summaryrefslogtreecommitdiffstats
path: root/drivers/ide
diff options
context:
space:
mode:
authorSergei Shtylyov <sshtylyov@ru.mvista.com>2007-02-07 18:18:05 +0100
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-02-07 18:18:05 +0100
commitabc4ad4c6b3c6a51a0aa633e3d3fbc80b0ecabfe (patch)
tree45adfdd195a639672bde7d61dad4c3bd8a42ec3e /drivers/ide
parentb4586715d7944dfbcb2b6b76a0098413cf3222e4 (diff)
downloadop-kernel-dev-abc4ad4c6b3c6a51a0aa633e3d3fbc80b0ecabfe.zip
op-kernel-dev-abc4ad4c6b3c6a51a0aa633e3d3fbc80b0ecabfe.tar.gz
hpt366: cache channel's MCR address
Begin the real driver redesign. For the starters: - cache the offset of the IDE channel's MISC. control registers which are used throughout the driver in hwif->select_data; - only touch the relevant MCR when detecting the cable type on HPT374's function 1; - make HPT36x's speedproc handler look the same way as HPT37x ones; fix the PIO timing register mask for HPT37x. - rename all the HPT3xx register related variables consistently; clean up the whitespace. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/pci/hpt366.c371
1 files changed, 181 insertions, 190 deletions
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 577aef9..fd15329 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/hpt366.c Version 0.45 May 27, 2006
+ * linux/drivers/ide/pci/hpt366.c Version 0.50 May 28, 2006
*
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
@@ -80,6 +80,11 @@
* - claim the extra 240 bytes of I/O space for all chips
* - optimize the rate masking/filtering and the drive list lookup code
* - use pci_get_slot() to get to the function 1 of HPT36x/374
+ * - cache the channel's MCRs' offset; only touch the relevant MCR when detecting
+ * the cable type on HPT374's function 1
+ * - rename all the register related variables consistently
+ * - make HPT36x's speedproc handler look the same way as HPT37x ones; fix the
+ * PIO timing register mask for HPT37x
* <source@mvista.com>
*
*/
@@ -497,109 +502,106 @@ static u32 pci_bus_clock_list(u8 speed, u32 *chipset_table)
static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = hwif->pci_dev;
- struct hpt_info *info = ide_get_hwifdata(hwif);
- u8 speed = hpt3xx_ratefilter(drive, xferspeed);
- u8 regtime = (drive->select.b.unit & 0x01) ? 0x44 : 0x40;
- u8 regfast = (hwif->channel) ? 0x55 : 0x51;
- u8 drive_fast = 0;
- u32 reg1 = 0, reg2 = 0;
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+ struct hpt_info *info = ide_get_hwifdata (hwif);
+ u8 speed = hpt3xx_ratefilter(drive, xferspeed);
+ u8 itr_addr = drive->dn ? 0x44 : 0x40;
+ u8 mcr_addr = hwif->select_data + 1;
+ u8 mcr = 0;
+ u32 new_itr, old_itr = 0;
+ u32 itr_mask = (speed < XFER_MW_DMA_0) ? 0x30070000 : 0xc0000000;
/*
* Disable the "fast interrupt" prediction.
*/
- pci_read_config_byte(dev, regfast, &drive_fast);
- if (drive_fast & 0x80)
- pci_write_config_byte(dev, regfast, drive_fast & ~0x80);
+ pci_read_config_byte(dev, mcr_addr, &mcr);
+ if (mcr & 0x80)
+ pci_write_config_byte(dev, mcr_addr, mcr & ~0x80);
- reg2 = pci_bus_clock_list(speed, info->speed);
+ new_itr = pci_bus_clock_list(speed, info->speed);
/*
- * Disable on-chip PIO FIFO/buffer
- * (to avoid problems handling I/O errors later)
+ * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well)
+ * to avoid problems handling I/O errors later
*/
- pci_read_config_dword(dev, regtime, &reg1);
- if (speed >= XFER_MW_DMA_0) {
- reg2 = (reg2 & ~0xc0000000) | (reg1 & 0xc0000000);
- } else {
- reg2 = (reg2 & ~0x30070000) | (reg1 & 0x30070000);
- }
- reg2 &= ~0x80000000;
+ pci_read_config_dword(dev, itr_addr, &old_itr);
+ new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
+ new_itr &= ~0xc0000000;
- pci_write_config_dword(dev, regtime, reg2);
+ pci_write_config_dword(dev, itr_addr, new_itr);
return ide_config_drive_speed(drive, speed);
}
static int hpt370_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = hwif->pci_dev;
- struct hpt_info *info = ide_get_hwifdata(hwif);
- u8 speed = hpt3xx_ratefilter(drive, xferspeed);
- u8 regfast = (drive->hwif->channel) ? 0x55 : 0x51;
- u8 drive_pci = 0x40 + (drive->dn * 4);
- u8 new_fast = 0, drive_fast = 0;
- u32 list_conf = 0, drive_conf = 0;
- u32 conf_mask = (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000;
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+ struct hpt_info *info = ide_get_hwifdata (hwif);
+ u8 speed = hpt3xx_ratefilter(drive, xferspeed);
+ u8 mcr_addr = hwif->select_data + 1;
+ u8 itr_addr = 0x40 + (drive->dn * 4);
+ u8 new_mcr = 0, old_mcr = 0;
+ u32 new_itr, old_itr = 0;
+ u32 itr_mask = (speed < XFER_MW_DMA_0) ? 0x303c0000 : 0xc0000000;
/*
* Disable the "fast interrupt" prediction.
