Merge branch 'bfin_rotary' into next

Merge bfin_rotary driver changes from Sonic Zhang.

5 files changed, 200 insertions, 94 deletions

diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c
index 3f43515..a0fc18f 100644
--- a/drivers/input/misc/bfin_rotary.c
+++ b/drivers/input/misc/bfin_rotary.c
@@ -7,29 +7,37 @@
 
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/slab.h>
+#include <linux/platform_data/bfin_rotary.h>
 
 #include <asm/portmux.h>
-#include <asm/bfin_rotary.h>
 
-static const u16 per_cnt[] = {
-	P_CNT_CUD,
-	P_CNT_CDG,
-	P_CNT_CZM,
-	0
-};
+#define CNT_CONFIG_OFF		0	/* CNT Config Offset */
+#define CNT_IMASK_OFF		4	/* CNT Interrupt Mask Offset */
+#define CNT_STATUS_OFF		8	/* CNT Status Offset */
+#define CNT_COMMAND_OFF		12	/* CNT Command Offset */
+#define CNT_DEBOUNCE_OFF	16	/* CNT Debounce Offset */
+#define CNT_COUNTER_OFF		20	/* CNT Counter Offset */
+#define CNT_MAX_OFF		24	/* CNT Maximum Count Offset */
+#define CNT_MIN_OFF		28	/* CNT Minimum Count Offset */
 
 struct bfin_rot {
 	struct input_dev *input;
+	void __iomem *base;
 	int irq;
 	unsigned int up_key;
 	unsigned int down_key;
 	unsigned int button_key;
 	unsigned int rel_code;
+
+	unsigned short mode;
+	unsigned short debounce;
+
 	unsigned short cnt_config;
 	unsigned short cnt_imask;
 	unsigned short cnt_debounce;
@@ -59,18 +67,17 @@ static void report_rotary_event(struct bfin_rot *rotary, int delta)
 
 static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
 {
-	struct platform_device *pdev = dev_id;
-	struct bfin_rot *rotary = platform_get_drvdata(pdev);
+	struct bfin_rot *rotary = dev_id;
 	int delta;
 
-	switch (bfin_read_CNT_STATUS()) {
+	switch (readw(rotary->base + CNT_STATUS_OFF)) {
 
 	case ICII:
 		break;
 
 	case UCII:
 	case DCII:
-		delta = bfin_read_CNT_COUNTER();
+		delta = readl(rotary->base + CNT_COUNTER_OFF);
 		if (delta)
 			report_rotary_event(rotary, delta);
 		break;
@@ -83,16 +90,52 @@ static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
 		break;
 	}
 
-	bfin_write_CNT_COMMAND(W1LCNT_ZERO);	/* Clear COUNTER */
-	bfin_write_CNT_STATUS(-1);	/* Clear STATUS */
+	writew(W1LCNT_ZERO, rotary->base + CNT_COMMAND_OFF); /* Clear COUNTER */
+	writew(-1, rotary->base + CNT_STATUS_OFF); /* Clear STATUS */
 
 	return IRQ_HANDLED;
 }
 
+static int bfin_rotary_open(struct input_dev *input)
+{
+	struct bfin_rot *rotary = input_get_drvdata(input);
+	unsigned short val;
+
+	if (rotary->mode & ROT_DEBE)
+		writew(rotary->debounce & DPRESCALE,
+			rotary->base + CNT_DEBOUNCE_OFF);
+
+	writew(rotary->mode & ~CNTE, rotary->base + CNT_CONFIG_OFF);
+
+	val = UCIE | DCIE;
+	if (rotary->button_key)
+		val |= CZMIE;
+	writew(val, rotary->base + CNT_IMASK_OFF);
+
+	writew(rotary->mode | CNTE, rotary->base + CNT_CONFIG_OFF);
+
+	return 0;
+}
+
+static void bfin_rotary_close(struct input_dev *input)
+{
+	struct bfin_rot *rotary = input_get_drvdata(input);
+
+	writew(0, rotary->base + CNT_CONFIG_OFF);
+	writew(0, rotary->base + CNT_IMASK_OFF);
+}
+
+static void bfin_rotary_free_action(void *data)
+{
+	peripheral_free_list(data);
+}
+
 static int bfin_rotary_probe(struct platform_device *pdev)
 {
-	struct bfin_rotary_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct device *dev = &pdev->dev;
+	const struct bfin_rotary_platform_data *pdata = dev_get_platdata(dev);
 	struct bfin_rot *rotary;
+	struct resource *res;
 	struct input_dev *input;
 	int error;
 
