iio: accel: st_accel: inline per-sensor data

We have #defines for all the individual sensor registers and
value/mask pairs #defined at the top of the file and used at
exactly one spot.

This is usually good if the #defines give a meaning to the
opaque magic numbers.

However in this case, the semantic meaning is inherent in the
name of the C99-addressable fields, and that means duplication
of information, and only makes the code hard to maintain since
you every time have to add a new #define AND update the site
where it is to be used.

Get rid of the #defines and just open code the values into the
appropriate struct elements. Make sure to explicitly address
the .hz and .value fields in the st_sensor_odr_avl struct
so that the meaning of all values is clear.

This patch is purely syntactic should have no semantic effect.

Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

1 files changed, 206 insertions, 396 deletions

diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index bdb619a..f6b6d42 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -43,200 +43,6 @@
 #define ST_ACCEL_FS_AVL_200G			200
 #define ST_ACCEL_FS_AVL_400G			400
 
-/* CUSTOM VALUES FOR SENSOR 1 */
-#define ST_ACCEL_1_WAI_EXP			0x33
-#define ST_ACCEL_1_ODR_ADDR			0x20
-#define ST_ACCEL_1_ODR_MASK			0xf0
-#define ST_ACCEL_1_ODR_AVL_1HZ_VAL		0x01
-#define ST_ACCEL_1_ODR_AVL_10HZ_VAL		0x02
-#define ST_ACCEL_1_ODR_AVL_25HZ_VAL		0x03
-#define ST_ACCEL_1_ODR_AVL_50HZ_VAL		0x04
-#define ST_ACCEL_1_ODR_AVL_100HZ_VAL		0x05
-#define ST_ACCEL_1_ODR_AVL_200HZ_VAL		0x06
-#define ST_ACCEL_1_ODR_AVL_400HZ_VAL		0x07
-#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL		0x08
-#define ST_ACCEL_1_FS_ADDR			0x23
-#define ST_ACCEL_1_FS_MASK			0x30
-#define ST_ACCEL_1_FS_AVL_2_VAL			0x00
-#define ST_ACCEL_1_FS_AVL_4_VAL			0x01
-#define ST_ACCEL_1_FS_AVL_8_VAL			0x02
-#define ST_ACCEL_1_FS_AVL_16_VAL		0x03
-#define ST_ACCEL_1_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(1000)
-#define ST_ACCEL_1_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(2000)
-#define ST_ACCEL_1_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(4000)
-#define ST_ACCEL_1_FS_AVL_16_GAIN		IIO_G_TO_M_S_2(12000)
-#define ST_ACCEL_1_BDU_ADDR			0x23
-#define ST_ACCEL_1_BDU_MASK			0x80
-#define ST_ACCEL_1_DRDY_IRQ_ADDR		0x22
-#define ST_ACCEL_1_DRDY_IRQ_INT1_MASK		0x10
-#define ST_ACCEL_1_DRDY_IRQ_INT2_MASK		0x08
-#define ST_ACCEL_1_IHL_IRQ_ADDR			0x25
-#define ST_ACCEL_1_IHL_IRQ_MASK			0x02
-#define ST_ACCEL_1_MULTIREAD_BIT		true
-
-/* CUSTOM VALUES FOR SENSOR 2 */
-#define ST_ACCEL_2_WAI_EXP			0x32
-#define ST_ACCEL_2_ODR_ADDR			0x20
-#define ST_ACCEL_2_ODR_MASK			0x18
-#define ST_ACCEL_2_ODR_AVL_50HZ_VAL		0x00
-#define ST_ACCEL_2_ODR_AVL_100HZ_VAL		0x01
-#define ST_ACCEL_2_ODR_AVL_400HZ_VAL		0x02
-#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL		0x03
-#define ST_ACCEL_2_PW_ADDR			0x20
-#define ST_ACCEL_2_PW_MASK			0xe0
-#define ST_ACCEL_2_FS_ADDR			0x23
-#define ST_ACCEL_2_FS_MASK			0x30
-#define ST_ACCEL_2_FS_AVL_2_VAL			0X00
-#define ST_ACCEL_2_FS_AVL_4_VAL			0X01
-#define ST_ACCEL_2_FS_AVL_8_VAL			0x03
-#define ST_ACCEL_2_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(1000)
-#define ST_ACCEL_2_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(2000)
-#define ST_ACCEL_2_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(3900)
-#define ST_ACCEL_2_BDU_ADDR			0x23
-#define ST_ACCEL_2_BDU_MASK			0x80