* don't holdoff on interrupts. (== 0x01 despite what the docs say)
*/
- pci_read_config_byte(dev, regfast, &drive_fast);
- new_fast = drive_fast;
- if (new_fast & 0x02)
- new_fast &= ~0x02;
+ pci_read_config_byte(dev, mcr_addr, &old_mcr);
+ new_mcr = old_mcr;
+ if (new_mcr & 0x02)
+ new_mcr &= ~0x02;
#ifdef HPT_DELAY_INTERRUPT
- if (new_fast & 0x01)
- new_fast &= ~0x01;
+ if (new_mcr & 0x01)
+ new_mcr &= ~0x01;
#else
- if ((new_fast & 0x01) == 0)
- new_fast |= 0x01;
+ if ((new_mcr & 0x01) == 0)
+ new_mcr |= 0x01;
#endif
- if (new_fast != drive_fast)
- pci_write_config_byte(dev, regfast, new_fast);
+ if (new_mcr != old_mcr)
+ pci_write_config_byte(dev, mcr_addr, new_mcr);
- list_conf = pci_bus_clock_list(speed, info->speed);
+ new_itr = pci_bus_clock_list(speed, info->speed);
- pci_read_config_dword(dev, drive_pci, &drive_conf);
- list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask);
+ pci_read_config_dword(dev, itr_addr, &old_itr);
+ new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
if (speed < XFER_MW_DMA_0)
- list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
- pci_write_config_dword(dev, drive_pci, list_conf);
+ new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
+ pci_write_config_dword(dev, itr_addr, new_itr);
return ide_config_drive_speed(drive, speed);
}
static int hpt372_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = hwif->pci_dev;
- struct hpt_info *info = ide_get_hwifdata(hwif);
- u8 speed = hpt3xx_ratefilter(drive, xferspeed);
- u8 regfast = (drive->hwif->channel) ? 0x55 : 0x51;
- u8 drive_fast = 0, drive_pci = 0x40 + (drive->dn * 4);
- u32 list_conf = 0, drive_conf = 0;
- u32 conf_mask = (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000;
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+ struct hpt_info *info = ide_get_hwifdata (hwif);
+ u8 speed = hpt3xx_ratefilter(drive, xferspeed);
+ u8 mcr_addr = hwif->select_data + 1;
+ u8 itr_addr = 0x40 + (drive->dn * 4);
+ u8 mcr = 0;
+ u32 new_itr, old_itr = 0;
+ u32 itr_mask = (speed < XFER_MW_DMA_0) ? 0x303c0000 : 0xc0000000;
/*
* Disable the "fast interrupt" prediction.
