diff options
| author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-09-25 08:59:04 -0700 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-09-25 08:59:04 -0700 |
| commit | e2aad1d5716c5f7fa5deb4a96e6b6a4e9f24e78b (patch) | |
| tree | 389fbdf161a3c28c9b2f98fdc1ccd89d474ef884 /drivers/iio/adc/at91_adc.c | |
| parent | 3ffdea3feca9e2c95c2e93e217d77c9c368f747a (diff) | |
| parent | 4a10c2ac2f368583138b774ca41fac4207911983 (diff) | |
| download | op-kernel-dev-e2aad1d5716c5f7fa5deb4a96e6b6a4e9f24e78b.zip op-kernel-dev-e2aad1d5716c5f7fa5deb4a96e6b6a4e9f24e78b.tar.gz | |
Merge 3.12-rc2 into staging-next.
This resolves the merge problem with two iio drivers that Stephen
Rothwell pointed out.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/iio/adc/at91_adc.c')
| -rw-r--r-- | drivers/iio/adc/at91_adc.c | 11 |
1 files changed, 6 insertions, 5 deletions
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 5c8f690..78121949 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -550,7 +550,7 @@ static const struct iio_info at91_adc_info = { static int at91_adc_probe(struct platform_device *pdev) { - unsigned int prsc, mstrclk, ticks, adc_clk, shtim; + unsigned int prsc, mstrclk, ticks, adc_clk, adc_clk_khz, shtim; int ret; struct iio_dev *idev; struct at91_adc_state *st; @@ -643,6 +643,7 @@ static int at91_adc_probe(struct platform_device *pdev) */ mstrclk = clk_get_rate(st->clk); adc_clk = clk_get_rate(st->adc_clk); + adc_clk_khz = adc_clk / 1000; prsc = (mstrclk / (2 * adc_clk)) - 1; if (!st->startup_time) { @@ -656,15 +657,15 @@ static int at91_adc_probe(struct platform_device *pdev) * defined in the electrical characteristics of the board, divided by 8. * The formula thus is : Startup Time = (ticks + 1) * 8 / ADC Clock */ - ticks = round_up((st->startup_time * adc_clk / - 1000000) - 1, 8) / 8; + ticks = round_up((st->startup_time * adc_clk_khz / + 1000) - 1, 8) / 8; /* * a minimal Sample and Hold Time is necessary for the ADC to guarantee * the best converted final value between two channels selection * The formula thus is : Sample and Hold Time = (shtim + 1) / ADCClock */ - shtim = round_up((st->sample_hold_time * adc_clk / - 1000000) - 1, 1); + shtim = round_up((st->sample_hold_time * adc_clk_khz / + 1000) - 1, 1); reg = AT91_ADC_PRESCAL_(prsc) & st->registers->mr_prescal_mask; reg |= AT91_ADC_STARTUP_(ticks) & st->registers->mr_startup_mask; |
