ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 514 insertions, 0 deletions

diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
new file mode 100644
index 0000000..2a812d3
--- /dev/null
+++ b/drivers/ide/via82cxxx.c
@@ -0,0 +1,514 @@
+/*
+ * VIA IDE driver for Linux. Supported southbridges:
+ *
+ *   vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
+ *   vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
+ *   vt8235, vt8237, vt8237a
+ *
+ * Copyright (c) 2000-2002 Vojtech Pavlik
+ * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
+ *
+ * Based on the work of:
+ *	Michel Aubry
+ *	Jeff Garzik
+ *	Andre Hedrick
+ *
+ * Documentation:
+ *	Obsolete device documentation publically available from via.com.tw
+ *	Current device documentation available under NDA only
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <linux/dmi.h>
+
+#ifdef CONFIG_PPC_CHRP
+#include <asm/processor.h>
+#endif
+
+#define DRV_NAME "via82cxxx"
+
+#define VIA_IDE_ENABLE		0x40
+#define VIA_IDE_CONFIG		0x41
+#define VIA_FIFO_CONFIG		0x43
+#define VIA_MISC_1		0x44
+#define VIA_MISC_2		0x45
+#define VIA_MISC_3		0x46
+#define VIA_DRIVE_TIMING	0x48
+#define VIA_8BIT_TIMING		0x4e
+#define VIA_ADDRESS_SETUP	0x4c
+#define VIA_UDMA_TIMING		0x50
+
+#define VIA_BAD_PREQ		0x01 /* Crashes if PREQ# till DDACK# set */
+#define VIA_BAD_CLK66		0x02 /* 66 MHz clock doesn't work correctly */
+#define VIA_SET_FIFO		0x04 /* Needs to have FIFO split set */
+#define VIA_NO_UNMASK		0x08 /* Doesn't work with IRQ unmasking on */
+#define VIA_BAD_ID		0x10 /* Has wrong vendor ID (0x1107) */
+#define VIA_BAD_AST		0x20 /* Don't touch Address Setup Timing */
+
+/*
+ * VIA SouthBridge chips.
+ */
+
+static struct via_isa_bridge {
+	char *name;
+	u16 id;
+	u8 rev_min;
+	u8 rev_max;
+	u8 udma_mask;
+	u8 flags;
+} via_isa_bridges[] = {
+	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8237a",	PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8235",	PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8233a",	PCI_DEVICE_ID_VIA_8233A,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8233c",	PCI_DEVICE_ID_VIA_8233C_0,  0x00, 0x2f, ATA_UDMA5, },
+	{ "vt8233",	PCI_DEVICE_ID_VIA_8233_0,   0x00, 0x2f, ATA_UDMA5, },
+	{ "vt8231",	PCI_DEVICE_ID_VIA_8231,     0x00, 0x2f, ATA_UDMA5, },
+	{ "vt82c686b",	PCI_DEVICE_ID_VIA_82C686,   0x40, 0x4f, ATA_UDMA5, },
+	{ "vt82c686a",	PCI_DEVICE_ID_VIA_82C686,   0x10, 0x2f, ATA_UDMA4, },
+	{ "vt82c686",	PCI_DEVICE_ID_VIA_82C686,   0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
+	{ "vt82c596b",	PCI_DEVICE_ID_VIA_82C596,   0x10, 0x2f, ATA_UDMA4, },
+	{ "vt82c596a",	PCI_DEVICE_ID_VIA_82C596,   0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
+	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
+	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
+	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
+	{ "vt82c586a",	PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
+	{ "vt82c586",	PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f,      0x00, VIA_SET_FIFO },
+	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f,      0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
+	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f,      0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+	{ NULL }
+};
+
+static unsigned int via_clock;
+static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
+
+struct via82cxxx_dev
+{
+	struct via_isa_bridge *via_config;
+	unsigned int via_80w;
+};
+
+/**
+ *	via_set_speed			-	write timing registers
+ *	@dev: PCI device
+ *	@dn: device
+ *	@timing: IDE timing data to use
+ *
+ *	via_set_speed writes timing values to the chipset registers
+ */
+
+static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct via82cxxx_dev *vdev = host->host_priv;
+	u8 t;
+
+	if (~vdev->via_config->flags & VIA_BAD_AST) {
+		pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
+		t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
+		pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
+	}
+
+	pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)),
+		((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
+
+	pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
+		((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
+
+	switch (vdev->via_config->udma_mask) {
+	case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
+	case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break;
+	case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
+	case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
+	default: return;
+	}
+
+	pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t);
+}
+
+/**
+ *	via_set_drive		-	configure transfer mode
+ *	@drive: Drive to set up
+ *	@speed: desired speed
+ *
+ *	via_set_drive() computes timing values configures the chipset to
+ *	a desired transfer mode.  It also can be called by upper layers.