-#define ST_ACCEL_2_DRDY_IRQ_ADDR		0x22
-#define ST_ACCEL_2_DRDY_IRQ_INT1_MASK		0x02
-#define ST_ACCEL_2_DRDY_IRQ_INT2_MASK		0x10
-#define ST_ACCEL_2_IHL_IRQ_ADDR			0x22
-#define ST_ACCEL_2_IHL_IRQ_MASK			0x80
-#define ST_ACCEL_2_OD_IRQ_ADDR			0x22
-#define ST_ACCEL_2_OD_IRQ_MASK			0x40
-#define ST_ACCEL_2_MULTIREAD_BIT		true
-
-/* CUSTOM VALUES FOR SENSOR 3 */
-#define ST_ACCEL_3_WAI_EXP			0x40
-#define ST_ACCEL_3_ODR_ADDR			0x20
-#define ST_ACCEL_3_ODR_MASK			0xf0
-#define ST_ACCEL_3_ODR_AVL_3HZ_VAL		0x01
-#define ST_ACCEL_3_ODR_AVL_6HZ_VAL		0x02
-#define ST_ACCEL_3_ODR_AVL_12HZ_VAL		0x03
-#define ST_ACCEL_3_ODR_AVL_25HZ_VAL		0x04
-#define ST_ACCEL_3_ODR_AVL_50HZ_VAL		0x05
-#define ST_ACCEL_3_ODR_AVL_100HZ_VAL		0x06
-#define ST_ACCEL_3_ODR_AVL_200HZ_VAL		0x07
-#define ST_ACCEL_3_ODR_AVL_400HZ_VAL		0x08
-#define ST_ACCEL_3_ODR_AVL_800HZ_VAL		0x09
-#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL		0x0a
-#define ST_ACCEL_3_FS_ADDR			0x24
-#define ST_ACCEL_3_FS_MASK			0x38
-#define ST_ACCEL_3_FS_AVL_2_VAL			0X00
-#define ST_ACCEL_3_FS_AVL_4_VAL			0X01
-#define ST_ACCEL_3_FS_AVL_6_VAL			0x02
-#define ST_ACCEL_3_FS_AVL_8_VAL			0x03
-#define ST_ACCEL_3_FS_AVL_16_VAL		0x04
-#define ST_ACCEL_3_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(61)
-#define ST_ACCEL_3_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(122)
-#define ST_ACCEL_3_FS_AVL_6_GAIN		IIO_G_TO_M_S_2(183)
-#define ST_ACCEL_3_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(244)
-#define ST_ACCEL_3_FS_AVL_16_GAIN		IIO_G_TO_M_S_2(732)
-#define ST_ACCEL_3_BDU_ADDR			0x20
-#define ST_ACCEL_3_BDU_MASK			0x08
-#define ST_ACCEL_3_DRDY_IRQ_ADDR		0x23
-#define ST_ACCEL_3_DRDY_IRQ_INT1_MASK		0x80
-#define ST_ACCEL_3_DRDY_IRQ_INT2_MASK		0x00
-#define ST_ACCEL_3_IHL_IRQ_ADDR			0x23
-#define ST_ACCEL_3_IHL_IRQ_MASK			0x40
-#define ST_ACCEL_3_IG1_EN_ADDR			0x23
-#define ST_ACCEL_3_IG1_EN_MASK			0x08
-#define ST_ACCEL_3_MULTIREAD_BIT		false
-
-/* CUSTOM VALUES FOR SENSOR 4 */
-#define ST_ACCEL_4_WAI_EXP			0x3a
-#define ST_ACCEL_4_ODR_ADDR			0x20
-#define ST_ACCEL_4_ODR_MASK			0x30 /* DF1 and DF0 */
-#define ST_ACCEL_4_ODR_AVL_40HZ_VAL		0x00
-#define ST_ACCEL_4_ODR_AVL_160HZ_VAL		0x01
-#define ST_ACCEL_4_ODR_AVL_640HZ_VAL		0x02
-#define ST_ACCEL_4_ODR_AVL_2560HZ_VAL		0x03
-#define ST_ACCEL_4_PW_ADDR			0x20
-#define ST_ACCEL_4_PW_MASK			0xc0
-#define ST_ACCEL_4_FS_ADDR			0x21
-#define ST_ACCEL_4_FS_MASK			0x80
-#define ST_ACCEL_4_FS_AVL_2_VAL			0X00
-#define ST_ACCEL_4_FS_AVL_6_VAL			0X01
-#define ST_ACCEL_4_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(1024)
-#define ST_ACCEL_4_FS_AVL_6_GAIN		IIO_G_TO_M_S_2(340)
-#define ST_ACCEL_4_BDU_ADDR			0x21
-#define ST_ACCEL_4_BDU_MASK			0x40
-#define ST_ACCEL_4_DRDY_IRQ_ADDR		0x21
-#define ST_ACCEL_4_DRDY_IRQ_INT1_MASK		0x04
-#define ST_ACCEL_4_MULTIREAD_BIT		true
-
-/* CUSTOM VALUES FOR SENSOR 5 */
-#define ST_ACCEL_5_WAI_EXP			0x3b
-#define ST_ACCEL_5_ODR_ADDR			0x20
-#define ST_ACCEL_5_ODR_MASK			0x80
-#define ST_ACCEL_5_ODR_AVL_100HZ_VAL		0x00
-#define ST_ACCEL_5_ODR_AVL_400HZ_VAL		0x01
-#define ST_ACCEL_5_PW_ADDR			0x20
-#define ST_ACCEL_5_PW_MASK			0x40
-#define ST_ACCEL_5_FS_ADDR			0x20
-#define ST_ACCEL_5_FS_MASK			0x20
-#define ST_ACCEL_5_FS_AVL_2_VAL			0X00
-#define ST_ACCEL_5_FS_AVL_8_VAL			0X01
-/* TODO: check these resulting gain settings, these are not in the datsheet */
-#define ST_ACCEL_5_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(18000)
