ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 966 insertions, 0 deletions

diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c
new file mode 100644
index 0000000..49f163a
--- /dev/null
+++ b/drivers/ide/scc_pata.c
@@ -0,0 +1,966 @@
+/*
+ * Support for IDE interfaces on Celleb platform
+ *
+ * (C) Copyright 2006 TOSHIBA CORPORATION
+ *
+ * This code is based on drivers/ide/pci/siimage.c:
+ * Copyright (C) 2001-2002	Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2003		Red Hat <alan@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA            0x01b4
+
+#define SCC_PATA_NAME           "scc IDE"
+
+#define TDVHSEL_MASTER          0x00000001
+#define TDVHSEL_SLAVE           0x00000004
+
+#define MODE_JCUSFEN            0x00000080
+
+#define CCKCTRL_ATARESET        0x00040000
+#define CCKCTRL_BUFCNT          0x00020000
+#define CCKCTRL_CRST            0x00010000
+#define CCKCTRL_OCLKEN          0x00000100
+#define CCKCTRL_ATACLKOEN       0x00000002
+#define CCKCTRL_LCLKEN          0x00000001
+
+#define QCHCD_IOS_SS		0x00000001
+
+#define QCHSD_STPDIAG		0x00020000
+
+#define INTMASK_MSK             0xD1000012
+#define INTSTS_SERROR		0x80000000
+#define INTSTS_PRERR		0x40000000
+#define INTSTS_RERR		0x10000000
+#define INTSTS_ICERR		0x01000000
+#define INTSTS_BMSINT		0x00000010
+#define INTSTS_BMHE		0x00000008
+#define INTSTS_IOIRQS           0x00000004
+#define INTSTS_INTRQ            0x00000002
+#define INTSTS_ACTEINT          0x00000001
+
+#define ECMODE_VALUE 0x01
+
+static struct scc_ports {
+	unsigned long ctl, dma;
+	struct ide_host *host;	/* for removing port from system */
+} scc_ports[MAX_HWIFS];
+
+/* PIO transfer mode  table */
+/* JCHST */
+static unsigned long JCHSTtbl[2][7] = {
+	{0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00},   /* 100MHz */
+	{0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00}    /* 133MHz */
+};
+
+/* JCHHT */
+static unsigned long JCHHTtbl[2][7] = {
+	{0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00},   /* 100MHz */
+	{0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00}    /* 133MHz */
+};
+
+/* JCHCT */
+static unsigned long JCHCTtbl[2][7] = {
+	{0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00},   /* 100MHz */
+	{0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00}    /* 133MHz */
+};
+
+
+/* DMA transfer mode  table */
+/* JCHDCTM/JCHDCTS */
+static unsigned long JCHDCTxtbl[2][7] = {
+	{0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00},   /* 100MHz */
+	{0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00}    /* 133MHz */
+};
+
+/* JCSTWTM/JCSTWTS  */
+static unsigned long JCSTWTxtbl[2][7] = {
+	{0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00},   /* 100MHz */
+	{0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02}    /* 133MHz */
+};
+
+/* JCTSS */
+static unsigned long JCTSStbl[2][7] = {
+	{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00},   /* 100MHz */
+	{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05}    /* 133MHz */
+};
+
+/* JCENVT */
+static unsigned long JCENVTtbl[2][7] = {
+	{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00},   /* 100MHz */
