Merge tag 'v3.9-rc3' into next

Merge with mainline to bring in module_platform_driver_probe() and
devm_ioremap_resource().

39 files changed, 993 insertions, 631 deletions

diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index 53eaf89f..71db193 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -252,7 +252,7 @@ void input_mt_sync_frame(struct input_dev *dev)
 
 	if (mt->flags & INPUT_MT_DROP_UNUSED) {
 		for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
-			if (s->frame == mt->frame)
+			if (input_mt_is_used(mt, s))
 				continue;
 			input_mt_slot(dev, s - mt->slots);
 			input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1);
diff --git a/drivers/input/input.c b/drivers/input/input.c
index ce01332f..c044699 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1785,12 +1785,13 @@ static void devm_input_device_release(struct device *dev, void *res)
  * its driver (or binding fails). Once managed input device is allocated,
  * it is ready to be set up and registered in the same fashion as regular
  * input device. There are no special devm_input_device_[un]register()
- * variants, regular ones work with both managed and unmanaged devices.
+ * variants, regular ones work with both managed and unmanaged devices,
+ * should you need them. In most cases however, managed input device need
+ * not be explicitly unregistered or freed.
  *
  * NOTE: the owner device is set up as parent of input device and users
  * should not override it.
  */
-
 struct input_dev *devm_input_allocate_device(struct device *dev)
 {
 	struct input_dev *input;
@@ -2004,6 +2005,17 @@ static void devm_input_device_unregister(struct device *dev, void *res)
  * Once device has been successfully registered it can be unregistered
  * with input_unregister_device(); input_free_device() should not be
  * called in this case.
+ *
+ * Note that this function is also used to register managed input devices
+ * (ones allocated with devm_input_allocate_device()). Such managed input
+ * devices need not be explicitly unregistered or freed, their tear down
+ * is controlled by the devres infrastructure. It is also worth noting
+ * that tear down of managed input devices is internally a 2-step process:
+ * registered managed input device is first unregistered, but stays in
+ * memory and can still handle input_event() calls (although events will
+ * not be delivered anywhere). The freeing of managed input device will
+ * happen later, when devres stack is unwound to the point where device
+ * allocation was made.
  */
 int input_register_device(struct input_dev *dev)
 {
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index 358cd7e..7cd74e2 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -162,7 +162,7 @@ static unsigned int get_time_pit(void)
 #define GET_TIME(x)	do { x = get_cycles(); } while (0)
 #define DELTA(x,y)	((y)-(x))
 #define TIME_NAME	"PCC"
-#elif defined(CONFIG_MN10300)
+#elif defined(CONFIG_MN10300) || defined(CONFIG_TILE)
 #define GET_TIME(x)	do { x = get_cycles(); } while (0)
 #define DELTA(x, y)	((x) - (y))
 #define TIME_NAME	"TSC"
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 83811e4..d6cbfe9 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -118,11 +118,12 @@ static const struct xpad_device {
 	u8 xtype;
 } xpad_device[] = {
 	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
-	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
+	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
+	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
+	{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
-	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
 	{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
@@ -136,9 +137,12 @@ static const struct xpad_device {
 	{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
 	{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", XTYPE_XBOX360 },
 	{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
 	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
+	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
 	{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
 	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
@@ -148,24 +152,28 @@ static const struct xpad_device {
 	{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
 	{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
 	{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
-	{ 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
 	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
+	{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
 	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
-	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
-	{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
 	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
-	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
+	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
-	{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
-	{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
-	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
 };
@@ -235,7 +243,7 @@ static const signed short xpad_abs_triggers[] = {
 	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
 	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
 
-static struct usb_device_id xpad_table [] = {
+static struct usb_device_id xpad_table[] = {
 	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
 	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech X-Box 360 style controllers */
@@ -248,10 +256,11 @@ static struct usb_device_id xpad_table [] = {
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Harminix Rock Band Guitar and Drums */
 	XPAD_XBOX360_VENDOR(0x0f0d),		/* Hori Controllers */
 	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
+	XPAD_XBOX360_VENDOR(0x24c6),		/* PowerA Controllers */
 	{ }
 };
 
-MODULE_DEVICE_TABLE (usb, xpad_table);
+MODULE_DEVICE_TABLE(usb, xpad_table);
 
 struct usb_xpad {
 	struct input_dev *dev;		/* input device interface */
@@ -783,7 +792,7 @@ static int xpad_open(struct input_dev *dev)
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
 	/* URB was submitted in probe */
-	if(xpad->xtype == XTYPE_XBOX360W)
+	if (xpad->xtype == XTYPE_XBOX360W)
 		return 0;
 
 	xpad->irq_in->dev = xpad->udev;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 992137c..ac05006 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -409,7 +409,7 @@ config KEYBOARD_NEWTON
 
 config KEYBOARD_NOMADIK
 	tristate "ST-Ericsson Nomadik SKE keyboard"
-	depends on PLAT_NOMADIK
+	depends on (ARCH_NOMADIK || ARCH_U8500)
 	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use a keypad provided on the SKE controller
@@ -554,6 +554,7 @@ config KEYBOARD_OMAP
 
 config KEYBOARD_OMAP4
 	tristate "TI OMAP4+ keypad support"
+	depends on ARCH_OMAP2PLUS
 	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the OMAP4+ keypad.
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index d327f5a..b29ca65 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -602,6 +602,7 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 
 	i = 0;
 	for_each_child_of_node(node, pp) {
+		int gpio;
 		enum of_gpio_flags flags;
 
 		if (!of_find_property(pp, "gpios", NULL)) {
@@ -610,9 +611,19 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 			continue;
 		}
 
+		gpio = of_get_gpio_flags(pp, 0, &flags);
+		if (gpio < 0) {
+			error = gpio;
+			if (error != -EPROBE_DEFER)
+				dev_err(dev,
+					"Failed to get gpio flags, error: %d\n",
+					error);
+			goto err_free_pdata;
+		}
+
 		button = &pdata->buttons[i++];
 
-		button->gpio = of_get_gpio_flags(pp, 0, &flags);
+		button->gpio = gpio;
 		button->active_low = flags & OF_GPIO_ACTIVE_LOW;
 
 		if (of_property_read_u32(pp, "linux,code", &button->code)) {
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index f686fd9..2114716 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -135,6 +135,7 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
 
 	i = 0;
 	for_each_child_of_node(node, pp) {
+		int gpio;
 		enum of_gpio_flags flags;
 
 		if (!of_find_property(pp, "gpios", NULL)) {
@@ -143,9 +144,19 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
 			continue;
 		}
 
+		gpio = of_get_gpio_flags(pp, 0, &flags);
+		if (gpio < 0) {
+			error = gpio;
+			if (error != -EPROBE_DEFER)
+				dev_err(dev,
+					"Failed to get gpio flags, error: %d\n",
+					error);
+			goto err_free_pdata;
+		}
+
 		button = &pdata->buttons[i++];
 
-		button->gpio = of_get_gpio_flags(pp, 0, &flags);
+		button->gpio = gpio;
 		button->active_low = flags & OF_GPIO_ACTIVE_LOW;
 
 		if (of_property_read_u32(pp, "linux,code", &button->code)) {
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index 93c8126..0de23f4 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -398,7 +398,7 @@ static irqreturn_t lm8323_irq(int irq, void *_lm)
 			lm8323_configure(lm);
 		}
 		for (i = 0; i < LM8323_NUM_PWMS; i++) {
-			if (ints & (1 << (INT_PWM1 + i))) {
+			if (ints & (INT_PWM1 << i)) {
 				dev_vdbg(&lm->client->dev,
 					 "pwm%d engine completed\n", i);
 				pwm_done(&lm->pwm[i]);
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index f4ff0dd..71d7719 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -403,7 +403,7 @@ matrix_keypad_parse_dt(struct device *dev)
 	struct matrix_keypad_platform_data *pdata;
 	struct device_node *np = dev->of_node;
 	unsigned int *gpios;
-	int i;
+	int i, nrow, ncol;
 
 	if (!np) {
 		dev_err(dev, "device lacks DT data\n");
@@ -416,9 +416,9 @@ matrix_keypad_parse_dt(struct device *dev)
 		return ERR_PTR(-ENOMEM);
 	}
 
-	pdata->num_row_gpios = of_gpio_named_count(np, "row-gpios");
-	pdata->num_col_gpios = of_gpio_named_count(np, "col-gpios");
-	if (!pdata->num_row_gpios || !pdata->num_col_gpios) {
+	pdata->num_row_gpios = nrow = of_gpio_named_count(np, "row-gpios");
+	pdata->num_col_gpios = ncol = of_gpio_named_count(np, "col-gpios");
+	if (nrow <= 0 || ncol <= 0) {
 		dev_err(dev, "number of keypad rows/columns not specified\n");
 		return ERR_PTR(-EINVAL);
 	}
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
index 695d237..cb1e8f6 100644
--- a/drivers/input/keyboard/spear-keyboard.c
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -228,11 +228,9 @@ static int spear_kbd_probe(struct platform_device *pdev)
 		kbd->suspended_rate = pdata->suspended_rate;
 	}
 
-	kbd->io_base = devm_request_and_ioremap(&pdev->dev, res);
-	if (!kbd->io_base) {
-		dev_err(&pdev->dev, "request-ioremap failed for kbd_region\n");
-		return -ENOMEM;
-	}
+	kbd->io_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kbd->io_base))
+		return PTR_ERR(kbd->io_base);
 
 	kbd->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(kbd->clk))
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
index 2fb0d76..208de7cb 100644
--- a/drivers/input/keyboard/tc3589x-keypad.c
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -70,8 +70,6 @@
 #define TC3589x_EVT_INT_CLR	0x2
 #define TC3589x_KBD_INT_CLR	0x1
 
-#define TC3589x_KBD_KEYMAP_SIZE     64
-
 /**
  * struct tc_keypad - data structure used by keypad driver
  * @tc3589x:    pointer to tc35893
@@ -88,7 +86,7 @@ struct tc_keypad {
 	const struct tc3589x_keypad_platform_data *board;
 	unsigned int krow;
 	unsigned int kcol;
-	unsigned short keymap[TC3589x_KBD_KEYMAP_SIZE];
+	unsigned short *keymap;
 	bool keypad_stopped;
 };
 
@@ -338,12 +336,14 @@ static int tc3589x_keypad_probe(struct platform_device *pdev)
 
 	error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
 					   TC3589x_MAX_KPROW, TC3589x_MAX_KPCOL,
-					   keypad->keymap, input);
+					   NULL, input);
 	if (error) {
 		dev_err(&pdev->dev, "Failed to build keymap\n");
 		goto err_free_mem;
 	}
 