* don't holdoff on interrupts. (== 0x01 despite what the docs say)
*/
- pci_read_config_byte(dev, regfast, &drive_fast);
- drive_fast &= ~0x07;
- pci_write_config_byte(dev, regfast, drive_fast);
+ pci_read_config_byte (dev, mcr_addr, &mcr);
+ pci_write_config_byte(dev, mcr_addr, (mcr & ~0x07));
- list_conf = pci_bus_clock_list(speed, info->speed);
- pci_read_config_dword(dev, drive_pci, &drive_conf);
- list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask);
+ new_itr = pci_bus_clock_list(speed, info->speed);
+ pci_read_config_dword(dev, itr_addr, &old_itr);
+ new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
if (speed < XFER_MW_DMA_0)
- list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
- pci_write_config_dword(dev, drive_pci, list_conf);
+ new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
+ pci_write_config_dword(dev, itr_addr, new_itr);
return ide_config_drive_speed(drive, speed);
}
@@ -666,39 +668,41 @@ static int hpt3xx_quirkproc(ide_drive_t *drive)
static void hpt3xx_intrproc (ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = HWIF(drive);
if (drive->quirk_list)
return;
/* drives in the quirk_list may not like intr setups/cleanups */
- hwif->OUTB(drive->ctl|2, IDE_CONTROL_REG);
+ hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
}
static void hpt3xx_maskproc (ide_drive_t *drive, int mask)
{
- ide_hwif_t *hwif = drive->hwif;
- struct hpt_info *info = ide_get_hwifdata(hwif);
- struct pci_dev *dev = hwif->pci_dev;
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+ struct hpt_info *info = ide_get_hwifdata(hwif);
if (drive->quirk_list) {
if (info->revision >= 3) {
- u8 reg5a = 0;
- pci_read_config_byte(dev, 0x5a, &reg5a);
- if (((reg5a & 0x10) >> 4) != mask)
- pci_write_config_byte(dev, 0x5a, mask ? (reg5a | 0x10) : (reg5a & ~0x10));
+ u8 scr1 = 0;
+
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ if (((scr1 & 0x10) >> 4) != mask) {
+ if (mask)
+ scr1 |= 0x10;
+ else
+ scr1 &= ~0x10;
+ pci_write_config_byte(dev, 0x5a, scr1);
+ }
} else {
- if (mask) {
+ if (mask)
disable_irq(hwif->irq);
- } else {
- enable_irq(hwif->irq);
- }
+ else
+ enable_irq (hwif->irq);
}
- } else {
- if (IDE_CONTROL_REG)
- hwif->OUTB(mask ? (drive->ctl | 2) :
- (drive->ctl & ~2),
- IDE_CONTROL_REG);
- }
+ } else
+ hwif->OUTB(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
+ IDE_CONTROL_REG);
}
static int hpt366_config_drive_xfer_rate (ide_drive_t *drive)
@@ -727,28 +731,29 @@ fast_ata_pio:
}
/*
- * This is specific to the HPT366 UDMA bios chipset
+ * This is specific to the HPT366 UDMA chipset
* by HighPoint|Triones Technologies, Inc.
*/
-static int hpt366_ide_dma_lostirq (ide_drive_t *drive)
+static int hpt366_ide_dma_lostirq(ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
- u8 reg50h = 0, reg52h = 0, reg5ah = 0;
-
- pci_read_config_byte(dev, 0x50, &reg50h);
- pci_read_config_byte(dev, 0x52, &reg52h);
- pci_read_config_byte(dev, 0x5a, &reg5ah);
- printk("%s: (%s) reg50h=0x%02x, reg52h=0x%02x, reg5ah=0x%02x\n",
- drive->name, __FUNCTION__, reg50h, reg52h, reg5ah);
- if (reg5ah & 0x10)
- pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10);
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
+ u8 mcr1 = 0, mcr3 = 0, scr1 = 0;
+
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ pci_read_config_byte(dev, 0x52, &mcr3);
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n",
+ drive->name, __FUNCTION__, mcr1, mcr3, scr1);
+ if (scr1 & 0x10)
+ pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
return __ide_dma_lostirq(drive);
}
static void hpt370_clear_engine (ide_drive_t *drive)
{
- u8 regstate = HWIF(drive)->channel ? 0x54 : 0x50;
- pci_write_config_byte(HWIF(drive)->pci_dev, regstate, 0x37);
+ ide_hwif_t *hwif = HWIF(drive);
+
+ pci_write_config_byte(hwif->pci_dev, hwif->select_data, 0x37);
udelay(10);
}
@@ -780,10 +785,10 @@ static int hpt370_ide_dma_end (ide_drive_t *drive)
static void hpt370_lostirq_timeout (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- u8 bfifo = 0, reginfo = hwif->channel ? 0x56 : 0x52;
+ u8 bfifo = 0;
u8 dma_stat = 0, dma_cmd = 0;
- pci_read_config_byte(HWIF(drive)->pci_dev, reginfo, &bfifo);
+ pci_read_config_byte(HWIF(drive)->pci_dev, hwif->select_data + 2, &bfifo);
printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo);
hpt370_clear_engine(drive);
/* get dma command mode */
@@ -814,10 +819,9 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u16 bfifo = 0;
- u8 reginfo = hwif->channel ? 0x56 : 0x52;
- u8 dma_stat;
+ u8 dma_stat;
- pci_read_config_word(hwif->pci_dev, reginfo, &bfifo);
+ pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo);
if (bfifo & 0x1FF) {
// printk("%s: %d bytes in FIFO\n", drive->name, bfifo);
return 0;
@@ -825,7 +829,7 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
dma_stat = hwif->INB(hwif->dma_status);
/* return 1 if INTR asserted */
- if ((dma_stat & 4) == 4)
+ if (dma_stat & 4)
return 1;
if (!drive->waiting_for_dma)
@@ -834,17 +838,17 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
return 0;
}
-static int hpt374_ide_dma_end (ide_drive_t *drive)
+static int hpt374_ide_dma_end(ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
ide_hwif_t *hwif = HWIF(drive);
- u8 msc_stat = 0, mscreg = hwif->channel ? 0x54 : 0x50;
- u8 bwsr_stat = 0, bwsr_mask = hwif->channel ? 0x02 : 0x01;
-
- pci_read_config_byte(dev, 0x6a, &bwsr_stat);
- pci_read_config_byte(dev, mscreg, &msc_stat);
- if ((bwsr_stat & bwsr_mask) == bwsr_mask)
- pci_write_config_byte(dev, mscreg, msc_stat|0x30);
+ struct pci_dev *dev = hwif->pci_dev;
+ u8 mcr = 0, mcr_addr = hwif->select_data;
+ u8 bwsr = 0, mask = hwif->channel ? 0x02 : 0x01;
+
+ pci_read_config_byte(dev, 0x6a, &bwsr);
+ pci_read_config_byte(dev, mcr_addr, &mcr);
+ if (bwsr & mask)
+ pci_write_config_byte(dev, mcr_addr, mcr | 0x30);
return __ide_dma_end(drive);
}
@@ -910,6 +914,7 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
/*
* Set/get power state for a drive.
+ * NOTE: affects both drives on each channel.
*
* When we turn the power back on, we need to re-initialize things.
*/
@@ -917,26 +922,18 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
static int hpt3xx_busproc(ide_drive_t *drive, int state)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- u8 tristate, resetmask, bus_reg = 0;
- u16 tri_reg = 0;
+ u8 mcr_addr = hwif->select_data + 2;
+ u8 resetmask = hwif->channel ? 0x80 : 0x40;
+ u8 bsr2 = 0;
+ u16 mcr = 0;
hwif->bus_state = state;
- if (hwif->channel) {
- /* secondary channel */
- tristate = 0x56;
- resetmask = 0x80;
- } else {
- /* primary channel */
- tristate = 0x52;
- resetmask = 0x40;
- }
-
/* Grab the status. */
- pci_read_config_word(dev, tristate, &tri_reg);
- pci_read_config_byte(dev, 0x59, &bus_reg);
+ pci_read_config_word(dev, mcr_addr, &mcr);
+ pci_read_config_byte(dev, 0x59, &bsr2);
/*
* Set the state. We don't set it if we don't need to do so.
