diff options
| author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
| commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
| tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/ide/pci | |
| download | op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz | |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/ide/pci')
30 files changed, 16707 insertions, 0 deletions
diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile new file mode 100644 index 0000000..55e6e55 --- /dev/null +++ b/drivers/ide/pci/Makefile @@ -0,0 +1,34 @@ + +obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o +obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o +obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o +obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o +obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o +obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o +obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o +obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o +obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o +obj-$(CONFIG_BLK_DEV_HPT34X) += hpt34x.o +obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o +#obj-$(CONFIG_BLK_DEV_HPT37X) += hpt37x.o +obj-$(CONFIG_BLK_DEV_IT8172) += it8172.o +obj-$(CONFIG_BLK_DEV_NS87415) += ns87415.o +obj-$(CONFIG_BLK_DEV_OPTI621) += opti621.o +obj-$(CONFIG_BLK_DEV_PDC202XX_OLD) += pdc202xx_old.o +obj-$(CONFIG_BLK_DEV_PDC202XX_NEW) += pdc202xx_new.o +obj-$(CONFIG_BLK_DEV_PIIX) += piix.o +obj-$(CONFIG_BLK_DEV_RZ1000) += rz1000.o +obj-$(CONFIG_BLK_DEV_SVWKS) += serverworks.o +obj-$(CONFIG_BLK_DEV_SGIIOC4) += sgiioc4.o +obj-$(CONFIG_BLK_DEV_SIIMAGE) += siimage.o +obj-$(CONFIG_BLK_DEV_SIS5513) += sis5513.o +obj-$(CONFIG_BLK_DEV_SL82C105) += sl82c105.o +obj-$(CONFIG_BLK_DEV_SLC90E66) += slc90e66.o +obj-$(CONFIG_BLK_DEV_TRIFLEX) += triflex.o +obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o +obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o + +# Must appear at the end of the block +obj-$(CONFIG_BLK_DEV_GENERIC) += generic.o + +EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c new file mode 100644 index 0000000..52cadc0 --- /dev/null +++ b/drivers/ide/pci/aec62xx.c @@ -0,0 +1,485 @@ +/* + * linux/drivers/ide/pci/aec62xx.c Version 0.11 March 27, 2002 + * + * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> + * + */ + +#include <linux/module.h> +#include <linux/config.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/init.h> + +#include <asm/io.h> + +struct chipset_bus_clock_list_entry { + u8 xfer_speed; + u8 chipset_settings; + u8 ultra_settings; +}; + +static struct chipset_bus_clock_list_entry aec6xxx_33_base [] = { + { XFER_UDMA_6, 0x31, 0x07 }, + { XFER_UDMA_5, 0x31, 0x06 }, + { XFER_UDMA_4, 0x31, 0x05 }, + { XFER_UDMA_3, 0x31, 0x04 }, + { XFER_UDMA_2, 0x31, 0x03 }, + { XFER_UDMA_1, 0x31, 0x02 }, + { XFER_UDMA_0, 0x31, 0x01 }, + + { XFER_MW_DMA_2, 0x31, 0x00 }, + { XFER_MW_DMA_1, 0x31, 0x00 }, + { XFER_MW_DMA_0, 0x0a, 0x00 }, + { XFER_PIO_4, 0x31, 0x00 }, + { XFER_PIO_3, 0x33, 0x00 }, + { XFER_PIO_2, 0x08, 0x00 }, + { XFER_PIO_1, 0x0a, 0x00 }, + { XFER_PIO_0, 0x00, 0x00 }, + { 0, 0x00, 0x00 } +}; + +static struct chipset_bus_clock_list_entry aec6xxx_34_base [] = { + { XFER_UDMA_6, 0x41, 0x06 }, + { XFER_UDMA_5, 0x41, 0x05 }, + { XFER_UDMA_4, 0x41, 0x04 }, + { XFER_UDMA_3, 0x41, 0x03 }, + { XFER_UDMA_2, 0x41, 0x02 }, + { XFER_UDMA_1, 0x41, 0x01 }, + { XFER_UDMA_0, 0x41, 0x01 }, + + { XFER_MW_DMA_2, 0x41, 0x00 }, + { XFER_MW_DMA_1, 0x42, 0x00 }, + { XFER_MW_DMA_0, 0x7a, 0x00 }, + { XFER_PIO_4, 0x41, 0x00 }, + { XFER_PIO_3, 0x43, 0x00 }, + { XFER_PIO_2, 0x78, 0x00 }, + { XFER_PIO_1, 0x7a, 0x00 }, + { XFER_PIO_0, 0x70, 0x00 }, + { 0, 0x00, 0x00 } +}; + +#define BUSCLOCK(D) \ + ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D))) + +#if 0 + if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { + (void) pci_read_config_byte(dev, 0x54, &art); + p += sprintf(p, "DMA Mode: %s(%s)", + (c0&0x20)?((art&0x03)?"UDMA":" DMA"):" PIO", + (art&0x02)?"2":(art&0x01)?"1":"0"); + p += sprintf(p, " %s(%s)", + (c0&0x40)?((art&0x0c)?"UDMA":" DMA"):" PIO", + (art&0x08)?"2":(art&0x04)?"1":"0"); + p += sprintf(p, " %s(%s)", + (c1&0x20)?((art&0x30)?"UDMA":" DMA"):" PIO", + (art&0x20)?"2":(art&0x10)?"1":"0"); + p += sprintf(p, " %s(%s)\n", + (c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO", + (art&0x80)?"2":(art&0x40)?"1":"0"); + } else { +#endif + +/* + * TO DO: active tuning and correction of cards without a bios. + */ +static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table) +{ + for ( ; chipset_table->xfer_speed ; chipset_table++) + if (chipset_table->xfer_speed == speed) { + return chipset_table->chipset_settings; + } + return chipset_table->chipset_settings; +} + +static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table) +{ + for ( ; chipset_table->xfer_speed ; chipset_table++) + if (chipset_table->xfer_speed == speed) { + return chipset_table->ultra_settings; + } + return chipset_table->ultra_settings; +} + +static u8 aec62xx_ratemask (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 mode; + + switch(hwif->pci_dev->device) { + case PCI_DEVICE_ID_ARTOP_ATP865: + case PCI_DEVICE_ID_ARTOP_ATP865R: +#if 0 + mode = (hwif->INB(hwif->dma_master) & 0x10) ? 4 : 3; +#else + mode = (hwif->INB(((hwif->channel) ? + hwif->mate->dma_status : + hwif->dma_status)) & 0x10) ? 4 : 3; +#endif + break; + case PCI_DEVICE_ID_ARTOP_ATP860: + case PCI_DEVICE_ID_ARTOP_ATP860R: + mode = 2; + break; + case PCI_DEVICE_ID_ARTOP_ATP850UF: + default: + return 1; + } + + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + return mode; +} + +static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u16 d_conf = 0; + u8 speed = ide_rate_filter(aec62xx_ratemask(drive), xferspeed); + u8 ultra = 0, ultra_conf = 0; + u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; + unsigned long flags; + + local_irq_save(flags); + /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */ + pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf); + tmp0 = pci_bus_clock_list(speed, BUSCLOCK(dev)); + d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf); + pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf); + + tmp1 = 0x00; + tmp2 = 0x00; + pci_read_config_byte(dev, 0x54, &ultra); + tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn)))); + ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev)); + tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn)))); + pci_write_config_byte(dev, 0x54, tmp2); + local_irq_restore(flags); + return(ide_config_drive_speed(drive, speed)); +} + +static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 speed = ide_rate_filter(aec62xx_ratemask(drive), xferspeed); + u8 unit = (drive->select.b.unit & 0x01); + u8 tmp1 = 0, tmp2 = 0; + u8 ultra = 0, drive_conf = 0, ultra_conf = 0; + unsigned long flags; + + local_irq_save(flags); + /* high 4-bits: Active, low 4-bits: Recovery */ + pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf); + drive_conf = pci_bus_clock_list(speed, BUSCLOCK(dev)); + pci_write_config_byte(dev, 0x40|drive->dn, drive_conf); + + pci_read_config_byte(dev, (0x44|hwif->channel), &ultra); + tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit)))); + ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev)); + tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit)))); + pci_write_config_byte(dev, (0x44|hwif->channel), tmp2); + local_irq_restore(flags); + return(ide_config_drive_speed(drive, speed)); +} + +static int aec62xx_tune_chipset (ide_drive_t *drive, u8 speed) +{ + switch (HWIF(drive)->pci_dev->device) { + case PCI_DEVICE_ID_ARTOP_ATP865: + case PCI_DEVICE_ID_ARTOP_ATP865R: + case PCI_DEVICE_ID_ARTOP_ATP860: + case PCI_DEVICE_ID_ARTOP_ATP860R: + return ((int) aec6260_tune_chipset(drive, speed)); + case PCI_DEVICE_ID_ARTOP_ATP850UF: + return ((int) aec6210_tune_chipset(drive, speed)); + default: + return -1; + } +} + +static int config_chipset_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, aec62xx_ratemask(drive)); + + if (!(speed)) + return 0; + + (void) aec62xx_tune_chipset(drive, speed); + return ide_dma_enable(drive); +} + +static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio) +{ + u8 speed = 0; + u8 new_pio = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); + + switch(pio) { + case 5: speed = new_pio; break; + case 4: speed = XFER_PIO_4; break; + case 3: speed = XFER_PIO_3; break; + case 2: speed = XFER_PIO_2; break; + case 1: speed = XFER_PIO_1; break; + default: speed = XFER_PIO_0; break; + } + (void) aec62xx_tune_chipset(drive, speed); +} + +static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + if ((id->capability & 1) && drive->autodma) { + + if (ide_use_dma(drive)) { + if (config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + aec62xx_tune_drive(drive, 5); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +static int aec62xx_irq_timeout (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + + switch(dev->device) { + case PCI_DEVICE_ID_ARTOP_ATP860: + case PCI_DEVICE_ID_ARTOP_ATP860R: + case PCI_DEVICE_ID_ARTOP_ATP865: + case PCI_DEVICE_ID_ARTOP_ATP865R: + printk(" AEC62XX time out "); +#if 0 + { + int i = 0; + u8 reg49h = 0; + pci_read_config_byte(HWIF(drive)->pci_dev, 0x49, ®49h); + for (i=0;i<256;i++) + pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h|0x10); + pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h & ~0x10); + } + return 0; +#endif + default: + break; + } +#if 0 + { + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 tmp1 = 0, tmp2 = 0, mode6 = 0; + + pci_read_config_byte(dev, 0x44, &tmp1); + pci_read_config_byte(dev, 0x45, &tmp2); + printk(" AEC6280 r44=%x r45=%x ",tmp1,tmp2); + mode6 = HWIF(drive)->INB(((hwif->channel) ? + hwif->mate->dma_status : + hwif->dma_status)); + printk(" AEC6280 133=%x ", (mode6 & 0x10)); + } +#endif + return 0; +} + +static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name) +{ + int bus_speed = system_bus_clock(); + + if (dev->resource[PCI_ROM_RESOURCE].start) { + pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); + printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start); + } + + if (bus_speed <= 33) + pci_set_drvdata(dev, (void *) aec6xxx_33_base); + else + pci_set_drvdata(dev, (void *) aec6xxx_34_base); + + return dev->irq; +} + +static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) +{ + hwif->autodma = 0; + hwif->tuneproc = &aec62xx_tune_drive; + hwif->speedproc = &aec62xx_tune_chipset; + + if (hwif->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { + hwif->serialized = hwif->channel; + hwif->no_dsc = 1; + } + + if (hwif->mate) + hwif->mate->serialized = hwif->serialized; + + if (!hwif->dma_base) { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + return; + } + + hwif->ultra_mask = 0x7f; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + hwif->ide_dma_check = &aec62xx_config_drive_xfer_rate; + hwif->ide_dma_lostirq = &aec62xx_irq_timeout; + hwif->ide_dma_timeout = &aec62xx_irq_timeout; + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +static void __devinit init_dma_aec62xx(ide_hwif_t *hwif, unsigned long dmabase) +{ + struct pci_dev *dev = hwif->pci_dev; + + if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { + u8 reg54h = 0; + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + pci_read_config_byte(dev, 0x54, ®54h); + pci_write_config_byte(dev, 0x54, reg54h & ~(hwif->channel ? 0xF0 : 0x0F)); + spin_unlock_irqrestore(&ide_lock, flags); + } else { + u8 ata66 = 0; + pci_read_config_byte(hwif->pci_dev, 0x49, &ata66); + if (!(hwif->udma_four)) + hwif->udma_four = (ata66&(hwif->channel?0x02:0x01))?0:1; + } + + ide_setup_dma(hwif, dmabase, 8); +} + +static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d) +{ + return ide_setup_pci_device(dev, d); +} + +static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d) +{ + unsigned long bar4reg = pci_resource_start(dev, 4); + + if (inb(bar4reg+2) & 0x10) { + strcpy(d->name, "AEC6880"); + if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) + strcpy(d->name, "AEC6880R"); + } else { + strcpy(d->name, "AEC6280"); + if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) + strcpy(d->name, "AEC6280R"); + } + + return ide_setup_pci_device(dev, d); +} + +static ide_pci_device_t aec62xx_chipsets[] __devinitdata = { + { /* 0 */ + .name = "AEC6210", + .init_setup = init_setup_aec62xx, + .init_chipset = init_chipset_aec62xx, + .init_hwif = init_hwif_aec62xx, + .init_dma = init_dma_aec62xx, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, + .bootable = OFF_BOARD, + },{ /* 1 */ + .name = "AEC6260", + .init_setup = init_setup_aec62xx, + .init_chipset = init_chipset_aec62xx, + .init_hwif = init_hwif_aec62xx, + .init_dma = init_dma_aec62xx, + .channels = 2, + .autodma = NOAUTODMA, + .bootable = OFF_BOARD, + },{ /* 2 */ + .name = "AEC6260R", + .init_setup = init_setup_aec62xx, + .init_chipset = init_chipset_aec62xx, + .init_hwif = init_hwif_aec62xx, + .init_dma = init_dma_aec62xx, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, + .bootable = NEVER_BOARD, + },{ /* 3 */ + .name = "AEC6X80", + .init_setup = init_setup_aec6x80, + .init_chipset = init_chipset_aec62xx, + .init_hwif = init_hwif_aec62xx, + .init_dma = init_dma_aec62xx, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 4 */ + .name = "AEC6X80R", + .init_setup = init_setup_aec6x80, + .init_chipset = init_chipset_aec62xx, + .init_hwif = init_hwif_aec62xx, + .init_dma = init_dma_aec62xx, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, + .bootable = OFF_BOARD, + } +}; + +/** + * aec62xx_init_one - called when a AEC is found + * @dev: the aec62xx device + * @id: the matching pci id + * + * Called when the PCI registration layer (or the IDE initialization) + * finds a device matching our IDE device tables. + */ + +static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ide_pci_device_t *d = &aec62xx_chipsets[id->driver_data]; + + return d->init_setup(dev, d); +} + +static struct pci_device_id aec62xx_pci_tbl[] = { + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl); + +static struct pci_driver driver = { + .name = "AEC62xx_IDE", + .id_table = aec62xx_pci_tbl, + .probe = aec62xx_init_one, +}; + +static int aec62xx_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(aec62xx_ide_init); + +MODULE_AUTHOR("Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c new file mode 100644 index 0000000..67efb38 --- /dev/null +++ b/drivers/ide/pci/alim15x3.c @@ -0,0 +1,913 @@ +/* + * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02 + * + * Copyright (C) 1998-2000 Michel Aubry, Maintainer + * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer + * Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer + * + * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org) + * May be copied or modified under the terms of the GNU General Public License + * Copyright (C) 2002 Alan Cox <alan@redhat.com> + * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> + * + * (U)DMA capable version of ali 1533/1543(C), 1535(D) + * + ********************************************************************** + * 9/7/99 --Parts from the above author are included and need to be + * converted into standard interface, once I finish the thought. + * + * Recent changes + * Don't use LBA48 mode on ALi <= 0xC4 + * Don't poke 0x79 with a non ALi northbridge + * Don't flip undefined bits on newer chipsets (fix Fujitsu laptop hang) + * Allow UDMA6 on revisions > 0xC4 + * + * Documentation + * Chipset documentation available under NDA only + * + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/init.h> + +#include <asm/io.h> + +#define DISPLAY_ALI_TIMINGS + +/* + * ALi devices are not plug in. Otherwise these static values would + * need to go. They ought to go away anyway + */ + +static u8 m5229_revision; +static u8 chip_is_1543c_e; +static struct pci_dev *isa_dev; + +#if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) +#include <linux/stat.h> +#include <linux/proc_fs.h> + +static u8 ali_proc = 0; + +static struct pci_dev *bmide_dev; + +static char *fifo[4] = { + "FIFO Off", + "FIFO On ", + "DMA mode", + "PIO mode" }; + +static char *udmaT[8] = { + "1.5T", + " 2T", + "2.5T", + " 3T", + "3.5T", + " 4T", + " 6T", + " 8T" +}; + +static char *channel_status[8] = { + "OK ", + "busy ", + "DRQ ", + "DRQ busy ", + "error ", + "error busy ", + "error DRQ ", + "error DRQ busy" +}; + +/** + * ali_get_info - generate proc file for ALi IDE + * @buffer: buffer to fill + * @addr: address of user start in buffer + * @offset: offset into 'file' + * @count: buffer count + * + * Walks the Ali devices and outputs summary data on the tuning and + * anything else that will help with debugging + */ + +static int ali_get_info (char *buffer, char **addr, off_t offset, int count) +{ + unsigned long bibma; + u8 reg53h, reg5xh, reg5yh, reg5xh1, reg5yh1, c0, c1, rev, tmp; + char *q, *p = buffer; + + /* fetch rev. */ + pci_read_config_byte(bmide_dev, 0x08, &rev); + if (rev >= 0xc1) /* M1543C or newer */ + udmaT[7] = " ???"; + else + fifo[3] = " ??? "; + + /* first fetch bibma: */ + + bibma = pci_resource_start(bmide_dev, 4); + + /* + * at that point bibma+0x2 et bibma+0xa are byte + * registers to investigate: + */ + c0 = inb(bibma + 0x02); + c1 = inb(bibma + 0x0a); + + p += sprintf(p, + "\n Ali M15x3 Chipset.\n"); + p += sprintf(p, + " ------------------\n"); + pci_read_config_byte(bmide_dev, 0x78, ®53h); + p += sprintf(p, "PCI Clock: %d.\n", reg53h); + + pci_read_config_byte(bmide_dev, 0x53, ®53h); + p += sprintf(p, + "CD_ROM FIFO:%s, CD_ROM DMA:%s\n", + (reg53h & 0x02) ? "Yes" : "No ", + (reg53h & 0x01) ? "Yes" : "No " ); + pci_read_config_byte(bmide_dev, 0x74, ®53h); + p += sprintf(p, + "FIFO Status: contains %d Words, runs%s%s\n\n", + (reg53h & 0x3f), + (reg53h & 0x40) ? " OVERWR" : "", + (reg53h & 0x80) ? " OVERRD." : "." ); + + p += sprintf(p, + "-------------------primary channel" + "-------------------secondary channel" + "---------\n\n"); + + pci_read_config_byte(bmide_dev, 0x09, ®53h); + p += sprintf(p, + "channel status: %s" + " %s\n", + (reg53h & 0x20) ? "On " : "Off", + (reg53h & 0x10) ? "On " : "Off" ); + + p += sprintf(p, + "both channels togth: %s" + " %s\n", + (c0&0x80) ? "No " : "Yes", + (c1&0x80) ? "No " : "Yes" ); + + pci_read_config_byte(bmide_dev, 0x76, ®53h); + p += sprintf(p, + "Channel state: %s %s\n", + channel_status[reg53h & 0x07], + channel_status[(reg53h & 0x70) >> 4] ); + + pci_read_config_byte(bmide_dev, 0x58, ®5xh); + pci_read_config_byte(bmide_dev, 0x5c, ®5yh); + p += sprintf(p, + "Add. Setup Timing: %dT" + " %dT\n", + (reg5xh & 0x07) ? (reg5xh & 0x07) : 8, + (reg5yh & 0x07) ? (reg5yh & 0x07) : 8 ); + + pci_read_config_byte(bmide_dev, 0x59, ®5xh); + pci_read_config_byte(bmide_dev, 0x5d, ®5yh); + p += sprintf(p, + "Command Act. Count: %dT" + " %dT\n" + "Command Rec. Count: %dT" + " %dT\n\n", + (reg5xh & 0x70) ? ((reg5xh & 0x70) >> 4) : 8, + (reg5yh & 0x70) ? ((reg5yh & 0x70) >> 4) : 8, + (reg5xh & 0x0f) ? (reg5xh & 0x0f) : 16, + (reg5yh & 0x0f) ? (reg5yh & 0x0f) : 16 ); + + p += sprintf(p, + "----------------drive0-----------drive1" + "------------drive0-----------drive1------\n\n"); + p += sprintf(p, + "DMA enabled: %s %s" + " %s %s\n", + (c0&0x20) ? "Yes" : "No ", + (c0&0x40) ? "Yes" : "No ", + (c1&0x20) ? "Yes" : "No ", + (c1&0x40) ? "Yes" : "No " ); + + pci_read_config_byte(bmide_dev, 0x54, ®5xh); + pci_read_config_byte(bmide_dev, 0x55, ®5yh); + q = "FIFO threshold: %2d Words %2d Words" + " %2d Words %2d Words\n"; + if (rev < 0xc1) { + if ((rev == 0x20) && + (pci_read_config_byte(bmide_dev, 0x4f, &tmp), (tmp &= 0x20))) { + p += sprintf(p, q, 8, 8, 8, 8); + } else { + p += sprintf(p, q, + (reg5xh & 0x03) + 12, + ((reg5xh & 0x30)>>4) + 12, + (reg5yh & 0x03) + 12, + ((reg5yh & 0x30)>>4) + 12 ); + } + } else { + int t1 = (tmp = (reg5xh & 0x03)) ? (tmp << 3) : 4; + int t2 = (tmp = ((reg5xh & 0x30)>>4)) ? (tmp << 3) : 4; + int t3 = (tmp = (reg5yh & 0x03)) ? (tmp << 3) : 4; + int t4 = (tmp = ((reg5yh & 0x30)>>4)) ? (tmp << 3) : 4; + p += sprintf(p, q, t1, t2, t3, t4); + } + +#if 0 + p += sprintf(p, + "FIFO threshold: %2d Words %2d Words" + " %2d Words %2d Words\n", + (reg5xh & 0x03) + 12, + ((reg5xh & 0x30)>>4) + 12, + (reg5yh & 0x03) + 12, + ((reg5yh & 0x30)>>4) + 12 ); +#endif + + p += sprintf(p, + "FIFO mode: %s %s %s %s\n", + fifo[((reg5xh & 0x0c) >> 2)], + fifo[((reg5xh & 0xc0) >> 6)], + fifo[((reg5yh & 0x0c) >> 2)], + fifo[((reg5yh & 0xc0) >> 6)] ); + + pci_read_config_byte(bmide_dev, 0x5a, ®5xh); + pci_read_config_byte(bmide_dev, 0x5b, ®5xh1); + pci_read_config_byte(bmide_dev, 0x5e, ®5yh); + pci_read_config_byte(bmide_dev, 0x5f, ®5yh1); + + p += sprintf(p,/* + "------------------drive0-----------drive1" + "------------drive0-----------drive1------\n")*/ + "Dt RW act. Cnt %2dT %2dT" + " %2dT %2dT\n" + "Dt RW rec. Cnt %2dT %2dT" + " %2dT %2dT\n\n", + (reg5xh & 0x70) ? ((reg5xh & 0x70) >> 4) : 8, + (reg5xh1 & 0x70) ? ((reg5xh1 & 0x70) >> 4) : 8, + (reg5yh & 0x70) ? ((reg5yh & 0x70) >> 4) : 8, + (reg5yh1 & 0x70) ? ((reg5yh1 & 0x70) >> 4) : 8, + (reg5xh & 0x0f) ? (reg5xh & 0x0f) : 16, + (reg5xh1 & 0x0f) ? (reg5xh1 & 0x0f) : 16, + (reg5yh & 0x0f) ? (reg5yh & 0x0f) : 16, + (reg5yh1 & 0x0f) ? (reg5yh1 & 0x0f) : 16 ); + + p += sprintf(p, + "-----------------------------------UDMA Timings" + "--------------------------------\n\n"); + + pci_read_config_byte(bmide_dev, 0x56, ®5xh); + pci_read_config_byte(bmide_dev, 0x57, ®5yh); + p += sprintf(p, + "UDMA: %s %s" + " %s %s\n" + "UDMA timings: %s %s" + " %s %s\n\n", + (reg5xh & 0x08) ? "OK" : "No", + (reg5xh & 0x80) ? "OK" : "No", + (reg5yh & 0x08) ? "OK" : "No", + (reg5yh & 0x80) ? "OK" : "No", + udmaT[(reg5xh & 0x07)], + udmaT[(reg5xh & 0x70) >> 4], + udmaT[reg5yh & 0x07], + udmaT[(reg5yh & 0x70) >> 4] ); + + return p-buffer; /* => must be less than 4k! */ +} +#endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) */ + +/** + * ali15x3_tune_drive - set up a drive + * @drive: drive to tune + * @pio: unused + * + * Select the best PIO timing for the drive in question. Then + * program the controller for this drive set up + */ + +static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio) +{ + ide_pio_data_t d; + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + int s_time, a_time, c_time; + u8 s_clc, a_clc, r_clc; + unsigned long flags; + int bus_speed = system_bus_clock(); + int port = hwif->channel ? 0x5c : 0x58; + int portFIFO = hwif->channel ? 0x55 : 0x54; + u8 cd_dma_fifo = 0; + int unit = drive->select.b.unit & 1; + + pio = ide_get_best_pio_mode(drive, pio, 5, &d); + s_time = ide_pio_timings[pio].setup_time; + a_time = ide_pio_timings[pio].active_time; + if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) + s_clc = 0; + if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8) + a_clc = 0; + c_time = ide_pio_timings[pio].cycle_time; + +#if 0 + if ((r_clc = ((c_time - s_time - a_time) * bus_speed + 999) / 1000) >= 16) + r_clc = 0; +#endif + + if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) { + r_clc = 1; + } else { + if (r_clc >= 16) + r_clc = 0; + } + local_irq_save(flags); + + /* + * PIO mode => ATA FIFO on, ATAPI FIFO off + */ + pci_read_config_byte(dev, portFIFO, &cd_dma_fifo); + if (drive->media==ide_disk) { + if (unit) { + pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50); + } else { + pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05); + } + } else { + if (unit) { + pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F); + } else { + pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0); + } + } + + pci_write_config_byte(dev, port, s_clc); + pci_write_config_byte(dev, port+drive->select.b.unit+2, (a_clc << 4) | r_clc); + local_irq_restore(flags); + + /* + * setup active rec + * { 70, 165, 365 }, PIO Mode 0 + * { 50, 125, 208 }, PIO Mode 1 + * { 30, 100, 110 }, PIO Mode 2 + * { 30, 80, 70 }, PIO Mode 3 with IORDY + * { 25, 70, 25 }, PIO Mode 4 with IORDY ns + * { 20, 50, 30 } PIO Mode 5 with IORDY (nonstandard) + */ + +} + +/** + * ali15x3_can_ultra - check for ultra DMA support + * @drive: drive to do the check + * + * Check the drive and controller revisions. Return 0 if UDMA is + * not available, or 1 if UDMA can be used. The actual rules for + * the ALi are + * No UDMA on revisions <= 0x20 + * Disk only for revisions < 0xC2 + * Not WDC drives for revisions < 0xC2 + * + * FIXME: WDC ifdef needs to die + */ + +static u8 ali15x3_can_ultra (ide_drive_t *drive) +{ +#ifndef CONFIG_WDC_ALI15X3 + struct hd_driveid *id = drive->id; +#endif /* CONFIG_WDC_ALI15X3 */ + + if (m5229_revision <= 0x20) { + return 0; + } else if ((m5229_revision < 0xC2) && +#ifndef CONFIG_WDC_ALI15X3 + ((chip_is_1543c_e && strstr(id->model, "WDC ")) || + (drive->media!=ide_disk))) { +#else /* CONFIG_WDC_ALI15X3 */ + (drive->media!=ide_disk)) { +#endif /* CONFIG_WDC_ALI15X3 */ + return 0; + } else { + return 1; + } +} + +/** + * ali15x3_ratemask - generate DMA mode list + * @drive: drive to compute against + * + * Generate a list of the available DMA modes for the drive. + * FIXME: this function contains lots of bogus masking we can dump + * + * Return the highest available mode (UDMA33, UDMA66, UDMA100,..) + */ + +static u8 ali15x3_ratemask (ide_drive_t *drive) +{ + u8 mode = 0, can_ultra = ali15x3_can_ultra(drive); + + if (m5229_revision > 0xC4 && can_ultra) { + mode = 4; + } else if (m5229_revision == 0xC4 && can_ultra) { + mode = 3; + } else if (m5229_revision >= 0xC2 && can_ultra) { + mode = 2; + } else if (can_ultra) { + return 1; + } else { + return 0; + } + + /* + * If the drive sees no suitable cable then UDMA 33 + * is the highest permitted mode + */ + + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + return mode; +} + +/** + * ali15x3_tune_chipset - set up chiset for new speed + * @drive: drive to configure for + * @xferspeed: desired speed + * + * Configure the hardware for the desired IDE transfer mode. + * We also do the needed drive configuration through helpers + */ + +static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 speed = ide_rate_filter(ali15x3_ratemask(drive), xferspeed); + u8 speed1 = speed; + u8 unit = (drive->select.b.unit & 0x01); + u8 tmpbyte = 0x00; + int m5229_udma = (hwif->channel) ? 0x57 : 0x56; + + if (speed == XFER_UDMA_6) + speed1 = 0x47; + + if (speed < XFER_UDMA_0) { + u8 ultra_enable = (unit) ? 0x7f : 0xf7; + /* + * clear "ultra enable" bit + */ + pci_read_config_byte(dev, m5229_udma, &tmpbyte); + tmpbyte &= ultra_enable; + pci_write_config_byte(dev, m5229_udma, tmpbyte); + + if (speed < XFER_SW_DMA_0) + ali15x3_tune_drive(drive, speed); + } else { + pci_read_config_byte(dev, m5229_udma, &tmpbyte); + tmpbyte &= (0x0f << ((1-unit) << 2)); + /* + * enable ultra dma and set timing + */ + tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2)); + pci_write_config_byte(dev, m5229_udma, tmpbyte); + if (speed >= XFER_UDMA_3) { + pci_read_config_byte(dev, 0x4b, &tmpbyte); + tmpbyte |= 1; + pci_write_config_byte(dev, 0x4b, tmpbyte); + } + } + return (ide_config_drive_speed(drive, speed)); +} + + +/** + * config_chipset_for_dma - set up DMA mode + * @drive: drive to configure for + * + * Place a drive into DMA mode and tune the chipset for + * the selected speed. + * + * Returns true if DMA mode can be used + */ + +static int config_chipset_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, ali15x3_ratemask(drive)); + + if (!(speed)) + return 0; + + (void) ali15x3_tune_chipset(drive, speed); + return ide_dma_enable(drive); +} + +/** + * ali15x3_config_drive_for_dma - configure for DMA + * @drive: drive to configure + * + * Configure a drive for DMA operation. If DMA is not possible we + * drop the drive into PIO mode instead. + * + * FIXME: exactly what are we trying to return here + */ + +static int ali15x3_config_drive_for_dma(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + if ((m5229_revision<=0x20) && (drive->media!=ide_disk)) + return hwif->ide_dma_off_quietly(drive); + + drive->init_speed = 0; + + if ((id != NULL) && ((id->capability & 1) != 0) && drive->autodma) { + /* Consult the list of known "bad" drives */ + if (__ide_dma_bad_drive(drive)) + goto ata_pio; + if ((id->field_valid & 4) && (m5229_revision >= 0xC2)) { + if (id->dma_ultra & hwif->ultra_mask) { + /* Force if Capable UltraDMA */ + int dma = config_chipset_for_dma(drive); + if ((id->field_valid & 2) && !dma) + goto try_dma_modes; + } + } else if (id->field_valid & 2) { +try_dma_modes: + if ((id->dma_mword & hwif->mwdma_mask) || + (id->dma_1word & hwif->swdma_mask)) { + /* Force if Capable regular DMA modes */ + if (!config_chipset_for_dma(drive)) + goto no_dma_set; + } + } else if (__ide_dma_good_drive(drive) && + (id->eide_dma_time < 150)) { + /* Consult the list of known "good" drives */ + if (!config_chipset_for_dma(drive)) + goto no_dma_set; + } else { + goto ata_pio; + } + } else { +ata_pio: + hwif->tuneproc(drive, 255); +no_dma_set: + return hwif->ide_dma_off_quietly(drive); + } + return hwif->ide_dma_on(drive); +} + +/** + * ali15x3_dma_setup - begin a DMA phase + * @drive: target device + * + * Returns 1 if the DMA cannot be performed, zero on success. + */ + +static int ali15x3_dma_setup(ide_drive_t *drive) +{ + if (m5229_revision < 0xC2 && drive->media != ide_disk) { + if (rq_data_dir(drive->hwif->hwgroup->rq)) + return 1; /* try PIO instead of DMA */ + } + return ide_dma_setup(drive); +} + +/** + * init_chipset_ali15x3 - Initialise an ALi IDE controller + * @dev: PCI device + * @name: Name of the controller + * + * This function initializes the ALI IDE controller and where + * appropriate also sets up the 1533 southbridge. + */ + +static unsigned int __init init_chipset_ali15x3 (struct pci_dev *dev, const char *name) +{ + unsigned long flags; + u8 tmpbyte; + struct pci_dev *north = pci_find_slot(0, PCI_DEVFN(0,0)); + + pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision); + + isa_dev = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); + +#if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) + if (!ali_proc) { + ali_proc = 1; + bmide_dev = dev; + ide_pci_create_host_proc("ali", ali_get_info); + } +#endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) */ + + local_irq_save(flags); + + if (m5229_revision < 0xC2) { + /* + * revision 0x20 (1543-E, 1543-F) + * revision 0xC0, 0xC1 (1543C-C, 1543C-D, 1543C-E) + * clear CD-ROM DMA write bit, m5229, 0x4b, bit 7 + */ + pci_read_config_byte(dev, 0x4b, &tmpbyte); + /* + * clear bit 7 + */ + pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F); + local_irq_restore(flags); + return 0; + } + + /* + * 1543C-B?, 1535, 1535D, 1553 + * Note 1: not all "motherboard" support this detection + * Note 2: if no udma 66 device, the detection may "error". + * but in this case, we will not set the device to + * ultra 66, the detection result is not important + */ + + /* + * enable "Cable Detection", m5229, 0x4b, bit3 + */ + pci_read_config_byte(dev, 0x4b, &tmpbyte); + pci_write_config_byte(dev, 0x4b, tmpbyte | 0x08); + + /* + * We should only tune the 1533 enable if we are using an ALi + * North bridge. We might have no north found on some zany + * box without a device at 0:0.0. The ALi bridge will be at + * 0:0.0 so if we didn't find one we know what is cooking. + */ + if (north && north->vendor != PCI_VENDOR_ID_AL) { + local_irq_restore(flags); + return 0; + } + + if (m5229_revision < 0xC5 && isa_dev) + { + /* + * set south-bridge's enable bit, m1533, 0x79 + */ + + pci_read_config_byte(isa_dev, 0x79, &tmpbyte); + if (m5229_revision == 0xC2) { + /* + * 1543C-B0 (m1533, 0x79, bit 2) + */ + pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x04); + } else if (m5229_revision >= 0xC3) { + /* + * 1553/1535 (m1533, 0x79, bit 1) + */ + pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02); + } + } + local_irq_restore(flags); + return 0; +} + +/** + * ata66_ali15x3 - check for UDMA 66 support + * @hwif: IDE interface + * + * This checks if the controller and the cable are capable + * of UDMA66 transfers. It doesn't check the drives. + * But see note 2 below! + * + * FIXME: frobs bits that are not defined on newer ALi devicea + */ + +static unsigned int __init ata66_ali15x3 (ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + unsigned int ata66 = 0; + u8 cable_80_pin[2] = { 0, 0 }; + + unsigned long flags; + u8 tmpbyte; + + local_irq_save(flags); + + if (m5229_revision >= 0xC2) { + /* + * Ultra66 cable detection (from Host View) + * m5229, 0x4a, bit0: primary, bit1: secondary 80 pin + */ + pci_read_config_byte(dev, 0x4a, &tmpbyte); + /* + * 0x4a, bit0 is 0 => primary channel + * has 80-pin (from host view) + */ + if (!(tmpbyte & 0x01)) cable_80_pin[0] = 1; + /* + * 0x4a, bit1 is 0 => secondary channel + * has 80-pin (from host view) + */ + if (!(tmpbyte & 0x02)) cable_80_pin[1] = 1; + /* + * Allow ata66 if cable of current channel has 80 pins + */ + ata66 = (hwif->channel)?cable_80_pin[1]:cable_80_pin[0]; + } else { + /* + * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010 + */ + pci_read_config_byte(isa_dev, 0x5e, &tmpbyte); + chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0; + } + + /* + * CD_ROM DMA on (m5229, 0x53, bit0) + * Enable this bit even if we want to use PIO + * PIO FIFO off (m5229, 0x53, bit1) + * The hardware will use 0x54h and 0x55h to control PIO FIFO + * (Not on later devices it seems) + * + * 0x53 changes meaning on later revs - we must no touch + * bit 1 on them. Need to check if 0x20 is the right break + */ + + pci_read_config_byte(dev, 0x53, &tmpbyte); + + if(m5229_revision <= 0x20) + tmpbyte = (tmpbyte & (~0x02)) | 0x01; + else + tmpbyte |= 0x01; + + pci_write_config_byte(dev, 0x53, tmpbyte); + + local_irq_restore(flags); + + return(ata66); +} + +/** + * init_hwif_common_ali15x3 - Set up ALI IDE hardware + * @hwif: IDE interface + * + * Initialize the IDE structure side of the ALi 15x3 driver. + */ + +static void __init init_hwif_common_ali15x3 (ide_hwif_t *hwif) +{ + hwif->autodma = 0; + hwif->tuneproc = &ali15x3_tune_drive; + hwif->speedproc = &ali15x3_tune_chipset; + + /* don't use LBA48 DMA on ALi devices before rev 0xC5 */ + hwif->no_lba48_dma = (m5229_revision <= 0xC4) ? 1 : 0; + + if (!hwif->dma_base) { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + return; + } + + hwif->atapi_dma = 1; + + if (m5229_revision > 0x20) + hwif->ultra_mask = 0x7f; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + if (m5229_revision >= 0x20) { + /* + * M1543C or newer for DMAing + */ + hwif->ide_dma_check = &ali15x3_config_drive_for_dma; + hwif->dma_setup = &ali15x3_dma_setup; + if (!noautodma) + hwif->autodma = 1; + if (!(hwif->udma_four)) + hwif->udma_four = ata66_ali15x3(hwif); + } + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +/** + * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff + * @hwif: interface to configure + * + * Obtain the IRQ tables for an ALi based IDE solution on the PC + * class platforms. This part of the code isn't applicable to the + * Sparc systems + */ + +static void __init init_hwif_ali15x3 (ide_hwif_t *hwif) +{ + u8 ideic, inmir; + s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6, + 1, 11, 0, 12, 0, 14, 0, 15 }; + int irq = -1; + + if (hwif->pci_dev->device == PCI_DEVICE_ID_AL_M5229) + hwif->irq = hwif->channel ? 15 : 14; + + if (isa_dev) { + /* + * read IDE interface control + */ + pci_read_config_byte(isa_dev, 0x58, &ideic); + + /* bit0, bit1 */ + ideic = ideic & 0x03; + + /* get IRQ for IDE Controller */ + if ((hwif->channel && ideic == 0x03) || + (!hwif->channel && !ideic)) { + /* + * get SIRQ1 routing table + */ + pci_read_config_byte(isa_dev, 0x44, &inmir); + inmir = inmir & 0x0f; + irq = irq_routing_table[inmir]; + } else if (hwif->channel && !(ideic & 0x01)) { + /* + * get SIRQ2 routing table + */ + pci_read_config_byte(isa_dev, 0x75, &inmir); + inmir = inmir & 0x0f; + irq = irq_routing_table[inmir]; + } + if(irq >= 0) + hwif->irq = irq; + } + + init_hwif_common_ali15x3(hwif); +} + +/** + * init_dma_ali15x3 - set up DMA on ALi15x3 + * @hwif: IDE interface + * @dmabase: DMA interface base PCI address + * + * Set up the DMA functionality on the ALi 15x3. For the ALi + * controllers this is generic so we can let the generic code do + * the actual work. + */ + +static void __init init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase) +{ + if (m5229_revision < 0x20) + return; + if (!(hwif->channel)) + hwif->OUTB(hwif->INB(dmabase+2) & 0x60, dmabase+2); + ide_setup_dma(hwif, dmabase, 8); +} + +static ide_pci_device_t ali15x3_chipset __devinitdata = { + .name = "ALI15X3", + .init_chipset = init_chipset_ali15x3, + .init_hwif = init_hwif_ali15x3, + .init_dma = init_dma_ali15x3, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, +}; + +/** + * alim15x3_init_one - set up an ALi15x3 IDE controller + * @dev: PCI device to set up + * + * Perform the actual set up for an ALi15x3 that has been found by the + * hot plug layer. + */ + +static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ide_pci_device_t *d = &ali15x3_chipset; + + if(pci_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, NULL)) + printk(KERN_ERR "Warning: ATI Radeon IGP Northbridge is not yet fully tested.