+	keypad->keymap = input->keycode;
+
 	input_set_capability(input, EV_MSC, MSC_SCAN);
 	if (!plat->no_autorepeat)
 		__set_bit(EV_REP, input->evbit);
diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
index 50e9c5e..a34cc67 100644
--- a/drivers/input/keyboard/tca8418_keypad.c
+++ b/drivers/input/keyboard/tca8418_keypad.c
@@ -384,7 +384,7 @@ static const struct i2c_device_id tca8418_id[] = {
 MODULE_DEVICE_TABLE(i2c, tca8418_id);
 
 #ifdef CONFIG_OF
-static const struct of_device_id tca8418_dt_ids[] __devinitconst = {
+static const struct of_device_id tca8418_dt_ids[] = {
 	{ .compatible = "ti,tca8418", },
 	{ }
 };
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index d89e7d39..0e138eb 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -30,7 +30,7 @@
 #include <linux/clk.h>
 #include <linux/slab.h>
 #include <linux/input/matrix_keypad.h>
-#include <mach/clk.h>
+#include <linux/clk/tegra.h>
 
 #define KBC_MAX_GPIO	24
 #define KBC_MAX_KPENT	8
diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c
index 419cb6b..3ae496e 100644
--- a/drivers/input/matrix-keymap.c
+++ b/drivers/input/matrix-keymap.c
@@ -24,6 +24,7 @@
 #include <linux/input.h>
 #include <linux/of.h>
 #include <linux/export.h>
+#include <linux/module.h>
 #include <linux/input/matrix_keypad.h>
 
 static bool matrix_keypad_map_key(struct input_dev *input_dev,
@@ -182,3 +183,5 @@ int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
 	return 0;
 }
 EXPORT_SYMBOL(matrix_keypad_build_keymap);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 3ec8887..af80928 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -72,6 +72,16 @@ config INPUT_AD714X_SPI
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad714x-spi.
 
+config INPUT_ARIZONA_HAPTICS
+	tristate "Arizona haptics support"
+	depends on MFD_ARIZONA && SND_SOC
+	select INPUT_FF_MEMLESS
+	help
+	  Say Y to enable support for the haptics module in Arizona CODECs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called arizona-haptics.
+
 config INPUT_BMA150
 	tristate "BMA150/SMB380 acceleration sensor support"
 	depends on I2C
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index d687343..d7fc17f 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_INPUT_ADXL34X)		+= adxl34x.o
 obj-$(CONFIG_INPUT_ADXL34X_I2C)		+= adxl34x-i2c.o
 obj-$(CONFIG_INPUT_ADXL34X_SPI)		+= adxl34x-spi.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
+obj-$(CONFIG_INPUT_ARIZONA_HAPTICS)	+= arizona-haptics.o
 obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
 obj-$(CONFIG_INPUT_BFIN_ROTARY)		+= bfin_rotary.o
diff --git a/drivers/input/misc/arizona-haptics.c b/drivers/input/misc/arizona-haptics.c
new file mode 100644
index 0000000..7a04f54
--- /dev/null
+++ b/drivers/input/misc/arizona-haptics.c
@@ -0,0 +1,255 @@
+/*
+ * Arizona haptics driver
+ *
+ * Copyright 2012 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <linux/mfd/arizona/core.h>
+#include <linux/mfd/arizona/pdata.h>
+#include <linux/mfd/arizona/registers.h>
+
+struct arizona_haptics {
+	struct arizona *arizona;
+	struct input_dev *input_dev;
+	struct work_struct work;
+
+	struct mutex mutex;
+	u8 intensity;
+};
+
+static void arizona_haptics_work(struct work_struct *work)
+{
+	struct arizona_haptics *haptics = container_of(work,
+						       struct arizona_haptics,
+						       work);
+	struct arizona *arizona = haptics->arizona;
+	struct mutex *dapm_mutex = &arizona->dapm->card->dapm_mutex;
+	int ret;
+
+	if (!haptics->arizona->dapm) {
+		dev_err(arizona->dev, "No DAPM context\n");
+		return;
+	}
+
+	if (haptics->intensity) {
+		ret = regmap_update_bits(arizona->regmap,
+					 ARIZONA_HAPTICS_PHASE_2_INTENSITY,
+					 ARIZONA_PHASE2_INTENSITY_MASK,
+					 haptics->intensity);
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to set intensity: %d\n",
+				ret);
+			return;
+		}
+
+		/* This enable sequence will be a noop if already enabled */
+		ret = regmap_update_bits(arizona->regmap,
+					 ARIZONA_HAPTICS_CONTROL_1,
+					 ARIZONA_HAP_CTRL_MASK,
+					 1 << ARIZONA_HAP_CTRL_SHIFT);
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to start haptics: %d\n",
+				ret);
+			return;
+		}
+
+		mutex_lock_nested(dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
+
+		ret = snd_soc_dapm_enable_pin(arizona->dapm, "HAPTICS");
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to start HAPTICS: %d\n",
+				ret);
+			mutex_unlock(dapm_mutex);
+			return;
+		}
+
+		ret = snd_soc_dapm_sync(arizona->dapm);
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to sync DAPM: %d\n",
+				ret);
+			mutex_unlock(dapm_mutex);
+			return;
+		}
+
+		mutex_unlock(dapm_mutex);
+
+	} else {
+		/* This disable sequence will be a noop if already enabled */
+		mutex_lock_nested(dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
+
+		ret = snd_soc_dapm_disable_pin(arizona->dapm, "HAPTICS");
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to disable HAPTICS: %d\n",
+				ret);
+			mutex_unlock(dapm_mutex);
+			return;
+		}
+
+		ret = snd_soc_dapm_sync(arizona->dapm);
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to sync DAPM: %d\n",
+				ret);
+			mutex_unlock(dapm_mutex);
+			return;
+		}
+
+		mutex_unlock(dapm_mutex);
+
+		ret = regmap_update_bits(arizona->regmap,
+					 ARIZONA_HAPTICS_CONTROL_1,
+					 ARIZONA_HAP_CTRL_MASK,
+					 1 << ARIZONA_HAP_CTRL_SHIFT);
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to stop haptics: %d\n",
+				ret);
+			return;
+		}
+	}
+}
+
+static int arizona_haptics_play(struct input_dev *input, void *data,
+				struct ff_effect *effect)
+{
+	struct arizona_haptics *haptics = input_get_drvdata(input);
+	struct arizona *arizona = haptics->arizona;
+
+	if (!arizona->dapm) {
+		dev_err(arizona->dev, "No DAPM context\n");
+		return -EBUSY;
+	}
+
+	if (effect->u.rumble.strong_magnitude) {
+		/* Scale the magnitude into the range the device supports */
+		if (arizona->pdata.hap_act) {
+			haptics->intensity =
+				effect->u.rumble.strong_magnitude >> 9;
+			if (effect->direction < 0x8000)
+				haptics->intensity += 0x7f;
+		} else {
+			haptics->intensity =
+				effect->u.rumble.strong_magnitude >> 8;
+		}
+	} else {
+		haptics->intensity = 0;
+	}
+
+	schedule_work(&haptics->work);
+
+	return 0;
+}
+
+static void arizona_haptics_close(struct input_dev *input)
+{
+	struct arizona_haptics *haptics = input_get_drvdata(input);
+	struct mutex *dapm_mutex = &haptics->arizona->dapm->card->dapm_mutex;
+
+	cancel_work_sync(&haptics->work);
+
+	mutex_lock_nested(dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
+
+	if (haptics->arizona->dapm)
+		snd_soc_dapm_disable_pin(haptics->arizona->dapm, "HAPTICS");
+
+	mutex_unlock(dapm_mutex);
+}
+
+static int arizona_haptics_probe(struct platform_device *pdev)
+{
+	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+	struct arizona_haptics *haptics;
+	int ret;
+
+	haptics = devm_kzalloc(&pdev->dev, sizeof(*haptics), GFP_KERNEL);
+	if (!haptics)
+		return -ENOMEM;
+
+	haptics->arizona = arizona;
+
+	ret = regmap_update_bits(arizona->regmap, ARIZONA_HAPTICS_CONTROL_1,
+				 ARIZONA_HAP_ACT, arizona->pdata.hap_act);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to set haptics actuator: %d\n",
+			ret);
+		return ret;
+	}
+
+	INIT_WORK(&haptics->work, arizona_haptics_work);
+
+	haptics->input_dev = input_allocate_device();
+	if (haptics->input_dev == NULL) {
+		dev_err(arizona->dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	input_set_drvdata(haptics->input_dev, haptics);
+
+	haptics->input_dev->name = "arizona:haptics";
+	haptics->input_dev->dev.parent = pdev->dev.parent;
+	haptics->input_dev->close = arizona_haptics_close;
+	__set_bit(FF_RUMBLE, haptics->input_dev->ffbit);
+
+	ret = input_ff_create_memless(haptics->input_dev, NULL,
+				      arizona_haptics_play);
+	if (ret < 0) {
+		dev_err(arizona->dev, "input_ff_create_memless() failed: %d\n",
+			ret);
+		goto err_ialloc;
+	}
+
+	ret = input_register_device(haptics->input_dev);
+	if (ret < 0) {
+		dev_err(arizona->dev, "couldn't register input device: %d\n",
+			ret);
+		goto err_iff;
+	}
+
+	platform_set_drvdata(pdev, haptics);
+
+	return 0;
+
+err_iff:
+	if (haptics->input_dev)
+		input_ff_destroy(haptics->input_dev);
+err_ialloc:
+	input_free_device(haptics->input_dev);
+
+	return ret;
+}
+
+static int arizona_haptics_remove(struct platform_device *pdev)
+{
+	struct arizona_haptics *haptics = platform_get_drvdata(pdev);
+
+	input_unregister_device(haptics->input_dev);
+
+	return 0;
+}
+
+static struct platform_driver arizona_haptics_driver = {
+	.probe		= arizona_haptics_probe,
+	.remove		= arizona_haptics_remove,
+	.driver		= {
+		.name	= "arizona-haptics",
+		.owner	= THIS_MODULE,
+	},
+};
+module_platform_driver(arizona_haptics_driver);
+
+MODULE_ALIAS("platform:arizona-haptics");
+MODULE_DESCRIPTION("Arizona haptics driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
diff --git a/drivers/input/misc/atlas_btns.c b/drivers/input/misc/atlas_btns.c
index 26f1313..5d44023 100644
--- a/drivers/input/misc/atlas_btns.c
+++ b/drivers/input/misc/atlas_btns.c
@@ -121,7 +121,7 @@ static int atlas_acpi_button_add(struct acpi_device *device)
 	return err;
 }
 
