diff options
| author | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2007-03-26 23:03:18 +0200 |
|---|---|---|
| committer | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2007-03-26 23:03:18 +0200 |
| commit | f68d9320cd06fdec19735143b42e5197b63165b4 (patch) | |
| tree | 6749bcf98762a467d1a254b9b50f462b1294050e /drivers/ide | |
| parent | e0f2e3a06be513352cb4955313ed7e55909acd84 (diff) | |
| download | op-kernel-dev-f68d9320cd06fdec19735143b42e5197b63165b4.zip op-kernel-dev-f68d9320cd06fdec19735143b42e5197b63165b4.tar.gz | |
ide: revert "ide: fix drive side 80c cable check, take 2" for now
"ide: fix drive side 80c cable check, take 2" patch from Tejun Heo (commit
fab59375b9543f84d1714f7dd00f5d11e531bd3e) fixed 80c bit test (bit13 of word93)
but we also need to fix master/slave IDENTIFY order (slave device should be
probed first in order to make it release PDIAG- signal) and we should also
check for pre-ATA3 slave devices (which may not release PDIAG- signal).
[ Unfortunately the fact that IDE driver doesn't reset devices itself helps
only a bit as it seems that some BIOS-es reset ATA devices after programming
the chipset, some BIOS-es can be set to not probe/configure selected devices,
there may be no BIOS in case of add-on cards etc. ]
Since we are quite late in the release cycle and the required changes will
affect a lot of systems just revert the fix for now.
[ Please also see libata commit f31f0cc2f0b7527072d94d02da332d9bb8d7d94c. ]
Thanks goes out to Fernando Mitio Yamada for reporting the problem
and patiently testing patches.
Acked-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide')
| -rw-r--r-- | drivers/ide/ide-iops.c | 8 |
1 files changed, 6 insertions, 2 deletions
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index bd513f5..5523c52 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -583,8 +583,12 @@ u8 eighty_ninty_three (ide_drive_t *drive) if(!(drive->id->hw_config & 0x4000)) return 0; #endif /* CONFIG_IDEDMA_IVB */ - if (!(drive->id->hw_config & 0x2000)) - return 0; + /* + * FIXME: + * - change master/slave IDENTIFY order + * - force bit13 (80c cable present) check + * (unless the slave device is pre-ATA3) + */ return 1; } |