+ */
+
+static void via_set_drive(ide_drive_t *drive, const u8 speed)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	ide_drive_t *peer = ide_get_pair_dev(drive);
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct via82cxxx_dev *vdev = host->host_priv;
+	struct ide_timing t, p;
+	unsigned int T, UT;
+
+	T = 1000000000 / via_clock;
+
+	switch (vdev->via_config->udma_mask) {
+	case ATA_UDMA2: UT = T;   break;
+	case ATA_UDMA4: UT = T/2; break;
+	case ATA_UDMA5: UT = T/3; break;
+	case ATA_UDMA6: UT = T/4; break;
+	default:	UT = T;
+	}
+
+	ide_timing_compute(drive, speed, &t, T, UT);
+
+	if (peer) {
+		ide_timing_compute(peer, peer->current_speed, &p, T, UT);
+		ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
+	}
+
+	via_set_speed(HWIF(drive), drive->dn, &t);
+}
+
+/**
+ *	via_set_pio_mode	-	set host controller for PIO mode
+ *	@drive: drive
+ *	@pio: PIO mode number
+ *
+ *	A callback from the upper layers for PIO-only tuning.
+ */
+
+static void via_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	via_set_drive(drive, XFER_PIO_0 + pio);
+}
+
+static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
+{
+	struct via_isa_bridge *via_config;
+
+	for (via_config = via_isa_bridges; via_config->id; via_config++)
+		if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
+			!!(via_config->flags & VIA_BAD_ID),
+			via_config->id, NULL))) {
+
+			if ((*isa)->revision >= via_config->rev_min &&
+			    (*isa)->revision <= via_config->rev_max)
+				break;
+			pci_dev_put(*isa);
+		}
+
+	return via_config;
+}
+
+/*
+ * Check and handle 80-wire cable presence
+ */
+static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
+{
+	int i;
+
+	switch (vdev->via_config->udma_mask) {
+		case ATA_UDMA4:
+			for (i = 24; i >= 0; i -= 8)
+				if (((u >> (i & 16)) & 8) &&
+				    ((u >> i) & 0x20) &&
+				     (((u >> i) & 7) < 2)) {
+					/*
+					 * 2x PCI clock and
+					 * UDMA w/ < 3T/cycle
+					 */
+					vdev->via_80w |= (1 << (1 - (i >> 4)));
+				}
+			break;
+
+		case ATA_UDMA5:
+			for (i = 24; i >= 0; i -= 8)
+				if (((u >> i) & 0x10) ||
+				    (((u >> i) & 0x20) &&
+				     (((u >> i) & 7) < 4))) {
+					/* BIOS 80-wire bit or
+					 * UDMA w/ < 60ns/cycle
+					 */
+					vdev->via_80w |= (1 << (1 - (i >> 4)));
+				}
+			break;
+
+		case ATA_UDMA6:
+			for (i = 24; i >= 0; i -= 8)
+				if (((u >> i) & 0x10) ||
+				    (((u >> i) & 0x20) &&
+				     (((u >> i) & 7) < 6))) {
+					/* BIOS 80-wire bit or
+					 * UDMA w/ < 60ns/cycle
+					 */
+					vdev->via_80w |= (1 << (1 - (i >> 4)));
+				}
+			break;
+	}
+}
+
+/**
+ *	init_chipset_via82cxxx	-	initialization handler
+ *	@dev: PCI device
+ *
+ *	The initialization callback. Here we determine the IDE chip type
+ *	and initialize its drive independent registers.
