summaryrefslogtreecommitdiffstats
path: root/drivers/ieee1394/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/ieee1394/Kconfig
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/ieee1394/Kconfig')
-rw-r--r--drivers/ieee1394/Kconfig188
1 files changed, 188 insertions, 0 deletions
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
new file mode 100644
index 0000000..78b201f
--- /dev/null
+++ b/drivers/ieee1394/Kconfig
@@ -0,0 +1,188 @@
+# -*- shell-script -*-
+
+menu "IEEE 1394 (FireWire) support"
+
+config IEEE1394
+ tristate "IEEE 1394 (FireWire) support"
+ depends on PCI || BROKEN
+ select NET
+ help
+ IEEE 1394 describes a high performance serial bus, which is also
+ known as FireWire(tm) or i.Link(tm) and is used for connecting all
+ sorts of devices (most notably digital video cameras) to your
+ computer.
+
+ If you have FireWire hardware and want to use it, say Y here. This
+ is the core support only, you will also need to select a driver for
+ your IEEE 1394 adapter.
+
+ To compile this driver as a module, say M here: the
+ module will be called ieee1394.
+
+comment "Subsystem Options"
+ depends on IEEE1394
+
+config IEEE1394_VERBOSEDEBUG
+ bool "Excessive debugging output"
+ depends on IEEE1394
+ help
+ If you say Y here, you will get very verbose debugging logs from
+ the subsystem which includes a dump of the header of every sent
+ and received packet. This can amount to a high amount of data
+ collected in a very short time which is usually also saved to
+ disk by the system logging daemons.
+
+ Say Y if you really want or need the debugging output, everyone
+ else says N.
+
+config IEEE1394_OUI_DB
+ bool "OUI Database built-in"
+ depends on IEEE1394
+ help
+ If you say Y here, then an OUI list (vendor unique ID's) will be
+ compiled into the ieee1394 module. This doesn't really do much
+ except being able to display the vendor of a hardware node. The
+ downside is that it adds about 300k to the size of the module,
+ or kernel (depending on whether you compile ieee1394 as a
+ module, or static in the kernel).
+
+ This option is not needed for userspace programs like gscanbus
+ to show this information.
+
+config IEEE1394_EXTRA_CONFIG_ROMS
+ bool "Build in extra config rom entries for certain functionality"
+ depends on IEEE1394
+ help
+ Some IEEE1394 functionality depends on extra config rom entries
+ being available in the host adapters CSR. These options will
+ allow you to choose which ones.
+
+config IEEE1394_CONFIG_ROM_IP1394
+ bool "IP-1394 Entry"
+ depends on IEEE1394_EXTRA_CONFIG_ROMS && IEEE1394
+ help
+ Adds an entry for using IP-over-1394. If you want to use your
+ IEEE1394 bus as a network for IP systems (including interacting
+ with MacOSX and WinXP IP-over-1394), enable this option and the
+ eth1394 option below.
+
+comment "Device Drivers"
+ depends on IEEE1394
+
+comment "Texas Instruments PCILynx requires I2C"
+ depends on IEEE1394 && I2C=n
+
+config IEEE1394_PCILYNX
+ tristate "Texas Instruments PCILynx support"
+ depends on PCI && IEEE1394 && I2C
+ select I2C_ALGOBIT
+ help
+ Say Y here if you have an IEEE-1394 controller with the Texas
+ Instruments PCILynx chip. Note: this driver is written for revision
+ 2 of this chip and may not work with revision 0.
+
+ To compile this driver as a module, say M here: the
+ module will be called pcilynx.