+	{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02}    /* 133MHz */
+};
+
+/* JCACTSELS/JCACTSELM */
+static unsigned long JCACTSELtbl[2][7] = {
+	{0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00},   /* 100MHz */
+	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01}    /* 133MHz */
+};
+
+
+static u8 scc_ide_inb(unsigned long port)
+{
+	u32 data = in_be32((void*)port);
+	return (u8)data;
+}
+
+static void scc_exec_command(ide_hwif_t *hwif, u8 cmd)
+{
+	out_be32((void *)hwif->io_ports.command_addr, cmd);
+	eieio();
+	in_be32((void *)(hwif->dma_base + 0x01c));
+	eieio();
+}
+
+static u8 scc_read_status(ide_hwif_t *hwif)
+{
+	return (u8)in_be32((void *)hwif->io_ports.status_addr);
+}
+
+static u8 scc_read_altstatus(ide_hwif_t *hwif)
+{
+	return (u8)in_be32((void *)hwif->io_ports.ctl_addr);
+}
+
+static u8 scc_read_sff_dma_status(ide_hwif_t *hwif)
+{
+	return (u8)in_be32((void *)(hwif->dma_base + 4));
+}
+
+static void scc_set_irq(ide_hwif_t *hwif, int on)
+{
+	u8 ctl = ATA_DEVCTL_OBS;
+
+	if (on == 4) { /* hack for SRST */
+		ctl |= 4;
+		on &= ~4;
+	}
+
+	ctl |= on ? 0 : 2;
+
+	out_be32((void *)hwif->io_ports.ctl_addr, ctl);
+	eieio();
+	in_be32((void *)(hwif->dma_base + 0x01c));
+	eieio();
+}
+
+static void scc_ide_insw(unsigned long port, void *addr, u32 count)
+{
+	u16 *ptr = (u16 *)addr;
+	while (count--) {
+		*ptr++ = le16_to_cpu(in_be32((void*)port));
+	}
+}
+
+static void scc_ide_insl(unsigned long port, void *addr, u32 count)
+{
+	u16 *ptr = (u16 *)addr;
+	while (count--) {
+		*ptr++ = le16_to_cpu(in_be32((void*)port));
+		*ptr++ = le16_to_cpu(in_be32((void*)port));
+	}
+}
+
+static void scc_ide_outb(u8 addr, unsigned long port)
+{
+	out_be32((void*)port, addr);
+}
+
+static void
+scc_ide_outsw(unsigned long port, void *addr, u32 count)
+{
+	u16 *ptr = (u16 *)addr;
+	while (count--) {
+		out_be32((void*)port, cpu_to_le16(*ptr++));
+	}
+}
+
+static void
+scc_ide_outsl(unsigned long port, void *addr, u32 count)
+{
+	u16 *ptr = (u16 *)addr;
+	while (count--) {
+		out_be32((void*)port, cpu_to_le16(*ptr++));
+		out_be32((void*)port, cpu_to_le16(*ptr++));
+	}
+}
+
+/**
+ *	scc_set_pio_mode	-	set host controller for PIO mode
+ *	@drive: drive
+ *	@pio: PIO mode number
+ *
+ *	Load the timing settings for this device mode into the
+ *	controller.
+ */
+
+static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct scc_ports *ports = ide_get_hwifdata(hwif);
+	unsigned long ctl_base = ports->ctl;
+	unsigned long cckctrl_port = ctl_base + 0xff0;
+	unsigned long piosht_port = ctl_base + 0x000;
+	unsigned long pioct_port = ctl_base + 0x004;
+	unsigned long reg;
+	int offset;
+
+	reg = in_be32((void __iomem *)cckctrl_port);
+	if (reg & CCKCTRL_ATACLKOEN) {
+		offset = 1; /* 133MHz */
+	} else {
+		offset = 0; /* 100MHz */
+	}
+	reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
+	out_be32((void __iomem *)piosht_port, reg);
+	reg = JCHCTtbl[offset][pio];
+	out_be32((void __iomem *)pioct_port, reg);
+}
+
+/**
+ *	scc_set_dma_mode	-	set host controller for DMA mode
+ *	@drive: drive
+ *	@speed: DMA mode
+ *
+ *	Load the timing settings for this device mode into the
+ *	controller.
