summaryrefslogtreecommitdiffstats
path: root/drivers/ide/ppc
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/ide/ppc
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/ide/ppc')
-rw-r--r--drivers/ide/ppc/mpc8xx.c855
-rw-r--r--drivers/ide/ppc/pmac.c2208
2 files changed, 3063 insertions, 0 deletions
diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
new file mode 100644
index 0000000..b80c613
--- /dev/null
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -0,0 +1,855 @@
+/*
+ * linux/drivers/ide/ppc/ide-m8xx.c
+ *
+ * Copyright (C) 2000, 2001 Wolfgang Denk, wd@denx.de
+ * Modified for direct IDE interface
+ * by Thomas Lange, thomas@corelatus.com
+ * Modified for direct IDE interface on 8xx without using the PCMCIA
+ * controller
+ * by Steven.Scholz@imc-berlin.de
+ * Moved out of arch/ppc/kernel/m8xx_setup.c, other minor cleanups
+ * by Mathew Locke <mattl@mvista.com>
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/major.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/ide.h>
+#include <linux/bootmem.h>
+
+#include <asm/mpc8xx.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/residual.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/ide.h>
+#include <asm/8xx_immap.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+
+static int identify (volatile u8 *p);
+static void print_fixed (volatile u8 *p);
+static void print_funcid (int func);
+static int check_ide_device (unsigned long base);
+
+static void ide_interrupt_ack (void *dev);
+static void m8xx_ide_tuneproc(ide_drive_t *drive, u8 pio);
+
+typedef struct ide_ioport_desc {
+ unsigned long base_off; /* Offset to PCMCIA memory */
+ unsigned long reg_off[IDE_NR_PORTS]; /* controller register offsets */
+ int irq; /* IRQ */
+} ide_ioport_desc_t;
+
+ide_ioport_desc_t ioport_dsc[MAX_HWIFS] = {
+#ifdef IDE0_BASE_OFFSET
+ { IDE0_BASE_OFFSET,
+ {
+ IDE0_DATA_REG_OFFSET,
+ IDE0_ERROR_REG_OFFSET,
+ IDE0_NSECTOR_REG_OFFSET,
+ IDE0_SECTOR_REG_OFFSET,
+ IDE0_LCYL_REG_OFFSET,
+ IDE0_HCYL_REG_OFFSET,
+ IDE0_SELECT_REG_OFFSET,
+ IDE0_STATUS_REG_OFFSET,
+ IDE0_CONTROL_REG_OFFSET,
+ IDE0_IRQ_REG_OFFSET,
+ },
+ IDE0_INTERRUPT,
+ },
+#ifdef IDE1_BASE_OFFSET
+ { IDE1_BASE_OFFSET,
+ {
+ IDE1_DATA_REG_OFFSET,
+ IDE1_ERROR_REG_OFFSET,
+ IDE1_NSECTOR_REG_OFFSET,
+ IDE1_SECTOR_REG_OFFSET,
+ IDE1_LCYL_REG_OFFSET,
+ IDE1_HCYL_REG_OFFSET,
+ IDE1_SELECT_REG_OFFSET,
+ IDE1_STATUS_REG_OFFSET,
+ IDE1_CONTROL_REG_OFFSET,
+ IDE1_IRQ_REG_OFFSET,
+ },
+ IDE1_INTERRUPT,
+ },
+#endif /* IDE1_BASE_OFFSET */
+#endif /* IDE0_BASE_OFFSET */
+};
+
+ide_pio_timings_t ide_pio_clocks[6];
+int hold_time[6] = {30, 20, 15, 10, 10, 10 }; /* PIO Mode 5 with IORDY (nonstandard) */
+
+/*
+ * Warning: only 1 (ONE) PCMCIA slot supported here,
+ * which must be correctly initialized by the firmware (PPCBoot).
+ */
+static int _slot_ = -1; /* will be read from PCMCIA registers */
+
+/* Make clock cycles and always round up */
+#define PCMCIA_MK_CLKS( t, T ) (( (t) * ((T)/1000000) + 999U ) / 1000U )
+
+
+
+/*
+ * IDE stuff.
+ */
+static int
+m8xx_ide_default_irq(unsigned long base)
+{
+#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
+ if (base >= MAX_HWIFS)
+ return 0;
+
+ printk("[%d] m8xx_ide_default_irq %d\n",__LINE__,ioport_dsc[base].irq);
+
+ return (ioport_dsc[base].irq);
+#else
+ return 9;
+#endif
+}
+
+static unsigned long
+m8xx_ide_default_io_base(int index)
+{
+ return index;
+}
+
+#define M8XX_PCMCIA_CD2(slot) (0x10000000 >> (slot << 4))
+#define M8XX_PCMCIA_CD1(slot) (0x08000000 >> (slot << 4))
+
+/*
+ * The TQM850L hardware has two pins swapped! Grrrrgh!
+ */
+#ifdef CONFIG_TQM850L
+#define __MY_PCMCIA_GCRX_CXRESET PCMCIA_GCRX_CXOE
+#define __MY_PCMCIA_GCRX_CXOE PCMCIA_GCRX_CXRESET
+#else
+#define __MY_PCMCIA_GCRX_CXRESET PCMCIA_GCRX_CXRESET
+#define __MY_PCMCIA_GCRX_CXOE PCMCIA_GCRX_CXOE
+#endif
+
+#if defined(CONFIG_BLK_DEV_MPC8xx_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define PCMCIA_SCHLVL IDE0_INTERRUPT /* Status Change Interrupt Level */
+static int pcmcia_schlvl = PCMCIA_SCHLVL;
+#endif
+
+/*
+ * See include/linux/ide.h for definition of hw_regs_t (p, base)
+ */
+
+/*
+ * m8xx_ide_init_hwif_ports for a direct IDE interface _using_
+ */
+#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
+static void
+m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
+ unsigned long ctrl_port, int *irq)
+{
+ unsigned long *p = hw->io_ports;
+ int i;
+
+ typedef struct {
+ ulong br;
+ ulong or;
+ } pcmcia_win_t;
+ volatile pcmcia_win_t *win;
+ volatile pcmconf8xx_t *pcmp;
+
+ uint *pgcrx;
+ u32 pcmcia_phy_base;
+ u32 pcmcia_phy_end;
+ static unsigned long pcmcia_base = 0;
+ unsigned long base;
+
+ *p = 0;
+ if (irq)
+ *irq = 0;
+
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia));
+
+ if (!pcmcia_base) {
+ /*
+ * Read out PCMCIA registers. Since the reset values
+ * are undefined, we sure hope that they have been
+ * set up by firmware
+ */
+
+ /* Scan all registers for valid settings */
+ pcmcia_phy_base = 0xFFFFFFFF;
+ pcmcia_phy_end = 0;
+ /* br0 is start of brX and orX regs */
+ win = (pcmcia_win_t *) \
+ (&(((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0));
+ for (i = 0; i < 8; i++) {
+ if (win->or & 1) { /* This bank is marked as valid */
+ if (win->br < pcmcia_phy_base) {
+ pcmcia_phy_base = win->br;
+ }
+ if ((win->br + PCMCIA_MEM_SIZE) > pcmcia_phy_end) {
+ pcmcia_phy_end = win->br + PCMCIA_MEM_SIZE;
+ }
+ /* Check which slot that has been defined */
+ _slot_ = (win->or >> 2) & 1;
+
+ } /* Valid bank */
+ win++;
+ } /* for */
+
+ printk ("PCMCIA slot %c: phys mem %08x...%08x (size %08x)\n",
+ 'A' + _slot_,
+ pcmcia_phy_base, pcmcia_phy_end,
+ pcmcia_phy_end - pcmcia_phy_base);
+
+ pcmcia_base=(unsigned long)ioremap(pcmcia_phy_base,
+ pcmcia_phy_end-pcmcia_phy_base);
+
+#ifdef DEBUG
+ printk ("PCMCIA virt base: %08lx\n", pcmcia_base);
+#endif
+ /* Compute clock cycles for PIO timings */
+ for (i=0; i<6; ++i) {
+ bd_t *binfo = (bd_t *)__res;
+
+ hold_time[i] =
+ PCMCIA_MK_CLKS (hold_time[i],
+ binfo->bi_busfreq);
+ ide_pio_clocks[i].setup_time =
+ PCMCIA_MK_CLKS (ide_pio_timings[i].setup_time,
+ binfo->bi_busfreq);
+ ide_pio_clocks[i].active_time =
+ PCMCIA_MK_CLKS (ide_pio_timings[i].active_time,
+ binfo->bi_busfreq);
+ ide_pio_clocks[i].cycle_time =
+ PCMCIA_MK_CLKS (ide_pio_timings[i].cycle_time,
+ binfo->bi_busfreq);
+#if 0
+ printk ("PIO mode %d timings: %d/%d/%d => %d/%d/%d\n",
+ i,
+ ide_pio_clocks[i].setup_time,
+ ide_pio_clocks[i].active_time,
+ ide_pio_clocks[i].hold_time,
+ ide_pio_clocks[i].cycle_time,
+ ide_pio_timings[i].setup_time,
+ ide_pio_timings[i].active_time,
+ ide_pio_timings[i].hold_time,
+ ide_pio_timings[i].cycle_time);
+#endif
+ }
+ }
+
+ if (data_port >= MAX_HWIFS)
+ return;
+
+ if (_slot_ == -1) {
+ printk ("PCMCIA slot has not been defined! Using A as default\n");
+ _slot_ = 0;
+ }
+
+#ifdef CONFIG_IDE_8xx_PCCARD
+
+#ifdef DEBUG
+ printk ("PIPR = 0x%08X slot %c ==> mask = 0x%X\n",
+ pcmp->pcmc_pipr,
+ 'A' + _slot_,
+ M8XX_PCMCIA_CD1(_slot_) | M8XX_PCMCIA_CD2(_slot_) );
+#endif /* DEBUG */
+
+ if (pcmp->pcmc_pipr & (M8XX_PCMCIA_CD1(_slot_)|M8XX_PCMCIA_CD2(_slot_))) {
+ printk ("No card in slot %c: PIPR=%08x\n",
+ 'A' + _slot_, (u32) pcmp->pcmc_pipr);
+ return; /* No card in slot */
+ }
+
+ check_ide_device (pcmcia_base);
+
+#endif /* CONFIG_IDE_8xx_PCCARD */
+
+ base = pcmcia_base + ioport_dsc[data_port].base_off;
+#ifdef DEBUG
+ printk ("base: %08x + %08x = %08x\n",
+ pcmcia_base, ioport_dsc[data_port].base_off, base);
+#endif
+
+ for (i = 0; i < IDE_NR_PORTS; ++i) {
+#ifdef DEBUG
+ printk ("port[%d]: %08x + %08x = %08x\n",
+ i,
+ base,
+ ioport_dsc[data_port].reg_off[i],
+ i, base + ioport_dsc[data_port].reg_off[i]);
+#endif
+ *p++ = base + ioport_dsc[data_port].reg_off[i];
+ }
+
+ if (irq) {
+#ifdef CONFIG_IDE_8xx_PCCARD
+ unsigned int reg;
+
+ *irq = ioport_dsc[data_port].irq;
+ if (_slot_)
+ pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcrb;
+ else
+ pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcra;
+
+ reg = *pgcrx;
+ reg |= mk_int_int_mask (pcmcia_schlvl) << 24;
+ reg |= mk_int_int_mask (pcmcia_schlvl) << 16;
+ *pgcrx = reg;
+#else /* direct connected IDE drive, i.e. external IRQ, not the PCMCIA irq */
+ *irq = ioport_dsc[data_port].irq;
+#endif /* CONFIG_IDE_8xx_PCCARD */
+ }
+
+ /* register routine to tune PIO mode */
+ ide_hwifs[data_port].tuneproc = m8xx_ide_tuneproc;
+
+ hw->ack_intr = (ide_ack_intr_t *) ide_interrupt_ack;
+ /* Enable Harddisk Interrupt,
+ * and make it edge sensitive
+ */
+ /* (11-18) Set edge detect for irq, no wakeup from low power mode */
+ ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |=
+ (0x80000000 >> ioport_dsc[data_port].irq);
+
+#ifdef CONFIG_IDE_8xx_PCCARD
+ /* Make sure we don't get garbage irq */
+ ((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pscr = 0xFFFF;
+
+ /* Enable falling edge irq */
+ pcmp->pcmc_per = 0x100000 >> (16 * _slot_);
+#endif /* CONFIG_IDE_8xx_PCCARD */
+} /* m8xx_ide_init_hwif_ports() using 8xx internal PCMCIA interface */
+#endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */
+
+/*
+ * m8xx_ide_init_hwif_ports for a direct IDE interface _not_ using
+ * MPC8xx's internal PCMCIA interface
+ */
+#if defined(CONFIG_IDE_EXT_DIRECT)
+void m8xx_ide_init_hwif_ports (hw_regs_t *hw,
+ unsigned long data_port, unsigned long ctrl_port, int *irq)
+{
+ unsigned long *p = hw->io_ports;
+ int i;
+
+ u32 ide_phy_base;
+ u32 ide_phy_end;
+ static unsigned long ide_base = 0;
+ unsigned long base;
+
+ *p = 0;
+ if (irq)
+ *irq = 0;
+
+ if (!ide_base) {
+
+ /* TODO:
+ * - add code to read ORx, BRx
+ */
+ ide_phy_base = CFG_ATA_BASE_ADDR;
+ ide_phy_end = CFG_ATA_BASE_ADDR + 0x200;
+
+ printk ("IDE phys mem : %08x...%08x (size %08x)\n",
+ ide_phy_base, ide_phy_end,
+ ide_phy_end - ide_phy_base);
+
+ ide_base=(unsigned long)ioremap(ide_phy_base,
+ ide_phy_end-ide_phy_base);
+
+#ifdef DEBUG
+ printk ("IDE virt base: %08lx\n", ide_base);
+#endif
+ }
+
+ if (data_port >= MAX_HWIFS)
+ return;
+
+ base = ide_base + ioport_dsc[data_port].base_off;
+#ifdef DEBUG
+ printk ("base: %08x + %08x = %08x\n",
+ ide_base, ioport_dsc[data_port].base_off, base);
+#endif
+
+ for (i = 0; i < IDE_NR_PORTS; ++i) {
+#ifdef DEBUG
+ printk ("port[%d]: %08x + %08x = %08x\n",
+ i,
+ base,
+ ioport_dsc[data_port].reg_off[i],
+ i, base + ioport_dsc[data_port].reg_off[i]);
+#endif
+ *p++ = base + ioport_dsc[data_port].reg_off[i];
+ }
+
+ if (irq) {
