diff options
author | Len Brown <len.brown@intel.com> | 2006-01-07 03:50:18 -0500 |
---|---|---|
committer | Len Brown <len.brown@intel.com> | 2006-01-07 03:50:18 -0500 |
commit | ed03f430cdc8c802652467e9097606fedc2c7abc (patch) | |
tree | 30941ec1e6f93e99358fefe18175e5dd800a4379 /drivers/ieee1394/sbp2.c | |
parent | ed349a8a0a780ed27e2a765f16cee54d9b63bfee (diff) | |
parent | 6f957eaf79356a32e838f5f262ee9a60544b1d5b (diff) | |
download | op-kernel-dev-ed03f430cdc8c802652467e9097606fedc2c7abc.zip op-kernel-dev-ed03f430cdc8c802652467e9097606fedc2c7abc.tar.gz |
Pull pnpacpi into acpica branch
Diffstat (limited to 'drivers/ieee1394/sbp2.c')
-rw-r--r-- | drivers/ieee1394/sbp2.c | 1040 |
1 files changed, 400 insertions, 640 deletions
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index f7e18cc..18d7eda 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -80,9 +80,6 @@ #include "ieee1394_transactions.h" #include "sbp2.h" -static char version[] __devinitdata = - "$Rev: 1306 $ Ben Collins <bcollins@debian.org>"; - /* * Module load parameter definitions */ @@ -151,18 +148,15 @@ static int force_inquiry_hack; module_param(force_inquiry_hack, int, 0444); MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)"); - /* * Export information about protocols/devices supported by this driver. */ static struct ieee1394_device_id sbp2_id_table[] = { { - .match_flags =IEEE1394_MATCH_SPECIFIER_ID | - IEEE1394_MATCH_VERSION, - .specifier_id = SBP2_UNIT_SPEC_ID_ENTRY & 0xffffff, - .version = SBP2_SW_VERSION_ENTRY & 0xffffff - }, - { } + .match_flags = IEEE1394_MATCH_SPECIFIER_ID | IEEE1394_MATCH_VERSION, + .specifier_id = SBP2_UNIT_SPEC_ID_ENTRY & 0xffffff, + .version = SBP2_SW_VERSION_ENTRY & 0xffffff}, + {} }; MODULE_DEVICE_TABLE(ieee1394, sbp2_id_table); @@ -221,7 +215,6 @@ static u32 global_outstanding_dmas = 0; #define SBP2_ERR(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args) - /* * Globals */ @@ -254,8 +247,8 @@ static struct hpsb_address_ops sbp2_ops = { #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA static struct hpsb_address_ops sbp2_physdma_ops = { - .read = sbp2_handle_physdma_read, - .write = sbp2_handle_physdma_write, + .read = sbp2_handle_physdma_read, + .write = sbp2_handle_physdma_write, }; #endif @@ -287,7 +280,6 @@ static u32 sbp2_broken_inquiry_list[] = { * General utility functions **************************************/ - #ifndef __BIG_ENDIAN /* * Converts a buffer from be32 to cpu byte ordering. Length is in bytes. @@ -324,7 +316,8 @@ static __inline__ void sbp2util_cpu_to_be32_buffer(void *buffer, int length) /* * Debug packet dump routine. Length is in bytes. */ -static void sbp2util_packet_dump(void *buffer, int length, char *dump_name, u32 dump_phys_addr) +static void sbp2util_packet_dump(void *buffer, int length, char *dump_name, + u32 dump_phys_addr) { int i; unsigned char *dump = buffer; @@ -345,7 +338,7 @@ static void sbp2util_packet_dump(void *buffer, int length, char *dump_name, u32 printk(" "); if ((i & 0xf) == 0) printk("\n "); - printk("%02x ", (int) dump[i]); + printk("%02x ", (int)dump[i]); } printk("\n"); @@ -364,9 +357,9 @@ static int sbp2util_down_timeout(atomic_t *done, int timeout) for (i = timeout; (i > 0 && atomic_read(done) == 0); i-= HZ/10) { if (msleep_interruptible(100)) /* 100ms */ - return(1); + return 1; } - return ((i > 0) ? 0:1); + return (i > 0) ? 0 : 1; } /* Free's an allocated packet */ @@ -380,21 +373,22 @@ static void sbp2_free_packet(struct hpsb_packet *packet) * subaction and returns immediately. Can be used from interrupts. */ static int sbp2util_node_write_no_wait(struct node_entry *ne, u64 addr, - quadlet_t *buffer, size_t length) + quadlet_t *buffer, size_t length) { struct hpsb_packet *packet; packet = hpsb_make_writepacket(ne->host, ne->nodeid, addr, buffer, length); - if (!packet) - return -ENOMEM; + if (!packet) + return -ENOMEM; - hpsb_set_packet_complete_task(packet, (void (*)(void*))sbp2_free_packet, + hpsb_set_packet_complete_task(packet, + (void (*)(void *))sbp2_free_packet, packet); hpsb_node_fill_packet(ne, packet); - if (hpsb_send_packet(packet) < 0) { + if (hpsb_send_packet(packet) < 0) { sbp2_free_packet(packet); return -EIO; } @@ -417,22 +411,22 @@ static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_i spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); for (i = 0; i < orbs; i++) { - command = (struct sbp2_command_info *) - kmalloc(sizeof(struct sbp2_command_info), GFP_ATOMIC); + command = kzalloc(sizeof(*command), GFP_ATOMIC); if (!command) { - spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); - return(-ENOMEM); + spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, + flags); + return -ENOMEM; } - memset(command, '\0', sizeof(struct sbp2_command_info)); command->command_orb_dma = - pci_map_single (hi->host->pdev, &command->command_orb, - sizeof(struct sbp2_command_orb), - PCI_DMA_BIDIRECTIONAL); + pci_map_single(hi->host->pdev, &command->command_orb, + sizeof(struct sbp2_command_orb), + PCI_DMA_BIDIRECTIONAL); SBP2_DMA_ALLOC("single command orb DMA"); command->sge_dma = - pci_map_single (hi->host->pdev, &command->scatter_gather_element, - sizeof(command->scatter_gather_element), - PCI_DMA_BIDIRECTIONAL); + pci_map_single(hi->host->pdev, + &command->scatter_gather_element, + sizeof(command->scatter_gather_element), + PCI_DMA_BIDIRECTIONAL); SBP2_DMA_ALLOC("scatter_gather_element"); INIT_LIST_HEAD(&command->list); list_add_tail(&command->list, &scsi_id->sbp2_command_orb_completed); @@ -488,7 +482,7 @@ static struct sbp2_command_info *sbp2util_find_command_for_orb( list_for_each_entry(command, &scsi_id->sbp2_command_orb_inuse, list) { if (command->command_orb_dma == orb) { spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); - return (command); + return command; } } } @@ -496,7 +490,7 @@ static struct sbp2_command_info *sbp2util_find_command_for_orb( SBP2_ORB_DEBUG("could not match command orb %x", (unsigned int)orb); - return(NULL); + return NULL; } /* @@ -513,12 +507,12 @@ static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_ list_for_each_entry(command, &scsi_id->sbp2_command_orb_inuse, list) { if (command->Current_SCpnt == SCpnt) { spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); - return (command); + return command; } } } spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); - return(NULL); + return NULL; } /* @@ -545,7 +539,7 @@ static struct sbp2_command_info *sbp2util_allocate_command_orb( SBP2_ERR("sbp2util_allocate_command_orb - No orbs