-static int atlas_acpi_button_remove(struct acpi_device *device, int type)
+static int atlas_acpi_button_remove(struct acpi_device *device)
 {
 	acpi_status status;
 
diff --git a/drivers/input/misc/da9052_onkey.c b/drivers/input/misc/da9052_onkey.c
index 630c1ce..020569a 100644
--- a/drivers/input/misc/da9052_onkey.c
+++ b/drivers/input/misc/da9052_onkey.c
@@ -24,7 +24,6 @@ struct da9052_onkey {
 	struct da9052 *da9052;
 	struct input_dev *input;
 	struct delayed_work work;
-	unsigned int irq;
 };
 
 static void da9052_onkey_query(struct da9052_onkey *onkey)
@@ -76,7 +75,6 @@ static int da9052_onkey_probe(struct platform_device *pdev)
 	struct da9052 *da9052 = dev_get_drvdata(pdev->dev.parent);
 	struct da9052_onkey *onkey;
 	struct input_dev *input_dev;
-	int irq;
 	int error;
 
 	if (!da9052) {
@@ -84,13 +82,6 @@ static int da9052_onkey_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	irq = platform_get_irq_byname(pdev, "ONKEY");
-	if (irq < 0) {
-		dev_err(&pdev->dev,
-			"Failed to get an IRQ for input device, %d\n", irq);
-		return -EINVAL;
-	}
-
 	onkey = kzalloc(sizeof(*onkey), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!onkey || !input_dev) {
@@ -101,7 +92,6 @@ static int da9052_onkey_probe(struct platform_device *pdev)
 
 	onkey->input = input_dev;
 	onkey->da9052 = da9052;
-	onkey->irq = irq;
 	INIT_DELAYED_WORK(&onkey->work, da9052_onkey_work);
 
 	input_dev->name = "da9052-onkey";
@@ -111,13 +101,11 @@ static int da9052_onkey_probe(struct platform_device *pdev)
 	input_dev->evbit[0] = BIT_MASK(EV_KEY);
 	__set_bit(KEY_POWER, input_dev->keybit);
 
-	error = request_threaded_irq(onkey->irq, NULL, da9052_onkey_irq,
-				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-				     "ONKEY", onkey);
+	error = da9052_request_irq(onkey->da9052, DA9052_IRQ_NONKEY, "ONKEY",
+			    da9052_onkey_irq, onkey);
 	if (error < 0) {
 		dev_err(onkey->da9052->dev,
-			"Failed to register ONKEY IRQ %d, error = %d\n",
-			onkey->irq, error);
+			"Failed to register ONKEY IRQ: %d\n", error);
 		goto err_free_mem;
 	}
 
@@ -132,7 +120,7 @@ static int da9052_onkey_probe(struct platform_device *pdev)
 	return 0;
 
 err_free_irq:
-	free_irq(onkey->irq, onkey);
+	da9052_free_irq(onkey->da9052, DA9052_IRQ_NONKEY, onkey);
 	cancel_delayed_work_sync(&onkey->work);
 err_free_mem:
 	input_free_device(input_dev);
@@ -145,7 +133,7 @@ static int da9052_onkey_remove(struct platform_device *pdev)
 {
 	struct da9052_onkey *onkey = platform_get_drvdata(pdev);
 
-	free_irq(onkey->irq, onkey);
+	da9052_free_irq(onkey->da9052, DA9052_IRQ_NONKEY, onkey);
 	cancel_delayed_work_sync(&onkey->work);
 
 	input_unregister_device(onkey->input);
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index 0b4f542..2e3334b 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -109,7 +109,9 @@ static int hp_sdc_rtc_do_read_bbrtc (struct rtc_time *rtctm)
 	
 	if (hp_sdc_enqueue_transaction(&t)) return -1;
 	
-	down_interruptible(&tsem);  /* Put ourselves to sleep for results. */
+	/* Put ourselves to sleep for results. */
+	if (WARN_ON(down_interruptible(&tsem)))
+		return -1;
 	
 	/* Check for nonpresence of BBRTC */
 	if (!((tseq[83] | tseq[90] | tseq[69] | tseq[76] |
@@ -176,11 +178,16 @@ static int64_t hp_sdc_rtc_read_i8042timer (uint8_t loadcmd, int numreg)
 	t.seq =			tseq;
 	t.act.semaphore =	&i8042tregs;
 
-	down_interruptible(&i8042tregs);  /* Sleep if output regs in use. */
+	/* Sleep if output regs in use. */
+	if (WARN_ON(down_interruptible(&i8042tregs)))
+		return -1;
 
 	if (hp_sdc_enqueue_transaction(&t)) return -1;
 	
-	down_interruptible(&i8042tregs);  /* Sleep until results come back. */
+	/* Sleep until results come back. */
+	if (WARN_ON(down_interruptible(&i8042tregs)))
+		return -1;
+
 	up(&i8042tregs);
 
 	return (tseq[5] | 
@@ -276,6 +283,7 @@ static inline int hp_sdc_rtc_read_ct(struct timeval *res) {
 }
 
 
+#if 0 /* not used yet */
 /* Set the i8042 real-time clock */
 static int hp_sdc_rtc_set_rt (struct timeval *setto)
 {
@@ -386,6 +394,7 @@ static int hp_sdc_rtc_set_i8042timer (struct timeval *setto, uint8_t setcmd)
 	}
 	return 0;
 }
+#endif
 
 static ssize_t hp_sdc_rtc_read(struct file *file, char __user *buf,
 			       size_t count, loff_t *ppos) {
diff --git a/drivers/input/misc/max8925_onkey.c b/drivers/input/misc/max8925_onkey.c
index 369a39d..f9179b2 100644
--- a/drivers/input/misc/max8925_onkey.c
+++ b/drivers/input/misc/max8925_onkey.c
@@ -100,9 +100,6 @@ static int max8925_onkey_probe(struct platform_device *pdev)
 	input->dev.parent = &pdev->dev;
 	input_set_capability(input, EV_KEY, KEY_POWER);
 
-	irq[0] += chip->irq_base;
-	irq[1] += chip->irq_base;
-
 	error = request_threaded_irq(irq[0], NULL, max8925_onkey_handler,
 				     IRQF_ONESHOT, "onkey-down", info);
 	if (error < 0) {
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 7b99fc7..0238e0e 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -490,6 +490,29 @@ static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p)
 	f->y_map |= (p[5] & 0x20) << 6;
 }
 
+static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p)
+{
+	f->first_mp = !!(p[0] & 0x02);
+	f->is_mp = !!(p[0] & 0x20);
+
+	f->fingers = ((p[0] & 0x6) >> 1 |
+		     (p[0] & 0x10) >> 2);
+	f->x_map = ((p[2] & 0x60) >> 5) |
+		   ((p[4] & 0x7f) << 2) |
+		   ((p[5] & 0x7f) << 9) |
+		   ((p[3] & 0x07) << 16) |
+		   ((p[3] & 0x70) << 15) |
+		   ((p[0] & 0x01) << 22);
+	f->y_map = (p[1] & 0x7f) |
+		   ((p[2] & 0x1f) << 7);
+
+	f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
+	f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
+	f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
+
+	alps_decode_buttons_v3(f, p);
+}
+
 static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
@@ -874,7 +897,8 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
 	}
 
 	/* Bytes 2 - pktsize should have 0 in the highest bit */
-	if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
+	if (priv->proto_version != ALPS_PROTO_V5 &&
+	    psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
 	    (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
 		psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
 			    psmouse->pktcnt - 1,
@@ -994,8 +1018,7 @@ static int alps_rpt_cmd(struct psmouse *psmouse, int init_command,
 	return 0;
 }
 
-static int alps_enter_command_mode(struct psmouse *psmouse,
-				   unsigned char *resp)
+static int alps_enter_command_mode(struct psmouse *psmouse)
 {
 	unsigned char param[4];
 
@@ -1004,14 +1027,12 @@ static int alps_enter_command_mode(struct psmouse *psmouse,
 		return -1;
 	}
 
-	if (param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) {
+	if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) &&
+	    param[0] != 0x73) {
 		psmouse_dbg(psmouse,
 			    "unknown response while entering command mode\n");
 		return -1;
 	}
-
-	if (resp)
-		*resp = param[2];
 	return 0;
 }
 
@@ -1176,7 +1197,7 @@ static int alps_passthrough_mode_v3(struct psmouse *psmouse,
 {
 	int reg_val, ret = -1;
 
-	if (alps_enter_command_mode(psmouse, NULL))
+	if (alps_enter_command_mode(psmouse))
 		return -1;
 
 	reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008);
@@ -1216,7 +1237,7 @@ static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base)
 {
 	int ret = -EIO, reg_val;
 
-	if (alps_enter_command_mode(psmouse, NULL))
+	if (alps_enter_command_mode(psmouse))
 		goto error;
 
 	reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
@@ -1279,7 +1300,7 @@ static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
 		 * supported by this driver. If bit 1 isn't set the packet
 		 * format is different.
 		 */
-		if (alps_enter_command_mode(psmouse, NULL) ||
+		if (alps_enter_command_mode(psmouse) ||
 		    alps_command_mode_write_reg(psmouse,
 						reg_base + 0x08, 0x82) ||
 		    alps_exit_command_mode(psmouse))
@@ -1306,7 +1327,7 @@ static int alps_hw_init_v3(struct psmouse *psmouse)
 	    alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO)
 		goto error;
 
-	if (alps_enter_command_mode(psmouse, NULL) ||
+	if (alps_enter_command_mode(psmouse) ||
 	    alps_absolute_mode_v3(psmouse)) {
 		psmouse_err(psmouse, "Failed to enter absolute mode\n");
 		goto error;
@@ -1381,7 +1402,7 @@ static int alps_hw_init_rushmore_v3(struct psmouse *psmouse)
 			priv->flags &= ~ALPS_DUALPOINT;
 	}
 
-	if (alps_enter_command_mode(psmouse, NULL) ||
+	if (alps_enter_command_mode(psmouse) ||
 	    alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 ||
 	    alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00))
 		goto error;
@@ -1431,7 +1452,7 @@ static int alps_hw_init_v4(struct psmouse *psmouse)
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
 	unsigned char param[4];
 
