navpoint = kzalloc(sizeof(*navpoint), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!navpoint || !input) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	navpoint->ssp = ssp;
+	navpoint->input = input;
+	navpoint->dev = &pdev->dev;
+	navpoint->gpio = pdata->gpio;
+
+	input->name = pdev->name;
+	input->dev.parent = &pdev->dev;
+
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(EV_ABS, input->evbit);
+	__set_bit(BTN_LEFT, input->keybit);
+	__set_bit(BTN_TOUCH, input->keybit);
+	__set_bit(BTN_TOOL_FINGER, input->keybit);
+
+	input_set_abs_params(input, ABS_X,
+			     NAVPOINT_X_MIN, NAVPOINT_X_MAX, 0, 0);
+	input_set_abs_params(input, ABS_Y,
+			     NAVPOINT_Y_MIN, NAVPOINT_Y_MAX, 0, 0);
+	input_set_abs_params(input, ABS_PRESSURE,
+			     NAVPOINT_PRESSURE_MIN, NAVPOINT_PRESSURE_MAX,
+			     0, 0);
+
+	input->open = navpoint_open;
+	input->close = navpoint_close;
+
+	input_set_drvdata(input, navpoint);
+
+	error = request_irq(ssp->irq, navpoint_irq, 0, pdev->name, navpoint);
+	if (error)
+		goto err_free_mem;
+
+	error = input_register_device(input);
+	if (error)
+		goto err_free_irq;
+
+	platform_set_drvdata(pdev, navpoint);
+	dev_dbg(&pdev->dev, "ssp%d, irq %d\n", pdata->port, ssp->irq);
+
+	return 0;
+
+err_free_irq:
+	free_irq(ssp->irq, &pdev->dev);
+err_free_mem:
+	input_free_device(input);
+	kfree(navpoint);
+	pxa_ssp_free(ssp);
+err_free_gpio:
+	if (gpio_is_valid(pdata->gpio))
+		gpio_free(pdata->gpio);
+
+	return error;
+}
+
+static int __devexit navpoint_remove(struct platform_device *pdev)
+{
+	const struct navpoint_platform_data *pdata =
+					dev_get_platdata(&pdev->dev);
+	struct navpoint *navpoint = platform_get_drvdata(pdev);
+	struct ssp_device *ssp = navpoint->ssp;
+
+	free_irq(ssp->irq, navpoint);
+
+	input_unregister_device(navpoint->input);
+	kfree(navpoint);
+
+	pxa_ssp_free(ssp);
+
+	if (gpio_is_valid(pdata->gpio))
+		gpio_free(pdata->gpio);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int navpoint_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct navpoint *navpoint = platform_get_drvdata(pdev);
+	struct input_dev *input = navpoint->input;
+
+	mutex_lock(&input->mutex);
+	if (input->users)
+		navpoint_down(navpoint);
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+
+static int navpoint_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct navpoint *navpoint = platform_get_drvdata(pdev);
+	struct input_dev *input = navpoint->input;
+
+	mutex_lock(&input->mutex);
+	if (input->users)
+		navpoint_up(navpoint);
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(navpoint_pm_ops, navpoint_suspend, navpoint_resume);
+
+static struct platform_driver navpoint_driver = {
+	.probe		= navpoint_probe,
+	.remove		= __devexit_p(navpoint_remove),
+	.driver = {
+		.name	= "navpoint",
+		.owner	= THIS_MODULE,
+		.pm	= &navpoint_pm_ops,
+	},
+};
+
+module_platform_driver(navpoint_driver);
+
+MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
+MODULE_DESCRIPTION("Synaptics NavPoint (PXA27x SSP/SPI) driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:navpoint");
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index 661a0ca..3f5649f 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -41,7 +41,7 @@
 #define	GET_ABS_Y(packet)	((packet[2] << 2) | (packet[3] & 0x03))
 
 /** Driver version. */
-static const char fsp_drv_ver[] = "1.0.0-K";
+static const char fsp_drv_ver[] = "1.1.0-K";
 
 /*
  * Make sure that the value being sent to FSP will not conflict with
@@ -303,6 +303,27 @@ static int fsp_get_revision(struct psmouse *psmouse, int *rev)
 	return 0;
 }
 
+static int fsp_get_sn(struct psmouse *psmouse, int *sn)
+{
+	int v0, v1, v2;
+	int rc = -EIO;
+
+	/* production number since Cx is available at: 0x0b40 ~ 0x0b42 */
+	if (fsp_page_reg_write(psmouse, FSP_PAGE_0B))
+		goto out;
+	if (fsp_reg_read(psmouse, FSP_REG_SN0, &v0))
+		goto out;
+	if (fsp_reg_read(psmouse, FSP_REG_SN1, &v1))
+		goto out;
+	if (fsp_reg_read(psmouse, FSP_REG_SN2, &v2))
+		goto out;
+	*sn = (v0 << 16) | (v1 << 8) | v2;
+	rc = 0;
+out:
+	fsp_page_reg_write(psmouse, FSP_PAGE_DEFAULT);
+	return rc;
+}
+
 static int fsp_get_buttons(struct psmouse *psmouse, int *btn)
 {
 	static const int buttons[] = {
@@ -1000,16 +1021,21 @@ static int fsp_reconnect(struct psmouse *psmouse)
 int fsp_init(struct psmouse *psmouse)
 {
 	struct fsp_data *priv;
-	int ver, rev;
+	int ver, rev, sn = 0;
 	int error;
 
 	if (fsp_get_version(psmouse, &ver) ||
 	    fsp_get_revision(psmouse, &rev)) {
 		return -ENODEV;
 	}
+	if (ver >= FSP_VER_STL3888_C0) {
+		/* firmware information is only available since C0 */
+		fsp_get_sn(psmouse, &sn);
+	}
 
-	psmouse_info(psmouse, "Finger Sensing Pad, hw: %d.%d.%d, sw: %s\n",
-		     ver >> 4, ver & 0x0F, rev, fsp_drv_ver);
+	psmouse_info(psmouse,
+		     "Finger Sensing Pad, hw: %d.%d.%d, sn: %x, sw: %s\n",
+		     ver >> 4, ver & 0x0F, rev, sn, fsp_drv_ver);
 
 	psmouse->private = priv = kzalloc(sizeof(struct fsp_data), GFP_KERNEL);
 	if (!priv)
diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h
index 334de19..aa697ec 100644
--- a/drivers/input/mouse/sentelic.h
+++ b/drivers/input/mouse/sentelic.h
@@ -65,6 +65,14 @@
 #define	FSP_BIT_SWC1_GST_GRP1	BIT(6)
 #define	FSP_BIT_SWC1_BX_COMPAT	BIT(7)
 
+#define	FSP_PAGE_0B		(0x0b)
+#define	FSP_PAGE_82		(0x82)
+#define	FSP_PAGE_DEFAULT	FSP_PAGE_82
+
+#define	FSP_REG_SN0		(0x40)
+#define	FSP_REG_SN1		(0x41)
+#define	FSP_REG_SN2		(0x42)
+
 /* Finger-sensing Pad packet formating related definitions */
 
 /* absolute packet type */
diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c
index 17ff137b..d5928fd 100644
--- a/drivers/input/mouse/sermouse.c
+++ b/drivers/input/mouse/sermouse.c
@@ -355,15 +355,4 @@ static struct serio_driver sermouse_drv = {
 	.disconnect	= sermouse_disconnect,
 };
 
-static int __init sermouse_init(void)
-{
-	return serio_register_driver(&sermouse_drv);
-}
-
-static void __exit sermouse_exit(void)
-{
-	serio_unregister_driver(&sermouse_drv);
-}
-
-module_init(sermouse_init);
-module_exit(sermouse_exit);
+module_serio_driver(sermouse_drv);
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index a4b14a4..c703d53 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -45,16 +45,6 @@
 #define YMIN_NOMINAL 1408
 #define YMAX_NOMINAL 4448
 
-/*
- * Synaptics touchpads report the y coordinate from bottom to top, which is
- * opposite from what userspace expects.
- * This function is used to invert y before reporting.
- */
-static int synaptics_invert_y(int y)
-{
-	return YMAX_NOMINAL + YMIN_NOMINAL - y;
-}
-
 
 /*****************************************************************************
  *	Stuff we need even when we do not want native Synaptics support
@@ -112,6 +102,16 @@ void synaptics_reset(struct psmouse *psmouse)
  ****************************************************************************/
 
 /*
+ * Synaptics touchpads report the y coordinate from bottom to top, which is
+ * opposite from what userspace expects.
+ * This function is used to invert y before reporting.
+ */
+static int synaptics_invert_y(int y)
+{
+	return YMAX_NOMINAL + YMIN_NOMINAL - y;
+}
+
+/*
  * Send a command to the synpatics touchpad by special commands
  */
 static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, unsigned char *param)
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index eb9a3cf..e900d46 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -548,16 +548,4 @@ static struct serio_driver vsxxxaa_drv = {
 	.disconnect	= vsxxxaa_disconnect,
 };
 
-static int __init vsxxxaa_init(void)
-{
-	return serio_register_driver(&vsxxxaa_drv);
-}
-
-static void __exit vsxxxaa_exit(void)
-{
-	serio_unregister_driver(&vsxxxaa_drv);
-}
-
-module_init(vsxxxaa_init);
-module_exit(vsxxxaa_exit);
-
+module_serio_driver(vsxxxaa_drv);
diff --git a/drivers/input/of_keymap.c b/drivers/input/of_keymap.c
deleted file mode 100644
index 061493d..0000000
--- a/drivers/input/of_keymap.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Helpers for open firmware matrix keyboard bindings
- *
- * Copyright (C) 2012 Google, Inc
- *
- * Author:
- *	Olof Johansson <olof@lixom.net>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/input.h>
-#include <linux/of.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/export.h>
-#include <linux/gfp.h>
-#include <linux/slab.h>
-
-struct matrix_keymap_data *
-matrix_keyboard_of_fill_keymap(struct device_node *np,
-			       const char *propname)
-{
-	struct matrix_keymap_data *kd;
-	u32 *keymap;
-	int proplen, i;
-	const __be32 *prop;
-
-	if (!np)
-		return NULL;
-
-	if (!propname)
-		propname = "linux,keymap";
-
-	prop = of_get_property(np, propname, &proplen);
-	if (!prop)
-		return NULL;
-
-	if (proplen % sizeof(u32)) {
-		pr_warn("Malformed keymap property %s in %s\n",
-			propname, np->full_name);
-		return NULL;
-	}
-
-	kd = kzalloc(sizeof(*kd), GFP_KERNEL);
-	if (!kd)
-		return NULL;
-
-	kd->keymap = keymap = kzalloc(proplen, GFP_KERNEL);
-	if (!kd->keymap) {
-		kfree(kd);
-		return NULL;
-	}
-
-	kd->keymap_size = proplen / sizeof(u32);
-
-	for (i = 0; i < kd->keymap_size; i++) {
-		u32 tmp = be32_to_cpup(prop + i);
-		int key_code, row, col;
-
-		row = (tmp >> 24) & 0xff;
-		col = (tmp >> 16) & 0xff;
-		key_code = tmp & 0xffff;
-		keymap[i] = KEY(row, col, key_code);
-	}
-
-	return kd;
-}
-EXPORT_SYMBOL_GPL(matrix_keyboard_of_fill_keymap);
-
-void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd)
-{
-	if (kd) {
-		kfree(kd->keymap);
-		kfree(kd);
-	}
-}
-EXPORT_SYMBOL_GPL(matrix_keyboard_of_free_keymap);
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index 8407d5b..2ffd110 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -208,18 +208,7 @@ static struct amba_driver ambakmi_driver = {
 	.resume		= amba_kmi_resume,
 };
 
-static int __init amba_kmi_init(void)
-{
-	return amba_driver_register(&ambakmi_driver);
-}
-
-static void __exit amba_kmi_exit(void)
-{
-	amba_driver_unregister(&ambakmi_driver);
-}
-
-module_init(amba_kmi_init);
-module_exit(amba_kmi_exit);
+module_amba_driver(ambakmi_driver);
 
 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
 MODULE_DESCRIPTION("AMBA KMI controller driver");
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index d4d08bd..f5fbdf9 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -92,8 +92,7 @@ static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id)
 static int ams_delta_serio_open(struct serio *serio)
 {
 	/* enable keyboard */
-	ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR,
-			AMD_DELTA_LATCH2_KEYBRD_PWR);
+	gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 1);
 
 	return 0;
 }
@@ -101,9 +100,32 @@ static int ams_delta_serio_open(struct serio *serio)
 static void ams_delta_serio_close(struct serio *serio)
 {
 	/* disable keyboard */
-	ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR, 0);
+	gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0);
 }
 
+static const struct gpio ams_delta_gpios[] __initconst_or_module = {
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_DATA,
+		.flags	= GPIOF_DIR_IN,
+		.label	= "serio-data",
+	},
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_CLK,
+		.flags	= GPIOF_DIR_IN,
+		.label	= "serio-clock",
+	},
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_PWR,
+		.flags	= GPIOF_OUT_INIT_LOW,
+		.label	= "serio-power",
+	},
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT,
+		.flags	= GPIOF_OUT_INIT_LOW,
+		.label	= "serio-dataout",
+	},
+};
+
 static int __init ams_delta_serio_init(void)
 {
 	int err;
@@ -123,19 +145,12 @@ static int __init ams_delta_serio_init(void)
 	strlcpy(ams_delta_serio->phys, "GPIO/serio0",
 			sizeof(ams_delta_serio->phys));
 