\n"); + +#if defined(CONFIG_SPARC64) + d->init_hwif = init_hwif_common_ali15x3; +#endif /* CONFIG_SPARC64 */ + return ide_setup_pci_device(dev, d); +} + + +static struct pci_device_id alim15x3_pci_tbl[] = { + { PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5228, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl); + +static struct pci_driver driver = { + .name = "ALI15x3_IDE", + .id_table = alim15x3_pci_tbl, + .probe = alim15x3_init_one, +}; + +static int ali15x3_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(ali15x3_ide_init); + +MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox"); +MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c new file mode 100644 index 0000000..47225e3 --- /dev/null +++ b/drivers/ide/pci/amd74xx.c @@ -0,0 +1,543 @@ +/* + * Version 2.13 + * + * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04 + * IDE driver for Linux. + * + * Copyright (c) 2000-2002 Vojtech Pavlik + * + * Based on the work of: + * Andre Hedrick + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ide.h> +#include <asm/io.h> + +#include "ide-timing.h" + +#define DISPLAY_AMD_TIMINGS + +#define AMD_IDE_ENABLE (0x00 + amd_config->base) +#define AMD_IDE_CONFIG (0x01 + amd_config->base) +#define AMD_CABLE_DETECT (0x02 + amd_config->base) +#define AMD_DRIVE_TIMING (0x08 + amd_config->base) +#define AMD_8BIT_TIMING (0x0e + amd_config->base) +#define AMD_ADDRESS_SETUP (0x0c + amd_config->base) +#define AMD_UDMA_TIMING (0x10 + amd_config->base) + +#define AMD_UDMA 0x07 +#define AMD_UDMA_33 0x01 +#define AMD_UDMA_66 0x02 +#define AMD_UDMA_100 0x03 +#define AMD_UDMA_133 0x04 +#define AMD_CHECK_SWDMA 0x08 +#define AMD_BAD_SWDMA 0x10 +#define AMD_BAD_FIFO 0x20 +#define AMD_CHECK_SERENADE 0x40 + +/* + * AMD SouthBridge chips. + */ + +static struct amd_ide_chip { + unsigned short id; + unsigned long base; + unsigned char flags; +} amd_ide_chips[] = { + { PCI_DEVICE_ID_AMD_COBRA_7401, 0x40, AMD_UDMA_33 | AMD_BAD_SWDMA }, + { PCI_DEVICE_ID_AMD_VIPER_7409, 0x40, AMD_UDMA_66 | AMD_CHECK_SWDMA }, + { PCI_DEVICE_ID_AMD_VIPER_7411, 0x40, AMD_UDMA_100 | AMD_BAD_FIFO }, + { PCI_DEVICE_ID_AMD_OPUS_7441, 0x40, AMD_UDMA_100 }, + { PCI_DEVICE_ID_AMD_8111_IDE, 0x40, AMD_UDMA_133 | AMD_CHECK_SERENADE }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x50, AMD_UDMA_100 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, AMD_UDMA_133 }, + { 0 } +}; + +static struct amd_ide_chip *amd_config; +static ide_pci_device_t *amd_chipset; +static unsigned int amd_80w; +static unsigned int amd_clock; + +static char *amd_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" }; +static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 }; + +/* + * AMD /proc entry. + */ + +#ifdef CONFIG_PROC_FS + +#include <linux/stat.h> +#include <linux/proc_fs.h> + +static u8 amd74xx_proc; + +static unsigned char amd_udma2cyc[] = { 4, 6, 8, 10, 3, 2, 1, 15 }; +static unsigned long amd_base; +static struct pci_dev *bmide_dev; +extern int (*amd74xx_display_info)(char *, char **, off_t, int); /* ide-proc.c */ + +#define amd_print(format, arg...) p += sprintf(p, format "\n" , ## arg) +#define amd_print_drive(name, format, arg...)\ + p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n"); + +static int amd74xx_get_info(char *buffer, char **addr, off_t offset, int count) +{ + int speed[4], cycle[4], setup[4], active[4], recover[4], den[4], + uen[4], udma[4], active8b[4], recover8b[4]; + struct pci_dev *dev = bmide_dev; + unsigned int v, u, i; + unsigned short c, w; + unsigned char t; + int len; + char *p = buffer; + + amd_print("----------AMD BusMastering IDE Configuration----------------"); + + amd_print("Driver Version: 2.13"); + amd_print("South Bridge: %s", pci_name(bmide_dev)); + + pci_read_config_byte(dev, PCI_REVISION_ID, &t); + amd_print("Revision: IDE %#x", t); + amd_print("Highest DMA rate: %s", amd_dma[amd_config->flags & AMD_UDMA]); + + amd_print("BM-DMA base: %#lx", amd_base); + amd_print("PCI clock: %d.%dMHz", amd_clock / 1000, amd_clock / 100 % 10); + + amd_print("-----------------------Primary IDE-------Secondary IDE------"); + + pci_read_config_byte(dev, AMD_IDE_CONFIG, &t); + amd_print("Prefetch Buffer: %10s%20s", (t & 0x80) ? "yes" : "no", (t & 0x20) ? "yes" : "no"); + amd_print("Post Write Buffer: %10s%20s", (t & 0x40) ? "yes" : "no", (t & 0x10) ? "yes" : "no"); + + pci_read_config_byte(dev, AMD_IDE_ENABLE, &t); + amd_print("Enabled: %10s%20s", (t & 0x02) ? "yes" : "no", (t & 0x01) ? "yes" : "no"); + + c = inb(amd_base + 0x02) | (inb(amd_base + 0x0a) << 8); + amd_print("Simplex only: %10s%20s", (c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no"); + + amd_print("Cable Type: %10s%20s", (amd_80w & 1) ? "80w" : "40w", (amd_80w & 2) ? "80w" : "40w"); + + if (!amd_clock) + return p - buffer; + + amd_print("-------------------drive0----drive1----drive2----drive3-----"); + + pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t); + pci_read_config_dword(dev, AMD_DRIVE_TIMING, &v); + pci_read_config_word(dev, AMD_8BIT_TIMING, &w); + pci_read_config_dword(dev, AMD_UDMA_TIMING, &u); + + for (i = 0; i < 4; i++) { + setup[i] = ((t >> ((3 - i) << 1)) & 0x3) + 1; + recover8b[i] = ((w >> ((1 - (i >> 1)) << 3)) & 0xf) + 1; + active8b[i] = ((w >> (((1 - (i >> 1)) << 3) + 4)) & 0xf) + 1; + active[i] = ((v >> (((3 - i) << 3) + 4)) & 0xf) + 1; + recover[i] = ((v >> ((3 - i) << 3)) & 0xf) + 1; + + udma[i] = amd_udma2cyc[((u >> ((3 - i) << 3)) & 0x7)]; + uen[i] = ((u >> ((3 - i) << 3)) & 0x40) ? 1 : 0; + den[i] = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2)); + + if (den[i] && uen[i] && udma[i] == 1) { + speed[i] = amd_clock * 3; + cycle[i] = 666666 / amd_clock; + continue; + } + + if (den[i] && uen[i] && udma[i] == 15) { + speed[i] = amd_clock * 4; + cycle[i] = 500000 / amd_clock; + continue; + } + + speed[i] = 4 * amd_clock / ((den[i] && uen[i]) ? udma[i] : (active[i] + recover[i]) * 2); + cycle[i] = 1000000 * ((den[i] && uen[i]) ? udma[i] : (active[i] + recover[i]) * 2) / amd_clock / 2; + } + + amd_print_drive("Transfer Mode: ", "%10s", den[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO"); + + amd_print_drive("Address Setup: ", "%8dns", 1000000 * setup[i] / amd_clock); + amd_print_drive("Cmd Active: ", "%8dns", 1000000 * active8b[i] / amd_clock); + amd_print_drive("Cmd Recovery: ", "%8dns", 1000000 * recover8b[i] / amd_clock); + amd_print_drive("Data Active: ", "%8dns", 1000000 * active[i] / amd_clock); + amd_print_drive("Data Recovery: ", "%8dns", 1000000 * recover[i] / amd_clock); + amd_print_drive("Cycle Time: ", "%8dns", cycle[i]); + amd_print_drive("Transfer Rate: ", "%4d.%dMB/s", speed[i] / 1000, speed[i] / 100 % 10); + + /* hoping p - buffer is less than 4K... */ + len = (p - buffer) - offset; + *addr = buffer + offset; + + return len > count ? count : len; +} + +#endif + +/* + * amd_set_speed() writes timing values to the chipset registers + */ + +static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timing *timing) +{ + unsigned char t; + + pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t); + t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); + pci_write_config_byte(dev, AMD_ADDRESS_SETUP, t); + + pci_write_config_byte(dev, AMD_8BIT_TIMING + (1 - (dn >> 1)), + ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1)); + + pci_write_config_byte(dev, AMD_DRIVE_TIMING + (3 - dn), + ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); + + switch (amd_config->flags & AMD_UDMA) { + case AMD_UDMA_33: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; + case AMD_UDMA_66: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break; + case AMD_UDMA_100: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break; + case AMD_UDMA_133: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break; + default: return; + } + + pci_write_config_byte(dev, AMD_UDMA_TIMING + (3 - dn), t); +} + +/* + * amd_set_drive() computes timing values configures the drive and + * the chipset to a desired transfer mode. It also can be called + * by upper layers. + */ + +static int amd_set_drive(ide_drive_t *drive, u8 speed) +{ + ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); + struct ide_timing t, p; + int T, UT; + + if (speed != XFER_PIO_SLOW && speed != drive->current_speed) + if (ide_config_drive_speed(drive, speed)) + printk(KERN_WARNING "ide%d: Drive %d didn't accept speed setting. Oh, well.\n", + drive->dn >> 1, drive->dn & 1); + + T = 1000000000 / amd_clock; + UT = T / min_t(int, max_t(int, amd_config->flags & AMD_UDMA, 1), 2); + + ide_timing_compute(drive, speed, &t, T, UT); + + if (peer->present) { + ide_timing_compute(peer, peer->current_speed, &p, T, UT); + ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); + } + + if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1; + if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15; + + amd_set_speed(HWIF(drive)->pci_dev, drive->dn, &t); + + if (!drive->init_speed) + drive->init_speed = speed; + drive->current_speed = speed; + + return 0; +} + +/* + * amd74xx_tune_drive() is a callback from upper layers for + * PIO-only tuning. + */ + +static void amd74xx_tune_drive(ide_drive_t *drive, u8 pio) +{ + if (pio == 255) { + amd_set_drive(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO)); + return; + } + + amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5)); +} + +/* + * amd74xx_dmaproc() is a callback from upper layers that can do + * a lot, but we use it for DMA/PIO tuning only, delegating everything + * else to the default ide_dmaproc(). + */ + +static int amd74xx_ide_dma_check(ide_drive_t *drive) +{ + int w80 = HWIF(drive)->udma_four; + + u8 speed = ide_find_best_mode(drive, + XFER_PIO | XFER_EPIO | XFER_MWDMA | XFER_UDMA | + ((amd_config->flags & AMD_BAD_SWDMA) ? 0 : XFER_SWDMA) | + (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_66 ? XFER_UDMA_66 : 0) | + (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_100 ? XFER_UDMA_100 : 0) | + (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_133 ? XFER_UDMA_133 : 0)); + + amd_set_drive(drive, speed); + + if (drive->autodma && (speed & XFER_MODE) != XFER_PIO) + return HWIF(drive)->ide_dma_on(drive); + return HWIF(drive)->ide_dma_off_quietly(drive); +} + +/* + * The initialization callback. Here we determine the IDE chip type + * and initialize its drive independent registers. + */ + +static unsigned int __init init_chipset_amd74xx(struct pci_dev *dev, const char *name) +{ + unsigned char t; + unsigned int u; + int i; + +/* + * Check for bad SWDMA. + */ + + if (amd_config->flags & AMD_CHECK_SWDMA) { + pci_read_config_byte(dev, PCI_REVISION_ID, &t); + if (t <= 7) + amd_config->flags |= AMD_BAD_SWDMA; + } + +/* + * Check 80-wire cable presence. + */ + + switch (amd_config->flags & AMD_UDMA) { + + case AMD_UDMA_133: + case AMD_UDMA_100: + pci_read_config_byte(dev, AMD_CABLE_DETECT, &t); + pci_read_config_dword(dev, AMD_UDMA_TIMING, &u); + amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0); + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) { + printk(KERN_WARNING "%s: BIOS didn't set cable bits correctly. Enabling workaround.\n", + amd_chipset->name); + amd_80w |= (1 << (1 - (i >> 4))); + } + break; + + case AMD_UDMA_66: + pci_read_config_dword(dev, AMD_UDMA_TIMING, &u); + for (i = 24; i >= 0; i -= 8) + if ((u >> i) & 4) + amd_80w |= (1 << (1 - (i >> 4))); + break; + } + +/* + * Take care of prefetch & postwrite. + */ + + pci_read_config_byte(dev, AMD_IDE_CONFIG, &t); + pci_write_config_byte(dev, AMD_IDE_CONFIG, + (amd_config->flags & AMD_BAD_FIFO) ? (t & 0x0f) : (t | 0xf0)); + +/* + * Take care of incorrectly wired Serenade mainboards. + */ + + if ((amd_config->flags & AMD_CHECK_SERENADE) && + dev->subsystem_vendor == PCI_VENDOR_ID_AMD && + dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) + amd_config->flags = AMD_UDMA_100; + +/* + * Determine the system bus clock. + */ + + amd_clock = system_bus_clock() * 1000; + + switch (amd_clock) { + case 33000: amd_clock = 33333; break; + case 37000: amd_clock = 37500; break; + case 41000: amd_clock = 41666; break; + } + + if (amd_clock < 20000 || amd_clock > 50000) { + printk(KERN_WARNING "%s: User given PCI clock speed impossible (%d), using 33 MHz instead.\n", + amd_chipset->name, amd_clock); + printk(KERN_WARNING "%s: Use ide0=ata66 if you want to assume 80-wire cable\n", + amd_chipset->name); + amd_clock = 33333; + } + +/* + * Print the boot message. + */ + + pci_read_config_byte(dev, PCI_REVISION_ID, &t); + printk(KERN_INFO "%s: %s (rev %02x) %s controller\n", + amd_chipset->name, pci_name(dev), t, amd_dma[amd_config->flags & AMD_UDMA]); + +/* + * Register /proc/ide/amd74xx entry + */ + +#if defined(DISPLAY_AMD_TIMINGS) && defined(CONFIG_PROC_FS) + if (!amd74xx_proc) { + amd_base = pci_resource_start(dev, 4); + bmide_dev = dev; + ide_pci_create_host_proc("amd74xx", amd74xx_get_info); + amd74xx_proc = 1; + } +#endif /* DISPLAY_AMD_TIMINGS && CONFIG_PROC_FS */ + + return dev->irq; +} + +static void __init init_hwif_amd74xx(ide_hwif_t *hwif) +{ + int i; + + if (hwif->irq == 0) /* 0 is bogus but will do for now */ + hwif->irq = pci_get_legacy_ide_irq(hwif->pci_dev, hwif->channel); + + hwif->autodma = 0; + + hwif->tuneproc = &amd74xx_tune_drive; + hwif->speedproc = &amd_set_drive; + + for (i = 0; i < 2; i++) { + hwif->drives[i].io_32bit = 1; + hwif->drives[i].unmask = 1; + hwif->drives[i].autotune = 1; + hwif->drives[i].dn = hwif->channel * 2 + i; + } + + if (!hwif->dma_base) + return; + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x7f; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + if (!hwif->udma_four) + hwif->udma_four = (amd_80w >> hwif->channel) & 1; + hwif->ide_dma_check = &amd74xx_ide_dma_check; + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +#define DECLARE_AMD_DEV(name_str) \ + { \ + .name = name_str, \ + .init_chipset = init_chipset_amd74xx, \ + .init_hwif = init_hwif_amd74xx, \ + .channels = 2, \ + .autodma = AUTODMA, \ + .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \ + .bootable = ON_BOARD, \ + } + +#define DECLARE_NV_DEV(name_str) \ + { \ + .name = name_str, \ + .init_chipset = init_chipset_amd74xx, \ + .init_hwif = init_hwif_amd74xx, \ + .channels = 2, \ + .autodma = AUTODMA, \ + .enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \ + .bootable = ON_BOARD, \ + } + +static ide_pci_device_t amd74xx_chipsets[] __devinitdata = { + /* 0 */ DECLARE_AMD_DEV("AMD7401"), + /* 1 */ DECLARE_AMD_DEV("AMD7409"), + /* 2 */ DECLARE_AMD_DEV("AMD7411"), + /* 3 */ DECLARE_AMD_DEV("AMD7441"), + /* 4 */ DECLARE_AMD_DEV("AMD8111"), + + /* 5 */ DECLARE_NV_DEV("NFORCE"), + /* 6 */ DECLARE_NV_DEV("NFORCE2"), + /* 7 */ DECLARE_NV_DEV("NFORCE2-U400R"), + /* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA"), + /* 9 */ DECLARE_NV_DEV("NFORCE3-150"), + /* 10 */ DECLARE_NV_DEV("NFORCE3-250"), + /* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA"), + /* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"), + /* 13 */ DECLARE_NV_DEV("NFORCE-CK804"), + /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"), +}; + +static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + amd_chipset = amd74xx_chipsets + id->driver_data; + amd_config = amd_ide_chips + id->driver_data; + if (dev->device != amd_config->id) { + printk(KERN_ERR "%s: assertion 0x%02x == 0x%02x failed !\n", + pci_name(dev), dev->device, amd_config->id); + return -ENODEV; + } + return ide_setup_pci_device(dev, amd_chipset); +} + +static struct pci_device_id amd74xx_pci_tbl[] = { + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_COBRA_7401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7409, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7411, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7441, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 }, +#ifdef CONFIG_BLK_DEV_IDE_SATA + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, +#endif + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 }, +#ifdef CONFIG_BLK_DEV_IDE_SATA + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 }, +#endif + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl); + +static struct pci_driver driver = { + .name = "AMD_IDE", + .id_table = amd74xx_pci_tbl, + .probe = amd74xx_probe, +}; + +static int amd74xx_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(amd74xx_ide_init); + +MODULE_AUTHOR("Vojtech Pavlik"); +MODULE_DESCRIPTION("AMD PCI IDE driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c new file mode 100644 index 0000000..df9ee9a --- /dev/null +++ b/drivers/ide/pci/atiixp.c @@ -0,0 +1,370 @@ +/* + * linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004 + * + * Copyright (C) 2003 ATI Inc. <hyu@ati.com> + * Copyright (C) 2004 Bartlomiej Zolnierkiewicz + * + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/delay.h> +#include <linux/init.h> + +#include <asm/io.h> + +#define ATIIXP_IDE_PIO_TIMING 0x40 +#define ATIIXP_IDE_MDMA_TIMING 0x44 +#define ATIIXP_IDE_PIO_CONTROL 0x48 +#define ATIIXP_IDE_PIO_MODE 0x4a +#define ATIIXP_IDE_UDMA_CONTROL 0x54 +#define ATIIXP_IDE_UDMA_MODE 0x56 + +typedef struct { + u8 command_width; + u8 recover_width; +} atiixp_ide_timing; + +static atiixp_ide_timing pio_timing[] = { + { 0x05, 0x0d }, + { 0x04, 0x07 }, + { 0x03, 0x04 }, + { 0x02, 0x02 }, + { 0x02, 0x00 }, +}; + +static atiixp_ide_timing mdma_timing[] = { + { 0x07, 0x07 }, + { 0x02, 0x01 }, + { 0x02, 0x00 }, +}; + +static int save_mdma_mode[4]; + +/** + * atiixp_ratemask - compute rate mask for ATIIXP IDE + * @drive: IDE drive to compute for + * + * Returns the available modes for the ATIIXP IDE controller. + */ + +static u8 atiixp_ratemask(ide_drive_t *drive) +{ + u8 mode = 3; + + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + return mode; +} + +/** + * atiixp_dma_2_pio - return the PIO mode matching DMA + * @xfer_rate: transfer speed + * + * Returns the nearest equivalent PIO timing for the PIO or DMA + * mode requested by the controller. + */ + +static u8 atiixp_dma_2_pio(u8 xfer_rate) { + switch(xfer_rate) { + case XFER_UDMA_6: + case XFER_UDMA_5: + case XFER_UDMA_4: + case XFER_UDMA_3: + case XFER_UDMA_2: + case XFER_UDMA_1: + case XFER_UDMA_0: + case XFER_MW_DMA_2: + case XFER_PIO_4: + return 4; + case XFER_MW_DMA_1: + case XFER_PIO_3: + return 3; + case XFER_SW_DMA_2: + case XFER_PIO_2: + return 2; + case XFER_MW_DMA_0: + case XFER_SW_DMA_1: + case XFER_SW_DMA_0: + case XFER_PIO_1: + case XFER_PIO_0: + case XFER_PIO_SLOW: + default: + return 0; + } +} + +static int atiixp_ide_dma_host_on(ide_drive_t *drive) +{ + struct pci_dev *dev = drive->hwif->pci_dev; + unsigned long flags; + u16 tmp16; + + spin_lock_irqsave(&ide_lock, flags); + + pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); + if (save_mdma_mode[drive->dn]) + tmp16 &= ~(1 << drive->dn); + else + tmp16 |= (1 << drive->dn); + pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16); + + spin_unlock_irqrestore(&ide_lock, flags); + + return __ide_dma_host_on(drive); +} + +static int atiixp_ide_dma_host_off(ide_drive_t *drive) +{ + struct pci_dev *dev = drive->hwif->pci_dev; + unsigned long flags; + u16 tmp16; + + spin_lock_irqsave(&ide_lock, flags); + + pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); + tmp16 &= ~(1 << drive->dn); + pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16); + + spin_unlock_irqrestore(&ide_lock, flags); + + return __ide_dma_host_off(drive); +} + +/** + * atiixp_tune_drive - tune a drive attached to a ATIIXP + * @drive: drive to tune + * @pio: desired PIO mode + * + * Set the interface PIO mode. + */ + +static void atiixp_tuneproc(ide_drive_t *drive, u8 pio) +{ + struct pci_dev *dev = drive->hwif->pci_dev; + unsigned long flags; + int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; + u32 pio_timing_data; + u16 pio_mode_data; + + spin_lock_irqsave(&ide_lock, flags); + + pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data); + pio_mode_data &= ~(0x07 << (drive->dn * 4)); + pio_mode_data |= (pio << (drive->dn * 4)); + pci_write_config_word(dev, ATIIXP_IDE_PIO_MODE, pio_mode_data); + + pci_read_config_dword(dev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data); + pio_timing_data &= ~(0xff << timing_shift); + pio_timing_data |= (pio_timing[pio].recover_width << timing_shift) | + (pio_timing[pio].command_width << (timing_shift + 4)); + pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data); + + spin_unlock_irqrestore(&ide_lock, flags); +} + +/** + * atiixp_tune_chipset - tune a ATIIXP interface + * @drive: IDE drive to tune + * @xferspeed: speed to configure + * + * Set a ATIIXP interface channel to the desired speeds. This involves + * requires the right timing data into the ATIIXP configuration space + * then setting the drive parameters appropriately + */ + +static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed) +{ + struct pci_dev *dev = drive->hwif->pci_dev; + unsigned long flags; + int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; + u32 tmp32; + u16 tmp16; + u8 speed, pio; + + speed = ide_rate_filter(atiixp_ratemask(drive), xferspeed); + + spin_lock_irqsave(&ide_lock, flags); + + save_mdma_mode[drive->dn] = 0; + if (speed >= XFER_UDMA_0) { + pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16); + tmp16 &= ~(0x07 << (drive->dn * 4)); + tmp16 |= ((speed & 0x07) << (drive->dn * 4)); + pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16); + } else { + if ((speed >= XFER_MW_DMA_0) && (speed <= XFER_MW_DMA_2)) { + save_mdma_mode[drive->dn] = speed; + pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32); + tmp32 &= ~(0xff << timing_shift); + tmp32 |= (mdma_timing[speed & 0x03].recover_width << timing_shift) | + (mdma_timing[speed & 0x03].command_width << (timing_shift + 4)); + pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32); + } + } + + spin_unlock_irqrestore(&ide_lock, flags); + + if (speed >= XFER_SW_DMA_0) + pio = atiixp_dma_2_pio(speed); + else + pio = speed - XFER_PIO_0; + + atiixp_tuneproc(drive, pio); + + return ide_config_drive_speed(drive, speed); +} + +/** + * atiixp_config_drive_for_dma - configure drive for DMA + * @drive: IDE drive to configure + * + * Set up a ATIIXP interface channel for the best available speed. + * We prefer UDMA if it is available and then MWDMA. If DMA is + * not available we switch to PIO and return 0. + */ + +static int atiixp_config_drive_for_dma(ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, atiixp_ratemask(drive)); + + /* If no DMA speed was available then disable DMA and use PIO. */ + if (!speed) { + u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL); + speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0; + } + + (void) atiixp_speedproc(drive, speed); + return ide_dma_enable(drive); +} + +/** + * atiixp_dma_check - set up an IDE device + * @drive: IDE drive to configure + * + * Set up the ATIIXP interface for the best available speed on this + * interface, preferring DMA to PIO. + */ + +static int atiixp_dma_check(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + u8 tspeed, speed; + + drive->init_speed = 0; + + if ((id->capability & 1) && drive->autodma) { + + if (ide_use_dma(drive)) { + if (atiixp_config_drive_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL); + speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0; + hwif->speedproc(drive, speed); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +/** + * init_hwif_atiixp - fill in the hwif for the ATIIXP + * @hwif: IDE interface + * + * Set up the ide_hwif_t for the ATIIXP interface according to the + * capabilities of the hardware. + */ + +static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) +{ + if (!hwif->irq) + hwif->irq = hwif->channel ? 15 : 14; + + hwif->autodma = 0; + hwif->tuneproc = &atiixp_tuneproc; + hwif->speedproc = &atiixp_speedproc; + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + + if (!hwif->dma_base) + return; + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x3f; + hwif->mwdma_mask = 0x06; + hwif->swdma_mask = 0x04; + + /* FIXME: proper cable detection needed */ + hwif->udma_four = 1; + hwif->ide_dma_host_on = &atiixp_ide_dma_host_on; + hwif->ide_dma_host_off = &atiixp_ide_dma_host_off; + hwif->ide_dma_check = &atiixp_dma_check; + if (!noautodma) + hwif->autodma = 1; + + hwif->drives[1].autodma = hwif->autodma; + hwif->drives[0].autodma = hwif->autodma; +} + +static ide_pci_device_t atiixp_pci_info[] __devinitdata = { + { /* 0 */ + .name = "ATIIXP", + .init_hwif = init_hwif_atiixp, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}}, + .bootable = ON_BOARD, + } +}; + +/** + * atiixp_init_one - called when a ATIIXP is found + * @dev: the atiixp device + * @id: the matching pci id + * + * Called when the PCI registration layer (or the IDE initialization) + * finds a device matching our IDE device tables. + */ + +static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &atiixp_pci_info[id->driver_data]); +} + +static struct pci_device_id atiixp_pci_tbl[] = { + { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl); + +static struct pci_driver driver = { + .name = "ATIIXP_IDE", + .id_table = atiixp_pci_tbl, + .probe = atiixp_init_one, +}; + +static int atiixp_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(atiixp_ide_init); + +MODULE_AUTHOR("HUI YU"); +MODULE_DESCRIPTION("PCI driver module for ATI IXP IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c new file mode 100644 index 0000000..92a2b7c --- /dev/null +++ b/drivers/ide/pci/cmd640.c @@ -0,0 +1,879 @@ +/* + * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996 + * + * Copyright (C) 1995-1996 Linus Torvalds & authors (see below) + */ + +/* + * Original authors: abramov@cecmow.enet.dec.com (Igor Abramov) + * mlord@pobox.com (Mark Lord) + * + * See linux/MAINTAINERS for address of current maintainer. + * + * This file provides support for the advanced features and bugs + * of IDE interfaces using the CMD Technologies 0640 IDE interface chip. + * + * These chips are basically fucked by design, and getting this driver + * to work on every motherboard design that uses this screwed chip seems + * bloody well impossible. However, we're still trying. + * + * Version 0.97 worked for everybody. + * + * User feedback is essential. Many thanks to the beta test team: + * + * A.Hartgers@stud.tue.nl, JZDQC@CUNYVM.CUNY.edu, abramov@cecmow.enet.dec.com, + * bardj@utopia.ppp.sn.no, bart@gaga.tue.nl, bbol001@cs.auckland.ac.nz, + * chrisc@dbass.demon.co.uk, dalecki@namu26.Num.Math.Uni-Goettingen.de, + * derekn@vw.ece.cmu.edu, florian@btp2x3.phy.uni-bayreuth.de, + * flynn@dei.unipd.it, gadio@netvision.net.il, godzilla@futuris.net, + * j@pobox.com, jkemp1@mises.uni-paderborn.de, jtoppe@hiwaay.net, + * kerouac@ssnet.com, meskes@informatik.rwth-aachen.de, hzoli@cs.elte.hu, + * peter@udgaard.isgtec.com, phil@tazenda.demon.co.uk, roadcapw@cfw.com, + * s0033las@sun10.vsz.bme.hu, schaffer@tam.cornell.edu, sjd@slip.net, + * steve@ei.org, ulrpeg@bigcomm.gun.de, ism@tardis.ed.ac.uk, mack@cray.com + * liug@mama.indstate.edu, and others. + * + * Version 0.01 Initial version, hacked out of ide.c, + * and #include'd rather than compiled separately. + * This will get cleaned up in a subsequent release. + * + * Version 0.02 Fixes for vlb initialization code, enable prefetch + * for versions 'B' and 'C' of chip by default, + * some code cleanup. + * + * Version 0.03 Added reset of secondary interface, + * and black list for devices which are not compatible + * with prefetch mode. Separate function for setting + * prefetch is added, possibly it will be called some + * day from ioctl processing code. + * + * Version 0.04 Now configs/compiles separate from ide.c + * + * Version 0.05 Major rewrite of interface timing code. + * Added new function cmd640_set_mode to set PIO mode + * from ioctl call. New drives added to black list. + * + * Version 0.06 More code cleanup. Prefetch is enabled only for + * detected hard drives, not included in prefetch + * black list. + * + * Version 0.07 Changed to more conservative drive tuning policy. + * Unknown drives, which report PIO < 4 are set to + * (reported_PIO - 1) if it is supported, or to PIO0. + * List of known drives extended by info provided by + * CMD at their ftp site. + * + * Version 0.08 Added autotune/noautotune support. + * + * Version 0.09 Try to be smarter about 2nd port enabling. + * Version 0.10 Be nice and don't reset 2nd port. + * Version 0.11 Try to handle more weird situations. + * + * Version 0.12 Lots of bug fixes from Laszlo Peter + * irq unmasking disabled for reliability. + * try to be even smarter about the second port. + * tidy up source code formatting. + * Version 0.13 permit irq unmasking again. + * Version 0.90 massive code cleanup, some bugs fixed. + * defaults all drives to PIO mode0, prefetch off. + * autotune is OFF by default, with compile time flag. + * prefetch can be turned OFF/ON using "hdparm -p8/-p9" + * (requires hdparm-3.1 or newer) + * Version 0.91 first release to linux-kernel list. + * Version 0.92 move initial reg dump to separate callable function + * change "readahead" to "prefetch" to avoid confusion + * Version 0.95 respect original BIOS timings unless autotuning. + * tons of code cleanup and rearrangement. + * added CONFIG_BLK_DEV_CMD640_ENHANCED option + * prevent use of unmask when prefetch is on + * Version 0.96 prevent use of io_32bit when prefetch is off + * Version 0.97 fix VLB secondary interface for sjd@slip.net + * other minor tune-ups: 0.96 was very good. + * Version 0.98 ignore PCI version when disabled by BIOS + * Version 0.99 display setup/active/recovery clocks with PIO mode + * Version 1.00 Mmm.. cannot depend on PCMD_ENA in all systems + * Version 1.01 slow/fast devsel can be selected with "hdparm -p6/-p7" + * ("fast" is necessary for 32bit I/O in some systems) + * Version 1.02 fix bug that resulted in slow "setup times" + * (patch courtesy of Zoltan Hidvegi) + */ + +#undef REALLY_SLOW_IO /* most systems can safely undef this */ +#define CMD640_PREFETCH_MASKS 1 + +//#define CMD640_DUMP_REGS + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/init.h> + +#include <asm/io.h> + +/* + * This flag is set in ide.c by the parameter: ide0=cmd640_vlb + */ +int cmd640_vlb = 0; + +/* + * CMD640 specific registers definition. + */ + +#define VID 0x00 +#define DID 0x02 +#define PCMD 0x04 +#define PCMD_ENA 0x01 +#define PSTTS 0x06 +#define REVID 0x08 +#define PROGIF 0x09 +#define SUBCL 0x0a +#define BASCL 0x0b +#define BaseA0 0x10 +#define BaseA1 0x14 +#define BaseA2 0x18 +#define BaseA3 0x1c +#define INTLINE 0x3c +#define INPINE 0x3d + +#define CFR 0x50 +#define CFR_DEVREV 0x03 +#define CFR_IDE01INTR 0x04 +#define CFR_DEVID 0x18 +#define CFR_AT_VESA_078h 0x20 +#define CFR_DSA1 0x40 +#define CFR_DSA0 0x80 + +#define CNTRL 0x51 +#define CNTRL_DIS_RA0 0x40 +#define CNTRL_DIS_RA1 0x80 +#define CNTRL_ENA_2ND 0x08 + +#define CMDTIM 0x52 +#define ARTTIM0 0x53 +#define DRWTIM0 0x54 +#define ARTTIM1 0x55 +#define DRWTIM1 0x56 +#define ARTTIM23 0x57 +#define ARTTIM23_DIS_RA2 0x04 +#define ARTTIM23_DIS_RA3 0x08 +#define DRWTIM23 0x58 +#define BRST 0x59 + +/* + * Registers and masks for easy access by drive index: + */ +static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23}; +static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3}; + +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + +static u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; +static u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23}; + +/* + * Current cmd640 timing values for each drive. + * The defaults for each are the slowest possible timings. + */ +static u8 setup_counts[4] = {4, 4, 4, 4}; /* Address setup count (in clocks) */ +static u8 active_counts[4] = {16, 16, 16, 16}; /* Active count (encoded) */ +static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */ + +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + +/* + * These are initialized to point at the devices we control + */ +static ide_hwif_t *cmd_hwif0, *cmd_hwif1; +static ide_drive_t *cmd_drives[4]; + +/* + * Interface to access cmd640x registers + */ +static unsigned int cmd640_key; +static void (*__put_cmd640_reg)(u16 reg, u8 val); +static u8 (*__get_cmd640_reg)(u16 reg); + +/* + * This is read from the CFR reg, and is used in several places. + */ +static unsigned int cmd640_chip_version; + +/* + * The CMD640x chip does not support DWORD config write cycles, but some + * of the BIOSes use them to implement the config services. + * Therefore, we must use direct IO instead. + */ + +/* PCI method 1 access */ + +static void put_cmd640_reg_pci1 (u16 reg, u8 val) +{ + outl_p((reg & 0xfc) | cmd640_key, 0xcf8); + outb_p(val, (reg & 3) | 0xcfc); +} + +static u8 get_cmd640_reg_pci1 (u16 reg) +{ + outl_p((reg & 0xfc) | cmd640_key, 0xcf8); + return inb_p((reg & 3) | 0xcfc); +} + +/* PCI method 2 access (from CMD datasheet) */ + +static void put_cmd640_reg_pci2 (u16 reg, u8 val) +{ + outb_p(0x10, 0xcf8); + outb_p(val, cmd640_key + reg); + outb_p(0, 0xcf8); +} + +static u8 get_cmd640_reg_pci2 (u16 reg) +{ + u8 b; + + outb_p(0x10, 0xcf8); + b = inb_p(cmd640_key + reg); + outb_p(0, 0xcf8); + return b; +} + +/* VLB access */ + +static void put_cmd640_reg_vlb (u16 reg, u8 val) +{ + outb_p(reg, cmd640_key); + outb_p(val, cmd640_key + 4); +} + +static u8 get_cmd640_reg_vlb (u16 reg) +{ + outb_p(reg, cmd640_key); + return inb_p(cmd640_key + 4); +} + +static u8 get_cmd640_reg(u16 reg) +{ + u8 b; + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + b = __get_cmd640_reg(reg); + spin_unlock_irqrestore(&ide_lock, flags); + return b; +} + +static void put_cmd640_reg(u16 reg, u8 val) +{ + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + __put_cmd640_reg(reg,val); + spin_unlock_irqrestore(&ide_lock, flags); +} + +static int __init match_pci_cmd640_device (void) +{ + const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06}; + unsigned int i; + for (i = 0; i < 4; i++) { + if (get_cmd640_reg(i) != ven_dev[i]) + return 0; + } +#ifdef STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT + if ((get_cmd640_reg(PCMD) & PCMD_ENA) == 0) { + printk("ide: cmd640 on PCI disabled by BIOS\n"); + return 0; + } +#endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */ + return 1; /* success */ +} + +/* + * Probe for CMD640x -- pci method 1 + */ +static int __init probe_for_cmd640_pci1 (void) +{ + __get_cmd640_reg = get_cmd640_reg_pci1; + __put_cmd640_reg = put_cmd640_reg_pci1; + for (cmd640_key = 0x80000000; + cmd640_key <= 0x8000f800; + cmd640_key += 0x800) { + if (match_pci_cmd640_device()) + return 1; /* success */ + } + return 0; +} + +/* + * Probe for CMD640x -- pci method 2 + */ +static int __init probe_for_cmd640_pci2 (void) +{ + __get_cmd640_reg = get_cmd640_reg_pci2; + __put_cmd640_reg = put_cmd640_reg_pci2; + for (cmd640_key = 0xc000; cmd640_key <= 0xcf00; cmd640_key += 0x100) { + if (match_pci_cmd640_device()) + return 1; /* success */ + } + return 0; +} + +/* + * Probe for CMD640x -- vlb + */ +static int __init probe_for_cmd640_vlb (void) +{ + u8 b; + + __get_cmd640_reg = get_cmd640_reg_vlb; + __put_cmd640_reg = put_cmd640_reg_vlb; + cmd640_key = 0x178; + b = get_cmd640_reg(CFR); + if (b == 0xff || b == 0x00 || (b & CFR_AT_VESA_078h)) { + cmd640_key = 0x78; + b = get_cmd640_reg(CFR); + if (b == 0xff || b == 0x00 || !(b & CFR_AT_VESA_078h)) + return 0; + } + return 1; /* success */ +} + +/* + * Returns 1 if an IDE interface/drive exists at 0x170, + * Returns 0 otherwise. + */ +static int __init secondary_port_responding (void) +{ + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + + outb_p(0x0a, 0x170 + IDE_SELECT_OFFSET); /* select drive0 */ + udelay(100); + if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x0a) { + outb_p(0x1a, 0x170 + IDE_SELECT_OFFSET); /* select drive1 */ + udelay(100); + if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x1a) { + spin_unlock_irqrestore(&ide_lock, flags); + return 0; /* nothing responded */ + } + } + spin_unlock_irqrestore(&ide_lock, flags); + return 1; /* success */ +} + +#ifdef CMD640_DUMP_REGS +/* + * Dump out all cmd640 registers. May be called from ide.c + */ +static void cmd640_dump_regs (void) +{ + unsigned int reg = cmd640_vlb ? 0x50 : 0x00; + + /* Dump current state of chip registers */ + printk("ide: cmd640 internal register dump:"); + for (; reg <= 0x59; reg++) { + if (!