Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd

Pull MFD changes from Lee Jones:
 "New drivers
   - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and
     Battery Charger
   - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM
     Generator

  Existing driver adaptions
   - Expansion of Wolfson Arizona DSP and High-Pass filter controls
   - TI TWL6040 default Regmap support and Regcache addition/bypass
   - Some nice Smatch catch fixes
   - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
   - ChromeOS EC timing (delay) adaptions and added dependency on OF
   - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}'
   - Watchdog support added for NVIDIA AS3722
   - Convert functions to static in TI AM335x
   - Realigned previously defeated functionality in TI AM335x
   - IIO ADC-TSC concurrency dead-lock/timeout resolution
   - Addition of Power Management and Clock support for Samsung core
   - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
   - Greater use of irqdomain functionality in ST-E AB8500
   - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
   - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
   - Device Tree documentation added for TI/Nat Semi LP3943
   - Version detection and voltage tables for TI TPS6586x PMIC devices
   - Simplification of Freescale MC13XXX (de-)initialisation routines
   - Clean-up and simplification of the Realtek parent driver
   - Added support for RTL8402 Realtek PCI-Express card reader
   - Resource leak fix for Maxim 77686
   - Possible suspend BUG() fix in OMAP USB TLL
   - Support for new Wolfson WM5110 Revision (D)
   - Testing of automatic assignment of of_node in mfd_add_device()
   - Reversion of the above when it started to cause issues
   - Remove legacy Platform Data from;
              TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
   - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL'
              removal, unused uninitialised warning mitigation, error
              message clarity, removal of redundant/duplicate checks,
              licensing (GPL -> GPL2), coding consistency, duplicate
              function declaration, ret checks, commit corrections,
              redundant of_match_ptr() helper removal, spelling,
              #if-deffery removal and header guards name changes"

* tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits)
  mfd: wm5110: Add register patch for rev D chip
  mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()
  gpio: lp3943: Remove redundant of_match_ptr helper
  mfd: sta2x11-mfd: Use named constants for pci_power_t values
  Documentation: mfd: Fix LDO index in s2mps11.txt
  mfd: Cleanup mfd-mcp-sa11x0.h header
  mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.
  mfd: twl6030: Fix endianness problem in IRQ handler
  mfd: sec-core: Add cells for S5M8767-clocks
  mfd: max14577: Remove redundant of_match_ptr helper
  mfd: twl6040: Fix sparse non static symbol warning
  mfd: Revert "mfd: Always assign of_node in mfd_add_device()"
  mfd: rtsx: Fix sparse non static symbol warning
  mfd: max77693: Set proper maximum register for MUIC regmap
  mfd: max77686: Fix regmap resource leak on driver remove
  mfd: Represent correct filenames in file headers
  mfd: rtsx: Add support for card reader rtl8402
  mfd: rtsx: Add set pull control macro and simplify rtl8411
  mfd: max8997: Enforce mfd_add_devices() return value check
  mfd: mc13xxx: Simplify probe() & remove()
  ...

1 files changed, 49 insertions, 19 deletions

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index d4d7482..31e786e 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -60,6 +60,24 @@ static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
 	return step_en;
 }
 
+static u32 get_adc_chan_step_mask(struct tiadc_device *adc_dev,
+		struct iio_chan_spec const *chan)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(adc_dev->channel_step); i++) {
+		if (chan->channel == adc_dev->channel_line[i]) {
+			u32 step;
+
+			step = adc_dev->channel_step[i];
+			/* +1 for the charger */
+			return 1 << (step + 1);
+		}
+	}
+	WARN_ON(1);
+	return 0;
+}
+
 static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan)
 {
 	return 1 << adc_dev->channel_step[chan];
@@ -181,7 +199,7 @@ static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
 		enb |= (get_adc_step_bit(adc_dev, bit) << 1);
 	adc_dev->buffer_en_ch_steps = enb;
 
-	am335x_tsc_se_set(adc_dev->mfd_tscadc, enb);
+	am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb);
 
 	tiadc_writel(adc_dev,  REG_IRQSTATUS, IRQENB_FIFO1THRES
 				| IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW);
@@ -199,6 +217,7 @@ static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
 	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
 				IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
 	am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
+	adc_dev->buffer_en_ch_steps = 0;
 
 	/* Flush FIFO of leftover data in the time it takes to disable adc */
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
@@ -328,34 +347,43 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 	unsigned int fifo1count, read, stepid;
 	bool found = false;
 	u32 step_en;
-	unsigned long timeout = jiffies + usecs_to_jiffies
-				(IDLE_TIMEOUT * adc_dev->channels);
+	unsigned long timeout;
 
 	if (iio_buffer_enabled(indio_dev))
 		return -EBUSY;
 
-	step_en = get_adc_step_mask(adc_dev);
-	am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en);
+	step_en = get_adc_chan_step_mask(adc_dev, chan);
+	if (!step_en)
+		return -EINVAL;
+
+	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+	while (fifo1count--)
+		tiadc_readl(adc_dev, REG_FIFO1);
+
+	am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
 
-	/* Wait for ADC sequencer to complete sampling */
-	while (tiadc_readl(adc_dev, REG_ADCFSM) & SEQ_STATUS) {
-		if (time_after(jiffies, timeout))
+	timeout = jiffies + usecs_to_jiffies
+				(IDLE_TIMEOUT * adc_dev->channels);
+	/* Wait for Fifo threshold interrupt */
+	while (1) {
+		fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+		if (fifo1count)
+			break;
+
+		if (time_after(jiffies, timeout)) {
+			am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
 			return -EAGAIN;
 		}
+	}
 	map_val = chan->channel + TOTAL_CHANNELS;
 
 	/*
-	 * When the sub-system is first enabled,
-	 * the sequencer will always start with the
-	 * lowest step (1) and continue until step (16).
-	 * For ex: If we have enabled 4 ADC channels and
-	 * currently use only 1 out of them, the
-	 * sequencer still configures all the 4 steps,
-	 * leading to 3 unwanted data.
-	 * Hence we need to flush out this data.
+	 * We check the complete FIFO. We programmed just one entry but in case
+	 * something went wrong we left empty handed (-EAGAIN previously) and
+	 * then the value apeared somehow in the FIFO we would have two entries.
+	 * Therefore we read every item and keep only the latest version of the
+	 * requested channel.
 	 */
-
-	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 	for (i = 0; i < fifo1count; i++) {
 		read = tiadc_readl(adc_dev, REG_FIFO1);
 		stepid = read & FIFOREAD_CHNLID_MASK;
@@ -367,6 +395,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 			*val = (u16) read;
 		}
 	}
+	am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
 
 	if (found == false)
 		return -EBUSY;
@@ -494,7 +523,8 @@ static int tiadc_resume(struct device *dev)
 	tiadc_writel(adc_dev, REG_CTRL, restore);
 
 	tiadc_step_config(indio_dev);
-
+	am335x_tsc_se_set_cache(adc_dev->mfd_tscadc,
+			adc_dev->buffer_en_ch_steps);
 	return 0;
 }