+ */
+
+static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct scc_ports *ports = ide_get_hwifdata(hwif);
+	unsigned long ctl_base = ports->ctl;
+	unsigned long cckctrl_port = ctl_base + 0xff0;
+	unsigned long mdmact_port = ctl_base + 0x008;
+	unsigned long mcrcst_port = ctl_base + 0x00c;
+	unsigned long sdmact_port = ctl_base + 0x010;
+	unsigned long scrcst_port = ctl_base + 0x014;
+	unsigned long udenvt_port = ctl_base + 0x018;
+	unsigned long tdvhsel_port   = ctl_base + 0x020;
+	int is_slave = (&hwif->drives[1] == drive);
+	int offset, idx;
+	unsigned long reg;
+	unsigned long jcactsel;
+
+	reg = in_be32((void __iomem *)cckctrl_port);
+	if (reg & CCKCTRL_ATACLKOEN) {
+		offset = 1; /* 133MHz */
+	} else {
+		offset = 0; /* 100MHz */
+	}
+
+	idx = speed - XFER_UDMA_0;
+
+	jcactsel = JCACTSELtbl[offset][idx];
+	if (is_slave) {
+		out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
+		out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
+		jcactsel = jcactsel << 2;
+		out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
+	} else {
+		out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
+		out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
+		out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
+	}
+	reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
+	out_be32((void __iomem *)udenvt_port, reg);
+}
+
+static void scc_dma_host_set(ide_drive_t *drive, int on)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u8 unit = drive->dn & 1;
+	u8 dma_stat = scc_ide_inb(hwif->dma_base + 4);
+
+	if (on)
+		dma_stat |= (1 << (5 + unit));
+	else
+		dma_stat &= ~(1 << (5 + unit));
+
+	scc_ide_outb(dma_stat, hwif->dma_base + 4);
+}
+
+/**
+ *	scc_ide_dma_setup	-	begin a DMA phase
+ *	@drive: target device
+ *
+ *	Build an IDE DMA PRD (IDE speak for scatter gather table)
+ *	and then set up the DMA transfer registers.
+ *
+ *	Returns 0 on success. If a PIO fallback is required then 1
+ *	is returned.
+ */
+
+static int scc_dma_setup(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct request *rq = HWGROUP(drive)->rq;
+	unsigned int reading;
+	u8 dma_stat;
+
+	if (rq_data_dir(rq))
+		reading = 0;
+	else
+		reading = 1 << 3;
+
+	/* fall back to pio! */
+	if (!ide_build_dmatable(drive, rq)) {
+		ide_map_sg(drive, rq);
+		return 1;
+	}
+
+	/* PRD table */
+	out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);
+
+	/* specify r/w */
+	out_be32((void __iomem *)hwif->dma_base, reading);
+
+	/* read DMA status for INTR & ERROR flags */
+	dma_stat = in_be32((void __iomem *)(hwif->dma_base + 4));
+
+	/* clear INTR & ERROR flags */
+	out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6);
+	drive->waiting_for_dma = 1;
+	return 0;
+}
+
+static void scc_dma_start(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u8 dma_cmd = scc_ide_inb(hwif->dma_base);
+
+	/* start DMA */
+	scc_ide_outb(dma_cmd | 1, hwif->dma_base);
+	wmb();
+}
+
+static int __scc_dma_end(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u8 dma_stat, dma_cmd;
+
+	drive->waiting_for_dma = 0;
+	/* get DMA command mode */
+	dma_cmd = scc_ide_inb(hwif->dma_base);
+	/* stop DMA */
+	scc_ide_outb(dma_cmd & ~1, hwif->dma_base);
+	/* get DMA status */
+	dma_stat = scc_ide_inb(hwif->dma_base + 4);
+	/* clear the INTR & ERROR bits */
+	scc_ide_outb(dma_stat | 6, hwif->dma_base + 4);
+	/* purge DMA mappings */
+	ide_destroy_dmatable(drive);
+	/* verify good DMA status */
+	wmb();
+	return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
+}
+
+/**
+ *	scc_dma_end	-	Stop DMA
+ *	@drive: IDE drive
+ *
+ *	Check and clear INT Status register.
+ *	Then call __scc_dma_end().