(reg & 0x0f)) + printk("\n%04x:", reg); + printk(" %02x", get_cmd640_reg(reg)); + } + printk("\n"); +} +#endif + +/* + * Check whether prefetch is on for a drive, + * and initialize the unmask flags for safe operation. + */ +static void __init check_prefetch (unsigned int index) +{ + ide_drive_t *drive = cmd_drives[index]; + u8 b = get_cmd640_reg(prefetch_regs[index]); + + if (b & prefetch_masks[index]) { /* is prefetch off? */ + drive->no_unmask = 0; + drive->no_io_32bit = 1; + drive->io_32bit = 0; + } else { +#if CMD640_PREFETCH_MASKS + drive->no_unmask = 1; + drive->unmask = 0; +#endif + drive->no_io_32bit = 0; + } +} + +/* + * Figure out which devices we control + */ +static void __init setup_device_ptrs (void) +{ + unsigned int i; + + cmd_hwif0 = &ide_hwifs[0]; /* default, if not found below */ + cmd_hwif1 = &ide_hwifs[1]; /* default, if not found below */ + for (i = 0; i < MAX_HWIFS; i++) { + ide_hwif_t *hwif = &ide_hwifs[i]; + if (hwif->chipset == ide_unknown || hwif->chipset == ide_forced) { + if (hwif->io_ports[IDE_DATA_OFFSET] == 0x1f0) + cmd_hwif0 = hwif; + else if (hwif->io_ports[IDE_DATA_OFFSET] == 0x170) + cmd_hwif1 = hwif; + } + } + cmd_drives[0] = &cmd_hwif0->drives[0]; + cmd_drives[1] = &cmd_hwif0->drives[1]; + cmd_drives[2] = &cmd_hwif1->drives[0]; + cmd_drives[3] = &cmd_hwif1->drives[1]; +} + +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + +/* + * Sets prefetch mode for a drive. + */ +static void set_prefetch_mode (unsigned int index, int mode) +{ + ide_drive_t *drive = cmd_drives[index]; + int reg = prefetch_regs[index]; + u8 b; + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + b = __get_cmd640_reg(reg); + if (mode) { /* want prefetch on? */ +#if CMD640_PREFETCH_MASKS + drive->no_unmask = 1; + drive->unmask = 0; +#endif + drive->no_io_32bit = 0; + b &= ~prefetch_masks[index]; /* enable prefetch */ + } else { + drive->no_unmask = 0; + drive->no_io_32bit = 1; + drive->io_32bit = 0; + b |= prefetch_masks[index]; /* disable prefetch */ + } + __put_cmd640_reg(reg, b); + spin_unlock_irqrestore(&ide_lock, flags); +} + +/* + * Dump out current drive clocks settings + */ +static void display_clocks (unsigned int index) +{ + u8 active_count, recovery_count; + + active_count = active_counts[index]; + if (active_count == 1) + ++active_count; + recovery_count = recovery_counts[index]; + if (active_count > 3 && recovery_count == 1) + ++recovery_count; + if (cmd640_chip_version > 1) + recovery_count += 1; /* cmd640b uses (count + 1)*/ + printk(", clocks=%d/%d/%d\n", setup_counts[index], active_count, recovery_count); +} + +/* + * Pack active and recovery counts into single byte representation + * used by controller + */ +inline static u8 pack_nibbles (u8 upper, u8 lower) +{ + return ((upper & 0x0f) << 4) | (lower & 0x0f); +} + +/* + * This routine retrieves the initial drive timings from the chipset. + */ +static void __init retrieve_drive_counts (unsigned int index) +{ + u8 b; + + /* + * Get the internal setup timing, and convert to clock count + */ + b = get_cmd640_reg(arttim_regs[index]) & ~0x3f; + switch (b) { + case 0x00: b = 4; break; + case 0x80: b = 3; break; + case 0x40: b = 2; break; + default: b = 5; break; + } + setup_counts[index] = b; + + /* + * Get the active/recovery counts + */ + b = get_cmd640_reg(drwtim_regs[index]); + active_counts[index] = (b >> 4) ? (b >> 4) : 0x10; + recovery_counts[index] = (b & 0x0f) ? (b & 0x0f) : 0x10; +} + + +/* + * This routine writes the prepared setup/active/recovery counts + * for a drive into the cmd640 chipset registers to active them. + */ +static void program_drive_counts (unsigned int index) +{ + unsigned long flags; + u8 setup_count = setup_counts[index]; + u8 active_count = active_counts[index]; + u8 recovery_count = recovery_counts[index]; + + /* + * Set up address setup count and drive read/write timing registers. + * Primary interface has individual count/timing registers for + * each drive. Secondary interface has one common set of registers, + * so we merge the timings, using the slowest value for each timing. + */ + if (index > 1) { + unsigned int mate; + if (cmd_drives[mate = index ^ 1]->present) { + if (setup_count < setup_counts[mate]) + setup_count = setup_counts[mate]; + if (active_count < active_counts[mate]) + active_count = active_counts[mate]; + if (recovery_count < recovery_counts[mate]) + recovery_count = recovery_counts[mate]; + } + } + + /* + * Convert setup_count to internal chipset representation + */ + switch (setup_count) { + case 4: setup_count = 0x00; break; + case 3: setup_count = 0x80; break; + case 1: + case 2: setup_count = 0x40; break; + default: setup_count = 0xc0; /* case 5 */ + } + + /* + * Now that everything is ready, program the new timings + */ + spin_lock_irqsave(&ide_lock, flags); + /* + * Program the address_setup clocks into ARTTIM reg, + * and then the active/recovery counts into the DRWTIM reg + * (this converts counts of 16 into counts of zero -- okay). + */ + setup_count |= __get_cmd640_reg(arttim_regs[index]) & 0x3f; + __put_cmd640_reg(arttim_regs[index], setup_count); + __put_cmd640_reg(drwtim_regs[index], pack_nibbles(active_count, recovery_count)); + spin_unlock_irqrestore(&ide_lock, flags); +} + +/* + * Set a specific pio_mode for a drive + */ +static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle_time) +{ + int setup_time, active_time, recovery_time, clock_time; + u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count; + int bus_speed = system_bus_clock(); + + if (pio_mode > 5) + pio_mode = 5; + setup_time = ide_pio_timings[pio_mode].setup_time; + active_time = ide_pio_timings[pio_mode].active_time; + recovery_time = cycle_time - (setup_time + active_time); + clock_time = 1000 / bus_speed; + cycle_count = (cycle_time + clock_time - 1) / clock_time; + + setup_count = (setup_time + clock_time - 1) / clock_time; + + active_count = (active_time + clock_time - 1) / clock_time; + if (active_count < 2) + active_count = 2; /* minimum allowed by cmd640 */ + + recovery_count = (recovery_time + clock_time - 1) / clock_time; + recovery_count2 = cycle_count - (setup_count + active_count); + if (recovery_count2 > recovery_count) + recovery_count = recovery_count2; + if (recovery_count < 2) + recovery_count = 2; /* minimum allowed by cmd640 */ + if (recovery_count > 17) { + active_count += recovery_count - 17; + recovery_count = 17; + } + if (active_count > 16) + active_count = 16; /* maximum allowed by cmd640 */ + if (cmd640_chip_version > 1) + recovery_count -= 1; /* cmd640b uses (count + 1)*/ + if (recovery_count > 16) + recovery_count = 16; /* maximum allowed by cmd640 */ + + setup_counts[index] = setup_count; + active_counts[index] = active_count; + recovery_counts[index] = recovery_count; + + /* + * In a perfect world, we might set the drive pio mode here + * (using WIN_SETFEATURE) before continuing. + * + * But we do not, because: + * 1) this is the wrong place to do it (proper is do_special() in ide.c) + * 2) in practice this is rarely, if ever, necessary + */ + program_drive_counts (index); +} + +/* + * Drive PIO mode selection: + */ +static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted) +{ + u8 b; + ide_pio_data_t d; + unsigned int index = 0; + + while (drive != cmd_drives[index]) { + if (++index > 3) { + printk("%s: bad news in cmd640_tune_drive\n", drive->name); + return; + } + } + switch (mode_wanted) { + case 6: /* set fast-devsel off */ + case 7: /* set fast-devsel on */ + mode_wanted &= 1; + b = get_cmd640_reg(CNTRL) & ~0x27; + if (mode_wanted) + b |= 0x27; + put_cmd640_reg(CNTRL, b); + printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, mode_wanted ? "en" : "dis"); + return; + + case 8: /* set prefetch off */ + case 9: /* set prefetch on */ + mode_wanted &= 1; + set_prefetch_mode(index, mode_wanted); + printk("%s: %sabled cmd640 prefetch\n", drive->name, mode_wanted ? "en" : "dis"); + return; + } + + (void) ide_get_best_pio_mode (drive, mode_wanted, 5, &d); + cmd640_set_mode (index, d.pio_mode, d.cycle_time); + + printk ("%s: selected cmd640 PIO mode%d (%dns)%s", + drive->name, + d.pio_mode, + d.cycle_time, + d.overridden ? " (overriding vendor mode)" : ""); + display_clocks(index); + return; +} + +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + +static int pci_conf1(void) +{ + u32 tmp; + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + outb(0x01, 0xCFB); + tmp = inl(0xCF8); + outl(0x80000000, 0xCF8); + if (inl(0xCF8) == 0x80000000) { + outl(tmp, 0xCF8); + spin_unlock_irqrestore(&ide_lock, flags); + return 1; + } + outl(tmp, 0xCF8); + spin_unlock_irqrestore(&ide_lock, flags); + return 0; +} + +static int pci_conf2(void) +{ + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + outb(0x00, 0xCFB); + outb(0x00, 0xCF8); + outb(0x00, 0xCFA); + if (inb(0xCF8) == 0x00 && inb(0xCF8) == 0x00) { + spin_unlock_irqrestore(&ide_lock, flags); + return 1; + } + spin_unlock_irqrestore(&ide_lock, flags); + return 0; +} + +/* + * Probe for a cmd640 chipset, and initialize it if found. Called from ide.c + */ +int __init ide_probe_for_cmd640x (void) +{ +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + int second_port_toggled = 0; +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + int second_port_cmd640 = 0; + const char *bus_type, *port2; + unsigned int index; + u8 b, cfr; + + if (cmd640_vlb && probe_for_cmd640_vlb()) { + bus_type = "VLB"; + } else { + cmd640_vlb = 0; + /* Find out what kind of PCI probing is supported otherwise + Justin Gibbs will sulk.. */ + if (pci_conf1() && probe_for_cmd640_pci1()) + bus_type = "PCI (type1)"; + else if (pci_conf2() && probe_for_cmd640_pci2()) + bus_type = "PCI (type2)"; + else + return 0; + } + /* + * Undocumented magic (there is no 0x5b reg in specs) + */ + put_cmd640_reg(0x5b, 0xbd); + if (get_cmd640_reg(0x5b) != 0xbd) { + printk(KERN_ERR "ide: cmd640 init failed: wrong value in reg 0x5b\n"); + return 0; + } + put_cmd640_reg(0x5b, 0); + +#ifdef CMD640_DUMP_REGS + cmd640_dump_regs(); +#endif + + /* + * Documented magic begins here + */ + cfr = get_cmd640_reg(CFR); + cmd640_chip_version = cfr & CFR_DEVREV; + if (cmd640_chip_version == 0) { + printk ("ide: bad cmd640 revision: %d\n", cmd640_chip_version); + return 0; + } + + /* + * Initialize data for primary port + */ + setup_device_ptrs (); + printk("%s: buggy cmd640%c interface on %s, config=0x%02x\n", + cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr); + cmd_hwif0->chipset = ide_cmd640; +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + cmd_hwif0->tuneproc = &cmd640_tune_drive; +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + + /* + * Ensure compatibility by always using the slowest timings + * for access to the drive's command register block, + * and reset the prefetch burstsize to default (512 bytes). + * + * Maybe we need a way to NOT do these on *some* systems? + */ + put_cmd640_reg(CMDTIM, 0); + put_cmd640_reg(BRST, 0x40); + + /* + * Try to enable the secondary interface, if not already enabled + */ + if (cmd_hwif1->noprobe) { + port2 = "not probed"; + } else { + b = get_cmd640_reg(CNTRL); + if (secondary_port_responding()) { + if ((b & CNTRL_ENA_2ND)) { + second_port_cmd640 = 1; + port2 = "okay"; + } else if (cmd640_vlb) { + second_port_cmd640 = 1; + port2 = "alive"; + } else + port2 = "not cmd640"; + } else { + put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */ + if (secondary_port_responding()) { + second_port_cmd640 = 1; +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + second_port_toggled = 1; +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + port2 = "enabled"; + } else { + put_cmd640_reg(CNTRL, b); /* restore original setting */ + port2 = "not responding"; + } + } + } + + /* + * Initialize data for secondary cmd640 port, if enabled + */ + if (second_port_cmd640) { + cmd_hwif0->serialized = 1; + cmd_hwif1->serialized = 1; + cmd_hwif1->chipset = ide_cmd640; + cmd_hwif0->mate = cmd_hwif1; + cmd_hwif1->mate = cmd_hwif0; + cmd_hwif1->channel = 1; +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + cmd_hwif1->tuneproc = &cmd640_tune_drive; +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + } + printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name, + cmd_hwif0->serialized ? "" : "not ", port2); + + /* + * Establish initial timings/prefetch for all drives. + * Do not unnecessarily disturb any prior BIOS setup of these. + */ + for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) { + ide_drive_t *drive = cmd_drives[index]; +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + if (drive->autotune || ((index > 1) && second_port_toggled)) { + /* + * Reset timing to the slowest speed and turn off prefetch. + * This way, the drive identify code has a better chance. + */ + setup_counts [index] = 4; /* max possible */ + active_counts [index] = 16; /* max possible */ + recovery_counts [index] = 16; /* max possible */ + program_drive_counts (index); + set_prefetch_mode (index, 0); + printk("cmd640: drive%d timings/prefetch cleared\n", index); + } else { + /* + * Record timings/prefetch without changing them. + * This preserves any prior BIOS setup. + */ + retrieve_drive_counts (index); + check_prefetch (index); + printk("cmd640: drive%d timings/prefetch(%s) preserved", + index, drive->no_io_32bit ? "off" : "on"); + display_clocks(index); + } +#else + /* + * Set the drive unmask flags to match the prefetch setting + */ + check_prefetch (index); + printk("cmd640: drive%d timings/prefetch(%s) preserved\n", + index, drive->no_io_32bit ? "off" : "on"); +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + } + +#ifdef CMD640_DUMP_REGS + cmd640_dump_regs(); +#endif + return 1; +} + diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c new file mode 100644 index 0000000..3de9ab8 --- /dev/null +++ b/drivers/ide/pci/cmd64x.c @@ -0,0 +1,821 @@ +/* $Id: cmd64x.c,v 1.21 2000/01/30 23:23:16 + * + * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 + * + * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines. + * Note, this driver is not used at all on other systems because + * there the "BIOS" has done all of the following already. + * Due to massive hardware bugs, UltraDMA is only supported + * on the 646U2 and not on the 646U. + * + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 1998 David S. Miller (davem@redhat.com) + * + * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/init.h> + +#include <asm/io.h> + +#define DISPLAY_CMD64X_TIMINGS + +#define CMD_DEBUG 0 + +#if CMD_DEBUG +#define cmdprintk(x...) printk(x) +#else +#define cmdprintk(x...) +#endif + +/* + * CMD64x specific registers definition. + */ +#define CFR 0x50 +#define CFR_INTR_CH0 0x02 +#define CNTRL 0x51 +#define CNTRL_DIS_RA0 0x40 +#define CNTRL_DIS_RA1 0x80 +#define CNTRL_ENA_2ND 0x08 + +#define CMDTIM 0x52 +#define ARTTIM0 0x53 +#define DRWTIM0 0x54 +#define ARTTIM1 0x55 +#define DRWTIM1 0x56 +#define ARTTIM23 0x57 +#define ARTTIM23_DIS_RA2 0x04 +#define ARTTIM23_DIS_RA3 0x08 +#define ARTTIM23_INTR_CH1 0x10 +#define ARTTIM2 0x57 +#define ARTTIM3 0x57 +#define DRWTIM23 0x58 +#define DRWTIM2 0x58 +#define BRST 0x59 +#define DRWTIM3 0x5b + +#define BMIDECR0 0x70 +#define MRDMODE 0x71 +#define MRDMODE_INTR_CH0 0x04 +#define MRDMODE_INTR_CH1 0x08 +#define MRDMODE_BLK_CH0 0x10 +#define MRDMODE_BLK_CH1 0x20 +#define BMIDESR0 0x72 +#define UDIDETCR0 0x73 +#define DTPR0 0x74 +#define BMIDECR1 0x78 +#define BMIDECSR 0x79 +#define BMIDESR1 0x7A +#define UDIDETCR1 0x7B +#define DTPR1 0x7C + +#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) +#include <linux/stat.h> +#include <linux/proc_fs.h> + +static u8 cmd64x_proc = 0; + +#define CMD_MAX_DEVS 5 + +static struct pci_dev *cmd_devs[CMD_MAX_DEVS]; +static int n_cmd_devs; + +static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index) +{ + char *p = buf; + + u8 reg53 = 0, reg54 = 0, reg55 = 0, reg56 = 0; /* primary */ + u8 reg57 = 0, reg58 = 0, reg5b; /* secondary */ + u8 reg72 = 0, reg73 = 0; /* primary */ + u8 reg7a = 0, reg7b = 0; /* secondary */ + u8 reg50 = 0, reg71 = 0; /* extra */ + + p += sprintf(p, "\nController: %d\n", index); + p += sprintf(p, "CMD%x Chipset.\n", dev->device); + (void) pci_read_config_byte(dev, CFR, ®50); + (void) pci_read_config_byte(dev, ARTTIM0, ®53); + (void) pci_read_config_byte(dev, DRWTIM0, ®54); + (void) pci_read_config_byte(dev, ARTTIM1, ®55); + (void) pci_read_config_byte(dev, DRWTIM1, ®56); + (void) pci_read_config_byte(dev, ARTTIM2, ®57); + (void) pci_read_config_byte(dev, DRWTIM2, ®58); + (void) pci_read_config_byte(dev, DRWTIM3, ®5b); + (void) pci_read_config_byte(dev, MRDMODE, ®71); + (void) pci_read_config_byte(dev, BMIDESR0, ®72); + (void) pci_read_config_byte(dev, UDIDETCR0, ®73); + (void) pci_read_config_byte(dev, BMIDESR1, ®7a); + (void) pci_read_config_byte(dev, UDIDETCR1, ®7b); + + p += sprintf(p, "--------------- Primary Channel " + "---------------- Secondary Channel " + "-------------\n"); + p += sprintf(p, " %sabled " + " %sabled\n", + (reg72&0x80)?"dis":" en", + (reg7a&0x80)?"dis":" en"); + p += sprintf(p, "--------------- drive0 " + "--------- drive1 -------- drive0 " + "---------- drive1 ------\n"); + p += sprintf(p, "DMA enabled: %s %s" + " %s %s\n", + (reg72&0x20)?"yes":"no ", (reg72&0x40)?"yes":"no ", + (reg7a&0x20)?"yes":"no ", (reg7a&0x40)?"yes":"no "); + + p += sprintf(p, "DMA Mode: %s(%s) %s(%s)", + (reg72&0x20)?((reg73&0x01)?"UDMA":" DMA"):" PIO", + (reg72&0x20)?( + ((reg73&0x30)==0x30)?(((reg73&0x35)==0x35)?"3":"0"): + ((reg73&0x20)==0x20)?(((reg73&0x25)==0x25)?"3":"1"): + ((reg73&0x10)==0x10)?(((reg73&0x15)==0x15)?"4":"2"): + ((reg73&0x00)==0x00)?(((reg73&0x05)==0x05)?"5":"2"): + "X"):"?", + (reg72&0x40)?((reg73&0x02)?"UDMA":" DMA"):" PIO", + (reg72&0x40)?( + ((reg73&0xC0)==0xC0)?(((reg73&0xC5)==0xC5)?"3":"0"): + ((reg73&0x80)==0x80)?(((reg73&0x85)==0x85)?"3":"1"): + ((reg73&0x40)==0x40)?(((reg73&0x4A)==0x4A)?"4":"2"): + ((reg73&0x00)==0x00)?(((reg73&0x0A)==0x0A)?"5":"2"): + "X"):"?"); + p += sprintf(p, " %s(%s) %s(%s)\n", + (reg7a&0x20)?((reg7b&0x01)?"UDMA":" DMA"):" PIO", + (reg7a&0x20)?( + ((reg7b&0x30)==0x30)?(((reg7b&0x35)==0x35)?"3":"0"): + ((reg7b&0x20)==0x20)?(((reg7b&0x25)==0x25)?"3":"1"): + ((reg7b&0x10)==0x10)?(((reg7b&0x15)==0x15)?"4":"2"): + ((reg7b&0x00)==0x00)?(((reg7b&0x05)==0x05)?"5":"2"): + "X"):"?", + (reg7a&0x40)?((reg7b&0x02)?"UDMA":" DMA"):" PIO", + (reg7a&0x40)?( + ((reg7b&0xC0)==0xC0)?(((reg7b&0xC5)==0xC5)?"3":"0"): + ((reg7b&0x80)==0x80)?(((reg7b&0x85)==0x85)?"3":"1"): + ((reg7b&0x40)==0x40)?(((reg7b&0x4A)==0x4A)?"4":"2"): + ((reg7b&0x00)==0x00)?(((reg7b&0x0A)==0x0A)?"5":"2"): + "X"):"?" ); + p += sprintf(p, "PIO Mode: %s %s" + " %s %s\n", + "?", "?", "?", "?"); + p += sprintf(p, " %s %s\n", + (reg50 & CFR_INTR_CH0) ? "interrupting" : "polling ", + (reg57 & ARTTIM23_INTR_CH1) ? "interrupting" : "polling"); + p += sprintf(p, " %s %s\n", + (reg71 & MRDMODE_INTR_CH0) ? "pending" : "clear ", + (reg71 & MRDMODE_INTR_CH1) ? "pending" : "clear"); + p += sprintf(p, " %s %s\n", + (reg71 & MRDMODE_BLK_CH0) ? "blocked" : "enabled", + (reg71 & MRDMODE_BLK_CH1) ? "blocked" : "enabled"); + + return (char *)p; +} + +static int cmd64x_get_info (char *buffer, char **addr, off_t offset, int count) +{ + char *p = buffer; + int i; + + p += sprintf(p, "\n"); + for (i = 0; i < n_cmd_devs; i++) { + struct pci_dev *dev = cmd_devs[i]; + p = print_cmd64x_get_info(p, dev, i); + } + return p-buffer; /* => must be less than 4k! */ +} + +#endif /* defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) */ + +/* + * Registers and masks for easy access by drive index: + */ +#if 0 +static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23}; +static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3}; +#endif + +/* + * This routine writes the prepared setup/active/recovery counts + * for a drive into the cmd646 chipset registers to active them. + */ +static void program_drive_counts (ide_drive_t *drive, int setup_count, int active_count, int recovery_count) +{ + unsigned long flags; + struct pci_dev *dev = HWIF(drive)->pci_dev; + ide_drive_t *drives = HWIF(drive)->drives; + u8 temp_b; + static const u8 setup_counts[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; + static const u8 recovery_counts[] = + {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; + static const u8 arttim_regs[2][2] = { + { ARTTIM0, ARTTIM1 }, + { ARTTIM23, ARTTIM23 } + }; + static const u8 drwtim_regs[2][2] = { + { DRWTIM0, DRWTIM1 }, + { DRWTIM2, DRWTIM3 } + }; + int channel = (int) HWIF(drive)->channel; + int slave = (drives != drive); /* Is this really the best way to determine this?? */ + + cmdprintk("program_drive_count parameters = s(%d),a(%d),r(%d),p(%d)\n", + setup_count, active_count, recovery_count, drive->present); + /* + * Set up address setup count registers. + * Primary interface has individual count/timing registers for + * each drive. Secondary interface has one common set of registers, + * for address setup so we merge these timings, using the slowest + * value. + */ + if (channel) { + drive->drive_data = setup_count; + setup_count = max(drives[0].drive_data, + drives[1].drive_data); + cmdprintk("Secondary interface, setup_count = %d\n", + setup_count); + } + + /* + * Convert values to internal chipset representation + */ + setup_count = (setup_count > 5) ? 0xc0 : (int) setup_counts[setup_count]; + active_count &= 0xf; /* Remember, max value is 16 */ + recovery_count = (int) recovery_counts[recovery_count]; + + cmdprintk("Final values = %d,%d,%d\n", + setup_count, active_count, recovery_count); + + /* + * Now that everything is ready, program the new timings + */ + local_irq_save(flags); + /* + * Program the address_setup clocks into ARTTIM reg, + * and then the active/recovery counts into the DRWTIM reg + */ + (void) pci_read_config_byte(dev, arttim_regs[channel][slave], &temp_b); + (void) pci_write_config_byte(dev, arttim_regs[channel][slave], + ((u8) setup_count) | (temp_b & 0x3f)); + (void) pci_write_config_byte(dev, drwtim_regs[channel][slave], + (u8) ((active_count << 4) | recovery_count)); + cmdprintk ("Write %x to %x\n", + ((u8) setup_count) | (temp_b & 0x3f), + arttim_regs[channel][slave]); + cmdprintk ("Write %x to %x\n", + (u8) ((active_count << 4) | recovery_count), + drwtim_regs[channel][slave]); + local_irq_restore(flags); +} + +/* + * Attempts to set the interface PIO mode. + * The preferred method of selecting PIO modes (e.g. mode 4) is + * "echo 'piomode:4' > /proc/ide/hdx/settings". Special cases are + * 8: prefetch off, 9: prefetch on, 255: auto-select best mode. + * Called with 255 at boot time. + */ + +static void cmd64x_tuneproc (ide_drive_t *drive, u8 mode_wanted) +{ + int setup_time, active_time, recovery_time; + int clock_time, pio_mode, cycle_time; + u8 recovery_count2, cycle_count; + int setup_count, active_count, recovery_count; + int bus_speed = system_bus_clock(); + /*byte b;*/ + ide_pio_data_t d; + + switch (mode_wanted) { + case 8: /* set prefetch off */ + case 9: /* set prefetch on */ + mode_wanted &= 1; + /*set_prefetch_mode(index, mode_wanted);*/ + cmdprintk("%s: %sabled cmd640 prefetch\n", + drive->name, mode_wanted ? "en" : "dis"); + return; + } + + mode_wanted = ide_get_best_pio_mode (drive, mode_wanted, 5, &d); + pio_mode = d.pio_mode; + cycle_time = d.cycle_time; + + /* + * I copied all this complicated stuff from cmd640.c and made a few + * minor changes. For now I am just going to pray that it is correct. + */ + if (pio_mode > 5) + pio_mode = 5; + setup_time = ide_pio_timings[pio_mode].setup_time; + active_time = ide_pio_timings[pio_mode].active_time; + recovery_time = cycle_time - (setup_time + active_time); + clock_time = 1000 / bus_speed; + cycle_count = (cycle_time + clock_time - 1) / clock_time; + + setup_count = (setup_time + clock_time - 1) / clock_time; + + active_count = (active_time + clock_time - 1) / clock_time; + + recovery_count = (recovery_time + clock_time - 1) / clock_time; + recovery_count2 = cycle_count - (setup_count + active_count); + if (recovery_count2 > recovery_count) + recovery_count = recovery_count2; + if (recovery_count > 16) { + active_count += recovery_count - 16; + recovery_count = 16; + } + if (active_count > 16) + active_count = 16; /* maximum allowed by cmd646 */ + + /* + * In a perfect world, we might set the drive pio mode here + * (using WIN_SETFEATURE) before continuing. + * + * But we do not, because: + * 1) this is the wrong place to do it + * (proper is do_special() in ide.c) + * 2) in practice this is rarely, if ever, necessary + */ + program_drive_counts (drive, setup_count, active_count, recovery_count); + + cmdprintk("%s: selected cmd646 PIO mode%d : %d (%dns)%s, " + "clocks=%d/%d/%d\n", + drive->name, pio_mode, mode_wanted, cycle_time, + d.overridden ? " (overriding vendor mode)" : "", + setup_count, active_count, recovery_count); +} + +static u8 cmd64x_ratemask (ide_drive_t *drive) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + u8 mode = 0; + + switch(dev->device) { + case PCI_DEVICE_ID_CMD_649: + mode = 3; + break; + case PCI_DEVICE_ID_CMD_648: + mode = 2; + break; + case PCI_DEVICE_ID_CMD_643: + return 0; + + case PCI_DEVICE_ID_CMD_646: + { + unsigned int class_rev = 0; + pci_read_config_dword(dev, + PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + /* + * UltraDMA only supported on PCI646U and PCI646U2, which + * correspond to revisions 0x03, 0x05 and 0x07 respectively. + * Actually, although the CMD tech support people won't + * tell me the details, the 0x03 revision cannot support + * UDMA correctly without hardware modifications, and even + * then it only works with Quantum disks due to some + * hold time assumptions in the 646U part which are fixed + * in the 646U2. + * + * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. + */ + switch(class_rev) { + case 0x07: + case 0x05: + return 1; + case 0x03: + case 0x01: + default: + return 0; + } + } + } + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + return mode; +} + +static void config_cmd64x_chipset_for_pio (ide_drive_t *drive, u8 set_speed) +{ + u8 speed = 0x00; + u8 set_pio = ide_get_best_pio_mode(drive, 4, 5, NULL); + + cmd64x_tuneproc(drive, set_pio); + speed = XFER_PIO_0 + set_pio; + if (set_speed) + (void) ide_config_drive_speed(drive, speed); +} + +static void config_chipset_for_pio (ide_drive_t *drive, u8 set_speed) +{ + config_cmd64x_chipset_for_pio(drive, set_speed); +} + +static int cmd64x_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + + u8 unit = (drive->select.b.unit & 0x01); + u8 regU = 0, pciU = (hwif->channel) ? UDIDETCR1 : UDIDETCR0; + u8 regD = 0, pciD = (hwif->channel) ? BMIDESR1 : BMIDESR0; + + u8 speed = ide_rate_filter(cmd64x_ratemask(drive), xferspeed); + + if (speed > XFER_PIO_4) { + (void) pci_read_config_byte(dev, pciD, ®D); + (void) pci_read_config_byte(dev, pciU, ®U); + regD &= ~(unit ? 0x40 : 0x20); + regU &= ~(unit ? 0xCA : 0x35); + (void) pci_write_config_byte(dev, pciD, regD); + (void) pci_write_config_byte(dev, pciU, regU); + (void) pci_read_config_byte(dev, pciD, ®D); + (void) pci_read_config_byte(dev, pciU, ®U); + } + + switch(speed) { + case XFER_UDMA_5: regU |= (unit ? 0x0A : 0x05); break; + case XFER_UDMA_4: regU |= (unit ? 0x4A : 0x15); break; + case XFER_UDMA_3: regU |= (unit ? 0x8A : 0x25); break; + case XFER_UDMA_2: regU |= (unit ? 0x42 : 0x11); break; + case XFER_UDMA_1: regU |= (unit ? 0x82 : 0x21); break; + case XFER_UDMA_0: regU |= (unit ? 0xC2 : 0x31); break; + case XFER_MW_DMA_2: regD |= (unit ? 0x40 : 0x10); break; + case XFER_MW_DMA_1: regD |= (unit ? 0x80 : 0x20); break; + case XFER_MW_DMA_0: regD |= (unit ? 0xC0 : 0x30); break; + case XFER_SW_DMA_2: regD |= (unit ? 0x40 : 0x10); break; + case XFER_SW_DMA_1: regD |= (unit ? 0x80 : 0x20); break; + case XFER_SW_DMA_0: regD |= (unit ? 0xC0 : 0x30); break; + case XFER_PIO_4: cmd64x_tuneproc(drive, 4); break; + case XFER_PIO_3: cmd64x_tuneproc(drive, 3); break; + case XFER_PIO_2: cmd64x_tuneproc(drive, 2); break; + case XFER_PIO_1: cmd64x_tuneproc(drive, 1); break; + case XFER_PIO_0: cmd64x_tuneproc(drive, 0); break; + + default: + return 1; + } + + if (speed > XFER_PIO_4) { + (void) pci_write_config_byte(dev, pciU, regU); + regD |= (unit ? 0x40 : 0x20); + (void) pci_write_config_byte(dev, pciD, regD); + } + + return (ide_config_drive_speed(drive, speed)); +} + +static int config_chipset_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, cmd64x_ratemask(drive)); + + config_chipset_for_pio(drive, !speed); + + if (!speed) + return 0; + + if(ide_set_xfer_rate(drive, speed)) + return 0; + + if (!drive->init_speed) + drive->init_speed = speed; + + return ide_dma_enable(drive); +} + +static int cmd64x_config_drive_for_dma (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + if ((id != NULL) && ((id->capability & 1) != 0) && drive->autodma) { + + if (ide_use_dma(drive)) { + if (config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + config_chipset_for_pio(drive, 1); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +static int cmd64x_alt_dma_status (struct pci_dev *dev) +{ + switch(dev->device) { + case PCI_DEVICE_ID_CMD_648: + case PCI_DEVICE_ID_CMD_649: + return 1; + default: + break; + } + return 0; +} + +static int cmd64x_ide_dma_end (ide_drive_t *drive) +{ + u8 dma_stat = 0, dma_cmd = 0; + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + + drive->waiting_for_dma = 0; + /* read DMA command state */ + dma_cmd = hwif->INB(hwif->dma_command); + /* stop DMA */ + hwif->OUTB((dma_cmd & ~1), hwif->dma_command); + /* get DMA status */ + dma_stat = hwif->INB(hwif->dma_status); + /* clear the INTR & ERROR bits */ + hwif->OUTB(dma_stat|6, hwif->dma_status); + if (cmd64x_alt_dma_status(dev)) { + u8 dma_intr = 0; + u8 dma_mask = (hwif->channel) ? ARTTIM23_INTR_CH1 : + CFR_INTR_CH0; + u8 dma_reg = (hwif->channel) ? ARTTIM2 : CFR; + (void) pci_read_config_byte(dev, dma_reg, &dma_intr); + /* clear the INTR bit */ + (void) pci_write_config_byte(dev, dma_reg, dma_intr|dma_mask); + } + /* purge DMA mappings */ + ide_destroy_dmatable(drive); + /* verify good DMA status */ + return (dma_stat & 7) != 4; +} + +static int cmd64x_ide_dma_test_irq (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 dma_alt_stat = 0, mask = (hwif->channel) ? MRDMODE_INTR_CH1 : + MRDMODE_INTR_CH0; + u8 dma_stat = hwif->INB(hwif->dma_status); + + (void) pci_read_config_byte(dev, MRDMODE, &dma_alt_stat); +#ifdef DEBUG + printk("%s: dma_stat: 0x%02x dma_alt_stat: " + "0x%02x mask: 0x%02x\n", drive->name, + dma_stat, dma_alt_stat, mask); +#endif + if (!(dma_alt_stat & mask)) + return 0; + + /* return 1 if INTR asserted */ + if ((dma_stat & 4) == 4) + return 1; + + return 0; +} + +/* + * ASUS P55T2P4D with CMD646 chipset revision 0x01 requires the old + * event order for DMA transfers. + */ + +static int cmd646_1_ide_dma_end (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 dma_stat = 0, dma_cmd = 0; + + drive->waiting_for_dma = 0; + /* get DMA status */ + dma_stat = hwif->INB(hwif->dma_status); + /* read DMA command state */ + dma_cmd = hwif->INB(hwif->dma_command); + /* stop DMA */ + hwif->OUTB((dma_cmd & ~1), hwif->dma_command); + /* clear the INTR & ERROR bits */ + hwif->OUTB(dma_stat|6, hwif->dma_status); + /* and free any DMA resources */ + ide_destroy_dmatable(drive); + /* verify good DMA status */ + return (dma_stat & 7) != 4; +} + +static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const char *name) +{ + u32 class_rev = 0; + u8 mrdmode = 0; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + +#ifdef __i386__ + if (dev->resource[PCI_ROM_RESOURCE].start) { + pci_write_config_byte(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); + printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start); + } +#endif + + switch(dev->device) { + case PCI_DEVICE_ID_CMD_643: + break; + case PCI_DEVICE_ID_CMD_646: + printk(KERN_INFO "%s: chipset revision 0x%02X, ", name, class_rev); + switch(class_rev) { + case 0x07: + case 0x05: + printk("UltraDMA Capable"); + break; + case 0x03: + printk("MultiWord DMA Force Limited"); + break; + case 0x01: + default: + printk("MultiWord DMA Limited, IRQ workaround enabled"); + break; + } + printk("\n"); + break; + case PCI_DEVICE_ID_CMD_648: + case PCI_DEVICE_ID_CMD_649: + break; + default: + break; + } + + /* Set a good latency timer and cache line size value. */ + (void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); + /* FIXME: pci_set_master() to ensure a good latency timer value */ + + /* Setup interrupts. */ + (void) pci_read_config_byte(dev, MRDMODE, &mrdmode); + mrdmode &= ~(0x30); + (void) pci_write_config_byte(dev, MRDMODE, mrdmode); + + /* Use MEMORY READ LINE for reads. + * NOTE: Although not mentioned in the PCI0646U specs, + * these bits are write only and won't be read + * back as set or not. The PCI0646U2 specs clarify + * this point. + */ + (void) pci_write_config_byte(dev, MRDMODE, mrdmode | 0x02); + + /* Set reasonable active/recovery/address-setup values. */ + (void) pci_write_config_byte(dev, ARTTIM0, 0x40); + (void) pci_write_config_byte(dev, DRWTIM0, 0x3f); + (void) pci_write_config_byte(dev, ARTTIM1, 0x40); + (void) pci_write_config_byte(dev, DRWTIM1, 0x3f); +#ifdef __i386__ + (void) pci_write_config_byte(dev, ARTTIM23, 0x1c); +#else + (void) pci_write_config_byte(dev, ARTTIM23, 0x5c); +#endif + (void) pci_write_config_byte(dev, DRWTIM23, 0x3f); + (void) pci_write_config_byte(dev, DRWTIM3, 0x3f); +#ifdef CONFIG_PPC + (void) pci_write_config_byte(dev, UDIDETCR0, 0xf0); +#endif /* CONFIG_PPC */ + +#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) + + cmd_devs[n_cmd_devs++] = dev; + + if (!cmd64x_proc) { + cmd64x_proc = 1; + ide_pci_create_host_proc("cmd64x", cmd64x_get_info); + } +#endif /* DISPLAY_CMD64X_TIMINGS && CONFIG_PROC_FS */ + + return 0; +} + +static unsigned int __devinit ata66_cmd64x(ide_hwif_t *hwif) +{ + u8 ata66 = 0, mask = (hwif->channel) ? 0x02 : 0x01; + + switch(hwif->pci_dev->device) { + case PCI_DEVICE_ID_CMD_643: + case PCI_DEVICE_ID_CMD_646: + return ata66; + default: + break; + } + pci_read_config_byte(hwif->pci_dev, BMIDECSR, &ata66); + return (ata66 & mask) ? 1 : 0; +} + +static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + unsigned int class_rev; + + hwif->autodma = 0; + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + + hwif->tuneproc = &cmd64x_tuneproc; + hwif->speedproc = &cmd64x_tune_chipset; + + if (!hwif->dma_base) { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + return; + } + + hwif->atapi_dma = 1; + + hwif->ultra_mask = 0x3f; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + if (dev->device == PCI_DEVICE_ID_CMD_643) + hwif->ultra_mask = 0x80; + if (dev->device == PCI_DEVICE_ID_CMD_646) + hwif->ultra_mask = (class_rev > 0x04) ? 0x07 : 0x80; + if (dev->device == PCI_DEVICE_ID_CMD_648) + hwif->ultra_mask = 0x1f; + + hwif->ide_dma_check = &cmd64x_config_drive_for_dma; + if (!(hwif->udma_four)) + hwif->udma_four = ata66_cmd64x(hwif); + + if (dev->device == PCI_DEVICE_ID_CMD_646) { + hwif->chipset = ide_cmd646; + if (class_rev == 0x01) { + hwif->ide_dma_end = &cmd646_1_ide_dma_end; + } else { + hwif->ide_dma_end = &cmd64x_ide_dma_end; + hwif->ide_dma_test_irq = &cmd64x_ide_dma_test_irq; + } + } else { + hwif->ide_dma_end = &cmd64x_ide_dma_end; + hwif->ide_dma_test_irq = &cmd64x_ide_dma_test_irq; + } + + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { + { /* 0 */ + .name = "CMD643", + .init_chipset = init_chipset_cmd64x, + .init_hwif = init_hwif_cmd64x, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, + },{ /* 1 */ + .name = "CMD646", + .init_chipset = init_chipset_cmd64x, + .init_hwif = init_hwif_cmd64x, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x00,0x00,0x00}, {0x51,0x80,0x80}}, + .bootable = ON_BOARD, + },{ /* 2 */ + .name = "CMD648", + .init_chipset = init_chipset_cmd64x, + .init_hwif = init_hwif_cmd64x, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, + },{ /* 3 */ + .name = "CMD649", + .init_chipset = init_chipset_cmd64x, + .init_hwif = init_hwif_cmd64x, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, + } +}; + +static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &cmd64x_chipsets[id->driver_data]); +} + +static struct pci_device_id cmd64x_pci_tbl[] = { + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_643, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_649, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl); + +static struct pci_driver driver = { + .name = "CMD64x_IDE", + .id_table = cmd64x_pci_tbl, + .probe = cmd64x_init_one, +}; + +static int cmd64x_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(cmd64x_ide_init); + +MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for CMD64x IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c new file mode 100644 index 0000000..7dc2468 --- /dev/null +++ b/drivers/ide/pci/cs5520.c @@ -0,0 +1,274 @@ +/* + * IDE tuning and bus mastering support for the CS5510/CS5520 + * chipsets + * + * The CS5510/CS5520 are slightly unusual devices. Unlike the + * typical IDE controllers they do bus mastering with the drive in + * PIO mode and smarter silicon. + * + * The practical upshot of this is that we must always tune the + * drive for the right PIO mode. We must also ignore all the blacklists + * and the drive bus mastering DMA information. + * + * *** This driver is strictly experimental *** + * + * (c) Copyright Red Hat Inc 2002 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * For the avoidance of doubt the "preferred form" of this code is one which + * is in an open non patent encumbered format. Where cryptographic key signing + * forms part of the process of creating an executable the information + * including keys needed to generate an equivalently functional executable + * are deemed to be part of the source code. + * + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> + +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/ide.h> +#include <linux/dma-mapping.h> + +#include <asm/io.h> +#include <asm/irq.h> + +struct pio_clocks +{ + int address; + int assert; + int recovery; +}; + +static struct pio_clocks cs5520_pio_clocks[]={ + {3, 6, 11}, + {2, 5, 6}, + {1, 4, 3}, + {1, 3, 2}, + {1, 2, 1} +}; + +static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *pdev = hwif->pci_dev; + u8 speed = min((u8)XFER_PIO_4, xferspeed); + int pio = speed; + u8 reg; + int controller = drive->dn > 1 ? 1 : 0; + int error; + + switch(speed) + { + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: + case XFER_PIO_0: + pio -= XFER_PIO_0; + break; + default: + pio = 0; + printk(KERN_ERR "cs55x0: bad ide timing.