-	err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_DATA, "serio-data");
+	err = gpio_request_array(ams_delta_gpios,
+				ARRAY_SIZE(ams_delta_gpios));
 	if (err) {
-		pr_err("ams_delta_serio: Couldn't request gpio pin for data\n");
+		pr_err("ams_delta_serio: Couldn't request gpio pins\n");
 		goto serio;
 	}
-	gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
-
-	err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_CLK, "serio-clock");
-	if (err) {
-		pr_err("ams_delta_serio: couldn't request gpio pin for clock\n");
-		goto gpio_data;
-	}
-	gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
 
 	err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
 			ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING,
@@ -143,7 +158,7 @@ static int __init ams_delta_serio_init(void)
 	if (err < 0) {
 		pr_err("ams_delta_serio: couldn't request gpio interrupt %d\n",
 				gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
-		goto gpio_clk;
+		goto gpio;
 	}
 	/*
 	 * Since GPIO register handling for keyboard clock pin is performed
@@ -157,10 +172,9 @@ static int __init ams_delta_serio_init(void)
 	dev_info(&ams_delta_serio->dev, "%s\n", ams_delta_serio->name);
 
 	return 0;
-gpio_clk:
-	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
-gpio_data:
-	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
+gpio:
+	gpio_free_array(ams_delta_gpios,
+			ARRAY_SIZE(ams_delta_gpios));
 serio:
 	kfree(ams_delta_serio);
 	return err;
@@ -170,8 +184,8 @@ module_init(ams_delta_serio_init);
 static void __exit ams_delta_serio_exit(void)
 {
 	serio_unregister_port(ams_delta_serio);
-	free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
-	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
-	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
+	free_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
+	gpio_free_array(ams_delta_gpios,
+			ARRAY_SIZE(ams_delta_gpios));
 }
 module_exit(ams_delta_serio_exit);
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index be33160..09a0899 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -71,7 +71,6 @@
 #include <linux/slab.h>
 #include <linux/hil.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 /* Machine-specific abstraction */
 
diff --git a/drivers/input/serio/maceps2.c b/drivers/input/serio/maceps2.c
index 558200e..61da763 100644
--- a/drivers/input/serio/maceps2.c
+++ b/drivers/input/serio/maceps2.c
@@ -21,7 +21,6 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/ip32/mace.h>
 #include <asm/ip32/ip32_ints.h>
 
diff --git a/drivers/input/serio/pcips2.c b/drivers/input/serio/pcips2.c
index 4349474..0c42497 100644
--- a/drivers/input/serio/pcips2.c
+++ b/drivers/input/serio/pcips2.c
@@ -206,6 +206,7 @@ static const struct pci_device_id pcips2_ids[] = {
 	},
 	{ 0, }
 };
+MODULE_DEVICE_TABLE(pci, pcips2_ids);
 
 static struct pci_driver pcips2_driver = {
 	.name			= "pcips2",
@@ -214,20 +215,8 @@ static struct pci_driver pcips2_driver = {
 	.remove			= __devexit_p(pcips2_remove),
 };
 
-static int __init pcips2_init(void)
-{
-	return pci_register_driver(&pcips2_driver);
-}
-
-static void __exit pcips2_exit(void)
-{
-	pci_unregister_driver(&pcips2_driver);
-}
-
-module_init(pcips2_init);
-module_exit(pcips2_exit);
+module_pci_driver(pcips2_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
 MODULE_DESCRIPTION("PCI PS/2 keyboard/mouse driver");
-MODULE_DEVICE_TABLE(pci, pcips2_ids);
diff --git a/drivers/input/serio/ps2mult.c b/drivers/input/serio/ps2mult.c
index 15aa81c..a76fb64 100644
--- a/drivers/input/serio/ps2mult.c
+++ b/drivers/input/serio/ps2mult.c
@@ -304,15 +304,4 @@ static struct serio_driver ps2mult_drv = {
 	.reconnect	= ps2mult_reconnect,
 };
 
-static int __init ps2mult_init(void)
-{
-	return serio_register_driver(&ps2mult_drv);
-}
-
-static void __exit ps2mult_exit(void)
-{
-	serio_unregister_driver(&ps2mult_drv);
-}
-
-module_init(ps2mult_init);
-module_exit(ps2mult_exit);
+module_serio_driver(ps2mult_drv);
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 8b44ddc..2af5df6 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -36,16 +36,19 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 
-#include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
-#include <asm/system.h>
 
 MODULE_AUTHOR("Vojtech Pavlik, Russell King");
 MODULE_DESCRIPTION("Acorn RiscPC PS/2 keyboard controller driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:kart");
 
+struct rpckbd_data {
+	int tx_irq;
+	int rx_irq;
+};
+
 static int rpckbd_write(struct serio *port, unsigned char val)
 {
 	while (!(iomd_readb(IOMD_KCTRL) & (1 << 7)))
@@ -78,19 +81,21 @@ static irqreturn_t rpckbd_tx(int irq, void *dev_id)
 
 static int rpckbd_open(struct serio *port)
 {
+	struct rpckbd_data *rpckbd = port->port_data;
+
 	/* Reset the keyboard state machine. */
 	iomd_writeb(0, IOMD_KCTRL);
 	iomd_writeb(8, IOMD_KCTRL);
 	iomd_readb(IOMD_KARTRX);
 
-	if (request_irq(IRQ_KEYBOARDRX, rpckbd_rx, 0, "rpckbd", port) != 0) {
+	if (request_irq(rpckbd->rx_irq, rpckbd_rx, 0, "rpckbd", port) != 0) {
 		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard receive IRQ\n");
 		return -EBUSY;
 	}
 
-	if (request_irq(IRQ_KEYBOARDTX, rpckbd_tx, 0, "rpckbd", port) != 0) {
+	if (request_irq(rpckbd->tx_irq, rpckbd_tx, 0, "rpckbd", port) != 0) {
 		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ\n");
-		free_irq(IRQ_KEYBOARDRX, port);
+		free_irq(rpckbd->rx_irq, port);
 		return -EBUSY;
 	}
 
@@ -99,8 +104,10 @@ static int rpckbd_open(struct serio *port)
 
 static void rpckbd_close(struct serio *port)
 {
-	free_irq(IRQ_KEYBOARDRX, port);
-	free_irq(IRQ_KEYBOARDTX, port);
+	struct rpckbd_data *rpckbd = port->port_data;
+
+	free_irq(rpckbd->rx_irq, port);
+	free_irq(rpckbd->tx_irq, port);
 }
 
 /*
@@ -109,17 +116,35 @@ static void rpckbd_close(struct serio *port)
  */
 static int __devinit rpckbd_probe(struct platform_device *dev)
 {
+	struct rpckbd_data *rpckbd;
 	struct serio *serio;
+	int tx_irq, rx_irq;
+
+	rx_irq = platform_get_irq(dev, 0);
+	if (rx_irq <= 0)
+		return rx_irq < 0 ? rx_irq : -ENXIO;
+
+	tx_irq = platform_get_irq(dev, 1);
+	if (tx_irq <= 0)
+		return tx_irq < 0 ? tx_irq : -ENXIO;
 
 	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
-	if (!serio)
+	rpckbd = kzalloc(sizeof(*rpckbd), GFP_KERNEL);
+	if (!serio || !rpckbd) {
+		kfree(rpckbd);
+		kfree(serio);
 		return -ENOMEM;
+	}
+
+	rpckbd->rx_irq = rx_irq;
+	rpckbd->tx_irq = tx_irq;
 
 	serio->id.type		= SERIO_8042;
 	serio->write		= rpckbd_write;
 	serio->open		= rpckbd_open;
 	serio->close		= rpckbd_close;
 	serio->dev.parent	= &dev->dev;
+	serio->port_data	= rpckbd;
 	strlcpy(serio->name, "RiscPC PS/2 kbd port", sizeof(serio->name));
 	strlcpy(serio->phys, "rpckbd/serio0", sizeof(serio->phys));
 
@@ -131,7 +156,11 @@ static int __devinit rpckbd_probe(struct platform_device *dev)
 static int __devexit rpckbd_remove(struct platform_device *dev)
 {
 	struct serio *serio = platform_get_drvdata(dev);
+	struct rpckbd_data *rpckbd = serio->port_data;
+
 	serio_unregister_port(serio);
+	kfree(rpckbd);
+
 	return 0;
 }
 
diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c
index 44fc8b4..3897667 100644
--- a/drivers/input/serio/sa1111ps2.c
+++ b/drivers/input/serio/sa1111ps2.c
@@ -20,10 +20,29 @@
 #include <linux/spinlock.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <asm/hardware/sa1111.h>
 
+#define PS2CR		0x0000
+#define PS2STAT		0x0004
+#define PS2DATA		0x0008
+#define PS2CLKDIV	0x000c
+#define PS2PRECNT	0x0010
+
+#define PS2CR_ENA	0x08
+#define PS2CR_FKD	0x02
+#define PS2CR_FKC	0x01
+
+#define PS2STAT_STP	0x0100
+#define PS2STAT_TXE	0x0080
+#define PS2STAT_TXB	0x0040
+#define PS2STAT_RXF	0x0020
+#define PS2STAT_RXB	0x0010
+#define PS2STAT_ENA	0x0008
+#define PS2STAT_RXP	0x0004
+#define PS2STAT_KBD	0x0002
+#define PS2STAT_KBC	0x0001
+
 struct ps2if {
 	struct serio		*io;
 	struct sa1111_dev	*dev;
@@ -45,22 +64,22 @@ static irqreturn_t ps2_rxint(int irq, void *dev_id)
 	struct ps2if *ps2if = dev_id;
 	unsigned int scancode, flag, status;
 
-	status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+	status = sa1111_readl(ps2if->base + PS2STAT);
 	while (status & PS2STAT_RXF) {
 		if (status & PS2STAT_STP)
-			sa1111_writel(PS2STAT_STP, ps2if->base + SA1111_PS2STAT);
+			sa1111_writel(PS2STAT_STP, ps2if->base + PS2STAT);
 
 		flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) |
 		       (status & PS2STAT_RXP ? 0 : SERIO_PARITY);
 
-		scancode = sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff;
+		scancode = sa1111_readl(ps2if->base + PS2DATA) & 0xff;
 
 		if (hweight8(scancode) & 1)
 			flag ^= SERIO_PARITY;
 
 		serio_interrupt(ps2if->io, scancode, flag);
 
-		status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+		status = sa1111_readl(ps2if->base + PS2STAT);
         }
 
         return IRQ_HANDLED;
@@ -75,12 +94,12 @@ static irqreturn_t ps2_txint(int irq, void *dev_id)
 	unsigned int status;
 
 	spin_lock(&ps2if->lock);
-	status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+	status = sa1111_readl(ps2if->base + PS2STAT);
 	if (ps2if->head == ps2if->tail) {
 		disable_irq_nosync(irq);
 		/* done */
 	} else if (status & PS2STAT_TXE) {
-		sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA);
+		sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + PS2DATA);
 		ps2if->tail = (ps2if->tail + 1) & (sizeof(ps2if->buf) - 1);
 	}
 	spin_unlock(&ps2if->lock);
@@ -103,8 +122,8 @@ static int ps2_write(struct serio *io, unsigned char val)
 	/*
 	 * If the TX register is empty, we can go straight out.
 	 */
-	if (sa1111_readl(ps2if->base + SA1111_PS2STAT) & PS2STAT_TXE) {
-		sa1111_writel(val, ps2if->base + SA1111_PS2DATA);
+	if (sa1111_readl(ps2if->base + PS2STAT) & PS2STAT_TXE) {
+		sa1111_writel(val, ps2if->base + PS2DATA);
 	} else {
 		if (ps2if->head == ps2if->tail)
 			enable_irq(ps2if->dev->irq[1]);
@@ -124,13 +143,16 @@ static int ps2_open(struct serio *io)
 	struct ps2if *ps2if = io->port_data;
 	int ret;
 
-	sa1111_enable_device(ps2if->dev);
+	ret = sa1111_enable_device(ps2if->dev);
+	if (ret)
+		return ret;
 
 	ret = request_irq(ps2if->dev->irq[0], ps2_rxint, 0,
 			  SA1111_DRIVER_NAME(ps2if->dev), ps2if);
 	if (ret) {
 		printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
 			ps2if->dev->irq[0], ret);
+		sa1111_disable_device(ps2if->dev);
 		return ret;
 	}
 
@@ -140,6 +162,7 @@ static int ps2_open(struct serio *io)
 		printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
 			ps2if->dev->irq[1], ret);
 		free_irq(ps2if->dev->irq[0], ps2if);
+		sa1111_disable_device(ps2if->dev);
 		return ret;
 	}
 
@@ -147,7 +170,7 @@ static int ps2_open(struct serio *io)
 
 	enable_irq_wake(ps2if->dev->irq[0]);
 
-	sa1111_writel(PS2CR_ENA, ps2if->base + SA1111_PS2CR);
+	sa1111_writel(PS2CR_ENA, ps2if->base + PS2CR);
 	return 0;
 }
 
@@ -155,7 +178,7 @@ static void ps2_close(struct serio *io)
 {
 	struct ps2if *ps2if = io->port_data;
 
-	sa1111_writel(0, ps2if->base + SA1111_PS2CR);
+	sa1111_writel(0, ps2if->base + PS2CR);
 
 	disable_irq_wake(ps2if->dev->irq[0]);
 
@@ -175,7 +198,7 @@ static void __devinit ps2_clear_input(struct ps2if *ps2if)
 	int maxread = 100;
 
 	while (maxread--) {
-		if ((sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff) == 0xff)
+		if ((sa1111_readl(ps2if->base + PS2DATA) & 0xff) == 0xff)
 			break;
 	}
 }
@@ -185,11 +208,11 @@ static unsigned int __devinit ps2_test_one(struct ps2if *ps2if,
 {
 	unsigned int val;
 
-	sa1111_writel(PS2CR_ENA | mask, ps2if->base + SA1111_PS2CR);
+	sa1111_writel(PS2CR_ENA | mask, ps2if->base + PS2CR);
 
 	udelay(2);
 
-	val = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+	val = sa1111_readl(ps2if->base + PS2STAT);
 	return val & (PS2STAT_KBC | PS2STAT_KBD);
 }
 
@@ -220,7 +243,7 @@ static int __devinit ps2_test(struct ps2if *ps2if)
 		ret = -ENODEV;
 	}
 