+ */
+
+static int scc_dma_end(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	void __iomem *dma_base = (void __iomem *)hwif->dma_base;
+	unsigned long intsts_port = hwif->dma_base + 0x014;
+	u32 reg;
+	int dma_stat, data_loss = 0;
+	static int retry = 0;
+
+	/* errata A308 workaround: Step5 (check data loss) */
+	/* We don't check non ide_disk because it is limited to UDMA4 */
+	if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr)
+	      & ATA_ERR) &&
+	    drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
+		reg = in_be32((void __iomem *)intsts_port);
+		if (!(reg & INTSTS_ACTEINT)) {
+			printk(KERN_WARNING "%s: operation failed (transfer data loss)\n",
+			       drive->name);
+			data_loss = 1;
+			if (retry++) {
+				struct request *rq = HWGROUP(drive)->rq;
+				int unit;
+				/* ERROR_RESET and drive->crc_count are needed
+				 * to reduce DMA transfer mode in retry process.
+				 */
+				if (rq)
+					rq->errors |= ERROR_RESET;
+				for (unit = 0; unit < MAX_DRIVES; unit++) {
+					ide_drive_t *drive = &hwif->drives[unit];
+					drive->crc_count++;
+				}
+			}
+		}
+	}
+
+	while (1) {
+		reg = in_be32((void __iomem *)intsts_port);
+
+		if (reg & INTSTS_SERROR) {
+			printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
+			out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
+
+			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
+			continue;
+		}
+
+		if (reg & INTSTS_PRERR) {
+			u32 maea0, maec0;
+			unsigned long ctl_base = hwif->config_data;
+
+			maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
+			maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
+
+			printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
+
+			out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
+
+			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
+			continue;
+		}
+
+		if (reg & INTSTS_RERR) {
+			printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
+			out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
+
+			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
+			continue;
+		}
+
+		if (reg & INTSTS_ICERR) {
+			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
+
+			printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
+			out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
+			continue;
+		}
+
+		if (reg & INTSTS_BMSINT) {
+			printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
+			out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
+
+			ide_do_reset(drive);
+			continue;
+		}
+
+		if (reg & INTSTS_BMHE) {
+			out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
+			continue;
+		}
+
+		if (reg & INTSTS_ACTEINT) {
+			out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
+			continue;
+		}
+
+		if (reg & INTSTS_IOIRQS) {
+			out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
+			continue;
+		}
+		break;
+	}
+
+	dma_stat = __scc_dma_end(drive);
+	if (data_loss)
+		dma_stat |= 2; /* emulate DMA error (to retry command) */
+	return dma_stat;
+}
+
+/* returns 1 if dma irq issued, 0 otherwise */
+static int scc_dma_test_irq(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014);
+
+	/* SCC errata A252,A308 workaround: Step4 */
+	if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr)
+	     & ATA_ERR) &&
+	    (int_stat & INTSTS_INTRQ))
+		return 1;
+
+	/* SCC errata A308 workaround: Step5 (polling IOIRQS) */
+	if (int_stat & INTSTS_IOIRQS)
+		return 1;
+
+	return 0;
+}
+
+static u8 scc_udma_filter(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u8 mask = hwif->ultra_mask;
+
+	/* errata A308 workaround: limit non ide_disk drive to UDMA4 */
+	if ((drive->media != ide_disk) && (mask & 0xE0)) {
+		printk(KERN_INFO "%s: limit %s to UDMA4\n",
+		       SCC_PATA_NAME, drive->name);
+		mask = ATA_UDMA4;
+	}
+
+	return mask;
+}
+
+/**
+ *	setup_mmio_scc	-	map CTRL/BMID region
+ *	@dev: PCI device we are configuring
+ *	@name: device name
+ *
+ */
+