-#define ST_ACCEL_5_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(72000)
-#define ST_ACCEL_5_DRDY_IRQ_ADDR		0x22
-#define ST_ACCEL_5_DRDY_IRQ_INT1_MASK		0x04
-#define ST_ACCEL_5_DRDY_IRQ_INT2_MASK		0x20
-#define ST_ACCEL_5_IHL_IRQ_ADDR			0x22
-#define ST_ACCEL_5_IHL_IRQ_MASK			0x80
-#define ST_ACCEL_5_OD_IRQ_ADDR			0x22
-#define ST_ACCEL_5_OD_IRQ_MASK			0x40
-#define ST_ACCEL_5_IG1_EN_ADDR			0x21
-#define ST_ACCEL_5_IG1_EN_MASK			0x08
-#define ST_ACCEL_5_MULTIREAD_BIT		false
-
-/* CUSTOM VALUES FOR SENSOR 6 */
-#define ST_ACCEL_6_WAI_EXP			0x32
-#define ST_ACCEL_6_ODR_ADDR			0x20
-#define ST_ACCEL_6_ODR_MASK			0x18
-#define ST_ACCEL_6_ODR_AVL_50HZ_VAL		0x00
-#define ST_ACCEL_6_ODR_AVL_100HZ_VAL		0x01
-#define ST_ACCEL_6_ODR_AVL_400HZ_VAL		0x02
-#define ST_ACCEL_6_ODR_AVL_1000HZ_VAL		0x03
-#define ST_ACCEL_6_PW_ADDR			0x20
-#define ST_ACCEL_6_PW_MASK			0x20
-#define ST_ACCEL_6_FS_ADDR			0x23
-#define ST_ACCEL_6_FS_MASK			0x30
-#define ST_ACCEL_6_FS_AVL_100_VAL		0x00
-#define ST_ACCEL_6_FS_AVL_200_VAL		0x01
-#define ST_ACCEL_6_FS_AVL_400_VAL		0x03
-#define ST_ACCEL_6_FS_AVL_100_GAIN		IIO_G_TO_M_S_2(49000)
-#define ST_ACCEL_6_FS_AVL_200_GAIN		IIO_G_TO_M_S_2(98000)
-#define ST_ACCEL_6_FS_AVL_400_GAIN		IIO_G_TO_M_S_2(195000)
-#define ST_ACCEL_6_BDU_ADDR			0x23
-#define ST_ACCEL_6_BDU_MASK			0x80
-#define ST_ACCEL_6_DRDY_IRQ_ADDR		0x22
-#define ST_ACCEL_6_DRDY_IRQ_INT1_MASK		0x02
-#define ST_ACCEL_6_DRDY_IRQ_INT2_MASK		0x10
-#define ST_ACCEL_6_IHL_IRQ_ADDR			0x22
-#define ST_ACCEL_6_IHL_IRQ_MASK			0x80
-#define ST_ACCEL_6_MULTIREAD_BIT		true
-
-/* CUSTOM VALUES FOR SENSOR 7 */
-#define ST_ACCEL_7_ODR_ADDR			0x20
-#define ST_ACCEL_7_ODR_MASK			0x30
-#define ST_ACCEL_7_ODR_AVL_280HZ_VAL		0x00
-#define ST_ACCEL_7_ODR_AVL_560HZ_VAL		0x01
-#define ST_ACCEL_7_ODR_AVL_1120HZ_VAL		0x02
-#define ST_ACCEL_7_ODR_AVL_4480HZ_VAL		0x03
-#define ST_ACCEL_7_PW_ADDR			0x20
-#define ST_ACCEL_7_PW_MASK			0xc0
-#define ST_ACCEL_7_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(488)
-#define ST_ACCEL_7_BDU_ADDR			0x21
-#define ST_ACCEL_7_BDU_MASK			0x40
-#define ST_ACCEL_7_DRDY_IRQ_ADDR		0x21
-#define ST_ACCEL_7_DRDY_IRQ_INT1_MASK		0x04
-#define ST_ACCEL_7_MULTIREAD_BIT		false
-
-/* CUSTOM VALUES FOR SENSOR 8 */
-#define ST_ACCEL_8_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(15600)
-#define ST_ACCEL_8_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(31200)
-#define ST_ACCEL_8_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(62500)
-#define ST_ACCEL_8_FS_AVL_16_GAIN		IIO_G_TO_M_S_2(187500)
-
 static const struct iio_chan_spec st_accel_8bit_channels[] = {
 	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
@@ -287,7 +93,7 @@ static const struct iio_chan_spec st_accel_16bit_channels[] = {
 
 static const struct st_sensor_settings st_accel_sensors_settings[] = {
 	{
-		.wai = ST_ACCEL_1_WAI_EXP,
+		.wai = 0x33,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LIS3DH_ACCEL_DEV_NAME,
@@ -300,22 +106,22 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_1_ODR_ADDR,
-			.mask = ST_ACCEL_1_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0xf0,
 			.odr_avl = {
-				{ 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
-				{ 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
-				{ 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
-				{ 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
-				{ 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