-	if (alps_enter_command_mode(psmouse, NULL))
+	if (alps_enter_command_mode(psmouse))
 		goto error;
 
 	if (alps_absolute_mode_v4(psmouse)) {
@@ -1499,6 +1520,23 @@ error:
 	return -1;
 }
 
+static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	unsigned char param[2];
+
+	/* This is dolphin "v1" as empirically defined by florin9doi */
+	param[0] = 0x64;
+	param[1] = 0x28;
+
+	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
+	    ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
+	    ps2_command(ps2dev, &param[1], PSMOUSE_CMD_SETRATE))
+		return -1;
+
+	return 0;
+}
+
 static void alps_set_defaults(struct alps_data *priv)
 {
 	priv->byte0 = 0x8f;
@@ -1532,6 +1570,21 @@ static void alps_set_defaults(struct alps_data *priv)
 		priv->nibble_commands = alps_v4_nibble_commands;
 		priv->addr_command = PSMOUSE_CMD_DISABLE;
 		break;
+	case ALPS_PROTO_V5:
+		priv->hw_init = alps_hw_init_dolphin_v1;
+		priv->process_packet = alps_process_packet_v3;
+		priv->decode_fields = alps_decode_dolphin;
+		priv->set_abs_params = alps_set_abs_params_mt;
+		priv->nibble_commands = alps_v3_nibble_commands;
+		priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
+		priv->byte0 = 0xc8;
+		priv->mask0 = 0xc8;
+		priv->flags = 0;
+		priv->x_max = 1360;
+		priv->y_max = 660;
+		priv->x_bits = 23;
+		priv->y_bits = 12;
+		break;
 	}
 }
 
@@ -1592,6 +1645,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
 
 	if (alps_match_table(psmouse, priv, e7, ec) == 0) {
 		return 0;
+	} else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
+		   ec[0] == 0x73 && ec[1] == 0x01) {
+		priv->proto_version = ALPS_PROTO_V5;
+		alps_set_defaults(priv);
+
+		return 0;
 	} else if (ec[0] == 0x88 && ec[1] == 0x08) {
 		priv->proto_version = ALPS_PROTO_V3;
 		alps_set_defaults(priv);
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 9704805..eee5985 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -16,6 +16,7 @@
 #define ALPS_PROTO_V2	2
 #define ALPS_PROTO_V3	3
 #define ALPS_PROTO_V4	4
+#define ALPS_PROTO_V5	5
 
 /**
  * struct alps_model_info - touchpad ID table
diff --git a/drivers/input/mouse/cypress_ps2.c b/drivers/input/mouse/cypress_ps2.c
index 1673dc6..f51765f 100644
--- a/drivers/input/mouse/cypress_ps2.c
+++ b/drivers/input/mouse/cypress_ps2.c
@@ -236,6 +236,13 @@ static int cypress_read_fw_version(struct psmouse *psmouse)
 	cytp->fw_version = param[2] & FW_VERSION_MASX;
 	cytp->tp_metrics_supported = (param[2] & TP_METRICS_MASK) ? 1 : 0;
 
+	/*
+	 * Trackpad fw_version 11 (in Dell XPS12) yields a bogus response to
+	 * CYTP_CMD_READ_TP_METRICS so do not try to use it. LP: #1103594.
+	 */
+	if (cytp->fw_version >= 11)
+		cytp->tp_metrics_supported = 0;
+
 	psmouse_dbg(psmouse, "cytp->fw_version = %d\n", cytp->fw_version);
 	psmouse_dbg(psmouse, "cytp->tp_metrics_supported = %d\n",
 		 cytp->tp_metrics_supported);
@@ -258,6 +265,9 @@ static int cypress_read_tp_metrics(struct psmouse *psmouse)
 	cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width;
 	cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high;
 
+	if (!cytp->tp_metrics_supported)
+		return 0;
+
 	memset(param, 0, sizeof(param));
 	if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_TP_METRICS, param) == 0) {
 		/* Update trackpad parameters. */
@@ -315,18 +325,15 @@ static int cypress_read_tp_metrics(struct psmouse *psmouse)
 
 static int cypress_query_hardware(struct psmouse *psmouse)
 {
-	struct cytp_data *cytp = psmouse->private;
 	int ret;
 
 	ret = cypress_read_fw_version(psmouse);
 	if (ret)
 		return ret;
 
-	if (cytp->tp_metrics_supported) {
-		ret = cypress_read_tp_metrics(psmouse);
-		if (ret)
-			return ret;
-	}
+	ret = cypress_read_tp_metrics(psmouse);
+	if (ret)
+		return ret;
 
 	return 0;
 }
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index e582922..cc7e0d4 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -791,7 +791,7 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse)
 			fsp_set_slot(dev, 0, fgrs > 0, abs_x, abs_y);
 			fsp_set_slot(dev, 1, false, 0, 0);
 		}
-		if (fgrs > 0) {
+		if (fgrs == 1 || (fgrs == 2 && !(packet[0] & FSP_PB0_MFMC_FGR2))) {
 			input_report_abs(dev, ABS_X, abs_x);
 			input_report_abs(dev, ABS_Y, abs_y);
 		}
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index dbb1709..aebfe3e 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -22,7 +22,7 @@ config SERIO_I8042
 	tristate "i8042 PC Keyboard controller" if EXPERT || !X86
 	default y
 	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
-		   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN
+		   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN && !S390
 	help
 	  i8042 is the chip over which the standard AT keyboard and PS/2
 	  mouse are connected to the computer. If you use these devices,
@@ -36,6 +36,7 @@ config SERIO_I8042
 config SERIO_SERPORT
 	tristate "Serial port line discipline"
 	default y
+	depends on TTY
 	help
 	  Say Y here if you plan to use an input device (mouse, joystick,
 	  tablet, 6dof) that communicates over the RS232 serial (COM) port.
diff --git a/drivers/input/serio/arc_ps2.c b/drivers/input/serio/arc_ps2.c
index b571eb3..c52e3e5 100644
--- a/drivers/input/serio/arc_ps2.c
+++ b/drivers/input/serio/arc_ps2.c
@@ -8,6 +8,7 @@
  * Driver is originally developed by Pavel Sokolov <psokolov@synopsys.com>
  */
 
+#include <linux/err.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
@@ -206,9 +207,9 @@ static int arc_ps2_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	arc_ps2->addr = devm_request_and_ioremap(&pdev->dev, res);
-	if (!arc_ps2->addr)
-		return -EBUSY;
+	arc_ps2->addr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(arc_ps2->addr))
+		return PTR_ERR(arc_ps2->addr);
 
 	dev_info(&pdev->dev, "irq = %d, address = 0x%p, ports = %i\n",
 		 irq, arc_ps2->addr, ARC_PS2_PORTS);
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index d6cc77a..5f306f7 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -921,6 +921,7 @@ static int __init i8042_platform_init(void)
 	int retval;
 
 #ifdef CONFIG_X86
+	u8 a20_on = 0xdf;
 	/* Just return if pre-detection shows no i8042 controller exist */
 	if (!x86_platform.i8042_detect())
 		return -ENODEV;
@@ -960,6 +961,14 @@ static int __init i8042_platform_init(void)
 
 	if (dmi_check_system(i8042_dmi_dritek_table))
 		i8042_dritek = true;
+
+	/*
+	 * A20 was already enabled during early kernel init. But some buggy
+	 * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to
+	 * resume from S3. So we do it here and hope that nothing breaks.
+	 */
+	i8042_command(&a20_on, 0x10d1);
+	i8042_command(NULL, 0x00ff);	/* Null command for SMM firmware */
 #endif /* CONFIG_X86 */
 
 	return retval;
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index f92d34f..aaf23ae 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -553,10 +553,10 @@ static int wacom_set_device_mode(struct usb_interface *intf, int report_id, int
 	if (!rep_data)
 		return error;
 
-	rep_data[0] = report_id;
-	rep_data[1] = mode;
-
 	do {
+		rep_data[0] = report_id;
+		rep_data[1] = mode;
+
 		error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
 		                         report_id, rep_data, length, 1);
 		if (error >= 0)
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index ad11ec5..1daa979 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -2017,6 +2017,9 @@ static const struct wacom_features wacom_features_0x100 =
 static const struct wacom_features wacom_features_0x101 =
 	{ "Wacom ISDv4 101",      WACOM_PKGLEN_MTTPC,     26202, 16325,  255,
 	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x10D =
+	{ "Wacom ISDv4 10D",      WACOM_PKGLEN_MTTPC,     26202, 16325,  255,
+	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x4001 =
 	{ "Wacom ISDv4 4001",      WACOM_PKGLEN_MTTPC,     26202, 16325,  255,
 	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -2036,7 +2039,8 @@ static const struct wacom_features wacom_features_0xD1 =
 	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD2 =
 	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD3 =
 	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13700, 1023,
 	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
@@ -2200,6 +2204,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xEF) },
 	{ USB_DEVICE_WACOM(0x100) },
 	{ USB_DEVICE_WACOM(0x101) },
+	{ USB_DEVICE_WACOM(0x10D) },
 	{ USB_DEVICE_WACOM(0x4001) },
 	{ USB_DEVICE_WACOM(0x47) },
 	{ USB_DEVICE_WACOM(0xF4) },
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 9a647ee..f9a5fd8 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -517,9 +517,9 @@ config TOUCHSCREEN_TOUCHWIN
 	  To compile this driver as a module, choose M here: the
 	  module will be called touchwin.
 