@@ -102,18 +145,37 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	error = peripheral_request_list(per_cnt, dev_name(&pdev->dev));
-	if (error) {
-		dev_err(&pdev->dev, "requesting peripherals failed\n");
-		return error;
+	if (pdata->pin_list) {
+		error = peripheral_request_list(pdata->pin_list,
+						dev_name(&pdev->dev));
+		if (error) {
+			dev_err(dev, "requesting peripherals failed: %d\n",
+				error);
+			return error;
+		}
+
+		error = devm_add_action(dev, bfin_rotary_free_action,
+					pdata->pin_list);
+		if (error) {
+			dev_err(dev, "setting cleanup action failed: %d\n",
+				error);
+			peripheral_free_list(pdata->pin_list);
+			return error;
+		}
 	}
 
-	rotary = kzalloc(sizeof(struct bfin_rot), GFP_KERNEL);
-	input = input_allocate_device();
-	if (!rotary || !input) {
-		error = -ENOMEM;
-		goto out1;
-	}
+	rotary = devm_kzalloc(dev, sizeof(struct bfin_rot), GFP_KERNEL);
+	if (!rotary)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rotary->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(rotary->base))
+		return PTR_ERR(rotary->base);
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
 
 	rotary->input = input;
 
@@ -122,9 +184,8 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 	rotary->button_key = pdata->rotary_button_key;
 	rotary->rel_code = pdata->rotary_rel_code;
 
-	error = rotary->irq = platform_get_irq(pdev, 0);
-	if (error < 0)
-		goto out1;
+	rotary->mode = pdata->mode;
+	rotary->debounce = pdata->debounce;
 
 	input->name = pdev->name;
 	input->phys = "bfin-rotary/input0";
@@ -137,6 +198,9 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 	input->id.product = 0x0001;
 	input->id.version = 0x0100;
 
+	input->open = bfin_rotary_open;
+	input->close = bfin_rotary_close;
+
 	if (rotary->up_key) {
 		__set_bit(EV_KEY, input->evbit);
 		__set_bit(rotary->up_key, input->keybit);
@@ -151,75 +215,43 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 		__set_bit(rotary->button_key, input->keybit);
 	}
 
-	error = request_irq(rotary->irq, bfin_rotary_isr,
-			    0, dev_name(&pdev->dev), pdev);
+	/* Quiesce the device before requesting irq */
+	bfin_rotary_close(input);
+
+	rotary->irq = platform_get_irq(pdev, 0);
+	if (rotary->irq < 0) {
+		dev_err(dev, "No rotary IRQ specified\n");
+		return -ENOENT;
+	}
+
+	error = devm_request_irq(dev, rotary->irq, bfin_rotary_isr,
+				 0, dev_name(dev), rotary);
 	if (error) {
-		dev_err(&pdev->dev,
-			"unable to claim irq %d; error %d\n",
+		dev_err(dev, "unable to claim irq %d; error %d\n",
 			rotary->irq, error);
-		goto out1;
+		return error;
 	}
 
 	error = input_register_device(input);
 	if (error) {
-		dev_err(&pdev->dev,
-			"unable to register input device (%d)\n", error);
-		goto out2;
+		dev_err(dev, "unable to register input device (%d)\n", error);
+		return error;
 	}
 
-	if (pdata->rotary_button_key)
-		bfin_write_CNT_IMASK(CZMIE);
-
-	if (pdata->mode & ROT_DEBE)
-		bfin_write_CNT_DEBOUNCE(pdata->debounce & DPRESCALE);
-
-	if (pdata->mode)
-		bfin_write_CNT_CONFIG(bfin_read_CNT_CONFIG() |
-					(pdata->mode & ~CNTE));
-
-	bfin_write_CNT_IMASK(bfin_read_CNT_IMASK() | UCIE | DCIE);
-	bfin_write_CNT_CONFIG(bfin_read_CNT_CONFIG() | CNTE);
-
 	platform_set_drvdata(pdev, rotary);
 	device_init_wakeup(&pdev->dev, 1);
 
 	return 0;
-
-out2:
-	free_irq(rotary->irq, pdev);
-out1:
-	input_free_device(input);
-	kfree(rotary);
-	peripheral_free_list(per_cnt);
-
-	return error;
 }
 