-				{ 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
-				{ 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
-				{ 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+				{ .hz = 1, .value = 0x01, },
+				{ .hz = 10, .value = 0x02, },
+				{ .hz = 25, .value = 0x03, },
+				{ .hz = 50, .value = 0x04, },
+				{ .hz = 100, .value = 0x05, },
+				{ .hz = 200, .value = 0x06, },
+				{ .hz = 400, .value = 0x07, },
+				{ .hz = 1600, .value = 0x08, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_1_ODR_ADDR,
-			.mask = ST_ACCEL_1_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0xf0,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
 		.enable_axis = {
@@ -323,48 +129,48 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_1_FS_ADDR,
-			.mask = ST_ACCEL_1_FS_MASK,
+			.addr = 0x23,
+			.mask = 0x30,
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.value = ST_ACCEL_1_FS_AVL_2_VAL,
-					.gain = ST_ACCEL_1_FS_AVL_2_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(1000),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_4G,
-					.value = ST_ACCEL_1_FS_AVL_4_VAL,
-					.gain = ST_ACCEL_1_FS_AVL_4_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(2000),
 				},
 				[2] = {
 					.num = ST_ACCEL_FS_AVL_8G,
-					.value = ST_ACCEL_1_FS_AVL_8_VAL,
-					.gain = ST_ACCEL_1_FS_AVL_8_GAIN,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(4000),
 				},
 				[3] = {
 					.num = ST_ACCEL_FS_AVL_16G,
-					.value = ST_ACCEL_1_FS_AVL_16_VAL,
-					.gain = ST_ACCEL_1_FS_AVL_16_GAIN,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(12000),
 				},
 			},
 		},
 		.bdu = {
-			.addr = ST_ACCEL_1_BDU_ADDR,
-			.mask = ST_ACCEL_1_BDU_MASK,
+			.addr = 0x23,
+			.mask = 0x80,
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR,
-			.mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK,
+			.addr = 0x22,
+			.mask_int1 = 0x10,
+			.mask_int2 = 0x08,
+			.addr_ihl = 0x25,
+			.mask_ihl = 0x02,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+		.multi_read_bit = true,
 		.bootime = 2,
 	},
 	{
-		.wai = ST_ACCEL_2_WAI_EXP,
+		.wai = 0x32,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LIS331DLH_ACCEL_DEV_NAME,
@@ -374,18 +180,18 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_2_ODR_ADDR,
-			.mask = ST_ACCEL_2_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0x18,
 			.odr_avl = {
-				{ 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
-				{ 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
-				{ 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
-				{ 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
+				{ .hz = 50, .value = 0x00, },
+				{ .hz = 100, .value = 0x01, },
+				{ .hz = 400, .value = 0x02, },
+				{ .hz = 1000, .value = 0x03, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_2_PW_ADDR,
-			.mask = ST_ACCEL_2_PW_MASK,
+			.addr = 0x20,
+			.mask = 0xe0,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
@@ -394,69 +200,69 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_2_FS_ADDR,
-			.mask = ST_ACCEL_2_FS_MASK,
+			.addr = 0x23,
+			.mask = 0x30,
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.value = ST_ACCEL_2_FS_AVL_2_VAL,
-					.gain = ST_ACCEL_2_FS_AVL_2_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(1000),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_4G,
-					.value = ST_ACCEL_2_FS_AVL_4_VAL,