-config TOUCHSCREEN_TI_TSCADC
+config TOUCHSCREEN_TI_AM335X_TSC
 	tristate "TI Touchscreen Interface"
-	depends on ARCH_OMAP2PLUS
+	depends on MFD_TI_AM335X_TSCADC
 	help
 	  Say Y here if you have 4/5/8 wire touchscreen controller
 	  to be connected to the ADC controller on your TI AM335x SoC.
@@ -527,7 +527,7 @@ config TOUCHSCREEN_TI_TSCADC
 	  If unsure, say N.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ti_tscadc.
+	  module will be called ti_am335x_tsc.
 
 config TOUCHSCREEN_ATMEL_TSADCC
 	tristate "Atmel Touchscreen Interface"
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 5f949c0..6bfbeab 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -51,7 +51,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR)	+= pixcir_i2c_ts.o
 obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ST1232)	+= st1232.o
 obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o
-obj-$(CONFIG_TOUCHSCREEN_TI_TSCADC)	+= ti_tscadc.o
+obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC)	+= ti_am335x_tsc.o
 obj-$(CONFIG_TOUCHSCREEN_TNETV107X)	+= tnetv107x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 4f702b3..434c3df 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -236,7 +236,12 @@ static void __ads7846_disable(struct ads7846 *ts)
 /* Must be called with ts->lock held */
 static void __ads7846_enable(struct ads7846 *ts)
 {
-	regulator_enable(ts->reg);
+	int error;
+
+	error = regulator_enable(ts->reg);
+	if (error != 0)
+		dev_err(&ts->spi->dev, "Failed to enable supply: %d\n", error);
+
 	ads7846_restart(ts);
 }
 
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index d04f810..59aa240 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -176,11 +176,17 @@
 /* Define for MXT_GEN_COMMAND_T6 */
 #define MXT_BOOT_VALUE		0xa5
 #define MXT_BACKUP_VALUE	0x55
-#define MXT_BACKUP_TIME		25	/* msec */
-#define MXT_RESET_TIME		65	/* msec */
+#define MXT_BACKUP_TIME		50	/* msec */
+#define MXT_RESET_TIME		200	/* msec */
 
 #define MXT_FWRESET_TIME	175	/* msec */
 
+/* MXT_SPT_GPIOPWM_T19 field */
+#define MXT_GPIO0_MASK		0x04
+#define MXT_GPIO1_MASK		0x08
+#define MXT_GPIO2_MASK		0x10
+#define MXT_GPIO3_MASK		0x20
+
 /* Command to unlock bootloader */
 #define MXT_UNLOCK_CMD_MSB	0xaa
 #define MXT_UNLOCK_CMD_LSB	0xdc
@@ -212,6 +218,8 @@
 /* Touchscreen absolute values */
 #define MXT_MAX_AREA		0xff
 
+#define MXT_PIXELS_PER_MM	20
+
 struct mxt_info {
 	u8 family_id;
 	u8 variant_id;
@@ -243,6 +251,8 @@ struct mxt_data {
 	const struct mxt_platform_data *pdata;
 	struct mxt_object *object_table;
 	struct mxt_info info;
+	bool is_tp;
+
 	unsigned int irq;
 	unsigned int max_x;
 	unsigned int max_y;
@@ -251,6 +261,7 @@ struct mxt_data {
 	u8 T6_reportid;
 	u8 T9_reportid_min;
 	u8 T9_reportid_max;
+	u8 T19_reportid;
 };
 
 static bool mxt_object_readable(unsigned int type)
@@ -502,6 +513,21 @@ static int mxt_write_object(struct mxt_data *data,
 	return mxt_write_reg(data->client, reg + offset, val);
 }
 
+static void mxt_input_button(struct mxt_data *data, struct mxt_message *message)
+{
+	struct input_dev *input = data->input_dev;
+	bool button;
+	int i;
+
+	/* Active-low switch */
+	for (i = 0; i < MXT_NUM_GPIO; i++) {
+		if (data->pdata->key_map[i] == KEY_RESERVED)
+			continue;
+		button = !(message->message[0] & MXT_GPIO0_MASK << i);
+		input_report_key(input, data->pdata->key_map[i], button);
+	}
+}
+
 static void mxt_input_touchevent(struct mxt_data *data,
 				      struct mxt_message *message, int id)
 {
@@ -585,6 +611,9 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 			int id = reportid - data->T9_reportid_min;
 			mxt_input_touchevent(data, &message, id);
 			update_input = true;
+		} else if (message.reportid == data->T19_reportid) {
+			mxt_input_button(data, &message);
+			update_input = true;
 		} else {
 			mxt_dump_message(dev, &message);
 		}
@@ -764,6 +793,9 @@ static int mxt_get_object_table(struct mxt_data *data)
 			data->T9_reportid_min = min_id;
 			data->T9_reportid_max = max_id;
 			break;
+		case MXT_SPT_GPIOPWM_T19:
+			data->T19_reportid = min_id;
+			break;
 		}
 	}
 
@@ -777,7 +809,7 @@ static void mxt_free_object_table(struct mxt_data *data)
 	data->T6_reportid = 0;
 	data->T9_reportid_min = 0;
 	data->T9_reportid_max = 0;
-
+	data->T19_reportid = 0;
 }
 
 static int mxt_initialize(struct mxt_data *data)
@@ -1115,9 +1147,13 @@ static int mxt_probe(struct i2c_client *client,
 		goto err_free_mem;
 	}
 
-	input_dev->name = "Atmel maXTouch Touchscreen";
+	data->is_tp = pdata && pdata->is_tp;
+
+	input_dev->name = (data->is_tp) ? "Atmel maXTouch Touchpad" :
+					  "Atmel maXTouch Touchscreen";
 	snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
 		 client->adapter->nr, client->addr);
+
 	input_dev->phys = data->phys;
 
 	input_dev->id.bustype = BUS_I2C;
@@ -1140,6 +1176,29 @@ static int mxt_probe(struct i2c_client *client,
 	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
 
+	if (data->is_tp) {
+		int i;
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+		__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+
+		for (i = 0; i < MXT_NUM_GPIO; i++)
+			if (pdata->key_map[i] != KEY_RESERVED)
+				__set_bit(pdata->key_map[i], input_dev->keybit);
+
+		__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+		__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+		__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+		__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
+		__set_bit(BTN_TOOL_QUINTTAP, input_dev->keybit);
+
+		input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
+		input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
+		input_abs_set_res(input_dev, ABS_MT_POSITION_X,
+				  MXT_PIXELS_PER_MM);
+		input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
+				  MXT_PIXELS_PER_MM);
+	}
+
 	/* For single touch */
 	input_set_abs_params(input_dev, ABS_X,
 			     0, data->max_x, 0, 0);
@@ -1258,6 +1317,7 @@ static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
 static const struct i2c_device_id mxt_id[] = {
 	{ "qt602240_ts", 0 },
 	{ "atmel_mxt_ts", 0 },
+	{ "atmel_mxt_tp", 0 },
 	{ "mXT224", 0 },
 	{ }
 };
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index 55092d1..95f6785 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -22,7 +22,7 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <mach/board.h>
+#include <linux/platform_data/atmel.h>
 #include <mach/cpu.h>
 
 /* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
diff --git a/drivers/input/touchscreen/da9052_tsi.c b/drivers/input/touchscreen/da9052_tsi.c
index 303966f..8f561e2 100644
--- a/drivers/input/touchscreen/da9052_tsi.c
+++ b/drivers/input/touchscreen/da9052_tsi.c
@@ -27,8 +27,6 @@ struct da9052_tsi {
 	struct input_dev *dev;
 	struct delayed_work ts_pen_work;
 	struct mutex mutex;
-	unsigned int irq_pendwn;
-	unsigned int irq_datardy;
 	bool stopped;
 	bool adc_on;
 };
@@ -45,8 +43,8 @@ static irqreturn_t da9052_ts_pendwn_irq(int irq, void *data)
 
 	if (!tsi->stopped) {
 		/* Mask PEN_DOWN event and unmask TSI_READY event */
-		disable_irq_nosync(tsi->irq_pendwn);
-		enable_irq(tsi->irq_datardy);
+		da9052_disable_irq_nosync(tsi->da9052, DA9052_IRQ_PENDOWN);
+		da9052_enable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
 
 		da9052_ts_adc_toggle(tsi, true);
 
@@ -137,8 +135,8 @@ static void da9052_ts_pen_work(struct work_struct *work)
 				return;
 
 			/* Mask TSI_READY event and unmask PEN_DOWN event */
-			disable_irq(tsi->irq_datardy);
-			enable_irq(tsi->irq_pendwn);
+			da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
+			da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
 		}
 	}
 }
@@ -197,7 +195,7 @@ static int da9052_ts_input_open(struct input_dev *input_dev)
 	mb();
 
 	/* Unmask PEN_DOWN event */
-	enable_irq(tsi->irq_pendwn);
+	da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
 
 	/* Enable Pen Detect Circuit */
 	return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG,
@@ -210,11 +208,11 @@ static void da9052_ts_input_close(struct input_dev *input_dev)
 
 	tsi->stopped = true;
 	mb();
-	disable_irq(tsi->irq_pendwn);
+	da9052_disable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
 	cancel_delayed_work_sync(&tsi->ts_pen_work);
 
 	if (tsi->adc_on) {
-		disable_irq(tsi->irq_datardy);
+		da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
 		da9052_ts_adc_toggle(tsi, false);
 
 		/*
@@ -222,7 +220,7 @@ static void da9052_ts_input_close(struct input_dev *input_dev)
 		 * twice and we need to enable it to keep enable/disable
 		 * counter balanced. IRQ is still off though.
 		 */
-		enable_irq(tsi->irq_pendwn);
+		da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
 	}
 
 	/* Disable Pen Detect Circuit */
@@ -234,21 +232,12 @@ static int da9052_ts_probe(struct platform_device *pdev)
 	struct da9052 *da9052;
 	struct da9052_tsi *tsi;
 	struct input_dev *input_dev;
-	int irq_pendwn;
-	int irq_datardy;
 	int error;
 
 	da9052 = dev_get_drvdata(pdev->dev.parent);
 	if (!da9052)
 		return -EINVAL;
 
-	irq_pendwn = platform_get_irq_byname(pdev, "PENDWN");
-	irq_datardy = platform_get_irq_byname(pdev, "TSIRDY");
-	if (irq_pendwn < 0 || irq_datardy < 0) {
-		dev_err(da9052->dev, "Unable to determine device interrupts\n");
-		return -ENXIO;
-	}
-
 	tsi = kzalloc(sizeof(struct da9052_tsi), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!tsi || !input_dev) {
@@ -258,8 +247,6 @@ static int da9052_ts_probe(struct platform_device *pdev)
 
 	tsi->da9052 = da9052;
 	tsi->dev = input_dev;
-	tsi->irq_pendwn = da9052->irq_base + irq_pendwn;
-	tsi->irq_datardy = da9052->irq_base + irq_datardy;
 	tsi->stopped = true;
 	INIT_DELAYED_WORK(&tsi->ts_pen_work, da9052_ts_pen_work);
 
@@ -287,31 +274,25 @@ static int da9052_ts_probe(struct platform_device *pdev)
 	/* Disable ADC */
 	da9052_ts_adc_toggle(tsi, false);
 
-	error = request_threaded_irq(tsi->irq_pendwn,
-				     NULL, da9052_ts_pendwn_irq,
-				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-				     "PENDWN", tsi);
+	error = da9052_request_irq(tsi->da9052, DA9052_IRQ_PENDOWN,
+				"pendown-irq", da9052_ts_pendwn_irq, tsi);
 	if (error) {
 		dev_err(tsi->da9052->dev,
-			"Failed to register PENDWN IRQ %d, error = %d\n",
-			tsi->irq_pendwn, error);
+			"Failed to register PENDWN IRQ: %d\n", error);
 		goto err_free_mem;
 	}
 