+static int setup_mmio_scc (struct pci_dev *dev, const char *name)
+{
+	unsigned long ctl_base = pci_resource_start(dev, 0);
+	unsigned long dma_base = pci_resource_start(dev, 1);
+	unsigned long ctl_size = pci_resource_len(dev, 0);
+	unsigned long dma_size = pci_resource_len(dev, 1);
+	void __iomem *ctl_addr;
+	void __iomem *dma_addr;
+	int i, ret;
+
+	for (i = 0; i < MAX_HWIFS; i++) {
+		if (scc_ports[i].ctl == 0)
+			break;
+	}
+	if (i >= MAX_HWIFS)
+		return -ENOMEM;
+
+	ret = pci_request_selected_regions(dev, (1 << 2) - 1, name);
+	if (ret < 0) {
+		printk(KERN_ERR "%s: can't reserve resources\n", name);
+		return ret;
+	}
+
+	if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL)
+		goto fail_0;
+
+	if ((dma_addr = ioremap(dma_base, dma_size)) == NULL)
+		goto fail_1;
+
+	pci_set_master(dev);
+	scc_ports[i].ctl = (unsigned long)ctl_addr;
+	scc_ports[i].dma = (unsigned long)dma_addr;
+	pci_set_drvdata(dev, (void *) &scc_ports[i]);
+
+	return 1;
+
+ fail_1:
+	iounmap(ctl_addr);
+ fail_0:
+	return -ENOMEM;
+}
+
+static int scc_ide_setup_pci_device(struct pci_dev *dev,
+				    const struct ide_port_info *d)
+{
+	struct scc_ports *ports = pci_get_drvdata(dev);
+	struct ide_host *host;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	int i, rc;
+
+	memset(&hw, 0, sizeof(hw));
+	for (i = 0; i <= 8; i++)
+		hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
+	hw.irq = dev->irq;
+	hw.dev = &dev->dev;
+	hw.chipset = ide_pci;
+
+	rc = ide_host_add(d, hws, &host);
+	if (rc)
+		return rc;
+
+	ports->host = host;
+
+	return 0;
+}
+
+/**
+ *	init_setup_scc	-	set up an SCC PATA Controller
+ *	@dev: PCI device
+ *	@d: IDE port info
+ *
+ *	Perform the initial set up for this device.
+ */
+
+static int __devinit init_setup_scc(struct pci_dev *dev,
+				    const struct ide_port_info *d)
+{
+	unsigned long ctl_base;
+	unsigned long dma_base;
+	unsigned long cckctrl_port;
+	unsigned long intmask_port;
+	unsigned long mode_port;
+	unsigned long ecmode_port;
+	u32 reg = 0;
+	struct scc_ports *ports;
+	int rc;
+
+	rc = pci_enable_device(dev);
+	if (rc)
+		goto end;
+
+	rc = setup_mmio_scc(dev, d->name);
+	if (rc < 0)
+		goto end;
+
+	ports = pci_get_drvdata(dev);
+	ctl_base = ports->ctl;
+	dma_base = ports->dma;
+	cckctrl_port = ctl_base + 0xff0;
+	intmask_port = dma_base + 0x010;
+	mode_port = ctl_base + 0x024;
+	ecmode_port = ctl_base + 0xf00;
+
+	/* controller initialization */
+	reg = 0;
+	out_be32((void*)cckctrl_port, reg);
+	reg |= CCKCTRL_ATACLKOEN;
+	out_be32((void*)cckctrl_port, reg);
+	reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
+	out_be32((void*)cckctrl_port, reg);
+	reg |= CCKCTRL_CRST;
+	out_be32((void*)cckctrl_port, reg);
+
+	for (;;) {
+		reg = in_be32((void*)cckctrl_port);
+		if (reg & CCKCTRL_CRST)
+			break;
+		udelay(5000);
+	}
+
+	reg |= CCKCTRL_ATARESET;
+	out_be32((void*)cckctrl_port, reg);
+
+	out_be32((void*)ecmode_port, ECMODE_VALUE);
+	out_be32((void*)mode_port, MODE_JCUSFEN);
+	out_be32((void*)intmask_port, INTMASK_MSK);
+
+	rc = scc_ide_setup_pci_device(dev, d);
+
+ end:
+	return rc;
+}
+
+static void scc_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+	struct ide_io_ports *io_ports = &drive->hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+	u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+
+	if (task->tf_flags & IDE_TFLAG_FLAGGED)
+		HIHI = 0xFF;
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DATA)
+		out_be32((void *)io_ports->data_addr,
+			 (tf->hob_data << 8) | tf->data);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+		scc_ide_outb(tf->hob_feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+		scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+		scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+		scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+		scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+		scc_ide_outb(tf->feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+		scc_ide_outb(tf->nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+		scc_ide_outb(tf->lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+		scc_ide_outb(tf->lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+		scc_ide_outb(tf->lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+		scc_ide_outb((tf->device & HIHI) | drive->select,
