summaryrefslogtreecommitdiffstats
path: root/drivers/ieee1394/ieee1394.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/ieee1394/ieee1394.h
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/ieee1394/ieee1394.h')
-rw-r--r--drivers/ieee1394/ieee1394.h202
1 files changed, 202 insertions, 0 deletions
diff --git a/drivers/ieee1394/ieee1394.h b/drivers/ieee1394/ieee1394.h
new file mode 100644
index 0000000..b634a9b
--- /dev/null
+++ b/drivers/ieee1394/ieee1394.h
@@ -0,0 +1,202 @@
+/*
+ * Generic IEEE 1394 definitions
+ */
+
+#ifndef _IEEE1394_IEEE1394_H
+#define _IEEE1394_IEEE1394_H
+
+#define TCODE_WRITEQ 0x0
+#define TCODE_WRITEB 0x1
+#define TCODE_WRITE_RESPONSE 0x2
+#define TCODE_READQ 0x4
+#define TCODE_READB 0x5
+#define TCODE_READQ_RESPONSE 0x6
+#define TCODE_READB_RESPONSE 0x7
+#define TCODE_CYCLE_START 0x8
+#define TCODE_LOCK_REQUEST 0x9
+#define TCODE_ISO_DATA 0xa
+#define TCODE_STREAM_DATA 0xa
+#define TCODE_LOCK_RESPONSE 0xb
+
+#define RCODE_COMPLETE 0x0
+#define RCODE_CONFLICT_ERROR 0x4
+#define RCODE_DATA_ERROR 0x5
+#define RCODE_TYPE_ERROR 0x6
+#define RCODE_ADDRESS_ERROR 0x7
+
+#define EXTCODE_MASK_SWAP 0x1
+#define EXTCODE_COMPARE_SWAP 0x2
+#define EXTCODE_FETCH_ADD 0x3
+#define EXTCODE_LITTLE_ADD 0x4
+#define EXTCODE_BOUNDED_ADD 0x5
+#define EXTCODE_WRAP_ADD 0x6
+
+#define ACK_COMPLETE 0x1
+#define ACK_PENDING 0x2
+#define ACK_BUSY_X 0x4
+#define ACK_BUSY_A 0x5
+#define ACK_BUSY_B 0x6
+#define ACK_TARDY 0xb
+#define ACK_CONFLICT_ERROR 0xc
+#define ACK_DATA_ERROR 0xd
+#define ACK_TYPE_ERROR 0xe
+#define ACK_ADDRESS_ERROR 0xf
+
+/* Non-standard "ACK codes" for internal use */
+#define ACKX_NONE (-1)
+#define ACKX_SEND_ERROR (-2)
+#define ACKX_ABORTED (-3)
+#define ACKX_TIMEOUT (-4)
+
+
+#define IEEE1394_SPEED_100 0x00
+#define IEEE1394_SPEED_200 0x01
+#define IEEE1394_SPEED_400 0x02
+#define IEEE1394_SPEED_800 0x03
+#define IEEE1394_SPEED_1600 0x04
+#define IEEE1394_SPEED_3200 0x05
+/* The current highest tested speed supported by the subsystem */
+#define IEEE1394_SPEED_MAX IEEE1394_SPEED_800
+
+/* Maps speed values above to a string representation */
+extern const char *hpsb_speedto_str[];
+
+
+#define SELFID_PWRCL_NO_POWER 0x0
+#define SELFID_PWRCL_PROVIDE_15W 0x1
+#define SELFID_PWRCL_PROVIDE_30W 0x2
+#define SELFID_PWRCL_PROVIDE_45W 0x3
+#define SELFID_PWRCL_USE_1W 0x4
+#define SELFID_PWRCL_USE_3W 0x5
+#define SELFID_PWRCL_USE_6W 0x6
+#define SELFID_PWRCL_USE_10W 0x7
+
+#define SELFID_PORT_CHILD 0x3
+#define SELFID_PORT_PARENT 0x2
+#define SELFID_PORT_NCONN 0x1
+#define SELFID_PORT_NONE 0x0
+
+
+/* 1394a PHY bitmasks */
+#define PHY_00_PHYSICAL_ID 0xFC
+#define PHY_00_R 0x02 /* Root */
+#define PHY_00_PS 0x01 /* Power Status*/
+#define PHY_01_RHB 0x80 /* Root Hold-Off */
+#define PHY_01_IBR 0x80 /* Initiate Bus Reset */
+#define PHY_01_GAP_COUNT 0x3F
