staging:iio:adis16130: Move out of staging

The adis16130 driver is fairly simple and it a good shape now, so move it out of
staging. Remove an outdated FIXME along the way.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

3 files changed, 215 insertions, 0 deletions

diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index b8daf1b..8498e9d 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -10,6 +10,13 @@ config ADIS16080
 	  Say yes here to build support for Analog Devices ADIS16080, ADIS16100 Yaw
 	  Rate Gyroscope with SPI.
 
+config ADIS16130
+	tristate "Analog Devices ADIS16130 High Precision Angular Rate Sensor driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices ADIS16130 High Precision
+	  Angular Rate Sensor driver.
+
 config ADIS16136
 	tristate "Analog devices ADIS16136 and similar gyroscopes driver"
 	depends on SPI_MASTER
diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
index 225d289..e9dc034 100644
--- a/drivers/iio/gyro/Makefile
+++ b/drivers/iio/gyro/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_ADIS16080) += adis16080.o
+obj-$(CONFIG_ADIS16130) += adis16130.o
 obj-$(CONFIG_ADIS16136) += adis16136.o
 obj-$(CONFIG_ADXRS450) += adxrs450.o
 
diff --git a/drivers/iio/gyro/adis16130.c b/drivers/iio/gyro/adis16130.c
new file mode 100644
index 0000000..129acdf
--- /dev/null
+++ b/drivers/iio/gyro/adis16130.c
@@ -0,0 +1,207 @@
+/*
+ * ADIS16130 Digital Output, High Precision Angular Rate Sensor driver
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/mutex.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+
+#define ADIS16130_CON         0x0
+#define ADIS16130_CON_RD      (1 << 6)
+#define ADIS16130_IOP         0x1
+
+/* 1 = data-ready signal low when unread data on all channels; */
+#define ADIS16130_IOP_ALL_RDY (1 << 3)
+#define ADIS16130_IOP_SYNC    (1 << 0) /* 1 = synchronization enabled */
+#define ADIS16130_RATEDATA    0x8 /* Gyroscope output, rate of rotation */
+#define ADIS16130_TEMPDATA    0xA /* Temperature output */
+#define ADIS16130_RATECS      0x28 /* Gyroscope channel setup */
+#define ADIS16130_RATECS_EN   (1 << 3) /* 1 = channel enable; */
+#define ADIS16130_TEMPCS      0x2A /* Temperature channel setup */
+#define ADIS16130_TEMPCS_EN   (1 << 3)
+#define ADIS16130_RATECONV    0x30
+#define ADIS16130_TEMPCONV    0x32
+#define ADIS16130_MODE        0x38
+#define ADIS16130_MODE_24BIT  (1 << 1) /* 1 = 24-bit resolution; */
+
+/**
+ * struct adis16130_state - device instance specific data
+ * @us:			actual spi_device to write data
+ * @buf_lock:		mutex to protect tx and rx
+ * @buf:		unified tx/rx buffer
+ **/
+struct adis16130_state {
+	struct spi_device		*us;
+	struct mutex			buf_lock;
+	u8				buf[4] ____cacheline_aligned;
+};
+
+static int adis16130_spi_read(struct iio_dev *indio_dev, u8 reg_addr, u32 *val)
+{
+	int ret;
+	struct adis16130_state *st = iio_priv(indio_dev);
+	struct spi_message msg;
+	struct spi_transfer xfer = {
+		.tx_buf = st->buf,
+		.rx_buf = st->buf,
+		.len = 4,
+	};
+
+	mutex_lock(&st->buf_lock);
+
+	st->buf[0] = ADIS16130_CON_RD | reg_addr;
+	st->buf[1] = st->buf[2] = st->buf[3] = 0;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+	ret = spi_sync(st->us, &msg);
+
+	if (ret == 0)
+		*val = (st->buf[1] << 16) | (st->buf[2] << 8) | st->buf[3];
+	mutex_unlock(&st->buf_lock);
+
+	return ret;
+}
+
+static int adis16130_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2,
+			      long mask)
+{
+	int ret;
+	u32 temp;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		/* Take the iio_dev status lock */
+		mutex_lock(&indio_dev->mlock);
+		ret = adis16130_spi_read(indio_dev, chan->address, &temp);
+		mutex_unlock(&indio_dev->mlock);
+		if (ret)
+			return ret;
+		*val = temp;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			/* 0 degree = 838860, 250 degree = 14260608 */
+			*val = 250;
+			*val2 = 336440817; /* RAD_TO_DEGREE(14260608 - 8388608) */
+			return IIO_VAL_FRACTIONAL;
+		case IIO_TEMP:
+			/* 0C = 8036283, 105C = 9516048 */
+			*val = 105000;
+			*val2 = 9516048 - 8036283;
+			return IIO_VAL_FRACTIONAL;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case IIO_CHAN_INFO_OFFSET:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = -8388608;
+			return IIO_VAL_INT;
+		case IIO_TEMP:
+			*val = -8036283;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_chan_spec adis16130_channels[] = {
+	{
+		.type = IIO_ANGL_VEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Z,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OFFSET),
+		.address = ADIS16130_RATEDATA,
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OFFSET),
+		.address = ADIS16130_TEMPDATA,
+	}
+};
+
+static const struct iio_info adis16130_info = {
+	.read_raw = &adis16130_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static int adis16130_probe(struct spi_device *spi)
+{
+	int ret;
+	struct adis16130_state *st;
+	struct iio_dev *indio_dev;
+
+	/* setup the industrialio driver allocated elements */
+	indio_dev = iio_device_alloc(sizeof(*st));
+	if (indio_dev == NULL) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	st = iio_priv(indio_dev);
+	/* this is only used for removal purposes */
+	spi_set_drvdata(spi, indio_dev);
+	st->us = spi;
+	mutex_init(&st->buf_lock);
+	indio_dev->name = spi->dev.driver->name;
+	indio_dev->channels = adis16130_channels;
+	indio_dev->num_channels = ARRAY_SIZE(adis16130_channels);
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->info = &adis16130_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_free_dev;
+
+	return 0;
+
+error_free_dev:
+	iio_device_free(indio_dev);
+
+error_ret:
+	return ret;
+}
+
+static int adis16130_remove(struct spi_device *spi)
+{
+	iio_device_unregister(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
+
+	return 0;
+}
+
+static struct spi_driver adis16130_driver = {
+	.driver = {
+		.name = "adis16130",
+		.owner = THIS_MODULE,
+	},
+	.probe = adis16130_probe,
+	.remove = adis16130_remove,
+};
+module_spi_driver(adis16130_driver);
+
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_DESCRIPTION("Analog Devices ADIS16130 High Precision Angular Rate");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("spi:adis16130");