+ /* direct connected IDE drive, i.e. external IRQ */
+ *irq = ioport_dsc[data_port].irq;
+ }
+
+ /* register routine to tune PIO mode */
+ ide_hwifs[data_port].tuneproc = m8xx_ide_tuneproc;
+
+ hw->ack_intr = (ide_ack_intr_t *) ide_interrupt_ack;
+ /* Enable Harddisk Interrupt,
+ * and make it edge sensitive
+ */
+ /* (11-18) Set edge detect for irq, no wakeup from low power mode */
+ ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |=
+ (0x80000000 >> ioport_dsc[data_port].irq);
+} /* m8xx_ide_init_hwif_ports() for CONFIG_IDE_8xx_DIRECT */
+
+#endif /* CONFIG_IDE_8xx_DIRECT */
+
+
+/* -------------------------------------------------------------------- */
+
+
+/* PCMCIA Timing */
+#ifndef PCMCIA_SHT
+#define PCMCIA_SHT(t) ((t & 0x0F)<<16) /* Strobe Hold Time */
+#define PCMCIA_SST(t) ((t & 0x0F)<<12) /* Strobe Setup Time */
+#define PCMCIA_SL(t) ((t==32) ? 0 : ((t & 0x1F)<<7)) /* Strobe Length */
+#endif
+
+
+/* Calculate PIO timings */
+static void
+m8xx_ide_tuneproc(ide_drive_t *drive, u8 pio)
+{
+ ide_pio_data_t d;
+#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
+ volatile pcmconf8xx_t *pcmp;
+ ulong timing, mask, reg;
+#endif
+
+ pio = ide_get_best_pio_mode(drive, pio, 4, &d);
+
+#if 1
+ printk("%s[%d] %s: best PIO mode: %d\n",
+ __FILE__,__LINE__,__FUNCTION__, pio);
+#endif
+
+#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia));
+
+ mask = ~(PCMCIA_SHT(0xFF) | PCMCIA_SST(0xFF) | PCMCIA_SL(0xFF));
+
+ timing = PCMCIA_SHT(hold_time[pio] )
+ | PCMCIA_SST(ide_pio_clocks[pio].setup_time )
+ | PCMCIA_SL (ide_pio_clocks[pio].active_time)
+ ;
+
+#if 1
+ printk ("Setting timing bits 0x%08lx in PCMCIA controller\n", timing);
+#endif
+ if ((reg = pcmp->pcmc_por0 & mask) != 0)
+ pcmp->pcmc_por0 = reg | timing;
+
+ if ((reg = pcmp->pcmc_por1 & mask) != 0)
+ pcmp->pcmc_por1 = reg | timing;
+
+ if ((reg = pcmp->pcmc_por2 & mask) != 0)
+ pcmp->pcmc_por2 = reg | timing;
+
+ if ((reg = pcmp->pcmc_por3 & mask) != 0)
+ pcmp->pcmc_por3 = reg | timing;
+
+ if ((reg = pcmp->pcmc_por4 & mask) != 0)
+ pcmp->pcmc_por4 = reg | timing;
+
+ if ((reg = pcmp->pcmc_por5 & mask) != 0)
+ pcmp->pcmc_por5 = reg | timing;
+
+ if ((reg = pcmp->pcmc_por6 & mask) != 0)
+ pcmp->pcmc_por6 = reg | timing;
+
+ if ((reg = pcmp->pcmc_por7 & mask) != 0)
+ pcmp->pcmc_por7 = reg | timing;
+
+#elif defined(CONFIG_IDE_EXT_DIRECT)
+
+ printk("%s[%d] %s: not implemented yet!\n",
+ __FILE__,__LINE__,__FUNCTION__);
+#endif /* defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_PCMCIA */
+}
+
+static void
+ide_interrupt_ack (void *dev)
+{
+#ifdef CONFIG_IDE_8xx_PCCARD
+ u_int pscr, pipr;
+
+#if (PCMCIA_SOCKETS_NO == 2)
+ u_int _slot_;
+#endif
+
+ /* get interrupt sources */
+
+ pscr = ((volatile immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr;
+ pipr = ((volatile immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr;
+
+ /*
+ * report only if both card detect signals are the same
+ * not too nice done,
+ * we depend on that CD2 is the bit to the left of CD1...
+ */
+
+ if(_slot_==-1){
+ printk("PCMCIA slot has not been defined! Using A as default\n");
+ _slot_=0;
+ }
+
+ if(((pipr & M8XX_PCMCIA_CD2(_slot_)) >> 1) ^
+ (pipr & M8XX_PCMCIA_CD1(_slot_)) ) {
+ printk ("card detect interrupt\n");
+ }
+ /* clear the interrupt sources */
+ ((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr = pscr;
+
+#else /* ! CONFIG_IDE_8xx_PCCARD */
+ /*
+ * Only CONFIG_IDE_8xx_PCCARD is using the interrupt of the
+ * MPC8xx's PCMCIA controller, so there is nothing to be done here
+ * for CONFIG_IDE_8xx_DIRECT and CONFIG_IDE_EXT_DIRECT.
+ * The interrupt is handled somewhere else. -- Steven
+ */
+#endif /* CONFIG_IDE_8xx_PCCARD */
+}
+
+
+
+/*
+ * CIS Tupel codes
+ */
+#define CISTPL_NULL 0x00
+#define CISTPL_DEVICE 0x01
+#define CISTPL_LONGLINK_CB 0x02
+#define CISTPL_INDIRECT 0x03
+#define CISTPL_CONFIG_CB 0x04
+#define CISTPL_CFTABLE_ENTRY_CB 0x05
+#define CISTPL_LONGLINK_MFC 0x06
+#define CISTPL_BAR 0x07
+#define CISTPL_PWR_MGMNT 0x08
+#define CISTPL_EXTDEVICE 0x09
+#define CISTPL_CHECKSUM 0x10
+#define CISTPL_LONGLINK_A 0x11
+#define CISTPL_LONGLINK_C 0x12
+#define CISTPL_LINKTARGET 0x13
+#define CISTPL_NO_LINK 0x14
+#define CISTPL_VERS_1 0x15
+#define CISTPL_ALTSTR 0x16
+#define CISTPL_DEVICE_A 0x17
+#define CISTPL_JEDEC_C 0x18
+#define CISTPL_JEDEC_A 0x19
+#define CISTPL_CONFIG 0x1a
+#define CISTPL_CFTABLE_ENTRY 0x1b
+#define CISTPL_DEVICE_OC 0x1c
+#define CISTPL_DEVICE_OA 0x1d
+#define CISTPL_DEVICE_GEO 0x1e
+#define CISTPL_DEVICE_GEO_A 0x1f
+#define CISTPL_MANFID 0x20
+#define CISTPL_FUNCID 0x21
+#define CISTPL_FUNCE 0x22
+#define CISTPL_SWIL 0x23
+#define CISTPL_END 0xff
+
+/*
+ * CIS Function ID codes
+ */
+#define CISTPL_FUNCID_MULTI 0x00
+#define CISTPL_FUNCID_MEMORY 0x01
+#define CISTPL_FUNCID_SERIAL 0x02
+#define CISTPL_FUNCID_PARALLEL 0x03
+#define CISTPL_FUNCID_FIXED 0x04
+#define CISTPL_FUNCID_VIDEO 0x05
+#define CISTPL_FUNCID_NETWORK 0x06
+#define CISTPL_FUNCID_AIMS 0x07
+#define CISTPL_FUNCID_SCSI 0x08
+
+/*
+ * Fixed Disk FUNCE codes
+ */
+#define CISTPL_IDE_INTERFACE 0x01
+
+#define CISTPL_FUNCE_IDE_IFACE 0x01
+#define CISTPL_FUNCE_IDE_MASTER 0x02
+#define CISTPL_FUNCE_IDE_SLAVE 0x03
+
+/* First feature byte */
+#define CISTPL_IDE_SILICON 0x04
+#define CISTPL_IDE_UNIQUE 0x08
+#define CISTPL_IDE_DUAL 0x10
+
+/* Second feature byte */
+#define CISTPL_IDE_HAS_SLEEP 0x01
+#define CISTPL_IDE_HAS_STANDBY 0x02
+#define CISTPL_IDE_HAS_IDLE 0x04
+#define CISTPL_IDE_LOW_POWER 0x08
+#define CISTPL_IDE_REG_INHIBIT 0x10
+#define CISTPL_IDE_HAS_INDEX 0x20
+#define CISTPL_IDE_IOIS16 0x40
+
+
+/* -------------------------------------------------------------------- */
+
+
+#define MAX_TUPEL_SZ 512
+#define MAX_FEATURES 4
+
+static int check_ide_device (unsigned long base)
+{
+ volatile u8 *ident = NULL;
+ volatile u8 *feature_p[MAX_FEATURES];
+ volatile u8 *p, *start;
+ int n_features = 0;
+ u8 func_id = ~0;
+ u8 code, len;
+ unsigned short config_base = 0;
+ int found = 0;
+ int i;
+
+#ifdef DEBUG
+ printk ("PCMCIA MEM: %08lX\n", base);
+#endif
+ start = p = (volatile u8 *) base;
+
+ while ((p - start) < MAX_TUPEL_SZ) {
+
+ code = *p; p += 2;
+
+ if (code == 0xFF) { /* End of chain */
+ break;
+ }
+
+ len = *p; p += 2;
+#ifdef DEBUG_PCMCIA
+ { volatile u8 *q = p;
+ printk ("\nTuple code %02x length %d\n\tData:",
+ code, len);
+
+ for (i = 0; i < len; ++i) {
+ printk (" %02x", *q);
+ q+= 2;
+ }
+ }
+#endif /* DEBUG_PCMCIA */
+ switch (code) {
+ case CISTPL_VERS_1:
+ ident = p + 4;
+ break;
+ case CISTPL_FUNCID:
+ func_id = *p;
+ break;
+ case CISTPL_FUNCE:
+ if (n_features < MAX_FEATURES)
+ feature_p[n_features++] = p;
+ break;
+ case CISTPL_CONFIG:
+ config_base = (*(p+6) << 8) + (*(p+4));
+ default:
+ break;
+ }
+ p += 2 * len;
+ }
+
+ found = identify (ident);
+
+ if (func_id != ((u8)~0)) {
+ print_funcid (func_id);
+
+ if (func_id == CISTPL_FUNCID_FIXED)
+ found = 1;
+ else
+ return (1); /* no disk drive */
+ }
+
+ for (i=0; i<n_features; ++i) {
+ print_fixed (feature_p[i]);
+ }
+
+ if (!found) {
+ printk ("unknown card type\n");
+ return (1);
+ }
+
+ /* set level mode irq and I/O mapped device in config reg*/
+ *((u8 *)(base + config_base)) = 0x41;
+
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+static void print_funcid (int func)
+{
+ switch (func) {
+ case CISTPL_FUNCID_MULTI:
+ printk (" Multi-Function");
+ break;
+ case CISTPL_FUNCID_MEMORY:
+ printk (" Memory");
+ break;
+ case CISTPL_FUNCID_SERIAL:
+ printk (" Serial Port");
+ break;
+ case CISTPL_FUNCID_PARALLEL:
+ printk (" Parallel Port");
+ break;
+ case CISTPL_FUNCID_FIXED:
+ printk (" Fixed Disk");
+ break;
+ case CISTPL_FUNCID_VIDEO:
+ printk (" Video Adapter");
+ break;
+ case CISTPL_FUNCID_NETWORK:
+ printk (" Network Adapter");
+ break;
+ case CISTPL_FUNCID_AIMS:
+ printk (" AIMS Card");
+ break;
+ case CISTPL_FUNCID_SCSI:
+ printk (" SCSI Adapter");
+ break;
+ default:
+ printk (" Unknown");
+ break;
+ }
+ printk (" Card\n");
+}
+
+/* ------------------------------------------------------------------------- */
+
+static void print_fixed (volatile u8 *p)
+{
+ if (p == NULL)
+ return;
+
+ switch (*p) {
+ case CISTPL_FUNCE_IDE_IFACE:
+ { u8 iface = *(p+2);
+
+ printk ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown");
+ printk (" interface ");
+ break;
+ }
+ case CISTPL_FUNCE_IDE_MASTER:
+ case CISTPL_FUNCE_IDE_SLAVE:
+ { u8 f1 = *(p+2);
+ u8 f2 = *(p+4);
+
+ printk ((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]");
+
+ if (f1 & CISTPL_IDE_UNIQUE)
+ printk (" [unique]");
+
+ printk ((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]");
+
+ if (f2 & CISTPL_IDE_HAS_SLEEP)
+ printk (" [sleep]");
+
+ if (f2 & CISTPL_IDE_HAS_STANDBY)
+ printk (" [standby]");
+
+ if (f2 & CISTPL_IDE_HAS_IDLE)
+ printk (" [idle]");
+
+ if (f2 & CISTPL_IDE_LOW_POWER)
+ printk (" [low power]");
+
+ if (f2 & CISTPL_IDE_REG_INHIBIT)
+ printk (" [reg inhibit]");
+
+ if (f2 & CISTPL_IDE_HAS_INDEX)
+ printk (" [index]");
+
+ if (f2 & CISTPL_IDE_IOIS16)
+ printk (" [IOis16]");
+
+ break;
+ }
+ }
+ printk ("\n");
+}
+
+/* ------------------------------------------------------------------------- */
+
+
+#define MAX_IDENT_CHARS 64
+#define MAX_IDENT_FIELDS 4
+
+static u8 *known_cards[] = {
+ "ARGOSY PnPIDE D5",
+ NULL
+};
+
+static int identify (volatile u8 *p)
+{
+ u8 id_str[MAX_IDENT_CHARS];
+ u8 data;
+ u8 *t;
+ u8 **card;
+ int i, done;
+
+ if (p == NULL)
+ return (0); /* Don't know */
+
+ t = id_str;
+ done =0;
+
+ for (i=0; i<=4 && !done; ++i, p+=2) {
+ while ((data = *p) != '\0') {
+ if (data == 0xFF) {
+ done = 1;
+ break;
+ }
+ *t++ = data;
+ if (t == &id_str[MAX_IDENT_CHARS-1]) {
+ done = 1;
+ break;
+ }
+ p += 2;
+ }
+ if (!done)
+ *t++ = ' ';
+ }
+ *t = '\0';
+ while (--t > id_str) {
+ if (*t == ' ')
+ *t = '\0';
+ else
+ break;
+ }
+ printk ("Card ID: %s\n", id_str);
+
+ for (card=known_cards; *card; ++card) {
+ if (strcmp(*card, id_str) == 0) { /* found! */
+ return (1);
+ }
+ }
+
+ return (0); /* don't know */
+}
+
+void m8xx_ide_init(void)
+{
+ ppc_ide_md.default_irq = m8xx_ide_default_irq;
+ ppc_ide_md.default_io_base = m8xx_ide_default_io_base;
+ ppc_ide_md.ide_init_hwif = m8xx_ide_init_hwif_ports;
+}
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
new file mode 100644
index 0000000..6dc273a
--- /dev/null
+++ b/drivers/ide/ppc/pmac.c
@@ -0,0 +1,2208 @@
+/*
+ * linux/drivers/ide/ide-pmac.c
+ *
+ * Support for IDE interfaces on PowerMacs.