\n"); + } + + printk("PIO clocking = %d\n", pio); + + /* FIXME: if DMA = 1 do we need to set the DMA bit here ? */ + + /* 8bit CAT/CRT - 8bit command timing for channel */ + pci_write_config_byte(pdev, 0x62 + controller, + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); + + /* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */ + + /* FIXME: should these use address ? */ + /* Data read timing */ + pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1), + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); + /* Write command timing */ + pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1), + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); + + /* Set the DMA enable/disable flag */ + reg = inb(hwif->dma_base + 0x02 + 8*controller); + reg |= 1<<((drive->dn&1)+5); + outb(reg, hwif->dma_base + 0x02 + 8*controller); + + error = ide_config_drive_speed(drive, speed); + /* ATAPI is harder so leave it for now */ + if(!error && drive->media == ide_disk) + error = hwif->ide_dma_on(drive); + + return error; +} + +static void cs5520_tune_drive(ide_drive_t *drive, u8 pio) +{ + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + cs5520_tune_chipset(drive, (XFER_PIO_0 + pio)); +} + +static int cs5520_config_drive_xfer_rate(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + + /* Tune the drive for PIO modes up to PIO 4 */ + cs5520_tune_drive(drive, 4); + /* Then tell the core to use DMA operations */ + return hwif->ide_dma_on(drive); +} + +/* + * We provide a callback for our nonstandard DMA location + */ + +static void __devinit cs5520_init_setup_dma(struct pci_dev *dev, ide_pci_device_t *d, ide_hwif_t *hwif) +{ + unsigned long bmide = pci_resource_start(dev, 2); /* Not the usual 4 */ + if(hwif->mate && hwif->mate->dma_base) /* Second channel at primary + 8 */ + bmide += 8; + ide_setup_dma(hwif, bmide, 8); +} + +/* + * We wrap the DMA activate to set the vdma flag. This is needed + * so that the IDE DMA layer issues PIO not DMA commands over the + * DMA channel + */ + +static int cs5520_dma_on(ide_drive_t *drive) +{ + drive->vdma = 1; + return 0; +} + +static void __devinit init_hwif_cs5520(ide_hwif_t *hwif) +{ + hwif->tuneproc = &cs5520_tune_drive; + hwif->speedproc = &cs5520_tune_chipset; + hwif->ide_dma_check = &cs5520_config_drive_xfer_rate; + hwif->ide_dma_on = &cs5520_dma_on; + + if(!noautodma) + hwif->autodma = 1; + + if(!hwif->dma_base) + { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + return; + } + + hwif->atapi_dma = 0; + hwif->ultra_mask = 0; + hwif->swdma_mask = 0; + hwif->mwdma_mask = 0; + + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +#define DECLARE_CS_DEV(name_str) \ + { \ + .name = name_str, \ + .init_setup_dma = cs5520_init_setup_dma, \ + .init_hwif = init_hwif_cs5520, \ + .channels = 2, \ + .autodma = AUTODMA, \ + .bootable = ON_BOARD, \ + .flags = IDEPCI_FLAG_ISA_PORTS, \ + } + +static ide_pci_device_t cyrix_chipsets[] __devinitdata = { + /* 0 */ DECLARE_CS_DEV("Cyrix 5510"), + /* 1 */ DECLARE_CS_DEV("Cyrix 5520") +}; + +/* + * The 5510/5520 are a bit weird. They don't quite set up the way + * the PCI helper layer expects so we must do much of the set up + * work longhand. + */ + +static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ata_index_t index; + ide_pci_device_t *d = &cyrix_chipsets[id->driver_data]; + + ide_setup_pci_noise(dev, d); + + /* We must not grab the entire device, it has 'ISA' space in its + BARS too and we will freak out other bits of the kernel */ + if(pci_enable_device_bars(dev, 1<<2)) + { + printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name); + return 1; + } + pci_set_master(dev); + if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { + printk(KERN_WARNING "cs5520: No suitable DMA available.\n"); + return -ENODEV; + } + + index.all = 0xf0f0; + + /* + * Now the chipset is configured we can let the core + * do all the device setup for us + */ + + ide_pci_setup_ports(dev, d, 14, &index); + + if((index.b.low & 0xf0) != 0xf0) + probe_hwif_init(&ide_hwifs[index.b.low]); + if((index.b.high & 0xf0) != 0xf0) + probe_hwif_init(&ide_hwifs[index.b.high]); + return 0; +} + +static struct pci_device_id cs5520_pci_tbl[] = { + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl); + +static struct pci_driver driver = { + .name = "Cyrix_IDE", + .id_table = cs5520_pci_tbl, + .probe = cs5520_init_one, +}; + +static int cs5520_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(cs5520_ide_init); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c new file mode 100644 index 0000000..0381961 --- /dev/null +++ b/drivers/ide/pci/cs5530.c @@ -0,0 +1,384 @@ +/* + * linux/drivers/ide/pci/cs5530.c Version 0.7 Sept 10, 2002 + * + * Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org> + * Ditto of GNU General Public License. + * + * Copyright (C) 2000 Mark Lord <mlord@pobox.com> + * May be copied or modified under the terms of the GNU General Public License + * + * Development of this chipset driver was funded + * by the nice folks at National Semiconductor. + * + * Documentation: + * CS5530 documentation available from National Semiconductor. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ide.h> +#include <asm/io.h> +#include <asm/irq.h> + +/** + * cs5530_xfer_set_mode - set a new transfer mode at the drive + * @drive: drive to tune + * @mode: new mode + * + * Logging wrapper to the IDE driver speed configuration. This can + * probably go away now. + */ + +static int cs5530_set_xfer_mode (ide_drive_t *drive, u8 mode) +{ + printk(KERN_DEBUG "%s: cs5530_set_xfer_mode(%s)\n", + drive->name, ide_xfer_verbose(mode)); + return (ide_config_drive_speed(drive, mode)); +} + +/* + * Here are the standard PIO mode 0-4 timings for each "format". + * Format-0 uses fast data reg timings, with slower command reg timings. + * Format-1 uses fast timings for all registers, but won't work with all drives. + */ +static unsigned int cs5530_pio_timings[2][5] = { + {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, + {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010} +}; + +/* + * After chip reset, the PIO timings are set to 0x0000e132, which is not valid. + */ +#define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132) +#define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20)) + +/** + * cs5530_tuneproc - select/set PIO modes + * + * cs5530_tuneproc() handles selection/setting of PIO modes + * for both the chipset and drive. + * + * The ide_init_cs5530() routine guarantees that all drives + * will have valid default PIO timings set up before we get here. + */ + +static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */ +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned int format; + unsigned long basereg = CS5530_BASEREG(hwif); + static u8 modes[5] = { XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4}; + + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + if (!cs5530_set_xfer_mode(drive, modes[pio])) { + format = (hwif->INL(basereg+4) >> 31) & 1; + hwif->OUTL(cs5530_pio_timings[format][pio], + basereg+(drive->select.b.unit<<3)); + } +} + +/** + * cs5530_config_dma - select/set DMA and UDMA modes + * @drive: drive to tune + * + * cs5530_config_dma() handles selection/setting of DMA/UDMA modes + * for both the chipset and drive. The CS5530 has limitations about + * mixing DMA/UDMA on the same cable. + */ + +static int cs5530_config_dma (ide_drive_t *drive) +{ + int udma_ok = 1, mode = 0; + ide_hwif_t *hwif = HWIF(drive); + int unit = drive->select.b.unit; + ide_drive_t *mate = &hwif->drives[unit^1]; + struct hd_driveid *id = drive->id; + unsigned int reg, timings; + unsigned long basereg; + + /* + * Default to DMA-off in case we run into trouble here. + */ + hwif->ide_dma_off_quietly(drive); + /* turn off DMA while we fiddle */ + hwif->ide_dma_host_off(drive); + /* clear DMA_capable bit */ + + /* + * The CS5530 specifies that two drives sharing a cable cannot + * mix UDMA/MDMA. It has to be one or the other, for the pair, + * though different timings can still be chosen for each drive. + * We could set the appropriate timing bits on the fly, + * but that might be a bit confusing. So, for now we statically + * handle this requirement by looking at our mate drive to see + * what it is capable of, before choosing a mode for our own drive. + * + * Note: This relies on the fact we never fail from UDMA to MWDMA_2 + * but instead drop to PIO + */ + if (mate->present) { + struct hd_driveid *mateid = mate->id; + if (mateid && (mateid->capability & 1) && + !__ide_dma_bad_drive(mate)) { + if ((mateid->field_valid & 4) && + (mateid->dma_ultra & 7)) + udma_ok = 1; + else if ((mateid->field_valid & 2) && + (mateid->dma_mword & 7)) + udma_ok = 0; + else + udma_ok = 1; + } + } + + /* + * Now see what the current drive is capable of, + * selecting UDMA only if the mate said it was ok. + */ + if (id && (id->capability & 1) && drive->autodma && + !__ide_dma_bad_drive(drive)) { + if (udma_ok && (id->field_valid & 4) && (id->dma_ultra & 7)) { + if (id->dma_ultra & 4) + mode = XFER_UDMA_2; + else if (id->dma_ultra & 2) + mode = XFER_UDMA_1; + else if (id->dma_ultra & 1) + mode = XFER_UDMA_0; + } + if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) { + if (id->dma_mword & 4) + mode = XFER_MW_DMA_2; + else if (id->dma_mword & 2) + mode = XFER_MW_DMA_1; + else if (id->dma_mword & 1) + mode = XFER_MW_DMA_0; + } + } + + /* + * Tell the drive to switch to the new mode; abort on failure. + */ + if (!mode || cs5530_set_xfer_mode(drive, mode)) + return 1; /* failure */ + + /* + * Now tune the chipset to match the drive: + */ + switch (mode) { + case XFER_UDMA_0: timings = 0x00921250; break; + case XFER_UDMA_1: timings = 0x00911140; break; + case XFER_UDMA_2: timings = 0x00911030; break; + case XFER_MW_DMA_0: timings = 0x00077771; break; + case XFER_MW_DMA_1: timings = 0x00012121; break; + case XFER_MW_DMA_2: timings = 0x00002020; break; + default: + printk(KERN_ERR "%s: cs5530_config_dma: huh? mode=%02x\n", + drive->name, mode); + return 1; /* failure */ + } + basereg = CS5530_BASEREG(hwif); + reg = hwif->INL(basereg+4); /* get drive0 config register */ + timings |= reg & 0x80000000; /* preserve PIO format bit */ + if (unit == 0) { /* are we configuring drive0? */ + hwif->OUTL(timings, basereg+4); /* write drive0 config register */ + } else { + if (timings & 0x00100000) + reg |= 0x00100000; /* enable UDMA timings for both drives */ + else + reg &= ~0x00100000; /* disable UDMA timings for both drives */ + hwif->OUTL(reg, basereg+4); /* write drive0 config register */ + hwif->OUTL(timings, basereg+12); /* write drive1 config register */ + } + (void) hwif->ide_dma_host_on(drive); + /* set DMA_capable bit */ + + /* + * Finally, turn DMA on in software, and exit. + */ + return hwif->ide_dma_on(drive); /* success */ +} + +/** + * init_chipset_5530 - set up 5530 bridge + * @dev: PCI device + * @name: device name + * + * Initialize the cs5530 bridge for reliable IDE DMA operation. + */ + +static unsigned int __init init_chipset_cs5530 (struct pci_dev *dev, const char *name) +{ + struct pci_dev *master_0 = NULL, *cs5530_0 = NULL; + unsigned long flags; + + dev = NULL; + while ((dev = pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) { + switch (dev->device) { + case PCI_DEVICE_ID_CYRIX_PCI_MASTER: + master_0 = dev; + break; + case PCI_DEVICE_ID_CYRIX_5530_LEGACY: + cs5530_0 = dev; + break; + } + } + if (!master_0) { + printk(KERN_ERR "%s: unable to locate PCI MASTER function\n", name); + return 0; + } + if (!cs5530_0) { + printk(KERN_ERR "%s: unable to locate CS5530 LEGACY function\n", name); + return 0; + } + + spin_lock_irqsave(&ide_lock, flags); + /* all CPUs (there should only be one CPU with this chipset) */ + + /* + * Enable BusMaster and MemoryWriteAndInvalidate for the cs5530: + * --> OR 0x14 into 16-bit PCI COMMAND reg of function 0 of the cs5530 + */ + + pci_set_master(cs5530_0); + pci_set_mwi(cs5530_0); + + /* + * Set PCI CacheLineSize to 16-bytes: + * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530 + */ + + pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04); + + /* + * Disable trapping of UDMA register accesses (Win98 hack): + * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530 + */ + + pci_write_config_word(cs5530_0, 0xd0, 0x5006); + + /* + * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus: + * The other settings are what is necessary to get the register + * into a sane state for IDE DMA operation. + */ + + pci_write_config_byte(master_0, 0x40, 0x1e); + + /* + * Set max PCI burst size (16-bytes seems to work best): + * 16bytes: set bit-1 at 0x41 (reg value of 0x16) + * all others: clear bit-1 at 0x41, and do: + * 128bytes: OR 0x00 at 0x41 + * 256bytes: OR 0x04 at 0x41 + * 512bytes: OR 0x08 at 0x41 + * 1024bytes: OR 0x0c at 0x41 + */ + + pci_write_config_byte(master_0, 0x41, 0x14); + + /* + * These settings are necessary to get the chip + * into a sane state for IDE DMA operation. + */ + + pci_write_config_byte(master_0, 0x42, 0x00); + pci_write_config_byte(master_0, 0x43, 0xc1); + + spin_unlock_irqrestore(&ide_lock, flags); + + return 0; +} + +/** + * init_hwif_cs5530 - initialise an IDE channel + * @hwif: IDE to initialize + * + * This gets invoked by the IDE driver once for each channel. It + * performs channel-specific pre-initialization before drive probing. + */ + +static void __init init_hwif_cs5530 (ide_hwif_t *hwif) +{ + unsigned long basereg; + u32 d0_timings; + hwif->autodma = 0; + + if (hwif->mate) + hwif->serialized = hwif->mate->serialized = 1; + + hwif->tuneproc = &cs5530_tuneproc; + basereg = CS5530_BASEREG(hwif); + d0_timings = hwif->INL(basereg+0); + if (CS5530_BAD_PIO(d0_timings)) { + /* PIO timings not initialized? */ + hwif->OUTL(cs5530_pio_timings[(d0_timings>>31)&1][0], basereg+0); + if (!hwif->drives[0].autotune) + hwif->drives[0].autotune = 1; + /* needs autotuning later */ + } + if (CS5530_BAD_PIO(hwif->INL(basereg+8))) { + /* PIO timings not initialized? */ + hwif->OUTL(cs5530_pio_timings[(d0_timings>>31)&1][0], basereg+8); + if (!hwif->drives[1].autotune) + hwif->drives[1].autotune = 1; + /* needs autotuning later */ + } + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x07; + hwif->mwdma_mask = 0x07; + + hwif->ide_dma_check = &cs5530_config_dma; + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +static ide_pci_device_t cs5530_chipset __devinitdata = { + .name = "CS5530", + .init_chipset = init_chipset_cs5530, + .init_hwif = init_hwif_cs5530, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, +}; + +static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &cs5530_chipset); +} + +static struct pci_device_id cs5530_pci_tbl[] = { + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl); + +static struct pci_driver driver = { + .name = "CS5530 IDE", + .id_table = cs5530_pci_tbl, + .probe = cs5530_init_one, +}; + +static int cs5530_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(cs5530_ide_init); + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("PCI driver module for Cyrix/NS 5530 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c new file mode 100644 index 0000000..80d67e9 --- /dev/null +++ b/drivers/ide/pci/cy82c693.c @@ -0,0 +1,531 @@ +/* + * linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002 + * + * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer + * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator + * + * CYPRESS CY82C693 chipset IDE controller + * + * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards. + * Writing the driver was quite simple, since most of the job is + * done by the generic pci-ide support. + * The hard part was finding the CY82C693's datasheet on Cypress's + * web page :-(. But Altavista solved this problem :-). + * + * + * Notes: + * - I recently got a 16.8G IBM DTTA, so I was able to test it with + * a large and fast disk - the results look great, so I'd say the + * driver is working fine :-) + * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA + * - this is my first linux driver, so there's probably a lot of room + * for optimizations and bug fixing, so feel free to do it. + * - use idebus=xx parameter to set PCI bus speed - needed to calc + * timings for PIO modes (default will be 40) + * - if using PIO mode it's a good idea to set the PIO mode and + * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda + * - I had some problems with my IBM DHEA with PIO modes < 2 + * (lost interrupts) ????? + * - first tests with DMA look okay, they seem to work, but there is a + * problem with sound - the BusMaster IDE TimeOut should fixed this + * + * Ancient History: + * AMH@1999-08-24: v0.34 init_cy82c693_chip moved to pci_init_cy82c693 + * ASK@1999-01-23: v0.33 made a few minor code clean ups + * removed DMA clock speed setting by default + * added boot message + * ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut + * added support to set DMA Controller Clock Speed + * ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes + * on some drives. + * ASK@1998-10-29: v0.3 added support to set DMA modes + * ASK@1998-10-28: v0.2 added support to set PIO modes + * ASK@1998-10-27: v0.1 first version - chipset detection + * + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/ide.h> +#include <linux/init.h> + +#include <asm/io.h> + +/* the current version */ +#define CY82_VERSION "CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)" + +/* + * The following are used to debug the driver. + */ +#define CY82C693_DEBUG_LOGS 0 +#define CY82C693_DEBUG_INFO 0 + +/* define CY82C693_SETDMA_CLOCK to set DMA Controller Clock Speed to ATCLK */ +#undef CY82C693_SETDMA_CLOCK + +/* + * NOTE: the value for busmaster timeout is tricky and I got it by + * trial and error! By using a to low value will cause DMA timeouts + * and drop IDE performance, and by using a to high value will cause + * audio playback to scatter. + * If you know a better value or how to calc it, please let me know. + */ + +/* twice the value written in cy82c693ub datasheet */ +#define BUSMASTER_TIMEOUT 0x50 +/* + * the value above was tested on my machine and it seems to work okay + */ + +/* here are the offset definitions for the registers */ +#define CY82_IDE_CMDREG 0x04 +#define CY82_IDE_ADDRSETUP 0x48 +#define CY82_IDE_MASTER_IOR 0x4C +#define CY82_IDE_MASTER_IOW 0x4D +#define CY82_IDE_SLAVE_IOR 0x4E +#define CY82_IDE_SLAVE_IOW 0x4F +#define CY82_IDE_MASTER_8BIT 0x50 +#define CY82_IDE_SLAVE_8BIT 0x51 + +#define CY82_INDEX_PORT 0x22 +#define CY82_DATA_PORT 0x23 + +#define CY82_INDEX_CTRLREG1 0x01 +#define CY82_INDEX_CHANNEL0 0x30 +#define CY82_INDEX_CHANNEL1 0x31 +#define CY82_INDEX_TIMEOUT 0x32 + +/* the max PIO mode - from datasheet */ +#define CY82C693_MAX_PIO 4 + +/* the min and max PCI bus speed in MHz - from datasheet */ +#define CY82C963_MIN_BUS_SPEED 25 +#define CY82C963_MAX_BUS_SPEED 33 + +/* the struct for the PIO mode timings */ +typedef struct pio_clocks_s { + u8 address_time; /* Address setup (clocks) */ + u8 time_16r; /* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */ + u8 time_16w; /* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */ + u8 time_8; /* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */ +} pio_clocks_t; + +/* + * calc clocks using bus_speed + * returns (rounded up) time in bus clocks for time in ns + */ +static int calc_clk (int time, int bus_speed) +{ + int clocks; + + clocks = (time*bus_speed+999)/1000 -1; + + if (clocks < 0) + clocks = 0; + + if (clocks > 0x0F) + clocks = 0x0F; + + return clocks; +} + +/* + * compute the values for the clock registers for PIO + * mode and pci_clk [MHz] speed + * + * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used + * for mode 3 and 4 drives 8 and 16-bit timings are the same + * + */ +static void compute_clocks (u8 pio, pio_clocks_t *p_pclk) +{ + int clk1, clk2; + int bus_speed = system_bus_clock(); /* get speed of PCI bus */ + + /* we don't check against CY82C693's min and max speed, + * so you can play with the idebus=xx parameter + */ + + if (pio > CY82C693_MAX_PIO) + pio = CY82C693_MAX_PIO; + + /* let's calc the address setup time clocks */ + p_pclk->address_time = (u8)calc_clk(ide_pio_timings[pio].setup_time, bus_speed); + + /* let's calc the active and recovery time clocks */ + clk1 = calc_clk(ide_pio_timings[pio].active_time, bus_speed); + + /* calc recovery timing */ + clk2 = ide_pio_timings[pio].cycle_time - + ide_pio_timings[pio].active_time - + ide_pio_timings[pio].setup_time; + + clk2 = calc_clk(clk2, bus_speed); + + clk1 = (clk1<<4)|clk2; /* combine active and recovery clocks */ + + /* note: we use the same values for 16bit IOR and IOW + * those are all the same, since I don't have other + * timings than those from ide-lib.c + */ + + p_pclk->time_16r = (u8)clk1; + p_pclk->time_16w = (u8)clk1; + + /* what are good values for 8bit ?? */ + p_pclk->time_8 = (u8)clk1; +} + +/* + * set DMA mode a specific channel for CY82C693 + */ + +static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single) +{ + u8 index = 0, data = 0; + + if (mode>2) /* make sure we set a valid mode */ + mode = 2; + + if (mode > drive->id->tDMA) /* to be absolutly sure we have a valid mode */ + mode = drive->id->tDMA; + + index = (HWIF(drive)->channel==0) ? CY82_INDEX_CHANNEL0 : CY82_INDEX_CHANNEL1; + +#if CY82C693_DEBUG_LOGS + /* for debug let's show the previous values */ + + HWIF(drive)->OUTB(index, CY82_INDEX_PORT); + data = HWIF(drive)->INB(CY82_DATA_PORT); + + printk (KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n", + drive->name, HWIF(drive)->channel, drive->select.b.unit, + (data&0x3), ((data>>2)&1)); +#endif /* CY82C693_DEBUG_LOGS */ + + data = (u8)mode|(u8)(single<<2); + + HWIF(drive)->OUTB(index, CY82_INDEX_PORT); + HWIF(drive)->OUTB(data, CY82_DATA_PORT); + +#if CY82C693_DEBUG_INFO + printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n", + drive->name, HWIF(drive)->channel, drive->select.b.unit, + mode, single); +#endif /* CY82C693_DEBUG_INFO */ + + /* + * note: below we set the value for Bus Master IDE TimeOut Register + * I'm not absolutly sure what this does, but it solved my problem + * with IDE DMA and sound, so I now can play sound and work with + * my IDE driver at the same time :-) + * + * If you know the correct (best) value for this register please + * let me know - ASK + */ + + data = BUSMASTER_TIMEOUT; + HWIF(drive)->OUTB(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT); + HWIF(drive)->OUTB(data, CY82_DATA_PORT); + +#if CY82C693_DEBUG_INFO + printk (KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n", + drive->name, data); +#endif /* CY82C693_DEBUG_INFO */ +} + +/* + * used to set DMA mode for CY82C693 (single and multi modes) + */ +static int cy82c693_ide_dma_on (ide_drive_t *drive) +{ + struct hd_driveid *id = drive->id; + +#if CY82C693_DEBUG_INFO + printk (KERN_INFO "dma_on: %s\n", drive->name); +#endif /* CY82C693_DEBUG_INFO */ + + if (id != NULL) { + /* Enable DMA on any drive that has DMA + * (multi or single) enabled + */ + if (id->field_valid & 2) { /* regular DMA */ + int mmode, smode; + + mmode = id->dma_mword & (id->dma_mword >> 8); + smode = id->dma_1word & (id->dma_1word >> 8); + + if (mmode != 0) { + /* enable multi */ + cy82c693_dma_enable(drive, (mmode >> 1), 0); + } else if (smode != 0) { + /* enable single */ + cy82c693_dma_enable(drive, (smode >> 1), 1); + } + } + } + return __ide_dma_on(drive); +} + +/* + * tune ide drive - set PIO mode + */ +static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + pio_clocks_t pclk; + unsigned int addrCtrl; + + /* select primary or secondary channel */ + if (hwif->index > 0) { /* drive is on the secondary channel */ + dev = pci_find_slot(dev->bus->number, dev->devfn+1); + if (!dev) { + printk(KERN_ERR "%s: tune_drive: " + "Cannot find secondary interface!\n", + drive->name); + return; + } + } + +#if CY82C693_DEBUG_LOGS + /* for debug let's show the register values */ + + if (drive->select.b.unit == 0) { + /* + * get master drive registers + * address setup control register + * is 32 bit !!! + */ + pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); + addrCtrl &= 0x0F; + + /* now let's get the remaining registers */ + pci_read_config_byte(dev, CY82_IDE_MASTER_IOR, &pclk.time_16r); + pci_read_config_byte(dev, CY82_IDE_MASTER_IOW, &pclk.time_16w); + pci_read_config_byte(dev, CY82_IDE_MASTER_8BIT, &pclk.time_8); + } else { + /* + * set slave drive registers + * address setup control register + * is 32 bit !!! + */ + pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); + + addrCtrl &= 0xF0; + addrCtrl >>= 4; + + /* now let's get the remaining registers */ + pci_read_config_byte(dev, CY82_IDE_SLAVE_IOR, &pclk.time_16r); + pci_read_config_byte(dev, CY82_IDE_SLAVE_IOW, &pclk.time_16w); + pci_read_config_byte(dev, CY82_IDE_SLAVE_8BIT, &pclk.time_8); + } + + printk(KERN_INFO "%s (ch=%d, dev=%d): PIO timing is " + "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n", + drive->name, hwif->channel, drive->select.b.unit, + addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8); +#endif /* CY82C693_DEBUG_LOGS */ + + /* first let's calc the pio modes */ + pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO, NULL); + +#if CY82C693_DEBUG_INFO + printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio); +#endif /* CY82C693_DEBUG_INFO */ + + /* let's calc the values for this PIO mode */ + compute_clocks(pio, &pclk); + + /* now let's write the clocks registers */ + if (drive->select.b.unit == 0) { + /* + * set master drive + * address setup control register + * is 32 bit !!! + */ + pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); + + addrCtrl &= (~0xF); + addrCtrl |= (unsigned int)pclk.address_time; + pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); + + /* now let's set the remaining registers */ + pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r); + pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w); + pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8); + + addrCtrl &= 0xF; + } else { + /* + * set slave drive + * address setup control register + * is 32 bit !!! + */ + pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); + + addrCtrl &= (~0xF0); + addrCtrl |= ((unsigned int)pclk.address_time<<4); + pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); + + /* now let's set the remaining registers */ + pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r); + pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w); + pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8); + + addrCtrl >>= 4; + addrCtrl &= 0xF; + } + +#if CY82C693_DEBUG_INFO + printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to " + "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n", + drive->name, hwif->channel, drive->select.b.unit, + addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8); +#endif /* CY82C693_DEBUG_INFO */ +} + +/* + * this function is called during init and is used to setup the cy82c693 chip + */ +static unsigned int __init init_chipset_cy82c693(struct pci_dev *dev, const char *name) +{ + if (PCI_FUNC(dev->devfn) != 1) + return 0; + +#ifdef CY82C693_SETDMA_CLOCK + u8 data = 0; +#endif /* CY82C693_SETDMA_CLOCK */ + + /* write info about this verion of the driver */ + printk(KERN_INFO CY82_VERSION "\n"); + +#ifdef CY82C693_SETDMA_CLOCK + /* okay let's set the DMA clock speed */ + + outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); + data = inb(CY82_DATA_PORT); + +#if CY82C693_DEBUG_INFO + printk(KERN_INFO "%s: Peripheral Configuration Register: 0x%X\n", + name, data); +#endif /* CY82C693_DEBUG_INFO */ + + /* + * for some reason sometimes the DMA controller + * speed is set to ATCLK/2 ???? - we fix this here + * + * note: i don't know what causes this strange behaviour, + * but even changing the dma speed doesn't solve it :-( + * the ide performance is still only half the normal speed + * + * if anybody knows what goes wrong with my machine, please + * let me know - ASK + */ + + data |= 0x03; + + outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); + outb(data, CY82_DATA_PORT); + +#if CY82C693_DEBUG_INFO + printk (KERN_INFO "%s: New Peripheral Configuration Register: 0x%X\n", + name, data); +#endif /* CY82C693_DEBUG_INFO */ + +#endif /* CY82C693_SETDMA_CLOCK */ + return 0; +} + +/* + * the init function - called for each ide channel once + */ +static void __init init_hwif_cy82c693(ide_hwif_t *hwif) +{ + hwif->autodma = 0; + + hwif->chipset = ide_cy82c693; + hwif->tuneproc = &cy82c693_tune_drive; + + if (!hwif->dma_base) { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + return; + } + + hwif->atapi_dma = 1; + hwif->mwdma_mask = 0x04; + hwif->swdma_mask = 0x04; + + hwif->ide_dma_on = &cy82c693_ide_dma_on; + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +static __initdata ide_hwif_t *primary; + +void __init init_iops_cy82c693(ide_hwif_t *hwif) +{ + if (PCI_FUNC(hwif->pci_dev->devfn) == 1) + primary = hwif; + else { + hwif->mate = primary; + hwif->channel = 1; + } +} + +static ide_pci_device_t cy82c693_chipsets[] __devinitdata = { + { /* 0 */ + .name = "CY82C693", + .init_chipset = init_chipset_cy82c693, + .init_iops = init_iops_cy82c693, + .init_hwif = init_hwif_cy82c693, + .channels = 1, + .autodma = AUTODMA, + .bootable = ON_BOARD, + } +}; + +static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ide_pci_device_t *d = &cy82c693_chipsets[id->driver_data]; + struct pci_dev *dev2; + int ret = -ENODEV; + + /* CY82C693 is more than only a IDE controller. + Function 1 is primary IDE channel, function 2 - secondary. */ + if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && + PCI_FUNC(dev->devfn) == 1) { + dev2 = pci_find_slot(dev->bus->number, dev->devfn + 1); + ret = ide_setup_pci_devices(dev, dev2, d); + } + return ret; +} + +static struct pci_device_id cy82c693_pci_tbl[] = { + { PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl); + +static struct pci_driver driver = { + .name = "Cypress_IDE", + .id_table = cy82c693_pci_tbl, + .probe = cy82c693_init_one, +}; + +static int cy82c693_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(cy82c693_ide_init); + +MODULE_AUTHOR("Andreas Krebs, Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c new file mode 100644 index 0000000..4565cc3 --- /dev/null +++ b/drivers/ide/pci/generic.c @@ -0,0 +1,232 @@ +/* + * linux/drivers/ide/pci/generic.c Version 0.11 December 30, 2002 + * + * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> + * Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * For the avoidance of doubt the "preferred form" of this code is one which + * is in an open non patent encumbered format. Where cryptographic key signing + * forms part of the process of creating an executable the information + * including keys needed to generate an equivalently functional executable + * are deemed to be part of the source code. + */ + +#undef REALLY_SLOW_IO /* most systems can safely undef this */ + +#include <linux/config.h> /* for CONFIG_BLK_DEV_IDEPCI */ +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/pci.h> +#include <linux/ide.h> +#include <linux/init.h> + +#include <asm/io.h> + +static void __devinit init_hwif_generic (ide_hwif_t *hwif) +{ + switch(hwif->pci_dev->device) { + case PCI_DEVICE_ID_UMC_UM8673F: + case PCI_DEVICE_ID_UMC_UM8886A: + case PCI_DEVICE_ID_UMC_UM8886BF: + hwif->irq = hwif->channel ? 15 : 14; + break; + default: + break; + } + + if (!(hwif->dma_base)) + return; + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x7f; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +#if 0 + /* Logic to add back later on */ + + if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) { + ide_pci_device_t *unknown = unknown_chipset; + init_setup_unknown(dev, unknown); + return 1; + } + return 0; +#endif + +static ide_pci_device_t generic_chipsets[] __devinitdata = { + { /* 0 */ + .name = "NS87410", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x43,0x08,0x08}, {0x47,0x08,0x08}}, + .bootable = ON_BOARD, + },{ /* 1 */ + .name = "SAMURAI", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, + },{ /* 2 */ + .name = "HT6565", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, + },{ /* 3 */ + .name = "UM8673F", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = NODMA, + .bootable = ON_BOARD, + },{ /* 4 */ + .name = "UM8886A", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = NODMA, + .bootable = ON_BOARD, + },{ /* 5 */ + .name = "UM8886BF", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = NODMA, + .bootable = ON_BOARD, + },{ /* 6 */ + .name = "HINT_IDE", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, + },{ /* 7 */ + .name = "VIA_IDE", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = NOAUTODMA, + .bootable = ON_BOARD, + },{ /* 8 */ + .name = "OPTI621V", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = NOAUTODMA, + .bootable = ON_BOARD, + },{ /* 9 */ + .name = "VIA8237SATA", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 10 */ + .name = "Piccolo0102", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = NOAUTODMA, + .bootable = ON_BOARD, + },{ /* 11 */ + .name = "Piccolo0103", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = NOAUTODMA, + .bootable = ON_BOARD, + },{ /* 12 */ + .name = "Piccolo0105", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = NOAUTODMA, + .bootable = ON_BOARD, + } +}; + +/** + * generic_init_one - called when a PIIX is found + * @dev: the generic device + * @id: the matching pci id + * + * Called when the PCI registration layer (or the IDE initialization) + * finds a device matching our IDE device tables. + */ + +static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ide_pci_device_t *d = &generic_chipsets[id->driver_data]; + u16 command; + int ret = -ENODEV; + + if (dev->vendor == PCI_VENDOR_ID_UMC && + dev->device == PCI_DEVICE_ID_UMC_UM8886A && + (!(PCI_FUNC(dev->devfn) & 1))) + goto out; /* UM8886A/BF pair */ + + if (dev->vendor == PCI_VENDOR_ID_OPTI && + dev->device == PCI_DEVICE_ID_OPTI_82C558 && + (!(PCI_FUNC(dev->devfn) & 1))) + goto out; + + pci_read_config_word(dev, PCI_COMMAND, &command); + if (!(command & PCI_COMMAND_IO)) { + printk(KERN_INFO "Skipping disabled %s IDE controller.\n", d->name); + goto out; + } + ret = ide_setup_pci_device(dev, d); +out: + return ret; +} + +static struct pci_device_id generic_pci_tbl[] = { + { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, + { PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5}, + { PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6}, + { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7}, + { PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8}, +#ifdef CONFIG_BLK_DEV_IDE_SATA + { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237_SATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9}, +#endif + { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10}, + { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11}, + { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, generic_pci_tbl); + +static struct pci_driver driver = { + .name = "PCI_IDE", + .id_table = generic_pci_tbl, + .probe = generic_init_one, +}; + +static int generic_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(generic_ide_init); + +MODULE_AUTHOR("Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for generic PCI IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c new file mode 100644 index 0000000..bbde462 --- /dev/null +++ b/drivers/ide/pci/hpt34x.c @@ -0,0 +1,278 @@ +/* + * linux/drivers/ide/pci/hpt34x.c Version 0.40 Sept 10, 2002 + * + * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> + * May be copied or modified under the terms of the GNU General Public License + * + * + * 00:12.0 Unknown mass storage controller: + * Triones Technologies, Inc. + * Unknown device 0003 (rev 01) + * + * hde: UDMA 2 (0x0000 0x0002) (0x0000 0x0010) + * hdf: UDMA 2 (0x0002 0x0012) (0x0010 0x0030) + * hde: DMA 2 (0x0000 0x0002) (0x0000 0x0010) + * hdf: DMA 2 (0x0002 0x0012) (0x0010 0x0030) + * hdg: DMA 1 (0x0012 0x0052) (0x0030 0x0070) + * hdh: DMA 1 (0x0052 0x0252) (0x0070 0x00f0) + * + * ide-pci.c reference + * + * Since there are two cards that report almost identically, + * the only discernable difference is the values reported in pcicmd. + * Booting-BIOS card or HPT363 :: pcicmd == 0x07 + * Non-bootable card or HPT343 :: pcicmd == 0x05 + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ide.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#define HPT343_DEBUG_DRIVE_INFO 0 + +static u8 hpt34x_ratemask (ide_drive_t *drive) +{ + return 1; +} + +static void hpt34x_clear_chipset (ide_drive_t *drive) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + u32 reg1 = 0, tmp1 = 0, reg2 = 0, tmp2 = 0; + + pci_read_config_dword(dev, 0x44, ®1); + pci_read_config_dword(dev, 0x48, ®2); + tmp1 = ((0x00 << (3*drive->dn)) | (reg1 & ~(7 << (3*drive->dn)))); + tmp2 = (reg2 & ~(0x11 << drive->dn)); + pci_write_config_dword(dev, 0x44, tmp1); + pci_write_config_dword(dev, 0x48, tmp2); +} + +static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + u8 speed = ide_rate_filter(hpt34x_ratemask(drive), xferspeed); + u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0; + u8 hi_speed, lo_speed; + + hi_speed = speed >> 4; + lo_speed = speed & 0x0f; + + if (hi_speed & 7) { + hi_speed = (hi_speed & 4) ? 