-					.gain = ST_ACCEL_2_FS_AVL_4_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(2000),
 				},
 				[2] = {
 					.num = ST_ACCEL_FS_AVL_8G,
-					.value = ST_ACCEL_2_FS_AVL_8_VAL,
-					.gain = ST_ACCEL_2_FS_AVL_8_GAIN,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(3900),
 				},
 			},
 		},
 		.bdu = {
-			.addr = ST_ACCEL_2_BDU_ADDR,
-			.mask = ST_ACCEL_2_BDU_MASK,
+			.addr = 0x23,
+			.mask = 0x80,
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_ACCEL_2_IHL_IRQ_ADDR,
-			.mask_ihl = ST_ACCEL_2_IHL_IRQ_MASK,
-			.addr_od = ST_ACCEL_2_OD_IRQ_ADDR,
-			.mask_od = ST_ACCEL_2_OD_IRQ_MASK,
+			.addr = 0x22,
+			.mask_int1 = 0x02,
+			.mask_int2 = 0x10,
+			.addr_ihl = 0x22,
+			.mask_ihl = 0x80,
+			.addr_od = 0x22,
+			.mask_od = 0x40,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
+		.multi_read_bit = true,
 		.bootime = 2,
 	},
 	{
-		.wai = ST_ACCEL_3_WAI_EXP,
+		.wai = 0x40,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LSM330_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_3_ODR_ADDR,
-			.mask = ST_ACCEL_3_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0xf0,
 			.odr_avl = {
-				{ 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
-				{ 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
-				{ 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
-				{ 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
-				{ 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
-				{ 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
-				{ 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
-				{ 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
-				{ 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
-				{ 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
+				{ .hz = 3, .value = 0x01, },
+				{ .hz = 6, .value = 0x02, },
+				{ .hz = 12, .value = 0x03, },
+				{ .hz = 25, .value = 0x04, },
+				{ .hz = 50, .value = 0x05, },
+				{ .hz = 100, .value = 0x06, },
+				{ .hz = 200, .value = 0x07, },
+				{ .hz = 400, .value = 0x08, },
+				{ .hz = 800, .value = 0x09, },
+				{ .hz = 1600, .value = 0x0a, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_3_ODR_ADDR,
-			.mask = ST_ACCEL_3_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0xf0,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
 		.enable_axis = {
@@ -464,75 +270,75 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_3_FS_ADDR,
-			.mask = ST_ACCEL_3_FS_MASK,
+			.addr = 0x24,
+			.mask = 0x38,
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.value = ST_ACCEL_3_FS_AVL_2_VAL,
-					.gain = ST_ACCEL_3_FS_AVL_2_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(61),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_4G,
-					.value = ST_ACCEL_3_FS_AVL_4_VAL,
-					.gain = ST_ACCEL_3_FS_AVL_4_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(122),
 				},
 				[2] = {
 					.num = ST_ACCEL_FS_AVL_6G,
-					.value = ST_ACCEL_3_FS_AVL_6_VAL,
-					.gain = ST_ACCEL_3_FS_AVL_6_GAIN,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(183),
 				},
 				[3] = {
 					.num = ST_ACCEL_FS_AVL_8G,
-					.value = ST_ACCEL_3_FS_AVL_8_VAL,
-					.gain = ST_ACCEL_3_FS_AVL_8_GAIN,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(244),
 				},
 				[4] = {
 					.num = ST_ACCEL_FS_AVL_16G,
-					.value = ST_ACCEL_3_FS_AVL_16_VAL,
-					.gain = ST_ACCEL_3_FS_AVL_16_GAIN,
+					.value = 0x04,
+					.gain = IIO_G_TO_M_S_2(732),
 				},
 			},
 		},
 		.bdu = {