+			     io_ports->device_addr);
+}
+
+static void scc_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+	struct ide_io_ports *io_ports = &drive->hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+
+	if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+		u16 data = (u16)in_be32((void *)io_ports->data_addr);
+
+		tf->data = data & 0xff;
+		tf->hob_data = (data >> 8) & 0xff;
+	}
+
+	/* be sure we're looking at the low order bits */
+	scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+
+	if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+		tf->feature = scc_ide_inb(io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+		tf->nsect  = scc_ide_inb(io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+		tf->lbal   = scc_ide_inb(io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+		tf->lbam   = scc_ide_inb(io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+		tf->lbah   = scc_ide_inb(io_ports->lbah_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+		tf->device = scc_ide_inb(io_ports->device_addr);
+
+	if (task->tf_flags & IDE_TFLAG_LBA48) {
+		scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
+
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+			tf->hob_feature = scc_ide_inb(io_ports->feature_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+			tf->hob_nsect   = scc_ide_inb(io_ports->nsect_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+			tf->hob_lbal    = scc_ide_inb(io_ports->lbal_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+			tf->hob_lbam    = scc_ide_inb(io_ports->lbam_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+			tf->hob_lbah    = scc_ide_inb(io_ports->lbah_addr);
+	}
+}
+
+static void scc_input_data(ide_drive_t *drive, struct request *rq,
+			   void *buf, unsigned int len)
+{
+	unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+	len++;
+
+	if (drive->io_32bit) {
+		scc_ide_insl(data_addr, buf, len / 4);
+
+		if ((len & 3) >= 2)
+			scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1);
+	} else
+		scc_ide_insw(data_addr, buf, len / 2);
+}
+
+static void scc_output_data(ide_drive_t *drive,  struct request *rq,
+			    void *buf, unsigned int len)
+{
+	unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+	len++;
+
+	if (drive->io_32bit) {
+		scc_ide_outsl(data_addr, buf, len / 4);
+
+		if ((len & 3) >= 2)
+			scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1);
+	} else
+		scc_ide_outsw(data_addr, buf, len / 2);
+}
+
+/**
+ *	init_mmio_iops_scc	-	set up the iops for MMIO
+ *	@hwif: interface to set up
+ *
+ */
+
+static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	struct scc_ports *ports = pci_get_drvdata(dev);
+	unsigned long dma_base = ports->dma;
+
+	ide_set_hwifdata(hwif, ports);
+
+	hwif->dma_base = dma_base;
+	hwif->config_data = ports->ctl;
+}
+
+/**
+ *	init_iops_scc	-	set up iops
+ *	@hwif: interface to set up
+ *
+ *	Do the basic setup for the SCC hardware interface
+ *	and then do the MMIO setup.
+ */
+
+static void __devinit init_iops_scc(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+
+	hwif->hwif_data = NULL;
+	if (pci_get_drvdata(dev) == NULL)
+		return;
+	init_mmio_iops_scc(hwif);
+}
+
+static int __devinit scc_init_dma(ide_hwif_t *hwif,
+				  const struct ide_port_info *d)
+{
+	return ide_allocate_dma_engine(hwif);
+}
+
+static u8 scc_cable_detect(ide_hwif_t *hwif)
+{
+	return ATA_CBL_PATA80;
+}
+
+/**
+ *	init_hwif_scc	-	set up hwif
+ *	@hwif: interface to set up
+ *
+ *	We do the basic set up of the interface structure. The SCC
+ *	requires several custom handlers so we override the default
+ *	ide DMA handlers appropriately.