+ * These IDE interfaces are memory-mapped and have a DBDMA channel
+ * for doing DMA.
+ *
+ * Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Some code taken from drivers/ide/ide-dma.c:
+ *
+ * Copyright (c) 1995-1998 Mark Lord
+ *
+ * TODO: - Use pre-calculated (kauai) timing tables all the time and
+ * get rid of the "rounded" tables used previously, so we have the
+ * same table format for all controllers and can then just have one
+ * big table
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/scatterlist.h>
+
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/dbdma.h>
+#include <asm/ide.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/sections.h>
+#include <asm/irq.h>
+
+#ifndef CONFIG_PPC64
+#include <asm/mediabay.h>
+#endif
+
+#include "ide-timing.h"
+
+#undef IDE_PMAC_DEBUG
+
+#define DMA_WAIT_TIMEOUT 50
+
+typedef struct pmac_ide_hwif {
+ unsigned long regbase;
+ int irq;
+ int kind;
+ int aapl_bus_id;
+ unsigned cable_80 : 1;
+ unsigned mediabay : 1;
+ unsigned broken_dma : 1;
+ unsigned broken_dma_warn : 1;
+ struct device_node* node;
+ struct macio_dev *mdev;
+ u32 timings[4];
+ volatile u32 __iomem * *kauai_fcr;
+#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+ /* Those fields are duplicating what is in hwif. We currently
+ * can't use the hwif ones because of some assumptions that are
+ * beeing done by the generic code about the kind of dma controller
+ * and format of the dma table. This will have to be fixed though.
+ */
+ volatile struct dbdma_regs __iomem * dma_regs;
+ struct dbdma_cmd* dma_table_cpu;
+#endif
+
+} pmac_ide_hwif_t;
+
+static pmac_ide_hwif_t pmac_ide[MAX_HWIFS] __pmacdata;
+static int pmac_ide_count;
+
+enum {
+ controller_ohare, /* OHare based */
+ controller_heathrow, /* Heathrow/Paddington */
+ controller_kl_ata3, /* KeyLargo ATA-3 */
+ controller_kl_ata4, /* KeyLargo ATA-4 */
+ controller_un_ata6, /* UniNorth2 ATA-6 */
+ controller_k2_ata6, /* K2 ATA-6 */
+ controller_sh_ata6, /* Shasta ATA-6 */
+};
+
+static const char* model_name[] = {
+ "OHare ATA", /* OHare based */
+ "Heathrow ATA", /* Heathrow/Paddington */
+ "KeyLargo ATA-3", /* KeyLargo ATA-3 (MDMA only) */
+ "KeyLargo ATA-4", /* KeyLargo ATA-4 (UDMA/66) */
+ "UniNorth ATA-6", /* UniNorth2 ATA-6 (UDMA/100) */
+ "K2 ATA-6", /* K2 ATA-6 (UDMA/100) */
+ "Shasta ATA-6", /* Shasta ATA-6 (UDMA/133) */
+};
+
+/*
+ * Extra registers, both 32-bit little-endian
+ */
+#define IDE_TIMING_CONFIG 0x200
+#define IDE_INTERRUPT 0x300
+
+/* Kauai (U2) ATA has different register setup */
+#define IDE_KAUAI_PIO_CONFIG 0x200
+#define IDE_KAUAI_ULTRA_CONFIG 0x210
+#define IDE_KAUAI_POLL_CONFIG 0x220
+
+/*
+ * Timing configuration register definitions
+ */
+
+/* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */
+#define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS)
+#define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS)
+#define IDE_SYSCLK_NS 30 /* 33Mhz cell */
+#define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */
+
+/* 133Mhz cell, found in shasta.
+ * See comments about 100 Mhz Uninorth 2...
+ * Note that PIO_MASK and MDMA_MASK seem to overlap
+ */
+#define TR_133_PIOREG_PIO_MASK 0xff000fff
+#define TR_133_PIOREG_MDMA_MASK 0x00fff800
+#define TR_133_UDMAREG_UDMA_MASK 0x0003ffff
+#define TR_133_UDMAREG_UDMA_EN 0x00000001
+
+/* 100Mhz cell, found in Uninorth 2. I don't have much infos about
+ * this one yet, it appears as a pci device (106b/0033) on uninorth
+ * internal PCI bus and it's clock is controlled like gem or fw. It
+ * appears to be an evolution of keylargo ATA4 with a timing register
+ * extended to 2 32bits registers and a similar DBDMA channel. Other
+ * registers seem to exist but I can't tell much about them.
+ *
+ * So far, I'm using pre-calculated tables for this extracted from
+ * the values used by the MacOS X driver.
+ *
+ * The "PIO" register controls PIO and MDMA timings, the "ULTRA"
+ * register controls the UDMA timings. At least, it seems bit 0
+ * of this one enables UDMA vs. MDMA, and bits 4..7 are the
+ * cycle time in units of 10ns. Bits 8..15 are used by I don't
+ * know their meaning yet
+ */
+#define TR_100_PIOREG_PIO_MASK 0xff000fff
+#define TR_100_PIOREG_MDMA_MASK 0x00fff000
+#define TR_100_UDMAREG_UDMA_MASK 0x0000ffff
+#define TR_100_UDMAREG_UDMA_EN 0x00000001
+
+
+/* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on
+ * 40 connector cable and to 4 on 80 connector one.
+ * Clock unit is 15ns (66Mhz)
+ *
+ * 3 Values can be programmed:
+ * - Write data setup, which appears to match the cycle time. They
+ * also call it DIOW setup.
+ * - Ready to pause time (from spec)
+ * - Address setup. That one is weird. I don't see where exactly
+ * it fits in UDMA cycles, I got it's name from an obscure piece
+ * of commented out code in Darwin. They leave it to 0, we do as
+ * well, despite a comment that would lead to think it has a
+ * min value of 45ns.
+ * Apple also add 60ns to the write data setup (or cycle time ?) on
+ * reads.
+ */
+#define TR_66_UDMA_MASK 0xfff00000
+#define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */
+#define TR_66_UDMA_ADDRSETUP_MASK 0xe0000000 /* Address setup */
+#define TR_66_UDMA_ADDRSETUP_SHIFT 29
+#define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */
+#define TR_66_UDMA_RDY2PAUS_SHIFT 25
+#define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */
+#define TR_66_UDMA_WRDATASETUP_SHIFT 21
+#define TR_66_MDMA_MASK 0x000ffc00
+#define TR_66_MDMA_RECOVERY_MASK 0x000f8000
+#define TR_66_MDMA_RECOVERY_SHIFT 15
+#define TR_66_MDMA_ACCESS_MASK 0x00007c00
+#define TR_66_MDMA_ACCESS_SHIFT 10
+#define TR_66_PIO_MASK 0x000003ff
+#define TR_66_PIO_RECOVERY_MASK 0x000003e0
+#define TR_66_PIO_RECOVERY_SHIFT 5
+#define TR_66_PIO_ACCESS_MASK 0x0000001f
+#define TR_66_PIO_ACCESS_SHIFT 0
+
+/* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo
+ * Can do pio & mdma modes, clock unit is 30ns (33Mhz)
+ *
+ * The access time and recovery time can be programmed. Some older
+ * Darwin code base limit OHare to 150ns cycle time. I decided to do
+ * the same here fore safety against broken old hardware ;)
+ * The HalfTick bit, when set, adds half a clock (15ns) to the access
+ * time and removes one from recovery. It's not supported on KeyLargo
+ * implementation afaik. The E bit appears to be set for PIO mode 0 and
+ * is used to reach long timings used in this mode.
+ */
+#define TR_33_MDMA_MASK 0x003ff800
+#define TR_33_MDMA_RECOVERY_MASK 0x001f0000
+#define TR_33_MDMA_RECOVERY_SHIFT 16
+#define TR_33_MDMA_ACCESS_MASK 0x0000f800
+#define TR_33_MDMA_ACCESS_SHIFT 11
+#define TR_33_MDMA_HALFTICK 0x00200000
+#define TR_33_PIO_MASK 0x000007ff
+#define TR_33_PIO_E 0x00000400
+#define TR_33_PIO_RECOVERY_MASK 0x000003e0
+#define TR_33_PIO_RECOVERY_SHIFT 5
+#define TR_33_PIO_ACCESS_MASK 0x0000001f
+#define TR_33_PIO_ACCESS_SHIFT 0
+
+/*
+ * Interrupt register definitions
+ */
+#define IDE_INTR_DMA 0x80000000
+#define IDE_INTR_DEVICE 0x40000000
+
+/*
+ * FCR Register on Kauai. Not sure what bit 0x4 is ...
+ */
+#define KAUAI_FCR_UATA_MAGIC 0x00000004
+#define KAUAI_FCR_UATA_RESET_N 0x00000002
+#define KAUAI_FCR_UATA_ENABLE 0x00000001
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+
+/* Rounded Multiword DMA timings
+ *
+ * I gave up finding a generic formula for all controller
+ * types and instead, built tables based on timing values
+ * used by Apple in Darwin's implementation.