-			.addr = ST_ACCEL_3_BDU_ADDR,
-			.mask = ST_ACCEL_3_BDU_MASK,
+			.addr = 0x20,
+			.mask = 0x08,
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_ACCEL_3_IHL_IRQ_ADDR,
-			.mask_ihl = ST_ACCEL_3_IHL_IRQ_MASK,
+			.addr = 0x23,
+			.mask_int1 = 0x80,
+			.mask_int2 = 0x00,
+			.addr_ihl = 0x23,
+			.mask_ihl = 0x40,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 			.ig1 = {
-				.en_addr = ST_ACCEL_3_IG1_EN_ADDR,
-				.en_mask = ST_ACCEL_3_IG1_EN_MASK,
+				.en_addr = 0x23,
+				.en_mask = 0x08,
 			},
 		},
-		.multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
+		.multi_read_bit = false,
 		.bootime = 2,
 	},
 	{
-		.wai = ST_ACCEL_4_WAI_EXP,
+		.wai = 0x3a,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LIS3LV02DL_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_4_ODR_ADDR,
-			.mask = ST_ACCEL_4_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0x30, /* DF1 and DF0 */
 			.odr_avl = {
-				{ 40, ST_ACCEL_4_ODR_AVL_40HZ_VAL },
-				{ 160, ST_ACCEL_4_ODR_AVL_160HZ_VAL, },
-				{ 640, ST_ACCEL_4_ODR_AVL_640HZ_VAL, },
-				{ 2560, ST_ACCEL_4_ODR_AVL_2560HZ_VAL, },
+				{ .hz = 40, .value = 0x00, },
+				{ .hz = 160, .value = 0x01, },
+				{ .hz = 640, .value = 0x02, },
+				{ .hz = 2560, .value = 0x03, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_4_PW_ADDR,
-			.mask = ST_ACCEL_4_PW_MASK,
+			.addr = 0x20,
+			.mask = 0xc0,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
@@ -541,51 +347,51 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_4_FS_ADDR,
-			.mask = ST_ACCEL_4_FS_MASK,
+			.addr = 0x21,
+			.mask = 0x80,
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.value = ST_ACCEL_4_FS_AVL_2_VAL,
-					.gain = ST_ACCEL_4_FS_AVL_2_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(1024),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_6G,
-					.value = ST_ACCEL_4_FS_AVL_6_VAL,
-					.gain = ST_ACCEL_4_FS_AVL_6_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(340),
 				},
 			},
 		},
 		.bdu = {
-			.addr = ST_ACCEL_4_BDU_ADDR,
-			.mask = ST_ACCEL_4_BDU_MASK,
+			.addr = 0x21,
+			.mask = 0x40,
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_4_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_4_DRDY_IRQ_INT1_MASK,
+			.addr = 0x21,
+			.mask_int1 = 0x04,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT,
+		.multi_read_bit = true,
 		.bootime = 2, /* guess */
 	},
 	{
-		.wai = ST_ACCEL_5_WAI_EXP,
+		.wai = 0x3b,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LIS331DL_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_8bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_5_ODR_ADDR,
-			.mask = ST_ACCEL_5_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0x80,
 			.odr_avl = {
-				{ 100, ST_ACCEL_5_ODR_AVL_100HZ_VAL },
-				{ 400, ST_ACCEL_5_ODR_AVL_400HZ_VAL, },
+				{ .hz = 100, .value = 0x00, },
+				{ .hz = 400, .value = 0x01, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_5_PW_ADDR,
-			.mask = ST_ACCEL_5_PW_MASK,
+			.addr = 0x20,
+			.mask = 0x40,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
@@ -594,54 +400,58 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_5_FS_ADDR,
-			.mask = ST_ACCEL_5_FS_MASK,
+			.addr = 0x20,
+			.mask = 0x20,
+			/*
+			 * TODO: check these resulting gain settings, these are
+			 * not in the datsheet
+			 */
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.value = ST_ACCEL_5_FS_AVL_2_VAL,