available!"); } spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); - return (command); + return command; } /* Free our DMA's */ @@ -587,7 +581,8 @@ static void sbp2util_free_command_dma(struct sbp2_command_info *command) /* * This function moves a command to the completed orb list. */ -static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id, struct sbp2_command_info *command) +static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id, + struct sbp2_command_info *command) { unsigned long flags; @@ -606,8 +601,6 @@ static inline int sbp2util_node_is_available(struct scsi_id_instance_data *scsi_ return scsi_id && scsi_id->ne && !scsi_id->ne->in_limbo; } - - /********************************************* * IEEE-1394 core driver stack related section *********************************************/ @@ -627,14 +620,14 @@ static int sbp2_probe(struct device *dev) if (ud->flags & UNIT_DIRECTORY_HAS_LUN_DIRECTORY) return -ENODEV; - scsi_id = sbp2_alloc_device(ud); + scsi_id = sbp2_alloc_device(ud); - if (!scsi_id) - return -ENOMEM; + if (!scsi_id) + return -ENOMEM; - sbp2_parse_unit_directory(scsi_id, ud); + sbp2_parse_unit_directory(scsi_id, ud); - return sbp2_start_device(scsi_id); + return sbp2_start_device(scsi_id); } static int sbp2_remove(struct device *dev) @@ -719,12 +712,11 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud SBP2_DEBUG("sbp2_alloc_device"); - scsi_id = kmalloc(sizeof(*scsi_id), GFP_KERNEL); + scsi_id = kzalloc(sizeof(*scsi_id), GFP_KERNEL); if (!scsi_id) { SBP2_ERR("failed to create scsi_id"); goto failed_alloc; } - memset(scsi_id, 0, sizeof(*scsi_id)); scsi_id->ne = ud->ne; scsi_id->ud = ud; @@ -735,7 +727,7 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_completed); INIT_LIST_HEAD(&scsi_id->scsi_list); spin_lock_init(&scsi_id->sbp2_command_orb_lock); - scsi_id->sbp2_device_type_and_lun = SBP2_DEVICE_TYPE_LUN_UNINITIALIZED; + scsi_id->sbp2_lun = 0; ud->device.driver_data = scsi_id; @@ -769,7 +761,7 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud /* Register our host with the SCSI stack. */ scsi_host = scsi_host_alloc(&scsi_driver_template, - sizeof (unsigned long)); + sizeof(unsigned long)); if (!scsi_host) { SBP2_ERR("failed to register scsi host"); goto failed_alloc; @@ -790,7 +782,6 @@ failed_alloc: return NULL; } - static void sbp2_host_reset(struct hpsb_host *host) { struct sbp2scsi_host_info *hi; @@ -804,7 +795,6 @@ static void sbp2_host_reset(struct hpsb_host *host) } } - /* * This function is where we first pull the node unique ids, and then * allocate memory and register a SBP-2 device. @@ -818,7 +808,8 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id) /* Login FIFO DMA */ scsi_id->login_response = - pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_login_response), + pci_alloc_consistent(hi->host->pdev, + sizeof(struct sbp2_login_response), &scsi_id->login_response_dma); if (!scsi_id->login_response) goto alloc_fail; @@ -826,7 +817,8 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id) /* Query logins ORB DMA */ scsi_id->query_logins_orb = - pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_query_logins_orb), + pci_alloc_consistent(hi->host->pdev, + sizeof(struct sbp2_query_logins_orb), &scsi_id->query_logins_orb_dma); if (!scsi_id->query_logins_orb) goto alloc_fail; @@ -834,7 +826,8 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id) /* Query logins response DMA */ scsi_id->query_logins_response = - pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_query_logins_response), + pci_alloc_consistent(hi->host->pdev, + sizeof(struct sbp2_query_logins_response), &scsi_id->query_logins_response_dma); if (!scsi_id->query_logins_response) goto alloc_fail; @@ -842,7 +835,8 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id) /* Reconnect ORB DMA */ scsi_id->reconnect_orb = - pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_reconnect_orb), + pci_alloc_consistent(hi->host->pdev, + sizeof(struct sbp2_reconnect_orb), &scsi_id->reconnect_orb_dma); if (!scsi_id->reconnect_orb) goto alloc_fail; @@ -850,7 +844,8 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id) /* Logout ORB DMA */ scsi_id->logout_orb = - pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_logout_orb), + pci_alloc_consistent(hi->host->pdev, + sizeof(struct sbp2_logout_orb), &scsi_id->logout_orb_dma); if (!scsi_id->logout_orb) goto alloc_fail; @@ -858,58 +853,11 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id) /* Login ORB DMA */ scsi_id->login_orb = - pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_login_orb), + pci_alloc_consistent(hi->host->pdev, + sizeof(struct sbp2_login_orb), &scsi_id->login_orb_dma); - if (!scsi_id->login_orb) { -alloc_fail: - if (scsi_id->query_logins_response) { - pci_free_consistent(hi->host->pdev, - sizeof(struct sbp2_query_logins_response), - scsi_id->query_logins_response, - scsi_id->query_logins_response_dma); - SBP2_DMA_FREE("query logins response DMA"); - } - - if (scsi_id->query_logins_orb) { - pci_free_consistent(hi->host->pdev, - sizeof(struct sbp2_query_logins_orb), - scsi_id->query_logins_orb, - scsi_id->query_logins_orb_dma); - SBP2_DMA_FREE("query logins ORB DMA"); - } - - if (scsi_id->logout_orb) { - pci_free_consistent(hi->host->pdev, - sizeof(struct sbp2_logout_orb), - scsi_id->logout_orb, - scsi_id->logout_orb_dma); - SBP2_DMA_FREE("logout ORB DMA"); - } - - if (scsi_id->reconnect_orb) { - pci_free_consistent(hi->host->pdev, - sizeof(struct sbp2_reconnect_orb), - scsi_id->reconnect_orb, - scsi_id->reconnect_orb_dma); - SBP2_DMA_FREE("reconnect ORB DMA"); - } - - if (scsi_id->login_response) { - pci_free_consistent(hi->host->pdev, - sizeof(struct sbp2_login_response), - scsi_id->login_response, - scsi_id->login_response_dma); - SBP2_DMA_FREE("login FIFO DMA"); - } - - list_del(&scsi_id->scsi_list); - - kfree(scsi_id); - - SBP2_ERR ("Could not allocate memory for scsi_id"); - - return -ENOMEM; - } + if (!scsi_id->login_orb) + goto alloc_fail; SBP2_DMA_ALLOC("consistent DMA region for login ORB"); SBP2_DEBUG("New SBP-2 device inserted, SCSI ID = %x", scsi_id->ud->id); @@ -935,7 +883,7 @@ alloc_fail: sbp2_remove_device(scsi_id); return -EINTR; } - + /* * Login to the sbp-2 device */ @@ -964,10 +912,17 @@ alloc_fail: error = scsi_add_device(scsi_id->scsi_host, 0, scsi_id->ud->id, 0); if (error) { SBP2_ERR("scsi_add_device failed"); + sbp2_logout_device(scsi_id); + sbp2_remove_device(scsi_id); return error; } return 0; + +alloc_fail: + SBP2_ERR("Could not allocate memory for