+ */
+
+static void __devinit init_hwif_scc(ide_hwif_t *hwif)
+{
+	/* PTERADD */
+	out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
+
+	if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN)
+		hwif->ultra_mask = ATA_UDMA6; /* 133MHz */
+	else
+		hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
+}
+
+static const struct ide_tp_ops scc_tp_ops = {
+	.exec_command		= scc_exec_command,
+	.read_status		= scc_read_status,
+	.read_altstatus		= scc_read_altstatus,
+	.read_sff_dma_status	= scc_read_sff_dma_status,
+
+	.set_irq		= scc_set_irq,
+
+	.tf_load		= scc_tf_load,
+	.tf_read		= scc_tf_read,
+
+	.input_data		= scc_input_data,
+	.output_data		= scc_output_data,
+};
+
+static const struct ide_port_ops scc_port_ops = {
+	.set_pio_mode		= scc_set_pio_mode,
+	.set_dma_mode		= scc_set_dma_mode,
+	.udma_filter		= scc_udma_filter,
+	.cable_detect		= scc_cable_detect,
+};
+
+static const struct ide_dma_ops scc_dma_ops = {
+	.dma_host_set		= scc_dma_host_set,
+	.dma_setup		= scc_dma_setup,
+	.dma_exec_cmd		= ide_dma_exec_cmd,
+	.dma_start		= scc_dma_start,
+	.dma_end		= scc_dma_end,
+	.dma_test_irq		= scc_dma_test_irq,
+	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timeout		= ide_dma_timeout,
+};
+
+#define DECLARE_SCC_DEV(name_str)			\
+  {							\
+      .name		= name_str,			\
+      .init_iops	= init_iops_scc,		\
+      .init_dma		= scc_init_dma,			\
+      .init_hwif	= init_hwif_scc,		\
+      .tp_ops		= &scc_tp_ops,		\
+      .port_ops		= &scc_port_ops,		\
+      .dma_ops		= &scc_dma_ops,			\
+      .host_flags	= IDE_HFLAG_SINGLE,		\
+      .pio_mask		= ATA_PIO4,			\
+  }
+
+static const struct ide_port_info scc_chipsets[] __devinitdata = {
+	/* 0 */ DECLARE_SCC_DEV("sccIDE"),
+};
+
+/**
+ *	scc_init_one	-	pci layer discovery entry
+ *	@dev: PCI device
+ *	@id: ident table entry
+ *
+ *	Called by the PCI code when it finds an SCC PATA controller.
+ *	We then use the IDE PCI generic helper to do most of the work.
+ */
+
+static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	return init_setup_scc(dev, &scc_chipsets[id->driver_data]);
+}
+
+/**
+ *	scc_remove	-	pci layer remove entry
+ *	@dev: PCI device
+ *
+ *	Called by the PCI code when it removes an SCC PATA controller.
+ */
+
+static void __devexit scc_remove(struct pci_dev *dev)
+{
+	struct scc_ports *ports = pci_get_drvdata(dev);
+	struct ide_host *host = ports->host;
+
+	ide_host_remove(host);
+
+	iounmap((void*)ports->dma);
+	iounmap((void*)ports->ctl);
+	pci_release_selected_regions(dev, (1 << 2) - 1);
+	memset(ports, 0, sizeof(*ports));
+}
+
+static const struct pci_device_id scc_pci_tbl[] = {
+	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
+
+static struct pci_driver scc_pci_driver = {
+	.name = "SCC IDE",
+	.id_table = scc_pci_tbl,
+	.probe = scc_init_one,
+	.remove = __devexit_p(scc_remove),
+};
+
+static int scc_ide_init(void)
+{
+	return ide_pci_register_driver(&scc_pci_driver);
+}
+
+module_init(scc_ide_init);
+/* -- No exit code?
+static void scc_ide_exit(void)
+{
+	ide_pci_unregister_driver(&scc_pci_driver);
+}
+module_exit(scc_ide_exit);
+ */
+
+
+MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
+MODULE_LICENSE("GPL");