-					.gain = ST_ACCEL_5_FS_AVL_2_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(18000),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_8G,
-					.value = ST_ACCEL_5_FS_AVL_8_VAL,
-					.gain = ST_ACCEL_5_FS_AVL_8_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(72000),
 				},
 			},
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_5_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_5_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_ACCEL_5_IHL_IRQ_ADDR,
-			.mask_ihl = ST_ACCEL_5_IHL_IRQ_MASK,
-			.addr_od = ST_ACCEL_5_OD_IRQ_ADDR,
-			.mask_od = ST_ACCEL_5_OD_IRQ_MASK,
+			.addr = 0x22,
+			.mask_int1 = 0x04,
+			.mask_int2 = 0x20,
+			.addr_ihl = 0x22,
+			.mask_ihl = 0x80,
+			.addr_od = 0x22,
+			.mask_od = 0x40,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT,
+		.multi_read_bit = false,
 		.bootime = 2, /* guess */
 	},
 	{
-		.wai = ST_ACCEL_6_WAI_EXP,
+		.wai = 0x32,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = H3LIS331DL_DRIVER_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_6_ODR_ADDR,
-			.mask = ST_ACCEL_6_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0x18,
 			.odr_avl = {
-				{ 50, ST_ACCEL_6_ODR_AVL_50HZ_VAL },
-				{ 100, ST_ACCEL_6_ODR_AVL_100HZ_VAL, },
-				{ 400, ST_ACCEL_6_ODR_AVL_400HZ_VAL, },
-				{ 1000, ST_ACCEL_6_ODR_AVL_1000HZ_VAL, },
+				{ .hz = 50, .value = 0x00, },
+				{ .hz = 100, .value = 0x01, },
+				{ .hz = 400, .value = 0x02, },
+				{ .hz = 1000, .value = 0x03, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_6_PW_ADDR,
-			.mask = ST_ACCEL_6_PW_MASK,
+			.addr = 0x20,
+			.mask = 0x20,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
@@ -650,38 +460,38 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_6_FS_ADDR,
-			.mask = ST_ACCEL_6_FS_MASK,
+			.addr = 0x23,
+			.mask = 0x30,
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_100G,
-					.value = ST_ACCEL_6_FS_AVL_100_VAL,
-					.gain = ST_ACCEL_6_FS_AVL_100_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(49000),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_200G,
-					.value = ST_ACCEL_6_FS_AVL_200_VAL,
-					.gain = ST_ACCEL_6_FS_AVL_200_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(98000),
 				},
 				[2] = {
 					.num = ST_ACCEL_FS_AVL_400G,
-					.value = ST_ACCEL_6_FS_AVL_400_VAL,
-					.gain = ST_ACCEL_6_FS_AVL_400_GAIN,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(195000),
 				},
 			},
 		},
 		.bdu = {
-			.addr = ST_ACCEL_6_BDU_ADDR,
-			.mask = ST_ACCEL_6_BDU_MASK,
+			.addr = 0x23,
+			.mask = 0x80,
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_6_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_6_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_ACCEL_6_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_ACCEL_6_IHL_IRQ_ADDR,
-			.mask_ihl = ST_ACCEL_6_IHL_IRQ_MASK,
+			.addr = 0x22,
+			.mask_int1 = 0x02,
+			.mask_int2 = 0x10,
+			.addr_ihl = 0x22,
+			.mask_ihl = 0x80,
 		},
-		.multi_read_bit = ST_ACCEL_6_MULTIREAD_BIT,
+		.multi_read_bit = true,
 		.bootime = 2,
 	},
 	{
@@ -691,18 +501,18 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_7_ODR_ADDR,
-			.mask = ST_ACCEL_7_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0x30,
 			.odr_avl = {
-				{ 280, ST_ACCEL_7_ODR_AVL_280HZ_VAL, },
-				{ 560, ST_ACCEL_7_ODR_AVL_560HZ_VAL, },
-				{ 1120, ST_ACCEL_7_ODR_AVL_1120HZ_VAL, },
-				{ 4480, ST_ACCEL_7_ODR_AVL_4480HZ_VAL, },
+				{ .hz = 280, .value = 0x00, },