-	sa1111_writel(0, ps2if->base + SA1111_PS2CR);
+	sa1111_writel(0, ps2if->base + PS2CR);
 
 	return ret;
 }
@@ -274,8 +297,8 @@ static int __devinit ps2_probe(struct sa1111_dev *dev)
 	sa1111_enable_device(ps2if->dev);
 
 	/* Incoming clock is 8MHz */
-	sa1111_writel(0, ps2if->base + SA1111_PS2CLKDIV);
-	sa1111_writel(127, ps2if->base + SA1111_PS2PRECNT);
+	sa1111_writel(0, ps2if->base + PS2CLKDIV);
+	sa1111_writel(127, ps2if->base + PS2PRECNT);
 
 	/*
 	 * Flush any pending input.
@@ -330,6 +353,7 @@ static int __devexit ps2_remove(struct sa1111_dev *dev)
 static struct sa1111_driver ps2_driver = {
 	.drv = {
 		.name	= "sa1111-ps2",
+		.owner	= THIS_MODULE,
 	},
 	.devid		= SA1111_DEVID_PS2,
 	.probe		= ps2_probe,
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index ba70058..d0f7533 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -441,7 +441,6 @@ static ssize_t serio_rebind_driver(struct device *dev, struct device_attribute *
 	} else if ((drv = driver_find(buf, &serio_bus)) != NULL) {
 		serio_disconnect_port(serio);
 		error = serio_bind_driver(serio, to_serio_driver(drv));
-		put_driver(drv);
 		serio_remove_duplicate_events(serio, SERIO_RESCAN_PORT);
 	} else {
 		error = -EINVAL;
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index 4494233..59df2e7 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -165,31 +165,38 @@ static ssize_t serio_raw_read(struct file *file, char __user *buffer,
 	struct serio_raw *serio_raw = client->serio_raw;
 	char uninitialized_var(c);
 	ssize_t read = 0;
-	int retval;
+	int error;
 
-	if (serio_raw->dead)
-		return -ENODEV;
+	for (;;) {
+		if (serio_raw->dead)
+			return -ENODEV;
 
-	if (serio_raw->head == serio_raw->tail && (file->f_flags & O_NONBLOCK))
-		return -EAGAIN;
+		if (serio_raw->head == serio_raw->tail &&
+		    (file->f_flags & O_NONBLOCK))
+			return -EAGAIN;
 
-	retval = wait_event_interruptible(serio_raw->wait,
-			serio_raw->head != serio_raw->tail || serio_raw->dead);
-	if (retval)
-		return retval;
+		if (count == 0)
+			break;
 
-	if (serio_raw->dead)
-		return -ENODEV;
+		while (read < count && serio_raw_fetch_byte(serio_raw, &c)) {
+			if (put_user(c, buffer++))
+				return -EFAULT;
+			read++;
+		}
 
-	while (read < count && serio_raw_fetch_byte(serio_raw, &c)) {
-		if (put_user(c, buffer++)) {
-			retval = -EFAULT;
+		if (read)
 			break;
+
+		if (!(file->f_flags & O_NONBLOCK)) {
+			error = wait_event_interruptible(serio_raw->wait,
+					serio_raw->head != serio_raw->tail ||
+					serio_raw->dead);
+			if (error)
+				return error;
 		}
-		read++;
 	}
 
-	return read ?: retval;
+	return read;
 }
 
 static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
@@ -197,8 +204,7 @@ static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
 {
 	struct serio_raw_client *client = file->private_data;
 	struct serio_raw *serio_raw = client->serio_raw;
-	ssize_t written = 0;
-	int retval;
+	int retval = 0;
 	unsigned char c;
 
 	retval = mutex_lock_interruptible(&serio_raw_mutex);
@@ -218,16 +224,20 @@ static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
 			retval = -EFAULT;
 			goto out;
 		}
+
 		if (serio_write(serio_raw->serio, c)) {
-			retval = -EIO;
+			/* Either signal error or partial write */
+			if (retval == 0)
+				retval = -EIO;
 			goto out;
 		}
-		written++;
+
+		retval++;
 	}
 
 out:
 	mutex_unlock(&serio_raw_mutex);
-	return written ?: retval;
+	return retval;
 }
 
 static unsigned int serio_raw_poll(struct file *file, poll_table *wait)
@@ -432,15 +442,4 @@ static struct serio_driver serio_raw_drv = {
 	.manual_bind	= true,
 };
 
-static int __init serio_raw_init(void)
-{
-	return serio_register_driver(&serio_raw_drv);
-}
-
-static void __exit serio_raw_exit(void)
-{
-	serio_unregister_driver(&serio_raw_drv);
-}
-
-module_init(serio_raw_init);
-module_exit(serio_raw_exit);
+module_serio_driver(serio_raw_drv);
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index d96d4c2..1e983be 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -73,7 +73,8 @@ struct xps2data {
 	spinlock_t lock;
 	void __iomem *base_address;	/* virt. address of control registers */
 	unsigned int flags;
-	struct serio serio;		/* serio */
+	struct serio *serio;		/* serio */
+	struct device *dev;
 };
 
 /************************************/
@@ -119,7 +120,7 @@ static irqreturn_t xps2_interrupt(int irq, void *dev_id)
 
 	/* Check which interrupt is active */
 	if (intr_sr & XPS2_IPIXR_RX_OVF)
-		dev_warn(drvdata->serio.dev.parent, "receive overrun error\n");
+		dev_warn(drvdata->dev, "receive overrun error\n");
 
 	if (intr_sr & XPS2_IPIXR_RX_ERR)
 		drvdata->flags |= SERIO_PARITY;
@@ -132,10 +133,10 @@ static irqreturn_t xps2_interrupt(int irq, void *dev_id)
 
 		/* Error, if a byte is not received */
 		if (status) {
-			dev_err(drvdata->serio.dev.parent,
+			dev_err(drvdata->dev,
 				"wrong rcvd byte count (%d)\n", status);
 		} else {
-			serio_interrupt(&drvdata->serio, c, drvdata->flags);
+			serio_interrupt(drvdata->serio, c, drvdata->flags);
 			drvdata->flags = 0;
 		}
 	}
@@ -193,7 +194,7 @@ static int sxps2_open(struct serio *pserio)
 	error = request_irq(drvdata->irq, &xps2_interrupt, 0,
 				DRIVER_NAME, drvdata);
 	if (error) {
-		dev_err(drvdata->serio.dev.parent,
+		dev_err(drvdata->dev,
 			"Couldn't allocate interrupt %d\n", drvdata->irq);
 		return error;
 	}
@@ -259,15 +260,16 @@ static int __devinit xps2_of_probe(struct platform_device *ofdev)
 	}
 
 	drvdata = kzalloc(sizeof(struct xps2data), GFP_KERNEL);
-	if (!drvdata) {
-		dev_err(dev, "Couldn't allocate device private record\n");
-		return -ENOMEM;
+	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!drvdata || !serio) {
+		error = -ENOMEM;
+		goto failed1;
 	}
 
-	dev_set_drvdata(dev, drvdata);
-
 	spin_lock_init(&drvdata->lock);
 	drvdata->irq = r_irq.start;
+	drvdata->serio = serio;
+	drvdata->dev = dev;
 
 	phys_addr = r_mem.start;
 	remap_size = resource_size(&r_mem);
@@ -298,7 +300,6 @@ static int __devinit xps2_of_probe(struct platform_device *ofdev)
 		 (unsigned long long)phys_addr, drvdata->base_address,
 		 drvdata->irq);
 
-	serio = &drvdata->serio;
 	serio->id.type = SERIO_8042;
 	serio->write = sxps2_write;
 	serio->open = sxps2_open;
@@ -312,13 +313,14 @@ static int __devinit xps2_of_probe(struct platform_device *ofdev)
 
 	serio_register_port(serio);
 
+	platform_set_drvdata(ofdev, drvdata);
 	return 0;		/* success */
 
 failed2:
 	release_mem_region(phys_addr, remap_size);
 failed1:
+	kfree(serio);
 	kfree(drvdata);
-	dev_set_drvdata(dev, NULL);
 
 	return error;
 }
@@ -333,22 +335,21 @@ failed1:
  */
 static int __devexit xps2_of_remove(struct platform_device *of_dev)
 {
-	struct device *dev = &of_dev->dev;
-	struct xps2data *drvdata = dev_get_drvdata(dev);
+	struct xps2data *drvdata = platform_get_drvdata(of_dev);
 	struct resource r_mem; /* IO mem resources */
 
-	serio_unregister_port(&drvdata->serio);
+	serio_unregister_port(drvdata->serio);
 	iounmap(drvdata->base_address);
 
 	/* Get iospace of the device */
 	if (of_address_to_resource(of_dev->dev.of_node, 0, &r_mem))
-		dev_err(dev, "invalid address\n");
+		dev_err(drvdata->dev, "invalid address\n");
 	else
 		release_mem_region(r_mem.start, resource_size(&r_mem));
 
 	kfree(drvdata);
 
-	dev_set_drvdata(dev, NULL);
+	platform_set_drvdata(of_dev, NULL);
 
 	return 0;
 }
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 205d16a..a33d347 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -1856,7 +1856,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	if (i == ARRAY_SIZE(speeds)) {
 		dev_info(&intf->dev,
 			 "Aiptek tried all speeds, no sane response\n");
-		goto fail2;
+		goto fail3;
 	}
 
 	/* Associate this driver's struct with the usb interface.
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index b4842d0..b79d451 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -135,6 +135,6 @@ extern const struct usb_device_id wacom_ids[];
 
 void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len);
 void wacom_setup_device_quirks(struct wacom_features *features);
-void wacom_setup_input_capabilities(struct input_dev *input_dev,
-				    struct wacom_wac *wacom_wac);
+int wacom_setup_input_capabilities(struct input_dev *input_dev,
+				   struct wacom_wac *wacom_wac);
 #endif
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 0d26921..b3a8bd3 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -28,6 +28,7 @@
 #define HID_USAGE_Y_TILT		0x3e
 #define HID_USAGE_FINGER		0x22
 #define HID_USAGE_STYLUS		0x20
+#define HID_USAGE_CONTACTMAX		0x55
 #define HID_COLLECTION			0xa1
 #define HID_COLLECTION_LOGICAL		0x02
 #define HID_COLLECTION_END		0xc0
@@ -201,6 +202,27 @@ static int wacom_parse_logical_collection(unsigned char *report,
 	return length;
 }
 
+static void wacom_retrieve_report_data(struct usb_interface *intf,
+				       struct wacom_features *features)
+{
+	int result = 0;
+	unsigned char *rep_data;
+
+	rep_data = kmalloc(2, GFP_KERNEL);
+	if (rep_data) {
+
+		rep_data[0] = 12;
+		result = wacom_get_report(intf, WAC_HID_FEATURE_REPORT,
+					  rep_data[0], &rep_data, 2,
+					  WAC_MSG_RETRIES);
+
+		if (result >= 0 && rep_data[1] > 2)
+			features->touch_max = rep_data[1];
+
+		kfree(rep_data);
+	}
+}
+
 /*
  * Interface Descriptor of wacom devices can be incomplete and
  * inconsistent so wacom_features table is used to store stylus
@@ -233,6 +255,9 @@ static int wacom_parse_logical_collection(unsigned char *report,
  * 3rd gen Bamboo Touch no longer define a Digitizer-Finger Pysical
  * Collection. Instead they define a Logical Collection with a single
  * Logical Maximum for both X and Y.
+ *
+ * Intuos5 touch interface does not contain useful data. We deal with
+ * this after returning from this function.
  */
 static int wacom_parse_hid(struct usb_interface *intf,
 			   struct hid_descriptor *hid_desc,
@@ -292,6 +317,10 @@ static int wacom_parse_hid(struct usb_interface *intf,
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_TPC2FG;
 						}
+
+						if (features->type == MTSCREEN)
+							features->pktlen = WACOM_PKGLEN_MTOUCH;
+
 						if (features->type == BAMBOO_PT) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_BBTOUCH;
@@ -324,18 +353,15 @@ static int wacom_parse_hid(struct usb_interface *intf,
 			case HID_USAGE_Y:
 				if (usage == WCM_DESKTOP) {
 					if (finger) {
-						features->device_type = BTN_TOOL_FINGER;
-						if (features->type == TABLETPC2FG) {
-							/* need to reset back */
-							features->pktlen = WACOM_PKGLEN_TPC2FG;
+						int type = features->type;
+
+						if (type == TABLETPC2FG || type == MTSCREEN) {
 							features->y_max =
 								get_unaligned_le16(&report[i + 3]);
 							features->y_phy =
 								get_unaligned_le16(&report[i + 6]);
 							i += 7;
-						} else if (features->type == BAMBOO_PT) {
-							/* need to reset back */
-							features->pktlen = WACOM_PKGLEN_BBTOUCH;
+						} else if (type == BAMBOO_PT) {
 							features->y_phy =
 								get_unaligned_le16(&report[i + 3]);
 							features->y_max =
@@ -349,10 +375,6 @@ static int wacom_parse_hid(struct usb_interface *intf,
 							i += 4;
 						}
 					} else if (pen) {
-						/* penabled only accepts exact bytes of data */
-						if (features->type == TABLETPC2FG)
-							features->pktlen = WACOM_PKGLEN_GRAPHIRE;
-						features->device_type = BTN_TOOL_PEN;
 						features->y_max =
 							get_unaligned_le16(&report[i + 3]);
 						i += 4;
@@ -374,6 +396,11 @@ static int wacom_parse_hid(struct usb_interface *intf,
 				pen = 1;
 				i++;
 				break;
+
+			case HID_USAGE_CONTACTMAX:
+				wacom_retrieve_report_data(intf, features);
+				i++;
+				break;
 			}
 			break;
 
@@ -410,22 +437,29 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat
 	if (!rep_data)
 		return error;
 