@@ -944,22 +941,22 @@ static int hpt3xx_busproc(ide_drive_t *drive, int state)
*/
switch (state) {
case BUSSTATE_ON:
- if (!(bus_reg & resetmask))
+ if (!(bsr2 & resetmask))
return 0;
hwif->drives[0].failures = hwif->drives[1].failures = 0;
- pci_write_config_byte(dev, 0x59, bus_reg & ~resetmask);
- pci_write_config_word(dev, tristate, tri_reg & ~TRISTATE_BIT);
+ pci_write_config_byte(dev, 0x59, bsr2 & ~resetmask);
+ pci_write_config_word(dev, mcr_addr, mcr & ~TRISTATE_BIT);
return 0;
case BUSSTATE_OFF:
- if ((bus_reg & resetmask) && !(tri_reg & TRISTATE_BIT))
+ if ((bsr2 & resetmask) && !(mcr & TRISTATE_BIT))
return 0;
- tri_reg &= ~TRISTATE_BIT;
+ mcr &= ~TRISTATE_BIT;
break;
case BUSSTATE_TRISTATE:
- if ((bus_reg & resetmask) && (tri_reg & TRISTATE_BIT))
+ if ((bsr2 & resetmask) && (mcr & TRISTATE_BIT))
return 0;
- tri_reg |= TRISTATE_BIT;
+ mcr |= TRISTATE_BIT;
break;
default:
return -EINVAL;
@@ -968,20 +965,20 @@ static int hpt3xx_busproc(ide_drive_t *drive, int state)
hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
- pci_write_config_word(dev, tristate, tri_reg);
- pci_write_config_byte(dev, 0x59, bus_reg | resetmask);
+ pci_write_config_word(dev, mcr_addr, mcr);
+ pci_write_config_byte(dev, 0x59, bsr2 | resetmask);
return 0;
}
static void __devinit hpt366_clocking(ide_hwif_t *hwif)
{
- u32 reg1 = 0;
+ u32 itr1 = 0;
struct hpt_info *info = ide_get_hwifdata(hwif);
- pci_read_config_dword(hwif->pci_dev, 0x40, &reg1);
+ pci_read_config_dword(hwif->pci_dev, 0x40, &itr1);
/* detect bus speed by looking at control reg timing: */
- switch((reg1 >> 8) & 7) {
+ switch((itr1 >> 8) & 7) {
case 5:
info->speed = forty_base_hpt36x;
break;
@@ -1003,7 +1000,7 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif)
int adjust, i;
u16 freq = 0;
u32 pll, temp = 0;
- u8 reg5bh = 0, mcr1 = 0;
+ u8 scr2 = 0, mcr1 = 0;
/*
* default to pci clock. make sure MA15/16 are set to output
@@ -1116,13 +1113,13 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif)
/* wait for clock stabilization */
for (i = 0; i < 0x50000; i++) {
- pci_read_config_byte(dev, 0x5b, &reg5bh);
- if (reg5bh & 0x80) {
+ pci_read_config_byte(dev, 0x5b, &scr2);
+ if (scr2 & 0x80) {
/* spin looking for the clock to destabilize */
for (i = 0; i < 0x1000; ++i) {
pci_read_config_byte(dev, 0x5b,
- &reg5bh);
- if ((reg5bh & 0x80) == 0)
+ &scr2);
+ if ((scr2 & 0x80) == 0)
goto pll_recal;
}
pci_read_config_dword(dev, 0x5c, &pll);
@@ -1159,26 +1156,24 @@ init_hpt37X_done:
static int __devinit init_hpt37x(struct pci_dev *dev)
{
- u8 reg5ah;
+ u8 scr1;
- pci_read_config_byte(dev, 0x5a, &reg5ah);
+ pci_read_config_byte (dev, 0x5a, &scr1);
/* interrupt force enable */
- pci_write_config_byte(dev, 0x5a, (reg5ah & ~0x10));
+ pci_write_config_byte(dev, 0x5a, (scr1 & ~0x10));
return 0;
}
static int __devinit init_hpt366(struct pci_dev *dev)
{
- u32 reg1 = 0;
- u8 drive_fast = 0;
+ u8 mcr = 0;
/*
* Disable the "fast interrupt" prediction.
*/
- pci_read_config_byte(dev, 0x51, &drive_fast);
- if (drive_fast & 0x80)
- pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
- pci_read_config_dword(dev, 0x40, &reg1);
+ pci_read_config_byte(dev, 0x51, &mcr);
+ if (mcr & 0x80)
+ pci_write_config_byte(dev, 0x51, mcr & ~0x80);
return 0;
}
@@ -1213,17 +1208,21 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = hwif->pci_dev;
struct hpt_info *info = ide_get_hwifdata(hwif);
- u8 ata66 = 0, regmask = (hwif->channel) ? 0x01 : 0x02;
int serialize = HPT_SERIALIZE_IO;
-
+ u8 scr1 = 0, ata66 = (hwif->channel) ? 0x01 : 0x02;
+
+ /* Cache the channel's MISC. control registers' offset */
+ hwif->select_data = hwif->channel ? 0x54 : 0x50;
+
hwif->tuneproc = &hpt3xx_tune_drive;
hwif->speedproc = &hpt3xx_tune_chipset;
hwif->quirkproc = &hpt3xx_quirkproc;
hwif->intrproc = &hpt3xx_intrproc;
hwif->maskproc = &hpt3xx_maskproc;
-
+ hwif->busproc = &hpt3xx_busproc;
+
/*
* HPT3xxN chips have some complications:
*
@@ -1241,7 +1240,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
/*
* The HPT37x uses the CBLID pins as outputs for MA15/MA16
- * address lines to access an external eeprom. To read valid
+ * address lines to access an external EEPROM. To read valid
* cable detect state the pins must be enabled as inputs.