+ */
+struct mdma_timings_t {
+ int accessTime;
+ int recoveryTime;
+ int cycleTime;
+};
+
+struct mdma_timings_t mdma_timings_33[] __pmacdata =
+{
+ { 240, 240, 480 },
+ { 180, 180, 360 },
+ { 135, 135, 270 },
+ { 120, 120, 240 },
+ { 105, 105, 210 },
+ { 90, 90, 180 },
+ { 75, 75, 150 },
+ { 75, 45, 120 },
+ { 0, 0, 0 }
+};
+
+struct mdma_timings_t mdma_timings_33k[] __pmacdata =
+{
+ { 240, 240, 480 },
+ { 180, 180, 360 },
+ { 150, 150, 300 },
+ { 120, 120, 240 },
+ { 90, 120, 210 },
+ { 90, 90, 180 },
+ { 90, 60, 150 },
+ { 90, 30, 120 },
+ { 0, 0, 0 }
+};
+
+struct mdma_timings_t mdma_timings_66[] __pmacdata =
+{
+ { 240, 240, 480 },
+ { 180, 180, 360 },
+ { 135, 135, 270 },
+ { 120, 120, 240 },
+ { 105, 105, 210 },
+ { 90, 90, 180 },
+ { 90, 75, 165 },
+ { 75, 45, 120 },
+ { 0, 0, 0 }
+};
+
+/* KeyLargo ATA-4 Ultra DMA timings (rounded) */
+struct {
+ int addrSetup; /* ??? */
+ int rdy2pause;
+ int wrDataSetup;
+} kl66_udma_timings[] __pmacdata =
+{
+ { 0, 180, 120 }, /* Mode 0 */
+ { 0, 150, 90 }, /* 1 */
+ { 0, 120, 60 }, /* 2 */
+ { 0, 90, 45 }, /* 3 */
+ { 0, 90, 30 } /* 4 */
+};
+
+/* UniNorth 2 ATA/100 timings */
+struct kauai_timing {
+ int cycle_time;
+ u32 timing_reg;
+};
+
+static struct kauai_timing kauai_pio_timings[] __pmacdata =
+{
+ { 930 , 0x08000fff },
+ { 600 , 0x08000a92 },
+ { 383 , 0x0800060f },
+ { 360 , 0x08000492 },
+ { 330 , 0x0800048f },
+ { 300 , 0x080003cf },
+ { 270 , 0x080003cc },
+ { 240 , 0x0800038b },
+ { 239 , 0x0800030c },
+ { 180 , 0x05000249 },
+ { 120 , 0x04000148 }
+};
+
+static struct kauai_timing kauai_mdma_timings[] __pmacdata =
+{
+ { 1260 , 0x00fff000 },
+ { 480 , 0x00618000 },
+ { 360 , 0x00492000 },
+ { 270 , 0x0038e000 },
+ { 240 , 0x0030c000 },
+ { 210 , 0x002cb000 },
+ { 180 , 0x00249000 },
+ { 150 , 0x00209000 },
+ { 120 , 0x00148000 },
+ { 0 , 0 },
+};
+
+static struct kauai_timing kauai_udma_timings[] __pmacdata =
+{
+ { 120 , 0x000070c0 },
+ { 90 , 0x00005d80 },
+ { 60 , 0x00004a60 },
+ { 45 , 0x00003a50 },
+ { 30 , 0x00002a30 },
+ { 20 , 0x00002921 },
+ { 0 , 0 },
+};
+
+static struct kauai_timing shasta_pio_timings[] __pmacdata =
+{
+ { 930 , 0x08000fff },
+ { 600 , 0x0A000c97 },
+ { 383 , 0x07000712 },
+ { 360 , 0x040003cd },
+ { 330 , 0x040003cd },
+ { 300 , 0x040003cd },
+ { 270 , 0x040003cd },
+ { 240 , 0x040003cd },
+ { 239 , 0x040003cd },
+ { 180 , 0x0400028b },
+ { 120 , 0x0400010a }
+};
+
+static struct kauai_timing shasta_mdma_timings[] __pmacdata =
+{
+ { 1260 , 0x00fff000 },
+ { 480 , 0x00820800 },
+ { 360 , 0x00820800 },
+ { 270 , 0x00820800 },
+ { 240 , 0x00820800 },
+ { 210 , 0x00820800 },
+ { 180 , 0x00820800 },
+ { 150 , 0x0028b000 },
+ { 120 , 0x001ca000 },
+ { 0 , 0 },
+};
+
+static struct kauai_timing shasta_udma133_timings[] __pmacdata =
+{
+ { 120 , 0x00035901, },
+ { 90 , 0x000348b1, },
+ { 60 , 0x00033881, },
+ { 45 , 0x00033861, },
+ { 30 , 0x00033841, },
+ { 20 , 0x00033031, },
+ { 15 , 0x00033021, },
+ { 0 , 0 },
+};
+
+
+static inline u32
+kauai_lookup_timing(struct kauai_timing* table, int cycle_time)
+{
+ int i;
+
+ for (i=0; table[i].cycle_time; i++)
+ if (cycle_time > table[i+1].cycle_time)
+ return table[i].timing_reg;
+ return 0;
+}
+
+/* allow up to 256 DBDMA commands per xfer */
+#define MAX_DCMDS 256
+
+/*
+ * Wait 1s for disk to answer on IDE bus after a hard reset
+ * of the device (via GPIO/FCR).
+ *
+ * Some devices seem to "pollute" the bus even after dropping
+ * the BSY bit (typically some combo drives slave on the UDMA
+ * bus) after a hard reset. Since we hard reset all drives on
+ * KeyLargo ATA66, we have to keep that delay around. I may end
+ * up not hard resetting anymore on these and keep the delay only
+ * for older interfaces instead (we have to reset when coming
+ * from MacOS...) --BenH.
+ */
+#define IDE_WAKEUP_DELAY (1*HZ)
+
+static void pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
+static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
+static int pmac_ide_tune_chipset(ide_drive_t *drive, u8 speed);
+static void pmac_ide_tuneproc(ide_drive_t *drive, u8 pio);
+static void pmac_ide_selectproc(ide_drive_t *drive);
+static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
+
+#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
+/*
+ * Below is the code for blinking the laptop LED along with hard
+ * disk activity.
+ */
+
+#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
+
+/* Set to 50ms minimum led-on time (also used to limit frequency
+ * of requests sent to the PMU
+ */
+#define PMU_HD_BLINK_TIME (HZ/50)
+
+static struct adb_request pmu_blink_on, pmu_blink_off;
+static spinlock_t pmu_blink_lock;
+static unsigned long pmu_blink_stoptime;
+static int pmu_blink_ledstate;
+static struct timer_list pmu_blink_timer;
+static int pmu_ide_blink_enabled;
+
+
+static void
+pmu_hd_blink_timeout(unsigned long data)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_blink_lock, flags);
+
+ /* We may have been triggered again in a racy way, check
+ * that we really want to switch it off
+ */
+ if (time_after(pmu_blink_stoptime, jiffies))
+ goto done;
+
+ /* Previous req. not complete, try 100ms more */
+ if (pmu_blink_off.complete == 0)
+ mod_timer(&pmu_blink_timer, jiffies + PMU_HD_BLINK_TIME);
+ else if (pmu_blink_ledstate) {
+ pmu_request(&pmu_blink_off, NULL, 4, 0xee, 4, 0, 0);
+ pmu_blink_ledstate = 0;
+ }
+done:
+ spin_unlock_irqrestore(&pmu_blink_lock, flags);
+}
+
+static void
+pmu_hd_kick_blink(void *data, int rw)
+{
+ unsigned long flags;
+
+ pmu_blink_stoptime = jiffies + PMU_HD_BLINK_TIME;
+ wmb();
+ mod_timer(&pmu_blink_timer, pmu_blink_stoptime);
+ /* Fast path when LED is already ON */
+ if (pmu_blink_ledstate == 1)
+ return;
+ spin_lock_irqsave(&pmu_blink_lock, flags);
+ if (pmu_blink_on.complete && !pmu_blink_ledstate) {
+ pmu_request(&pmu_blink_on, NULL, 4, 0xee, 4, 0, 1);
+ pmu_blink_ledstate = 1;
+ }
+ spin_unlock_irqrestore(&pmu_blink_lock, flags);
+}
+
+static int
+pmu_hd_blink_init(void)
+{
+ struct device_node *dt;
+ const char *model;
+
+ /* Currently, I only enable this feature on KeyLargo based laptops,
+ * older laptops may support it (at least heathrow/paddington) but
+ * I don't feel like loading those venerable old machines with so
+ * much additional interrupt & PMU activity...
+ */
+ if (pmu_get_model() != PMU_KEYLARGO_BASED)
+ return 0;
+
+ dt = find_devices("device-tree");
+ if (dt == NULL)
+ return 0;
+ model = (const char *)get_property(dt, "model", NULL);
+ if (model == NULL)
+ return 0;
+ if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 &&
+ strncmp(model, "iBook", strlen("iBook")) != 0)
+ return 0;
+
+ pmu_blink_on.complete = 1;
+ pmu_blink_off.complete = 1;
+ spin_lock_init(&pmu_blink_lock);
+ init_timer(&pmu_blink_timer);
+ pmu_blink_timer.function = pmu_hd_blink_timeout;
+
+ return 1;
+}
+
+#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */
+
+/*
+ * N.B. this can't be an initfunc, because the media-bay task can
+ * call ide_[un]register at any time.
+ */
+void __pmac
+pmac_ide_init_hwif_ports(hw_regs_t *hw,
+ unsigned long data_port, unsigned long ctrl_port,
+ int *irq)
+{
+ int i, ix;
+
+ if (data_port == 0)
+ return;
+
+ for (ix = 0; ix < MAX_HWIFS; ++ix)
+ if (data_port == pmac_ide[ix].regbase)
+ break;
+
+ if (ix >= MAX_HWIFS) {
+ /* Probably a PCI interface... */
+ for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; ++i)
+ hw->io_ports[i] = data_port + i - IDE_DATA_OFFSET;
+ hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
+ return;
+ }
+
+ for (i = 0; i < 8; ++i)
+ hw->io_ports[i] = data_port + i * 0x10;
+ hw->io_ports[8] = data_port + 0x160;
+
+ if (irq != NULL)
+ *irq = pmac_ide[ix].irq;
+}
+
+#define PMAC_IDE_REG(x) ((void __iomem *)(IDE_DATA_REG+(x)))
+
+/*
+ * Apply the timings of the proper unit (master/slave) to the shared
+ * timing register when selecting that unit. This version is for
+ * ASICs with a single timing register
+ */
+static void __pmac
+pmac_ide_selectproc(ide_drive_t *drive)
+{
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+
+ if (pmif == NULL)
+ return;
+
+ if (drive->select.b.unit & 0x01)
+ writel(pmif->timings[1], PMAC_IDE_REG(IDE_TIMING_CONFIG));
+ else
+ writel(pmif->timings[0], PMAC_IDE_REG(IDE_TIMING_CONFIG));
+ (void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG));
+}
+
+/*
+ * Apply the timings of the proper unit (master/slave) to the shared
+ * timing register when selecting that unit. This version is for
+ * ASICs with a dual timing register (Kauai)
+ */
+static void __pmac
+pmac_ide_kauai_selectproc(ide_drive_t *drive)
+{
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+
+ if (pmif == NULL)
+ return;
+
+ if (drive->select.b.unit & 0x01) {
+ writel(pmif->timings[1], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG));
+ writel(pmif->timings[3], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG));
+ } else {
+ writel(pmif->timings[0], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG));
+ writel(pmif->timings[2], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG));
+ }
+ (void)readl(PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG));
+}
+
+/*
+ * Force an update of controller timing values for a given drive
+ */
+static void __pmac
+pmac_ide_do_update_timings(ide_drive_t *drive)
+{
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+
+ if (pmif == NULL)
+ return;
+
+ if (pmif->kind == controller_sh_ata6 ||
+ pmif->kind == controller_un_ata6 ||
+ pmif->kind == controller_k2_ata6)
+ pmac_ide_kauai_selectproc(drive);
+ else
+ pmac_ide_selectproc(drive);
+}
+
+static void
+pmac_outbsync(ide_drive_t *drive, u8 value, unsigned long port)
+{
+ u32 tmp;
+
+ writeb(value, (void __iomem *) port);
+ tmp = readl(PMAC_IDE_REG(IDE_TIMING_CONFIG));
+}
+
+/*
+ * Send the SET_FEATURE IDE command to the drive and update drive->id with
+ * the new state. We currently don't use the generic routine as it used to
+ * cause various trouble, especially with older mediabays.