-	error = request_threaded_irq(tsi->irq_datardy,
-				     NULL, da9052_ts_datardy_irq,
-				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-				     "TSIRDY", tsi);
+	error = da9052_request_irq(tsi->da9052, DA9052_IRQ_TSIREADY,
+				"tsiready-irq", da9052_ts_datardy_irq, tsi);
 	if (error) {
 		dev_err(tsi->da9052->dev,
-			"Failed to register TSIRDY IRQ %d, error = %d\n",
-			tsi->irq_datardy, error);
+			"Failed to register TSIRDY IRQ :%d\n", error);
 		goto err_free_pendwn_irq;
 	}
 
 	/* Mask PEN_DOWN and TSI_READY events */
-	disable_irq(tsi->irq_pendwn);
-	disable_irq(tsi->irq_datardy);
+	da9052_disable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
+	da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
 
 	error = da9052_configure_tsi(tsi);
 	if (error)
@@ -326,9 +307,9 @@ static int da9052_ts_probe(struct platform_device *pdev)
 	return 0;
 
 err_free_datardy_irq:
-	free_irq(tsi->irq_datardy, tsi);
+	da9052_free_irq(tsi->da9052, DA9052_IRQ_TSIREADY, tsi);
 err_free_pendwn_irq:
-	free_irq(tsi->irq_pendwn, tsi);
+	da9052_free_irq(tsi->da9052, DA9052_IRQ_PENDOWN, tsi);
 err_free_mem:
 	kfree(tsi);
 	input_free_device(input_dev);
@@ -342,8 +323,8 @@ static int  da9052_ts_remove(struct platform_device *pdev)
 
 	da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x19);
 
-	free_irq(tsi->irq_pendwn, tsi);
-	free_irq(tsi->irq_datardy, tsi);
+	da9052_free_irq(tsi->da9052, DA9052_IRQ_TSIREADY, tsi);
+	da9052_free_irq(tsi->da9052, DA9052_IRQ_PENDOWN, tsi);
 
 	input_unregister_device(tsi->dev);
 	kfree(tsi);
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
index 4a29ddf..1443532 100644
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@@ -314,15 +314,27 @@ static int mms114_start(struct mms114_data *data)
 	struct i2c_client *client = data->client;
 	int error;
 
-	if (data->core_reg)
-		regulator_enable(data->core_reg);
-	if (data->io_reg)
-		regulator_enable(data->io_reg);
+	error = regulator_enable(data->core_reg);
+	if (error) {
+		dev_err(&client->dev, "Failed to enable avdd: %d\n", error);
+		return error;
+	}
+
+	error = regulator_enable(data->io_reg);
+	if (error) {
+		dev_err(&client->dev, "Failed to enable vdd: %d\n", error);
+		regulator_disable(data->core_reg);
+		return error;
+	}
+
 	mdelay(MMS114_POWERON_DELAY);
 
 	error = mms114_setup_regs(data);
-	if (error < 0)
+	if (error < 0) {
+		regulator_disable(data->io_reg);
+		regulator_disable(data->core_reg);
 		return error;
+	}
 
 	if (data->pdata->cfg_pin)
 		data->pdata->cfg_pin(true);
@@ -335,16 +347,20 @@ static int mms114_start(struct mms114_data *data)
 static void mms114_stop(struct mms114_data *data)
 {
 	struct i2c_client *client = data->client;
+	int error;
 
 	disable_irq(client->irq);
 
 	if (data->pdata->cfg_pin)
 		data->pdata->cfg_pin(false);
 
-	if (data->io_reg)
-		regulator_disable(data->io_reg);
-	if (data->core_reg)
-		regulator_disable(data->core_reg);
+	error = regulator_disable(data->io_reg);
+	if (error)
+		dev_warn(&client->dev, "Failed to disable vdd: %d\n", error);
+
+	error = regulator_disable(data->core_reg);
+	if (error)
+		dev_warn(&client->dev, "Failed to disable avdd: %d\n", error);
 }
 