+ */
+
+static unsigned int init_chipset_via82cxxx(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct via82cxxx_dev *vdev = host->host_priv;
+	struct via_isa_bridge *via_config = vdev->via_config;
+	u8 t, v;
+	u32 u;
+
+	/*
+	 * Detect cable and configure Clk66
+	 */
+	pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+
+	via_cable_detect(vdev, u);
+
+	if (via_config->udma_mask == ATA_UDMA4) {
+		/* Enable Clk66 */
+		pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
+	} else if (via_config->flags & VIA_BAD_CLK66) {
+		/* Would cause trouble on 596a and 686 */
+		pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
+	}
+
+	/*
+	 * Check whether interfaces are enabled.
+	 */
+
+	pci_read_config_byte(dev, VIA_IDE_ENABLE, &v);
+
+	/*
+	 * Set up FIFO sizes and thresholds.
+	 */
+
+	pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t);
+
+	/* Disable PREQ# till DDACK# */
+	if (via_config->flags & VIA_BAD_PREQ) {
+		/* Would crash on 586b rev 41 */
+		t &= 0x7f;
+	}
+
+	/* Fix FIFO split between channels */
+	if (via_config->flags & VIA_SET_FIFO) {
+		t &= (t & 0x9f);
+		switch (v & 3) {
+			case 2: t |= 0x00; break;	/* 16 on primary */
+			case 1: t |= 0x60; break;	/* 16 on secondary */
+			case 3: t |= 0x20; break;	/* 8 pri 8 sec */
+		}
+	}
+
+	pci_write_config_byte(dev, VIA_FIFO_CONFIG, t);
+
+	return 0;
+}
+
+/*
+ *	Cable special cases
+ */
+
+static const struct dmi_system_id cable_dmi_table[] = {
+	{
+		.ident = "Acer Ferrari 3400",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
+			DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
+		},
+	},
+	{ }
+};
+
+static int via_cable_override(struct pci_dev *pdev)
+{
+	/* Systems by DMI */
+	if (dmi_check_system(cable_dmi_table))
+		return 1;
+
+	/* Arima W730-K8/Targa Visionary 811/... */
+	if (pdev->subsystem_vendor == 0x161F &&
+	    pdev->subsystem_device == 0x2032)
+		return 1;
+
+	return 0;
+}
+
+static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
+{
+	struct pci_dev *pdev = to_pci_dev(hwif->dev);
+	struct ide_host *host = pci_get_drvdata(pdev);
+	struct via82cxxx_dev *vdev = host->host_priv;
+
+	if (via_cable_override(pdev))
+		return ATA_CBL_PATA40_SHORT;
+
+	if ((vdev->via_80w >> hwif->channel) & 1)
+		return ATA_CBL_PATA80;
+	else
+		return ATA_CBL_PATA40;
+}
+
+static const struct ide_port_ops via_port_ops = {
+	.set_pio_mode		= via_set_pio_mode,
+	.set_dma_mode		= via_set_drive,
+	.cable_detect		= via82cxxx_cable_detect,
+};
+
+static const struct ide_port_info via82cxxx_chipset __devinitdata = {
+	.name		= DRV_NAME,
+	.init_chipset	= init_chipset_via82cxxx,
+	.enablebits	= { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
+	.port_ops	= &via_port_ops,
+	.host_flags	= IDE_HFLAG_PIO_NO_BLACKLIST |
+			  IDE_HFLAG_POST_SET_MODE |
+			  IDE_HFLAG_IO_32BIT,
+	.pio_mask	= ATA_PIO5,
+	.swdma_mask	= ATA_SWDMA2,
+	.mwdma_mask	= ATA_MWDMA2,
+};
+
+static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct pci_dev *isa = NULL;
+	struct via_isa_bridge *via_config;
+	struct via82cxxx_dev *vdev;
+	int rc;
+	u8 idx = id->driver_data;
+	struct ide_port_info d;
+
+	d = via82cxxx_chipset;
+
+	/*
+	 * Find the ISA bridge and check we know what it is.