+
+# Non-maintained pcilynx options
+# if [ "$CONFIG_IEEE1394_PCILYNX" != "n" ]; then
+# bool ' Use PCILynx local RAM' CONFIG_IEEE1394_PCILYNX_LOCALRAM
+# bool ' Support for non-IEEE1394 local ports' CONFIG_IEEE1394_PCILYNX_PORTS
+# fi
+config IEEE1394_OHCI1394
+ tristate "OHCI-1394 support"
+ depends on PCI && IEEE1394
+ help
+ Enable this driver if you have an IEEE 1394 controller based on the
+ OHCI-1394 specification. The current driver is only tested with OHCI
+ chipsets made by Texas Instruments and NEC. Most third-party vendors
+ use one of these chipsets. It should work with any OHCI-1394
+ compliant card, however.
+
+ To compile this driver as a module, say M here: the
+ module will be called ohci1394.
+
+comment "Protocol Drivers"
+ depends on IEEE1394
+
+config IEEE1394_VIDEO1394
+ tristate "OHCI-1394 Video support"
+ depends on IEEE1394 && IEEE1394_OHCI1394
+ help
+ This option enables video device usage for OHCI-1394 cards. Enable
+ this option only if you have an IEEE 1394 video device connected to
+ an OHCI-1394 card.
+
+config IEEE1394_SBP2
+ tristate "SBP-2 support (Harddisks etc.)"
+ depends on IEEE1394 && SCSI && (PCI || BROKEN)
+ help
+ This option enables you to use SBP-2 devices connected to your IEEE
+ 1394 bus. SBP-2 devices include harddrives and DVD devices.
+
+config IEEE1394_SBP2_PHYS_DMA
+ bool "Enable Phys DMA support for SBP2 (Debug)"
+ depends on IEEE1394 && IEEE1394_SBP2
+
+config IEEE1394_ETH1394
+ tristate "Ethernet over 1394"
+ depends on IEEE1394 && EXPERIMENTAL && INET
+ select IEEE1394_CONFIG_ROM_IP1394
+ select IEEE1394_EXTRA_CONFIG_ROMS
+ help
+ This driver implements a functional majority of RFC 2734: IPv4 over
+ 1394. It will provide IP connectivity with implementations of RFC
+ 2734 found on other operating systems. It will not communicate with
+ older versions of this driver found in stock kernels prior to 2.6.3.
+ This driver is still considered experimental. It does not yet support
+ MCAP, therefore multicast support is significantly limited.
+
+config IEEE1394_DV1394
+ tristate "OHCI-DV I/O support"
+ depends on IEEE1394 && IEEE1394_OHCI1394
+ help
+ This driver allows you to transmit and receive DV (digital video)
+ streams on an OHCI-1394 card using a simple frame-oriented
+ interface.
+
+ The user-space API for dv1394 is documented in dv1394.h.
+
+ To compile this driver as a module, say M here: the
+ module will be called dv1394.
+
+config IEEE1394_RAWIO
+ tristate "Raw IEEE1394 I/O support"
+ depends on IEEE1394
+ help
+ Say Y here if you want support for the raw device. This is generally
+ a good idea, so you should say Y here. The raw device enables
+ direct communication of user programs with the IEEE 1394 bus and
+ thus with the attached peripherals.
+
+ To compile this driver as a module, say M here: the
+ module will be called raw1394.
+
+config IEEE1394_CMP
+ tristate "IEC61883-1 Plug support"
+ depends on IEEE1394
+ help
+ This option enables the Connection Management Procedures
+ (IEC61883-1) driver, which implements input and output plugs.
+
+ To compile this driver as a module, say M here: the
+ module will be called cmp.
+
+config IEEE1394_AMDTP
+ tristate "IEC61883-6 (Audio transmission) support"
+ depends on IEEE1394 && IEEE1394_OHCI1394 && IEEE1394_CMP
+ help
+ This option enables the Audio & Music Data Transmission Protocol
+ (IEC61883-6) driver, which implements audio transmission over
+ IEEE1394.
+
+ The userspace interface is documented in amdtp.h.
+
+ To compile this driver as a module, say M here: the
+ module will be called amdtp.
+
+endmenu
OpenPOWER on IntegriCloud