scsi_id"); + sbp2_remove_device(scsi_id); + return -ENOMEM; } /* @@ -1054,51 +1009,44 @@ static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id) * This function deals with physical dma write requests (for adapters that do not support * physical dma in hardware). Mostly just here for debugging... */ -static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t *data, - u64 addr, size_t length, u16 flags) +static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid, + int destid, quadlet_t *data, u64 addr, + size_t length, u16 flags) { - /* - * Manually put the data in the right place. - */ - memcpy(bus_to_virt((u32)addr), data, length); - sbp2util_packet_dump(data, length, "sbp2 phys dma write by device", (u32)addr); - return(RCODE_COMPLETE); + /* + * Manually put the data in the right place. + */ + memcpy(bus_to_virt((u32) addr), data, length); + sbp2util_packet_dump(data, length, "sbp2 phys dma write by device", + (u32) addr); + return RCODE_COMPLETE; } /* * This function deals with physical dma read requests (for adapters that do not support * physical dma in hardware). Mostly just here for debugging... */ -static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_t *data, - u64 addr, size_t length, u16 flags) +static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, + quadlet_t *data, u64 addr, size_t length, + u16 flags) { - /* - * Grab data from memory and send a read response. - */ - memcpy(data, bus_to_virt((u32)addr), length); - sbp2util_packet_dump(data, length, "sbp2 phys dma read by device", (u32)addr); - return(RCODE_COMPLETE); + /* + * Grab data from memory and send a read response. + */ + memcpy(data, bus_to_virt((u32) addr), length); + sbp2util_packet_dump(data, length, "sbp2 phys dma read by device", + (u32) addr); + return RCODE_COMPLETE; } #endif - /************************************** * SBP-2 protocol related section **************************************/ /* - * This function determines if we should convert scsi commands for a particular sbp2 device type - */ -static __inline__ int sbp2_command_conversion_device_type(u8 device_type) -{ - return (((device_type == TYPE_DISK) || - (device_type == TYPE_RBC) || - (device_type == TYPE_ROM)) ? 1:0); -} - -/* * This function queries the device for the maximum concurrent logins it * supports. */ @@ -1120,11 +1068,7 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id) scsi_id->query_logins_orb->lun_misc = ORB_SET_FUNCTION(SBP2_QUERY_LOGINS_REQUEST); scsi_id->query_logins_orb->lun_misc |= ORB_SET_NOTIFY(1); - if (scsi_id->sbp2_device_type_and_lun != SBP2_DEVICE_TYPE_LUN_UNINITIALIZED) { - scsi_id->query_logins_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_device_type_and_lun); - SBP2_DEBUG("sbp2_query_logins: set lun to %d", - ORB_SET_LUN(scsi_id->sbp2_device_type_and_lun)); - } + scsi_id->query_logins_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_lun); SBP2_DEBUG("sbp2_query_logins: lun_misc initialized"); scsi_id->query_logins_orb->reserved_resp_length = @@ -1161,12 +1105,12 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id) if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, 2*HZ)) { SBP2_INFO("Error querying logins to SBP-2 device - timed out"); - return(-EIO); + return -EIO; } if (scsi_id->status_block.ORB_offset_lo != scsi_id->query_logins_orb_dma) { SBP2_INFO("Error querying logins to SBP-2 device - timed out"); - return(-EIO); + return -EIO; } if (STATUS_GET_RESP(scsi_id->status_block.ORB_offset_hi_misc) || @@ -1174,7 +1118,7 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id) STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) { SBP2_INFO("Error querying logins to SBP-2 device - timed out"); - return(-EIO); + return -EIO; } sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_response, sizeof(struct sbp2_query_logins_response)); @@ -1191,7 +1135,7 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id) SBP2_DEBUG("Number of active logins: %d", active_logins); if (active_logins >= max_logins) { - return(-EIO); + return -EIO; } return 0; @@ -1210,13 +1154,13 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id) if (!scsi_id->login_orb) { SBP2_DEBUG("sbp2_login_device: login_orb not alloc'd!"); - return(-EIO); + return -EIO; } if (!exclusive_login) { if (sbp2_query_logins(scsi_id)) { SBP2_INFO("Device does not support any more concurrent logins"); - return(-EIO); + return -EIO; } } @@ -1233,12 +1177,7 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id) scsi_id->login_orb->lun_misc |= ORB_SET_RECONNECT(0); /* One second reconnect time */ scsi_id->login_orb->lun_misc |= ORB_SET_EXCLUSIVE(exclusive_login); /* Exclusive access to device */ scsi_id->login_orb->lun_misc |= ORB_SET_NOTIFY(1); /* Notify us of login complete */ - /* Set the lun if we were able to pull it from the device's unit directory */ - if (scsi_id->sbp2_device_type_and_lun != SBP2_DEVICE_TYPE_LUN_UNINITIALIZED) { - scsi_id->login_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_device_type_and_lun); - SBP2_DEBUG("sbp2_query_logins: set lun to %d", - ORB_SET_LUN(scsi_id->sbp2_device_type_and_lun)); - } + scsi_id->login_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_lun); SBP2_DEBUG("sbp2_login_device: lun_misc initialized"); scsi_id->login_orb->passwd_resp_lengths = @@ -1288,7 +1227,7 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id) */ if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, 20*HZ)) { SBP2_ERR("Error logging into SBP-2 device - login timed-out"); - return(-EIO); + return -EIO; } /* @@ -1296,7 +1235,7 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id) */ if (scsi_id->status_block.ORB_offset_lo != scsi_id->login_orb_dma) { SBP2_ERR("Error logging into SBP-2 device - login timed-out"); - return(-EIO); + return -EIO; } /* @@ -1307,7 +1246,7 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id) STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) { SBP2_ERR("Error logging into SBP-2 device - login failed"); - return(-EIO); + return -EIO; } /* @@ -1331,7 +1270,7 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id) SBP2_INFO("Logged into SBP-2 device"); - return(0); + return 0; } @@ -1385,8 +1324,7 @@ static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id) atomic_set(&scsi_id->sbp2_login_complete, 0); error = hpsb_node_write(scsi_id->ne, - scsi_id->sbp2_management_agent_addr, - data, 8); + scsi_id->sbp2_management_agent_addr, data, 8); if (error) return error; @@ -1396,7 +1334,7 @@ static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id) SBP2_INFO("Logged