0x01 : 0x10; + } else { + lo_speed <<= 5; + lo_speed >>= 5; + } + + pci_read_config_dword(dev, 0x44, ®1); + pci_read_config_dword(dev, 0x48, ®2); + tmp1 = ((lo_speed << (3*drive->dn)) | (reg1 & ~(7 << (3*drive->dn)))); + tmp2 = ((hi_speed << drive->dn) | reg2); + pci_write_config_dword(dev, 0x44, tmp1); + pci_write_config_dword(dev, 0x48, tmp2); + +#if HPT343_DEBUG_DRIVE_INFO + printk("%s: %s drive%d (0x%04x 0x%04x) (0x%04x 0x%04x)" \ + " (0x%02x 0x%02x)\n", + drive->name, ide_xfer_verbose(speed), + drive->dn, reg1, tmp1, reg2, tmp2, + hi_speed, lo_speed); +#endif /* HPT343_DEBUG_DRIVE_INFO */ + + return(ide_config_drive_speed(drive, speed)); +} + +static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio) +{ + pio = ide_get_best_pio_mode(drive, pio, 5, NULL); + hpt34x_clear_chipset(drive); + (void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio)); +} + +/* + * This allows the configuration of ide_pci chipset registers + * for cards that learn about the drive's UDMA, DMA, PIO capabilities + * after the drive is reported by the OS. Initially for designed for + * HPT343 UDMA chipset by HighPoint|Triones Technologies, Inc. + */ + +static int config_chipset_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, hpt34x_ratemask(drive)); + + if (!(speed)) + return 0; + + hpt34x_clear_chipset(drive); + (void) hpt34x_tune_chipset(drive, speed); + return ide_dma_enable(drive); +} + +static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + drive->init_speed = 0; + + if (id && (id->capability & 1) && drive->autodma) { + + if (ide_use_dma(drive)) { + if (config_chipset_for_dma(drive)) +#ifndef CONFIG_HPT34X_AUTODMA + return hwif->ide_dma_off_quietly(drive); +#else + return hwif->ide_dma_on(drive); +#endif + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + hpt34x_tune_drive(drive, 255); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +/* + * If the BIOS does not set the IO base addaress to XX00, 343 will fail. + */ +#define HPT34X_PCI_INIT_REG 0x80 + +static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev, const char *name) +{ + int i = 0; + unsigned long hpt34xIoBase = pci_resource_start(dev, 4); + unsigned long hpt_addr[4] = { 0x20, 0x34, 0x28, 0x3c }; + unsigned long hpt_addr_len[4] = { 7, 3, 7, 3 }; + u16 cmd; + unsigned long flags; + + local_irq_save(flags); + + pci_write_config_byte(dev, HPT34X_PCI_INIT_REG, 0x00); + pci_read_config_word(dev, PCI_COMMAND, &cmd); + + if (cmd & PCI_COMMAND_MEMORY) { + if (pci_resource_start(dev, PCI_ROM_RESOURCE)) { + pci_write_config_byte(dev, PCI_ROM_ADDRESS, + dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); + printk(KERN_INFO "HPT345: ROM enabled at 0x%08lx\n", + dev->resource[PCI_ROM_RESOURCE].start); + } + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0); + } else { + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); + } + + /* + * Since 20-23 can be assigned and are R/W, we correct them. + */ + pci_write_config_word(dev, PCI_COMMAND, cmd & ~PCI_COMMAND_IO); + for(i=0; i<4; i++) { + dev->resource[i].start = (hpt34xIoBase + hpt_addr[i]); + dev->resource[i].end = dev->resource[i].start + hpt_addr_len[i]; + dev->resource[i].flags = IORESOURCE_IO; + pci_write_config_dword(dev, + (PCI_BASE_ADDRESS_0 + (i * 4)), + dev->resource[i].start); + } + pci_write_config_word(dev, PCI_COMMAND, cmd); + + local_irq_restore(flags); + + return dev->irq; +} + +static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif) +{ + u16 pcicmd = 0; + + hwif->autodma = 0; + + hwif->tuneproc = &hpt34x_tune_drive; + hwif->speedproc = &hpt34x_tune_chipset; + hwif->no_dsc = 1; + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + + pci_read_config_word(hwif->pci_dev, PCI_COMMAND, &pcicmd); + + if (!hwif->dma_base) + return; + + hwif->ultra_mask = 0x07; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + hwif->ide_dma_check = &hpt34x_config_drive_xfer_rate; + if (!noautodma) + hwif->autodma = (pcicmd & PCI_COMMAND_MEMORY) ? 1 : 0; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +static ide_pci_device_t hpt34x_chipset __devinitdata = { + .name = "HPT34X", + .init_chipset = init_chipset_hpt34x, + .init_hwif = init_hwif_hpt34x, + .channels = 2, + .autodma = NOAUTODMA, + .bootable = NEVER_BOARD, + .extra = 16 +}; + +static int __devinit hpt34x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ide_pci_device_t *d = &hpt34x_chipset; + static char *chipset_names[] = {"HPT343", "HPT345"}; + u16 pcicmd = 0; + + pci_read_config_word(dev, PCI_COMMAND, &pcicmd); + + d->name = chipset_names[(pcicmd & PCI_COMMAND_MEMORY) ? 1 : 0]; + d->bootable = (pcicmd & PCI_COMMAND_MEMORY) ? OFF_BOARD : NEVER_BOARD; + + return ide_setup_pci_device(dev, d); +} + +static struct pci_device_id hpt34x_pci_tbl[] = { + { PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT343, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, hpt34x_pci_tbl); + +static struct pci_driver driver = { + .name = "HPT34x_IDE", + .id_table = hpt34x_pci_tbl, + .probe = hpt34x_init_one, +}; + +static int hpt34x_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(hpt34x_ide_init); + +MODULE_AUTHOR("Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for Highpoint 34x IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c new file mode 100644 index 0000000..c8ee0b8 --- /dev/null +++ b/drivers/ide/pci/hpt366.c @@ -0,0 +1,1745 @@ +/* + * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003 + * + * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> + * Portions Copyright (C) 2001 Sun Microsystems, Inc. + * Portions Copyright (C) 2003 Red Hat Inc + * + * Thanks to HighPoint Technologies for their assistance, and hardware. + * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his + * donation of an ABit BP6 mainboard, processor, and memory acellerated + * development and support. + * + * Note that final HPT370 support was done by force extraction of GPL. + * + * - add function for getting/setting power status of drive + * - the HPT370's state machine can get confused. reset it before each dma + * xfer to prevent that from happening. + * - reset state engine whenever we get an error. + * - check for busmaster state at end of dma. + * - use new highpoint timings. + * - detect bus speed using highpoint register. + * - use pll if we don't have a clock table. added a 66MHz table that's + * just 2x the 33MHz table. + * - removed turnaround. NOTE: we never want to switch between pll and + * pci clocks as the chip can glitch in those cases. the highpoint + * approved workaround slows everything down too much to be useful. in + * addition, we would have to serialize access to each chip. + * Adrian Sun <a.sun@sun.com> + * + * add drive timings for 66MHz PCI bus, + * fix ATA Cable signal detection, fix incorrect /proc info + * add /proc display for per-drive PIO/DMA/UDMA mode and + * per-channel ATA-33/66 Cable detect. + * Duncan Laurie <void@sun.com> + * + * fixup /proc output for multiple controllers + * Tim Hockin <thockin@sun.com> + * + * On hpt366: + * Reset the hpt366 on error, reset on dma + * Fix disabling Fast Interrupt hpt366. + * Mike Waychison <crlf@sun.com> + * + * Added support for 372N clocking and clock switching. The 372N needs + * different clocks on read/write. This requires overloading rw_disk and + * other deeply crazy things. Thanks to <http://www.hoerstreich.de> for + * keeping me sane. + * Alan Cox <alan@redhat.com> + * + */ + + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ide.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/irq.h> + +/* various tuning parameters */ +#define HPT_RESET_STATE_ENGINE +#undef HPT_DELAY_INTERRUPT +#undef HPT_SERIALIZE_IO + +static const char *quirk_drives[] = { + "QUANTUM FIREBALLlct08 08", + "QUANTUM FIREBALLP KA6.4", + "QUANTUM FIREBALLP LM20.4", + "QUANTUM FIREBALLP LM20.5", + NULL +}; + +static const char *bad_ata100_5[] = { + "IBM-DTLA-307075", + "IBM-DTLA-307060", + "IBM-DTLA-307045", + "IBM-DTLA-307030", + "IBM-DTLA-307020", + "IBM-DTLA-307015", + "IBM-DTLA-305040", + "IBM-DTLA-305030", + "IBM-DTLA-305020", + "IC35L010AVER07-0", + "IC35L020AVER07-0", + "IC35L030AVER07-0", + "IC35L040AVER07-0", + "IC35L060AVER07-0", + "WDC AC310200R", + NULL +}; + +static const char *bad_ata66_4[] = { + "IBM-DTLA-307075", + "IBM-DTLA-307060", + "IBM-DTLA-307045", + "IBM-DTLA-307030", + "IBM-DTLA-307020", + "IBM-DTLA-307015", + "IBM-DTLA-305040", + "IBM-DTLA-305030", + "IBM-DTLA-305020", + "IC35L010AVER07-0", + "IC35L020AVER07-0", + "IC35L030AVER07-0", + "IC35L040AVER07-0", + "IC35L060AVER07-0", + "WDC AC310200R", + NULL +}; + +static const char *bad_ata66_3[] = { + "WDC AC310200R", + NULL +}; + +static const char *bad_ata33[] = { + "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2", + "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", + "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", + "Maxtor 90510D4", + "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2", + "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", + "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", + NULL +}; + +struct chipset_bus_clock_list_entry { + u8 xfer_speed; + unsigned int chipset_settings; +}; + +/* key for bus clock timings + * bit + * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file + * register access. + * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file + * register access. + * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer. + * during task file register access. + * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA + * xfer. + * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task + * register access. + * 28 UDMA enable + * 29 DMA enable + * 30 PIO_MST enable. if set, the chip is in bus master mode during + * PIO. + * 31 FIFO enable. + */ +static struct chipset_bus_clock_list_entry forty_base_hpt366[] = { + { XFER_UDMA_4, 0x900fd943 }, + { XFER_UDMA_3, 0x900ad943 }, + { XFER_UDMA_2, 0x900bd943 }, + { XFER_UDMA_1, 0x9008d943 }, + { XFER_UDMA_0, 0x9008d943 }, + + { XFER_MW_DMA_2, 0xa008d943 }, + { XFER_MW_DMA_1, 0xa010d955 }, + { XFER_MW_DMA_0, 0xa010d9fc }, + + { XFER_PIO_4, 0xc008d963 }, + { XFER_PIO_3, 0xc010d974 }, + { XFER_PIO_2, 0xc010d997 }, + { XFER_PIO_1, 0xc010d9c7 }, + { XFER_PIO_0, 0xc018d9d9 }, + { 0, 0x0120d9d9 } +}; + +static struct chipset_bus_clock_list_entry thirty_three_base_hpt366[] = { + { XFER_UDMA_4, 0x90c9a731 }, + { XFER_UDMA_3, 0x90cfa731 }, + { XFER_UDMA_2, 0x90caa731 }, + { XFER_UDMA_1, 0x90cba731 }, + { XFER_UDMA_0, 0x90c8a731 }, + + { XFER_MW_DMA_2, 0xa0c8a731 }, + { XFER_MW_DMA_1, 0xa0c8a732 }, /* 0xa0c8a733 */ + { XFER_MW_DMA_0, 0xa0c8a797 }, + + { XFER_PIO_4, 0xc0c8a731 }, + { XFER_PIO_3, 0xc0c8a742 }, + { XFER_PIO_2, 0xc0d0a753 }, + { XFER_PIO_1, 0xc0d0a7a3 }, /* 0xc0d0a793 */ + { XFER_PIO_0, 0xc0d0a7aa }, /* 0xc0d0a7a7 */ + { 0, 0x0120a7a7 } +}; + +static struct chipset_bus_clock_list_entry twenty_five_base_hpt366[] = { + { XFER_UDMA_4, 0x90c98521 }, + { XFER_UDMA_3, 0x90cf8521 }, + { XFER_UDMA_2, 0x90cf8521 }, + { XFER_UDMA_1, 0x90cb8521 }, + { XFER_UDMA_0, 0x90cb8521 }, + + { XFER_MW_DMA_2, 0xa0ca8521 }, + { XFER_MW_DMA_1, 0xa0ca8532 }, + { XFER_MW_DMA_0, 0xa0ca8575 }, + + { XFER_PIO_4, 0xc0ca8521 }, + { XFER_PIO_3, 0xc0ca8532 }, + { XFER_PIO_2, 0xc0ca8542 }, + { XFER_PIO_1, 0xc0d08572 }, + { XFER_PIO_0, 0xc0d08585 }, + { 0, 0x01208585 } +}; + +/* from highpoint documentation. these are old values */ +static struct chipset_bus_clock_list_entry thirty_three_base_hpt370[] = { +/* { XFER_UDMA_5, 0x1A85F442, 0x16454e31 }, */ + { XFER_UDMA_5, 0x16454e31 }, + { XFER_UDMA_4, 0x16454e31 }, + { XFER_UDMA_3, 0x166d4e31 }, + { XFER_UDMA_2, 0x16494e31 }, + { XFER_UDMA_1, 0x164d4e31 }, + { XFER_UDMA_0, 0x16514e31 }, + + { XFER_MW_DMA_2, 0x26514e21 }, + { XFER_MW_DMA_1, 0x26514e33 }, + { XFER_MW_DMA_0, 0x26514e97 }, + + { XFER_PIO_4, 0x06514e21 }, + { XFER_PIO_3, 0x06514e22 }, + { XFER_PIO_2, 0x06514e33 }, + { XFER_PIO_1, 0x06914e43 }, + { XFER_PIO_0, 0x06914e57 }, + { 0, 0x06514e57 } +}; + +static struct chipset_bus_clock_list_entry sixty_six_base_hpt370[] = { + { XFER_UDMA_5, 0x14846231 }, + { XFER_UDMA_4, 0x14886231 }, + { XFER_UDMA_3, 0x148c6231 }, + { XFER_UDMA_2, 0x148c6231 }, + { XFER_UDMA_1, 0x14906231 }, + { XFER_UDMA_0, 0x14986231 }, + + { XFER_MW_DMA_2, 0x26514e21 }, + { XFER_MW_DMA_1, 0x26514e33 }, + { XFER_MW_DMA_0, 0x26514e97 }, + + { XFER_PIO_4, 0x06514e21 }, + { XFER_PIO_3, 0x06514e22 }, + { XFER_PIO_2, 0x06514e33 }, + { XFER_PIO_1, 0x06914e43 }, + { XFER_PIO_0, 0x06914e57 }, + { 0, 0x06514e57 } +}; + +/* these are the current (4 sep 2001) timings from highpoint */ +static struct chipset_bus_clock_list_entry thirty_three_base_hpt370a[] = { + { XFER_UDMA_5, 0x12446231 }, + { XFER_UDMA_4, 0x12446231 }, + { XFER_UDMA_3, 0x126c6231 }, + { XFER_UDMA_2, 0x12486231 }, + { XFER_UDMA_1, 0x124c6233 }, + { XFER_UDMA_0, 0x12506297 }, + + { XFER_MW_DMA_2, 0x22406c31 }, + { XFER_MW_DMA_1, 0x22406c33 }, + { XFER_MW_DMA_0, 0x22406c97 }, + + { XFER_PIO_4, 0x06414e31 }, + { XFER_PIO_3, 0x06414e42 }, + { XFER_PIO_2, 0x06414e53 }, + { XFER_PIO_1, 0x06814e93 }, + { XFER_PIO_0, 0x06814ea7 }, + { 0, 0x06814ea7 } +}; + +/* 2x 33MHz timings */ +static struct chipset_bus_clock_list_entry sixty_six_base_hpt370a[] = { + { XFER_UDMA_5, 0x1488e673 }, + { XFER_UDMA_4, 0x1488e673 }, + { XFER_UDMA_3, 0x1498e673 }, + { XFER_UDMA_2, 0x1490e673 }, + { XFER_UDMA_1, 0x1498e677 }, + { XFER_UDMA_0, 0x14a0e73f }, + + { XFER_MW_DMA_2, 0x2480fa73 }, + { XFER_MW_DMA_1, 0x2480fa77 }, + { XFER_MW_DMA_0, 0x2480fb3f }, + + { XFER_PIO_4, 0x0c82be73 }, + { XFER_PIO_3, 0x0c82be95 }, + { XFER_PIO_2, 0x0c82beb7 }, + { XFER_PIO_1, 0x0d02bf37 }, + { XFER_PIO_0, 0x0d02bf5f }, + { 0, 0x0d02bf5f } +}; + +static struct chipset_bus_clock_list_entry fifty_base_hpt370a[] = { + { XFER_UDMA_5, 0x12848242 }, + { XFER_UDMA_4, 0x12ac8242 }, + { XFER_UDMA_3, 0x128c8242 }, + { XFER_UDMA_2, 0x120c8242 }, + { XFER_UDMA_1, 0x12148254 }, + { XFER_UDMA_0, 0x121882ea }, + + { XFER_MW_DMA_2, 0x22808242 }, + { XFER_MW_DMA_1, 0x22808254 }, + { XFER_MW_DMA_0, 0x228082ea }, + + { XFER_PIO_4, 0x0a81f442 }, + { XFER_PIO_3, 0x0a81f443 }, + { XFER_PIO_2, 0x0a81f454 }, + { XFER_PIO_1, 0x0ac1f465 }, + { XFER_PIO_0, 0x0ac1f48a }, + { 0, 0x0ac1f48a } +}; + +static struct chipset_bus_clock_list_entry thirty_three_base_hpt372[] = { + { XFER_UDMA_6, 0x1c81dc62 }, + { XFER_UDMA_5, 0x1c6ddc62 }, + { XFER_UDMA_4, 0x1c8ddc62 }, + { XFER_UDMA_3, 0x1c8edc62 }, /* checkme */ + { XFER_UDMA_2, 0x1c91dc62 }, + { XFER_UDMA_1, 0x1c9adc62 }, /* checkme */ + { XFER_UDMA_0, 0x1c82dc62 }, /* checkme */ + + { XFER_MW_DMA_2, 0x2c829262 }, + { XFER_MW_DMA_1, 0x2c829266 }, /* checkme */ + { XFER_MW_DMA_0, 0x2c82922e }, /* checkme */ + + { XFER_PIO_4, 0x0c829c62 }, + { XFER_PIO_3, 0x0c829c84 }, + { XFER_PIO_2, 0x0c829ca6 }, + { XFER_PIO_1, 0x0d029d26 }, + { XFER_PIO_0, 0x0d029d5e }, + { 0, 0x0d029d5e } +}; + +static struct chipset_bus_clock_list_entry fifty_base_hpt372[] = { + { XFER_UDMA_5, 0x12848242 }, + { XFER_UDMA_4, 0x12ac8242 }, + { XFER_UDMA_3, 0x128c8242 }, + { XFER_UDMA_2, 0x120c8242 }, + { XFER_UDMA_1, 0x12148254 }, + { XFER_UDMA_0, 0x121882ea }, + + { XFER_MW_DMA_2, 0x22808242 }, + { XFER_MW_DMA_1, 0x22808254 }, + { XFER_MW_DMA_0, 0x228082ea }, + + { XFER_PIO_4, 0x0a81f442 }, + { XFER_PIO_3, 0x0a81f443 }, + { XFER_PIO_2, 0x0a81f454 }, + { XFER_PIO_1, 0x0ac1f465 }, + { XFER_PIO_0, 0x0ac1f48a }, + { 0, 0x0a81f443 } +}; + +static struct chipset_bus_clock_list_entry sixty_six_base_hpt372[] = { + { XFER_UDMA_6, 0x1c869c62 }, + { XFER_UDMA_5, 0x1cae9c62 }, + { XFER_UDMA_4, 0x1c8a9c62 }, + { XFER_UDMA_3, 0x1c8e9c62 }, + { XFER_UDMA_2, 0x1c929c62 }, + { XFER_UDMA_1, 0x1c9a9c62 }, + { XFER_UDMA_0, 0x1c829c62 }, + + { XFER_MW_DMA_2, 0x2c829c62 }, + { XFER_MW_DMA_1, 0x2c829c66 }, + { XFER_MW_DMA_0, 0x2c829d2e }, + + { XFER_PIO_4, 0x0c829c62 }, + { XFER_PIO_3, 0x0c829c84 }, + { XFER_PIO_2, 0x0c829ca6 }, + { XFER_PIO_1, 0x0d029d26 }, + { XFER_PIO_0, 0x0d029d5e }, + { 0, 0x0d029d26 } +}; + +static struct chipset_bus_clock_list_entry thirty_three_base_hpt374[] = { + { XFER_UDMA_6, 0x12808242 }, + { XFER_UDMA_5, 0x12848242 }, + { XFER_UDMA_4, 0x12ac8242 }, + { XFER_UDMA_3, 0x128c8242 }, + { XFER_UDMA_2, 0x120c8242 }, + { XFER_UDMA_1, 0x12148254 }, + { XFER_UDMA_0, 0x121882ea }, + + { XFER_MW_DMA_2, 0x22808242 }, + { XFER_MW_DMA_1, 0x22808254 }, + { XFER_MW_DMA_0, 0x228082ea }, + + { XFER_PIO_4, 0x0a81f442 }, + { XFER_PIO_3, 0x0a81f443 }, + { XFER_PIO_2, 0x0a81f454 }, + { XFER_PIO_1, 0x0ac1f465 }, + { XFER_PIO_0, 0x0ac1f48a }, + { 0, 0x06814e93 } +}; + +/* FIXME: 50MHz timings for HPT374 */ + +#if 0 +static struct chipset_bus_clock_list_entry sixty_six_base_hpt374[] = { + { XFER_UDMA_6, 0x12406231 }, /* checkme */ + { XFER_UDMA_5, 0x12446231 }, /* 0x14846231 */ + { XFER_UDMA_4, 0x16814ea7 }, /* 0x14886231 */ + { XFER_UDMA_3, 0x16814ea7 }, /* 0x148c6231 */ + { XFER_UDMA_2, 0x16814ea7 }, /* 0x148c6231 */ + { XFER_UDMA_1, 0x16814ea7 }, /* 0x14906231 */ + { XFER_UDMA_0, 0x16814ea7 }, /* 0x14986231 */ + { XFER_MW_DMA_2, 0x16814ea7 }, /* 0x26514e21 */ + { XFER_MW_DMA_1, 0x16814ea7 }, /* 0x26514e97 */ + { XFER_MW_DMA_0, 0x16814ea7 }, /* 0x26514e97 */ + { XFER_PIO_4, 0x06814ea7 }, /* 0x06514e21 */ + { XFER_PIO_3, 0x06814ea7 }, /* 0x06514e22 */ + { XFER_PIO_2, 0x06814ea7 }, /* 0x06514e33 */ + { XFER_PIO_1, 0x06814ea7 }, /* 0x06914e43 */ + { XFER_PIO_0, 0x06814ea7 }, /* 0x06914e57 */ + { 0, 0x06814ea7 } +}; +#endif + +#define HPT366_DEBUG_DRIVE_INFO 0 +#define HPT374_ALLOW_ATA133_6 0 +#define HPT371_ALLOW_ATA133_6 0 +#define HPT302_ALLOW_ATA133_6 0 +#define HPT372_ALLOW_ATA133_6 1 +#define HPT370_ALLOW_ATA100_5 1 +#define HPT366_ALLOW_ATA66_4 1 +#define HPT366_ALLOW_ATA66_3 1 +#define HPT366_MAX_DEVS 8 + +#define F_LOW_PCI_33 0x23 +#define F_LOW_PCI_40 0x29 +#define F_LOW_PCI_50 0x2d +#define F_LOW_PCI_66 0x42 + +/* FIXME: compare with driver's code before removing */ +#if 0 + if (hpt_minimum_revision(dev, 3)) { + u8 cbl; + cbl = inb(iobase + 0x7b); + outb(cbl | 1, iobase + 0x7b); + outb(cbl & ~1, iobase + 0x7b); + cbl = inb(iobase + 0x7a); + p += sprintf(p, "Cable: ATA-%d" + " ATA-%d\n", + (cbl & 0x02) ? 33 : 66, + (cbl & 0x01) ? 33 : 66); + p += sprintf(p, "\n"); + } + { + u8 c2, c3; + /* older revs don't have these registers mapped + * into io space */ + pci_read_config_byte(dev, 0x43, &c0); + pci_read_config_byte(dev, 0x47, &c1); + pci_read_config_byte(dev, 0x4b, &c2); + pci_read_config_byte(dev, 0x4f, &c3); + + p += sprintf(p, "Mode: %s %s" + " %s %s\n", + (c0 & 0x10) ? "UDMA" : (c0 & 0x20) ? "DMA " : + (c0 & 0x80) ? "PIO " : "off ", + (c1 & 0x10) ? "UDMA" : (c1 & 0x20) ? "DMA " : + (c1 & 0x80) ? "PIO " : "off ", + (c2 & 0x10) ? "UDMA" : (c2 & 0x20) ? "DMA " : + (c2 & 0x80) ? "PIO " : "off ", + (c3 & 0x10) ? "UDMA" : (c3 & 0x20) ? "DMA " : + (c3 & 0x80) ? "PIO " : "off "); + } + } +#endif + +static u32 hpt_revision (struct pci_dev *dev) +{ + u32 class_rev; + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + + switch(dev->device) { + /* Remap new 372N onto 372 */ + case PCI_DEVICE_ID_TTI_HPT372N: + class_rev = PCI_DEVICE_ID_TTI_HPT372; break; + case PCI_DEVICE_ID_TTI_HPT374: + class_rev = PCI_DEVICE_ID_TTI_HPT374; break; + case PCI_DEVICE_ID_TTI_HPT371: + class_rev = PCI_DEVICE_ID_TTI_HPT371; break; + case PCI_DEVICE_ID_TTI_HPT302: + class_rev = PCI_DEVICE_ID_TTI_HPT302; break; + case PCI_DEVICE_ID_TTI_HPT372: + class_rev = PCI_DEVICE_ID_TTI_HPT372; break; + default: + break; + } + return class_rev; +} + +static u32 hpt_minimum_revision (struct pci_dev *dev, int revision) +{ + unsigned int class_rev = hpt_revision(dev); + revision--; + return ((int) (class_rev > revision) ? 1 : 0); +} + +static int check_in_drive_lists(ide_drive_t *drive, const char **list); + +static u8 hpt3xx_ratemask (ide_drive_t *drive) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + u8 mode = 0; + + if (hpt_minimum_revision(dev, 8)) { /* HPT374 */ + mode = (HPT374_ALLOW_ATA133_6) ? 4 : 3; + } else if (hpt_minimum_revision(dev, 7)) { /* HPT371 */ + mode = (HPT371_ALLOW_ATA133_6) ? 4 : 3; + } else if (hpt_minimum_revision(dev, 6)) { /* HPT302 */ + mode = (HPT302_ALLOW_ATA133_6) ? 4 : 3; + } else if (hpt_minimum_revision(dev, 5)) { /* HPT372 */ + mode = (HPT372_ALLOW_ATA133_6) ? 4 : 3; + } else if (hpt_minimum_revision(dev, 4)) { /* HPT370A */ + mode = (HPT370_ALLOW_ATA100_5) ? 3 : 2; + } else if (hpt_minimum_revision(dev, 3)) { /* HPT370 */ + mode = (HPT370_ALLOW_ATA100_5) ? 3 : 2; + mode = (check_in_drive_lists(drive, bad_ata33)) ? 0 : mode; + } else { /* HPT366 and HPT368 */ + mode = (check_in_drive_lists(drive, bad_ata33)) ? 0 : 2; + } + if (!eighty_ninty_three(drive) && (mode)) + mode = min(mode, (u8)1); + return mode; +} + +/* + * Note for the future; the SATA hpt37x we must set + * either PIO or UDMA modes 0,4,5 + */ + +static u8 hpt3xx_ratefilter (ide_drive_t *drive, u8 speed) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + u8 mode = hpt3xx_ratemask(drive); + + if (drive->media != ide_disk) + return min(speed, (u8)XFER_PIO_4); + + switch(mode) { + case 0x04: + speed = min(speed, (u8)XFER_UDMA_6); + break; + case 0x03: + speed = min(speed, (u8)XFER_UDMA_5); + if (hpt_minimum_revision(dev, 5)) + break; + if (check_in_drive_lists(drive, bad_ata100_5)) + speed = min(speed, (u8)XFER_UDMA_4); + break; + case 0x02: + speed = min(speed, (u8)XFER_UDMA_4); + /* + * CHECK ME, Does this need to be set to 5 ?? + */ + if (hpt_minimum_revision(dev, 3)) + break; + if ((check_in_drive_lists(drive, bad_ata66_4)) || + (!(HPT366_ALLOW_ATA66_4))) + speed = min(speed, (u8)XFER_UDMA_3); + if ((check_in_drive_lists(drive, bad_ata66_3)) || + (!(HPT366_ALLOW_ATA66_3))) + speed = min(speed, (u8)XFER_UDMA_2); + break; + case 0x01: + speed = min(speed, (u8)XFER_UDMA_2); + /* + * CHECK ME, Does this need to be set to 5 ?? + */ + if (hpt_minimum_revision(dev, 3)) + break; + if (check_in_drive_lists(drive, bad_ata33)) + speed = min(speed, (u8)XFER_MW_DMA_2); + break; + case 0x00: + default: + speed = min(speed, (u8)XFER_MW_DMA_2); + break; + } + return speed; +} + +static int check_in_drive_lists (ide_drive_t *drive, const char **list) +{ + struct hd_driveid *id = drive->id; + + if (quirk_drives == list) { + while (*list) + if (strstr(id->model, *list++)) + return 1; + } else { + while (*list) + if (!strcmp(*list++,id->model)) + return 1; + } + return 0; +} + +static unsigned int pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table) +{ + for ( ; chipset_table->xfer_speed ; chipset_table++) + if (chipset_table->xfer_speed == speed) + return chipset_table->chipset_settings; + return chipset_table->chipset_settings; +} + +static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + u8 speed = hpt3xx_ratefilter(drive, xferspeed); +// u8 speed = ide_rate_filter(hpt3xx_ratemask(drive), xferspeed); + u8 regtime = (drive->select.b.unit & 0x01) ? 0x44 : 0x40; + u8 regfast = (HWIF(drive)->channel) ? 0x55 : 0x51; + u8 drive_fast = 0; + u32 reg1 = 0, reg2 = 0; + + /* + * Disable the "fast interrupt" prediction. + */ + pci_read_config_byte(dev, regfast, &drive_fast); +#if 0 + if (drive_fast & 0x02) + pci_write_config_byte(dev, regfast, drive_fast & ~0x20); +#else + if (drive_fast & 0x80) + pci_write_config_byte(dev, regfast, drive_fast & ~0x80); +#endif + + reg2 = pci_bus_clock_list(speed, + (struct chipset_bus_clock_list_entry *) pci_get_drvdata(dev)); + /* + * Disable on-chip PIO FIFO/buffer + * (to avoid problems handling I/O errors later) + */ + pci_read_config_dword(dev, regtime, ®1); + if (speed >= XFER_MW_DMA_0) { + reg2 = (reg2 & ~0xc0000000) | (reg1 & 0xc0000000); + } else { + reg2 = (reg2 & ~0x30070000) | (reg1 & 0x30070000); + } + reg2 &= ~0x80000000; + + pci_write_config_dword(dev, regtime, reg2); + + return ide_config_drive_speed(drive, speed); +} + +static int hpt370_tune_chipset(ide_drive_t *drive, u8 xferspeed) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + u8 speed = hpt3xx_ratefilter(drive, xferspeed); +// u8 speed = ide_rate_filter(hpt3xx_ratemask(drive), xferspeed); + u8 regfast = (HWIF(drive)->channel) ? 0x55 : 0x51; + u8 drive_pci = 0x40 + (drive->dn * 4); + u8 new_fast = 0, drive_fast = 0; + u32 list_conf = 0, drive_conf = 0; + u32 conf_mask = (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000; + + /* + * Disable the "fast interrupt" prediction. + * don't holdoff on interrupts. (== 0x01 despite what the docs say) + */ + pci_read_config_byte(dev, regfast, &drive_fast); + new_fast = drive_fast; + if (new_fast & 0x02) + new_fast &= ~0x02; + +#ifdef HPT_DELAY_INTERRUPT + if (new_fast & 0x01) + new_fast &= ~0x01; +#else + if ((new_fast & 0x01) == 0) + new_fast |= 0x01; +#endif + if (new_fast != drive_fast) + pci_write_config_byte(dev, regfast, new_fast); + + list_conf = pci_bus_clock_list(speed, + (struct chipset_bus_clock_list_entry *) + pci_get_drvdata(dev)); + + pci_read_config_dword(dev, drive_pci, &drive_conf); + list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask); + + if (speed < XFER_MW_DMA_0) { + list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */ + } + + pci_write_config_dword(dev, drive_pci, list_conf); + + return ide_config_drive_speed(drive, speed); +} + +static int hpt372_tune_chipset(ide_drive_t *drive, u8 xferspeed) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + u8 speed = hpt3xx_ratefilter(drive, xferspeed); +// u8 speed = ide_rate_filter(hpt3xx_ratemask(drive), xferspeed); + u8 regfast = (HWIF(drive)->channel) ? 0x55 : 0x51; + u8 drive_fast = 0, drive_pci = 0x40 + (drive->dn * 4); + u32 list_conf = 0, drive_conf = 0; + u32 conf_mask = (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000; + + /* + * Disable the "fast interrupt" prediction. + * don't holdoff on interrupts. (== 0x01 despite what the docs say) + */ + pci_read_config_byte(dev, regfast, &drive_fast); + drive_fast &= ~0x07; + pci_write_config_byte(dev, regfast, drive_fast); + + list_conf = pci_bus_clock_list(speed, + (struct chipset_bus_clock_list_entry *) + pci_get_drvdata(dev)); + pci_read_config_dword(dev, drive_pci, &drive_conf); + list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask); + if (speed < XFER_MW_DMA_0) + list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */ + pci_write_config_dword(dev, drive_pci, list_conf); + + return ide_config_drive_speed(drive, speed); +} + +static int hpt3xx_tune_chipset (ide_drive_t *drive, u8 speed) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + + if (hpt_minimum_revision(dev, 8)) + return hpt372_tune_chipset(drive, speed); /* not a typo */ +#if 0 + else if (hpt_minimum_revision(dev, 7)) + hpt371_tune_chipset(drive, speed); + else if (hpt_minimum_revision(dev, 6)) + hpt302_tune_chipset(drive, speed); +#endif + else if (hpt_minimum_revision(dev, 5)) + return hpt372_tune_chipset(drive, speed); + else if (hpt_minimum_revision(dev, 3)) + return hpt370_tune_chipset(drive, speed); + else /* hpt368: hpt_minimum_revision(dev, 2) */ + return hpt36x_tune_chipset(drive, speed); +} + +static void hpt3xx_tune_drive (ide_drive_t *drive, u8 pio) +{ + pio = ide_get_best_pio_mode(drive, 255, pio, NULL); + (void) hpt3xx_tune_chipset(drive, (XFER_PIO_0 + pio)); +} + +/* + * This allows the configuration of ide_pci chipset registers + * for cards that learn about the drive's UDMA, DMA, PIO capabilities + * after the drive is reported by the OS. Initially for designed for + * HPT366 UDMA chipset by HighPoint|Triones Technologies, Inc. + * + * check_in_drive_lists(drive, bad_ata66_4) + * check_in_drive_lists(drive, bad_ata66_3) + * check_in_drive_lists(drive, bad_ata33) + * + */ +static int config_chipset_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, hpt3xx_ratemask(drive)); + + if (!(speed)) + return 0; + + (void) hpt3xx_tune_chipset(drive, speed); + return ide_dma_enable(drive); +} + +static int hpt3xx_quirkproc (ide_drive_t *drive) +{ + return ((int) check_in_drive_lists(drive, quirk_drives)); +} + +static void hpt3xx_intrproc (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + + if (drive->quirk_list) + return; + /* drives in the quirk_list may not like intr setups/cleanups */ + hwif->OUTB(drive->ctl|2, IDE_CONTROL_REG); +} + +static void hpt3xx_maskproc (ide_drive_t *drive, int mask) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + + if (drive->quirk_list) { + if (hpt_minimum_revision(dev,3)) { + u8 reg5a = 0; + pci_read_config_byte(dev, 0x5a, ®5a); + if (((reg5a & 0x10) >> 4) != mask) + pci_write_config_byte(dev, 0x5a, mask ? (reg5a | 0x10) : (reg5a & ~0x10)); + } else { + if (mask) { + disable_irq(HWIF(drive)->irq); + } else { + enable_irq(HWIF(drive)->irq); + } + } + } else { + if (IDE_CONTROL_REG) + HWIF(drive)->OUTB(mask ? (drive->ctl | 2) : + (drive->ctl & ~2), + IDE_CONTROL_REG); + } +} + +static int hpt366_config_drive_xfer_rate (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + drive->init_speed = 0; + + if (id && (id->capability & 1) && drive->autodma) { + + if (ide_use_dma(drive)) { + if (config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + hpt3xx_tune_drive(drive, 5); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +/* + * This is specific to the HPT366 UDMA bios chipset + * by HighPoint|Triones Technologies, Inc. + */ +static int hpt366_ide_dma_lostirq (ide_drive_t *drive) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + u8 reg50h = 0, reg52h = 0, reg5ah = 0; + + pci_read_config_byte(dev, 0x50, ®50h); + pci_read_config_byte(dev, 0x52, ®52h); + pci_read_config_byte(dev, 0x5a, ®5ah); + printk("%s: (%s) reg50h=0x%02x, reg52h=0x%02x, reg5ah=0x%02x\n", + drive->name, __FUNCTION__, reg50h, reg52h, reg5ah); + if (reg5ah & 0x10) + pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10); +#if 0 + /* how about we flush and reset, mmmkay? */ + pci_write_config_byte(dev, 0x51, 0x1F); + /* fall through to a reset */ + case dma_start: + case ide_dma_end: + /* reset the chips state over and over.. */ + pci_write_config_byte(dev, 0x51, 0x13); +#endif + return __ide_dma_lostirq(drive); +} + +static void hpt370_clear_engine (ide_drive_t *drive) +{ + u8 regstate = HWIF(drive)->channel ? 0x54 : 0x50; + pci_write_config_byte(HWIF(drive)->pci_dev, regstate, 0x37); + udelay(10); +} + +static void hpt370_ide_dma_start(ide_drive_t *drive) +{ +#ifdef HPT_RESET_STATE_ENGINE + hpt370_clear_engine(drive); +#endif + ide_dma_start(drive); +} + +static int hpt370_ide_dma_end (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 dma_stat = hwif->INB(hwif->dma_status); + + if (dma_stat & 0x01) { + /* wait a little */ + udelay(20); + dma_stat = hwif->INB(hwif->dma_status); + } + if ((dma_stat & 0x01) != 0) + /* fallthrough */ + (void) HWIF(drive)->ide_dma_timeout(drive); + + return __ide_dma_end(drive); +} + +static void hpt370_lostirq_timeout (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 bfifo = 0, reginfo = hwif->channel ? 0x56 : 0x52; + u8 dma_stat = 0, dma_cmd = 0; + + pci_read_config_byte(HWIF(drive)->pci_dev, reginfo, &bfifo); + printk("%s: %d bytes in FIFO\n", drive->name, bfifo); + hpt370_clear_engine(drive); + /* get dma command mode */ + dma_cmd = hwif->INB(hwif->dma_command); + /* stop dma */ + hwif->OUTB(dma_cmd & ~0x1, hwif->dma_command); + dma_stat = hwif->INB(hwif->dma_status); + /* clear errors */ + hwif->OUTB(dma_stat | 0x6, hwif->dma_status); +} + +static int hpt370_ide_dma_timeout (ide_drive_t *drive) +{ + hpt370_lostirq_timeout(drive); + hpt370_clear_engine(drive); + return __ide_dma_timeout(drive); +} + +static int hpt370_ide_dma_lostirq (ide_drive_t *drive) +{ + hpt370_lostirq_timeout(drive); + hpt370_clear_engine(drive); + return __ide_dma_lostirq(drive); +} + +/* returns 1 if DMA IRQ issued, 0 otherwise */ +static int hpt374_ide_dma_test_irq(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u16 bfifo = 0; + u8 reginfo = hwif->channel ? 0x56 : 0x52; + u8 dma_stat; + + pci_read_config_word(hwif->pci_dev, reginfo, &bfifo); + if (bfifo & 0x1FF) { +// printk("%s: %d bytes in FIFO\n", drive->name, bfifo); + return 0; + } + + dma_stat = hwif->INB(hwif->dma_status); + /* return 1 if INTR asserted */ + if ((dma_stat & 4) == 4) + return 1; + + if (!drive->waiting_for_dma) + printk(KERN_WARNING "%s: (%s) called while not waiting\n", + drive->name, __FUNCTION__); + return 0; +} + +static int hpt374_ide_dma_end (ide_drive_t *drive) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + ide_hwif_t *hwif = HWIF(drive); + u8 msc_stat = 0, mscreg = hwif->channel ? 0x54 : 0x50; + u8 bwsr_stat = 0, bwsr_mask = hwif->channel ? 0x02 : 0x01; + + pci_read_config_byte(dev, 0x6a, &bwsr_stat); + pci_read_config_byte(dev, mscreg, &msc_stat); + if ((bwsr_stat & bwsr_mask) == bwsr_mask) + pci_write_config_byte(dev, mscreg, msc_stat|0x30); + return __ide_dma_end(drive); +} + +/** + * hpt372n_set_clock - perform clock switching dance + * @drive: Drive to switch + * @mode: Switching mode (0x21 for write, 0x23 otherwise) + * + * Switch the DPLL clock on the HPT372N devices. This is a + * right mess. + */ + +static void hpt372n_set_clock(ide_drive_t *drive, int mode) +{ + ide_hwif_t *hwif = HWIF(drive); + + /* FIXME: should we check for DMA active and BUG() */ + /* Tristate the bus */ + outb(0x80, hwif->dma_base+0x73); + outb(0x80, hwif->dma_base+0x77); + + /* Switch clock and reset channels */ + outb(mode, hwif->dma_base+0x7B); + outb(0xC0, hwif->dma_base+0x79); + + /* Reset state machines */ + outb(0x37, hwif->dma_base+0x70); + outb(0x37, hwif->dma_base+0x74); + + /* Complete reset */ + outb(0x00, hwif->dma_base+0x79); + + /* Reconnect channels to bus */ + outb(0x00, hwif->dma_base+0x73); + outb(0x00, hwif->dma_base+0x77); +} + +/** + * hpt372n_rw_disk - prepare for I/O + * @drive: drive for command + * @rq: block request structure + * + * This is called when a disk I/O is issued to the 372N. + * We need it because of the clock switching. + */ + +static void hpt372n_rw_disk(ide_drive_t *drive, struct request *rq) +{ + ide_hwif_t *hwif = drive->hwif; + int wantclock; + + wantclock = rq_data_dir(rq) ? 0x23 : 0x21; + + if (hwif->config_data != wantclock) { + hpt372n_set_clock(drive, wantclock); + hwif->config_data = wantclock; + } +} + +/* + * Since SUN Cobalt is attempting to do this operation, I should disclose + * this has been a long time ago Thu Jul 27 16:40:57 2000 was the patch date + * HOTSWAP ATA Infrastructure. + */ + +static void hpt3xx_reset (ide_drive_t *drive) +{ +#if 0 + unsigned long high_16 = pci_resource_start(HWIF(drive)->pci_dev, 4); + u8 reset = (HWIF(drive)->channel) ? 0x80 : 0x40; + u8 reg59h = 0; + + pci_read_config_byte(HWIF(drive)->pci_dev, 0x59, ®59h); + pci_write_config_byte(HWIF(drive)->pci_dev, 0x59, reg59h|reset); + pci_write_config_byte(HWIF(drive)->pci_dev, 0x59, reg59h); +#endif +} + +static int hpt3xx_tristate (ide_drive_t * drive, int state) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 reg59h = 0, reset = (hwif->channel) ? 0x80 : 0x40; + u8 regXXh = 0, state_reg= (hwif->channel) ? 0x57 : 0x53; + +// hwif->bus_state = state; + + pci_read_config_byte(dev, 0x59, ®59h); + pci_read_config_byte(dev, state_reg, ®XXh); + + if (state) { + (void) ide_do_reset(drive); + pci_write_config_byte(dev, state_reg, regXXh|0x80); + pci_write_config_byte(dev, 0x59, reg59h|reset); + } else { + pci_write_config_byte(dev, 0x59, reg59h & ~(reset)); + pci_write_config_byte(dev, state_reg, regXXh & ~(0x80)); + (void) ide_do_reset(drive); + } + return 0; +} + +/* + * set/get power state for a drive. + * turning the power off does the following things: + * 1) soft-reset the drive + * 2) tri-states the ide bus + * + * when we turn things back on, we need to re-initialize things. + */ +#define TRISTATE_BIT 0x8000 +static int hpt370_busproc(ide_drive_t * drive, int state) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 tristate = 0, resetmask = 0, bus_reg = 0; + u16 tri_reg; + + hwif->bus_state = state; + + if (hwif->channel) { + /* secondary channel */ + tristate = 0x56; + resetmask = 0x80; + } else { + /* primary channel */ + tristate = 0x52; + resetmask = 0x40; + } + + /* grab status */ + pci_read_config_word(dev, tristate, &tri_reg); + pci_read_config_byte(dev, 0x59, &bus_reg); + + /* set the state. we don't set it if we don't need to do so. + * make sure that the drive knows that it has failed if it's off */ + switch (state) { + case BUSSTATE_ON: + hwif->drives[0].failures = 0; + hwif->drives[1].failures = 0; + if ((bus_reg & resetmask) == 0) + return 0; + tri_reg &= ~TRISTATE_BIT; + bus_reg &= ~resetmask; + break; + case BUSSTATE_OFF: + hwif->drives[0].failures = hwif->drives[0].max_failures + 1; + hwif->drives[1].failures = hwif->drives[1].max_failures + 1; + if ((tri_reg & TRISTATE_BIT) == 0 && (bus_reg & resetmask)) + return 0; + tri_reg &= ~TRISTATE_BIT; + bus_reg |= resetmask; + break; + case BUSSTATE_TRISTATE: + hwif->drives[0].failures = hwif->drives[0].max_failures + 1; + hwif->drives[1].failures = hwif->drives[1].max_failures + 1; + if ((tri_reg & TRISTATE_BIT) && (bus_reg & resetmask)) + return 0; + tri_reg |= TRISTATE_BIT; + bus_reg |= resetmask; + break; + } + pci_write_config_byte(dev, 0x59, bus_reg); + pci_write_config_word(dev, tristate, tri_reg); + + return 0; +} + +static int __devinit init_hpt37x(struct pci_dev *dev) +{ + int adjust, i; + u16 freq; + u32 pll; + u8 reg5bh; + u8 reg5ah = 0; + unsigned long dmabase = pci_resource_start(dev, 4); + u8 did, rid; + int is_372n = 0; + + pci_read_config_byte(dev, 0x5a, ®5ah); + /* interrupt force enable */ + pci_write_config_byte(dev, 0x5a, (reg5ah & ~0x10)); + + if(dmabase) + { + did = inb(dmabase + 0x22); + rid = inb(dmabase + 0x28); + + if((did == 4 && rid == 6) || (did == 5 && rid > 1)) + is_372n = 1; + } + + /* + * default to pci clock. make sure MA15/16 are set to output + * to prevent drives having problems with 40-pin cables. + */ + pci_write_config_byte(dev, 0x5b, 0x23); + + /* + * set up the PLL. we need to adjust it so that it's stable. + * freq = Tpll * 192 / Tpci + * + * Todo. For non x86 should probably check the dword is + * set to 0xABCDExxx indicating the BIOS saved f_CNT + */ + pci_read_config_word(dev, 0x78, &freq); + freq &= 0x1FF; + + /* + * The 372N uses different PCI clock information and has + * some other complications + * On PCI33 timing we must clock switch + * On PCI66 timing we must NOT use the PCI clock + * + * Currently we always set up the PLL for the 372N + */ + + pci_set_drvdata(dev, NULL); + + if(is_372n) + { + printk(KERN_INFO "hpt: HPT372N detected, using 372N timing.