ieee1394: ignore nonzero Bus_Info_Block.max_rom, fetch config ROM in quadlets

It is already known that buggy firmwares exist which report a bogus
link_spd in their config ROM bus info block.  We now got the first
report of a bogus max_rom too (Freecom FireWire Hard Drive 1TB,
http://bugzilla.kernel.org/show_bug.cgi?id=12206).

I suspect other OSs only use quadlet reads to fetch the config ROM,
otherwise the firmware authors would have noticed their mistake.
Hence limit ieee1394's config ROM fetching routine to quadlets as the
safe minimum regardless of what the bus info block says.

This will potentially slow the bus reset handling by nodemgr somewhat
down.  But most existing devices support only quadlet reads anyway,
hence there will often be no actual difference to before this change.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

1 files changed, 14 insertions, 31 deletions

diff --git a/drivers/ieee1394/csr1212.c b/drivers/ieee1394/csr1212.c
index 5e38a68..a6dfeb0 100644
--- a/drivers/ieee1394/csr1212.c
+++ b/drivers/ieee1394/csr1212.c
@@ -1077,15 +1077,10 @@ static int csr1212_parse_bus_info_block(struct csr1212_csr *csr)
 	int i;
 	int ret;
 
-	/* IEEE 1212 says that the entire bus info block should be readable in
-	 * a single transaction regardless of the max_rom value.
-	 * Unfortunately, many IEEE 1394 devices do not abide by that, so the
-	 * bus info block will be read 1 quadlet at a time.  The rest of the
-	 * ConfigROM will be read according to the max_rom field. */
 	for (i = 0; i < csr->bus_info_len; i += sizeof(u32)) {
 		ret = csr->ops->bus_read(csr, CSR1212_CONFIG_ROM_SPACE_BASE + i,
-			sizeof(u32), &csr->cache_head->data[bytes_to_quads(i)],
-			csr->private);
+				&csr->cache_head->data[bytes_to_quads(i)],
+				csr->private);
 		if (ret != CSR1212_SUCCESS)
 			return ret;
 
@@ -1104,8 +1099,8 @@ static int csr1212_parse_bus_info_block(struct csr1212_csr *csr)
 	 * a time. */
 	for (i = csr->bus_info_len; i <= csr->crc_len; i += sizeof(u32)) {
 		ret = csr->ops->bus_read(csr, CSR1212_CONFIG_ROM_SPACE_BASE + i,
-			sizeof(u32), &csr->cache_head->data[bytes_to_quads(i)],
-			csr->private);
+				&csr->cache_head->data[bytes_to_quads(i)],
+				csr->private);
 		if (ret != CSR1212_SUCCESS)
 			return ret;
 	}
@@ -1289,7 +1284,7 @@ csr1212_read_keyval(struct csr1212_csr *csr, struct csr1212_keyval *kv)
 
 		if (csr->ops->bus_read(csr,
 				       CSR1212_REGISTER_SPACE_BASE + kv->offset,
-				       sizeof(u32), &q, csr->private))
+				       &q, csr->private))
 			return -EIO;
 
 		kv->value.leaf.len = be32_to_cpu(q) >> 16;
@@ -1372,17 +1367,8 @@ csr1212_read_keyval(struct csr1212_csr *csr, struct csr1212_keyval *kv)
 		addr = (CSR1212_CSR_ARCH_REG_SPACE_BASE + cache->offset +
 			cr->offset_end) & ~(csr->max_rom - 1);
 
-		if (csr->ops->bus_read(csr, addr, csr->max_rom, cache_ptr,
-				       csr->private)) {
-			if (csr->max_rom == 4)
-				/* We've got problems! */
-				return -EIO;
-
-			/* Apperently the max_rom value was a lie, set it to
-			 * do quadlet reads and try again. */
-			csr->max_rom = 4;
-			continue;
-		}
+		if (csr->ops->bus_read(csr, addr, cache_ptr, csr->private))
+			return -EIO;
 
 		cr->offset_end += csr->max_rom - (cr->offset_end &
 						  (csr->max_rom - 1));
@@ -1433,7 +1419,6 @@ csr1212_get_keyval(struct csr1212_csr *csr, struct csr1212_keyval *kv)
 
 int csr1212_parse_csr(struct csr1212_csr *csr)
 {
-	static const int mr_map[] = { 4, 64, 1024, 0 };
 	struct csr1212_dentry *dentry;
 	int ret;
 
@@ -1443,15 +1428,13 @@ int csr1212_parse_csr(struct csr1212_csr *csr)
 	if (ret != CSR1212_SUCCESS)
 		return ret;
 
-	if (!csr->ops->get_max_rom) {
-		csr->max_rom = mr_map[0];	/* default value */
-	} else {
-		int i = csr->ops->get_max_rom(csr->bus_info_data,
-					      csr->private);
-		if (i & ~0x3)
-			return -EINVAL;
-		csr->max_rom = mr_map[i];
-	}
+	/*
+	 * There has been a buggy firmware with bus_info_block.max_rom > 0
+	 * spotted which actually only supported quadlet read requests to the
+	 * config ROM.  Therefore read everything quadlet by quadlet regardless
+	 * of what the bus info block says.
+	 */
+	csr->max_rom = 4;
 
 	csr->cache_head->layout_head = csr->root_kv;
 	csr->cache_head->layout_tail = csr->root_kv;