+				{ .hz = 560, .value = 0x01, },
+				{ .hz = 1120, .value = 0x02, },
+				{ .hz = 4480, .value = 0x03, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_7_PW_ADDR,
-			.mask = ST_ACCEL_7_PW_MASK,
+			.addr = 0x20,
+			.mask = 0xc0,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
@@ -714,7 +524,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.gain = ST_ACCEL_7_FS_AVL_2_GAIN,
+					.gain = IIO_G_TO_M_S_2(488),
 				},
 			},
 		},
@@ -725,37 +535,37 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		.bdu = {
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_7_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_7_DRDY_IRQ_INT1_MASK,
+			.addr = 0x21,
+			.mask_int1 = 0x04,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_ACCEL_7_MULTIREAD_BIT,
+		.multi_read_bit = false,
 		.bootime = 2,
 	},
 	{
-		.wai = ST_ACCEL_1_WAI_EXP,
+		.wai = 0x33,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LNG2DM_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_8bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_1_ODR_ADDR,
-			.mask = ST_ACCEL_1_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0xf0,
 			.odr_avl = {
-				{ 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
-				{ 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
-				{ 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
-				{ 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
-				{ 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
-				{ 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
-				{ 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
-				{ 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+				{ .hz = 1, .value = 0x01, },
+				{ .hz = 10, .value = 0x02, },
+				{ .hz = 25, .value = 0x03, },
+				{ .hz = 50, .value = 0x04, },
+				{ .hz = 100, .value = 0x05, },
+				{ .hz = 200, .value = 0x06, },
+				{ .hz = 400, .value = 0x07, },
+				{ .hz = 1600, .value = 0x08, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_1_ODR_ADDR,
-			.mask = ST_ACCEL_1_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0xf0,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
 		.enable_axis = {
@@ -763,40 +573,40 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_1_FS_ADDR,
-			.mask = ST_ACCEL_1_FS_MASK,
+			.addr = 0x23,
+			.mask = 0x30,
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.value = ST_ACCEL_1_FS_AVL_2_VAL,
-					.gain = ST_ACCEL_8_FS_AVL_2_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(15600),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_4G,
-					.value = ST_ACCEL_1_FS_AVL_4_VAL,
-					.gain = ST_ACCEL_8_FS_AVL_4_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(31200),
 				},
 				[2] = {
 					.num = ST_ACCEL_FS_AVL_8G,
-					.value = ST_ACCEL_1_FS_AVL_8_VAL,
-					.gain = ST_ACCEL_8_FS_AVL_8_GAIN,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(62500),
 				},
 				[3] = {
 					.num = ST_ACCEL_FS_AVL_16G,
-					.value = ST_ACCEL_1_FS_AVL_16_VAL,
-					.gain = ST_ACCEL_8_FS_AVL_16_GAIN,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(187500),
 				},
 			},
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR,
-			.mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK,
+			.addr = 0x22,
+			.mask_int1 = 0x10,
+			.mask_int2 = 0x08,
+			.addr_ihl = 0x25,
+			.mask_ihl = 0x02,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+		.multi_read_bit = true,
 		.bootime = 2,
 	},
 };