out of SBP-2 device"); - return(0); + return 0; } @@ -1456,8 +1394,7 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id) atomic_set(&scsi_id->sbp2_login_complete, 0); error = hpsb_node_write(scsi_id->ne, - scsi_id->sbp2_management_agent_addr, - data, 8); + scsi_id->sbp2_management_agent_addr, data, 8); if (error) return error; @@ -1466,7 +1403,7 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id) */ if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, HZ)) { SBP2_ERR("Error reconnecting to SBP-2 device - reconnect timed-out"); - return(-EIO); + return -EIO; } /* @@ -1474,7 +1411,7 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id) */ if (scsi_id->status_block.ORB_offset_lo != scsi_id->reconnect_orb_dma) { SBP2_ERR("Error reconnecting to SBP-2 device - reconnect timed-out"); - return(-EIO); + return -EIO; } /* @@ -1485,12 +1422,12 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id) STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) { SBP2_ERR("Error reconnecting to SBP-2 device - reconnect failed"); - return(-EIO); + return -EIO; } HPSB_DEBUG("Reconnected to SBP-2 device"); - return(0); + return 0; } @@ -1513,10 +1450,9 @@ static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id) SBP2_ERR("sbp2_set_busy_timeout error"); } - return(0); + return 0; } - /* * This function is called to parse sbp2 device's config rom unit * directory. Used to determine things like sbp2 management agent offset, @@ -1529,7 +1465,7 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, struct csr1212_dentry *dentry; u64 management_agent_addr; u32 command_set_spec_id, command_set, unit_characteristics, - firmware_revision, workarounds; + firmware_revision, workarounds; int i; SBP2_DEBUG("sbp2_parse_unit_directory"); @@ -1547,13 +1483,14 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, if (kv->key.type == CSR1212_KV_TYPE_CSR_OFFSET) { /* Save off the management agent address */ management_agent_addr = - CSR1212_REGISTER_SPACE_BASE + - (kv->value.csr_offset << 2); + CSR1212_REGISTER_SPACE_BASE + + (kv->value.csr_offset << 2); SBP2_DEBUG("sbp2_management_agent_addr = %x", - (unsigned int) management_agent_addr); + (unsigned int)management_agent_addr); } else if (kv->key.type == CSR1212_KV_TYPE_IMMEDIATE) { - scsi_id->sbp2_device_type_and_lun = kv->value.immediate; + scsi_id->sbp2_lun = + ORB_SET_LUN(kv->value.immediate); } break; @@ -1561,14 +1498,14 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, /* Command spec organization */ command_set_spec_id = kv->value.immediate; SBP2_DEBUG("sbp2_command_set_spec_id = %x", - (unsigned int) command_set_spec_id); + (unsigned int)command_set_spec_id); break; case SBP2_COMMAND_SET_KEY: /* Command set used by sbp2 device */ command_set = kv->value.immediate; SBP2_DEBUG("sbp2_command_set = %x", - (unsigned int) command_set); + (unsigned int)command_set); break; case SBP2_UNIT_CHARACTERISTICS_KEY: @@ -1578,7 +1515,7 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, */ unit_characteristics = kv->value.immediate; SBP2_DEBUG("sbp2_unit_characteristics = %x", - (unsigned int) unit_characteristics); + (unsigned int)unit_characteristics); break; case SBP2_FIRMWARE_REVISION_KEY: @@ -1586,9 +1523,10 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, firmware_revision = kv->value.immediate; if (force_inquiry_hack) SBP2_INFO("sbp2_firmware_revision = %x", - (unsigned int) firmware_revision); - else SBP2_DEBUG("sbp2_firmware_revision = %x", - (unsigned int) firmware_revision); + (unsigned int)firmware_revision); + else + SBP2_DEBUG("sbp2_firmware_revision = %x", + (unsigned int)firmware_revision); break; default: @@ -1646,7 +1584,7 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, scsi_id->sbp2_firmware_revision = firmware_revision; scsi_id->workarounds = workarounds; if (ud->flags & UNIT_DIRECTORY_HAS_LUN) - scsi_id->sbp2_device_type_and_lun = ud->lun; + scsi_id->sbp2_lun = ORB_SET_LUN(ud->lun); } } @@ -1666,8 +1604,9 @@ static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id) SBP2_DEBUG("sbp2_max_speed_and_size"); /* Initial setting comes from the hosts speed map */ - scsi_id->speed_code = hi->host->speed_map[NODEID_TO_NODE(hi->host->node_id) * 64 - + NODEID_TO_NODE(scsi_id->ne->nodeid)]; + scsi_id->speed_code = + hi->host->speed_map[NODEID_TO_NODE(hi->host->node_id) * 64 + + NODEID_TO_NODE(scsi_id->ne->nodeid)]; /* Bump down our speed if the user requested it */ if (scsi_id->speed_code > max_speed) { @@ -1678,15 +1617,16 @@ static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id) /* Payload size is the lesser of what our speed supports and what * our host supports. */ - scsi_id->max_payload_size = min(sbp2_speedto_max_payload[scsi_id->speed_code], - (u8)(hi->host->csr.max_rec - 1)); + scsi_id->max_payload_size = + min(sbp2_speedto_max_payload[scsi_id->speed_code], + (u8) (hi->host->csr.max_rec - 1)); HPSB_DEBUG("Node " NODE_BUS_FMT ": Max speed [%s] - Max payload [%u]", NODE_BUS_ARGS(hi->host, scsi_id->ne->nodeid), hpsb_speedto_str[scsi_id->speed_code], - 1 << ((u32)scsi_id->max_payload_size + 2)); + 1 << ((u32) scsi_id->max_payload_size + 2)); - return(0); + return 0; } /* @@ -1721,30 +1661,187 @@ static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait) */ scsi_id->last_orb = NULL; - return(0); + return 0; +} + +static void sbp2_prep_command_orb_sg(struct sbp2_command_orb *orb, + struct sbp2scsi_host_info *hi, + struct sbp2_command_info *command, + unsigned int scsi_use_sg, + struct scatterlist *sgpnt, + u32 orb_direction, + enum dma_data_direction dma_dir) +{ + command->dma_dir = dma_dir; + orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id); + orb->misc |= ORB_SET_DIRECTION(orb_direction); + + /* Special case if only one element (and less than 64KB in size) */ + if ((scsi_use_sg == 1) && + (sgpnt[0].length <= SBP2_MAX_SG_ELEMENT_LENGTH)) { + + SBP2_DEBUG("Only one s/g element"); + command->dma_size = sgpnt[0].length; + command->dma_type = CMD_DMA_PAGE; + command->cmd_dma = pci_map_page(hi->host->pdev, + sgpnt[0].page, + sgpnt[0].offset, + command->dma_size, + command->dma_dir); + SBP2_DMA_ALLOC("single page scatter element"); + + orb->data_descriptor_lo = command->cmd_dma; + orb->misc |= ORB_SET_DATA_SIZE(command->dma_size); + + } else { + struct sbp2_unrestricted_page_table *sg_element = + &command->scatter_gather_element[0]; + u32 sg_count, sg_len; + dma_addr_t sg_addr; + int i, count = pci_map_sg(hi->host->pdev, sgpnt, scsi_use_sg, + dma_dir); + + SBP2_DMA_ALLOC("scatter