Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: rename SW_RADIO to SW_RFKILL_ALL
  Input: gtco - fix double kfree in error handling path
  Input: pxa27x_keypad - miscellaneous fixes
  Input: atkbd - mark keyboard as disabled when suspending/unloading
  Input: apanel - remove duplicate include
  Input: wm9713 - support five wire panels
  Input: wm97xx-core - fix race on PHY init
  Input: wm97xx-core - fix driver name
  Input: wm97xx-core - report a phys for WM97xx touchscreens
  Input: i8042 - make sure Dritek quirk is invoked at resume
  Input: i8042 - add Dritek quirk for Acer TravelMate 660

2 files changed, 35 insertions, 12 deletions

diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 01278bd..8384587 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -85,6 +85,15 @@ module_param(delay, int, 0);
 MODULE_PARM_DESC(delay, "Set adc sample delay.");
 
 /*
+ * Set five_wire = 1 to use a 5 wire touchscreen.
+ *
+ * NOTE: Five wire mode does not allow for readback of pressure.
+ */
+static int five_wire;
+module_param(five_wire, int, 0);
+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
+
+/*
  * Set adc mask function.
  *
  * Sources of glitch noise, such as signals driving an LCD display, may feed
@@ -162,6 +171,19 @@ static void wm9713_phy_init(struct wm97xx *wm)
 			 64000 / rpu);
 	}
 
+	/* Five wire panel? */
+	if (five_wire) {
+		dig3 |= WM9713_45W;
+		dev_info(wm->dev, "setting 5-wire touchscreen mode.");
+
+		if (pil) {
+			dev_warn(wm->dev,
+				 "Pressure measurement not supported in 5 "
+				 "wire mode, disabling\n");
+			pil = 0;
+		}
+	}
+
 	/* touchpanel pressure */
 	if (pil == 2) {
 		dig3 |= WM9712_PIL;
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index e9c7ea4..cdc24ad 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -608,6 +608,17 @@ static int wm97xx_probe(struct device *dev)
 		goto alloc_err;
 	}
 
+	/* set up physical characteristics */
+	wm->codec->phy_init(wm);
+
+	/* load gpio cache */
+	wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
+	wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
+	wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
+	wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
+	wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
+	wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
+
 	wm->input_dev = input_allocate_device();
 	if (wm->input_dev == NULL) {
 		ret = -ENOMEM;
@@ -616,6 +627,7 @@ static int wm97xx_probe(struct device *dev)
 
 	/* set up touch configuration */
 	wm->input_dev->name = "wm97xx touchscreen";
+	wm->input_dev->phys = "wm97xx";
 	wm->input_dev->open = wm97xx_ts_input_open;
 	wm->input_dev->close = wm97xx_ts_input_close;
 	set_bit(EV_ABS, wm->input_dev->evbit);
@@ -634,17 +646,6 @@ static int wm97xx_probe(struct device *dev)
 	if (ret < 0)
 		goto dev_alloc_err;
 
-	/* set up physical characteristics */
-	wm->codec->phy_init(wm);
-
-	/* load gpio cache */
-	wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
-	wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
-	wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
-	wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
-	wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
-	wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
-
 	/* register our battery device */
 	wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
 	if (!wm->battery_dev) {
@@ -801,7 +802,7 @@ void wm97xx_unregister_mach_ops(struct wm97xx *wm)
 EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
 
 static struct device_driver wm97xx_driver = {
-	.name =		"ac97",
+	.name =		"wm97xx-ts",
 	.bus =		&ac97_bus_type,
 	.owner =	THIS_MODULE,
 	.probe =	wm97xx_probe,