-static int bfin_rotary_remove(struct platform_device *pdev)
-{
-	struct bfin_rot *rotary = platform_get_drvdata(pdev);
-
-	bfin_write_CNT_CONFIG(0);
-	bfin_write_CNT_IMASK(0);
-
-	free_irq(rotary->irq, pdev);
-	input_unregister_device(rotary->input);
-	peripheral_free_list(per_cnt);
-
-	kfree(rotary);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int bfin_rotary_suspend(struct device *dev)
+static int __maybe_unused bfin_rotary_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct bfin_rot *rotary = platform_get_drvdata(pdev);
 
-	rotary->cnt_config = bfin_read_CNT_CONFIG();
-	rotary->cnt_imask = bfin_read_CNT_IMASK();
-	rotary->cnt_debounce = bfin_read_CNT_DEBOUNCE();
+	rotary->cnt_config = readw(rotary->base + CNT_CONFIG_OFF);
+	rotary->cnt_imask = readw(rotary->base + CNT_IMASK_OFF);
+	rotary->cnt_debounce = readw(rotary->base + CNT_DEBOUNCE_OFF);
 
 	if (device_may_wakeup(&pdev->dev))
 		enable_irq_wake(rotary->irq);
@@ -227,38 +259,32 @@ static int bfin_rotary_suspend(struct device *dev)
 	return 0;
 }
 
-static int bfin_rotary_resume(struct device *dev)
+static int __maybe_unused bfin_rotary_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct bfin_rot *rotary = platform_get_drvdata(pdev);
 
-	bfin_write_CNT_DEBOUNCE(rotary->cnt_debounce);
-	bfin_write_CNT_IMASK(rotary->cnt_imask);
-	bfin_write_CNT_CONFIG(rotary->cnt_config & ~CNTE);
+	writew(rotary->cnt_debounce, rotary->base + CNT_DEBOUNCE_OFF);
+	writew(rotary->cnt_imask, rotary->base + CNT_IMASK_OFF);
+	writew(rotary->cnt_config & ~CNTE, rotary->base + CNT_CONFIG_OFF);
 
 	if (device_may_wakeup(&pdev->dev))
 		disable_irq_wake(rotary->irq);
 
 	if (rotary->cnt_config & CNTE)
-		bfin_write_CNT_CONFIG(rotary->cnt_config);
+		writew(rotary->cnt_config, rotary->base + CNT_CONFIG_OFF);
 
 	return 0;
 }
 
-static const struct dev_pm_ops bfin_rotary_pm_ops = {
-	.suspend	= bfin_rotary_suspend,
-	.resume		= bfin_rotary_resume,
-};
-#endif
+static SIMPLE_DEV_PM_OPS(bfin_rotary_pm_ops,
+			 bfin_rotary_suspend, bfin_rotary_resume);
 