list"); + + command->dma_size = scsi_use_sg; + command->sge_buffer = sgpnt; + + /* use page tables (s/g) */ + orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1); + orb->data_descriptor_lo = command->sge_dma; + + /* + * Loop through and fill out our sbp-2 page tables + * (and split up anything too large) + */ + for (i = 0, sg_count = 0 ; i < count; i++, sgpnt++) { + sg_len = sg_dma_len(sgpnt); + sg_addr = sg_dma_address(sgpnt); + while (sg_len) { + sg_element[sg_count].segment_base_lo = sg_addr; + if (sg_len > SBP2_MAX_SG_ELEMENT_LENGTH) { + sg_element[sg_count].length_segment_base_hi = + PAGE_TABLE_SET_SEGMENT_LENGTH(SBP2_MAX_SG_ELEMENT_LENGTH); + sg_addr += SBP2_MAX_SG_ELEMENT_LENGTH; + sg_len -= SBP2_MAX_SG_ELEMENT_LENGTH; + } else { + sg_element[sg_count].length_segment_base_hi = + PAGE_TABLE_SET_SEGMENT_LENGTH(sg_len); + sg_len = 0; + } + sg_count++; + } + } + + /* Number of page table (s/g) elements */ + orb->misc |= ORB_SET_DATA_SIZE(sg_count); + + sbp2util_packet_dump(sg_element, + (sizeof(struct sbp2_unrestricted_page_table)) * sg_count, + "sbp2 s/g list", command->sge_dma); + + /* Byte swap page tables if necessary */ + sbp2util_cpu_to_be32_buffer(sg_element, + (sizeof(struct sbp2_unrestricted_page_table)) * + sg_count); + } +} + +static void sbp2_prep_command_orb_no_sg(struct sbp2_command_orb *orb, + struct sbp2scsi_host_info *hi, + struct sbp2_command_info *command, + struct scatterlist *sgpnt, + u32 orb_direction, + unsigned int scsi_request_bufflen, + void *scsi_request_buffer, + enum dma_data_direction dma_dir) +{ + command->dma_dir = dma_dir; + command->dma_size = scsi_request_bufflen; + command->dma_type = CMD_DMA_SINGLE; + command->cmd_dma = pci_map_single(hi->host->pdev, scsi_request_buffer, + command->dma_size, command->dma_dir); + orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id); + orb->misc |= ORB_SET_DIRECTION(orb_direction); + + SBP2_DMA_ALLOC("single bulk"); + + /* + * Handle case where we get a command w/o s/g enabled (but + * check for transfers larger than 64K) + */ + if (scsi_request_bufflen <= SBP2_MAX_SG_ELEMENT_LENGTH) { + + orb->data_descriptor_lo = command->cmd_dma; + orb->misc |= ORB_SET_DATA_SIZE(scsi_request_bufflen); + + } else { + struct sbp2_unrestricted_page_table *sg_element = + &command->scatter_gather_element[0]; + u32 sg_count, sg_len; + dma_addr_t sg_addr; + + /* + * Need to turn this into page tables, since the + * buffer is too large. + */ + orb->data_descriptor_lo = command->sge_dma; + + /* Use page tables (s/g) */ + orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1); + + /* + * fill out our sbp-2 page tables (and split up + * the large buffer) + */ + sg_count = 0; + sg_len = scsi_request_bufflen; + sg_addr = command->cmd_dma; + while (sg_len) { + sg_element[sg_count].segment_base_lo = sg_addr; + if (sg_len > SBP2_MAX_SG_ELEMENT_LENGTH) { + sg_element[sg_count].length_segment_base_hi = + PAGE_TABLE_SET_SEGMENT_LENGTH(SBP2_MAX_SG_ELEMENT_LENGTH); + sg_addr += SBP2_MAX_SG_ELEMENT_LENGTH; + sg_len -= SBP2_MAX_SG_ELEMENT_LENGTH; + } else { + sg_element[sg_count].length_segment_base_hi = + PAGE_TABLE_SET_SEGMENT_LENGTH(sg_len); + sg_len = 0; + } + sg_count++; + } + + /* Number of page table (s/g) elements */ + orb->misc |= ORB_SET_DATA_SIZE(sg_count); + + sbp2util_packet_dump(sg_element, + (sizeof(struct sbp2_unrestricted_page_table)) * sg_count, + "sbp2 s/g list", command->sge_dma); + + /* Byte swap page tables if necessary */ + sbp2util_cpu_to_be32_buffer(sg_element, + (sizeof(struct sbp2_unrestricted_page_table)) * + sg_count); + } } /* * This function is called to create the actual command orb and s/g list * out of the scsi command itself. */ -static int sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id, - struct sbp2_command_info *command, - unchar *scsi_cmd, - unsigned int scsi_use_sg, - unsigned int scsi_request_bufflen, - void *scsi_request_buffer, - enum dma_data_direction dma_dir) - +static void sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id, + struct sbp2_command_info *command, + unchar *scsi_cmd, + unsigned int scsi_use_sg, + unsigned int scsi_request_bufflen, + void *scsi_request_buffer, + enum dma_data_direction dma_dir) { struct sbp2scsi_host_info *hi = scsi_id->hi; - struct scatterlist *sgpnt = (struct scatterlist *) scsi_request_buffer; + struct scatterlist *sgpnt = (struct scatterlist *)scsi_request_buffer; struct sbp2_command_orb *command_orb = &command->command_orb; - struct sbp2_unrestricted_page_table *scatter_gather_element = - &command->scatter_gather_element[0]; - u32 sg_count, sg_len, orb_direction; - dma_addr_t sg_addr; - int i; + u32 orb_direction; /* * Set-up our command ORB.. @@ -1758,222 +1855,42 @@ static int sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id, command_orb->next_ORB_lo = 0x0; command_orb->misc = ORB_SET_MAX_PAYLOAD(scsi_id->max_payload_size); command_orb->misc |= ORB_SET_SPEED(scsi_id->speed_code); - command_orb->misc |= ORB_SET_NOTIFY(1); /* Notify us when complete */ + command_orb->misc |= ORB_SET_NOTIFY(1); /* Notify us when complete */ - /* - * Get the direction of the transfer. If the direction is unknown, then use our - * goofy table as a back-up. - */ - switch (dma_dir) { - case DMA_NONE: - orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER; - break; - case DMA_TO_DEVICE: - orb_direction = ORB_DIRECTION_WRITE_TO_MEDIA; - break; - case DMA_FROM_DEVICE: - orb_direction = ORB_DIRECTION_READ_FROM_MEDIA; - break; - case DMA_BIDIRECTIONAL: - default: - SBP2_ERR("SCSI data transfer direction not specified. " - "Update the SBP2 direction table in sbp2.h if " - "necessary for your application"); - __scsi_print_command(scsi_cmd); - orb_direction = sbp2scsi_direction_table[*scsi_cmd]; - break; + if (dma_dir == DMA_NONE) + orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER; + else if (dma_dir == DMA_TO_DEVICE && scsi_request_bufflen) + orb_direction = ORB_DIRECTION_WRITE_TO_MEDIA; + else if (dma_dir == DMA_FROM_DEVICE && scsi_request_bufflen) + orb_direction = ORB_DIRECTION_READ_FROM_MEDIA; + else { + SBP2_WARN("Falling back to DMA_NONE"); + orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER; } - /* - * Set-up our pagetable stuff... unfortunately, this has become - * messier than I'd like. Need to clean this up a bit. ;-) - */ + /* Set-up our pagetable stuff */ if (orb_direction == ORB_DIRECTION_NO_DATA_TRANSFER) { - SBP2_DEBUG("No data transfer"); - - /* - * Handle no data transfer - */ command_orb->data_descriptor_hi = 