+	 */
+	via_config = via_config_find(&isa);
+	if (!via_config->id) {
+		printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n",
+			pci_name(dev));
+		return -ENODEV;
+	}
+
+	/*
+	 * Print the boot message.
+	 */
+	printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n",
+		pci_name(dev), via_config->name, isa->revision,
+		via_config->udma_mask ? "U" : "MW",
+		via_dma[via_config->udma_mask ?
+			(fls(via_config->udma_mask) - 1) : 0]);
+
+	pci_dev_put(isa);
+
+	/*
+	 * Determine system bus clock.
+	 */
+	via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
+
+	switch (via_clock) {
+	case 33000: via_clock = 33333; break;
+	case 37000: via_clock = 37500; break;
+	case 41000: via_clock = 41666; break;
+	}
+
+	if (via_clock < 20000 || via_clock > 50000) {
+		printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
+			"impossible (%d), using 33 MHz instead.\n", via_clock);
+		printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want "
+			"to assume 80-wire cable.\n");
+		via_clock = 33333;
+	}
+
+	if (idx == 0)
+		d.host_flags |= IDE_HFLAG_NO_AUTODMA;
+	else
+		d.enablebits[1].reg = d.enablebits[0].reg = 0;
+
+	if ((via_config->flags & VIA_NO_UNMASK) == 0)
+		d.host_flags |= IDE_HFLAG_UNMASK_IRQS;
+
+#ifdef CONFIG_PPC_CHRP
+	if (machine_is(chrp) && _chrp_type == _CHRP_Pegasos)
+		d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
+#endif
+
+	d.udma_mask = via_config->udma_mask;
+
+	vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
+	if (!vdev) {
+		printk(KERN_ERR DRV_NAME " %s: out of memory :(\n",
+			pci_name(dev));
+		return -ENOMEM;
+	}
+
+	vdev->via_config = via_config;
+
+	rc = ide_pci_init_one(dev, &d, vdev);
+	if (rc)
+		kfree(vdev);
+
+	return rc;
+}
+
+static void __devexit via_remove(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct via82cxxx_dev *vdev = host->host_priv;
+
+	ide_pci_remove(dev);
+	kfree(vdev);
+}
+
+static const struct pci_device_id via_pci_tbl[] = {
+	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1),  0 },
+	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1),  0 },
+	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
+	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410),      1 },
+	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, via_pci_tbl);
+
+static struct pci_driver via_pci_driver = {
+	.name 		= "VIA_IDE",
+	.id_table 	= via_pci_tbl,
+	.probe 		= via_init_one,
+	.remove		= __devexit_p(via_remove),
+	.suspend	= ide_pci_suspend,
+	.resume		= ide_pci_resume,
+};
+
+static int __init via_ide_init(void)
+{
+	return ide_pci_register_driver(&via_pci_driver);
+}
+
+static void __exit via_ide_exit(void)
+{
+	pci_unregister_driver(&via_pci_driver);
+}
+
+module_init(via_ide_init);
+module_exit(via_ide_exit);
+
+MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick");
+MODULE_DESCRIPTION("PCI driver module for VIA IDE");
+MODULE_LICENSE("GPL");