-	/* ask to report tablet data if it is MT Tablet PC or
-	 * not a Tablet PC */
-	if (features->type == TABLETPC2FG) {
-		do {
-			rep_data[0] = 3;
-			rep_data[1] = 4;
-			rep_data[2] = 0;
-			rep_data[3] = 0;
-			report_id = 3;
-			error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
-						 report_id, rep_data, 4, 1);
-			if (error >= 0)
-				error = wacom_get_report(intf,
-						WAC_HID_FEATURE_REPORT,
-						report_id, rep_data, 4, 1);
-		} while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES);
+	/* ask to report Wacom data */
+	if (features->device_type == BTN_TOOL_FINGER) {
+		/* if it is an MT Tablet PC touch */
+		if (features->type == TABLETPC2FG ||
+		    features->type == MTSCREEN) {
+			do {
+				rep_data[0] = 3;
+				rep_data[1] = 4;
+				rep_data[2] = 0;
+				rep_data[3] = 0;
+				report_id = 3;
+				error = wacom_set_report(intf,
+							 WAC_HID_FEATURE_REPORT,
+							 report_id,
+							 rep_data, 4, 1);
+				if (error >= 0)
+					error = wacom_get_report(intf,
+							WAC_HID_FEATURE_REPORT,
+							report_id,
+							rep_data, 4, 1);
+			} while ((error < 0 || rep_data[1] != 4) &&
+				 limit++ < WAC_MSG_RETRIES);
+		}
 	} else if (features->type != TABLETPC &&
 		   features->type != WIRELESS &&
 		   features->device_type == BTN_TOOL_PEN) {
@@ -447,7 +481,7 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat
 }
 
 static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
-		struct wacom_features *features)
+					 struct wacom_features *features)
 {
 	int error = 0;
 	struct usb_host_interface *interface = intf->cur_altsetting;
@@ -475,16 +509,21 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
 		}
 	}
 
-	/* only Tablet PCs and Bamboo P&T need to retrieve the info */
-	if ((features->type != TABLETPC) && (features->type != TABLETPC2FG) &&
-	    (features->type != BAMBOO_PT))
+	/* only devices that support touch need to retrieve the info */
+	if (features->type != TABLETPC &&
+	    features->type != TABLETPC2FG &&
+	    features->type != BAMBOO_PT &&
+	    features->type != MTSCREEN) {
 		goto out;
+	}
 
-	if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
-		if (usb_get_extra_descriptor(&interface->endpoint[0],
-				HID_DEVICET_REPORT, &hid_desc)) {
-			printk("wacom: can not retrieve extra class descriptor\n");
-			error = 1;
+	error = usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc);
+	if (error) {
+		error = usb_get_extra_descriptor(&interface->endpoint[0],
+						 HID_DEVICET_REPORT, &hid_desc);
+		if (error) {
+			dev_err(&intf->dev,
+				"can not retrieve extra class descriptor\n");
 			goto out;
 		}
 	}
@@ -574,23 +613,39 @@ static void wacom_remove_shared_data(struct wacom_wac *wacom)
 static int wacom_led_control(struct wacom *wacom)
 {
 	unsigned char *buf;
-	int retval, led = 0;
+	int retval;
 
 	buf = kzalloc(9, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 
-	if (wacom->wacom_wac.features.type == WACOM_21UX2 ||
-	    wacom->wacom_wac.features.type == WACOM_24HD)
-		led = (wacom->led.select[1] << 4) | 0x40;
-
-	led |=  wacom->led.select[0] | 0x4;
-
-	buf[0] = WAC_CMD_LED_CONTROL;
-	buf[1] = led;
-	buf[2] = wacom->led.llv;
-	buf[3] = wacom->led.hlv;
-	buf[4] = wacom->led.img_lum;
+	if (wacom->wacom_wac.features.type >= INTUOS5S &&
+	    wacom->wacom_wac.features.type <= INTUOS5L)	{
+		/*
+		 * Touch Ring and crop mark LED luminance may take on
+		 * one of four values:
+		 *    0 = Low; 1 = Medium; 2 = High; 3 = Off
+		 */
+		int ring_led = wacom->led.select[0] & 0x03;
+		int ring_lum = (((wacom->led.llv & 0x60) >> 5) - 1) & 0x03;
+		int crop_lum = 0;
+
+		buf[0] = WAC_CMD_LED_CONTROL;
+		buf[1] = (crop_lum << 4) | (ring_lum << 2) | (ring_led);
+	}
+	else {
+		int led = wacom->led.select[0] | 0x4;
+
+		if (wacom->wacom_wac.features.type == WACOM_21UX2 ||
+		    wacom->wacom_wac.features.type == WACOM_24HD)
+			led |= (wacom->led.select[1] << 4) | 0x40;
+
+		buf[0] = WAC_CMD_LED_CONTROL;
+		buf[1] = led;
+		buf[2] = wacom->led.llv;
+		buf[3] = wacom->led.hlv;
+		buf[4] = wacom->led.img_lum;
+	}
 
 	retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_LED_CONTROL,
 				  buf, 9, WAC_CMD_RETRIES);
@@ -783,6 +838,17 @@ static struct attribute_group intuos4_led_attr_group = {
 	.attrs = intuos4_led_attrs,
 };
 
+static struct attribute *intuos5_led_attrs[] = {
+	&dev_attr_status0_luminance.attr,
+	&dev_attr_status_led0_select.attr,
+	NULL
+};
+
+static struct attribute_group intuos5_led_attr_group = {
+	.name = "wacom_led",
+	.attrs = intuos5_led_attrs,
+};
+
 static int wacom_initialize_leds(struct wacom *wacom)
 {
 	int error;
@@ -812,6 +878,19 @@ static int wacom_initialize_leds(struct wacom *wacom)
 					   &cintiq_led_attr_group);
 		break;
 
+	case INTUOS5S:
+	case INTUOS5:
+	case INTUOS5L:
+		wacom->led.select[0] = 0;
+		wacom->led.select[1] = 0;
+		wacom->led.llv = 32;
+		wacom->led.hlv = 0;
+		wacom->led.img_lum = 0;
+
+		error = sysfs_create_group(&wacom->intf->dev.kobj,
+					   &intuos5_led_attr_group);
+		break;
+
 	default:
 		return 0;
 	}
@@ -840,6 +919,13 @@ static void wacom_destroy_leds(struct wacom *wacom)
 		sysfs_remove_group(&wacom->intf->dev.kobj,
 				   &cintiq_led_attr_group);
 		break;
+
+	case INTUOS5S:
+	case INTUOS5:
+	case INTUOS5L:
+		sysfs_remove_group(&wacom->intf->dev.kobj,
+				   &intuos5_led_attr_group);
+		break;
 	}
 }
 
@@ -901,8 +987,10 @@ static int wacom_register_input(struct wacom *wacom)
 	int error;
 
 	input_dev = input_allocate_device();
-	if (!input_dev)
-		return -ENOMEM;
+	if (!input_dev) {
+		error = -ENOMEM;
+		goto fail1;
+	}
 
 	input_dev->name = wacom_wac->name;
 	input_dev->dev.parent = &intf->dev;
@@ -912,14 +1000,20 @@ static int wacom_register_input(struct wacom *wacom)
 	input_set_drvdata(input_dev, wacom);
 
 	wacom_wac->input = input_dev;
-	wacom_setup_input_capabilities(input_dev, wacom_wac);
+	error = wacom_setup_input_capabilities(input_dev, wacom_wac);
+	if (error)
+		goto fail1;
 
 	error = input_register_device(input_dev);
-	if (error) {
-		input_free_device(input_dev);
-		wacom_wac->input = NULL;
-	}
+	if (error)
+		goto fail2;
 
+	return 0;
+
+fail2:
+	input_free_device(input_dev);
+	wacom_wac->input = NULL;
+fail1:
 	return error;
 }
 
@@ -938,22 +1032,22 @@ static void wacom_wireless_work(struct work_struct *work)
 	wacom = usb_get_intfdata(usbdev->config->interface[1]);
 	if (wacom->wacom_wac.input)
 		input_unregister_device(wacom->wacom_wac.input);
-	wacom->wacom_wac.input = 0;
+	wacom->wacom_wac.input = NULL;
 
 	/* Touch interface */
 	wacom = usb_get_intfdata(usbdev->config->interface[2]);
 	if (wacom->wacom_wac.input)
 		input_unregister_device(wacom->wacom_wac.input);
-	wacom->wacom_wac.input = 0;
+	wacom->wacom_wac.input = NULL;
 
 	if (wacom_wac->pid == 0) {
-		printk(KERN_INFO "wacom: wireless tablet disconnected\n");
+		dev_info(&wacom->intf->dev, "wireless tablet disconnected\n");
 	} else {
 		const struct usb_device_id *id = wacom_ids;
 
-		printk(KERN_INFO
-		       "wacom: wireless tablet connected with PID %x\n",
-		       wacom_wac->pid);
+		dev_info(&wacom->intf->dev,
+			 "wireless tablet connected with PID %x\n",
+			 wacom_wac->pid);
 
 		while (id->match_flags) {
 			if (id->idVendor == USB_VENDOR_ID_WACOM &&
@@ -963,8 +1057,8 @@ static void wacom_wireless_work(struct work_struct *work)
 		}
 
 		if (!id->match_flags) {
-			printk(KERN_INFO
-			       "wacom: ignorning unknown PID.\n");
+			dev_info(&wacom->intf->dev,
+				 "ignoring unknown PID.\n");
 			return;
 		}
 
@@ -1035,11 +1129,33 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	endpoint = &intf->cur_altsetting->endpoint[0].desc;
 
-	/* Retrieve the physical and logical size for OEM devices */
+	/* Retrieve the physical and logical size for touch devices */
 	error = wacom_retrieve_hid_descriptor(intf, features);
 	if (error)
 		goto fail3;
 
+	/*
+	 * Intuos5 has no useful data about its touch interface in its
+	 * HID descriptor. If this is the touch interface (wMaxPacketSize
+	 * of WACOM_PKGLEN_BBTOUCH3), override the table values.
+	 */
+	if (features->type >= INTUOS5S && features->type <= INTUOS5L) {
+		if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
+			features->device_type = BTN_TOOL_FINGER;
+			features->pktlen = WACOM_PKGLEN_BBTOUCH3;
+
+			features->x_phy =
+				(features->x_max * 100) / features->x_resolution;
+			features->y_phy =
+				(features->y_max * 100) / features->y_resolution;
+
+			features->x_max = 4096;
+			features->y_max = 4096;
+		} else {
+			features->device_type = BTN_TOOL_PEN;
+		}
+	}
+
 	wacom_setup_device_quirks(features);
 
 	strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index cecd35c..004bc1b 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -61,7 +61,8 @@ static int wacom_penpartner_irq(struct wacom_wac *wacom)
 		break;
 
 	default:
-		printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]);
+		dev_dbg(input->dev.parent,
+			"%s: received unknown report #%d\n", __func__, data[0]);
 		return 0;
         }
 
@@ -76,7 +77,8 @@ static int wacom_pl_irq(struct wacom_wac *wacom)
 	int prox, pressure;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
-		dbg("wacom_pl_irq: received unknown report #%d", data[0]);
+		dev_dbg(input->dev.parent,
+			"%s: received unknown report #%d\n", __func__, data[0]);
 		return 0;
 	}
 
@@ -146,7 +148,8 @@ static int wacom_ptu_irq(struct wacom_wac *wacom)
 	struct input_dev *input = wacom->input;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
-		printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
+		dev_dbg(input->dev.parent,
+			"%s: received unknown report #%d\n", __func__, data[0]);
 		return 0;
 	}
 
@@ -175,7 +178,8 @@ static int wacom_dtu_irq(struct wacom_wac *wacom)
 	struct input_dev *input = wacom->input;
 	int prox = data[1] & 0x20, pressure;
 
-	dbg("wacom_dtu_irq: received report #%d", data[0]);
+	dev_dbg(input->dev.parent,
+		"%s: received report #%d", __func__, data[0]);
 
 	if (prox) {
 		/* Going into proximity select tool */
@@ -211,7 +215,8 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
 	int retval = 0;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
-		dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
+		dev_dbg(input->dev.parent,
+			"%s: received unknown report #%d\n", __func__, data[0]);
 		goto exit;
 	}
 
@@ -321,6 +326,9 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 
 	/* Enter report */
 	if ((data[1] & 0xfc) == 0xc0) {
+		if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+			wacom->shared->stylus_in_proximity = true;
+
 		/* serial number of the tool */
 		wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
 			(data[4] << 20) + (data[5] << 12) +
@@ -406,6 +414,9 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 
 	/* Exit report */
 	if ((data[1] & 0xfe) == 0x80) {
+		if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+			wacom->shared->stylus_in_proximity = false;
+
 		/*
 		 * Reset all states otherwise we lose the initial states
 		 * when in-prox next time
@@ -452,6 +463,7 @@ static void wacom_intuos_general(struct wacom_wac *wacom)
 	if ((data[1] & 0xb8) == 0xa0) {
 		t = (data[6] << 2) | ((data[7] >> 6) & 3);
 		if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
+                    (features->type >= INTUOS5S && features->type <= INTUOS5L) ||
 		    features->type == WACOM_21UX2 || features->type == WACOM_24HD) {
 			t = (t << 1) | (data[1] & 1);
 		}
@@ -482,9 +494,13 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 	unsigned int t;
 	int idx = 0, result;
 
-	if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_INTUOSREAD
-		&& data[0] != WACOM_REPORT_INTUOSWRITE && data[0] != WACOM_REPORT_INTUOSPAD) {
-		dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
+	if (data[0] != WACOM_REPORT_PENABLED &&
+	    data[0] != WACOM_REPORT_INTUOSREAD &&
+	    data[0] != WACOM_REPORT_INTUOSWRITE &&
+	    data[0] != WACOM_REPORT_INTUOSPAD &&
+	    data[0] != WACOM_REPORT_INTUOS5PAD) {
+		dev_dbg(input->dev.parent,
+			"%s: received unknown report #%d\n", __func__, data[0]);
                 return 0;
 	}
 