\n"); + if(freq < 0x55) + pll = F_LOW_PCI_33; + else if(freq < 0x70) + pll = F_LOW_PCI_40; + else if(freq < 0x7F) + pll = F_LOW_PCI_50; + else + pll = F_LOW_PCI_66; + + printk(KERN_INFO "FREQ: %d PLL: %d\n", freq, pll); + + /* We always use the pll not the PCI clock on 372N */ + } + else + { + if(freq < 0x9C) + pll = F_LOW_PCI_33; + else if(freq < 0xb0) + pll = F_LOW_PCI_40; + else if(freq <0xc8) + pll = F_LOW_PCI_50; + else + pll = F_LOW_PCI_66; + + if (pll == F_LOW_PCI_33) { + if (hpt_minimum_revision(dev,8)) + pci_set_drvdata(dev, (void *) thirty_three_base_hpt374); + else if (hpt_minimum_revision(dev,5)) + pci_set_drvdata(dev, (void *) thirty_three_base_hpt372); + else if (hpt_minimum_revision(dev,4)) + pci_set_drvdata(dev, (void *) thirty_three_base_hpt370a); + else + pci_set_drvdata(dev, (void *) thirty_three_base_hpt370); + printk("HPT37X: using 33MHz PCI clock\n"); + } else if (pll == F_LOW_PCI_40) { + /* Unsupported */ + } else if (pll == F_LOW_PCI_50) { + if (hpt_minimum_revision(dev,8)) + pci_set_drvdata(dev, (void *) fifty_base_hpt370a); + else if (hpt_minimum_revision(dev,5)) + pci_set_drvdata(dev, (void *) fifty_base_hpt372); + else if (hpt_minimum_revision(dev,4)) + pci_set_drvdata(dev, (void *) fifty_base_hpt370a); + else + pci_set_drvdata(dev, (void *) fifty_base_hpt370a); + printk("HPT37X: using 50MHz PCI clock\n"); + } else { + if (hpt_minimum_revision(dev,8)) + { + printk(KERN_ERR "HPT37x: 66MHz timings are not supported.\n"); + } + else if (hpt_minimum_revision(dev,5)) + pci_set_drvdata(dev, (void *) sixty_six_base_hpt372); + else if (hpt_minimum_revision(dev,4)) + pci_set_drvdata(dev, (void *) sixty_six_base_hpt370a); + else + pci_set_drvdata(dev, (void *) sixty_six_base_hpt370); + printk("HPT37X: using 66MHz PCI clock\n"); + } + } + + /* + * only try the pll if we don't have a table for the clock + * speed that we're running at. NOTE: the internal PLL will + * result in slow reads when using a 33MHz PCI clock. we also + * don't like to use the PLL because it will cause glitches + * on PRST/SRST when the HPT state engine gets reset. + */ + if (pci_get_drvdata(dev)) + goto init_hpt37X_done; + + /* + * adjust PLL based upon PCI clock, enable it, and wait for + * stabilization. + */ + adjust = 0; + freq = (pll < F_LOW_PCI_50) ? 2 : 4; + while (adjust++ < 6) { + pci_write_config_dword(dev, 0x5c, (freq + pll) << 16 | + pll | 0x100); + + /* wait for clock stabilization */ + for (i = 0; i < 0x50000; i++) { + pci_read_config_byte(dev, 0x5b, ®5bh); + if (reg5bh & 0x80) { + /* spin looking for the clock to destabilize */ + for (i = 0; i < 0x1000; ++i) { + pci_read_config_byte(dev, 0x5b, + ®5bh); + if ((reg5bh & 0x80) == 0) + goto pll_recal; + } + pci_read_config_dword(dev, 0x5c, &pll); + pci_write_config_dword(dev, 0x5c, + pll & ~0x100); + pci_write_config_byte(dev, 0x5b, 0x21); + if (hpt_minimum_revision(dev,8)) + pci_set_drvdata(dev, (void *) fifty_base_hpt370a); + else if (hpt_minimum_revision(dev,5)) + pci_set_drvdata(dev, (void *) fifty_base_hpt372); + else if (hpt_minimum_revision(dev,4)) + pci_set_drvdata(dev, (void *) fifty_base_hpt370a); + else + pci_set_drvdata(dev, (void *) fifty_base_hpt370a); + printk("HPT37X: using 50MHz internal PLL\n"); + goto init_hpt37X_done; + } + } +pll_recal: + if (adjust & 1) + pll -= (adjust >> 1); + else + pll += (adjust >> 1); + } + +init_hpt37X_done: + /* reset state engine */ + pci_write_config_byte(dev, 0x50, 0x37); + pci_write_config_byte(dev, 0x54, 0x37); + udelay(100); + return 0; +} + +static int __devinit init_hpt366(struct pci_dev *dev) +{ + u32 reg1 = 0; + u8 drive_fast = 0; + + /* + * Disable the "fast interrupt" prediction. + */ + pci_read_config_byte(dev, 0x51, &drive_fast); + if (drive_fast & 0x80) + pci_write_config_byte(dev, 0x51, drive_fast & ~0x80); + pci_read_config_dword(dev, 0x40, ®1); + + /* detect bus speed by looking at control reg timing: */ + switch((reg1 >> 8) & 7) { + case 5: + pci_set_drvdata(dev, (void *) forty_base_hpt366); + break; + case 9: + pci_set_drvdata(dev, (void *) twenty_five_base_hpt366); + break; + case 7: + default: + pci_set_drvdata(dev, (void *) thirty_three_base_hpt366); + break; + } + + if (!pci_get_drvdata(dev)) + { + printk(KERN_ERR "hpt366: unknown bus timing.\n"); + pci_set_drvdata(dev, NULL); + } + return 0; +} + +static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const char *name) +{ + int ret = 0; + u8 test = 0; + + if (dev->resource[PCI_ROM_RESOURCE].start) + pci_write_config_byte(dev, PCI_ROM_ADDRESS, + dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); + + pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &test); + if (test != (L1_CACHE_BYTES / 4)) + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, + (L1_CACHE_BYTES / 4)); + + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &test); + if (test != 0x78) + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); + + pci_read_config_byte(dev, PCI_MIN_GNT, &test); + if (test != 0x08) + pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); + + pci_read_config_byte(dev, PCI_MAX_LAT, &test); + if (test != 0x08) + pci_write_config_byte(dev, PCI_MAX_LAT, 0x08); + + if (hpt_minimum_revision(dev, 3)) { + ret = init_hpt37x(dev); + } else { + ret =init_hpt366(dev); + } + if (ret) + return ret; + + return dev->irq; +} + +static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + u8 ata66 = 0, regmask = (hwif->channel) ? 0x01 : 0x02; + u8 did, rid; + unsigned long dmabase = hwif->dma_base; + int is_372n = 0; + + if(dmabase) + { + did = inb(dmabase + 0x22); + rid = inb(dmabase + 0x28); + + if((did == 4 && rid == 6) || (did == 5 && rid > 1)) + is_372n = 1; + } + + hwif->tuneproc = &hpt3xx_tune_drive; + hwif->speedproc = &hpt3xx_tune_chipset; + hwif->quirkproc = &hpt3xx_quirkproc; + hwif->intrproc = &hpt3xx_intrproc; + hwif->maskproc = &hpt3xx_maskproc; + + if(is_372n) + hwif->rw_disk = &hpt372n_rw_disk; + + /* + * The HPT37x uses the CBLID pins as outputs for MA15/MA16 + * address lines to access an external eeprom. To read valid + * cable detect state the pins must be enabled as inputs. + */ + if (hpt_minimum_revision(dev, 8) && PCI_FUNC(dev->devfn) & 1) { + /* + * HPT374 PCI function 1 + * - set bit 15 of reg 0x52 to enable TCBLID as input + * - set bit 15 of reg 0x56 to enable FCBLID as input + */ + u16 mcr3, mcr6; + pci_read_config_word(dev, 0x52, &mcr3); + pci_read_config_word(dev, 0x56, &mcr6); + pci_write_config_word(dev, 0x52, mcr3 | 0x8000); + pci_write_config_word(dev, 0x56, mcr6 | 0x8000); + /* now read cable id register */ + pci_read_config_byte(dev, 0x5a, &ata66); + pci_write_config_word(dev, 0x52, mcr3); + pci_write_config_word(dev, 0x56, mcr6); + } else if (hpt_minimum_revision(dev, 3)) { + /* + * HPT370/372 and 374 pcifn 0 + * - clear bit 0 of 0x5b to enable P/SCBLID as inputs + */ + u8 scr2; + pci_read_config_byte(dev, 0x5b, &scr2); + pci_write_config_byte(dev, 0x5b, scr2 & ~1); + /* now read cable id register */ + pci_read_config_byte(dev, 0x5a, &ata66); + pci_write_config_byte(dev, 0x5b, scr2); + } else { + pci_read_config_byte(dev, 0x5a, &ata66); + } + +#ifdef DEBUG + printk("HPT366: reg5ah=0x%02x ATA-%s Cable Port%d\n", + ata66, (ata66 & regmask) ? "33" : "66", + PCI_FUNC(hwif->pci_dev->devfn)); +#endif /* DEBUG */ + +#ifdef HPT_SERIALIZE_IO + /* serialize access to this device */ + if (hwif->mate) + hwif->serialized = hwif->mate->serialized = 1; +#endif + + if (hpt_minimum_revision(dev,3)) { + u8 reg5ah = 0; + pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10); + /* + * set up ioctl for power status. + * note: power affects both + * drives on each channel + */ + hwif->resetproc = &hpt3xx_reset; + hwif->busproc = &hpt370_busproc; +// hwif->drives[0].autotune = hwif->drives[1].autotune = 1; + } else if (hpt_minimum_revision(dev,2)) { + hwif->resetproc = &hpt3xx_reset; + hwif->busproc = &hpt3xx_tristate; + } else { + hwif->resetproc = &hpt3xx_reset; + hwif->busproc = &hpt3xx_tristate; + } + + if (!hwif->dma_base) { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + return; + } + + hwif->ultra_mask = 0x7f; + hwif->mwdma_mask = 0x07; + + if (!(hwif->udma_four)) + hwif->udma_four = ((ata66 & regmask) ? 0 : 1); + hwif->ide_dma_check = &hpt366_config_drive_xfer_rate; + + if (hpt_minimum_revision(dev,8)) { + hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq; + hwif->ide_dma_end = &hpt374_ide_dma_end; + } else if (hpt_minimum_revision(dev,5)) { + hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq; + hwif->ide_dma_end = &hpt374_ide_dma_end; + } else if (hpt_minimum_revision(dev,3)) { + hwif->dma_start = &hpt370_ide_dma_start; + hwif->ide_dma_end = &hpt370_ide_dma_end; + hwif->ide_dma_timeout = &hpt370_ide_dma_timeout; + hwif->ide_dma_lostirq = &hpt370_ide_dma_lostirq; + } else if (hpt_minimum_revision(dev,2)) + hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq; + else + hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq; + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase) +{ + u8 masterdma = 0, slavedma = 0; + u8 dma_new = 0, dma_old = 0; + u8 primary = hwif->channel ? 0x4b : 0x43; + u8 secondary = hwif->channel ? 0x4f : 0x47; + unsigned long flags; + + if (!dmabase) + return; + + if(pci_get_drvdata(hwif->pci_dev) == NULL) + { + printk(KERN_WARNING "hpt: no known IDE timings, disabling DMA.\n"); + return; + } + + dma_old = hwif->INB(dmabase+2); + + local_irq_save(flags); + + dma_new = dma_old; + pci_read_config_byte(hwif->pci_dev, primary, &masterdma); + pci_read_config_byte(hwif->pci_dev, secondary, &slavedma); + + if (masterdma & 0x30) dma_new |= 0x20; + if (slavedma & 0x30) dma_new |= 0x40; + if (dma_new != dma_old) + hwif->OUTB(dma_new, dmabase+2); + + local_irq_restore(flags); + + ide_setup_dma(hwif, dmabase, 8); +} + +static int __devinit init_setup_hpt374(struct pci_dev *dev, ide_pci_device_t *d) +{ + struct pci_dev *findev = NULL; + + if (PCI_FUNC(dev->devfn) & 1) + return -ENODEV; + + while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) { + if ((findev->vendor == dev->vendor) && + (findev->device == dev->device) && + ((findev->devfn - dev->devfn) == 1) && + (PCI_FUNC(findev->devfn) & 1)) { + if (findev->irq != dev->irq) { + /* FIXME: we need a core pci_set_interrupt() */ + findev->irq = dev->irq; + printk(KERN_WARNING "%s: pci-config space interrupt " + "fixed.\n", d->name); + } + return ide_setup_pci_devices(dev, findev, d); + } + } + return ide_setup_pci_device(dev, d); +} + +static int __devinit init_setup_hpt37x(struct pci_dev *dev, ide_pci_device_t *d) +{ + return ide_setup_pci_device(dev, d); +} + +static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) +{ + struct pci_dev *findev = NULL; + u8 pin1 = 0, pin2 = 0; + unsigned int class_rev; + char *chipset_names[] = {"HPT366", "HPT366", "HPT368", + "HPT370", "HPT370A", "HPT372", + "HPT372N" }; + + if (PCI_FUNC(dev->devfn) & 1) + return -ENODEV; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + + if(dev->device == PCI_DEVICE_ID_TTI_HPT372N) + class_rev = 6; + + if(class_rev <= 6) + d->name = chipset_names[class_rev]; + + switch(class_rev) { + case 6: + case 5: + case 4: + case 3: + goto init_single; + default: + break; + } + + d->channels = 1; + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1); + while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) { + if ((findev->vendor == dev->vendor) && + (findev->device == dev->device) && + ((findev->devfn - dev->devfn) == 1) && + (PCI_FUNC(findev->devfn) & 1)) { + pci_read_config_byte(findev, PCI_INTERRUPT_PIN, &pin2); + if ((pin1 != pin2) && (dev->irq == findev->irq)) { + d->bootable = ON_BOARD; + printk("%s: onboard version of chipset, " + "pin1=%d pin2=%d\n", d->name, + pin1, pin2); + } + return ide_setup_pci_devices(dev, findev, d); + } + } +init_single: + return ide_setup_pci_device(dev, d); +} + +static ide_pci_device_t hpt366_chipsets[] __devinitdata = { + { /* 0 */ + .name = "HPT366", + .init_setup = init_setup_hpt366, + .init_chipset = init_chipset_hpt366, + .init_hwif = init_hwif_hpt366, + .init_dma = init_dma_hpt366, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + .extra = 240 + },{ /* 1 */ + .name = "HPT372A", + .init_setup = init_setup_hpt37x, + .init_chipset = init_chipset_hpt366, + .init_hwif = init_hwif_hpt366, + .init_dma = init_dma_hpt366, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 2 */ + .name = "HPT302", + .init_setup = init_setup_hpt37x, + .init_chipset = init_chipset_hpt366, + .init_hwif = init_hwif_hpt366, + .init_dma = init_dma_hpt366, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 3 */ + .name = "HPT371", + .init_setup = init_setup_hpt37x, + .init_chipset = init_chipset_hpt366, + .init_hwif = init_hwif_hpt366, + .init_dma = init_dma_hpt366, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 4 */ + .name = "HPT374", + .init_setup = init_setup_hpt374, + .init_chipset = init_chipset_hpt366, + .init_hwif = init_hwif_hpt366, + .init_dma = init_dma_hpt366, + .channels = 2, /* 4 */ + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 5 */ + .name = "HPT372N", + .init_setup = init_setup_hpt37x, + .init_chipset = init_chipset_hpt366, + .init_hwif = init_hwif_hpt366, + .init_dma = init_dma_hpt366, + .channels = 2, /* 4 */ + .autodma = AUTODMA, + .bootable = OFF_BOARD, + } +}; + +/** + * hpt366_init_one - called when an HPT366 is found + * @dev: the hpt366 device + * @id: the matching pci id + * + * Called when the PCI registration layer (or the IDE initialization) + * finds a device matching our IDE device tables. + */ + +static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ide_pci_device_t *d = &hpt366_chipsets[id->driver_data]; + + return d->init_setup(dev, d); +} + +static struct pci_device_id hpt366_pci_tbl[] = { + { PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT302, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT374, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, + { PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372N, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, hpt366_pci_tbl); + +static struct pci_driver driver = { + .name = "HPT366_IDE", + .id_table = hpt366_pci_tbl, + .probe = hpt366_init_one, +}; + +static int hpt366_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(hpt366_ide_init); + +MODULE_AUTHOR("Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for Highpoint HPT366 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/it8172.c b/drivers/ide/pci/it8172.c new file mode 100644 index 0000000..631927c --- /dev/null +++ b/drivers/ide/pci/it8172.c @@ -0,0 +1,308 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * IT8172 IDE controller support + * + * Copyright 2000 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * stevel@mvista.com or source@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/delay.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/it8172/it8172_int.h> + +/* + * Prototypes + */ +static u8 it8172_ratemask (ide_drive_t *drive) +{ + return 1; +} + +static void it8172_tune_drive (ide_drive_t *drive, u8 pio) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + int is_slave = (&hwif->drives[1] == drive); + unsigned long flags; + u16 drive_enables; + u32 drive_timing; + + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + spin_lock_irqsave(&ide_lock, flags); + pci_read_config_word(dev, 0x40, &drive_enables); + pci_read_config_dword(dev, 0x44, &drive_timing); + + /* + * FIX! The DIOR/DIOW pulse width and recovery times in port 0x44 + * are being left at the default values of 8 PCI clocks (242 nsec + * for a 33 MHz clock). These can be safely shortened at higher + * PIO modes. The DIOR/DIOW pulse width and recovery times only + * apply to PIO modes, not to the DMA modes. + */ + + /* + * Enable port 0x44. The IT8172G spec is confused; it calls + * this register the "Slave IDE Timing Register", but in fact, + * it controls timing for both master and slave drives. + */ + drive_enables |= 0x4000; + + if (is_slave) { + drive_enables &= 0xc006; + if (pio > 1) + /* enable prefetch and IORDY sample-point */ + drive_enables |= 0x0060; + } else { + drive_enables &= 0xc060; + if (pio > 1) + /* enable prefetch and IORDY sample-point */ + drive_enables |= 0x0006; + } + + pci_write_config_word(dev, 0x40, drive_enables); + spin_unlock_irqrestore(&ide_lock, flags); +} + +static u8 it8172_dma_2_pio (u8 xfer_rate) +{ + switch(xfer_rate) { + case XFER_UDMA_5: + case XFER_UDMA_4: + case XFER_UDMA_3: + case XFER_UDMA_2: + case XFER_UDMA_1: + case XFER_UDMA_0: + case XFER_MW_DMA_2: + case XFER_PIO_4: + return 4; + case XFER_MW_DMA_1: + case XFER_PIO_3: + return 3; + case XFER_SW_DMA_2: + case XFER_PIO_2: + return 2; + case XFER_MW_DMA_0: + case XFER_SW_DMA_1: + case XFER_SW_DMA_0: + case XFER_PIO_1: + case XFER_PIO_0: + case XFER_PIO_SLOW: + default: + return 0; + } +} + +static int it8172_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 speed = ide_rate_filter(it8172_ratemask(drive), xferspeed); + int a_speed = 3 << (drive->dn * 4); + int u_flag = 1 << drive->dn; + int u_speed = 0; + u8 reg48, reg4a; + + pci_read_config_byte(dev, 0x48, ®48); + pci_read_config_byte(dev, 0x4a, ®4a); + + /* + * Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec + * at 33 MHz PCI clock) seems to cause BadCRC errors during DMA + * transfers on some drives, even though both numbers meet the minimum + * ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively. + * So the faster times are just commented out here. The good news is + * that the slower cycle time has very little affect on transfer + * performance. + */ + + switch(speed) { + case XFER_UDMA_4: + case XFER_UDMA_2: //u_speed = 2 << (drive->dn * 4); break; + case XFER_UDMA_5: + case XFER_UDMA_3: + case XFER_UDMA_1: //u_speed = 1 << (drive->dn * 4); break; + case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break; + case XFER_MW_DMA_2: + case XFER_MW_DMA_1: + case XFER_MW_DMA_0: + case XFER_SW_DMA_2: break; + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_0: break; + default: return -1; + } + + if (speed >= XFER_UDMA_0) { + pci_write_config_byte(dev, 0x48, reg48 | u_flag); + reg4a &= ~a_speed; + pci_write_config_byte(dev, 0x4a, reg4a | u_speed); + } else { + pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); + pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed); + } + + it8172_tune_drive(drive, it8172_dma_2_pio(speed)); + return (ide_config_drive_speed(drive, speed)); +} + +static int it8172_config_chipset_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, it8172_ratemask(drive)); + + if (!(speed)) { + u8 tspeed = ide_get_best_pio_mode(drive, 255, 4, NULL); + speed = it8172_dma_2_pio(XFER_PIO_0 + tspeed); + } + + (void) it8172_tune_chipset(drive, speed); + return ide_dma_enable(drive); +} + +static int it8172_config_drive_xfer_rate (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + drive->init_speed = 0; + + if (id && (id->capability & 1) && drive->autodma) { + + if (ide_use_dma(drive)) { + if (it8172_config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + it8172_tune_drive(drive, 5); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +static unsigned int __init init_chipset_it8172 (struct pci_dev *dev, const char *name) +{ + unsigned char progif; + + /* + * Place both IDE interfaces into PCI "native" mode + */ + pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); + pci_write_config_byte(dev, PCI_CLASS_PROG, progif | 0x05); + + return IT8172_IDE_IRQ; +} + + +static void __init init_hwif_it8172 (ide_hwif_t *hwif) +{ + struct pci_dev* dev = hwif->pci_dev; + unsigned long cmdBase, ctrlBase; + + hwif->autodma = 0; + hwif->tuneproc = &it8172_tune_drive; + hwif->speedproc = &it8172_tune_chipset; + + cmdBase = dev->resource[0].start; + ctrlBase = dev->resource[1].start; + + ide_init_hwif_ports(&hwif->hw, cmdBase, ctrlBase | 2, NULL); + memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports)); + hwif->noprobe = 0; + + if (!hwif->dma_base) { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + return; + } + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x07; + hwif->mwdma_mask = 0x06; + hwif->swdma_mask = 0x04; + + hwif->ide_dma_check = &it8172_config_drive_xfer_rate; + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +static ide_pci_device_t it8172_chipsets[] __devinitdata = { + { /* 0 */ + .name = "IT8172G", + .init_chipset = init_chipset_it8172, + .init_hwif = init_hwif_it8172, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x00,0x00,0x00}, {0x40,0x00,0x01}}, + .bootable = ON_BOARD, + } +}; + +static int __devinit it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + if ((!(PCI_FUNC(dev->devfn) & 1) || + (!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)))) + return -ENODEV; /* IT8172 is more than an IDE controller */ + return ide_setup_pci_device(dev, &it8172_chipsets[id->driver_data]); +} + +static struct pci_device_id it8172_pci_tbl[] = { + { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, it8172_pci_tbl); + +static struct pci_driver driver = { + .name = "IT8172_IDE", + .id_table = it8172_pci_tbl, + .probe = it8172_init_one, +}; + +static int it8172_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(it8172_ide_init); + +MODULE_AUTHOR("SteveL@mvista.com"); +MODULE_DESCRIPTION("PCI driver module for ITE 8172 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c new file mode 100644 index 0000000..205a32f --- /dev/null +++ b/drivers/ide/pci/ns87415.c @@ -0,0 +1,315 @@ +/* + * linux/drivers/ide/pci/ns87415.c Version 2.00 Sep. 10, 2002 + * + * Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com> + * Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be> + * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2004 Grant Grundler <grundler at parisc-linux.org> + * + * Inspired by an earlier effort from David S. Miller <davem@redhat.com> + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/ide.h> +#include <linux/init.h> + +#include <asm/io.h> + +#ifdef CONFIG_SUPERIO +/* SUPERIO 87560 is a PoS chip that NatSem denies exists. + * Unfortunately, it's built-in on all Astro-based PA-RISC workstations + * which use the integrated NS87514 cell for CD-ROM support. + * i.e we have to support for CD-ROM installs. + * See drivers/parisc/superio.c for more gory details. + */ +#include <asm/superio.h> + +static unsigned long superio_ide_status[2]; +static unsigned long superio_ide_select[2]; +static unsigned long superio_ide_dma_status[2]; + +#define SUPERIO_IDE_MAX_RETRIES 25 + +/* Because of a defect in Super I/O, all reads of the PCI DMA status + * registers, IDE status register and the IDE select register need to be + * retried + */ +static u8 superio_ide_inb (unsigned long port) +{ + if (port == superio_ide_status[0] || + port == superio_ide_status[1] || + port == superio_ide_select[0] || + port == superio_ide_select[1] || + port == superio_ide_dma_status[0] || + port == superio_ide_dma_status[1]) { + u8 tmp; + int retries = SUPERIO_IDE_MAX_RETRIES; + + /* printk(" [ reading port 0x%x with retry ] ", port); */ + + do { + tmp = inb(port); + if (tmp == 0) + udelay(50); + } while (tmp == 0 && retries-- > 0); + + return tmp; + } + + return inb(port); +} + +static void __devinit superio_ide_init_iops (struct hwif_s *hwif) +{ + u32 base, dmabase; + u8 tmp; + struct pci_dev *pdev = hwif->pci_dev; + u8 port = hwif->channel; + + base = pci_resource_start(pdev, port * 2) & ~3; + dmabase = pci_resource_start(pdev, 4) & ~3; + + superio_ide_status[port] = base + IDE_STATUS_OFFSET; + superio_ide_select[port] = base + IDE_SELECT_OFFSET; + superio_ide_dma_status[port] = dmabase + (!port ? 2 : 0xa); + + /* Clear error/interrupt, enable dma */ + tmp = superio_ide_inb(superio_ide_dma_status[port]); + outb(tmp | 0x66, superio_ide_dma_status[port]); + + /* We need to override inb to workaround a SuperIO errata */ + hwif->INB = superio_ide_inb; +} + +static void __devinit init_iops_ns87415(ide_hwif_t *hwif) +{ + if (PCI_SLOT(hwif->pci_dev->devfn) == 0xE) { + /* Built-in - assume it's under superio. */ + superio_ide_init_iops(hwif); + } +} +#endif + +static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 }; + +/* + * This routine either enables/disables (according to drive->present) + * the IRQ associated with the port (HWIF(drive)), + * and selects either PIO or DMA handshaking for the next I/O operation. + */ +static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data; + struct pci_dev *dev = hwif->pci_dev; + unsigned long flags; + + local_irq_save(flags); + new = *old; + + /* Adjust IRQ enable bit */ + bit = 1 << (8 + hwif->channel); + new = drive->present ? (new & ~bit) : (new | bit); + + /* Select PIO or DMA, DMA may only be selected for one drive/channel. */ + bit = 1 << (20 + drive->select.b.unit + (hwif->channel << 1)); + other = 1 << (20 + (1 - drive->select.b.unit) + (hwif->channel << 1)); + new = use_dma ? ((new & ~other) | bit) : (new & ~bit); + + if (new != *old) { + unsigned char stat; + + /* + * Don't change DMA engine settings while Write Buffers + * are busy. + */ + (void) pci_read_config_byte(dev, 0x43, &stat); + while (stat & 0x03) { + udelay(1); + (void) pci_read_config_byte(dev, 0x43, &stat); + } + + *old = new; + (void) pci_write_config_dword(dev, 0x40, new); + + /* + * And let things settle... + */ + udelay(10); + } + + local_irq_restore(flags); +} + +static void ns87415_selectproc (ide_drive_t *drive) +{ + ns87415_prepare_drive (drive, drive->using_dma); +} + +static int ns87415_ide_dma_end (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 dma_stat = 0, dma_cmd = 0; + + drive->waiting_for_dma = 0; + dma_stat = hwif->INB(hwif->dma_status); + /* get dma command mode */ + dma_cmd = hwif->INB(hwif->dma_command); + /* stop DMA */ + hwif->OUTB(dma_cmd & ~1, hwif->dma_command); + /* from ERRATA: clear the INTR & ERROR bits */ + dma_cmd = hwif->INB(hwif->dma_command); + hwif->OUTB(dma_cmd|6, hwif->dma_command); + /* and free any DMA resources */ + ide_destroy_dmatable(drive); + /* verify good DMA status */ + return (dma_stat & 7) != 4; +} + +static int ns87415_ide_dma_setup(ide_drive_t *drive) +{ + /* select DMA xfer */ + ns87415_prepare_drive(drive, 1); + if (!ide_dma_setup(drive)) + return 0; + /* DMA failed: select PIO xfer */ + ns87415_prepare_drive(drive, 0); + return 1; +} + +static int ns87415_ide_dma_check (ide_drive_t *drive) +{ + if (drive->media != ide_disk) + return HWIF(drive)->ide_dma_off_quietly(drive); + return __ide_dma_check(drive); +} + +static void __init init_hwif_ns87415 (ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + unsigned int ctrl, using_inta; + u8 progif; +#ifdef __sparc_v9__ + int timeout; + u8 stat; +#endif + + hwif->autodma = 0; + hwif->selectproc = &ns87415_selectproc; + + /* + * We cannot probe for IRQ: both ports share common IRQ on INTA. + * Also, leave IRQ masked during drive probing, to prevent infinite + * interrupts from a potentially floating INTA.. + * + * IRQs get unmasked in selectproc when drive is first used. + */ + (void) pci_read_config_dword(dev, 0x40, &ctrl); + (void) pci_read_config_byte(dev, 0x09, &progif); + /* is irq in "native" mode? */ + using_inta = progif & (1 << (hwif->channel << 1)); + if (!using_inta) + using_inta = ctrl & (1 << (4 + hwif->channel)); + if (hwif->mate) { + hwif->select_data = hwif->mate->select_data; + } else { + hwif->select_data = (unsigned long) + &ns87415_control[ns87415_count++]; + ctrl |= (1 << 8) | (1 << 9); /* mask both IRQs */ + if (using_inta) + ctrl &= ~(1 << 6); /* unmask INTA */ + *((unsigned int *)hwif->select_data) = ctrl; + (void) pci_write_config_dword(dev, 0x40, ctrl); + + /* + * Set prefetch size to 512 bytes for both ports, + * but don't turn on/off prefetching here. + */ + pci_write_config_byte(dev, 0x55, 0xee); + +#ifdef __sparc_v9__ + /* + * XXX: Reset the device, if we don't it will not respond + * to SELECT_DRIVE() properly during first probe_hwif(). + */ + timeout = 10000; + hwif->OUTB(12, hwif->io_ports[IDE_CONTROL_OFFSET]); + udelay(10); + hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); + do { + udelay(50); + stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]); + if (stat == 0xff) + break; + } while ((stat & BUSY_STAT) && --timeout); +#endif + } + + if (!using_inta) + hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET]); + else if (!hwif->irq && hwif->mate && hwif->mate->irq) + hwif->irq = hwif->mate->irq; /* share IRQ with mate */ + + if (!hwif->dma_base) + return; + + hwif->OUTB(0x60, hwif->dma_status); + hwif->dma_setup = &ns87415_ide_dma_setup; + hwif->ide_dma_check = &ns87415_ide_dma_check; + hwif->ide_dma_end = &ns87415_ide_dma_end; + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +static ide_pci_device_t ns87415_chipset __devinitdata = { + .name = "NS87415", +#ifdef CONFIG_SUPERIO + .init_iops = init_iops_ns87415, +#endif + .init_hwif = init_hwif_ns87415, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, +}; + +static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &ns87415_chipset); +} + +static struct pci_device_id ns87415_pci_tbl[] = { + { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl); + +static struct pci_driver driver = { + .name = "NS87415_IDE", + .id_table = ns87415_pci_tbl, + .probe = ns87415_init_one, +}; + +static int ns87415_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(ns87415_ide_init); + +MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for NS87415 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c new file mode 100644 index 0000000..cf4fd91 --- /dev/null +++ b/drivers/ide/pci/opti621.c @@ -0,0 +1,394 @@ +/* + * linux/drivers/ide/pci/opti621.c Version 0.7 Sept 10, 2002 + * + * Copyright (C) 1996-1998 Linus Torvalds & authors (see below) + */ + +/* + * Authors: + * Jaromir Koutek <miri@punknet.cz>, + * Jan Harkes <jaharkes@cwi.nl>, + * Mark Lord <mlord@pobox.com> + * Some parts of code are from ali14xx.c and from rz1000.c. + * + * OPTi is trademark of OPTi, Octek is trademark of Octek. + * + * I used docs from OPTi databook, from ftp.opti.com, file 9123-0002.ps + * and disassembled/traced setupvic.exe (DOS program). + * It increases kernel code about 2 kB. + * I don't have this card no more, but I hope I can get some in case + * of needed development. + * My card is Octek PIDE 1.01 (on card) or OPTiViC (program). + * It has a place for a secondary connector in circuit, but nothing + * is there. Also BIOS says no address for + * secondary controller (see bellow in ide_init_opti621). + * I've only tested this on my system, which only has one disk. + * It's Western Digital WDAC2850, with PIO mode 3. The PCI bus + * is at 20 MHz (I have DX2/80, I tried PCI at 40, but I got random + * lockups). I tried the OCTEK double speed CD-ROM and + * it does not work! But I can't boot DOS also, so it's probably + * hardware fault. I have connected Conner 80MB, the Seagate 850MB (no + * problems) and Seagate 1GB (as slave, WD as master). My experiences + * with the third, 1GB drive: I got 3MB/s (hdparm), but sometimes + * it slows to about 100kB/s! I don't know why and I have + * not this drive now, so I can't try it again. + * I write this driver because I lost the paper ("manual") with + * settings of jumpers on the card and I have to boot Linux with + * Loadlin except LILO, cause I have to run the setupvic.exe program + * already or I get disk errors (my test: rpm -Vf + * /usr/X11R6/bin/XF86_SVGA - or any big file). + * Some numbers from hdparm -t /dev/hda: + * Timing buffer-cache reads: 32 MB in 3.02 seconds =10.60 MB/sec + * Timing buffered disk reads: 16 MB in 5.52 seconds = 2.90 MB/sec + * I have 4 Megs/s before, but I don't know why (maybe changes + * in hdparm test). + * After release of 0.1, I got some successful reports, so it might work. + * + * The main problem with OPTi is that some timings for master + * and slave must be the same. For example, if you have master + * PIO 3 and slave PIO 0, driver have to set some timings of + * master for PIO 0. Second problem is that opti621_tune_drive + * got only one drive to set, but have to set both drives. + * This is solved in compute_pios. If you don't set + * the second drive, compute_pios use ide_get_best_pio_mode + * for autoselect mode (you can change it to PIO 0, if you want). + * If you then set the second drive to another PIO, the old value + * (automatically selected) will be overrided by yours. + * There is a 25/33MHz switch in configuration + * register, but driver is written for use at any frequency which get + * (use idebus=xx to select PCI bus speed). + * Use ide0=autotune for automatical tune of the PIO modes. + * If you get strange results, do not use this and set PIO manually + * by hdparm. + * + * Version 0.1, Nov 8, 1996 + * by Jaromir Koutek, for 2.1.8. + * Initial version of driver. + * + * Version 0.2 + * Number 0.2 skipped. + * + * Version 0.3, Nov 29, 1997 + * by Mark Lord (probably), for 2.1.68 + * Updates for use with new IDE block driver. + * + * Version 0.4, Dec 14, 1997 + * by Jan Harkes + * Fixed some errors and cleaned the code. + * + * Version 0.5, Jan 2, 1998 + * by Jaromir Koutek + * Updates for use with (again) new IDE block driver. + * Update of documentation. + * + * Version 0.6, Jan 2, 1999 + * by Jaromir Koutek + * Reversed to version 0.3 of the driver, because + * 0.5 doesn't work. + */ + +#undef REALLY_SLOW_IO /* most systems can safely undef this */ +#define OPTI621_DEBUG /* define for debug messages */ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/pci.h> +#include <linux/hdreg.h> +#include <linux/ide.h> + +#include <asm/io.h> + +#define OPTI621_MAX_PIO 3 +/* In fact, I do not have any PIO 4 drive + * (address: 25 ns, data: 70 ns, recovery: 35 ns), + * but OPTi 82C621 is programmable and it can do (minimal values): + * on 40MHz PCI bus (pulse 25 ns): + * address: 25 ns, data: 25 ns, recovery: 50 ns; + * on 20MHz PCI bus (pulse 50 ns): + * address: 50 ns, data: 50 ns, recovery: 100 ns. + */ + +/* #define READ_PREFETCH 0 */ +/* Uncomment for disable read prefetch. + * There is some readprefetch capatibility in hdparm, + * but when I type hdparm -P 1 /dev/hda, I got errors + * and till reset drive is inaccessible. + * This (hw) read prefetch is safe on my drive. + */ + +#ifndef READ_PREFETCH +#define READ_PREFETCH 0x40 /* read prefetch is enabled */ +#endif /* else read prefetch is disabled */ + +#define READ_REG 0 /* index of Read cycle timing register */ +#define WRITE_REG 1 /* index of Write cycle timing register */ +#define CNTRL_REG 3 /* index of Control register */ +#define STRAP_REG 5 /* index of Strap register */ +#define MISC_REG 6 /* index of Miscellaneous register */ + +static int reg_base; + +#define PIO_NOT_EXIST 254 +#define PIO_DONT_KNOW 255 + +/* there are stored pio numbers from other calls of opti621_tune_drive */ +static void compute_pios(ide_drive_t *drive, u8 pio) +/* Store values into drive->drive_data + * second_contr - 0 for primary controller, 1 for secondary + * slave_drive - 0 -> pio is for master, 1 -> pio is for slave + * pio - PIO mode for selected drive (for other we don't know) + */ +{ + int d; + ide_hwif_t *hwif = HWIF(drive); + + drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO, NULL); + for (d = 0; d < 2; ++d) { + drive = &hwif->drives[d]; + if (drive->present) { + if (drive->drive_data == PIO_DONT_KNOW) + drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO, NULL); +#ifdef OPTI621_DEBUG + printk("%s: Selected PIO mode %d\n", + drive->name, drive->drive_data); +#endif + } else { + drive->drive_data = PIO_NOT_EXIST; + } + } +} + +static int cmpt_clk(int time, int bus_speed) +/* Returns (rounded up) time in clocks for time in ns, + * with bus_speed in MHz. + * Example: bus_speed = 40 MHz, time = 80 ns + * 1000/40 = 25 ns (clk value), + * 80/25 = 3.2, rounded up to 4 (I hope ;-)). + * Use idebus=xx to select right frequency. + */ +{ + return ((time*bus_speed+999)/1000); +} + +static void write_reg(ide_hwif_t *hwif, u8 value, int reg) +/* Write value to register reg, base of register + * is at reg_base (0x1f0 primary, 0x170 secondary, + * if not changed by PCI configuration). + * This is from setupvic.exe program. + */ +{ + hwif->INW(reg_base+1); + hwif->INW(reg_base+1); + hwif->OUTB(3, reg_base+2); + hwif->OUTB(value, reg_base+reg); + hwif->OUTB(0x83, reg_base+2); +} + +static u8 read_reg(ide_hwif_t *hwif, int reg) +/* Read value from register reg, base of register + * is at reg_base (0x1f0 primary, 0x170 secondary, + * if not changed by PCI configuration). + * This is from setupvic.exe program. + */ +{ + u8 ret = 0; + + hwif->INW(reg_base+1); + hwif->INW(reg_base+1); + hwif->OUTB(3, reg_base+2); + ret = hwif->INB(reg_base+reg); + hwif->OUTB(0x83, reg_base+2); + return ret; +} + +typedef struct pio_clocks_s { + int address_time; /* Address setup (clocks) */ + int data_time; /* Active/data pulse (clocks) */ + int recovery_time; /* Recovery time (clocks) */ +} pio_clocks_t; + +static void compute_clocks(int pio, pio_clocks_t *clks) +{ + if (pio != PIO_NOT_EXIST) { + int adr_setup, data_pls; + int bus_speed = system_bus_clock(); + + adr_setup = ide_pio_timings[pio].setup_time; + data_pls = ide_pio_timings[pio].active_time; + clks->address_time = cmpt_clk(adr_setup, bus_speed); + clks->data_time = cmpt_clk(data_pls, bus_speed); + clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time + - adr_setup-data_pls, bus_speed); + if (clks->address_time<1) clks->address_time = 1; + if (clks->address_time>4) clks->address_time = 4; + if (clks->data_time<1) clks->data_time = 1; + if (clks->data_time>16) clks->data_time = 16; + if (clks->recovery_time<2) clks->recovery_time = 2; + if (clks->recovery_time>17) clks->recovery_time = 17; + } else { + clks->address_time = 1; + clks->data_time = 1; + clks->recovery_time = 2; + /* minimal values */ + } + +} + +/* Main tune procedure, called from tuneproc. */ +static void opti621_tune_drive (ide_drive_t *drive, u8 pio) +{ + /* primary and secondary drives share some registers, + * so we have to program both drives + */ + unsigned long flags; + u8 pio1 = 0, pio2 = 0; + pio_clocks_t first, second; + int ax, drdy; + u8 cycle1, cycle2, misc; + ide_hwif_t *hwif = HWIF(drive); + + /* sets drive->drive_data for both drives */ + compute_pios(drive, pio); + pio1 = hwif->drives[0].drive_data; + pio2 = hwif->drives[1].drive_data; + + compute_clocks(pio1, &first); + compute_clocks(pio2, &second); + + /* ax = max(a1,a2) */ + ax = (first.address_time < second.address_time) ? second.address_time : first.address_time; + + drdy = 2; /* DRDY is default 2 (by OPTi Databook) */ + + cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2); + cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2); + misc = READ_PREFETCH | ((ax-1)<<4) | ((drdy-2)<<1); + +#ifdef OPTI621_DEBUG + printk("%s: master: address: %d, data: %d, " + "recovery: %d, drdy: %d [clk]\n", + hwif->name, ax, first.data_time, + first.recovery_time, drdy); + printk("%s: slave: address: %d, data: %d, " + "recovery: %d, drdy: %d [clk]\n", + hwif->name, ax, second.data_time, + second.recovery_time, drdy); +#endif + + spin_lock_irqsave(&ide_lock, flags); + + reg_base = hwif->io_ports[IDE_DATA_OFFSET]; + + /* allow Register-B */ + hwif->OUTB(0xc0, reg_base+CNTRL_REG); + /* hmm, setupvic.exe does this ;-) */ + hwif->OUTB(0xff, reg_base+5); + /* if reads 0xff, adapter not exist? */ + (void) hwif->INB(reg_base+CNTRL_REG); + /* if reads 0xc0, no interface exist? */ + read_reg(hwif, CNTRL_REG); + /* read version, probably 0 */ + read_reg(hwif, STRAP_REG); + + /* program primary drive */ + /* select Index-0 for Register-A */ + write_reg(hwif, 0, MISC_REG); + /* set read cycle timings */ + write_reg(hwif, cycle1, READ_REG); + /* set write cycle timings */ + write_reg(hwif, cycle1, WRITE_REG); + + /* program secondary drive */ + /* select Index-1 for Register-B */ + write_reg(hwif, 1, MISC_REG); + /* set read cycle timings */ + write_reg(hwif, cycle2, READ_REG); + /* set write cycle timings */ + write_reg(hwif, cycle2, WRITE_REG); + + /* use Register-A for drive 0 */ + /* use Register-B for drive 1 */ + write_reg(hwif, 0x85, CNTRL_REG); + + /* set address setup, DRDY timings, */ + /* and read prefetch for both drives */ + write_reg(hwif, misc, MISC_REG); + + spin_unlock_irqrestore(&ide_lock, flags); +} + +/* + * init_hwif_opti621() is called once for each hwif found at boot. + */ +static void __init init_hwif_opti621 (ide_hwif_t *hwif) +{ + hwif->autodma = 0; + hwif->drives[0].drive_data = PIO_DONT_KNOW; + hwif->drives[1].drive_data = PIO_DONT_KNOW; + hwif->tuneproc = &opti621_tune_drive; + + if (!