+ * This code is sometimes triggering a spurrious interrupt though, I need
+ * to sort that out sooner or later and see if I can finally get the
+ * common version to work properly in all cases
+ */
+static int __pmac
+pmac_ide_do_setfeature(ide_drive_t *drive, u8 command)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ int result = 1;
+
+ disable_irq_nosync(hwif->irq);
+ udelay(1);
+ SELECT_DRIVE(drive);
+ SELECT_MASK(drive, 0);
+ udelay(1);
+ /* Get rid of pending error state */
+ (void) hwif->INB(IDE_STATUS_REG);
+ /* Timeout bumped for some powerbooks */
+ if (wait_for_ready(drive, 2000)) {
+ /* Timeout bumped for some powerbooks */
+ printk(KERN_ERR "%s: pmac_ide_do_setfeature disk not ready "
+ "before SET_FEATURE!\n", drive->name);
+ goto out;
+ }
+ udelay(10);
+ hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
+ hwif->OUTB(command, IDE_NSECTOR_REG);
+ hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
+ hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
+ udelay(1);
+ /* Timeout bumped for some powerbooks */
+ result = wait_for_ready(drive, 2000);
+ hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
+ if (result)
+ printk(KERN_ERR "%s: pmac_ide_do_setfeature disk not ready "
+ "after SET_FEATURE !\n", drive->name);
+out:
+ SELECT_MASK(drive, 0);
+ if (result == 0) {
+ drive->id->dma_ultra &= ~0xFF00;
+ drive->id->dma_mword &= ~0x0F00;
+ drive->id->dma_1word &= ~0x0F00;
+ switch(command) {
+ case XFER_UDMA_7:
+ drive->id->dma_ultra |= 0x8080; break;
+ case XFER_UDMA_6:
+ drive->id->dma_ultra |= 0x4040; break;
+ case XFER_UDMA_5:
+ drive->id->dma_ultra |= 0x2020; break;
+ case XFER_UDMA_4:
+ drive->id->dma_ultra |= 0x1010; break;
+ case XFER_UDMA_3:
+ drive->id->dma_ultra |= 0x0808; break;
+ case XFER_UDMA_2:
+ drive->id->dma_ultra |= 0x0404; break;
+ case XFER_UDMA_1:
+ drive->id->dma_ultra |= 0x0202; break;
+ case XFER_UDMA_0:
+ drive->id->dma_ultra |= 0x0101; break;
+ case XFER_MW_DMA_2:
+ drive->id->dma_mword |= 0x0404; break;
+ case XFER_MW_DMA_1:
+ drive->id->dma_mword |= 0x0202; break;
+ case XFER_MW_DMA_0:
+ drive->id->dma_mword |= 0x0101; break;
+ case XFER_SW_DMA_2:
+ drive->id->dma_1word |= 0x0404; break;
+ case XFER_SW_DMA_1:
+ drive->id->dma_1word |= 0x0202; break;
+ case XFER_SW_DMA_0:
+ drive->id->dma_1word |= 0x0101; break;
+ default: break;
+ }
+ }
+ enable_irq(hwif->irq);
+ return result;
+}
+
+/*
+ * Old tuning functions (called on hdparm -p), sets up drive PIO timings
+ */
+static void __pmac
+pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
+{
+ ide_pio_data_t d;
+ u32 *timings;
+ unsigned accessTicks, recTicks;
+ unsigned accessTime, recTime;
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+
+ if (pmif == NULL)
+ return;
+
+ /* which drive is it ? */
+ timings = &pmif->timings[drive->select.b.unit & 0x01];
+
+ pio = ide_get_best_pio_mode(drive, pio, 4, &d);
+
+ switch (pmif->kind) {
+ case controller_sh_ata6: {
+ /* 133Mhz cell */
+ u32 tr = kauai_lookup_timing(shasta_pio_timings, d.cycle_time);
+ if (tr == 0)
+ return;
+ *timings = ((*timings) & ~TR_133_PIOREG_PIO_MASK) | tr;
+ break;
+ }
+ case controller_un_ata6:
+ case controller_k2_ata6: {
+ /* 100Mhz cell */
+ u32 tr = kauai_lookup_timing(kauai_pio_timings, d.cycle_time);
+ if (tr == 0)
+ return;
+ *timings = ((*timings) & ~TR_100_PIOREG_PIO_MASK) | tr;
+ break;
+ }
+ case controller_kl_ata4:
+ /* 66Mhz cell */
+ recTime = d.cycle_time - ide_pio_timings[pio].active_time
+ - ide_pio_timings[pio].setup_time;
+ recTime = max(recTime, 150U);
+ accessTime = ide_pio_timings[pio].active_time;
+ accessTime = max(accessTime, 150U);
+ accessTicks = SYSCLK_TICKS_66(accessTime);
+ accessTicks = min(accessTicks, 0x1fU);
+ recTicks = SYSCLK_TICKS_66(recTime);
+ recTicks = min(recTicks, 0x1fU);
+ *timings = ((*timings) & ~TR_66_PIO_MASK) |
+ (accessTicks << TR_66_PIO_ACCESS_SHIFT) |
+ (recTicks << TR_66_PIO_RECOVERY_SHIFT);
+ break;
+ default: {
+ /* 33Mhz cell */
+ int ebit = 0;
+ recTime = d.cycle_time - ide_pio_timings[pio].active_time
+ - ide_pio_timings[pio].setup_time;
+ recTime = max(recTime, 150U);
+ accessTime = ide_pio_timings[pio].active_time;
+ accessTime = max(accessTime, 150U);
+ accessTicks = SYSCLK_TICKS(accessTime);
+ accessTicks = min(accessTicks, 0x1fU);
+ accessTicks = max(accessTicks, 4U);
+ recTicks = SYSCLK_TICKS(recTime);
+ recTicks = min(recTicks, 0x1fU);
+ recTicks = max(recTicks, 5U) - 4;
+ if (recTicks > 9) {
+ recTicks--; /* guess, but it's only for PIO0, so... */
+ ebit = 1;
+ }
+ *timings = ((*timings) & ~TR_33_PIO_MASK) |
+ (accessTicks << TR_33_PIO_ACCESS_SHIFT) |
+ (recTicks << TR_33_PIO_RECOVERY_SHIFT);
+ if (ebit)
+ *timings |= TR_33_PIO_E;
+ break;
+ }
+ }
+
+#ifdef IDE_PMAC_DEBUG
+ printk(KERN_ERR "%s: Set PIO timing for mode %d, reg: 0x%08x\n",
+ drive->name, pio, *timings);
+#endif
+
+ if (drive->select.all == HWIF(drive)->INB(IDE_SELECT_REG))
+ pmac_ide_do_update_timings(drive);
+}
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+
+/*
+ * Calculate KeyLargo ATA/66 UDMA timings
+ */
+static int __pmac
+set_timings_udma_ata4(u32 *timings, u8 speed)
+{
+ unsigned rdyToPauseTicks, wrDataSetupTicks, addrTicks;
+
+ if (speed > XFER_UDMA_4)
+ return 1;
+
+ rdyToPauseTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].rdy2pause);
+ wrDataSetupTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].wrDataSetup);
+ addrTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].addrSetup);
+
+ *timings = ((*timings) & ~(TR_66_UDMA_MASK | TR_66_MDMA_MASK)) |
+ (wrDataSetupTicks << TR_66_UDMA_WRDATASETUP_SHIFT) |
+ (rdyToPauseTicks << TR_66_UDMA_RDY2PAUS_SHIFT) |
+ (addrTicks <<TR_66_UDMA_ADDRSETUP_SHIFT) |
+ TR_66_UDMA_EN;
+#ifdef IDE_PMAC_DEBUG
+ printk(KERN_ERR "ide_pmac: Set UDMA timing for mode %d, reg: 0x%08x\n",
+ speed & 0xf, *timings);
+#endif
+
+ return 0;
+}
+
+/*
+ * Calculate Kauai ATA/100 UDMA timings
+ */
+static int __pmac
+set_timings_udma_ata6(u32 *pio_timings, u32 *ultra_timings, u8 speed)
+{
+ struct ide_timing *t = ide_timing_find_mode(speed);
+ u32 tr;
+
+ if (speed > XFER_UDMA_5 || t == NULL)
+ return 1;
+ tr = kauai_lookup_timing(kauai_udma_timings, (int)t->udma);
+ if (tr == 0)
+ return 1;
+ *ultra_timings = ((*ultra_timings) & ~TR_100_UDMAREG_UDMA_MASK) | tr;
+ *ultra_timings = (*ultra_timings) | TR_100_UDMAREG_UDMA_EN;
+
+ return 0;
+}
+
+/*
+ * Calculate Shasta ATA/133 UDMA timings
+ */
+static int __pmac
+set_timings_udma_shasta(u32 *pio_timings, u32 *ultra_timings, u8 speed)
+{
+ struct ide_timing *t = ide_timing_find_mode(speed);
+ u32 tr;
+
+ if (speed > XFER_UDMA_6 || t == NULL)
+ return 1;
+ tr = kauai_lookup_timing(shasta_udma133_timings, (int)t->udma);
+ if (tr == 0)
+ return 1;
+ *ultra_timings = ((*ultra_timings) & ~TR_133_UDMAREG_UDMA_MASK) | tr;
+ *ultra_timings = (*ultra_timings) | TR_133_UDMAREG_UDMA_EN;
+
+ return 0;
+}
+
+/*
+ * Calculate MDMA timings for all cells
+ */
+static int __pmac
+set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
+ u8 speed, int drive_cycle_time)
+{
+ int cycleTime, accessTime = 0, recTime = 0;
+ unsigned accessTicks, recTicks;
+ struct mdma_timings_t* tm = NULL;
+ int i;
+
+ /* Get default cycle time for mode */
+ switch(speed & 0xf) {
+ case 0: cycleTime = 480; break;
+ case 1: cycleTime = 150; break;
+ case 2: cycleTime = 120; break;
+ default:
+ return 1;
+ }
+ /* Adjust for drive */
+ if (drive_cycle_time && drive_cycle_time > cycleTime)
+ cycleTime = drive_cycle_time;
+ /* OHare limits according to some old Apple sources */
+ if ((intf_type == controller_ohare) && (cycleTime < 150))
+ cycleTime = 150;
+ /* Get the proper timing array for this controller */
+ switch(intf_type) {
+ case controller_sh_ata6:
+ case controller_un_ata6:
+ case controller_k2_ata6:
+ break;
+ case controller_kl_ata4:
+ tm = mdma_timings_66;
+ break;
+ case controller_kl_ata3:
+ tm = mdma_timings_33k;
+ break;
+ default:
+ tm = mdma_timings_33;
+ break;
+ }
+ if (tm != NULL) {
+ /* Lookup matching access & recovery times */
+ i = -1;
+ for (;;) {
+ if (tm[i+1].cycleTime < cycleTime)
+ break;
+ i++;
+ }
+ if (i < 0)
+ return 1;
+ cycleTime = tm[i].cycleTime;
+ accessTime = tm[i].accessTime;
+ recTime = tm[i].recoveryTime;
+
+#ifdef IDE_PMAC_DEBUG
+ printk(KERN_ERR "%s: MDMA, cycleTime: %d, accessTime: %d, recTime: %d\n",
+ drive->name, cycleTime, accessTime, recTime);
+#endif
+ }
+ switch(intf_type) {
+ case controller_sh_ata6: {
+ /* 133Mhz cell */
+ u32 tr = kauai_lookup_timing(shasta_mdma_timings, cycleTime);
+ if (tr == 0)
+ return 1;
+ *timings = ((*timings) & ~TR_133_PIOREG_MDMA_MASK) | tr;
+ *timings2 = (*timings2) & ~TR_133_UDMAREG_UDMA_EN;
+ }
+ case controller_un_ata6:
+ case controller_k2_ata6: {
+ /* 100Mhz cell */
+ u32 tr = kauai_lookup_timing(kauai_mdma_timings, cycleTime);
+ if (tr == 0)
+ return 1;
+ *timings = ((*timings) & ~TR_100_PIOREG_MDMA_MASK) | tr;
+ *timings2 = (*timings2) & ~TR_100_UDMAREG_UDMA_EN;
+ }
+ break;
+ case controller_kl_ata4:
+ /* 66Mhz cell */
+ accessTicks = SYSCLK_TICKS_66(accessTime);
+ accessTicks = min(accessTicks, 0x1fU);
+ accessTicks = max(accessTicks, 0x1U);
+ recTicks = SYSCLK_TICKS_66(recTime);
+ recTicks = min(recTicks, 0x1fU);
+ recTicks = max(recTicks, 0x3U);
+ /* Clear out mdma bits and disable udma */
+ *timings = ((*timings) & ~(TR_66_MDMA_MASK | TR_66_UDMA_MASK)) |
+ (accessTicks << TR_66_MDMA_ACCESS_SHIFT) |
+ (recTicks << TR_66_MDMA_RECOVERY_SHIFT);
+ break;
+ case controller_kl_ata3:
+ /* 33Mhz cell on KeyLargo */
+ accessTicks = SYSCLK_TICKS(accessTime);
+ accessTicks = max(accessTicks, 1U);
+ accessTicks = min(accessTicks, 0x1fU);
+ accessTime = accessTicks * IDE_SYSCLK_NS;
+ recTicks = SYSCLK_TICKS(recTime);
+ recTicks = max(recTicks, 1U);
+ recTicks = min(recTicks, 0x1fU);
+ *timings = ((*timings) & ~TR_33_MDMA_MASK) |
+ (accessTicks << TR_33_MDMA_ACCESS_SHIFT) |
+ (recTicks << TR_33_MDMA_RECOVERY_SHIFT);
+ break;
+ default: {
+ /* 33Mhz cell on others */
+ int halfTick = 0;
+ int origAccessTime = accessTime;
+ int origRecTime = recTime;
+
+ accessTicks = SYSCLK_TICKS(accessTime);
+ accessTicks = max(accessTicks, 1U);
+ accessTicks = min(accessTicks, 0x1fU);
+ accessTime = accessTicks * IDE_SYSCLK_NS;
+ recTicks = SYSCLK_TICKS(recTime);
+ recTicks = max(recTicks, 2U) - 1;
+ recTicks = min(recTicks, 0x1fU);
+ recTime = (recTicks + 1) * IDE_SYSCLK_NS;
+ if ((accessTicks > 1) &&
+ ((accessTime - IDE_SYSCLK_NS/2) >= origAccessTime) &&
+ ((recTime - IDE_SYSCLK_NS/2) >= origRecTime)) {
+ halfTick = 1;
+ accessTicks--;
+ }
+ *timings = ((*timings) & ~TR_33_MDMA_MASK) |
+ (accessTicks << TR_33_MDMA_ACCESS_SHIFT) |
+ (recTicks << TR_33_MDMA_RECOVERY_SHIFT);
+ if (halfTick)
+ *timings |= TR_33_MDMA_HALFTICK;
+ }
+ }
+#ifdef IDE_PMAC_DEBUG
+ printk(KERN_ERR "%s: Set MDMA timing for mode %d, reg: 0x%08x\n",
+ drive->name, speed & 0xf, *timings);
+#endif
+ return 0;
+}
+#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
+
+/*
+ * Speedproc. This function is called by the core to set any of the standard
+ * timing (PIO, MDMA or UDMA) to both the drive and the controller.