@@ -493,7 +509,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 		idx = data[1] & 0x01;
 
 	/* pad packets. Works as a second tool and is always in prox */
-	if (data[0] == WACOM_REPORT_INTUOSPAD) {
+	if (data[0] == WACOM_REPORT_INTUOSPAD || data[0] == WACOM_REPORT_INTUOS5PAD) {
 		if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
 			input_report_key(input, BTN_0, (data[2] & 0x01));
 			input_report_key(input, BTN_1, (data[3] & 0x01));
@@ -569,6 +585,34 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 				input_report_key(input, wacom->tool[1], 0);
 				input_report_abs(input, ABS_MISC, 0);
 			}
+		} else if (features->type >= INTUOS5S && features->type <= INTUOS5L) {
+			int i;
+
+			/* Touch ring mode switch has no capacitive sensor */
+			input_report_key(input, BTN_0, (data[3] & 0x01));
+
+			/*
+			 * ExpressKeys on Intuos5 have a capacitive sensor in
+			 * addition to the mechanical switch. Switch data is
+			 * stored in data[4], capacitive data in data[5].
+			 */
+			for (i = 0; i < 8; i++)
+				input_report_key(input, BTN_1 + i, data[4] & (1 << i));
+
+			if (data[2] & 0x80) {
+				input_report_abs(input, ABS_WHEEL, (data[2] & 0x7f));
+			} else {
+				/* Out of proximity, clear wheel value. */
+				input_report_abs(input, ABS_WHEEL, 0);
+			}
+
+			if (data[2] | (data[3] & 0x01) | data[4]) {
+				input_report_key(input, wacom->tool[1], 1);
+				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+			} else {
+				input_report_key(input, wacom->tool[1], 0);
+				input_report_abs(input, ABS_MISC, 0);
+			}
 		} else {
 			if (features->type == WACOM_21UX2) {
 				input_report_key(input, BTN_0, (data[5] & 0x01));
@@ -632,7 +676,9 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 	    (features->type == INTUOS3 ||
 	     features->type == INTUOS3S ||
 	     features->type == INTUOS4 ||
-	     features->type == INTUOS4S)) {
+	     features->type == INTUOS4S ||
+	     features->type == INTUOS5 ||
+	     features->type == INTUOS5S)) {
 
 		return 0;
 	}
@@ -685,7 +731,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 
 		} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
 			/* I4 mouse */
-			if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
+			if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
+			    (features->type >= INTUOS5S && features->type <= INTUOS5L)) {
 				input_report_key(input, BTN_LEFT,   data[6] & 0x01);
 				input_report_key(input, BTN_MIDDLE, data[6] & 0x02);
 				input_report_key(input, BTN_RIGHT,  data[6] & 0x04);
@@ -712,7 +759,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 				}
 			}
 		} else if ((features->type < INTUOS3S || features->type == INTUOS3L ||
-				features->type == INTUOS4L) &&
+				features->type == INTUOS4L || features->type == INTUOS5L) &&
 			   wacom->tool[idx] == BTN_TOOL_LENS) {
 			/* Lens cursor packets */
 			input_report_key(input, BTN_LEFT,   data[8] & 0x01);
@@ -729,6 +776,72 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 	return 1;
 }
 
+static int find_slot_from_contactid(struct wacom_wac *wacom, int contactid)
+{
+	int touch_max = wacom->features.touch_max;
+	int i;
+
+	if (!wacom->slots)
+		return -1;
+
+	for (i = 0; i < touch_max; ++i) {
+		if (wacom->slots[i] == contactid)
+			return i;
+	}
+	for (i = 0; i < touch_max; ++i) {
+		if (wacom->slots[i] == -1)
+			return i;
+	}
+	return -1;
+}
+
+static int wacom_mt_touch(struct wacom_wac *wacom)
+{
+	struct input_dev *input = wacom->input;
+	char *data = wacom->data;
+	int i;
+	int current_num_contacts = data[2];
+	int contacts_to_send = 0;
+
+	/*
+	 * First packet resets the counter since only the first
+	 * packet in series will have non-zero current_num_contacts.
+	 */
+	if (current_num_contacts)
+		wacom->num_contacts_left = current_num_contacts;
+
+	/* There are at most 5 contacts per packet */
+	contacts_to_send = min(5, wacom->num_contacts_left);
+
+	for (i = 0; i < contacts_to_send; i++) {
+		int offset = (WACOM_BYTES_PER_MT_PACKET * i) + 3;
+		bool touch = data[offset] & 0x1;
+		int id = le16_to_cpup((__le16 *)&data[offset + 1]);
+		int slot = find_slot_from_contactid(wacom, id);
+
+		if (slot < 0)
+			continue;
+
+		input_mt_slot(input, slot);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+		if (touch) {
+			int x = le16_to_cpup((__le16 *)&data[offset + 7]);
+			int y = le16_to_cpup((__le16 *)&data[offset + 9]);
+			input_report_abs(input, ABS_MT_POSITION_X, x);
+			input_report_abs(input, ABS_MT_POSITION_Y, y);
+		}
+		wacom->slots[slot] = touch ? id : -1;
+	}
+
+	input_mt_report_pointer_emulation(input, true);
+
+	wacom->num_contacts_left -= contacts_to_send;
+	if (wacom->num_contacts_left < 0)
+		wacom->num_contacts_left = 0;
+
+	return 1;
+}
+
 static int wacom_tpc_mt_touch(struct wacom_wac *wacom)
 {
 	struct input_dev *input = wacom->input;
@@ -767,6 +880,9 @@ static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
 	bool prox;
 	int x = 0, y = 0;
 
+	if (wacom->features.touch_max > 1 || len > WACOM_PKGLEN_TPC2FG)
+		return 0;
+
 	if (!wacom->shared->stylus_in_proximity) {
 		if (len == WACOM_PKGLEN_TPC1FG) {
 			prox = data[0] & 0x01;
@@ -830,14 +946,15 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 {
 	char *data = wacom->data;
 
-	dbg("wacom_tpc_irq: received report #%d", data[0]);
+	dev_dbg(wacom->input->dev.parent,
+		"%s: received report #%d\n", __func__, data[0]);
 
 	switch (len) {
 	case WACOM_PKGLEN_TPC1FG:
-		 return wacom_tpc_single_touch(wacom, len);
+		return wacom_tpc_single_touch(wacom, len);
 
 	case WACOM_PKGLEN_TPC2FG:
- 		return wacom_tpc_mt_touch(wacom);
+		return wacom_tpc_mt_touch(wacom);
 
 	default:
 		switch (data[0]) {
@@ -846,6 +963,9 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 		case WACOM_REPORT_TPCST:
 			return wacom_tpc_single_touch(wacom, len);
 
+		case WACOM_REPORT_TPCMT:
+			return wacom_mt_touch(wacom);
+
 		case WACOM_REPORT_PENABLED:
 			return wacom_tpc_pen(wacom);
 		}
@@ -1114,8 +1234,18 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 		sync = wacom_intuos_irq(wacom_wac);
 		break;
 
+	case INTUOS5S:
+	case INTUOS5:
+	case INTUOS5L:
+		if (len == WACOM_PKGLEN_BBTOUCH3)
+			sync = wacom_bpt3_touch(wacom_wac);
+		else
+			sync = wacom_intuos_irq(wacom_wac);
+		break;
+
 	case TABLETPC:
 	case TABLETPC2FG:
+	case MTSCREEN:
 		sync = wacom_tpc_irq(wacom_wac, len);
 		break;
 
@@ -1188,7 +1318,9 @@ void wacom_setup_device_quirks(struct wacom_features *features)
 
 	/* these device have multiple inputs */
 	if (features->type == TABLETPC || features->type == TABLETPC2FG ||
-	    features->type == BAMBOO_PT || features->type == WIRELESS)
+	    features->type == BAMBOO_PT || features->type == WIRELESS ||
+	    (features->type >= INTUOS5S && features->type <= INTUOS5L) ||
+	    features->type == MTSCREEN)
 		features->quirks |= WACOM_QUIRK_MULTI_INPUT;
 
 	/* quirk for bamboo touch with 2 low res touches */
@@ -1219,8 +1351,8 @@ static unsigned int wacom_calculate_touch_res(unsigned int logical_max,
        return (logical_max * 100) / physical_max;
 }
 
-void wacom_setup_input_capabilities(struct input_dev *input_dev,
-				    struct wacom_wac *wacom_wac)
+int wacom_setup_input_capabilities(struct input_dev *input_dev,
+				   struct wacom_wac *wacom_wac)
 {
 	struct wacom_features *features = &wacom_wac->features;
 	int i;
@@ -1355,6 +1487,50 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 		wacom_setup_intuos(wacom_wac);
 		break;
 
+	case INTUOS5:
+	case INTUOS5L:
+		if (features->device_type == BTN_TOOL_PEN) {
+			__set_bit(BTN_7, input_dev->keybit);
+			__set_bit(BTN_8, input_dev->keybit);
+		}
+		/* fall through */
+
+	case INTUOS5S:
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+		if (features->device_type == BTN_TOOL_PEN) {
+			for (i = 0; i < 7; i++)
+				__set_bit(BTN_0 + i, input_dev->keybit);
+
+			input_set_abs_params(input_dev, ABS_DISTANCE, 0,
+					      features->distance_max,
+					      0, 0);
+
+			input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+
+			wacom_setup_intuos(wacom_wac);
+		} else if (features->device_type == BTN_TOOL_FINGER) {
+			__clear_bit(ABS_MISC, input_dev->absbit);
+
+			__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+			__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+			__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+			__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
+
+			input_mt_init_slots(input_dev, features->touch_max);
+
+			input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			                     0, 255, 0, 0);
+
+			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+					     0, features->x_max,
+					     features->x_fuzz, 0);
+			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+					     0, features->y_max,
+					     features->y_fuzz, 0);
+		}
+		break;
+
 	case INTUOS4:
 	case INTUOS4L:
 		__set_bit(BTN_7, input_dev->keybit);
@@ -1372,9 +1548,19 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 		break;
 
 	case TABLETPC2FG:
+	case MTSCREEN:
 		if (features->device_type == BTN_TOOL_FINGER) {
 
-			input_mt_init_slots(input_dev, 2);
+			wacom_wac->slots = kmalloc(features->touch_max *
+							sizeof(int),
+						   GFP_KERNEL);
+			if (!wacom_wac->slots)
+				return -ENOMEM;
+
+			for (i = 0; i < features->touch_max; i++)
+				wacom_wac->slots[i] = -1;
+
+			input_mt_init_slots(input_dev, features->touch_max);
 			input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
 					0, MT_TOOL_MAX, 0, 0);
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
@@ -1429,6 +1615,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 
 			__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
 			__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+			input_mt_init_slots(input_dev, features->touch_max);
 
 			if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
 				__set_bit(BTN_TOOL_TRIPLETAP,
@@ -1436,13 +1623,9 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 				__set_bit(BTN_TOOL_QUADTAP,
 					  input_dev->keybit);
 
-				input_mt_init_slots(input_dev, 16);
-
 				input_set_abs_params(input_dev,
 						     ABS_MT_TOUCH_MAJOR,
 						     0, 255, 0, 0);
-			} else {
-				input_mt_init_slots(input_dev, 2);
 			}
 
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
@@ -1462,6 +1645,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 		}
 		break;
 	}
+	return 0;
 }
 