0x0; command_orb->data_descriptor_lo = 0x0; command_orb->misc |= ORB_SET_DIRECTION(1); - } else if (scsi_use_sg) { - SBP2_DEBUG("Use scatter/gather"); - - /* - * Special case if only one element (and less than 64KB in size) - */ - if ((scsi_use_sg == 1) && (sgpnt[0].length <= SBP2_MAX_SG_ELEMENT_LENGTH)) { - - SBP2_DEBUG("Only one s/g element"); - command->dma_dir = dma_dir; - command->dma_size = sgpnt[0].length; - command->dma_type = CMD_DMA_PAGE; - command->cmd_dma = pci_map_page(hi->host->pdev, - sgpnt[0].page, - sgpnt[0].offset, - command->dma_size, - command->dma_dir); - SBP2_DMA_ALLOC("single page scatter element"); - - command_orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id); - command_orb->data_descriptor_lo = command->cmd_dma; - command_orb->misc |= ORB_SET_DATA_SIZE(command->dma_size); - command_orb->misc |= ORB_SET_DIRECTION(orb_direction); - - } else { - int count = pci_map_sg(hi->host->pdev, sgpnt, scsi_use_sg, dma_dir); - SBP2_DMA_ALLOC("scatter list"); - - command->dma_size = scsi_use_sg; - command->dma_dir = dma_dir; - command->sge_buffer = sgpnt; - - /* use page tables (s/g) */ - command_orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1); - command_orb->misc |= ORB_SET_DIRECTION(orb_direction); - command_orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id); - command_orb->data_descriptor_lo = command->sge_dma; - - /* - * Loop through and fill out our sbp-2 page tables - * (and split up anything too large) - */ - for (i = 0, sg_count = 0 ; i < count; i++, sgpnt++) { - sg_len = sg_dma_len(sgpnt); - sg_addr = sg_dma_address(sgpnt); - while (sg_len) { - scatter_gather_element[sg_count].segment_base_lo = sg_addr; - if (sg_len > SBP2_MAX_SG_ELEMENT_LENGTH) { - scatter_gather_element[sg_count].length_segment_base_hi = - PAGE_TABLE_SET_SEGMENT_LENGTH(SBP2_MAX_SG_ELEMENT_LENGTH); - sg_addr += SBP2_MAX_SG_ELEMENT_LENGTH; - sg_len -= SBP2_MAX_SG_ELEMENT_LENGTH; - } else { - scatter_gather_element[sg_count].length_segment_base_hi = - PAGE_TABLE_SET_SEGMENT_LENGTH(sg_len); - sg_len = 0; - } - sg_count++; - } - } - - /* Number of page table (s/g) elements */ - command_orb->misc |= ORB_SET_DATA_SIZE(sg_count); - - sbp2util_packet_dump(scatter_gather_element, - (sizeof(struct sbp2_unrestricted_page_table)) * sg_count, - "sbp2 s/g list", command->sge_dma); - - /* - * Byte swap page tables if necessary - */ - sbp2util_cpu_to_be32_buffer(scatter_gather_element, - (sizeof(struct sbp2_unrestricted_page_table)) * - sg_count); - - } - + sbp2_prep_command_orb_sg(command_orb, hi, command, scsi_use_sg, + sgpnt, orb_direction, dma_dir); } else { - SBP2_DEBUG("No scatter/gather"); - - command->dma_dir = dma_dir; - command->dma_size = scsi_request_bufflen; - command->dma_type = CMD_DMA_SINGLE; - command->cmd_dma = pci_map_single (hi->host->pdev, scsi_request_buffer, - command->dma_size, - command->dma_dir); - SBP2_DMA_ALLOC("single bulk"); - - /* - * Handle case where we get a command w/o s/g enabled (but - * check for transfers larger than 64K) - */ - if (scsi_request_bufflen <= SBP2_MAX_SG_ELEMENT_LENGTH) { - - command_orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id); - command_orb->data_descriptor_lo = command->cmd_dma; - command_orb->misc |= ORB_SET_DATA_SIZE(scsi_request_bufflen); - command_orb->misc |= ORB_SET_DIRECTION(orb_direction); - - /* - * Sanity, in case our direction table is not - * up-to-date - */ - if (!scsi_request_bufflen) { - command_orb->data_descriptor_hi = 0x0; - command_orb->data_descriptor_lo = 0x0; - command_orb->misc |= ORB_SET_DIRECTION(1); - } - - } else { - /* - * Need to turn this into page tables, since the - * buffer is too large. - */ - command_orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id); - command_orb->data_descriptor_lo = command->sge_dma; - - /* Use page tables (s/g) */ - command_orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1); - command_orb->misc |= ORB_SET_DIRECTION(orb_direction); - - /* - * fill out our sbp-2 page tables (and split up - * the large buffer) - */ - sg_count = 0; - sg_len = scsi_request_bufflen; - sg_addr = command->cmd_dma; - while (sg_len) { - scatter_gather_element[sg_count].segment_base_lo = sg_addr; - if (sg_len > SBP2_MAX_SG_ELEMENT_LENGTH) { - scatter_gather_element[sg_count].length_segment_base_hi = - PAGE_TABLE_SET_SEGMENT_LENGTH(SBP2_MAX_SG_ELEMENT_LENGTH); - sg_addr += SBP2_MAX_SG_ELEMENT_LENGTH; - sg_len -= SBP2_MAX_SG_ELEMENT_LENGTH; - } else { - scatter_gather_element[sg_count].length_segment_base_hi = - PAGE_TABLE_SET_SEGMENT_LENGTH(sg_len); - sg_len = 0; - } - sg_count++; - } - - /* Number of page table (s/g) elements */ - command_orb->misc |= ORB_SET_DATA_SIZE(sg_count); - - sbp2util_packet_dump(scatter_gather_element, - (sizeof(struct sbp2_unrestricted_page_table)) * sg_count, - "sbp2 s/g list", command->sge_dma); - - /* - * Byte swap page tables if necessary - */ - sbp2util_cpu_to_be32_buffer(scatter_gather_element, - (sizeof(struct sbp2_unrestricted_page_table)) * - sg_count); - - } - + sbp2_prep_command_orb_no_sg(command_orb, hi, command, sgpnt, + orb_direction, scsi_request_bufflen, + scsi_request_buffer, dma_dir); } - /* - * Byte swap command ORB if necessary - */ + /* Byte swap command ORB if necessary */ sbp2util_cpu_to_be32_buffer(command_orb, sizeof(struct sbp2_command_orb)); - /* - * Put our scsi command in the command ORB - */ + /* Put our scsi command in the command ORB */ memset(command_orb->cdb, 0, 12); memcpy(command_orb->cdb, scsi_cmd, COMMAND_SIZE(*scsi_cmd)); - - return(0); } /* @@ -1989,7 +1906,7 @@ static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id, outstanding_orb_incr; SBP2_ORB_DEBUG("sending command orb %p, total orbs = %x", - command_orb, global_outstanding_command_orbs); + command_orb, global_outstanding_command_orbs); pci_dma_sync_single_for_device(hi->host->pdev, command->command_orb_dma, sizeof(struct sbp2_command_orb), @@ -2034,10 +1951,11 @@ static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id, * both by the sbp2 device and us. */ scsi_id->last_orb->next_ORB_lo = - cpu_to_be32(command->command_orb_dma); + cpu_to_be32(command->command_orb_dma); /* Tells hardware that this pointer is valid */ scsi_id->last_orb->next_ORB_hi = 0x0; - pci_dma_sync_single_for_device(hi->host->pdev, scsi_id->last_orb_dma, + pci_dma_sync_single_for_device(hi->host->pdev, + scsi_id->last_orb_dma, sizeof(struct sbp2_command_orb), PCI_DMA_BIDIRECTIONAL); @@ -2051,14 +1969,14 @@ static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id, if (sbp2util_node_write_no_wait(ne, addr, &data, 4) < 0) { SBP2_ERR("sbp2util_node_write_no_wait failed"); - return(-EIO); + return -EIO; } scsi_id->last_orb = command_orb; scsi_id->last_orb_dma = command->command_orb_dma; } - return(0); + return 0; } /* @@ -2085,7 +2003,7 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id, */ command = sbp2util_allocate_command_orb(scsi_id, SCpnt, done); if (!command) { - return(-EIO); + return -EIO; } /* @@ -2106,11 +2024,6 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id, sbp2_create_command_orb(scsi_id, command, cmd, SCpnt->use_sg, request_bufflen, SCpnt->request_buffer, SCpnt->sc_data_direction); - /* - * Update our cdb if necessary (to handle sbp2 RBC command set - * differences). This is where the command set hacks go! =) - */ - sbp2_check_sbp2_command(scsi_id, command->command_orb.cdb); sbp2util_packet_dump(&command->command_orb, sizeof(struct sbp2_command_orb), "sbp2 command orb", command->command_orb_dma); @@ -2125,112 +2038,7 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id, */ sbp2_link_orb_command(scsi_id, command); - return(0); -} - - -/* - * This function deals with command set differences between Linux scsi - * command set and sbp2 RBC command set. - */ -static void sbp2_check_sbp2_command(struct scsi_id_instance_data *scsi_id, unchar *cmd) -{ - unchar new_cmd[16]; - u8 device_type = SBP2_DEVICE_TYPE (scsi_id->sbp2_device_type_and_lun); - - SBP2_DEBUG("sbp2_check_sbp2_command"); - - switch (*cmd) { - - case READ_6: - - if (sbp2_command_conversion_device_type(device_type)) { - - SBP2_DEBUG("Convert READ_6 to READ_10"); - - /* - * Need to turn read_6 into read_10 - */ - new_cmd[0] = 0x28; - new_cmd[1] = (cmd[1] & 0xe0); - new_cmd[2] = 0x0; - new_cmd[3] = (cmd[1] & 0x1f); - new_cmd[4] = cmd[2]; - new_cmd[5] = cmd[3]; - new_cmd[6] = 0x0; - new_cmd[7] = 0x0; - new_cmd[8] = cmd[4]; - new_cmd[9] = cmd[5]; - - memcpy(cmd, new_cmd, 10); - - } - - break; - - case WRITE_6: - - if (sbp2_command_conversion_device_type(device_type)) { - - SBP2_DEBUG("Convert WRITE_6 to WRITE_10"); - - /* - * Need to turn write_6 into write_10 - */ - new_cmd[0] = 0x2a; - new_cmd[1] = (cmd[1] & 0xe0); - new_cmd[2] = 0x0; - new_cmd[3] = (cmd[1] & 0x1f); - new_cmd[4] = cmd[2]; - new_cmd[5] = cmd[3]; - new_cmd[6] = 0x0; - new_cmd[7] = 0x0; - new_cmd[8] = cmd[4]; - new_cmd[9] = cmd[5]; - - memcpy(cmd, new_cmd, 10); - - } - - break; - - case MODE_SENSE: - - if (sbp2_command_conversion_device_type(device_type)) { - - SBP2_DEBUG("Convert MODE_SENSE_6 to MODE_SENSE_10"); - - /* - * Need to turn mode_sense_6 into mode_sense_10 - */ - new_cmd[0] = 0x5a; - new_cmd[1] = cmd[1]; - new_cmd[2] = cmd[2]; - new_cmd[3] = 0x0; - new_cmd[4] = 0x0; - new_cmd[5] = 0x0; - new_cmd[6] = 0x0; - new_cmd[7] = 0x0; - new_cmd[8] = cmd[4]; - new_cmd[9] = cmd[5]; - - memcpy(cmd, new_cmd, 10); - - } - - break; - - case MODE_SELECT: - - /* - * TODO. Probably need to change mode select to 10 byte version - */ - - default: - break; - } - - return; + return 0; } /* @@ -2260,80 +2068,40 @@ static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense sense_data[14] = sbp2_status[20]; sense_data[15] = sbp2_status[21]; - return(sbp2_status[8] & 0x3f); /* return scsi status */ + return sbp2_status[8] & 0x3f; /* return scsi status */ } /* * This function is called after a command is completed, in order to do any necessary SBP-2 * response data translations for the SCSI stack */ -static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id, +static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id, struct scsi_cmnd *SCpnt) { u8 *scsi_buf = SCpnt->request_buffer; - u8 device_type = SBP2_DEVICE_TYPE (scsi_id->sbp2_device_type_and_lun); SBP2_DEBUG("sbp2_check_sbp2_response"); switch (SCpnt->cmnd[0]) { - case INQUIRY: - - /* - * If scsi_id->sbp2_device_type_and_lun is uninitialized, then fill - * this information in from the inquiry response data. Lun is set to zero. - */ - if (scsi_id->sbp2_device_type_and_lun == SBP2_DEVICE_TYPE_LUN_UNINITIALIZED) { - SBP2_DEBUG("Creating sbp2_device_type_and_lun from scsi inquiry data"); - scsi_id->sbp2_device_type_and_lun = (scsi_buf[0] & 0x1f) << 16; - } - - /* - * Make sure data length is ok. Minimum length is 36 bytes - */ - if (scsi_buf[4] == 0) { - scsi_buf[4] = 36 - 5; - } - - /* - * Check for Simple Direct Access Device and change it to TYPE_DISK - */ - if ((scsi_buf[0] & 0x1f) == TYPE_RBC) { - SBP2_DEBUG("Changing TYPE_RBC to TYPE_DISK"); - scsi_buf[0] &= 0xe0; - } - - /* - * Fix ansi revision and response data format - */ - scsi_buf[2] |= 2; - scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2; - - break; - - case MODE_SENSE: - - if (sbp2_command_conversion_device_type(device_type)) { - - SBP2_DEBUG("Modify mode sense response (10 byte version)"); - - scsi_buf[0] = scsi_buf[1]; /* Mode data length */ - scsi_buf[1] = scsi_buf[2]; /* Medium type */ - scsi_buf[2] = scsi_buf[3]; /* Device specific parameter */ - scsi_buf[3] = scsi_buf[7]; /* Block descriptor length */ - memcpy(scsi_buf + 4, scsi_buf + 8, scsi_buf[0]); - } - - break; + case INQUIRY: + /* + * Make sure data length is ok. Minimum length is 36 bytes + */ + if (scsi_buf[4] == 0) { + scsi_buf[4] = 36 - 5; + } - case MODE_SELECT: + /* + * Fix ansi revision and response data format + */ + scsi_buf[2] |= 2; + scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2; - /* - * TODO. Probably need to change mode select to 10 byte version - */ + break; - default: - break; + default: + break; } return; } @@ -2358,14 +2126,14 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest if (!host) { SBP2_ERR("host is NULL - this is bad!"); - return(RCODE_ADDRESS_ERROR); + return RCODE_ADDRESS_ERROR; } hi = hpsb_get_hostinfo(&sbp2_highlevel, host); if (!hi) { SBP2_ERR("host info is NULL - this is bad!"); - return(RCODE_ADDRESS_ERROR); + return RCODE_ADDRESS_ERROR; } /* @@ -2382,7 +2150,7 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest if (!scsi_id) { SBP2_ERR("scsi_id is NULL - device is gone?"); - return(RCODE_ADDRESS_ERROR); + return RCODE_ADDRESS_ERROR; } /* @@ -2480,10 +2248,9 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest SBP2_ORB_DEBUG("command orb completed"); } - return(RCODE_COMPLETE); + return RCODE_COMPLETE; } - /************************************** * SCSI interface related section **************************************/ @@ -2541,6 +2308,16 @@ static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt, } /* + * Bidirectional commands are not yet implemented, + * and unknown