+ * You may notice we don't use this function on normal "dma check" operation,
+ * our dedicated function is more precise as it uses the drive provided
+ * cycle time value. We should probably fix this one to deal with that too...
+ */
+static int __pmac
+pmac_ide_tune_chipset (ide_drive_t *drive, byte speed)
+{
+ int unit = (drive->select.b.unit & 0x01);
+ int ret = 0;
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+ u32 *timings, *timings2;
+
+ if (pmif == NULL)
+ return 1;
+
+ timings = &pmif->timings[unit];
+ timings2 = &pmif->timings[unit+2];
+
+ switch(speed) {
+#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+ case XFER_UDMA_6:
+ if (pmif->kind != controller_sh_ata6)
+ return 1;
+ case XFER_UDMA_5:
+ if (pmif->kind != controller_un_ata6 &&
+ pmif->kind != controller_k2_ata6 &&
+ pmif->kind != controller_sh_ata6)
+ return 1;
+ case XFER_UDMA_4:
+ case XFER_UDMA_3:
+ if (HWIF(drive)->udma_four == 0)
+ return 1;
+ case XFER_UDMA_2:
+ case XFER_UDMA_1:
+ case XFER_UDMA_0:
+ if (pmif->kind == controller_kl_ata4)
+ ret = set_timings_udma_ata4(timings, speed);
+ else if (pmif->kind == controller_un_ata6
+ || pmif->kind == controller_k2_ata6)
+ ret = set_timings_udma_ata6(timings, timings2, speed);
+ else if (pmif->kind == controller_sh_ata6)
+ ret = set_timings_udma_shasta(timings, timings2, speed);
+ else
+ ret = 1;
+ break;
+ case XFER_MW_DMA_2:
+ case XFER_MW_DMA_1:
+ case XFER_MW_DMA_0:
+ ret = set_timings_mdma(drive, pmif->kind, timings, timings2, speed, 0);
+ break;
+ case XFER_SW_DMA_2:
+ case XFER_SW_DMA_1:
+ case XFER_SW_DMA_0:
+ return 1;
+#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ pmac_ide_tuneproc(drive, speed & 0x07);
+ break;
+ default:
+ ret = 1;
+ }
+ if (ret)
+ return ret;
+
+ ret = pmac_ide_do_setfeature(drive, speed);
+ if (ret)
+ return ret;
+
+ pmac_ide_do_update_timings(drive);
+ drive->current_speed = speed;
+
+ return 0;
+}
+
+/*
+ * Blast some well known "safe" values to the timing registers at init or
+ * wakeup from sleep time, before we do real calculation
+ */
+static void __pmac
+sanitize_timings(pmac_ide_hwif_t *pmif)
+{
+ unsigned int value, value2 = 0;
+
+ switch(pmif->kind) {
+ case controller_sh_ata6:
+ value = 0x0a820c97;
+ value2 = 0x00033031;
+ break;
+ case controller_un_ata6:
+ case controller_k2_ata6:
+ value = 0x08618a92;
+ value2 = 0x00002921;
+ break;
+ case controller_kl_ata4:
+ value = 0x0008438c;
+ break;
+ case controller_kl_ata3:
+ value = 0x00084526;
+ break;
+ case controller_heathrow:
+ case controller_ohare:
+ default:
+ value = 0x00074526;
+ break;
+ }
+ pmif->timings[0] = pmif->timings[1] = value;
+ pmif->timings[2] = pmif->timings[3] = value2;
+}
+
+unsigned long __pmac
+pmac_ide_get_base(int index)
+{
+ return pmac_ide[index].regbase;
+}
+
+int __pmac
+pmac_ide_check_base(unsigned long base)
+{
+ int ix;
+
+ for (ix = 0; ix < MAX_HWIFS; ++ix)
+ if (base == pmac_ide[ix].regbase)
+ return ix;
+ return -1;
+}
+
+int __pmac
+pmac_ide_get_irq(unsigned long base)
+{
+ int ix;
+
+ for (ix = 0; ix < MAX_HWIFS; ++ix)
+ if (base == pmac_ide[ix].regbase)
+ return pmac_ide[ix].irq;
+ return 0;
+}
+
+static int ide_majors[] __pmacdata = { 3, 22, 33, 34, 56, 57 };
+
+dev_t __init
+pmac_find_ide_boot(char *bootdevice, int n)
+{
+ int i;
+
+ /*
+ * Look through the list of IDE interfaces for this one.
+ */
+ for (i = 0; i < pmac_ide_count; ++i) {
+ char *name;
+ if (!pmac_ide[i].node || !pmac_ide[i].node->full_name)
+ continue;
+ name = pmac_ide[i].node->full_name;
+ if (memcmp(name, bootdevice, n) == 0 && name[n] == 0) {
+ /* XXX should cope with the 2nd drive as well... */
+ return MKDEV(ide_majors[i], 0);
+ }
+ }
+
+ return 0;
+}
+
+/* Suspend call back, should be called after the child devices
+ * have actually been suspended
+ */
+static int
+pmac_ide_do_suspend(ide_hwif_t *hwif)
+{
+ pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
+
+ /* We clear the timings */
+ pmif->timings[0] = 0;
+ pmif->timings[1] = 0;
+
+#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
+ /* Note: This code will be called for every hwif, thus we'll
+ * try several time to stop the LED blinker timer, but that
+ * should be harmless
+ */
+ if (pmu_ide_blink_enabled) {
+ unsigned long flags;
+
+ /* Make sure we don't hit the PMU blink */
+ spin_lock_irqsave(&pmu_blink_lock, flags);
+ if (pmu_blink_ledstate)
+ del_timer(&pmu_blink_timer);
+ pmu_blink_ledstate = 0;
+ spin_unlock_irqrestore(&pmu_blink_lock, flags);
+ }
+#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */
+
+ /* The media bay will handle itself just fine */
+ if (pmif->mediabay)
+ return 0;
+
+ /* Kauai has bus control FCRs directly here */
+ if (pmif->kauai_fcr) {
+ u32 fcr = readl(pmif->kauai_fcr);
+ fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE);
+ writel(fcr, pmif->kauai_fcr);
+ }
+
+ /* Disable the bus on older machines and the cell on kauai */
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id,
+ 0);
+
+ return 0;
+}
+
+/* Resume call back, should be called before the child devices
+ * are resumed
+ */
+static int
+pmac_ide_do_resume(ide_hwif_t *hwif)
+{
+ pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
+
+ /* Hard reset & re-enable controller (do we really need to reset ? -BenH) */
+ if (!pmif->mediabay) {
+ ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1);
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1);
+ msleep(10);
+ ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 0);
+ msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY));
+
+ /* Kauai has it different */
+ if (pmif->kauai_fcr) {
+ u32 fcr = readl(pmif->kauai_fcr);
+ fcr |= KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE;
+ writel(fcr, pmif->kauai_fcr);
+ }
+ }
+
+ /* Sanitize drive timings */
+ sanitize_timings(pmif);
+
+ return 0;
+}
+
+/*
+ * Setup, register & probe an IDE channel driven by this driver, this is
+ * called by one of the 2 probe functions (macio or PCI). Note that a channel
+ * that ends up beeing free of any device is not kept around by this driver
+ * (it is kept in 2.4). This introduce an interface numbering change on some
+ * rare machines unfortunately, but it's better this way.
+ */
+static int
+pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
+{
+ struct device_node *np = pmif->node;
+ int *bidp, i;
+
+ pmif->cable_80 = 0;
+ pmif->broken_dma = pmif->broken_dma_warn = 0;
+ if (device_is_compatible(np, "shasta-ata"))
+ pmif->kind = controller_sh_ata6;
+ else if (device_is_compatible(np, "kauai-ata"))
+ pmif->kind = controller_un_ata6;
+ else if (device_is_compatible(np, "K2-UATA"))
+ pmif->kind = controller_k2_ata6;
+ else if (device_is_compatible(np, "keylargo-ata")) {
+ if (strcmp(np->name, "ata-4") == 0)
+ pmif->kind = controller_kl_ata4;
+ else
+ pmif->kind = controller_kl_ata3;
+ } else if (device_is_compatible(np, "heathrow-ata"))
+ pmif->kind = controller_heathrow;
+ else {
+ pmif->kind = controller_ohare;
+ pmif->broken_dma = 1;
+ }
+
+ bidp = (int *)get_property(np, "AAPL,bus-id", NULL);
+ pmif->aapl_bus_id = bidp ? *bidp : 0;
+
+ /* Get cable type from device-tree */
+ if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6
+ || pmif->kind == controller_k2_ata6
+ || pmif->kind == controller_sh_ata6) {
+ char* cable = get_property(np, "cable-type", NULL);
+ if (cable && !strncmp(cable, "80-", 3))
+ pmif->cable_80 = 1;
+ }
+ /* G5's seem to have incorrect cable type in device-tree. Let's assume
+ * they have a 80 conductor cable, this seem to be always the case unless
+ * the user mucked around
+ */
+ if (device_is_compatible(np, "K2-UATA") ||
+ device_is_compatible(np, "shasta-ata"))
+ pmif->cable_80 = 1;
+
+ /* On Kauai-type controllers, we make sure the FCR is correct */
+ if (pmif->kauai_fcr)
+ writel(KAUAI_FCR_UATA_MAGIC |
+ KAUAI_FCR_UATA_RESET_N |
+ KAUAI_FCR_UATA_ENABLE, pmif->kauai_fcr);
+
+ pmif->mediabay = 0;
+
+ /* Make sure we have sane timings */
+ sanitize_timings(pmif);
+
+#ifndef CONFIG_PPC64
+ /* XXX FIXME: Media bay stuff need re-organizing */
+ if (np->parent && np->parent->name
+ && strcasecmp(np->parent->name, "media-bay") == 0) {
+#ifdef CONFIG_PMAC_PBOOK
+ media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq, hwif->index);
+#endif /* CONFIG_PMAC_PBOOK */
+ pmif->mediabay = 1;
+ if (!bidp)
+ pmif->aapl_bus_id = 1;
+ } else if (pmif->kind == controller_ohare) {
+ /* The code below is having trouble on some ohare machines
+ * (timing related ?). Until I can put my hand on one of these
+ * units, I keep the old way
+ */
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1);
+ } else
+#endif
+ {
+ /* This is necessary to enable IDE when net-booting */
+ ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1);
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1);
+ msleep(10);
+ ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 0);
+ msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY));
+ }
+
+ /* Setup MMIO ops */
+ default_hwif_mmiops(hwif);
+ hwif->OUTBSYNC = pmac_outbsync;
+
+ /* Tell common code _not_ to mess with resources */
+ hwif->mmio = 2;
+ hwif->hwif_data = pmif;
+ pmac_ide_init_hwif_ports(&hwif->hw, pmif->regbase, 0, &hwif->irq);
+ memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
+ hwif->chipset = ide_pmac;
+ hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET] || pmif->mediabay;
+ hwif->hold = pmif->mediabay;
+ hwif->udma_four = pmif->cable_80;
+ hwif->drives[0].unmask = 1;
+ hwif->drives[1].unmask = 1;
+ hwif->tuneproc = pmac_ide_tuneproc;
+ if (pmif->kind == controller_un_ata6
+ || pmif->kind == controller_k2_ata6
+ || pmif->kind == controller_sh_ata6)
+ hwif->selectproc = pmac_ide_kauai_selectproc;
+ else
+ hwif->selectproc = pmac_ide_selectproc;
+ hwif->speedproc = pmac_ide_tune_chipset;
+
+#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
+ pmu_ide_blink_enabled = pmu_hd_blink_init();
+
+ if (pmu_ide_blink_enabled)
+ hwif->led_act = pmu_hd_kick_blink;
+#endif
+
+ printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
+ hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
+ pmif->mediabay ? " (mediabay)" : "", hwif->irq);
+
+#ifdef CONFIG_PMAC_PBOOK
+ if (pmif->mediabay && check_media_bay_by_base(pmif->regbase, MB_CD) == 0)
+ hwif->noprobe = 0;
+#endif /* CONFIG_PMAC_PBOOK */
+
+ hwif->sg_max_nents = MAX_DCMDS;
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+ /* has a DBDMA controller channel */
+ if (pmif->dma_regs)
+ pmac_ide_setup_dma(pmif, hwif);
+#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
+ /* We probe the hwif now */
+ probe_hwif_init(hwif);
+
+ /* The code IDE code will have set hwif->present if we have devices attached,
+ * if we don't, the discard the interface except if we are on a media bay slot
+ */
+ if (!hwif->present && !pmif->mediabay) {
+ printk(KERN_INFO "ide%d: Bus empty, interface released.\n",
+ hwif->index);
+ default_hwif_iops(hwif);
+ for (i = IDE_DATA_OFFSET; i <= IDE_CONTROL_OFFSET; ++i)
+ hwif->io_ports[i] = 0;
+ hwif->chipset = ide_unknown;
+ hwif->noprobe = 1;
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/*
+ * Attach to a macio probed interface
+ */
+static int __devinit
+pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_match *match)
+{
+ void __iomem *base;
+ unsigned long regbase;
+ int irq;
+ ide_hwif_t *hwif;
+ pmac_ide_hwif_t *pmif;
+ int i, rc;
+
+ i = 0;
+ while (i < MAX_HWIFS && (ide_hwifs[i].io_ports[IDE_DATA_OFFSET] != 0
+ || pmac_ide[i].node != NULL))
+ ++i;
+ if (i >= MAX_HWIFS) {
+ printk(KERN_ERR "ide-pmac: MacIO interface attach with no slot\n");
+ printk(KERN_ERR " %s\n", mdev->ofdev.node->full_name);
+ return -ENODEV;
+ }
+
+ pmif = &pmac_ide[i];
+ hwif = &ide_hwifs[i];
+
+ if (mdev->ofdev.node->n_addrs == 0) {
+ printk(KERN_WARNING "ide%d: no address for %s\n",
+ i, mdev->ofdev.node->full_name);
+ return -ENXIO;
+ }
+
+ /* Request memory resource for IO ports */
+ if (macio_request_resource(mdev, 0, "ide-pmac (ports)")) {
+ printk(KERN_ERR "ide%d: can't request mmio resource !\n", i);
+ return -EBUSY;
+ }
+
+ /* XXX This is bogus. Should be fixed in the registry by checking
+ * the kind of host interrupt controller, a bit like gatwick
+ * fixes in irq.c. That works well enough for the single case
+ * where that happens though...