 static const struct wacom_features wacom_features_0x00 =
@@ -1629,6 +1813,24 @@ static const struct wacom_features wacom_features_0xBB =
 static const struct wacom_features wacom_features_0xBC =
 	{ "Wacom Intuos4 WL",     WACOM_PKGLEN_INTUOS,    40840, 25400, 2047,
 	  63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x26 =
+	{ "Wacom Intuos5 touch S", WACOM_PKGLEN_INTUOS,  31496, 19685, 2047,
+	  63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  .touch_max = 16 };
+static const struct wacom_features wacom_features_0x27 =
+	{ "Wacom Intuos5 touch M", WACOM_PKGLEN_INTUOS,  44704, 27940, 2047,
+	  63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  .touch_max = 16 };
+static const struct wacom_features wacom_features_0x28 =
+	{ "Wacom Intuos5 touch L", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047,
+	  63, INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  .touch_max = 16 };
+static const struct wacom_features wacom_features_0x29 =
+	{ "Wacom Intuos5 S", WACOM_PKGLEN_INTUOS,  31496, 19685, 2047,
+	  63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x2A =
+	{ "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS,  44704, 27940, 2047,
+	  63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xF4 =
 	{ "Wacom Cintiq 24HD",    WACOM_PKGLEN_INTUOS,   104480, 65600, 2047,
 	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
@@ -1670,13 +1872,19 @@ static const struct wacom_features wacom_features_0x9F =
 	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xE2 =
 	{ "Wacom ISDv4 E2",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,
-	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xE3 =
 	{ "Wacom ISDv4 E3",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,
-	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
+static const struct wacom_features wacom_features_0xE5 =
+	{ "Wacom ISDv4 E5",       WACOM_PKGLEN_MTOUCH,    26202, 16325,  255,
+	  0, MTSCREEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xE6 =
 	{ "Wacom ISDv4 E6",       WACOM_PKGLEN_TPC2FG,    27760, 15694,  255,
-	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	.touch_max = 2 };
 static const struct wacom_features wacom_features_0xEC =
 	{ "Wacom ISDv4 EC",       WACOM_PKGLEN_GRAPHIRE,  25710, 14500,  255,
 	  0, TABLETPC,    WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1685,19 +1893,22 @@ static const struct wacom_features wacom_features_0x47 =
 	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x84 =
 	{ "Wacom Wireless Receiver", WACOM_PKGLEN_WIRELESS, 0, 0, 0,
-	  0, WIRELESS, 0, 0 };
+	  0, WIRELESS, 0, 0, .touch_max = 16 };
 static const struct wacom_features wacom_features_0xD0 =
 	{ "Wacom Bamboo 2FG",     WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD1 =
 	{ "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD2 =
 	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
 	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD3 =
 	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13700, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD4 =
 	{ "Wacom Bamboo Pen",     WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
 	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1706,28 +1917,35 @@ static const struct wacom_features wacom_features_0xD5 =
 	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD6 =
 	{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN,   14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD7 =
 	{ "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD8 =
 	{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN,   21648, 13700, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xDA =
 	{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN,  14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static struct wacom_features wacom_features_0xDB =
 	{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN,  21648, 13700, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xDD =
         { "Wacom Bamboo Connect", WACOM_PKGLEN_BBPEN,     14720,  9200, 1023,
           31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xDE =
         { "Wacom Bamboo 16FG 4x5", WACOM_PKGLEN_BBPEN,    14720,  9200, 1023,
-          31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 16 };
 static const struct wacom_features wacom_features_0xDF =
         { "Wacom Bamboo 16FG 6x8", WACOM_PKGLEN_BBPEN,    21648, 13700, 1023,
-          31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 16 };
 static const struct wacom_features wacom_features_0x6004 =
 	{ "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800,  8000,  255,
 	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1801,6 +2019,11 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xBA) },
 	{ USB_DEVICE_WACOM(0xBB) },
 	{ USB_DEVICE_WACOM(0xBC) },
+	{ USB_DEVICE_WACOM(0x26) },
+	{ USB_DEVICE_WACOM(0x27) },
+	{ USB_DEVICE_WACOM(0x28) },
+	{ USB_DEVICE_WACOM(0x29) },
+	{ USB_DEVICE_WACOM(0x2A) },
 	{ USB_DEVICE_WACOM(0x3F) },
 	{ USB_DEVICE_WACOM(0xC5) },
 	{ USB_DEVICE_WACOM(0xC6) },
@@ -1836,6 +2059,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x9F) },
 	{ USB_DEVICE_WACOM(0xE2) },
 	{ USB_DEVICE_WACOM(0xE3) },
+	{ USB_DEVICE_WACOM(0xE5) },
 	{ USB_DEVICE_WACOM(0xE6) },
 	{ USB_DEVICE_WACOM(0xEC) },
 	{ USB_DEVICE_WACOM(0x47) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index ba5a334..78fbd3f 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -25,6 +25,10 @@
 #define WACOM_PKGLEN_BBTOUCH3	64
 #define WACOM_PKGLEN_BBPEN	10
 #define WACOM_PKGLEN_WIRELESS	32
+#define WACOM_PKGLEN_MTOUCH	62
+
+/* wacom data size per MT contact */
+#define WACOM_BYTES_PER_MT_PACKET	11
 
 /* device IDs */
 #define STYLUS_DEVICE_ID	0x02
@@ -38,8 +42,10 @@
 #define WACOM_REPORT_INTUOSREAD		5
 #define WACOM_REPORT_INTUOSWRITE	6
 #define WACOM_REPORT_INTUOSPAD		12
+#define WACOM_REPORT_INTUOS5PAD		3
 #define WACOM_REPORT_TPC1FG		6
 #define WACOM_REPORT_TPC2FG		13
+#define WACOM_REPORT_TPCMT		13
 #define WACOM_REPORT_TPCHID		15
 #define WACOM_REPORT_TPCST		16
 
@@ -65,6 +71,9 @@ enum {
 	INTUOS4S,
 	INTUOS4,
 	INTUOS4L,
+	INTUOS5S,
+	INTUOS5,
+	INTUOS5L,
 	WACOM_24HD,
 	WACOM_21UX2,
 	CINTIQ,
@@ -72,6 +81,7 @@ enum {
 	WACOM_MO,
 	TABLETPC,
 	TABLETPC2FG,
+	MTSCREEN,
 	MAX_TYPE
 };
 
@@ -95,6 +105,7 @@ struct wacom_features {
 	int pressure_fuzz;
 	int distance_fuzz;
 	unsigned quirks;
+	unsigned touch_max;
 };
 
 struct wacom_shared {
@@ -113,6 +124,8 @@ struct wacom_wac {
 	struct input_dev *input;
 	int pid;
 	int battery_capacity;
+	int num_contacts_left;
+	int *slots;
 };
 
 #endif
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 97b31a0..f67657b 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -187,6 +187,23 @@ config TOUCHSCREEN_DA9034
 	  Say Y here to enable the support for the touchscreen found
 	  on Dialog Semiconductor DA9034 PMIC.
 
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called da9034-ts.
+
+config TOUCHSCREEN_DA9052
+	tristate "Dialog DA9052/DA9053 TSI"
+	depends on PMIC_DA9052
+	help
+	  Say Y here to support the touchscreen found on Dialog Semiconductor
+	  DA9052-BC and DA9053-AA/Bx PMICs.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called da9052_tsi.
+
 config TOUCHSCREEN_DYNAPRO
 	tristate "Dynapro serial touchscreen"
 	select SERIO
@@ -260,7 +277,7 @@ config TOUCHSCREEN_ILI210X
 
 config TOUCHSCREEN_S3C2410
 	tristate "Samsung S3C2410/generic touchscreen input driver"
-	depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
+	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 	select S3C_ADC
 	help
 	  Say Y here if you have the s3c2410 touchscreen.
@@ -306,6 +323,18 @@ config TOUCHSCREEN_WACOM_W8001
 	  To compile this driver as a module, choose M here: the
 	  module will be called wacom_w8001.
 
+config TOUCHSCREEN_WACOM_I2C
+	tristate "Wacom Tablet support (I2C)"
+	depends on I2C
+	help
+	  Say Y here if you want to use the I2C version of the Wacom
+	  Pen Tablet.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called wacom_i2c.
+
 config TOUCHSCREEN_LPC32XX
 	tristate "LPC32XX touchscreen controller"
 	depends on ARCH_LPC32XX
@@ -635,6 +664,7 @@ config TOUCHSCREEN_USB_COMPOSITE
 	  - Zytronic controllers
 	  - Elo TouchSystems 2700 IntelliTouch
 	  - EasyTouch USB Touch Controller from Data Modul
+	  - e2i (Mimo monitors)
 
 	  Have a look at <http://linux.chapter7.ch/touchkit/> for
 	  a usage description and the required user-space stuff.
@@ -721,7 +751,7 @@ config TOUCHSCREEN_USB_ELO
 
 config TOUCHSCREEN_USB_E2I
 	default y
-	bool "e2i Touchscreen controller (e.g. from Mimo 740)"
+	bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_ZYTRONIC
@@ -744,7 +774,7 @@ config TOUCHSCREEN_USB_EASYTOUCH
 	bool "EasyTouch USB Touch controller device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE
 	help
-	  Say Y here if you have a EasyTouch USB Touch controller device support.
+	  Say Y here if you have an EasyTouch USB Touch controller.
 	  If unsure, say N.
 
 config TOUCHSCREEN_TOUCHIT213
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 3d5cf8c..eb8bfe1 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI)	+= cyttsp_spi.o
 obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
+obj-$(CONFIG_TOUCHSCREEN_DA9052)	+= da9052_tsi.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
 obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
@@ -59,6 +60,7 @@ obj-$(CONFIG_TOUCHSCREEN_TSC2005)	+= tsc2005.o
 obj-$(CONFIG_TOUCHSCREEN_TSC2007)	+= tsc2007.o
 obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
 obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o
+obj-$(CONFIG_TOUCHSCREEN_WACOM_I2C)	+= wacom_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_WM831X)	+= wm831x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX)	+= wm97xx-ts.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)	+= wm9705.o
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 19d4ea6..42e6450 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -236,7 +236,6 @@ struct mxt_object {
 struct mxt_message {
 	u8 reportid;
 	u8 message[7];
-	u8 checksum;
 };
 
 struct mxt_finger {
@@ -326,17 +325,12 @@ static bool mxt_object_writable(unsigned int type)
 }
 
 static void mxt_dump_message(struct device *dev,
-				  struct mxt_message *message)
+			     struct mxt_message *message)
 {
-	dev_dbg(dev, "reportid:\t0x%x\n", message->reportid);
-	dev_dbg(dev, "message1:\t0x%x\n", message->message[0]);
-	dev_dbg(dev, "message2:\t0x%x\n", message->message[1]);
-	dev_dbg(dev, "message3:\t0x%x\n", message->message[2]);
-	dev_dbg(dev, "message4:\t0x%x\n", message->message[3]);
-	dev_dbg(dev, "message5:\t0x%x\n", message->message[4]);
-	dev_dbg(dev, "message6:\t0x%x\n", message->message[5]);
-	dev_dbg(dev, "message7:\t0x%x\n", message->message[6]);
-	dev_dbg(dev, "checksum:\t0x%x\n", message->checksum);
+	dev_dbg(dev, "reportid: %u\tmessage: %02x %02x %02x %02x %02x %02x %02x\n",
+		message->reportid, message->message[0], message->message[1],
+		message->message[2], message->message[3], message->message[4],
+		message->message[5], message->message[6]);
 }
 
 static int mxt_check_bootloader(struct i2c_client *client,
@@ -506,7 +500,7 @@ static int mxt_write_object(struct mxt_data *data,
 	u16 reg;
 
 	object = mxt_get_object(data, type);
-	if (!object)
+	if (!object || offset >= object->size + 1)
 		return -EINVAL;
 
 	reg = object->start_address;
@@ -1049,8 +1043,8 @@ static ssize_t mxt_update_fw_store(struct device *dev,
 	return count;
 }
 
-static DEVICE_ATTR(object, 0444, mxt_object_show, NULL);
-static DEVICE_ATTR(update_fw, 0664, NULL, mxt_update_fw_store);
+static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
+static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
 
 static struct attribute *mxt_attrs[] = {
 	&dev_attr_object.attr,
@@ -1201,7 +1195,7 @@ static int __devexit mxt_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int mxt_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -1239,13 +1233,10 @@ static int mxt_resume(struct device *dev)
 
 	return 0;
 }
-
-static const struct dev_pm_ops mxt_pm_ops = {
-	.suspend	= mxt_suspend,
-	.resume		= mxt_resume,
-};
 #endif
 