*/
if (info->revision >= 8 && (PCI_FUNC(dev->devfn) & 1)) {
@@ -1250,35 +1249,28 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
* - set bit 15 of reg 0x52 to enable TCBLID as input
* - set bit 15 of reg 0x56 to enable FCBLID as input
*/
- u16 mcr3, mcr6;
- pci_read_config_word(dev, 0x52, &mcr3);
- pci_read_config_word(dev, 0x56, &mcr6);
- pci_write_config_word(dev, 0x52, mcr3 | 0x8000);
- pci_write_config_word(dev, 0x56, mcr6 | 0x8000);
+ u8 mcr_addr = hwif->select_data + 2;
+ u16 mcr;
+
+ pci_read_config_word (dev, mcr_addr, &mcr);
+ pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
/* now read cable id register */
- pci_read_config_byte(dev, 0x5a, &ata66);
- pci_write_config_word(dev, 0x52, mcr3);
- pci_write_config_word(dev, 0x56, mcr6);
+ pci_read_config_byte (dev, 0x5a, &scr1);
+ pci_write_config_word(dev, mcr_addr, mcr);
} else if (info->revision >= 3) {
/*
* HPT370/372 and 374 pcifn 0
- * - clear bit 0 of 0x5b to enable P/SCBLID as inputs
+ * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
*/
- u8 scr2;
- pci_read_config_byte(dev, 0x5b, &scr2);
- pci_write_config_byte(dev, 0x5b, scr2 & ~1);
- /* now read cable id register */
- pci_read_config_byte(dev, 0x5a, &ata66);
- pci_write_config_byte(dev, 0x5b, scr2);
- } else {
- pci_read_config_byte(dev, 0x5a, &ata66);
- }
+ u8 scr2 = 0;
-#ifdef DEBUG
- printk("HPT366: reg5ah=0x%02x ATA-%s Cable Port%d\n",
- ata66, (ata66 & regmask) ? "33" : "66",
- PCI_FUNC(hwif->pci_dev->devfn));
-#endif /* DEBUG */
+ pci_read_config_byte (dev, 0x5b, &scr2);
+ pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
+ /* now read cable id register */
+ pci_read_config_byte (dev, 0x5a, &scr1);
+ pci_write_config_byte(dev, 0x5b, scr2);
+ } else
+ pci_read_config_byte (dev, 0x5a, &scr1);
/* Serialize access to this device */
if (serialize && hwif->mate)
@@ -1300,7 +1292,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
hwif->mwdma_mask = 0x07;
if (!(hwif->udma_four))
- hwif->udma_four = ((ata66 & regmask) ? 0 : 1);
+ hwif->udma_four = ((scr1 & ata66) ? 0 : 1);
hwif->ide_dma_check = &hpt366_config_drive_xfer_rate;
if (info->revision >= 8) {
@@ -1327,11 +1319,10 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
{
- struct hpt_info *info = ide_get_hwifdata(hwif);
- u8 masterdma = 0, slavedma = 0;
- u8 dma_new = 0, dma_old = 0;
- u8 primary = hwif->channel ? 0x4b : 0x43;
- u8 secondary = hwif->channel ? 0x4f : 0x47;
+ struct pci_dev *dev = hwif->pci_dev;
+ struct hpt_info *info = ide_get_hwifdata(hwif);
+ u8 masterdma = 0, slavedma = 0;
+ u8 dma_new = 0, dma_old = 0;
unsigned long flags;
if (!dmabase)
@@ -1348,13 +1339,13 @@ static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
local_irq_save(flags);
dma_new = dma_old;
- pci_read_config_byte(hwif->pci_dev, primary, &masterdma);
- pci_read_config_byte(hwif->pci_dev, secondary, &slavedma);
+ pci_read_config_byte(dev, hwif->channel ? 0x4b : 0x43, &masterdma);
+ pci_read_config_byte(dev, hwif->channel ? 0x4f : 0x47, &slavedma);
if (masterdma & 0x30) dma_new |= 0x20;
- if (slavedma & 0x30) dma_new |= 0x40;
+ if ( slavedma & 0x30) dma_new |= 0x40;
if (dma_new != dma_old)
- hwif->OUTB(dma_new, dmabase+2);
+ hwif->OUTB(dma_new, dmabase + 2);
local_irq_restore(flags);
OpenPOWER on IntegriCloud