+#define PHY_02_EXTENDED 0xE0 /* 0x7 for 1394a-compliant PHY */
+#define PHY_02_TOTAL_PORTS 0x1F
+#define PHY_03_MAX_SPEED 0xE0
+#define PHY_03_DELAY 0x0F
+#define PHY_04_LCTRL 0x80 /* Link Active Report Control */
+#define PHY_04_CONTENDER 0x40
+#define PHY_04_JITTER 0x38
+#define PHY_04_PWR_CLASS 0x07 /* Power Class */
+#define PHY_05_WATCHDOG 0x80
+#define PHY_05_ISBR 0x40 /* Initiate Short Bus Reset */
+#define PHY_05_LOOP 0x20 /* Loop Detect */
+#define PHY_05_PWR_FAIL 0x10 /* Cable Power Failure Detect */
+#define PHY_05_TIMEOUT 0x08 /* Arbitration State Machine Timeout */
+#define PHY_05_PORT_EVENT 0x04 /* Port Event Detect */
+#define PHY_05_ENAB_ACCEL 0x02 /* Enable Arbitration Acceleration */
+#define PHY_05_ENAB_MULTI 0x01 /* Ena. Multispeed Packet Concatenation */
+
+#include <asm/byteorder.h>
+
+#ifdef __BIG_ENDIAN_BITFIELD
+
+struct selfid {
+ u32 packet_identifier:2; /* always binary 10 */
+ u32 phy_id:6;
+ /* byte */
+ u32 extended:1; /* if true is struct ext_selfid */
+ u32 link_active:1;
+ u32 gap_count:6;
+ /* byte */
+ u32 speed:2;
+ u32 phy_delay:2;
+ u32 contender:1;
+ u32 power_class:3;
+ /* byte */
+ u32 port0:2;
+ u32 port1:2;
+ u32 port2:2;
+ u32 initiated_reset:1;
+ u32 more_packets:1;
+} __attribute__((packed));
+
+struct ext_selfid {
+ u32 packet_identifier:2; /* always binary 10 */
+ u32 phy_id:6;
+ /* byte */
+ u32 extended:1; /* if false is struct selfid */
+ u32 seq_nr:3;
+ u32 reserved:2;
+ u32 porta:2;
+ /* byte */
+ u32 portb:2;
+ u32 portc:2;
+ u32 portd:2;
+ u32 porte:2;
+ /* byte */
+ u32 portf:2;
+ u32 portg:2;
+ u32 porth:2;
+ u32 reserved2:1;
+ u32 more_packets:1;
+} __attribute__((packed));
+
+#elif defined __LITTLE_ENDIAN_BITFIELD /* __BIG_ENDIAN_BITFIELD */
+
+/*
+ * Note: these mean to be bit fields of a big endian SelfID as seen on a little
+ * endian machine. Without swapping.
+ */
+
+struct selfid {
+ u32 phy_id:6;
+ u32 packet_identifier:2; /* always binary 10 */
+ /* byte */
+ u32 gap_count:6;
+ u32 link_active:1;
+ u32 extended:1; /* if true is struct ext_selfid */
+ /* byte */
+ u32 power_class:3;
+ u32 contender:1;
+ u32 phy_delay:2;
+ u32 speed:2;
+ /* byte */
+ u32 more_packets:1;
+ u32 initiated_reset:1;
+ u32 port2:2;
+ u32 port1:2;
+ u32 port0:2;
+} __attribute__((packed));
+
+struct ext_selfid {
+ u32 phy_id:6;
+ u32 packet_identifier:2; /* always binary 10 */
+ /* byte */
+ u32 porta:2;
+ u32 reserved:2;
+ u32 seq_nr:3;
+ u32 extended:1; /* if false is struct selfid */
+ /* byte */
+ u32 porte:2;
+ u32 portd:2;
+ u32 portc:2;
+ u32 portb:2;
+ /* byte */
+ u32 more_packets:1;
+ u32 reserved2:1;
+ u32 porth:2;
+ u32 portg:2;
+ u32 portf:2;
+} __attribute__((packed));
+
+#else
+#error What? PDP endian?
+#endif /* __BIG_ENDIAN_BITFIELD */
+
+
+#endif /* _IEEE1394_IEEE1394_H */
OpenPOWER on IntegriCloud