+static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
+
 static const struct i2c_device_id mxt_id[] = {
 	{ "qt602240_ts", 0 },
 	{ "atmel_mxt_ts", 0 },
@@ -1258,9 +1249,7 @@ static struct i2c_driver mxt_driver = {
 	.driver = {
 		.name	= "atmel_mxt_ts",
 		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
 		.pm	= &mxt_pm_ops,
-#endif
 	},
 	.probe		= mxt_probe,
 	.remove		= __devexit_p(mxt_remove),
diff --git a/drivers/input/touchscreen/da9052_tsi.c b/drivers/input/touchscreen/da9052_tsi.c
new file mode 100644
index 0000000..e8df341
--- /dev/null
+++ b/drivers/input/touchscreen/da9052_tsi.c
@@ -0,0 +1,370 @@
+/*
+ * TSI driver for Dialog DA9052
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+
+#include <linux/mfd/da9052/reg.h>
+#include <linux/mfd/da9052/da9052.h>
+
+#define TSI_PEN_DOWN_STATUS 0x40
+
+struct da9052_tsi {
+	struct da9052 *da9052;
+	struct input_dev *dev;
+	struct delayed_work ts_pen_work;
+	struct mutex mutex;
+	unsigned int irq_pendwn;
+	unsigned int irq_datardy;
+	bool stopped;
+	bool adc_on;
+};
+
+static void da9052_ts_adc_toggle(struct da9052_tsi *tsi, bool on)
+{
+	da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 0, on);
+	tsi->adc_on = on;
+}
+
+static irqreturn_t da9052_ts_pendwn_irq(int irq, void *data)
+{
+	struct da9052_tsi *tsi = data;
+
+	if (!tsi->stopped) {
+		/* Mask PEN_DOWN event and unmask TSI_READY event */
+		disable_irq_nosync(tsi->irq_pendwn);
+		enable_irq(tsi->irq_datardy);
+
+		da9052_ts_adc_toggle(tsi, true);
+
+		schedule_delayed_work(&tsi->ts_pen_work, HZ / 50);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void da9052_ts_read(struct da9052_tsi *tsi)
+{
+	struct input_dev *input = tsi->dev;
+	int ret;
+	u16 x, y, z;
+	u8 v;
+
+	ret = da9052_reg_read(tsi->da9052, DA9052_TSI_X_MSB_REG);
+	if (ret < 0)
+		return;
+
+	x = (u16) ret;
+
+	ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Y_MSB_REG);
+	if (ret < 0)
+		return;
+
+	y = (u16) ret;
+
+	ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Z_MSB_REG);
+	if (ret < 0)
+		return;
+
+	z = (u16) ret;
+
+	ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG);
+	if (ret < 0)
+		return;
+
+	v = (u8) ret;
+
+	x = ((x << 2) & 0x3fc) | (v & 0x3);
+	y = ((y << 2) & 0x3fc) | ((v & 0xc) >> 2);
+	z = ((z << 2) & 0x3fc) | ((v & 0x30) >> 4);
+
+	input_report_key(input, BTN_TOUCH, 1);
+	input_report_abs(input, ABS_X, x);
+	input_report_abs(input, ABS_Y, y);
+	input_report_abs(input, ABS_PRESSURE, z);
+	input_sync(input);
+}
+
+static irqreturn_t da9052_ts_datardy_irq(int irq, void *data)
+{
+	struct da9052_tsi *tsi = data;
+
+	da9052_ts_read(tsi);
+
+	return IRQ_HANDLED;
+}
+
+static void da9052_ts_pen_work(struct work_struct *work)
+{
+	struct da9052_tsi *tsi = container_of(work, struct da9052_tsi,
+					      ts_pen_work.work);
+	if (!tsi->stopped) {
+		int ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG);
+		if (ret < 0 || (ret & TSI_PEN_DOWN_STATUS)) {
+			/* Pen is still DOWN (or read error) */
+			schedule_delayed_work(&tsi->ts_pen_work, HZ / 50);
+		} else {
+			struct input_dev *input = tsi->dev;
+
+			/* Pen UP */
+			da9052_ts_adc_toggle(tsi, false);
+
+			/* Report Pen UP */
+			input_report_key(input, BTN_TOUCH, 0);
+			input_report_abs(input, ABS_PRESSURE, 0);
+			input_sync(input);
+
+			/*
+			 * FIXME: Fixes the unhandled irq issue when quick
+			 * pen down and pen up events occurs
+			 */
+			ret = da9052_reg_update(tsi->da9052,
+						DA9052_EVENT_B_REG, 0xC0, 0xC0);
+			if (ret < 0)
+				return;
+
+			/* Mask TSI_READY event and unmask PEN_DOWN event */
+			disable_irq(tsi->irq_datardy);
+			enable_irq(tsi->irq_pendwn);
+		}
+	}
+}
+
+static int __devinit da9052_ts_configure_gpio(struct da9052 *da9052)
+{
+	int error;
+
+	error = da9052_reg_update(da9052, DA9052_GPIO_2_3_REG, 0x30, 0);
+	if (error < 0)
+		return error;
+
+	error = da9052_reg_update(da9052, DA9052_GPIO_4_5_REG, 0x33, 0);
+	if (error < 0)
+		return error;
+
+	error = da9052_reg_update(da9052, DA9052_GPIO_6_7_REG, 0x33, 0);
+	if (error < 0)
+		return error;
+
+	return 0;
+}
+
+static int __devinit da9052_configure_tsi(struct da9052_tsi *tsi)
+{
+	int error;
+
+	error = da9052_ts_configure_gpio(tsi->da9052);
+	if (error)
+		return error;
+
+	/* Measure TSI sample every 1ms */
+	error = da9052_reg_update(tsi->da9052, DA9052_ADC_CONT_REG,
+				  1 << 6, 1 << 6);
+	if (error < 0)
+		return error;
+
+	/* TSI_DELAY: 3 slots, TSI_SKIP: 0 slots, TSI_MODE: XYZP */
+	error = da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 0xFC, 0xC0);
+	if (error < 0)
+		return error;
+
+	/* Supply TSIRef through LD09 */
+	error = da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x59);
+	if (error < 0)
+		return error;
+
+	return 0;
+}
+
+static int da9052_ts_input_open(struct input_dev *input_dev)
+{
+	struct da9052_tsi *tsi = input_get_drvdata(input_dev);
+
+	tsi->stopped = false;
+	mb();
+
+	/* Unmask PEN_DOWN event */
+	enable_irq(tsi->irq_pendwn);
+
+	/* Enable Pen Detect Circuit */
+	return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG,
+				 1 << 1, 1 << 1);
+}
+
+static void da9052_ts_input_close(struct input_dev *input_dev)
+{
+	struct da9052_tsi *tsi = input_get_drvdata(input_dev);
+
+	tsi->stopped = true;
+	mb();
+	disable_irq(tsi->irq_pendwn);
+	cancel_delayed_work_sync(&tsi->ts_pen_work);
+
+	if (tsi->adc_on) {
+		disable_irq(tsi->irq_datardy);
+		da9052_ts_adc_toggle(tsi, false);
+
+		/*
+		 * If ADC was on that means that pendwn IRQ was disabled
+		 * twice and we need to enable it to keep enable/disable
+		 * counter balanced. IRQ is still off though.
+		 */
+		enable_irq(tsi->irq_pendwn);
+	}
+
+	/* Disable Pen Detect Circuit */
+	da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0);
+}
+
+static int __devinit da9052_ts_probe(struct platform_device *pdev)
+{
+	struct da9052 *da9052;
+	struct da9052_tsi *tsi;
+	struct input_dev *input_dev;
+	int irq_pendwn;
+	int irq_datardy;
+	int error;
+
+	da9052 = dev_get_drvdata(pdev->dev.parent);
+	if (!da9052)
+		return -EINVAL;
+
+	irq_pendwn = platform_get_irq_byname(pdev, "PENDWN");
+	irq_datardy = platform_get_irq_byname(pdev, "TSIRDY");
+	if (irq_pendwn < 0 || irq_datardy < 0) {
+		dev_err(da9052->dev, "Unable to determine device interrupts\n");
+		return -ENXIO;
+	}
+
+	tsi = kzalloc(sizeof(struct da9052_tsi), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!tsi || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	tsi->da9052 = da9052;
+	tsi->dev = input_dev;
+	tsi->irq_pendwn = da9052->irq_base + irq_pendwn;
+	tsi->irq_datardy = da9052->irq_base + irq_datardy;
+	tsi->stopped = true;
+	INIT_DELAYED_WORK(&tsi->ts_pen_work, da9052_ts_pen_work);
+
+	input_dev->id.version = 0x0101;
+	input_dev->id.vendor = 0x15B6;
+	input_dev->id.product = 0x9052;
+	input_dev->name = "Dialog DA9052 TouchScreen Driver";
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = da9052_ts_input_open;
+	input_dev->close = da9052_ts_input_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1023, 0, 0);
+
+	input_set_drvdata(input_dev, tsi);
+
+	/* Disable Pen Detect Circuit */
+	da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0);
+
+	/* Disable ADC */
+	da9052_ts_adc_toggle(tsi, false);
+
+	error = request_threaded_irq(tsi->irq_pendwn,
+				     NULL, da9052_ts_pendwn_irq,
+				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				     "PENDWN", tsi);
+	if (error) {
+		dev_err(tsi->da9052->dev,
+			"Failed to register PENDWN IRQ %d, error = %d\n",
+			tsi->irq_pendwn, error);
+		goto err_free_mem;
+	}
+
+	error = request_threaded_irq(tsi->irq_datardy,
+				     NULL, da9052_ts_datardy_irq,
+				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				     "TSIRDY", tsi);
+	if (error) {
+		dev_err(tsi->da9052->dev,
+			"Failed to register TSIRDY IRQ %d, error = %d\n",
+			tsi->irq_datardy, error);
+		goto err_free_pendwn_irq;
+	}
+
+	/* Mask PEN_DOWN and TSI_READY events */
+	disable_irq(tsi->irq_pendwn);
+	disable_irq(tsi->irq_datardy);
+
+	error = da9052_configure_tsi(tsi);
+	if (error)
+		goto err_free_datardy_irq;
+
+	error = input_register_device(tsi->dev);
+	if (error)
+		goto err_free_datardy_irq;
+
+	platform_set_drvdata(pdev, tsi);
+
+	return 0;
+
+err_free_datardy_irq:
+	free_irq(tsi->irq_datardy, tsi);
+err_free_pendwn_irq:
+	free_irq(tsi->irq_pendwn, tsi);
+err_free_mem:
+	kfree(tsi);
+	input_free_device(input_dev);
+
+	return error;
+}
+
+static int  __devexit da9052_ts_remove(struct platform_device *pdev)
+{
+	struct da9052_tsi *tsi = platform_get_drvdata(pdev);
+
+	da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x19);
+
+	free_irq(tsi->irq_pendwn, tsi);
+	free_irq(tsi->irq_datardy, tsi);
+
+	input_unregister_device(tsi->dev);
+	kfree(tsi);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver da9052_tsi_driver = {
+	.probe	= da9052_ts_probe,
+	.remove	= __devexit_p(da9052_ts_remove),
+	.driver	= {
+		.name	= "da9052-tsi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(da9052_tsi_driver);
+
+MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9052");
+MODULE_AUTHOR("Anthony Olech <Anthony.Olech@diasemi.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-tsi");
diff --git a/drivers/input/touchscreen/dynapro.c b/drivers/input/touchscreen/dynapro.c
index 4553539..1809677 100644
--- a/drivers/input/touchscreen/dynapro.c
+++ b/drivers/input/touchscreen/dynapro.c
@@ -188,19 +188,4 @@ static struct serio_driver dynapro_drv = {
 	.disconnect	= dynapro_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init dynapro_init(void)
-{
-	return serio_register_driver(&dynapro_drv);
-}
-
-static void __exit dynapro_exit(void)
-{
-	serio_unregister_driver(&dynapro_drv);
-}
-
-module_init(dynapro_init);
-module_exit(dynapro_exit);
+module_serio_driver(dynapro_drv);
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index 486d31b..957423d 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -405,19 +405,4 @@ static struct serio_driver elo_drv = {
 	.disconnect	= elo_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init elo_init(void)
-{
-	return serio_register_driver(&elo_drv);
-}
-
-static void __exit elo_exit(void)
-{
-	serio_unregister_driver(&elo_drv);
-}
-
-module_init(elo_init);
-module_exit(elo_exit);
+module_serio_driver(elo_drv);
diff --git a/drivers/input/touchscreen/fujitsu_ts.c b/drivers/input/touchscreen/fujitsu_ts.c
index 80b2180..10794dd 100644
--- a/drivers/input/touchscreen/fujitsu_ts.c
+++ b/drivers/input/touchscreen/fujitsu_ts.c
@@ -175,15 +175,4 @@ static struct serio_driver fujitsu_drv = {
 	.disconnect	= fujitsu_disconnect,
 };
 
-static int __init fujitsu_init(void)
-{
-	return serio_register_driver(&fujitsu_drv);
-}
-
-static void __exit fujitsu_exit(void)
-{
-	serio_unregister_driver(&fujitsu_drv);
-}
-
-module_init(fujitsu_init);
-module_exit(fujitsu_exit);
+module_serio_driver(fujitsu_drv);
diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c
index a54f90e0..41c7176 100644
--- a/drivers/input/touchscreen/gunze.c
+++ b/drivers/input/touchscreen/gunze.c
@@ -186,19 +186,4 @@ static struct serio_driver gunze_drv = {
 	.disconnect	= gunze_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init gunze_init(void)
-{
-	return serio_register_driver(&gunze_drv);
-}
-
-static void __exit gunze_exit(void)
-{
-	serio_unregister_driver(&gunze_drv);
-}
-
-module_init(gunze_init);
-module_exit(gunze_exit);
+module_serio_driver(gunze_drv);
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index 6107e56..b9e8686 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -476,19 +476,4 @@ static struct serio_driver h3600ts_drv = {
 	.disconnect	= h3600ts_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init h3600ts_init(void)
-{
-	return serio_register_driver(&h3600ts_drv);
-}
-
-static void __exit h3600ts_exit(void)
-{
-	serio_unregister_driver(&h3600ts_drv);
-}
-
-module_init(h3600ts_init);
-module_exit(h3600ts_exit);
+module_serio_driver(h3600ts_drv);
diff --git a/drivers/input/touchscreen/hampshire.c b/drivers/input/touchscreen/hampshire.c
index 2da6cc3..0cc47ea 100644
--- a/drivers/input/touchscreen/hampshire.c
+++ b/drivers/input/touchscreen/hampshire.c
@@ -187,19 +187,4 @@ static struct serio_driver hampshire_drv = {
 	.disconnect	= hampshire_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init hampshire_init(void)
-{
-	return serio_register_driver(&hampshire_drv);
-}
-
-static void __exit hampshire_exit(void)
-{
-	serio_unregister_driver(&hampshire_drv);
-}
-
-module_init(hampshire_init);
-module_exit(hampshire_exit);
+module_serio_driver(hampshire_drv);
diff --git a/drivers/input/touchscreen/inexio.c b/drivers/input/touchscreen/inexio.c
index 192ade0..a29c99c 100644
--- a/drivers/input/touchscreen/inexio.c
+++ b/drivers/input/touchscreen/inexio.c
@@ -189,19 +189,4 @@ static struct serio_driver inexio_drv = {
 	.disconnect	= inexio_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init inexio_init(void)
-{
-	return serio_register_driver(&inexio_drv);
-}
-
-static void __exit inexio_exit(void)
-{
-	serio_unregister_driver(&inexio_drv);
-}
-
-module_init(inexio_init);
-module_exit(inexio_exit);
+module_serio_driver(inexio_drv);
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index c3848ad..d9be6ea 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -22,6 +22,7 @@
 
 #include <mach/hardware.h>
 #include <mach/jornada720.h>
+#include <mach/irqs.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c
index afcd069..4c2b8ed 100644
--- a/drivers/input/touchscreen/lpc32xx_ts.c
+++ b/drivers/input/touchscreen/lpc32xx_ts.c
@@ -22,6 +22,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 /*
  * Touchscreen controller register offsets
@@ -383,6 +384,14 @@ static const struct dev_pm_ops lpc32xx_ts_pm_ops = {
 #define LPC32XX_TS_PM_OPS NULL
 #endif
 
+#ifdef CONFIG_OF
+static struct of_device_id lpc32xx_tsc_of_match[] = {
+	{ .compatible = "nxp,lpc3220-tsc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_tsc_of_match);
+#endif
+
 static struct platform_driver lpc32xx_ts_driver = {
 	.probe		= lpc32xx_ts_probe,
 	.remove		= __devexit_p(lpc32xx_ts_remove),
@@ -390,6 +399,7 @@ static struct platform_driver lpc32xx_ts_driver = {
 		.name	= MOD_NAME,
 		.owner	= THIS_MODULE,
 		.pm	= LPC32XX_TS_PM_OPS,
+		.of_match_table = of_match_ptr(lpc32xx_tsc_of_match),
 	},
 };
 module_platform_driver(lpc32xx_ts_driver);
diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c
index ede0274..48dc5b0 100644
--- a/drivers/input/touchscreen/mc13783_ts.c
+++ b/drivers/input/touchscreen/mc13783_ts.c
@@ -39,6 +39,7 @@ struct mc13783_ts_priv {
 	struct delayed_work work;
 	struct workqueue_struct *workq;
 	unsigned int sample[4];
+	struct mc13xxx_ts_platform_data *touch;
 };
 
 static irqreturn_t mc13783_ts_handler(int irq, void *data)
@@ -125,7 +126,9 @@ static void mc13783_ts_work(struct work_struct *work)
 	unsigned int channel = 12;
 
 	if (mc13xxx_adc_do_conversion(priv->mc13xxx,
-				mode, channel, priv->sample) == 0)
+				mode, channel,
+				priv->touch->ato, priv->touch->atox,
+				priv->sample) == 0)
 		mc13783_ts_report_sample(priv);
 }
 