 static int mms114_input_open(struct input_dev *dev)
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
new file mode 100644
index 0000000..51e7b87
--- /dev/null
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -0,0 +1,398 @@
+/*
+ * TI Touch Screen driver
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input/ti_am335x_tsc.h>
+#include <linux/delay.h>
+
+#include <linux/mfd/ti_am335x_tscadc.h>
+
+#define ADCFSM_STEPID		0x10
+#define SEQ_SETTLE		275
+#define MAX_12BIT		((1 << 12) - 1)
+
+struct titsc {
+	struct input_dev	*input;
+	struct ti_tscadc_dev	*mfd_tscadc;
+	unsigned int		irq;
+	unsigned int		wires;
+	unsigned int		x_plate_resistance;
+	bool			pen_down;
+	int			steps_to_configure;
+};
+
+static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
+{
+	return readl(ts->mfd_tscadc->tscadc_base + reg);
+}
+
+static void titsc_writel(struct titsc *tsc, unsigned int reg,
+					unsigned int val)
+{
+	writel(val, tsc->mfd_tscadc->tscadc_base + reg);
+}
+
+static void titsc_step_config(struct titsc *ts_dev)
+{
+	unsigned int	config;
+	int i, total_steps;
+
+	/* Configure the Step registers */
+	total_steps = 2 * ts_dev->steps_to_configure;
+
+	config = STEPCONFIG_MODE_HWSYNC |
+			STEPCONFIG_AVG_16 | STEPCONFIG_XPP;
+	switch (ts_dev->wires) {
+	case 4:
+		config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+		break;
+	case 5:
+		config |= STEPCONFIG_YNN |
+				STEPCONFIG_INP_AN4 | STEPCONFIG_XNN |
+				STEPCONFIG_YPP;
+		break;
+	case 8:
+		config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+		break;
+	}
+
+	for (i = 1; i <= ts_dev->steps_to_configure; i++) {
+		titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
+		titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
+	}
+
+	config = 0;
+	config = STEPCONFIG_MODE_HWSYNC |
+			STEPCONFIG_AVG_16 | STEPCONFIG_YNN |
+			STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1;
+	switch (ts_dev->wires) {
+	case 4:
+		config |= STEPCONFIG_YPP;
+		break;
+	case 5:
+		config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 |
+				STEPCONFIG_XNP | STEPCONFIG_YPN;
+		break;
+	case 8:
+		config |= STEPCONFIG_YPP;
+		break;
+	}
+
+	for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) {
+		titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
+		titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
+	}
+
+	config = 0;
+	/* Charge step configuration */
+	config = STEPCONFIG_XPP | STEPCONFIG_YNN |
+			STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR |
+			STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1;
+
+	titsc_writel(ts_dev, REG_CHARGECONFIG, config);
+	titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY);
+
+	config = 0;
+	/* Configure to calculate pressure */
+	config = STEPCONFIG_MODE_HWSYNC |
+			STEPCONFIG_AVG_16 | STEPCONFIG_YPP |
+			STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM;
+	titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config);
+	titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1),
+			STEPCONFIG_OPENDLY);
+
+	config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1;
+	titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config);
+	titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2),
+			STEPCONFIG_OPENDLY);
+
+	titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
+}
+
+static void titsc_read_coordinates(struct titsc *ts_dev,
+				    unsigned int *x, unsigned int *y)
+{
+	unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT);
+	unsigned int prev_val_x = ~0, prev_val_y = ~0;
+	unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
+	unsigned int read, diff;
+	unsigned int i, channel;
+
+	/*
+	 * Delta filter is used to remove large variations in sampled
+	 * values from ADC. The filter tries to predict where the next
+	 * coordinate could be. This is done by taking a previous
+	 * coordinate and subtracting it form current one. Further the
+	 * algorithm compares the difference with that of a present value,
+	 * if true the value is reported to the sub system.
+	 */
+	for (i = 0; i < fifocount - 1; i++) {
+		read = titsc_readl(ts_dev, REG_FIFO0);
+		channel = read & 0xf0000;
+		channel = channel >> 0x10;
+		if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) {
+			read &= 0xfff;
+			diff = abs(read - prev_val_x);
+			if (diff < prev_diff_x) {
+				prev_diff_x = diff;
+				*x = read;
+			}
+			prev_val_x = read;
+		}
+
+		read = titsc_readl(ts_dev, REG_FIFO1);
+		channel = read & 0xf0000;
+		channel = channel >> 0x10;
+		if ((channel >= ts_dev->steps_to_configure) &&
+			(channel < (2 * ts_dev->steps_to_configure - 1))) {
+			read &= 0xfff;
+			diff = abs(read - prev_val_y);
+			if (diff < prev_diff_y) {
+				prev_diff_y = diff;
+				*y = read;
+			}
+			prev_val_y = read;
+		}
+	}
+}
+
+static irqreturn_t titsc_irq(int irq, void *dev)
+{
+	struct titsc *ts_dev = dev;
+	struct input_dev *input_dev = ts_dev->input;
+	unsigned int status, irqclr = 0;
+	unsigned int x = 0, y = 0;
+	unsigned int z1, z2, z;
+	unsigned int fsm;
+	unsigned int fifo1count, fifo0count;
+	int i;
+
+	status = titsc_readl(ts_dev, REG_IRQSTATUS);
+	if (status & IRQENB_FIFO0THRES) {
+		titsc_read_coordinates(ts_dev, &x, &y);
+
+		z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff;
+		z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff;
+
+		fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT);
+		for (i = 0; i < fifo1count; i++)
+			titsc_readl(ts_dev, REG_FIFO1);
+
+		fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT);
+		for (i = 0; i < fifo0count; i++)
+			titsc_readl(ts_dev, REG_FIFO0);
+
+		if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
+			/*
+			 * Calculate pressure using formula
+			 * Resistance(touch) = x plate resistance *
+			 * x postion/4096 * ((z2 / z1) - 1)
+			 */
+			z = z2 - z1;
+			z *= x;
+			z *= ts_dev->x_plate_resistance;
+			z /= z1;
+			z = (z + 2047) >> 12;
+
+			if (z <= MAX_12BIT) {
+				input_report_abs(input_dev, ABS_X, x);
+				input_report_abs(input_dev, ABS_Y, y);
+				input_report_abs(input_dev, ABS_PRESSURE, z);
+				input_report_key(input_dev, BTN_TOUCH, 1);
+				input_sync(input_dev);
+			}
+		}
+		irqclr |= IRQENB_FIFO0THRES;
+	}
+
+	/*
+	 * Time for sequencer to settle, to read
+	 * correct state of the sequencer.
+	 */
+	udelay(SEQ_SETTLE);
+
+	status = titsc_readl(ts_dev, REG_RAWIRQSTATUS);
+	if (status & IRQENB_PENUP) {
+		/* Pen up event */
+		fsm = titsc_readl(ts_dev, REG_ADCFSM);
+		if (fsm == ADCFSM_STEPID) {
+			ts_dev->pen_down = false;
+			input_report_key(input_dev, BTN_TOUCH, 0);
+			input_report_abs(input_dev, ABS_PRESSURE, 0);
+			input_sync(input_dev);
+		} else {
+			ts_dev->pen_down = true;
+		}
+		irqclr |= IRQENB_PENUP;
+	}
+
+	titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
+
+	titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
+	return IRQ_HANDLED;
+}
+
+/*
+ * The functions for inserting/removing driver as a module.
+ */
+
+static int titsc_probe(struct platform_device *pdev)
+{
+	struct titsc *ts_dev;
+	struct input_dev *input_dev;
+	struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
+	struct mfd_tscadc_board	*pdata;
+	int err;
+
+	pdata = tscadc_dev->dev->platform_data;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "Could not find platform data\n");
+		return -EINVAL;
+	}
+
+	/* Allocate memory for device */
+	ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts_dev || !input_dev) {
+		dev_err(&pdev->dev, "failed to allocate memory.\n");
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	tscadc_dev->tsc = ts_dev;
+	ts_dev->mfd_tscadc = tscadc_dev;
+	ts_dev->input = input_dev;
+	ts_dev->irq = tscadc_dev->irq;
+	ts_dev->wires = pdata->tsc_init->wires;
+	ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;
+	ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;
+
+	err = request_irq(ts_dev->irq, titsc_irq,
+			  0, pdev->dev.driver->name, ts_dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to allocate irq.\n");
+		goto err_free_mem;
+	}
+
+	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
+	titsc_step_config(ts_dev);
+	titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure);
+
+	input_dev->name = "ti-tsc";
+	input_dev->dev.parent = &pdev->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
+
+	/* register to the input system */
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_free_irq;
+
+	platform_set_drvdata(pdev, ts_dev);
+	return 0;
+
+err_free_irq:
+	free_irq(ts_dev->irq, ts_dev);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts_dev);
+	return err;
+}
+
+static int titsc_remove(struct platform_device *pdev)
+{
+	struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
+	struct titsc *ts_dev = tscadc_dev->tsc;
+
+	free_irq(ts_dev->irq, ts_dev);
+
+	input_unregister_device(ts_dev->input);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(ts_dev);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int titsc_suspend(struct device *dev)
+{
+	struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
+	struct titsc *ts_dev = tscadc_dev->tsc;
+	unsigned int idle;
+
+	if (device_may_wakeup(tscadc_dev->dev)) {
+		idle = titsc_readl(ts_dev, REG_IRQENABLE);
+		titsc_writel(ts_dev, REG_IRQENABLE,
+				(idle | IRQENB_HW_PEN));
+		titsc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
+	}
+	return 0;
+}
+
+static int titsc_resume(struct device *dev)
+{
+	struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
+	struct titsc *ts_dev = tscadc_dev->tsc;
+
+	if (device_may_wakeup(tscadc_dev->dev)) {
+		titsc_writel(ts_dev, REG_IRQWAKEUP,
+				0x00);
+		titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
+	}
+	titsc_step_config(ts_dev);
+	titsc_writel(ts_dev, REG_FIFO0THR,
+			ts_dev->steps_to_configure);
+	return 0;
+}
+
+static const struct dev_pm_ops titsc_pm_ops = {
+	.suspend = titsc_suspend,
+	.resume  = titsc_resume,
+};
+#define TITSC_PM_OPS (&titsc_pm_ops)
+#else
+#define TITSC_PM_OPS NULL
+#endif
+
+static struct platform_driver ti_tsc_driver = {
+	.probe	= titsc_probe,
+	.remove	= titsc_remove,
+	.driver	= {
+		.name   = "tsc",
+		.owner	= THIS_MODULE,
+		.pm	= TITSC_PM_OPS,
+	},
+};
+module_platform_driver(ti_tsc_driver);
+
+MODULE_DESCRIPTION("TI touchscreen controller driver");
+MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/ti_tscadc.c b/drivers/input/touchscreen/ti_tscadc.c
deleted file mode 100644
index bcedf2e..0000000
--- a/drivers/input/touchscreen/ti_tscadc.c
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
- * TI Touch Screen driver
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/input/ti_tscadc.h>
-#include <linux/delay.h>
-
-#define REG_IRQEOI		0x020
-#define REG_RAWIRQSTATUS	0x024
-#define REG_IRQSTATUS		0x028
-#define REG_IRQENABLE		0x02C
-#define REG_IRQWAKEUP		0x034
-#define REG_CTRL		0x040
-#define REG_ADCFSM		0x044
-#define REG_CLKDIV		0x04C
-#define REG_SE			0x054
-#define REG_IDLECONFIG		0x058
-#define REG_CHARGECONFIG	0x05C
-#define REG_CHARGEDELAY		0x060
-#define REG_STEPCONFIG(n)	(0x64 + ((n - 1) * 8))
-#define REG_STEPDELAY(n)	(0x68 + ((n - 1) * 8))
-#define REG_STEPCONFIG13	0x0C4
-#define REG_STEPDELAY13		0x0C8
-#define REG_STEPCONFIG14	0x0CC
-#define REG_STEPDELAY14		0x0D0
-#define REG_FIFO0CNT		0xE4
-#define REG_FIFO1THR		0xF4
-#define REG_FIFO0		0x100
-#define REG_FIFO1		0x200
-
-/*	Register Bitfields	*/
-#define IRQWKUP_ENB		BIT(0)
-#define STPENB_STEPENB		0x7FFF
-#define IRQENB_FIFO1THRES	BIT(5)