+ */
+ if (macio_irq_count(mdev) == 0) {
+ printk(KERN_WARNING "ide%d: no intrs for device %s, using 13\n",
+ i, mdev->ofdev.node->full_name);
+ irq = 13;
+ } else
+ irq = macio_irq(mdev, 0);
+
+ base = ioremap(macio_resource_start(mdev, 0), 0x400);
+ regbase = (unsigned long) base;
+
+ hwif->pci_dev = mdev->bus->pdev;
+ hwif->gendev.parent = &mdev->ofdev.dev;
+
+ pmif->mdev = mdev;
+ pmif->node = mdev->ofdev.node;
+ pmif->regbase = regbase;
+ pmif->irq = irq;
+ pmif->kauai_fcr = NULL;
+#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+ if (macio_resource_count(mdev) >= 2) {
+ if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
+ printk(KERN_WARNING "ide%d: can't request DMA resource !\n", i);
+ else
+ pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
+ } else
+ pmif->dma_regs = NULL;
+#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+ dev_set_drvdata(&mdev->ofdev.dev, hwif);
+
+ rc = pmac_ide_setup_device(pmif, hwif);
+ if (rc != 0) {
+ /* The inteface is released to the common IDE layer */
+ dev_set_drvdata(&mdev->ofdev.dev, NULL);
+ iounmap(base);
+ if (pmif->dma_regs)
+ iounmap(pmif->dma_regs);
+ memset(pmif, 0, sizeof(*pmif));
+ macio_release_resource(mdev, 0);
+ if (pmif->dma_regs)
+ macio_release_resource(mdev, 1);
+ }
+
+ return rc;
+}
+
+static int
+pmac_ide_macio_suspend(struct macio_dev *mdev, u32 state)
+{
+ ide_hwif_t *hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
+ int rc = 0;
+
+ if (state != mdev->ofdev.dev.power.power_state && state >= 2) {
+ rc = pmac_ide_do_suspend(hwif);
+ if (rc == 0)
+ mdev->ofdev.dev.power.power_state = state;
+ }
+
+ return rc;
+}
+
+static int
+pmac_ide_macio_resume(struct macio_dev *mdev)
+{
+ ide_hwif_t *hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
+ int rc = 0;
+
+ if (mdev->ofdev.dev.power.power_state != 0) {
+ rc = pmac_ide_do_resume(hwif);
+ if (rc == 0)
+ mdev->ofdev.dev.power.power_state = 0;
+ }
+
+ return rc;
+}
+
+/*
+ * Attach to a PCI probed interface
+ */
+static int __devinit
+pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ ide_hwif_t *hwif;
+ struct device_node *np;
+ pmac_ide_hwif_t *pmif;
+ void __iomem *base;
+ unsigned long rbase, rlen;
+ int i, rc;
+
+ np = pci_device_to_OF_node(pdev);
+ if (np == NULL) {
+ printk(KERN_ERR "ide-pmac: cannot find MacIO node for Kauai ATA interface\n");
+ return -ENODEV;
+ }
+ i = 0;
+ while (i < MAX_HWIFS && (ide_hwifs[i].io_ports[IDE_DATA_OFFSET] != 0
+ || pmac_ide[i].node != NULL))
+ ++i;
+ if (i >= MAX_HWIFS) {
+ printk(KERN_ERR "ide-pmac: PCI interface attach with no slot\n");
+ printk(KERN_ERR " %s\n", np->full_name);
+ return -ENODEV;
+ }
+
+ pmif = &pmac_ide[i];
+ hwif = &ide_hwifs[i];
+
+ if (pci_enable_device(pdev)) {
+ printk(KERN_WARNING "ide%i: Can't enable PCI device for %s\n",
+ i, np->full_name);
+ return -ENXIO;
+ }
+ pci_set_master(pdev);
+
+ if (pci_request_regions(pdev, "Kauai ATA")) {
+ printk(KERN_ERR "ide%d: Cannot obtain PCI resources for %s\n",
+ i, np->full_name);
+ return -ENXIO;
+ }
+
+ hwif->pci_dev = pdev;
+ hwif->gendev.parent = &pdev->dev;
+ pmif->mdev = NULL;
+ pmif->node = np;
+
+ rbase = pci_resource_start(pdev, 0);
+ rlen = pci_resource_len(pdev, 0);
+
+ base = ioremap(rbase, rlen);
+ pmif->regbase = (unsigned long) base + 0x2000;
+#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+ pmif->dma_regs = base + 0x1000;
+#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+ pmif->kauai_fcr = base;
+ pmif->irq = pdev->irq;
+
+ pci_set_drvdata(pdev, hwif);
+
+ rc = pmac_ide_setup_device(pmif, hwif);
+ if (rc != 0) {
+ /* The inteface is released to the common IDE layer */
+ pci_set_drvdata(pdev, NULL);
+ iounmap(base);
+ memset(pmif, 0, sizeof(*pmif));
+ pci_release_regions(pdev);
+ }
+
+ return rc;
+}
+
+static int
+pmac_ide_pci_suspend(struct pci_dev *pdev, u32 state)
+{
+ ide_hwif_t *hwif = (ide_hwif_t *)pci_get_drvdata(pdev);
+ int rc = 0;
+
+ if (state != pdev->dev.power.power_state && state >= 2) {
+ rc = pmac_ide_do_suspend(hwif);
+ if (rc == 0)
+ pdev->dev.power.power_state = state;
+ }
+
+ return rc;
+}
+
+static int
+pmac_ide_pci_resume(struct pci_dev *pdev)
+{
+ ide_hwif_t *hwif = (ide_hwif_t *)pci_get_drvdata(pdev);
+ int rc = 0;
+
+ if (pdev->dev.power.power_state != 0) {
+ rc = pmac_ide_do_resume(hwif);
+ if (rc == 0)
+ pdev->dev.power.power_state = 0;
+ }
+
+ return rc;
+}
+
+static struct of_match pmac_ide_macio_match[] =
+{
+ {
+ .name = "IDE",
+ .type = OF_ANY_MATCH,
+ .compatible = OF_ANY_MATCH
+ },
+ {
+ .name = "ATA",
+ .type = OF_ANY_MATCH,
+ .compatible = OF_ANY_MATCH
+ },
+ {
+ .name = OF_ANY_MATCH,
+ .type = "ide",
+ .compatible = OF_ANY_MATCH
+ },
+ {
+ .name = OF_ANY_MATCH,
+ .type = "ata",
+ .compatible = OF_ANY_MATCH
+ },
+ {},
+};
+
+static struct macio_driver pmac_ide_macio_driver =
+{
+ .name = "ide-pmac",
+ .match_table = pmac_ide_macio_match,
+ .probe = pmac_ide_macio_attach,
+ .suspend = pmac_ide_macio_suspend,
+ .resume = pmac_ide_macio_resume,
+};
+
+static struct pci_device_id pmac_ide_pci_match[] = {
+ { PCI_VENDOR_ID_APPLE, PCI_DEVIEC_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+};
+
+static struct pci_driver pmac_ide_pci_driver = {
+ .name = "ide-pmac",
+ .id_table = pmac_ide_pci_match,
+ .probe = pmac_ide_pci_attach,
+ .suspend = pmac_ide_pci_suspend,
+ .resume = pmac_ide_pci_resume,
+};
+MODULE_DEVICE_TABLE(pci, pmac_ide_pci_match);
+
+void __init
+pmac_ide_probe(void)
+{
+ if (_machine != _MACH_Pmac)
+ return;
+
+#ifdef CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST
+ pci_register_driver(&pmac_ide_pci_driver);
+ macio_register_driver(&pmac_ide_macio_driver);
+#else
+ macio_register_driver(&pmac_ide_macio_driver);
+ pci_register_driver(&pmac_ide_pci_driver);
+#endif
+}
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+
+/*
+ * pmac_ide_build_dmatable builds the DBDMA command list
+ * for a transfer and sets the DBDMA channel to point to it.