transfer direction not handled. + */ + if (SCpnt->sc_data_direction == DMA_BIDIRECTIONAL) { + SBP2_ERR("Cannot handle DMA_BIDIRECTIONAL - rejecting command"); + result = DID_ERROR << 16; + goto done; + } + + /* * Try and send our SCSI command */ if (sbp2_send_command(scsi_id, SCpnt, done)) { @@ -2616,55 +2393,56 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id, * complete the command, just let it get retried at the end of the * bus reset. */ - if (!hpsb_node_entry_valid(scsi_id->ne) && (scsi_status != SBP2_SCSI_STATUS_GOOD)) { + if (!hpsb_node_entry_valid(scsi_id->ne) + && (scsi_status != SBP2_SCSI_STATUS_GOOD)) { SBP2_ERR("Bus reset in progress - retry command later"); return; } - + /* * Switch on scsi status */ switch (scsi_status) { - case SBP2_SCSI_STATUS_GOOD: - SCpnt->result = DID_OK; - break; + case SBP2_SCSI_STATUS_GOOD: + SCpnt->result = DID_OK; + break; - case SBP2_SCSI_STATUS_BUSY: - SBP2_ERR("SBP2_SCSI_STATUS_BUSY"); - SCpnt->result = DID_BUS_BUSY << 16; - break; + case SBP2_SCSI_STATUS_BUSY: + SBP2_ERR("SBP2_SCSI_STATUS_BUSY"); + SCpnt->result = DID_BUS_BUSY << 16; + break; - case SBP2_SCSI_STATUS_CHECK_CONDITION: - SBP2_DEBUG("SBP2_SCSI_STATUS_CHECK_CONDITION"); - SCpnt->result = CHECK_CONDITION << 1; + case SBP2_SCSI_STATUS_CHECK_CONDITION: + SBP2_DEBUG("SBP2_SCSI_STATUS_CHECK_CONDITION"); + SCpnt->result = CHECK_CONDITION << 1; - /* - * Debug stuff - */ + /* + * Debug stuff + */ #if CONFIG_IEEE1394_SBP2_DEBUG >= 1 - scsi_print_command(SCpnt); - scsi_print_sense("bh", SCpnt); + scsi_print_command(SCpnt); + scsi_print_sense("bh", SCpnt); #endif - break; + break; - case SBP2_SCSI_STATUS_SELECTION_TIMEOUT: - SBP2_ERR("SBP2_SCSI_STATUS_SELECTION_TIMEOUT"); - SCpnt->result = DID_NO_CONNECT << 16; - scsi_print_command(SCpnt); - break; + case SBP2_SCSI_STATUS_SELECTION_TIMEOUT: + SBP2_ERR("SBP2_SCSI_STATUS_SELECTION_TIMEOUT"); + SCpnt->result = DID_NO_CONNECT << 16; + scsi_print_command(SCpnt); + break; - case SBP2_SCSI_STATUS_CONDITION_MET: - case SBP2_SCSI_STATUS_RESERVATION_CONFLICT: - case SBP2_SCSI_STATUS_COMMAND_TERMINATED: - SBP2_ERR("Bad SCSI status = %x", scsi_status); - SCpnt->result = DID_ERROR << 16; - scsi_print_command(SCpnt); - break; + case SBP2_SCSI_STATUS_CONDITION_MET: + case SBP2_SCSI_STATUS_RESERVATION_CONFLICT: + case SBP2_SCSI_STATUS_COMMAND_TERMINATED: + SBP2_ERR("Bad SCSI status = %x", scsi_status); + SCpnt->result = DID_ERROR << 16; + scsi_print_command(SCpnt); + break; - default: - SBP2_ERR("Unsupported SCSI status = %x", scsi_status); - SCpnt->result = DID_ERROR << 16; + default: + SBP2_ERR("Unsupported SCSI status = %x", scsi_status); + SCpnt->result = DID_ERROR << 16; } /* @@ -2678,7 +2456,8 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id, * If a bus reset is in progress and there was an error, complete * the command as busy so that it will get retried. */ - if (!hpsb_node_entry_valid(scsi_id->ne) && (scsi_status != SBP2_SCSI_STATUS_GOOD)) { + if (!hpsb_node_entry_valid(scsi_id->ne) + && (scsi_status != SBP2_SCSI_STATUS_GOOD)) { SBP2_ERR("Completing command with busy (bus reset)"); SCpnt->result = DID_BUS_BUSY << 16; } @@ -2699,31 +2478,29 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id, /* * Tell scsi stack that we're done with this command */ - done (SCpnt); + done(SCpnt); } - static int sbp2scsi_slave_alloc(struct scsi_device *sdev) { ((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = sdev; return 0; } - static int sbp2scsi_slave_configure(struct scsi_device *sdev) { blk_queue_dma_alignment(sdev->request_queue, (512 - 1)); + sdev->use_10_for_rw = 1; + sdev->use_10_for_ms = 1; return 0; } - static void sbp2scsi_slave_destroy(struct scsi_device *sdev) { ((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = NULL; return; } - /* * Called by scsi stack when something has really gone wrong. Usually * called when a command has timed-out for some reason. @@ -2769,7 +2546,7 @@ static int sbp2scsi_abort(struct scsi_cmnd *SCpnt) sbp2scsi_complete_all_commands(scsi_id, DID_BUS_BUSY); } - return(SUCCESS); + return SUCCESS; } /* @@ -2779,28 +2556,20 @@ static int sbp2scsi_reset(struct scsi_cmnd *SCpnt) { struct scsi_id_instance_data *scsi_id = (struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0]; - unsigned long flags; SBP2_ERR("reset requested"); - spin_lock_irqsave(SCpnt->device->host->host_lock, flags); - if (sbp2util_node_is_available(scsi_id)) { SBP2_ERR("Generating sbp2 fetch agent reset"); sbp2_agent_reset(scsi_id, 0); } - spin_unlock_irqrestore(SCpnt->device->host->host_lock, flags); - return SUCCESS; } -static const char *sbp2scsi_info (struct Scsi_Host *host) -{ - return "SCSI emulation for IEEE-1394 SBP-2 Devices"; -} - -static ssize_t sbp2_sysfs_ieee1394_id_show(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t sbp2_sysfs_ieee1394_id_show(struct device *dev, + struct device_attribute *attr, + char *buf) { struct scsi_device *sdev; struct scsi_id_instance_data *scsi_id; @@ -2812,10 +2581,7 @@ static ssize_t sbp2_sysfs_ieee1394_id_show(struct device *dev, struct device_att if (!(scsi_id = (struct scsi_id_instance_data *)sdev->host->hostdata[0])) return 0; - if (scsi_id->sbp2_device_type_and_lun == SBP2_DEVICE_TYPE_LUN_UNINITIALIZED) - lun = 0; - else - lun = ORB_SET_LUN(scsi_id->sbp2_device_type_and_lun); + lun = ORB_SET_LUN(scsi_id->sbp2_lun); return sprintf(buf, "%016Lx:%d:%d\n", (unsigned long long)scsi_id->ne->guid, scsi_id->ud->id, lun); @@ -2837,12 +2603,9 @@ static struct scsi_host_template scsi_driver_template = { .module = THIS_MODULE, .name = "SBP-2 IEEE-1394", .proc_name = SBP2_DEVICE_NAME, - .info = sbp2scsi_info, .queuecommand = sbp2scsi_queuecommand, .eh_abort_handler = sbp2scsi_abort, .eh_device_reset_handler = sbp2scsi_reset, - .eh_bus_reset_handler = sbp2scsi_reset, - .eh_host_reset_handler = sbp2scsi_reset, .slave_alloc = sbp2scsi_slave_alloc, .slave_configure = sbp2scsi_slave_configure, .slave_destroy = sbp2scsi_slave_destroy, @@ -2861,8 +2624,6 @@ static int sbp2_module_init(void) SBP2_DEBUG("sbp2_module_init"); - printk(KERN_INFO "sbp2: %s\n", version); - /* Module load debug option to force one command at a time (serializing I/O) */ if (serialize_io) { SBP2_INFO("Driver forced to serialize I/O (serialize_io=1)"); @@ -2874,7 +2635,6 @@ static int sbp2_module_init(void) /* Set max sectors (module load option). Default is 255 sectors. */ scsi_driver_template.max_sectors = max_sectors; - /* Register our high level driver with 1394 stack */ hpsb_register_highlevel(&sbp2_highlevel); |