summaryrefslogtreecommitdiffstats
path: root/drivers/ieee1394/sbp2.c
diff options
context:
space:
mode:
authorStefan Richter <stefanr@s5r6.in-berlin.de>2006-05-15 22:09:46 +0200
committerLinus Torvalds <torvalds@g5.osdl.org>2006-05-17 21:32:22 -0700
commita54c9d30dbb06391ec4422aaf0e1dc2c8c53bd3e (patch)
treea87b764e94d4ca3f787b076e3f731a67ff68ee71 /drivers/ieee1394/sbp2.c
parent679c0cd2dd61c825ab910fdbf347a8b7d1dddec4 (diff)
downloadop-kernel-dev-a54c9d30dbb06391ec4422aaf0e1dc2c8c53bd3e.zip
op-kernel-dev-a54c9d30dbb06391ec4422aaf0e1dc2c8c53bd3e.tar.gz
[PATCH] ohci1394, sbp2: fix "scsi_add_device failed" with PL-3507 based devices
Re-enable posted writes for status FIFO. Besides bringing back a very minor bandwidth tweak from Linux 2.6.15.x and older, this also fixes an interoperability regression since 2.6.16: http://bugzilla.kernel.org/show_bug.cgi?id=6356 (sbp2: scsi_add_device failed. IEEE1394 HD is not working anymore.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Vanei Heidemann <linux@javanei.com.br> Tested-by: Martin Putzlocher <mputzi@gmx.de> (chip type unconfirmed) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/ieee1394/sbp2.c')
-rw-r--r--drivers/ieee1394/sbp2.c9
1 files changed, 7 insertions, 2 deletions
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 7355580..8a23fb5 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -835,11 +835,16 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
/* Register the status FIFO address range. We could use the same FIFO
* for targets at different nodes. However we need different FIFOs per
- * target in order to support multi-unit devices. */
+ * target in order to support multi-unit devices.
+ * The FIFO is located out of the local host controller's physical range
+ * but, if possible, within the posted write area. Status writes will
+ * then be performed as unified transactions. This slightly reduces
+ * bandwidth usage, and some Prolific based devices seem to require it.
+ */
scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
&sbp2_highlevel, ud->ne->host, &sbp2_ops,
sizeof(struct sbp2_status_block), sizeof(quadlet_t),
- ~0ULL, ~0ULL);
+ 0x010000000000ULL, CSR1212_ALL_SPACE_END);
if (!scsi_id->status_fifo_addr) {
SBP2_ERR("failed to allocate status FIFO address range");
goto failed_alloc;
OpenPOWER on IntegriCloud