+ */
+static int __pmac
+pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq)
+{
+ struct dbdma_cmd *table;
+ int i, count = 0;
+ ide_hwif_t *hwif = HWIF(drive);
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
+ volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
+ struct scatterlist *sg;
+ int wr = (rq_data_dir(rq) == WRITE);
+
+ /* DMA table is already aligned */
+ table = (struct dbdma_cmd *) pmif->dma_table_cpu;
+
+ /* Make sure DMA controller is stopped (necessary ?) */
+ writel((RUN|PAUSE|FLUSH|WAKE|DEAD) << 16, &dma->control);
+ while (readl(&dma->status) & RUN)
+ udelay(1);
+
+ hwif->sg_nents = i = ide_build_sglist(drive, rq);
+
+ if (!i)
+ return 0;
+
+ /* Build DBDMA commands list */
+ sg = hwif->sg_table;
+ while (i && sg_dma_len(sg)) {
+ u32 cur_addr;
+ u32 cur_len;
+
+ cur_addr = sg_dma_address(sg);
+ cur_len = sg_dma_len(sg);
+
+ if (pmif->broken_dma && cur_addr & (L1_CACHE_BYTES - 1)) {
+ if (pmif->broken_dma_warn == 0) {
+ printk(KERN_WARNING "%s: DMA on non aligned address,"
+ "switching to PIO on Ohare chipset\n", drive->name);
+ pmif->broken_dma_warn = 1;
+ }
+ goto use_pio_instead;
+ }
+ while (cur_len) {
+ unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;
+
+ if (count++ >= MAX_DCMDS) {
+ printk(KERN_WARNING "%s: DMA table too small\n",
+ drive->name);
+ goto use_pio_instead;
+ }
+ st_le16(&table->command, wr? OUTPUT_MORE: INPUT_MORE);
+ st_le16(&table->req_count, tc);
+ st_le32(&table->phy_addr, cur_addr);
+ table->cmd_dep = 0;
+ table->xfer_status = 0;
+ table->res_count = 0;
+ cur_addr += tc;
+ cur_len -= tc;
+ ++table;
+ }
+ sg++;
+ i--;
+ }
+
+ /* convert the last command to an input/output last command */
+ if (count) {
+ st_le16(&table[-1].command, wr? OUTPUT_LAST: INPUT_LAST);
+ /* add the stop command to the end of the list */
+ memset(table, 0, sizeof(struct dbdma_cmd));
+ st_le16(&table->command, DBDMA_STOP);
+ mb();
+ writel(hwif->dmatable_dma, &dma->cmdptr);
+ return 1;
+ }
+
+ printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name);
+ use_pio_instead:
+ pci_unmap_sg(hwif->pci_dev,
+ hwif->sg_table,
+ hwif->sg_nents,
+ hwif->sg_dma_direction);
+ return 0; /* revert to PIO for this request */
+}
+
+/* Teardown mappings after DMA has completed. */
+static void __pmac
+pmac_ide_destroy_dmatable (ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct scatterlist *sg = hwif->sg_table;
+ int nents = hwif->sg_nents;
+
+ if (nents) {
+ pci_unmap_sg(dev, sg, nents, hwif->sg_dma_direction);
+ hwif->sg_nents = 0;
+ }
+}
+
+/*
+ * Pick up best MDMA timing for the drive and apply it
+ */
+static int __pmac
+pmac_ide_mdma_enable(ide_drive_t *drive, u16 mode)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
+ int drive_cycle_time;
+ struct hd_driveid *id = drive->id;
+ u32 *timings, *timings2;
+ u32 timing_local[2];
+ int ret;
+
+ /* which drive is it ? */
+ timings = &pmif->timings[drive->select.b.unit & 0x01];
+ timings2 = &pmif->timings[(drive->select.b.unit & 0x01) + 2];
+
+ /* Check if drive provide explicit cycle time */
+ if ((id->field_valid & 2) && (id->eide_dma_time))
+ drive_cycle_time = id->eide_dma_time;
+ else
+ drive_cycle_time = 0;
+
+ /* Copy timings to local image */
+ timing_local[0] = *timings;
+ timing_local[1] = *timings2;
+
+ /* Calculate controller timings */
+ ret = set_timings_mdma( drive, pmif->kind,
+ &timing_local[0],
+ &timing_local[1],
+ mode,
+ drive_cycle_time);
+ if (ret)
+ return 0;
+
+ /* Set feature on drive */
+ printk(KERN_INFO "%s: Enabling MultiWord DMA %d\n", drive->name, mode & 0xf);
+ ret = pmac_ide_do_setfeature(drive, mode);
+ if (ret) {
+ printk(KERN_WARNING "%s: Failed !\n", drive->name);
+ return 0;
+ }
+
+ /* Apply timings to controller */
+ *timings = timing_local[0];
+ *timings2 = timing_local[1];
+
+ /* Set speed info in drive */
+ drive->current_speed = mode;
+ if (!drive->init_speed)
+ drive->init_speed = mode;
+
+ return 1;
+}
+
+/*
+ * Pick up best UDMA timing for the drive and apply it
+ */
+static int __pmac
+pmac_ide_udma_enable(ide_drive_t *drive, u16 mode)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
+ u32 *timings, *timings2;
+ u32 timing_local[2];
+ int ret;
+
+ /* which drive is it ? */
+ timings = &pmif->timings[drive->select.b.unit & 0x01];
+ timings2 = &pmif->timings[(drive->select.b.unit & 0x01) + 2];
+
+ /* Copy timings to local image */
+ timing_local[0] = *timings;
+ timing_local[1] = *timings2;
+
+ /* Calculate timings for interface */
+ if (pmif->kind == controller_un_ata6
+ || pmif->kind == controller_k2_ata6)
+ ret = set_timings_udma_ata6( &timing_local[0],
+ &timing_local[1],
+ mode);
+ else if (pmif->kind == controller_sh_ata6)
+ ret = set_timings_udma_shasta( &timing_local[0],
+ &timing_local[1],
+ mode);
+ else
+ ret = set_timings_udma_ata4(&timing_local[0], mode);
+ if (ret)
+ return 0;
+
+ /* Set feature on drive */
+ printk(KERN_INFO "%s: Enabling Ultra DMA %d\n", drive->name, mode & 0x0f);
+ ret = pmac_ide_do_setfeature(drive, mode);
+ if (ret) {
+ printk(KERN_WARNING "%s: Failed !\n", drive->name);
+ return 0;
+ }
+
+ /* Apply timings to controller */
+ *timings = timing_local[0];
+ *timings2 = timing_local[1];
+
+ /* Set speed info in drive */
+ drive->current_speed = mode;
+ if (!drive->init_speed)
+ drive->init_speed = mode;
+
+ return 1;
+}
+
+/*
+ * Check what is the best DMA timing setting for the drive and
+ * call appropriate functions to apply it.
+ */
+static int __pmac
+pmac_ide_dma_check(ide_drive_t *drive)
+{
+ struct hd_driveid *id = drive->id;
+ ide_hwif_t *hwif = HWIF(drive);
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
+ int enable = 1;
+ int map;
+ drive->using_dma = 0;
+
+ if (drive->media == ide_floppy)
+ enable = 0;
+ if (((id->capability & 1) == 0) && !__ide_dma_good_drive(drive))
+ enable = 0;
+ if (__ide_dma_bad_drive(drive))
+ enable = 0;
+
+ if (enable) {
+ short mode;
+
+ map = XFER_MWDMA;
+ if (pmif->kind == controller_kl_ata4
+ || pmif->kind == controller_un_ata6
+ || pmif->kind == controller_k2_ata6
+ || pmif->kind == controller_sh_ata6) {
+ map |= XFER_UDMA;
+ if (pmif->cable_80) {
+ map |= XFER_UDMA_66;
+ if (pmif->kind == controller_un_ata6 ||
+ pmif->kind == controller_k2_ata6 ||
+ pmif->kind == controller_sh_ata6)
+ map |= XFER_UDMA_100;
+ if (pmif->kind == controller_sh_ata6)
+ map |= XFER_UDMA_133;
+ }
+ }
+ mode = ide_find_best_mode(drive, map);
+ if (mode & XFER_UDMA)
+ drive->using_dma = pmac_ide_udma_enable(drive, mode);
+ else if (mode & XFER_MWDMA)
+ drive->using_dma = pmac_ide_mdma_enable(drive, mode);
+ hwif->OUTB(0, IDE_CONTROL_REG);
+ /* Apply settings to controller */
+ pmac_ide_do_update_timings(drive);
+ }
+ return 0;
+}
+
+/*
+ * Prepare a DMA transfer. We build the DMA table, adjust the timings for
+ * a read on KeyLargo ATA/66 and mark us as waiting for DMA completion
+ */
+static int __pmac
+pmac_ide_dma_setup(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
+ struct request *rq = HWGROUP(drive)->rq;
+ u8 unit = (drive->select.b.unit & 0x01);
+ u8 ata4;
+
+ if (pmif == NULL)
+ return 1;
+ ata4 = (pmif->kind == controller_kl_ata4);
+
+ if (!pmac_ide_build_dmatable(drive, rq)) {
+ ide_map_sg(drive, rq);
+ return 1;
+ }
+
+ /* Apple adds 60ns to wrDataSetup on reads */
+ if (ata4 && (pmif->timings[unit] & TR_66_UDMA_EN)) {
+ writel(pmif->timings[unit] + (!rq_data_dir(rq) ? 0x00800000UL : 0),
+ PMAC_IDE_REG(IDE_TIMING_CONFIG));
+ (void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG));
+ }
+
+ drive->waiting_for_dma = 1;
+
+ return 0;
+}
+
+static void __pmac
+pmac_ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
+{
+ /* issue cmd to drive */
+ ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, NULL);
+}
+
+/*
+ * Kick the DMA controller into life after the DMA command has been issued
+ * to the drive.
+ */
+static void __pmac
+pmac_ide_dma_start(ide_drive_t *drive)
+{
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+ volatile struct dbdma_regs __iomem *dma;
+
+ dma = pmif->dma_regs;
+
+ writel((RUN << 16) | RUN, &dma->control);
+ /* Make sure it gets to the controller right now */
+ (void)readl(&dma->control);
+}
+
+/*
+ * After a DMA transfer, make sure the controller is stopped
+ */
+static int __pmac
+pmac_ide_dma_end (ide_drive_t *drive)
+{
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+ volatile struct dbdma_regs __iomem *dma;
+ u32 dstat;
+
+ if (pmif == NULL)
+ return 0;
+ dma = pmif->dma_regs;
+
+ drive->waiting_for_dma = 0;
+ dstat = readl(&dma->status);
+ writel(((RUN|WAKE|DEAD) << 16), &dma->control);
+ pmac_ide_destroy_dmatable(drive);
+ /* verify good dma status. we don't check for ACTIVE beeing 0. We should...
+ * in theory, but with ATAPI decices doing buffer underruns, that would
+ * cause us to disable DMA, which isn't what we want
+ */
+ return (dstat & (RUN|DEAD)) != RUN;
+}
+
+/*
+ * Check out that the interrupt we got was for us. We can't always know this
+ * for sure with those Apple interfaces (well, we could on the recent ones but
+ * that's not implemented yet), on the other hand, we don't have shared interrupts
+ * so it's not really a problem
+ */
+static int __pmac
+pmac_ide_dma_test_irq (ide_drive_t *drive)
+{
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+ volatile struct dbdma_regs __iomem *dma;
+ unsigned long status, timeout;
+
+ if (pmif == NULL)
+ return 0;
+ dma = pmif->dma_regs;
+
+ /* We have to things to deal with here:
+ *
+ * - The dbdma won't stop if the command was started
+ * but completed with an error without transferring all
+ * datas. This happens when bad blocks are met during
+ * a multi-block transfer.
+ *
+ * - The dbdma fifo hasn't yet finished flushing to
+ * to system memory when the disk interrupt occurs.
+ *
+ */
+
+ /* If ACTIVE is cleared, the STOP command have passed and
+ * transfer is complete.
+ */
+ status = readl(&dma->status);
+ if (!(status & ACTIVE))
+ return 1;
+ if (!drive->waiting_for_dma)
+ printk(KERN_WARNING "ide%d, ide_dma_test_irq \
+ called while not waiting\n", HWIF(drive)->index);
+
+ /* If dbdma didn't execute the STOP command yet, the
+ * active bit is still set. We consider that we aren't
+ * sharing interrupts (which is hopefully the case with
+ * those controllers) and so we just try to flush the
+ * channel for pending data in the fifo
+ */
+ udelay(1);
+ writel((FLUSH << 16) | FLUSH, &dma->control);
+ timeout = 0;
+ for (;;) {
+ udelay(1);
+ status = readl(&dma->status);
+ if ((status & FLUSH) == 0)
+ break;
+ if (++timeout > 100) {
+ printk(KERN_WARNING "ide%d, ide_dma_test_irq \
+ timeout flushing channel\n", HWIF(drive)->index);
+ break;
+ }
+ }
+ return 1;
+}
+
+static int __pmac
+pmac_ide_dma_host_off (ide_drive_t *drive)
+{
+ return 0;
+}
+
+static int __pmac
+pmac_ide_dma_host_on (ide_drive_t *drive)
+{
+ return 0;
+}
+
+static int __pmac
+pmac_ide_dma_lostirq (ide_drive_t *drive)
+{
+ pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+ volatile struct dbdma_regs __iomem *dma;
+ unsigned long status;
+
+ if (pmif == NULL)
+ return 0;
+ dma = pmif->dma_regs;
+
+ status = readl(&dma->status);
+ printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status);
+ return 0;
+}
+
+/*
+ * Allocate the data structures needed for using DMA with an interface
+ * and fill the proper list of functions pointers
+ */
+static void __init
+pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
+{
+ /* We won't need pci_dev if we switch to generic consistent
+ * DMA routines ...
+ */
+ if (hwif->pci_dev == NULL)
+ return;
+ /*
+ * Allocate space for the DBDMA commands.
+ * The +2 is +1 for the stop command and +1 to allow for
+ * aligning the start address to a multiple of 16 bytes.
+ */
+ pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent(
+ hwif->pci_dev,
+ (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
+ &hwif->dmatable_dma);
+ if (pmif->dma_table_cpu == NULL) {
+ printk(KERN_ERR "%s: unable to allocate DMA command list\n",
+ hwif->name);
+ return;
+ }
+
+ hwif->ide_dma_off_quietly = &__ide_dma_off_quietly;
+ hwif->ide_dma_on = &__ide_dma_on;
+ hwif->ide_dma_check = &pmac_ide_dma_check;
+ hwif->dma_setup = &pmac_ide_dma_setup;
+ hwif->dma_exec_cmd = &pmac_ide_dma_exec_cmd;
+ hwif->dma_start = &pmac_ide_dma_start;
+ hwif->ide_dma_end = &pmac_ide_dma_end;
+ hwif->ide_dma_test_irq = &pmac_ide_dma_test_irq;
+ hwif->ide_dma_host_off = &pmac_ide_dma_host_off;
+ hwif->ide_dma_host_on = &pmac_ide_dma_host_on;
+ hwif->ide_dma_timeout = &__ide_dma_timeout;
+ hwif->ide_dma_lostirq = &pmac_ide_dma_lostirq;
+
+ hwif->atapi_dma = 1;
+ switch(pmif->kind) {
+ case controller_sh_ata6:
+ hwif->ultra_mask = pmif->cable_80 ? 0x7f : 0x07;
+ hwif->mwdma_mask = 0x07;
+ hwif->swdma_mask = 0x00;
+ break;
+ case controller_un_ata6:
+ case controller_k2_ata6:
+ hwif->ultra_mask = pmif->cable_80 ? 0x3f : 0x07;
+ hwif->mwdma_mask = 0x07;
+ hwif->swdma_mask = 0x00;
+ break;
+ case controller_kl_ata4:
+ hwif->ultra_mask = pmif->cable_80 ? 0x1f : 0x07;
+ hwif->mwdma_mask = 0x07;
+ hwif->swdma_mask = 0x00;
+ break;
+ default:
+ hwif->ultra_mask = 0x00;
+ hwif->mwdma_mask = 0x07;
+ hwif->swdma_mask = 0x00;
+ break;
+ }
+}
+
+#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
OpenPOWER on IntegriCloud