@@ -179,6 +182,12 @@ static int __init mc13783_ts_probe(struct platform_device *pdev)
 	INIT_DELAYED_WORK(&priv->work, mc13783_ts_work);
 	priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
 	priv->idev = idev;
+	priv->touch = dev_get_platdata(&pdev->dev);
+	if (!priv->touch) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
 
 	/*
 	 * We need separate workqueue because mc13783_adc_do_conversion
diff --git a/drivers/input/touchscreen/mtouch.c b/drivers/input/touchscreen/mtouch.c
index 9077228..eb66b7c 100644
--- a/drivers/input/touchscreen/mtouch.c
+++ b/drivers/input/touchscreen/mtouch.c
@@ -202,19 +202,4 @@ static struct serio_driver mtouch_drv = {
 	.disconnect	= mtouch_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init mtouch_init(void)
-{
-	return serio_register_driver(&mtouch_drv);
-}
-
-static void __exit mtouch_exit(void)
-{
-	serio_unregister_driver(&mtouch_drv);
-}
-
-module_init(mtouch_init);
-module_exit(mtouch_exit);
+module_serio_driver(mtouch_drv);
diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c
index 4c012fb..4ccde45 100644
--- a/drivers/input/touchscreen/penmount.c
+++ b/drivers/input/touchscreen/penmount.c
@@ -317,19 +317,4 @@ static struct serio_driver pm_drv = {
 	.disconnect	= pm_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init pm_init(void)
-{
-	return serio_register_driver(&pm_drv);
-}
-
-static void __exit pm_exit(void)
-{
-	serio_unregister_driver(&pm_drv);
-}
-
-module_init(pm_init);
-module_exit(pm_exit);
+module_serio_driver(pm_drv);
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index cbbf71b..6cb68a1 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -218,7 +218,7 @@ static int __devexit st1232_ts_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int st1232_ts_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -243,18 +243,25 @@ static int st1232_ts_resume(struct device *dev)
 	return 0;
 }
 
-static const struct dev_pm_ops st1232_ts_pm_ops = {
-	.suspend	= st1232_ts_suspend,
-	.resume		= st1232_ts_resume,
-};
 #endif
 
+static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops,
+			 st1232_ts_suspend, st1232_ts_resume);
+
 static const struct i2c_device_id st1232_ts_id[] = {
 	{ ST1232_TS_NAME, 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, st1232_ts_id);
 
+#ifdef CONFIG_OF
+static const struct of_device_id st1232_ts_dt_ids[] __devinitconst = {
+	{ .compatible = "sitronix,st1232", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids);
+#endif
+
 static struct i2c_driver st1232_ts_driver = {
 	.probe		= st1232_ts_probe,
 	.remove		= __devexit_p(st1232_ts_remove),
@@ -262,9 +269,8 @@ static struct i2c_driver st1232_ts_driver = {
 	.driver = {
 		.name	= ST1232_TS_NAME,
 		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
+		.of_match_table = of_match_ptr(st1232_ts_dt_ids),
 		.pm	= &st1232_ts_pm_ops,
-#endif
 	},
 };
 
diff --git a/drivers/input/touchscreen/touchit213.c b/drivers/input/touchscreen/touchit213.c
index d1297ba..5f29e5b 100644
--- a/drivers/input/touchscreen/touchit213.c
+++ b/drivers/input/touchscreen/touchit213.c
@@ -216,19 +216,4 @@ static struct serio_driver touchit213_drv = {
 	.disconnect	= touchit213_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init touchit213_init(void)
-{
-	return serio_register_driver(&touchit213_drv);
-}
-
-static void __exit touchit213_exit(void)
-{
-	serio_unregister_driver(&touchit213_drv);
-}
-
-module_init(touchit213_init);
-module_exit(touchit213_exit);
+module_serio_driver(touchit213_drv);
diff --git a/drivers/input/touchscreen/touchright.c b/drivers/input/touchscreen/touchright.c
index 3a5c142..8a2887d 100644
--- a/drivers/input/touchscreen/touchright.c
+++ b/drivers/input/touchscreen/touchright.c
@@ -176,19 +176,4 @@ static struct serio_driver tr_drv = {
 	.disconnect	= tr_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init tr_init(void)
-{
-	return serio_register_driver(&tr_drv);
-}
-
-static void __exit tr_exit(void)
-{
-	serio_unregister_driver(&tr_drv);
-}
-
-module_init(tr_init);
-module_exit(tr_exit);
+module_serio_driver(tr_drv);
diff --git a/drivers/input/touchscreen/touchwin.c b/drivers/input/touchscreen/touchwin.c
index 763a656..588cdcb 100644
--- a/drivers/input/touchscreen/touchwin.c
+++ b/drivers/input/touchscreen/touchwin.c
@@ -183,19 +183,4 @@ static struct serio_driver tw_drv = {
 	.disconnect	= tw_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init tw_init(void)
-{
-	return serio_register_driver(&tw_drv);
-}
-
-static void __exit tw_exit(void)
-{
-	serio_unregister_driver(&tw_drv);
-}
-
-module_init(tw_init);
-module_exit(tw_exit);
+module_serio_driver(tw_drv);
diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c
index 29d5ed4..63209aa 100644
--- a/drivers/input/touchscreen/tsc40.c
+++ b/drivers/input/touchscreen/tsc40.c
@@ -167,17 +167,7 @@ static struct serio_driver tsc_drv = {
 	.disconnect     = tsc_disconnect,
 };
 
-static int __init tsc_ser_init(void)
-{
-	return serio_register_driver(&tsc_drv);
-}
-module_init(tsc_ser_init);
-
-static void __exit tsc_exit(void)
-{
-	serio_unregister_driver(&tsc_drv);
-}
-module_exit(tsc_exit);
+module_serio_driver(tsc_drv);
 
 MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
new file mode 100644
index 0000000..3557257
--- /dev/null
+++ b/drivers/input/touchscreen/wacom_i2c.c
@@ -0,0 +1,282 @@
+/*
+ * Wacom Penabled Driver for I2C
+ *
+ * Copyright (c) 2011 Tatsunosuke Tobita, Wacom.
+ * <tobita.tatsunosuke@wacom.co.jp>
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version of 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/unaligned.h>
+
+#define WACOM_CMD_QUERY0	0x04
+#define WACOM_CMD_QUERY1	0x00
+#define WACOM_CMD_QUERY2	0x33
+#define WACOM_CMD_QUERY3	0x02
+#define WACOM_CMD_THROW0	0x05
+#define WACOM_CMD_THROW1	0x00
+#define WACOM_QUERY_SIZE	19
+#define WACOM_RETRY_CNT		100
+
+struct wacom_features {
+	int x_max;
+	int y_max;
+	int pressure_max;
+	char fw_version;
+};
+
+struct wacom_i2c {
+	struct i2c_client *client;
+	struct input_dev *input;
+	u8 data[WACOM_QUERY_SIZE];
+};
+
+static int wacom_query_device(struct i2c_client *client,
+			      struct wacom_features *features)
+{
+	int ret;
+	u8 cmd1[] = { WACOM_CMD_QUERY0, WACOM_CMD_QUERY1,
+			WACOM_CMD_QUERY2, WACOM_CMD_QUERY3 };
+	u8 cmd2[] = { WACOM_CMD_THROW0, WACOM_CMD_THROW1 };
+	u8 data[WACOM_QUERY_SIZE];
+	struct i2c_msg msgs[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = sizeof(cmd1),
+			.buf = cmd1,
+		},
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = sizeof(cmd2),
+			.buf = cmd2,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(data),
+			.buf = data,
+		},
+	};
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		return ret;
+	if (ret != ARRAY_SIZE(msgs))
+		return -EIO;
+
+	features->x_max = get_unaligned_le16(&data[3]);
+	features->y_max = get_unaligned_le16(&data[5]);
+	features->pressure_max = get_unaligned_le16(&data[11]);
+	features->fw_version = get_unaligned_le16(&data[13]);
+
+	dev_dbg(&client->dev,
+		"x_max:%d, y_max:%d, pressure:%d, fw:%d\n",
+		features->x_max, features->y_max,
+		features->pressure_max, features->fw_version);
+
+	return 0;
+}
+
+static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
+{
+	struct wacom_i2c *wac_i2c = dev_id;
+	struct input_dev *input = wac_i2c->input;
+	u8 *data = wac_i2c->data;
+	unsigned int x, y, pressure;
+	unsigned char tsw, f1, f2, ers;
+	int error;
+
+	error = i2c_master_recv(wac_i2c->client,
+				wac_i2c->data, sizeof(wac_i2c->data));
+	if (error < 0)
+		goto out;
+
+	tsw = data[3] & 0x01;
+	ers = data[3] & 0x04;
+	f1 = data[3] & 0x02;
+	f2 = data[3] & 0x10;
+	x = le16_to_cpup((__le16 *)&data[4]);
+	y = le16_to_cpup((__le16 *)&data[6]);
+	pressure = le16_to_cpup((__le16 *)&data[8]);
+
+	input_report_key(input, BTN_TOUCH, tsw || ers);
+	input_report_key(input, BTN_TOOL_PEN, tsw);
+	input_report_key(input, BTN_TOOL_RUBBER, ers);
+	input_report_key(input, BTN_STYLUS, f1);
+	input_report_key(input, BTN_STYLUS2, f2);
+	input_report_abs(input, ABS_X, x);
+	input_report_abs(input, ABS_Y, y);
+	input_report_abs(input, ABS_PRESSURE, pressure);
+	input_sync(input);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int wacom_i2c_open(struct input_dev *dev)
+{
+	struct wacom_i2c *wac_i2c = input_get_drvdata(dev);
+	struct i2c_client *client = wac_i2c->client;
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static void wacom_i2c_close(struct input_dev *dev)
+{
+	struct wacom_i2c *wac_i2c = input_get_drvdata(dev);
+	struct i2c_client *client = wac_i2c->client;
+
+	disable_irq(client->irq);
+}
+
+static int __devinit wacom_i2c_probe(struct i2c_client *client,
+				     const struct i2c_device_id *id)
+{
+	struct wacom_i2c *wac_i2c;
+	struct input_dev *input;
+	struct wacom_features features;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "i2c_check_functionality error\n");
+		return -EIO;
+	}
+
+	error = wacom_query_device(client, &features);
+	if (error)
+		return error;
+
+	wac_i2c = kzalloc(sizeof(*wac_i2c), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!wac_i2c || !input) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	wac_i2c->client = client;
+	wac_i2c->input = input;
+
+	input->name = "Wacom I2C Digitizer";
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = 0x56a;
+	input->id.version = features.fw_version;
+	input->dev.parent = &client->dev;
+	input->open = wacom_i2c_open;
+	input->close = wacom_i2c_close;
+
+	input->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+
+	__set_bit(BTN_TOOL_PEN, input->keybit);
+	__set_bit(BTN_TOOL_RUBBER, input->keybit);
+	__set_bit(BTN_STYLUS, input->keybit);
+	__set_bit(BTN_STYLUS2, input->keybit);
+	__set_bit(BTN_TOUCH, input->keybit);
+
+	input_set_abs_params(input, ABS_X, 0, features.x_max, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, features.y_max, 0, 0);
+	input_set_abs_params(input, ABS_PRESSURE,
+			     0, features.pressure_max, 0, 0);
+
+	input_set_drvdata(input, wac_i2c);
+
+	error = request_threaded_irq(client->irq, NULL, wacom_i2c_irq,
+				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				     "wacom_i2c", wac_i2c);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to enable IRQ, error: %d\n", error);
+		goto err_free_mem;
+	}
+
+	/* Disable the IRQ, we'll enable it in wac_i2c_open() */
+	disable_irq(client->irq);
+
+	error = input_register_device(wac_i2c->input);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to register input device, error: %d\n", error);
+		goto err_free_irq;
+	}
+
+	i2c_set_clientdata(client, wac_i2c);
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, wac_i2c);
+err_free_mem:
+	input_free_device(input);
+	kfree(wac_i2c);
+
+	return error;
+}
+
+static int __devexit wacom_i2c_remove(struct i2c_client *client)
+{
+	struct wacom_i2c *wac_i2c = i2c_get_clientdata(client);
+
+	free_irq(client->irq, wac_i2c);
+	input_unregister_device(wac_i2c->input);
+	kfree(wac_i2c);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int wacom_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	disable_irq(client->irq);
+
+	return 0;
+}
+
+static int wacom_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(wacom_i2c_pm, wacom_i2c_suspend, wacom_i2c_resume);
+
+static const struct i2c_device_id wacom_i2c_id[] = {
+	{ "WAC_I2C_EMR", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, wacom_i2c_id);
+
+static struct i2c_driver wacom_i2c_driver = {
+	.driver	= {
+		.name	= "wacom_i2c",
+		.owner	= THIS_MODULE,
+		.pm	= &wacom_i2c_pm,
+	},
+
+	.probe		= wacom_i2c_probe,
+	.remove		= __devexit_p(wacom_i2c_remove),
+	.id_table	= wacom_i2c_id,
+};
+module_i2c_driver(wacom_i2c_driver);
+
+MODULE_AUTHOR("Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp>");
+MODULE_DESCRIPTION("WACOM EMR I2C Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 1569a39..8f9ad2f 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -594,15 +594,4 @@ static struct serio_driver w8001_drv = {
 	.disconnect	= w8001_disconnect,
 };
 
-static int __init w8001_init(void)
-{
-	return serio_register_driver(&w8001_drv);
-}
-
-static void __exit w8001_exit(void)
-{
-	serio_unregister_driver(&w8001_drv);
-}
-
-module_init(w8001_init);
-module_exit(w8001_exit);
+module_serio_driver(w8001_drv);