-#define IRQENB_PENUP		BIT(9)
-#define STEPCONFIG_MODE_HWSYNC	0x2
-#define STEPCONFIG_SAMPLES_AVG	(1 << 4)
-#define STEPCONFIG_XPP		(1 << 5)
-#define STEPCONFIG_XNN		(1 << 6)
-#define STEPCONFIG_YPP		(1 << 7)
-#define STEPCONFIG_YNN		(1 << 8)
-#define STEPCONFIG_XNP		(1 << 9)
-#define STEPCONFIG_YPN		(1 << 10)
-#define STEPCONFIG_INM		(1 << 18)
-#define STEPCONFIG_INP		(1 << 20)
-#define STEPCONFIG_INP_5	(1 << 21)
-#define STEPCONFIG_FIFO1	(1 << 26)
-#define STEPCONFIG_OPENDLY	0xff
-#define STEPCONFIG_Z1		(3 << 19)
-#define STEPIDLE_INP		(1 << 22)
-#define STEPCHARGE_RFP		(1 << 12)
-#define STEPCHARGE_INM		(1 << 15)
-#define STEPCHARGE_INP		(1 << 19)
-#define STEPCHARGE_RFM		(1 << 23)
-#define STEPCHARGE_DELAY	0x1
-#define CNTRLREG_TSCSSENB	(1 << 0)
-#define CNTRLREG_STEPID		(1 << 1)
-#define CNTRLREG_STEPCONFIGWRT	(1 << 2)
-#define CNTRLREG_4WIRE		(1 << 5)
-#define CNTRLREG_5WIRE		(1 << 6)
-#define CNTRLREG_8WIRE		(3 << 5)
-#define CNTRLREG_TSCENB		(1 << 7)
-#define ADCFSM_STEPID		0x10
-
-#define SEQ_SETTLE		275
-#define ADC_CLK			3000000
-#define MAX_12BIT		((1 << 12) - 1)
-#define TSCADC_DELTA_X		15
-#define TSCADC_DELTA_Y		15
-
-struct tscadc {
-	struct input_dev	*input;
-	struct clk		*tsc_ick;
-	void __iomem		*tsc_base;
-	unsigned int		irq;
-	unsigned int		wires;
-	unsigned int		x_plate_resistance;
-	bool			pen_down;
-};
-
-static unsigned int tscadc_readl(struct tscadc *ts, unsigned int reg)
-{
-	return readl(ts->tsc_base + reg);
-}
-
-static void tscadc_writel(struct tscadc *tsc, unsigned int reg,
-					unsigned int val)
-{
-	writel(val, tsc->tsc_base + reg);
-}
-
-static void tscadc_step_config(struct tscadc *ts_dev)
-{
-	unsigned int	config;
-	int i;
-
-	/* Configure the Step registers */
-
-	config = STEPCONFIG_MODE_HWSYNC |
-			STEPCONFIG_SAMPLES_AVG | STEPCONFIG_XPP;
-	switch (ts_dev->wires) {
-	case 4:
-		config |= STEPCONFIG_INP | STEPCONFIG_XNN;
-		break;
-	case 5:
-		config |= STEPCONFIG_YNN |
-				STEPCONFIG_INP_5 | STEPCONFIG_XNN |
-				STEPCONFIG_YPP;
-		break;
-	case 8:
-		config |= STEPCONFIG_INP | STEPCONFIG_XNN;
-		break;
-	}
-
-	for (i = 1; i < 7; i++) {
-		tscadc_writel(ts_dev, REG_STEPCONFIG(i), config);
-		tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
-	}
-
-	config = 0;
-	config = STEPCONFIG_MODE_HWSYNC |
-			STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YNN |
-			STEPCONFIG_INM | STEPCONFIG_FIFO1;
-	switch (ts_dev->wires) {
-	case 4:
-		config |= STEPCONFIG_YPP;
-		break;
-	case 5:
-		config |= STEPCONFIG_XPP | STEPCONFIG_INP_5 |
-				STEPCONFIG_XNP | STEPCONFIG_YPN;
-		break;
-	case 8:
-		config |= STEPCONFIG_YPP;
-		break;
-	}
-
-	for (i = 7; i < 13; i++) {
-		tscadc_writel(ts_dev, REG_STEPCONFIG(i), config);
-		tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
-	}
-
-	config = 0;
-	/* Charge step configuration */
-	config = STEPCONFIG_XPP | STEPCONFIG_YNN |
-			STEPCHARGE_RFP | STEPCHARGE_RFM |
-			STEPCHARGE_INM | STEPCHARGE_INP;
-
-	tscadc_writel(ts_dev, REG_CHARGECONFIG, config);
-	tscadc_writel(ts_dev, REG_CHARGEDELAY, STEPCHARGE_DELAY);
-
-	config = 0;
-	/* Configure to calculate pressure */
-	config = STEPCONFIG_MODE_HWSYNC |
-			STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YPP |
-			STEPCONFIG_XNN | STEPCONFIG_INM;
-	tscadc_writel(ts_dev, REG_STEPCONFIG13, config);
-	tscadc_writel(ts_dev, REG_STEPDELAY13, STEPCONFIG_OPENDLY);
-
-	config |= STEPCONFIG_Z1 | STEPCONFIG_FIFO1;
-	tscadc_writel(ts_dev, REG_STEPCONFIG14, config);
-	tscadc_writel(ts_dev, REG_STEPDELAY14, STEPCONFIG_OPENDLY);
-
-	tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB);
-}
-
-static void tscadc_idle_config(struct tscadc *ts_config)
-{
-	unsigned int idleconfig;
-
-	idleconfig = STEPCONFIG_YNN |
-			STEPCONFIG_INM |
-			STEPCONFIG_YPN | STEPIDLE_INP;
-	tscadc_writel(ts_config, REG_IDLECONFIG, idleconfig);
-}
-
-static void tscadc_read_coordinates(struct tscadc *ts_dev,
-				    unsigned int *x, unsigned int *y)
-{
-	unsigned int fifocount = tscadc_readl(ts_dev, REG_FIFO0CNT);
-	unsigned int prev_val_x = ~0, prev_val_y = ~0;
-	unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
-	unsigned int read, diff;
-	unsigned int i;
-
-	/*
-	 * Delta filter is used to remove large variations in sampled
-	 * values from ADC. The filter tries to predict where the next
-	 * coordinate could be. This is done by taking a previous
-	 * coordinate and subtracting it form current one. Further the
-	 * algorithm compares the difference with that of a present value,
-	 * if true the value is reported to the sub system.
-	 */
-	for (i = 0; i < fifocount - 1; i++) {
-		read = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff;
-		diff = abs(read - prev_val_x);
-		if (diff < prev_diff_x) {
-			prev_diff_x = diff;
-			*x = read;
-		}
-		prev_val_x = read;
-
-		read = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff;
-		diff = abs(read - prev_val_y);
-		if (diff < prev_diff_y) {
-			prev_diff_y = diff;
-			*y = read;
-		}
-		prev_val_y = read;
-	}
-}
-
-static irqreturn_t tscadc_irq(int irq, void *dev)
-{
-	struct tscadc *ts_dev = dev;
-	struct input_dev *input_dev = ts_dev->input;
-	unsigned int status, irqclr = 0;
-	unsigned int x = 0, y = 0;
-	unsigned int z1, z2, z;
-	unsigned int fsm;
-
-	status = tscadc_readl(ts_dev, REG_IRQSTATUS);
-	if (status & IRQENB_FIFO1THRES) {
-		tscadc_read_coordinates(ts_dev, &x, &y);
-
-		z1 = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff;
-		z2 = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff;
-
-		if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
-			/*
-			 * Calculate pressure using formula
-			 * Resistance(touch) = x plate resistance *
-			 * x postion/4096 * ((z2 / z1) - 1)
-			 */
-			z = z2 - z1;
-			z *= x;
-			z *= ts_dev->x_plate_resistance;
-			z /= z1;
-			z = (z + 2047) >> 12;
-
-			if (z <= MAX_12BIT) {
-				input_report_abs(input_dev, ABS_X, x);
-				input_report_abs(input_dev, ABS_Y, y);
-				input_report_abs(input_dev, ABS_PRESSURE, z);
-				input_report_key(input_dev, BTN_TOUCH, 1);
-				input_sync(input_dev);
-			}
-		}
-		irqclr |= IRQENB_FIFO1THRES;
-	}
-
-	/*
-	 * Time for sequencer to settle, to read
-	 * correct state of the sequencer.
-	 */
-	udelay(SEQ_SETTLE);
-
-	status = tscadc_readl(ts_dev, REG_RAWIRQSTATUS);
-	if (status & IRQENB_PENUP) {
-		/* Pen up event */
-		fsm = tscadc_readl(ts_dev, REG_ADCFSM);
-		if (fsm == ADCFSM_STEPID) {
-			ts_dev->pen_down = false;
-			input_report_key(input_dev, BTN_TOUCH, 0);
-			input_report_abs(input_dev, ABS_PRESSURE, 0);
-			input_sync(input_dev);
-		} else {
-			ts_dev->pen_down = true;
-		}
-		irqclr |= IRQENB_PENUP;
-	}
-
-	tscadc_writel(ts_dev, REG_IRQSTATUS, irqclr);
-	/* check pending interrupts */
-	tscadc_writel(ts_dev, REG_IRQEOI, 0x0);
-
-	tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB);
-	return IRQ_HANDLED;
-}
-
-/*
- * The functions for inserting/removing driver as a module.
- */
-
-static int tscadc_probe(struct platform_device *pdev)
-{
-	const struct tsc_data *pdata = pdev->dev.platform_data;
-	struct resource *res;
-	struct tscadc *ts_dev;
-	struct input_dev *input_dev;
-	struct clk *clk;
-	int err;
-	int clk_value, ctrl, irq;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "missing platform data.\n");
-		return -EINVAL;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "no memory resource defined.\n");
-		return -EINVAL;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no irq ID is specified.\n");
-		return -EINVAL;
-	}
-
-	/* Allocate memory for device */
-	ts_dev = kzalloc(sizeof(struct tscadc), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ts_dev || !input_dev) {
-		dev_err(&pdev->dev, "failed to allocate memory.\n");
-		err = -ENOMEM;
-		goto err_free_mem;
-	}
-
-	ts_dev->input = input_dev;
-	ts_dev->irq = irq;
-	ts_dev->wires = pdata->wires;
-	ts_dev->x_plate_resistance = pdata->x_plate_resistance;
-
-	res = request_mem_region(res->start, resource_size(res), pdev->name);
-	if (!res) {
-		dev_err(&pdev->dev, "failed to reserve registers.\n");
-		err = -EBUSY;
-		goto err_free_mem;
-	}
-
-	ts_dev->tsc_base = ioremap(res->start, resource_size(res));
-	if (!ts_dev->tsc_base) {
-		dev_err(&pdev->dev, "failed to map registers.\n");
-		err = -ENOMEM;
-		goto err_release_mem_region;
-	}
-
-	err = request_irq(ts_dev->irq, tscadc_irq,
-			  0, pdev->dev.driver->name, ts_dev);
-	if (err) {
-		dev_err(&pdev->dev, "failed to allocate irq.\n");
-		goto err_unmap_regs;
-	}
-
-	ts_dev->tsc_ick = clk_get(&pdev->dev, "adc_tsc_ick");
-	if (IS_ERR(ts_dev->tsc_ick)) {
-		dev_err(&pdev->dev, "failed to get TSC ick\n");
-		goto err_free_irq;
-	}
-	clk_enable(ts_dev->tsc_ick);
-
-	clk = clk_get(&pdev->dev, "adc_tsc_fck");
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "failed to get TSC fck\n");
-		err = PTR_ERR(clk);
-		goto err_disable_clk;
-	}
-
-	clk_value = clk_get_rate(clk) / ADC_CLK;
-	clk_put(clk);
-
-	if (clk_value < 7) {
-		dev_err(&pdev->dev, "clock input less than min clock requirement\n");
-		goto err_disable_clk;
-	}
-	/* CLKDIV needs to be configured to the value minus 1 */
-	tscadc_writel(ts_dev, REG_CLKDIV, clk_value - 1);
-
-	 /* Enable wake-up of the SoC using touchscreen */
-	tscadc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
-
-	ctrl = CNTRLREG_STEPCONFIGWRT |
-			CNTRLREG_TSCENB |
-			CNTRLREG_STEPID;
-	switch (ts_dev->wires) {
-	case 4:
-		ctrl |= CNTRLREG_4WIRE;
-		break;
-	case 5:
-		ctrl |= CNTRLREG_5WIRE;
-		break;
-	case 8:
-		ctrl |= CNTRLREG_8WIRE;
-		break;
-	}
-	tscadc_writel(ts_dev, REG_CTRL, ctrl);
-
-	tscadc_idle_config(ts_dev);
-	tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO1THRES);
-	tscadc_step_config(ts_dev);
-	tscadc_writel(ts_dev, REG_FIFO1THR, 6);
-
-	ctrl |= CNTRLREG_TSCSSENB;
-	tscadc_writel(ts_dev, REG_CTRL, ctrl);
-
-	input_dev->name = "ti-tsc-adc";
-	input_dev->dev.parent = &pdev->dev;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
-	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
-	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
-
-	/* register to the input system */
-	err = input_register_device(input_dev);
-	if (err)
-		goto err_disable_clk;
-
-	platform_set_drvdata(pdev, ts_dev);
-	return 0;
-
-err_disable_clk:
-	clk_disable(ts_dev->tsc_ick);
-	clk_put(ts_dev->tsc_ick);
-err_free_irq:
-	free_irq(ts_dev->irq, ts_dev);
-err_unmap_regs:
-	iounmap(ts_dev->tsc_base);
-err_release_mem_region:
-	release_mem_region(res->start, resource_size(res));
-err_free_mem:
-	input_free_device(input_dev);
-	kfree(ts_dev);
-	return err;
-}
-
-static int __devexit tscadc_remove(struct platform_device *pdev)
-{
-	struct tscadc *ts_dev = platform_get_drvdata(pdev);
-	struct resource *res;
-
-	free_irq(ts_dev->irq, ts_dev);
-
-	input_unregister_device(ts_dev->input);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	iounmap(ts_dev->tsc_base);
-	release_mem_region(res->start, resource_size(res));
-
-	clk_disable(ts_dev->tsc_ick);
-	clk_put(ts_dev->tsc_ick);
-
-	kfree(ts_dev);
-
-	platform_set_drvdata(pdev, NULL);
-	return 0;
-}
-
-static struct platform_driver ti_tsc_driver = {
-	.probe	= tscadc_probe,
-	.remove	= __devexit_p(tscadc_remove),
-	.driver	= {
-		.name   = "tsc",
-		.owner	= THIS_MODULE,
-	},
-};
-module_platform_driver(ti_tsc_driver);
-
-MODULE_DESCRIPTION("TI touchscreen controller driver");
-MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
-MODULE_LICENSE("GPL");