 static struct platform_driver bfin_rotary_device_driver = {
 	.probe		= bfin_rotary_probe,
-	.remove		= bfin_rotary_remove,
 	.driver		= {
 		.name	= "bfin-rotary",
-#ifdef CONFIG_PM
 		.pm	= &bfin_rotary_pm_ops,
-#endif
 	},
 };
 module_platform_driver(bfin_rotary_device_driver);
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index f2b9780..6e22682 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1097,6 +1097,8 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse,
  * Asus UX31               0x361f00        20, 15, 0e      clickpad
  * Asus UX32VD             0x361f02        00, 15, 0e      clickpad
  * Avatar AVIU-145A2       0x361f00        ?               clickpad
+ * Fujitsu LIFEBOOK E544   0x470f00        d0, 12, 09      2 hw buttons
+ * Fujitsu LIFEBOOK E554   0x570f01        40, 14, 0c      2 hw buttons
  * Fujitsu H730            0x570f00        c0, 14, 0c      3 hw buttons (**)
  * Gigabyte U2442          0x450f01        58, 17, 0c      2 hw buttons
  * Lenovo L430             0x350f02        b9, 15, 0c      2 hw buttons (*)
@@ -1475,6 +1477,20 @@ static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
 		},
 	},
+	{
+		/* Fujitsu LIFEBOOK E554  does not work with crc_enabled == 0 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E554"),
+		},
+	},
+	{
+		/* Fujitsu LIFEBOOK E544  does not work with crc_enabled == 0 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E544"),
+		},
+	},
 #endif
 	{ }
 };
@@ -1520,6 +1536,8 @@ static int elantech_set_properties(struct elantech_data *etd)
 		case 7:
 		case 8:
 		case 9:
+		case 10:
+		case 13:
 			etd->hw_version = 4;
 			break;
 		default:
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index bee0387..7e705ee 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -138,8 +138,9 @@ static const struct min_max_quirk min_max_pnpid_table[] = {
 		1232, 5710, 1156, 4696
 	},
 	{
-		(const char * const []){"LEN0034", "LEN0036", "LEN0039",
-					"LEN2002", "LEN2004", NULL},
+		(const char * const []){"LEN0034", "LEN0036", "LEN0037",
+					"LEN0039", "LEN2002", "LEN2004",
+					NULL},
 		1024, 5112, 2024, 4832
 	},
 	{
@@ -168,7 +169,7 @@ static const char * const topbuttonpad_pnp_ids[] = {
 	"LEN0034", /* T431s, L440, L540, T540, W540, X1 Carbon 2nd */
 	"LEN0035", /* X240 */
 	"LEN0036", /* T440 */
-	"LEN0037",
+	"LEN0037", /* X1 Carbon 2nd */
 	"LEN0038",
 	"LEN0039", /* T440s */
 	"LEN0041",
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index c66d1b5..c115565 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -152,6 +152,14 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
+		/* Medion Akoya E7225 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Medion"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Akoya E7225"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
+		},
+	},
+	{
 		/* Blue FB5601 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "blue"),
@@ -415,6 +423,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 		},
 	},
 	{
+		/* Acer Aspire 7738 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7738"),
+		},
+	},
+	{
 		/* Gericom Bellagio */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Gericom"),
@@ -745,6 +760,35 @@ static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = {
 	{ }
 };
 
+/*
+ * Some laptops need keyboard reset before probing for the trackpad to get
+ * it detected, initialised & finally work.
+ */
+static const struct dmi_system_id __initconst i8042_dmi_kbdreset_table[] = {
+	{
+		/* Gigabyte P35 v2 - Elantech touchpad */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "P35V2"),
+		},
+	},
+		{
+		/* Aorus branded Gigabyte X3 Plus - Elantech touchpad */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X3"),
+		},
+	},
+	{
+		/* Gigabyte P34 - Elantech touchpad */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "P34"),
+		},
+	},
+	{ }
+};
+
 #endif /* CONFIG_X86 */
 
 #ifdef CONFIG_PNP
@@ -1040,6 +1084,9 @@ static int __init i8042_platform_init(void)
 	if (dmi_check_system(i8042_dmi_dritek_table))
 		i8042_dritek = true;
 
+	if (dmi_check_system(i8042_dmi_kbdreset_table))
+		i8042_kbdreset = true;
+
 	/*
 	 * A20 was already enabled during early kernel init. But some buggy
 	 * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 924e4bf..986a71c 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -67,6 +67,10 @@ static bool i8042_notimeout;
 module_param_named(notimeout, i8042_notimeout, bool, 0);
 MODULE_PARM_DESC(notimeout, "Ignore timeouts signalled by i8042");
 
+static bool i8042_kbdreset;
+module_param_named(kbdreset, i8042_kbdreset, bool, 0);
+MODULE_PARM_DESC(kbdreset, "Reset device connected to KBD port");
+
 #ifdef CONFIG_X86
 static bool i8042_dritek;
 module_param_named(dritek, i8042_dritek, bool, 0);
@@ -790,6 +794,16 @@ static int __init i8042_check_aux(void)
 		return -1;
 
 /*
+ * Reset keyboard (needed on some laptops to successfully detect
+ * touchpad, e.g., some Gigabyte laptop models with Elantech
+ * touchpads).
+ */
+	if (i8042_kbdreset) {
+		pr_warn("Attempting to reset device connected to KBD port\n");
+		i8042_kbd_write(NULL, (unsigned char) 0xff);
+	}
+
+/*
  * Test AUX IRQ delivery to make sure BIOS did not grab the IRQ and
  * used it for a PCI card or somethig else.
  */