(hwif->dma_base)) + return; + + hwif->atapi_dma = 1; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +static ide_pci_device_t opti621_chipsets[] __devinitdata = { + { /* 0 */ + .name = "OPTI621", + .init_hwif = init_hwif_opti621, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x45,0x80,0x00}, {0x40,0x08,0x00}}, + .bootable = ON_BOARD, + },{ /* 1 */ + .name = "OPTI621X", + .init_hwif = init_hwif_opti621, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x45,0x80,0x00}, {0x40,0x08,0x00}}, + .bootable = ON_BOARD, + } +}; + +static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &opti621_chipsets[id->driver_data]); +} + +static struct pci_device_id opti621_pci_tbl[] = { + { PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C621, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, opti621_pci_tbl); + +static struct pci_driver driver = { + .name = "Opti621_IDE", + .id_table = opti621_pci_tbl, + .probe = opti621_init_one, +}; + +static int opti621_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(opti621_ide_init); + +MODULE_AUTHOR("Jaromir Koutek, Jan Harkes, Mark Lord"); +MODULE_DESCRIPTION("PCI driver module for Opti621 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c new file mode 100644 index 0000000..211641a --- /dev/null +++ b/drivers/ide/pci/pdc202xx_new.c @@ -0,0 +1,508 @@ +/* + * Promise TX2/TX4/TX2000/133 IDE driver + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Split from: + * linux/drivers/ide/pdc202xx.c Version 0.35 Mar. 30, 2002 + * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> + * Portions Copyright (C) 1999 Promise Technology, Inc. + * Author: Frank Tiernan (frankt@promise.com) + * Released under terms of General Public License + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ide.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#ifdef CONFIG_PPC_PMAC +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#endif + +#define PDC202_DEBUG_CABLE 0 + +const static char *pdc_quirk_drives[] = { + "QUANTUM FIREBALLlct08 08", + "QUANTUM FIREBALLP KA6.4", + "QUANTUM FIREBALLP KA9.1", + "QUANTUM FIREBALLP LM20.4", + "QUANTUM FIREBALLP KX13.6", + "QUANTUM FIREBALLP KX20.5", + "QUANTUM FIREBALLP KX27.3", + "QUANTUM FIREBALLP LM20.5", + NULL +}; + +#define set_2regs(a, b) \ + do { \ + hwif->OUTB((a + adj), indexreg); \ + hwif->OUTB(b, datareg); \ + } while(0) + +#define set_ultra(a, b, c) \ + do { \ + set_2regs(0x10,(a)); \ + set_2regs(0x11,(b)); \ + set_2regs(0x12,(c)); \ + } while(0) + +#define set_ata2(a, b) \ + do { \ + set_2regs(0x0e,(a)); \ + set_2regs(0x0f,(b)); \ + } while(0) + +#define set_pio(a, b, c) \ + do { \ + set_2regs(0x0c,(a)); \ + set_2regs(0x0d,(b)); \ + set_2regs(0x13,(c)); \ + } while(0) + +static u8 pdcnew_ratemask (ide_drive_t *drive) +{ + u8 mode; + + switch(HWIF(drive)->pci_dev->device) { + case PCI_DEVICE_ID_PROMISE_20277: + case PCI_DEVICE_ID_PROMISE_20276: + case PCI_DEVICE_ID_PROMISE_20275: + case PCI_DEVICE_ID_PROMISE_20271: + case PCI_DEVICE_ID_PROMISE_20269: + mode = 4; + break; + case PCI_DEVICE_ID_PROMISE_20270: + case PCI_DEVICE_ID_PROMISE_20268: + mode = 3; + break; + default: + return 0; + } + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + return mode; +} + +static int check_in_drive_lists (ide_drive_t *drive, const char **list) +{ + struct hd_driveid *id = drive->id; + + if (pdc_quirk_drives == list) { + while (*list) { + if (strstr(id->model, *list++)) { + return 2; + } + } + } else { + while (*list) { + if (!strcmp(*list++,id->model)) { + return 1; + } + } + } + return 0; +} + +static int pdcnew_new_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned long indexreg = hwif->dma_vendor1; + unsigned long datareg = hwif->dma_vendor3; + u8 thold = 0x10; + u8 adj = (drive->dn%2) ? 0x08 : 0x00; + u8 speed = ide_rate_filter(pdcnew_ratemask(drive), xferspeed); + + if (speed == XFER_UDMA_2) { + hwif->OUTB((thold + adj), indexreg); + hwif->OUTB((hwif->INB(datareg) & 0x7f), datareg); + } + + switch (speed) { + case XFER_UDMA_7: + speed = XFER_UDMA_6; + case XFER_UDMA_6: set_ultra(0x1a, 0x01, 0xcb); break; + case XFER_UDMA_5: set_ultra(0x1a, 0x02, 0xcb); break; + case XFER_UDMA_4: set_ultra(0x1a, 0x03, 0xcd); break; + case XFER_UDMA_3: set_ultra(0x1a, 0x05, 0xcd); break; + case XFER_UDMA_2: set_ultra(0x2a, 0x07, 0xcd); break; + case XFER_UDMA_1: set_ultra(0x3a, 0x0a, 0xd0); break; + case XFER_UDMA_0: set_ultra(0x4a, 0x0f, 0xd5); break; + case XFER_MW_DMA_2: set_ata2(0x69, 0x25); break; + case XFER_MW_DMA_1: set_ata2(0x6b, 0x27); break; + case XFER_MW_DMA_0: set_ata2(0xdf, 0x5f); break; + case XFER_PIO_4: set_pio(0x23, 0x09, 0x25); break; + case XFER_PIO_3: set_pio(0x27, 0x0d, 0x35); break; + case XFER_PIO_2: set_pio(0x23, 0x26, 0x64); break; + case XFER_PIO_1: set_pio(0x46, 0x29, 0xa4); break; + case XFER_PIO_0: set_pio(0xfb, 0x2b, 0xac); break; + default: + ; + } + + return (ide_config_drive_speed(drive, speed)); +} + +/* 0 1 2 3 4 5 6 7 8 + * 960, 480, 390, 300, 240, 180, 120, 90, 60 + * 180, 150, 120, 90, 60 + * DMA_Speed + * 180, 120, 90, 90, 90, 60, 30 + * 11, 5, 4, 3, 2, 1, 0 + */ +static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio) +{ + u8 speed; + + if (pio == 5) pio = 4; + speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, pio, NULL); + + (void)pdcnew_new_tune_chipset(drive, speed); +} + +static u8 pdcnew_new_cable_detect (ide_hwif_t *hwif) +{ + hwif->OUTB(0x0b, hwif->dma_vendor1); + return ((u8)((hwif->INB(hwif->dma_vendor3) & 0x04))); +} +static int config_chipset_for_dma (ide_drive_t *drive) +{ + struct hd_driveid *id = drive->id; + ide_hwif_t *hwif = HWIF(drive); + u8 speed = -1; + u8 cable; + + u8 ultra_66 = ((id->dma_ultra & 0x0010) || + (id->dma_ultra & 0x0008)) ? 1 : 0; + + cable = pdcnew_new_cable_detect(hwif); + + if (ultra_66 && cable) { + printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary"); + printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name); + } + + if (drive->media != ide_disk) + return 0; + if (id->capability & 4) { /* IORDY_EN & PREFETCH_EN */ + hwif->OUTB((0x13 + ((drive->dn%2) ? 0x08 : 0x00)), hwif->dma_vendor1); + hwif->OUTB((hwif->INB(hwif->dma_vendor3)|0x03), hwif->dma_vendor3); + } + + speed = ide_dma_speed(drive, pdcnew_ratemask(drive)); + + if (!(speed)) { + hwif->tuneproc(drive, 5); + return 0; + } + + (void) hwif->speedproc(drive, speed); + return ide_dma_enable(drive); +} + +static int pdcnew_config_drive_xfer_rate (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + drive->init_speed = 0; + + if (id && (id->capability & 1) && drive->autodma) { + + if (ide_use_dma(drive)) { + if (config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + hwif->tuneproc(drive, 5); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +static int pdcnew_quirkproc (ide_drive_t *drive) +{ + return ((int) check_in_drive_lists(drive, pdc_quirk_drives)); +} + +static int pdcnew_ide_dma_lostirq(ide_drive_t *drive) +{ + if (HWIF(drive)->resetproc != NULL) + HWIF(drive)->resetproc(drive); + return __ide_dma_lostirq(drive); +} + +static int pdcnew_ide_dma_timeout(ide_drive_t *drive) +{ + if (HWIF(drive)->resetproc != NULL) + HWIF(drive)->resetproc(drive); + return __ide_dma_timeout(drive); +} + +static void pdcnew_new_reset (ide_drive_t *drive) +{ + /* + * Deleted this because it is redundant from the caller. + */ + printk(KERN_WARNING "PDC202XX: %s channel reset.\n", + HWIF(drive)->channel ? "Secondary" : "Primary"); +} + +#ifdef CONFIG_PPC_PMAC +static void __devinit apple_kiwi_init(struct pci_dev *pdev) +{ + struct device_node *np = pci_device_to_OF_node(pdev); + unsigned int class_rev = 0; + void __iomem *mmio; + u8 conf; + + if (np == NULL || !device_is_compatible(np, "kiwi-root")) + return; + + pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + + if (class_rev >= 0x03) { + /* Setup chip magic config stuff (from darwin) */ + pci_read_config_byte(pdev, 0x40, &conf); + pci_write_config_byte(pdev, 0x40, conf | 0x01); + } + mmio = ioremap(pci_resource_start(pdev, 5), + pci_resource_len(pdev, 5)); + + /* Setup some PLL stuffs */ + switch (pdev->device) { + case PCI_DEVICE_ID_PROMISE_20270: + writew(0x0d2b, mmio + 0x1202); + mdelay(30); + break; + case PCI_DEVICE_ID_PROMISE_20271: + writew(0x0826, mmio + 0x1202); + mdelay(30); + break; + } + + iounmap(mmio); +} +#endif /* CONFIG_PPC_PMAC */ + +static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const char *name) +{ + if (dev->resource[PCI_ROM_RESOURCE].start) { + pci_write_config_dword(dev, PCI_ROM_ADDRESS, + dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); + printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", + name, dev->resource[PCI_ROM_RESOURCE].start); + } + +#ifdef CONFIG_PPC_PMAC + apple_kiwi_init(dev); +#endif + + return dev->irq; +} + +static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) +{ + hwif->autodma = 0; + + hwif->tuneproc = &pdcnew_tune_drive; + hwif->quirkproc = &pdcnew_quirkproc; + hwif->speedproc = &pdcnew_new_tune_chipset; + hwif->resetproc = &pdcnew_new_reset; + + hwif->drives[0].autotune = hwif->drives[1].autotune = 1; + + hwif->ultra_mask = 0x7f; + hwif->mwdma_mask = 0x07; + + hwif->ide_dma_check = &pdcnew_config_drive_xfer_rate; + hwif->ide_dma_lostirq = &pdcnew_ide_dma_lostirq; + hwif->ide_dma_timeout = &pdcnew_ide_dma_timeout; + if (!(hwif->udma_four)) + hwif->udma_four = (pdcnew_new_cable_detect(hwif)) ? 0 : 1; + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; +#if PDC202_DEBUG_CABLE + printk(KERN_DEBUG "%s: %s-pin cable\n", + hwif->name, hwif->udma_four ? "80" : "40"); +#endif /* PDC202_DEBUG_CABLE */ +} + +static int __devinit init_setup_pdcnew(struct pci_dev *dev, ide_pci_device_t *d) +{ + return ide_setup_pci_device(dev, d); +} + +static int __devinit init_setup_pdc20270(struct pci_dev *dev, + ide_pci_device_t *d) +{ + struct pci_dev *findev = NULL; + + if ((dev->bus->self && + dev->bus->self->vendor == PCI_VENDOR_ID_DEC) && + (dev->bus->self->device == PCI_DEVICE_ID_DEC_21150)) { + if (PCI_SLOT(dev->devfn) & 2) + return -ENODEV; + d->extra = 0; + while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) { + if ((findev->vendor == dev->vendor) && + (findev->device == dev->device) && + (PCI_SLOT(findev->devfn) & 2)) { + if (findev->irq != dev->irq) { + findev->irq = dev->irq; + } + return ide_setup_pci_devices(dev, findev, d); + } + } + } + return ide_setup_pci_device(dev, d); +} + +static int __devinit init_setup_pdc20276(struct pci_dev *dev, + ide_pci_device_t *d) +{ + if ((dev->bus->self) && + (dev->bus->self->vendor == PCI_VENDOR_ID_INTEL) && + ((dev->bus->self->device == PCI_DEVICE_ID_INTEL_I960) || + (dev->bus->self->device == PCI_DEVICE_ID_INTEL_I960RM))) { + printk(KERN_INFO "ide: Skipping Promise PDC20276 " + "attached to I2O RAID controller.\n"); + return -ENODEV; + } + return ide_setup_pci_device(dev, d); +} + +static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { + { /* 0 */ + .name = "PDC20268", + .init_setup = init_setup_pdcnew, + .init_chipset = init_chipset_pdcnew, + .init_hwif = init_hwif_pdc202new, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 1 */ + .name = "PDC20269", + .init_setup = init_setup_pdcnew, + .init_chipset = init_chipset_pdcnew, + .init_hwif = init_hwif_pdc202new, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 2 */ + .name = "PDC20270", + .init_setup = init_setup_pdc20270, + .init_chipset = init_chipset_pdcnew, + .init_hwif = init_hwif_pdc202new, + .channels = 2, + .autodma = AUTODMA, +#ifndef CONFIG_PDC202XX_FORCE + .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}}, +#endif + .bootable = OFF_BOARD, + },{ /* 3 */ + .name = "PDC20271", + .init_setup = init_setup_pdcnew, + .init_chipset = init_chipset_pdcnew, + .init_hwif = init_hwif_pdc202new, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 4 */ + .name = "PDC20275", + .init_setup = init_setup_pdcnew, + .init_chipset = init_chipset_pdcnew, + .init_hwif = init_hwif_pdc202new, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 5 */ + .name = "PDC20276", + .init_setup = init_setup_pdc20276, + .init_chipset = init_chipset_pdcnew, + .init_hwif = init_hwif_pdc202new, + .channels = 2, + .autodma = AUTODMA, +#ifndef CONFIG_PDC202XX_FORCE + .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}}, +#endif + .bootable = OFF_BOARD, + },{ /* 6 */ + .name = "PDC20277", + .init_setup = init_setup_pdcnew, + .init_chipset = init_chipset_pdcnew, + .init_hwif = init_hwif_pdc202new, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + } +}; + +/** + * pdc202new_init_one - called when a pdc202xx is found + * @dev: the pdc202new device + * @id: the matching pci id + * + * Called when the PCI registration layer (or the IDE initialization) + * finds a device matching our IDE device tables. + */ + +static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ide_pci_device_t *d = &pdcnew_chipsets[id->driver_data]; + + return d->init_setup(dev, d); +} + +static struct pci_device_id pdc202new_pci_tbl[] = { + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20268, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20269, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20270, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20271, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20275, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20276, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5}, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20277, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl); + +static struct pci_driver driver = { + .name = "Promise_IDE", + .id_table = pdc202new_pci_tbl, + .probe = pdc202new_init_one, +}; + +static int pdc202new_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(pdc202new_ide_init); + +MODULE_AUTHOR("Andre Hedrick, Frank Tiernan"); +MODULE_DESCRIPTION("PCI driver module for Promise PDC20268 and higher"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c new file mode 100644 index 0000000..ad9d9581 --- /dev/null +++ b/drivers/ide/pci/pdc202xx_old.c @@ -0,0 +1,892 @@ +/* + * linux/drivers/ide/pci/pdc202xx_old.c Version 0.36 Sept 11, 2002 + * + * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> + * + * Promise Ultra33 cards with BIOS v1.20 through 1.28 will need this + * compiled into the kernel if you have more than one card installed. + * Note that BIOS v1.29 is reported to fix the problem. Since this is + * safe chipset tuning, including this support is harmless + * + * Promise Ultra66 cards with BIOS v1.11 this + * compiled into the kernel if you have more than one card installed. + * + * Promise Ultra100 cards. + * + * The latest chipset code will support the following :: + * Three Ultra33 controllers and 12 drives. + * 8 are UDMA supported and 4 are limited to DMA mode 2 multi-word. + * The 8/4 ratio is a BIOS code limit by promise. + * + * UNLESS you enable "CONFIG_PDC202XX_BURST" + * + */ + +/* + * Portions Copyright (C) 1999 Promise Technology, Inc. + * Author: Frank Tiernan (frankt@promise.com) + * Released under terms of General Public License + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ide.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#define PDC202_DEBUG_CABLE 0 +#define PDC202XX_DEBUG_DRIVE_INFO 0 + +static const char *pdc_quirk_drives[] = { + "QUANTUM FIREBALLlct08 08", + "QUANTUM FIREBALLP KA6.4", + "QUANTUM FIREBALLP KA9.1", + "QUANTUM FIREBALLP LM20.4", + "QUANTUM FIREBALLP KX13.6", + "QUANTUM FIREBALLP KX20.5", + "QUANTUM FIREBALLP KX27.3", + "QUANTUM FIREBALLP LM20.5", + NULL +}; + +/* A Register */ +#define SYNC_ERRDY_EN 0xC0 + +#define SYNC_IN 0x80 /* control bit, different for master vs. slave drives */ +#define ERRDY_EN 0x40 /* control bit, different for master vs. slave drives */ +#define IORDY_EN 0x20 /* PIO: IOREADY */ +#define PREFETCH_EN 0x10 /* PIO: PREFETCH */ + +#define PA3 0x08 /* PIO"A" timing */ +#define PA2 0x04 /* PIO"A" timing */ +#define PA1 0x02 /* PIO"A" timing */ +#define PA0 0x01 /* PIO"A" timing */ + +/* B Register */ + +#define MB2 0x80 /* DMA"B" timing */ +#define MB1 0x40 /* DMA"B" timing */ +#define MB0 0x20 /* DMA"B" timing */ + +#define PB4 0x10 /* PIO_FORCE 1:0 */ + +#define PB3 0x08 /* PIO"B" timing */ /* PIO flow Control mode */ +#define PB2 0x04 /* PIO"B" timing */ /* PIO 4 */ +#define PB1 0x02 /* PIO"B" timing */ /* PIO 3 half */ +#define PB0 0x01 /* PIO"B" timing */ /* PIO 3 other half */ + +/* C Register */ +#define IORDYp_NO_SPEED 0x4F +#define SPEED_DIS 0x0F + +#define DMARQp 0x80 +#define IORDYp 0x40 +#define DMAR_EN 0x20 +#define DMAW_EN 0x10 + +#define MC3 0x08 /* DMA"C" timing */ +#define MC2 0x04 /* DMA"C" timing */ +#define MC1 0x02 /* DMA"C" timing */ +#define MC0 0x01 /* DMA"C" timing */ + +#if 0 + unsigned long bibma = pci_resource_start(dev, 4); + u8 hi = 0, lo = 0; + + u8 sc1c = inb_p((u16)bibma + 0x1c); + u8 sc1e = inb_p((u16)bibma + 0x1e); + u8 sc1f = inb_p((u16)bibma + 0x1f); + + p += sprintf(p, "Host Mode : %s\n", + (sc1f & 0x08) ? "Tri-Stated" : "Normal"); + p += sprintf(p, "Bus Clocking : %s\n", + ((sc1f & 0xC0) == 0xC0) ? "100 External" : + ((sc1f & 0x80) == 0x80) ? "66 External" : + ((sc1f & 0x40) == 0x40) ? "33 External" : "33 PCI Internal"); + p += sprintf(p, "IO pad select : %s mA\n", + ((sc1c & 0x03) == 0x03) ? "10" : + ((sc1c & 0x02) == 0x02) ? "8" : + ((sc1c & 0x01) == 0x01) ? "6" : + ((sc1c & 0x00) == 0x00) ? "4" : "??"); + hi = sc1e >> 4; + lo = sc1e & 0xf; + p += sprintf(p, "Status Polling Period : %d\n", hi); + p += sprintf(p, "Interrupt Check Status Polling Delay : %d\n", lo); +#endif + +static u8 pdc202xx_ratemask (ide_drive_t *drive) +{ + u8 mode; + + switch(HWIF(drive)->pci_dev->device) { + case PCI_DEVICE_ID_PROMISE_20267: + case PCI_DEVICE_ID_PROMISE_20265: + mode = 3; + break; + case PCI_DEVICE_ID_PROMISE_20263: + case PCI_DEVICE_ID_PROMISE_20262: + mode = 2; + break; + case PCI_DEVICE_ID_PROMISE_20246: + return 1; + default: + return 0; + } + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + return mode; +} + +static int check_in_drive_lists (ide_drive_t *drive, const char **list) +{ + struct hd_driveid *id = drive->id; + + if (pdc_quirk_drives == list) { + while (*list) { + if (strstr(id->model, *list++)) { + return 2; + } + } + } else { + while (*list) { + if (!strcmp(*list++,id->model)) { + return 1; + } + } + } + return 0; +} + +static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 drive_pci = 0x60 + (drive->dn << 2); + u8 speed = ide_rate_filter(pdc202xx_ratemask(drive), xferspeed); + + u32 drive_conf; + u8 AP, BP, CP, DP; + u8 TA = 0, TB = 0, TC = 0; + + if ((drive->media != ide_disk) && (speed < XFER_SW_DMA_0)) + return -1; + + pci_read_config_dword(dev, drive_pci, &drive_conf); + pci_read_config_byte(dev, (drive_pci), &AP); + pci_read_config_byte(dev, (drive_pci)|0x01, &BP); + pci_read_config_byte(dev, (drive_pci)|0x02, &CP); + pci_read_config_byte(dev, (drive_pci)|0x03, &DP); + + if (speed < XFER_SW_DMA_0) { + if ((AP & 0x0F) || (BP & 0x07)) { + /* clear PIO modes of lower 8421 bits of A Register */ + pci_write_config_byte(dev, (drive_pci), AP &~0x0F); + pci_read_config_byte(dev, (drive_pci), &AP); + + /* clear PIO modes of lower 421 bits of B Register */ + pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0x07); + pci_read_config_byte(dev, (drive_pci)|0x01, &BP); + + pci_read_config_byte(dev, (drive_pci), &AP); + pci_read_config_byte(dev, (drive_pci)|0x01, &BP); + } + } else { + if ((BP & 0xF0) && (CP & 0x0F)) { + /* clear DMA modes of upper 842 bits of B Register */ + /* clear PIO forced mode upper 1 bit of B Register */ + pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0xF0); + pci_read_config_byte(dev, (drive_pci)|0x01, &BP); + + /* clear DMA modes of lower 8421 bits of C Register */ + pci_write_config_byte(dev, (drive_pci)|0x02, CP &~0x0F); + pci_read_config_byte(dev, (drive_pci)|0x02, &CP); + } + } + + pci_read_config_byte(dev, (drive_pci), &AP); + pci_read_config_byte(dev, (drive_pci)|0x01, &BP); + pci_read_config_byte(dev, (drive_pci)|0x02, &CP); + + switch(speed) { + case XFER_UDMA_6: speed = XFER_UDMA_5; + case XFER_UDMA_5: + case XFER_UDMA_4: TB = 0x20; TC = 0x01; break; + case XFER_UDMA_2: TB = 0x20; TC = 0x01; break; + case XFER_UDMA_3: + case XFER_UDMA_1: TB = 0x40; TC = 0x02; break; + case XFER_UDMA_0: + case XFER_MW_DMA_2: TB = 0x60; TC = 0x03; break; + case XFER_MW_DMA_1: TB = 0x60; TC = 0x04; break; + case XFER_MW_DMA_0: + case XFER_SW_DMA_2: TB = 0x60; TC = 0x05; break; + case XFER_SW_DMA_1: TB = 0x80; TC = 0x06; break; + case XFER_SW_DMA_0: TB = 0xC0; TC = 0x0B; break; + case XFER_PIO_4: TA = 0x01; TB = 0x04; break; + case XFER_PIO_3: TA = 0x02; TB = 0x06; break; + case XFER_PIO_2: TA = 0x03; TB = 0x08; break; + case XFER_PIO_1: TA = 0x05; TB = 0x0C; break; + case XFER_PIO_0: + default: TA = 0x09; TB = 0x13; break; + } + + if (speed < XFER_SW_DMA_0) { + pci_write_config_byte(dev, (drive_pci), AP|TA); + pci_write_config_byte(dev, (drive_pci)|0x01, BP|TB); + } else { + pci_write_config_byte(dev, (drive_pci)|0x01, BP|TB); + pci_write_config_byte(dev, (drive_pci)|0x02, CP|TC); + } + +#if PDC202XX_DEBUG_DRIVE_INFO + printk(KERN_DEBUG "%s: %s drive%d 0x%08x ", + drive->name, ide_xfer_verbose(speed), + drive->dn, drive_conf); + pci_read_config_dword(dev, drive_pci, &drive_conf); + printk("0x%08x\n", drive_conf); +#endif /* PDC202XX_DEBUG_DRIVE_INFO */ + + return (ide_config_drive_speed(drive, speed)); +} + + +/* 0 1 2 3 4 5 6 7 8 + * 960, 480, 390, 300, 240, 180, 120, 90, 60 + * 180, 150, 120, 90, 60 + * DMA_Speed + * 180, 120, 90, 90, 90, 60, 30 + * 11, 5, 4, 3, 2, 1, 0 + */ +static void config_chipset_for_pio (ide_drive_t *drive, u8 pio) +{ + u8 speed = 0; + + if (pio == 5) pio = 4; + speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, pio, NULL); + + pdc202xx_tune_chipset(drive, speed); +} + +static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif) +{ + u16 CIS = 0, mask = (hwif->channel) ? (1<<11) : (1<<10); + pci_read_config_word(hwif->pci_dev, 0x50, &CIS); + return (CIS & mask) ? 1 : 0; +} + +/* + * Set the control register to use the 66MHz system + * clock for UDMA 3/4/5 mode operation when necessary. + * + * It may also be possible to leave the 66MHz clock on + * and readjust the timing parameters. + */ +static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif) +{ + unsigned long clock_reg = hwif->dma_master + 0x11; + u8 clock = hwif->INB(clock_reg); + + hwif->OUTB(clock | (hwif->channel ? 0x08 : 0x02), clock_reg); +} + +static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif) +{ + unsigned long clock_reg = hwif->dma_master + 0x11; + u8 clock = hwif->INB(clock_reg); + + hwif->OUTB(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg); +} + +static int config_chipset_for_dma (ide_drive_t *drive) +{ + struct hd_driveid *id = drive->id; + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u32 drive_conf = 0; + u8 drive_pci = 0x60 + (drive->dn << 2); + u8 test1 = 0, test2 = 0, speed = -1; + u8 AP = 0, cable = 0; + + u8 ultra_66 = ((id->dma_ultra & 0x0010) || + (id->dma_ultra & 0x0008)) ? 1 : 0; + + if (dev->device != PCI_DEVICE_ID_PROMISE_20246) + cable = pdc202xx_old_cable_detect(hwif); + else + ultra_66 = 0; + + if (ultra_66 && cable) { + printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary"); + printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name); + } + + if (dev->device != PCI_DEVICE_ID_PROMISE_20246) + pdc_old_disable_66MHz_clock(drive->hwif); + + drive_pci = 0x60 + (drive->dn << 2); + pci_read_config_dword(dev, drive_pci, &drive_conf); + if ((drive_conf != 0x004ff304) && (drive_conf != 0x004ff3c4)) + goto chipset_is_set; + + pci_read_config_byte(dev, drive_pci, &test1); + if (!(test1 & SYNC_ERRDY_EN)) { + if (drive->select.b.unit & 0x01) { + pci_read_config_byte(dev, drive_pci - 4, &test2); + if ((test2 & SYNC_ERRDY_EN) && + !(test1 & SYNC_ERRDY_EN)) { + pci_write_config_byte(dev, drive_pci, + test1|SYNC_ERRDY_EN); + } + } else { + pci_write_config_byte(dev, drive_pci, + test1|SYNC_ERRDY_EN); + } + } + +chipset_is_set: + + if (drive->media == ide_disk) { + pci_read_config_byte(dev, (drive_pci), &AP); + if (id->capability & 4) /* IORDY_EN */ + pci_write_config_byte(dev, (drive_pci), AP|IORDY_EN); + pci_read_config_byte(dev, (drive_pci), &AP); + if (drive->media == ide_disk) /* PREFETCH_EN */ + pci_write_config_byte(dev, (drive_pci), AP|PREFETCH_EN); + } + + speed = ide_dma_speed(drive, pdc202xx_ratemask(drive)); + + if (!(speed)) { + /* restore original pci-config space */ + pci_write_config_dword(dev, drive_pci, drive_conf); + hwif->tuneproc(drive, 5); + return 0; + } + + (void) hwif->speedproc(drive, speed); + return ide_dma_enable(drive); +} + +static int pdc202xx_config_drive_xfer_rate (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + drive->init_speed = 0; + + if (id && (id->capability & 1) && drive->autodma) { + + if (ide_use_dma(drive)) { + if (config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + hwif->tuneproc(drive, 5); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +static int pdc202xx_quirkproc (ide_drive_t *drive) +{ + return ((int) check_in_drive_lists(drive, pdc_quirk_drives)); +} + +static void pdc202xx_old_ide_dma_start(ide_drive_t *drive) +{ + if (drive->current_speed > XFER_UDMA_2) + pdc_old_enable_66MHz_clock(drive->hwif); + if (drive->addressing == 1) { + struct request *rq = HWGROUP(drive)->rq; + ide_hwif_t *hwif = HWIF(drive); +// struct pci_dev *dev = hwif->pci_dev; +// unsgned long high_16 = pci_resource_start(dev, 4); + unsigned long high_16 = hwif->dma_master; + unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20); + u32 word_count = 0; + u8 clock = hwif->INB(high_16 + 0x11); + + hwif->OUTB(clock|(hwif->channel ? 0x08 : 0x02), high_16+0x11); + word_count = (rq->nr_sectors << 8); + word_count = (rq_data_dir(rq) == READ) ? + word_count | 0x05000000 : + word_count | 0x06000000; + hwif->OUTL(word_count, atapi_reg); + } + ide_dma_start(drive); +} + +static int pdc202xx_old_ide_dma_end(ide_drive_t *drive) +{ + if (drive->addressing == 1) { + ide_hwif_t *hwif = HWIF(drive); +// unsigned long high_16 = pci_resource_start(hwif->pci_dev, 4); + unsigned long high_16 = hwif->dma_master; + unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20); + u8 clock = 0; + + hwif->OUTL(0, atapi_reg); /* zero out extra */ + clock = hwif->INB(high_16 + 0x11); + hwif->OUTB(clock & ~(hwif->channel ? 0x08:0x02), high_16+0x11); + } + if (drive->current_speed > XFER_UDMA_2) + pdc_old_disable_66MHz_clock(drive->hwif); + return __ide_dma_end(drive); +} + +static int pdc202xx_old_ide_dma_test_irq(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); +// struct pci_dev *dev = hwif->pci_dev; +// unsigned long high_16 = pci_resource_start(dev, 4); + unsigned long high_16 = hwif->dma_master; + u8 dma_stat = hwif->INB(hwif->dma_status); + u8 sc1d = hwif->INB((high_16 + 0x001d)); + + if (hwif->channel) { + /* bit7: Error, bit6: Interrupting, bit5: FIFO Full, bit4: FIFO Empty */ + if ((sc1d & 0x50) == 0x50) + goto somebody_else; + else if ((sc1d & 0x40) == 0x40) + return (dma_stat & 4) == 4; + } else { + /* bit3: Error, bit2: Interrupting, bit1: FIFO Full, bit0: FIFO Empty */ + if ((sc1d & 0x05) == 0x05) + goto somebody_else; + else if ((sc1d & 0x04) == 0x04) + return (dma_stat & 4) == 4; + } +somebody_else: + return (dma_stat & 4) == 4; /* return 1 if INTR asserted */ +} + +static int pdc202xx_ide_dma_lostirq(ide_drive_t *drive) +{ + if (HWIF(drive)->resetproc != NULL) + HWIF(drive)->resetproc(drive); + return __ide_dma_lostirq(drive); +} + +static int pdc202xx_ide_dma_timeout(ide_drive_t *drive) +{ + if (HWIF(drive)->resetproc != NULL) + HWIF(drive)->resetproc(drive); + return __ide_dma_timeout(drive); +} + +static void pdc202xx_reset_host (ide_hwif_t *hwif) +{ +#ifdef CONFIG_BLK_DEV_IDEDMA +// unsigned long high_16 = hwif->dma_base - (8*(hwif->channel)); + unsigned long high_16 = hwif->dma_master; +#else /* !CONFIG_BLK_DEV_IDEDMA */ + unsigned long high_16 = pci_resource_start(hwif->pci_dev, 4); +#endif /* CONFIG_BLK_DEV_IDEDMA */ + u8 udma_speed_flag = hwif->INB(high_16|0x001f); + + hwif->OUTB((udma_speed_flag | 0x10), (high_16|0x001f)); + mdelay(100); + hwif->OUTB((udma_speed_flag & ~0x10), (high_16|0x001f)); + mdelay(2000); /* 2 seconds ?! */ + + printk(KERN_WARNING "PDC202XX: %s channel reset.\n", + hwif->channel ? "Secondary" : "Primary"); +} + +static void pdc202xx_reset (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + ide_hwif_t *mate = hwif->mate; + + pdc202xx_reset_host(hwif); + pdc202xx_reset_host(mate); +#if 0 + /* + * FIXME: Have to kick all the drives again :-/ + * What a pain in the ACE! + */ + if (hwif->present) { + u16 hunit = 0; + for (hunit = 0; hunit < MAX_DRIVES; ++hunit) { + ide_drive_t *hdrive = &hwif->drives[hunit]; + if (hdrive->present) { + if (hwif->ide_dma_check) + hwif->ide_dma_check(hdrive); + else + hwif->tuneproc(hdrive, 5); + } + } + } + if (mate->present) { + u16 munit = 0; + for (munit = 0; munit < MAX_DRIVES; ++munit) { + ide_drive_t *mdrive = &mate->drives[munit]; + if (mdrive->present) { + if (mate->ide_dma_check) + mate->ide_dma_check(mdrive); + else + mate->tuneproc(mdrive, 5); + } + } + } +#else + hwif->tuneproc(drive, 5); +#endif +} + +/* + * Since SUN Cobalt is attempting to do this operation, I should disclose + * this has been a long time ago Thu Jul 27 16:40:57 2000 was the patch date + * HOTSWAP ATA Infrastructure. + */ +static int pdc202xx_tristate (ide_drive_t * drive, int state) +{ + ide_hwif_t *hwif = HWIF(drive); +// unsigned long high_16 = hwif->dma_base - (8*(hwif->channel)); + unsigned long high_16 = hwif->dma_master; + u8 sc1f = hwif->INB(high_16|0x001f); + + if (!hwif) + return -EINVAL; + +// hwif->bus_state = state; + + if (state) { + hwif->OUTB(sc1f | 0x08, (high_16|0x001f)); + } else { + hwif->OUTB(sc1f & ~0x08, (high_16|0x001f)); + } + return 0; +} + +static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev, const char *name) +{ + if (dev->resource[PCI_ROM_RESOURCE].start) { + pci_write_config_dword(dev, PCI_ROM_ADDRESS, + dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); + printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", + name, dev->resource[PCI_ROM_RESOURCE].start); + } + + /* + * software reset - this is required because the bios + * will set UDMA timing on if the hdd supports it. The + * user may want to turn udma off. A bug in the pdc20262 + * is that it cannot handle a downgrade in timing from + * UDMA to DMA. Disk accesses after issuing a set + * feature command will result in errors. A software + * reset leaves the timing registers intact, + * but resets the drives. + */ +#if 0 + if ((dev->device == PCI_DEVICE_ID_PROMISE_20267) || + (dev->device == PCI_DEVICE_ID_PROMISE_20265) || + (dev->device == PCI_DEVICE_ID_PROMISE_20263) || + (dev->device == PCI_DEVICE_ID_PROMISE_20262)) { + unsigned long high_16 = pci_resource_start(dev, 4); + byte udma_speed_flag = inb(high_16 + 0x001f); + outb(udma_speed_flag | 0x10, high_16 + 0x001f); + mdelay(100); + outb(udma_speed_flag & ~0x10, high_16 + 0x001f); + mdelay(2000); /* 2 seconds ?! */ + } + +#endif + return dev->irq; +} + +static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + + /* PDC20265 has problems with large LBA48 requests */ + if ((dev->device == PCI_DEVICE_ID_PROMISE_20267) || + (dev->device == PCI_DEVICE_ID_PROMISE_20265)) + hwif->rqsize = 256; + + hwif->autodma = 0; + hwif->tuneproc = &config_chipset_for_pio; + hwif->quirkproc = &pdc202xx_quirkproc; + + if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246) { + hwif->busproc = &pdc202xx_tristate; + hwif->resetproc = &pdc202xx_reset; + } + + hwif->speedproc = &pdc202xx_tune_chipset; + + hwif->drives[0].autotune = hwif->drives[1].autotune = 1; + + hwif->ultra_mask = 0x3f; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + hwif->ide_dma_check = &pdc202xx_config_drive_xfer_rate; + hwif->ide_dma_lostirq = &pdc202xx_ide_dma_lostirq; + hwif->ide_dma_timeout = &pdc202xx_ide_dma_timeout; + + if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246) { + if (!(hwif->udma_four)) + hwif->udma_four = (pdc202xx_old_cable_detect(hwif)) ? 0 : 1; + hwif->dma_start = &pdc202xx_old_ide_dma_start; + hwif->ide_dma_end = &pdc202xx_old_ide_dma_end; + } + hwif->ide_dma_test_irq = &pdc202xx_old_ide_dma_test_irq; + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; +#if PDC202_DEBUG_CABLE + printk(KERN_DEBUG "%s: %s-pin cable\n", + hwif->name, hwif->udma_four ? "80" : "40"); +#endif /* PDC202_DEBUG_CABLE */ +} + +static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase) +{ + u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0; + + if (hwif->channel) { + ide_setup_dma(hwif, dmabase, 8); + return; + } + + udma_speed_flag = hwif->INB((dmabase|0x1f)); + primary_mode = hwif->INB((dmabase|0x1a)); + secondary_mode = hwif->INB((dmabase|0x1b)); + printk(KERN_INFO "%s: (U)DMA Burst Bit %sABLED " \ + "Primary %s Mode " \ + "Secondary %s Mode.\n", hwif->cds->name, + (udma_speed_flag & 1) ? "EN" : "DIS", + (primary_mode & 1) ? "MASTER" : "PCI", + (secondary_mode & 1) ? "MASTER" : "PCI" ); + +#ifdef CONFIG_PDC202XX_BURST + if (!(udma_speed_flag & 1)) { + printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ", + hwif->cds->name, udma_speed_flag, + (udma_speed_flag|1)); + hwif->OUTB(udma_speed_flag|1,(dmabase|0x1f)); + printk("%sACTIVE\n", + (hwif->INB(dmabase|0x1f)&1) ? "":"IN"); + } +#endif /* CONFIG_PDC202XX_BURST */ +#ifdef CONFIG_PDC202XX_MASTER + if (!(primary_mode & 1)) { + printk(KERN_INFO "%s: FORCING PRIMARY MODE BIT " + "0x%02x -> 0x%02x ", hwif->cds->name, + primary_mode, (primary_mode|1)); + hwif->OUTB(primary_mode|1, (dmabase|0x1a)); + printk("%s\n", + (hwif->INB((dmabase|0x1a)) & 1) ? "MASTER" : "PCI"); + } + + if (!(secondary_mode & 1)) { + printk(KERN_INFO "%s: FORCING SECONDARY MODE BIT " + "0x%02x -> 0x%02x ", hwif->cds->name, + secondary_mode, (secondary_mode|1)); + hwif->OUTB(secondary_mode|1, (dmabase|0x1b)); + printk("%s\n", + (hwif->INB((dmabase|0x1b)) & 1) ? "MASTER" : "PCI"); + } +#endif /* CONFIG_PDC202XX_MASTER */ + + ide_setup_dma(hwif, dmabase, 8); +} + +static int __devinit init_setup_pdc202ata4(struct pci_dev *dev, + ide_pci_device_t *d) +{ + if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) { + u8 irq = 0, irq2 = 0; + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); + /* 0xbc */ + pci_read_config_byte(dev, (PCI_INTERRUPT_LINE)|0x80, &irq2); + if (irq != irq2) { + pci_write_config_byte(dev, + (PCI_INTERRUPT_LINE)|0x80, irq); /* 0xbc */ + printk(KERN_INFO "%s: pci-config space interrupt " + "mirror fixed.\n", d->name); + } + } + +#if 0 + if (dev->device == PCI_DEVICE_ID_PROMISE_20262) + if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) || + (tmp & e->mask) != e->val)) + + if (d->enablebits[0].reg != d->enablebits[1].reg) { + d->enablebits[0].reg = d->enablebits[1].reg; + d->enablebits[0].mask = d->enablebits[1].mask; + d->enablebits[0].val = d->enablebits[1].val; + } +#endif + + return ide_setup_pci_device(dev, d); +} + +static int __devinit init_setup_pdc20265(struct pci_dev *dev, + ide_pci_device_t *d) +{ + if ((dev->bus->self) && + (dev->bus->self->vendor == PCI_VENDOR_ID_INTEL) && + ((dev->bus->self->device == PCI_DEVICE_ID_INTEL_I960) || + (dev->bus->self->device == PCI_DEVICE_ID_INTEL_I960RM))) { + printk(KERN_INFO "ide: Skipping Promise PDC20265 " + "attached to I2O RAID controller.\n"); + return -ENODEV; + } + +#if 0 + { + u8 pri = 0, sec = 0; + + if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) || + (tmp & e->mask) != e->val)) + + if (d->enablebits[0].reg != d->enablebits[1].reg) { + d->enablebits[0].reg = d->enablebits[1].reg; + d->enablebits[0].mask = d->enablebits[1].mask; + d->enablebits[0].val = d->enablebits[1].val; + } + } +#endif + + return ide_setup_pci_device(dev, d); +} + +static int __devinit init_setup_pdc202xx(struct pci_dev *dev, + ide_pci_device_t *d) +{ + return ide_setup_pci_device(dev, d); +} + +static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = { + { /* 0 */ + .name = "PDC20246", + .init_setup = init_setup_pdc202ata4, + .init_chipset = init_chipset_pdc202xx, + .init_hwif = init_hwif_pdc202xx, + .init_dma = init_dma_pdc202xx, + .channels = 2, + .autodma = AUTODMA, +#ifndef CONFIG_PDC202XX_FORCE + .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}}, +#endif + .bootable = OFF_BOARD, + .extra = 16, + },{ /* 1 */ + .name = "PDC20262", + .init_setup = init_setup_pdc202ata4, + .init_chipset = init_chipset_pdc202xx, + .init_hwif = init_hwif_pdc202xx, + .init_dma = init_dma_pdc202xx, + .channels = 2, + .autodma = AUTODMA, +#ifndef CONFIG_PDC202XX_FORCE + .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}}, +#endif + .bootable = OFF_BOARD, + .extra = 48, + .flags = IDEPCI_FLAG_FORCE_PDC, + },{ /* 2 */ + .name = "PDC20263", + .init_setup = init_setup_pdc202ata4, + .init_chipset = init_chipset_pdc202xx, + .init_hwif = init_hwif_pdc202xx, + .init_dma = init_dma_pdc202xx, + .channels = 2, + .autodma = AUTODMA, +#ifndef CONFIG_PDC202XX_FORCE + .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}}, +#endif + .bootable = OFF_BOARD, + .extra = 48, + },{ /* 3 */ + .name = "PDC20265", + .init_setup = init_setup_pdc20265, + .init_chipset = init_chipset_pdc202xx, + .init_hwif = init_hwif_pdc202xx, + .init_dma = init_dma_pdc202xx, + .channels = 2, + .autodma = AUTODMA, +#ifndef CONFIG_PDC202XX_FORCE + .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}}, +#endif + .bootable = OFF_BOARD, + .extra = 48, + .flags = IDEPCI_FLAG_FORCE_PDC, + },{ /* 4 */ + .name = "PDC20267", + .init_setup = init_setup_pdc202xx, + .init_chipset = init_chipset_pdc202xx, + .init_hwif = init_hwif_pdc202xx, + .init_dma = init_dma_pdc202xx, + .channels = 2, + .autodma = AUTODMA, +#ifndef CONFIG_PDC202XX_FORCE + .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}}, +#endif + .bootable = OFF_BOARD, + .extra = 48, + } +}; + +/** + * pdc202xx_init_one - called when a PDC202xx is found + * @dev: the pdc202xx device + * @id: the matching pci id + * + * Called when the PCI registration layer (or the IDE initialization) + * finds a device matching our IDE device tables. + */ + +static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ide_pci_device_t *d = &pdc202xx_chipsets[id->driver_data]; + + return d->init_setup(dev, d); +} + +static struct pci_device_id pdc202xx_pci_tbl[] = { + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20246, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20262, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20265, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20267, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, pdc202xx_pci_tbl); + +static struct pci_driver driver = { + .name = "Promise_Old_IDE", + .id_table = pdc202xx_pci_tbl, + .probe = pdc202xx_init_one, +}; + +static int pdc202xx_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(pdc202xx_ide_init); + +MODULE_AUTHOR("Andre Hedrick, Frank Tiernan"); +MODULE_DESCRIPTION("PCI driver module for older Promise IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c new file mode 100644 index 0000000..b5a20ae --- /dev/null +++ b/drivers/ide/pci/piix.c @@ -0,0 +1,670 @@ +/* + * linux/drivers/ide/pci/piix.c Version 0.44 March 20, 2003 + * + * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer + * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * + * May be copied or modified under the terms of the GNU General Public License + * + * PIO mode setting function for Intel chipsets. + * For use instead of BIOS settings. + * + * 40-41 + * 42-43 + * + * 41 + * 43 + * + * | PIO 0 | c0 | 80 | 0 | piix_tune_drive(drive, 0); + * | PIO 2 | SW2 | d0 | 90 | 4 | piix_tune_drive(drive, 2); + * | PIO 3 | MW1 | e1 | a1 | 9 | piix_tune_drive(drive, 3); + * | PIO 4 | MW2 | e3 | a3 | b | piix_tune_drive(drive, 4); + * + * sitre = word40 & 0x4000; primary + * sitre = word42 & 0x4000; secondary + * + * 44 8421|8421 hdd|hdb + * + * 48 8421 hdd|hdc|hdb|hda udma enabled + * + * 0001 hda + * 0010 hdb + * 0100 hdc + * 1000 hdd + * + * 4a 84|21 hdb|hda + * 4b 84|21 hdd|hdc + * + * ata-33/82371AB + * ata-33/82371EB + * ata-33/82801AB ata-66/82801AA + * 00|00 udma 0 00|00 reserved + * 01|01 udma 1 01|01 udma 3 + * 10|10 udma 2 10|10 udma 4 + * 11|11 reserved 11|11 reserved + * + * 54 8421|8421 ata66 drive|ata66 enable + * + * pci_read_config_word(HWIF(drive)->pci_dev, 0x40, ®40); + * pci_read_config_word(HWIF(drive)->pci_dev, 0x42, ®42); + * pci_read_config_word(HWIF(drive)->pci_dev, 0x44, ®44); + * pci_read_config_byte(HWIF(drive)->pci_dev, 0x48, ®48); + * pci_read_config_word(HWIF(drive)->pci_dev, 0x4a, ®4a); + * pci_read_config_byte(HWIF(drive)->pci_dev, 0x54, ®54); + * + * Documentation + * Publically available from Intel web site. Errata documentation + * is also publically available. As an aide to anyone hacking on this + * driver the list of errata that are relevant is below.going back to + * PIIX4. Older device documentation is now a bit tricky to find. + * + * Errata of note: + * + * Unfixable + * PIIX4 errata #9 - Only on ultra obscure hw + * ICH3 errata #13 - Not observed to affect real hw + * by Intel + * + * Things we must deal with + * PIIX4 errata #10 - BM IDE hang with non UDMA + * (must stop/start dma to recover) + * 440MX errata #15 - As PIIX4 errata #10 + * PIIX4 errata #15 - Must not read control registers + * during a PIO transfer + * 440MX errata #13 - As PIIX4 errata #15 + * ICH2 errata #21 - DMA mode 0 doesn't work right + * ICH0/1 errata #55 - As ICH2 errata #21 + * ICH2 spec c #9 - Extra operations needed to handle + * drive hotswap [NOT YET SUPPORTED] + * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary + * and must be dword aligned + * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3 + * + * Should have been BIOS fixed: + * 450NX: errata #19 - DMA hangs on old 450NX + * 450NX: errata #20 - DMA hangs on old 450NX + * 450NX: errata #25 - Corruption with DMA on old 450NX + * ICH3 errata #15 - IDE deadlock under high load + * (BIOS must set dev 31 fn 0 bit 23) + * ICH3 errata #18 - Don't use native mode + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/delay.h> +#include <linux/init.h> + +#include <asm/io.h> + +static int no_piix_dma; + +/** + * piix_ratemask - compute rate mask for PIIX IDE + * @drive: IDE drive to compute for + * + * Returns the available modes for the PIIX IDE controller. + */ + +static u8 piix_ratemask (ide_drive_t *drive) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + u8 mode; + + switch(dev->device) { + case PCI_DEVICE_ID_INTEL_82801EB_1: + mode = 3; + break; + /* UDMA 100 capable */ + case PCI_DEVICE_ID_INTEL_82801BA_8: + case PCI_DEVICE_ID_INTEL_82801BA_9: + case PCI_DEVICE_ID_INTEL_82801CA_10: + case PCI_DEVICE_ID_INTEL_82801CA_11: + case PCI_DEVICE_ID_INTEL_82801E_11: + case PCI_DEVICE_ID_INTEL_82801DB_1: + case PCI_DEVICE_ID_INTEL_82801DB_10: + case PCI_DEVICE_ID_INTEL_82801DB_11: + case PCI_DEVICE_ID_INTEL_82801EB_11: + case PCI_DEVICE_ID_INTEL_ESB_2: + case PCI_DEVICE_ID_INTEL_ICH6_19: + case PCI_DEVICE_ID_INTEL_ICH7_21: + mode = 3; + break; + /* UDMA 66 capable */ + case PCI_DEVICE_ID_INTEL_82801AA_1: + case PCI_DEVICE_ID_INTEL_82372FB_1: + mode = 2; + break; + /* UDMA 33 capable */ + case PCI_DEVICE_ID_INTEL_82371AB: + case PCI_DEVICE_ID_INTEL_82443MX_1: + case PCI_DEVICE_ID_INTEL_82451NX: + case PCI_DEVICE_ID_INTEL_82801AB_1: + return 1; + /* Non UDMA capable (MWDMA2) */ + case PCI_DEVICE_ID_INTEL_82371SB_1: + case PCI_DEVICE_ID_INTEL_82371FB_1: + case PCI_DEVICE_ID_INTEL_82371FB_0: + case PCI_DEVICE_ID_INTEL_82371MX: + default: + return 0; + } + + /* + * If we are UDMA66 capable fall back to UDMA33 + * if the drive cannot see an 80pin cable. + */ + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + return mode; +} + +/** + * piix_dma_2_pio - return the PIO mode matching DMA + * @xfer_rate: transfer speed + * + * Returns the nearest equivalent PIO timing for the PIO or DMA + * mode requested by the controller. + */ + +static u8 piix_dma_2_pio (u8 xfer_rate) { + switch(xfer_rate) { + case XFER_UDMA_6: + case XFER_UDMA_5: + case XFER_UDMA_4: + case XFER_UDMA_3: + case XFER_UDMA_2: + case XFER_UDMA_1: + case XFER_UDMA_0: + case XFER_MW_DMA_2: + case XFER_PIO_4: + return 4; + case XFER_MW_DMA_1: + case XFER_PIO_3: + return 3; + case XFER_SW_DMA_2: + case XFER_PIO_2: + return 2; + case XFER_MW_DMA_0: + case XFER_SW_DMA_1: + case XFER_SW_DMA_0: + case XFER_PIO_1: + case XFER_PIO_0: + case XFER_PIO_SLOW: + default: + return 0; + } +} + +/** + * piix_tune_drive - tune a drive attached to a PIIX + * @drive: drive to tune + * @pio: desired PIO mode + * + * Set the interface PIO mode based upon the settings done by AMI BIOS + * (might be useful if drive is not registered in CMOS for any reason). + */ +static void piix_tune_drive (ide_drive_t *drive, u8 pio) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + int is_slave = (&hwif->drives[1] == drive); + int master_port = hwif->channel ? 0x42 : 0x40; + int slave_port = 0x44; + unsigned long flags; + u16 master_data; + u8 slave_data; + /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pio = ide_get_best_pio_mode(drive, pio, 5, NULL); + spin_lock_irqsave(&ide_lock, flags); + pci_read_config_word(dev, master_port, &master_data); + if (is_slave) { + master_data = master_data | 0x4000; + if (pio > 1) + /* enable PPE, IE and TIME */ + master_data = master_data | 0x0070; + pci_read_config_byte(dev, slave_port, &slave_data); + slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0); + slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0)); + } else { + master_data = master_data & 0xccf8; + if (pio > 1) + /* enable PPE, IE and TIME */ + master_data = master_data | 0x0007; + master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8); + } + pci_write_config_word(dev, master_port, master_data); + if (is_slave) + pci_write_config_byte(dev, slave_port, slave_data); + spin_unlock_irqrestore(&ide_lock, flags); +} + +/** + * piix_tune_chipset - tune a PIIX interface + * @drive: IDE drive to tune + * @xferspeed: speed to configure + * + * Set a PIIX interface channel to the desired speeds. This involves + * requires the right timing data into the PIIX configuration space + * then setting the drive parameters appropriately + */ + +static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 maslave = hwif->channel ? 0x42 : 0x40; + u8 speed = ide_rate_filter(piix_ratemask(drive), xferspeed); + int a_speed = 3 << (drive->dn * 4); + int u_flag = 1 << drive->dn; + int v_flag = 0x01 << drive->dn; + int w_flag = 0x10 << drive->dn; + int u_speed = 0; + int sitre; + u16 reg4042, reg4a; + u8 reg48, reg54, reg55; + + pci_read_config_word(dev, maslave, ®4042); + sitre = (reg4042 & 0x4000) ? 1 : 0; + pci_read_config_byte(dev, 0x48, ®48); + pci_read_config_word(dev, 0x4a, ®4a); + pci_read_config_byte(dev, 0x54, ®54); + pci_read_config_byte(dev, 0x55, ®55); + + switch(speed) { + case XFER_UDMA_4: + case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break; + case XFER_UDMA_5: + case XFER_UDMA_3: + case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break; + case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break; + case XFER_MW_DMA_2: + case XFER_MW_DMA_1: + case XFER_SW_DMA_2: break; + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_0: break; + default: return -1; + } + + if (speed >= XFER_UDMA_0) { + if (!(reg48 & u_flag)) + pci_write_config_byte(dev, 0x48, reg48 | u_flag); + if (speed == XFER_UDMA_5) { + pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); + } else { + pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + } + if ((reg4a & a_speed) != u_speed) + pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); + if (speed > XFER_UDMA_2) { + if (!(reg54 & v_flag)) + pci_write_config_byte(dev, 0x54, reg54 | v_flag); + } else + pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); + } else { + if (reg48 & u_flag) + pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); + if (reg4a & a_speed) + pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); + if (reg54 & v_flag) + pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); + if (reg55 & w_flag) + pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + } + + piix_tune_drive(drive, piix_dma_2_pio(speed)); + return (ide_config_drive_speed(drive, speed)); +} + +/** + * piix_faulty_dma0 - check for DMA0 errata + * @hwif: IDE interface to check + * + * If an ICH/ICH0/ICH2 interface is is operating in multi-word + * DMA mode with 600nS cycle time the IDE PIO prefetch buffer will + * inadvertently provide an extra piece of secondary data to the primary + * device resulting in data corruption. + * + * With such a device this test function returns true. This allows + * our tuning code to follow Intel recommendations and use PIO on + * such devices. + */ + +static int piix_faulty_dma0(ide_hwif_t *hwif) +{ + switch(hwif->pci_dev->device) + { + case PCI_DEVICE_ID_INTEL_82801AA_1: /* ICH */ + case PCI_DEVICE_ID_INTEL_82801AB_1: /* ICH0 */ + case PCI_DEVICE_ID_INTEL_82801BA_8: /* ICH2 */ + case PCI_DEVICE_ID_INTEL_82801BA_9: /* ICH2 */ + return 1; + } + return 0; +} + +/** + * piix_config_drive_for_dma - configure drive for DMA + * @drive: IDE drive to configure + * + * Set up a PIIX interface channel for the best available speed. + * We prefer UDMA if it is available and then MWDMA. If DMA is + * not available we switch to PIO and return 0. + */ + +static int piix_config_drive_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, piix_ratemask(drive)); + + /* Some ICH devices cannot support DMA mode 0 */ + if(speed == XFER_MW_DMA_0 && piix_faulty_dma0(HWIF(drive))) + speed = 0; + + /* If no DMA speed was available or the chipset has DMA bugs + then disable DMA and use PIO */ + + if (!speed || no_piix_dma) { + u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL); + speed = piix_dma_2_pio(XFER_PIO_0 + tspeed); + } + + (void) piix_tune_chipset(drive, speed); + return ide_dma_enable(drive); +} + +/** + * piix_config_drive_xfer_rate - set up an IDE device + * @drive: IDE drive to configure + * + * Set up the PIIX interface for the best available speed on this + * interface, preferring DMA to PIO. + */ + +static int piix_config_drive_xfer_rate (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + drive->init_speed = 0; + + if ((id->capability & 1) && drive->autodma) { + + if (ide_use_dma(drive)) { + if (piix_config_drive_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + /* Find best PIO mode. */ + hwif->tuneproc(drive, 255); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +/** + * init_chipset_piix - set up the PIIX chipset + * @dev: PCI device to set up + * @name: Name of the device + * + * Initialize the PCI device as required. For the PIIX this turns + * out to be nice and simple + */ + +static unsigned int __devinit init_chipset_piix (struct pci_dev *dev, const char *name) +{ + switch(dev->device) { + case PCI_DEVICE_ID_INTEL_82801EB_1: + case PCI_DEVICE_ID_INTEL_82801AA_1: + case PCI_DEVICE_ID_INTEL_82801AB_1: + case PCI_DEVICE_ID_INTEL_82801BA_8: + case PCI_DEVICE_ID_INTEL_82801BA_9: + case PCI_DEVICE_ID_INTEL_82801CA_10: + case PCI_DEVICE_ID_INTEL_82801CA_11: + case PCI_DEVICE_ID_INTEL_82801DB_1: + case PCI_DEVICE_ID_INTEL_82801DB_10: + case PCI_DEVICE_ID_INTEL_82801DB_11: + case PCI_DEVICE_ID_INTEL_82801EB_11: + case PCI_DEVICE_ID_INTEL_82801E_11: + case PCI_DEVICE_ID_INTEL_ESB_2: + case PCI_DEVICE_ID_INTEL_ICH6_19: + case PCI_DEVICE_ID_INTEL_ICH7_21: + { + unsigned int extra = 0; + pci_read_config_dword(dev, 0x54, &extra); + pci_write_config_dword(dev, 0x54, extra|0x400); + } + default: + break; + } + + return 0; +} + +/** + * init_hwif_piix - fill in the hwif for the PIIX + * @hwif: IDE interface + * + * Set up the ide_hwif_t for the PIIX interface according to the + * capabilities of the hardware. + */ + +static void __devinit init_hwif_piix(ide_hwif_t *hwif) +{ + u8 reg54h = 0, reg55h = 0, ata66 = 0; + u8 mask = hwif->channel ? 0xc0 : 0x30; + +#ifndef CONFIG_IA64 + if (!hwif->irq) + hwif->irq = hwif->channel ? 15 : 14; +#endif /* CONFIG_IA64 */ + + if (hwif->pci_dev->device == PCI_DEVICE_ID_INTEL_82371MX) { + /* This is a painful system best to let it self tune for now */ + return; + } + + hwif->autodma = 0; + hwif->tuneproc = &piix_tune_drive; + hwif->speedproc = &piix_tune_chipset; + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + + if (!hwif->dma_base) + return; + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x3f; + hwif->mwdma_mask = 0x06; + hwif->swdma_mask = 0x04; + + switch(hwif->pci_dev->device) { + case PCI_DEVICE_ID_INTEL_82371MX: + hwif->mwdma_mask = 0x80; + hwif->swdma_mask = 0x80; + case PCI_DEVICE_ID_INTEL_82371FB_0: + case PCI_DEVICE_ID_INTEL_82371FB_1: + case PCI_DEVICE_ID_INTEL_82371SB_1: + hwif->ultra_mask = 0x80; + break; + case PCI_DEVICE_ID_INTEL_82371AB: + case PCI_DEVICE_ID_INTEL_82443MX_1: + case PCI_DEVICE_ID_INTEL_82451NX: + case PCI_DEVICE_ID_INTEL_82801AB_1: + hwif->ultra_mask = 0x07; + break; + default: + pci_read_config_byte(hwif->pci_dev, 0x54, ®54h); + pci_read_config_byte(hwif->pci_dev, 0x55, ®55h); + ata66 = (reg54h & mask) ? 1 : 0; + break; + } + + if (!(hwif->udma_four)) + hwif->udma_four = ata66; + hwif->ide_dma_check = &piix_config_drive_xfer_rate; + if (!noautodma) + hwif->autodma = 1; + + hwif->drives[1].autodma = hwif->autodma; + hwif->drives[0].autodma = hwif->autodma; +} + +#define DECLARE_PIIX_DEV(name_str) \ + { \ + .name = name_str, \ + .init_chipset = init_chipset_piix, \ + .init_hwif = init_hwif_piix, \ + .channels = 2, \ + .autodma = AUTODMA, \ + .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ + .bootable = ON_BOARD, \ + } + +static ide_pci_device_t piix_pci_info[] __devinitdata = { + /* 0 */ DECLARE_PIIX_DEV("PIIXa"), + /* 1 */ DECLARE_PIIX_DEV("PIIXb"), + + { /* 2 */ + .name = "MPIIX", + .init_hwif = init_hwif_piix, + .channels = 2, + .autodma = NODMA, + .enablebits = {{0x6D,0x80,0x80}, {0x6F,0x80,0x80}}, + .bootable = ON_BOARD, + }, + + /* 3 */ DECLARE_PIIX_DEV("PIIX3"), + /* 4 */ DECLARE_PIIX_DEV("PIIX4"), + /* 5 */ DECLARE_PIIX_DEV("ICH0"), + /* 6 */ DECLARE_PIIX_DEV("PIIX4"), + /* 7 */ DECLARE_PIIX_DEV("ICH"), + /* 8 */ DECLARE_PIIX_DEV("PIIX4"), + /* 9 */ DECLARE_PIIX_DEV("PIIX4"), + /* 10 */ DECLARE_PIIX_DEV("ICH2"), + /* 11 */ DECLARE_PIIX_DEV("ICH2M"), + /* 12 */ DECLARE_PIIX_DEV("ICH3M"), + /* 13 */ DECLARE_PIIX_DEV("ICH3"), + /* 14 */ DECLARE_PIIX_DEV("ICH4"), + /* 15 */ DECLARE_PIIX_DEV("ICH5"), + /* 16 */ DECLARE_PIIX_DEV("C-ICH"), + /* 17 */ DECLARE_PIIX_DEV("ICH4"), + /* 18 */ DECLARE_PIIX_DEV("ICH5-SATA"), + /* 19 */ DECLARE_PIIX_DEV("ICH5"), + /* 20 */ DECLARE_PIIX_DEV("ICH6"), + /* 21 */ DECLARE_PIIX_DEV("ICH7"), + /* 22 */ DECLARE_PIIX_DEV("ICH4"), +}; + +/** + * piix_init_one - called when a PIIX is found + * @dev: the piix device + * @id: the matching pci id + * + * Called when the PCI registration layer (or the IDE initialization) + * finds a device matching our IDE device tables. + */ + +static int __devinit piix_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ide_pci_device_t *d = &piix_pci_info[id->driver_data]; + + return ide_setup_pci_device(dev, d); +} + +/** + * piix_check_450nx - Check for problem 450NX setup + * + * Check for the present of 450NX errata #19 and errata #25. If + * they are found, disable use of DMA IDE + */ + +static void __devinit piix_check_450nx(void) +{ + struct pci_dev *pdev = NULL; + u16 cfg; + u8 rev; + while((pdev=pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL) + { + /* Look for 450NX PXB. Check for problem configurations + A PCI quirk checks bit 6 already */ + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); + pci_read_config_word(pdev, 0x41, &cfg); + /* Only on the original revision: IDE DMA can hang */ + if(rev == 0x00) + no_piix_dma = 1; + /* On all revisions below 5 PXB bus lock must be disabled for IDE */ + else if(cfg & (1<<14) && rev < 5) + no_piix_dma = 2; + } + if(no_piix_dma) + printk(KERN_WARNING "piix: 450NX errata present, disabling IDE DMA.\n"); + if(no_piix_dma == 2) + printk(KERN_WARNING "piix: A BIOS update may resolve this.\n"); +} + +static struct pci_device_id piix_pci_tbl[] = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371MX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82372FB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_11,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_11,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_11,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_11, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_10,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17}, +#ifdef CONFIG_BLK_DEV_IDE_SATA + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18}, +#endif + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_19, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 20}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 21}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 22}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, piix_pci_tbl); + +static struct pci_driver driver = { + .name = "PIIX_IDE", + .id_table = piix_pci_tbl, + .probe = piix_init_one, +}; + +static int __init piix_ide_init(void) +{ + piix_check_450nx(); + return ide_pci_register_driver(&driver); +} + +module_init(piix_ide_init); + +MODULE_AUTHOR("Andre Hedrick, Andrzej Krzysztofowicz"); +MODULE_DESCRIPTION("PCI driver module for Intel PIIX IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c new file mode 100644 index 0000000..608cd76 --- /dev/null +++ b/drivers/ide/pci/rz1000.c @@ -0,0 +1,91 @@ +/* + * linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003 + * + * Copyright (C) 1995-1998 Linus Torvalds & author (see below) + */ + +/* + * Principal Author: mlord@pobox.com (Mark Lord) + * + * See linux/MAINTAINERS for address of current maintainer. + * + * This file provides support for disabling the buggy read-ahead + * mode of the RZ1000 IDE chipset, commonly used on Intel motherboards. + * + * Dunno if this fixes both ports, or only the primary port (?). + */ + +#undef REALLY_SLOW_IO /* most systems can safely undef this */ + +#include <linux/config.h> /* for CONFIG_BLK_DEV_IDEPCI */ +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/pci.h> +#include <linux/ide.h> +#include <linux/init.h> + +#include <asm/io.h> + +static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif) +{ + u16 reg; + struct pci_dev *dev = hwif->pci_dev; + + hwif->chipset = ide_rz1000; + if (!pci_read_config_word (dev, 0x40, ®) && + !pci_write_config_word(dev, 0x40, reg & 0xdfff)) { + printk(KERN_INFO "%s: disabled chipset read-ahead " + "(buggy RZ1000/RZ1001)\n", hwif->name); + } else { + hwif->serialized = 1; + hwif->drives[0].no_unmask = 1; + hwif->drives[1].no_unmask = 1; + printk(KERN_INFO "%s: serialized, disabled unmasking " + "(buggy RZ1000/RZ1001)\n", hwif->name); + } +} + +static ide_pci_device_t rz1000_chipset __devinitdata = { + .name = "RZ100x", + .init_hwif = init_hwif_rz1000, + .channels = 2, + .autodma = NODMA, + .bootable = ON_BOARD, +}; + +static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &rz1000_chipset); +} + +static struct pci_device_id rz1000_pci_tbl[] = { + { PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl); + +static struct pci_driver driver = { + .name = "RZ1000_IDE", + .id_table = rz1000_pci_tbl, + .probe = rz1000_init_one, +}; + +static int rz1000_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(rz1000_ide_init); + +MODULE_AUTHOR("Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for RZ1000 IDE"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c new file mode 100644 index 0000000..84fda21 --- /dev/null +++ b/drivers/ide/pci/sc1200.c @@ -0,0 +1,518 @@ +/* + * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003 + * + * Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com> + * May be copied or modified under the terms of the GNU General Public License + * + * Development of this chipset driver was funded + * by the nice folks at National Semiconductor. + * + * Documentation: + * Available from National Semiconductor + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ide.h> +#include <linux/pm.h> +#include <asm/io.h> +#include <asm/irq.h> + +#define SC1200_REV_A 0x00 +#define SC1200_REV_B1 0x01 +#define SC1200_REV_B3 0x02 +#define SC1200_REV_C1 0x03 +#define SC1200_REV_D1 0x04 + +#define PCI_CLK_33 0x00 +#define PCI_CLK_48 0x01 +#define PCI_CLK_66 0x02 +#define PCI_CLK_33A 0x03 + +static unsigned short sc1200_get_pci_clock (void) +{ + unsigned char chip_id, silicon_revision; + unsigned int pci_clock; + /* + * Check the silicon revision, as not all versions of the chip + * have the register with the fast PCI bus timings. + */ + chip_id = inb (0x903c); + silicon_revision = inb (0x903d); + + // Read the fast pci clock frequency + if (chip_id == 0x04 && silicon_revision < SC1200_REV_B1) { + pci_clock = PCI_CLK_33; + } else { + // check clock generator configuration (cfcc) + // the clock is in bits 8 and 9 of this word + + pci_clock = inw (0x901e); + pci_clock >>= 8; + pci_clock &= 0x03; + if (pci_clock == PCI_CLK_33A) + pci_clock = PCI_CLK_33; + } + return pci_clock; +} + +extern char *ide_xfer_verbose (byte xfer_rate); + +/* + * Set a new transfer mode at the drive + */ +static int sc1200_set_xfer_mode (ide_drive_t *drive, byte mode) +{ + printk("%s: sc1200_set_xfer_mode(%s)\n", drive->name, ide_xfer_verbose(mode)); + return ide_config_drive_speed(drive, mode); +} + +/* + * Here are the standard PIO mode 0-4 timings for each "format". + * Format-0 uses fast data reg timings, with slower command reg timings. + * Format-1 uses fast timings for all registers, but won't work with all drives. + */ +static const unsigned int sc1200_pio_timings[4][5] = + {{0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz + {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz + {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz + {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131}}; // format1, 66Mhz + +/* + * After chip reset, the PIO timings are set to 0x00009172, which is not valid. + */ +//#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172) + +static int sc1200_autoselect_dma_mode (ide_drive_t *drive) +{ + int udma_ok = 1, mode = 0; + ide_hwif_t *hwif = HWIF(drive); + int unit = drive->select.b.unit; + ide_drive_t *mate = &hwif->drives[unit^1]; + struct hd_driveid *id = drive->id; + + /* + * The SC1200 specifies that two drives sharing a cable cannot + * mix UDMA/MDMA. It has to be one or the other, for the pair, + * though different timings can still be chosen for each drive. + * We could set the appropriate timing bits on the fly, + * but that might be a bit confusing. So, for now we statically + * handle this requirement by looking at our mate drive to see + * what it is capable of, before choosing a mode for our own drive. + */ + if (mate->present) { + struct hd_driveid *mateid = mate->id; + if (mateid && (mateid->capability & 1) && !__ide_dma_bad_drive(mate)) { + if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7)) + udma_ok = 1; + else if ((mateid->field_valid & 2) && (mateid->dma_mword & 7)) + udma_ok = 0; + else + udma_ok = 1; + } + } + /* + * Now see what the current drive is capable of, + * selecting UDMA only if the mate said it was ok. + */ + if (id && (id->capability & 1) && hwif->autodma && !__ide_dma_bad_drive(drive)) { + if (udma_ok && (id->field_valid & 4) && (id->dma_ultra & 7)) { + if (id->dma_ultra & 4) + mode = XFER_UDMA_2; + else if (id->dma_ultra & 2) + mode = XFER_UDMA_1; + else if (id->dma_ultra & 1) + mode = XFER_UDMA_0; + } + if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) { + if (id->dma_mword & 4) + mode = XFER_MW_DMA_2; + else if (id->dma_mword & 2) + mode = XFER_MW_DMA_1; + else if (id->dma_mword & 1) + mode = XFER_MW_DMA_0; + } + } + return mode; +} + +/* + * sc1200_config_dma2() handles selection/setting of DMA/UDMA modes + * for both the chipset and drive. + */ +static int sc1200_config_dma2 (ide_drive_t *drive, int mode) +{ + ide_hwif_t *hwif = HWIF(drive); + int unit = drive->select.b.unit; + unsigned int reg, timings; + unsigned short pci_clock; + unsigned int basereg = hwif->channel ? 0x50 : 0x40; + + /* + * Default to DMA-off in case we run into trouble here. + */ + hwif->ide_dma_off_quietly(drive); /* turn off DMA while we fiddle */ + outb(inb(hwif->dma_base+2)&~(unit?0x40:0x20), hwif->dma_base+2); /* clear DMA_capable bit */ + + /* + * Tell the drive to switch to the new mode; abort on failure. + */ + if (!mode || sc1200_set_xfer_mode(drive, mode)) { + printk("SC1200: set xfer mode failure\n"); + return 1; /* failure */ + } + + pci_clock = sc1200_get_pci_clock(); + + /* + * Now tune the chipset to match the drive: + * + * Note that each DMA mode has several timings associated with it. + * The correct timing depends on the fast PCI clock freq. + */ + timings = 0; + switch (mode) { + case XFER_UDMA_0: + switch (pci_clock) { + case PCI_CLK_33: timings = 0x00921250; break; + case PCI_CLK_48: timings = 0x00932470; break; + case PCI_CLK_66: timings = 0x009436a1; break; + } + break; + case XFER_UDMA_1: + switch (pci_clock) { + case PCI_CLK_33: timings = 0x00911140; break; + case PCI_CLK_48: timings = 0x00922260; break; + case PCI_CLK_66: timings = 0x00933481; break; + } + break; + case XFER_UDMA_2: + switch (pci_clock) { + case PCI_CLK_33: timings = 0x00911030; break; + case PCI_CLK_48: timings = 0x00922140; break; + case PCI_CLK_66: timings = 0x00923261; break; + } + break; + case XFER_MW_DMA_0: + switch (pci_clock) { + case PCI_CLK_33: timings = 0x00077771; break; + case PCI_CLK_48: timings = 0x000bbbb2; break; + case PCI_CLK_66: timings = 0x000ffff3; break; + } + break; + case XFER_MW_DMA_1: + switch (pci_clock) { + case PCI_CLK_33: timings = 0x00012121; break; + case PCI_CLK_48: timings = 0x00024241; break; + case PCI_CLK_66: timings = 0x00035352; break; + } + break; + case XFER_MW_DMA_2: + switch (pci_clock) { + case PCI_CLK_33: timings = 0x00002020; break; + case PCI_CLK_48: timings = 0x00013131; break; + case PCI_CLK_66: timings = 0x00015151; break; + } + break; + } + + if (timings == 0) { + printk("%s: sc1200_config_dma: huh? mode=%02x clk=%x \n", drive->name, mode, pci_clock); + return 1; /* failure */ + } + + if (unit == 0) { /* are we configuring drive0? */ + pci_read_config_dword(hwif->pci_dev, basereg+4, ®); + timings |= reg & 0x80000000; /* preserve PIO format bit */ + pci_write_config_dword(hwif->pci_dev, basereg+4, timings); + } else { + pci_write_config_dword(hwif->pci_dev, basereg+12, timings); + } + + outb(inb(hwif->dma_base+2)|(unit?0x40:0x20), hwif->dma_base+2); /* set DMA_capable bit */ + + /* + * Finally, turn DMA on in software, and exit. + */ + return hwif->ide_dma_on(drive); /* success */ +} + +/* + * sc1200_config_dma() handles selection/setting of DMA/UDMA modes + * for both the chipset and drive. + */ +static int sc1200_config_dma (ide_drive_t *drive) +{ + return sc1200_config_dma2(drive, sc1200_autoselect_dma_mode(drive)); +} + + +/* Replacement for the standard ide_dma_end action in + * dma_proc. + * + * returns 1 on error, 0 otherwise + */ +static int sc1200_ide_dma_end (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned long dma_base = hwif->dma_base; + byte dma_stat; + + dma_stat = inb(dma_base+2); /* get DMA status */ + + if (!(dma_stat & 4)) + printk(" ide_dma_end dma_stat=%0x err=%x newerr=%x\n", + dma_stat, ((dma_stat&7)!=4), ((dma_stat&2)==2)); + + outb(dma_stat|0x1b, dma_base+2); /* clear the INTR & ERROR bits */ + outb(inb(dma_base)&~1, dma_base); /* !! DO THIS HERE !! stop DMA */ + + drive->waiting_for_dma = 0; + ide_destroy_dmatable(drive); /* purge DMA mappings */ + + return (dma_stat & 7) != 4; /* verify good DMA status */ +} + +/* + * sc1200_tuneproc() handles selection/setting of PIO modes + * for both the chipset and drive. + * + * All existing BIOSs for this chipset guarantee that all drives + * will have valid default PIO timings set up before we get here. + */ +static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "autotune" */ +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned int format; + static byte modes[5] = {XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4}; + int mode = -1; + + switch (pio) { + case 200: mode = XFER_UDMA_0; break; + case 201: mode = XFER_UDMA_1; break; + case 202: mode = XFER_UDMA_2; break; + case 100: mode = XFER_MW_DMA_0; break; + case 101: mode = XFER_MW_DMA_1; break; + case 102: mode = XFER_MW_DMA_2; break; + } + if (mode != -1) { + printk("SC1200: %s: changing (U)DMA mode\n", drive->name); + (void)sc1200_config_dma2(drive, mode); + return; + } + + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio); + if (!sc1200_set_xfer_mode(drive, modes[pio])) { + unsigned int basereg = hwif->channel ? 0x50 : 0x40; + pci_read_config_dword (hwif->pci_dev, basereg+4, &format); + format = (format >> 31) & 1; + if (format) + format += sc1200_get_pci_clock(); + pci_write_config_dword(hwif->pci_dev, basereg + (drive->select.b.unit << 3), sc1200_pio_timings[format][pio]); + } +} + +static ide_hwif_t *lookup_pci_dev (ide_hwif_t *prev, struct pci_dev *dev) +{ + int h; + + for (h = 0; h < MAX_HWIFS; h++) { + ide_hwif_t *hwif = &ide_hwifs[h]; + if (prev) { + if (hwif == prev) + prev = NULL; // found previous, now look for next match + } else { + if (hwif && hwif->pci_dev == dev) + return hwif; // found next match + } + } + return NULL; // not found +} + +typedef struct sc1200_saved_state_s { + __u32 regs[4]; +} sc1200_saved_state_t; + + +static int sc1200_suspend (struct pci_dev *dev, u32 state) +{ + ide_hwif_t *hwif = NULL; + + printk("SC1200: suspend(%u)\n", state); + + if (state == 0) { + // we only save state when going from full power to less + + // + // Loop over all interfaces that are part of this PCI device: + // + while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) { + sc1200_saved_state_t *ss; + unsigned int basereg, r; + // + // allocate a permanent save area, if not already allocated + // + ss = (sc1200_saved_state_t *)hwif->config_data; + if (ss == NULL) { + ss = kmalloc(sizeof(sc1200_saved_state_t), GFP_KERNEL); + if (ss == NULL) + return -ENOMEM; + hwif->config_data = (unsigned long)ss; + } + ss = (sc1200_saved_state_t *)hwif->config_data; + // + // Save timing registers: this may be unnecessary if + // BIOS also does it + // + basereg = hwif->channel ? 0x50 : 0x40; + for (r = 0; r < 4; ++r) { + pci_read_config_dword (hwif->pci_dev, basereg + (r<<2), &ss->regs[r]); + } + } + } + + /* You don't need to iterate over disks -- sysfs should have done that for you already */ + + pci_disable_device(dev); + pci_set_power_state(dev,state); + dev->current_state = state; + return 0; +} + +static int sc1200_resume (struct pci_dev *dev) +{ + ide_hwif_t *hwif = NULL; + +printk("SC1200: resume\n"); + pci_set_power_state(dev,0); // bring chip back from sleep state + dev->current_state = 0; + pci_enable_device(dev); + // + // loop over all interfaces that are part of this pci device: + // + while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) { + unsigned int basereg, r, d, format; + sc1200_saved_state_t *ss = (sc1200_saved_state_t *)hwif->config_data; +printk("%s: SC1200: resume\n", hwif->name); + + // + // Restore timing registers: this may be unnecessary if BIOS also does it + // + basereg = hwif->channel ? 0x50 : 0x40; + if (ss != NULL) { + for (r = 0; r < 4; ++r) { + pci_write_config_dword(hwif->pci_dev, basereg + (r<<2), ss->regs[r]); + } + } + // + // Re-program drive PIO modes + // + pci_read_config_dword(hwif->pci_dev, basereg+4, &format); + format = (format >> 31) & 1; + if (format) + format += sc1200_get_pci_clock(); + for (d = 0; d < 2; ++d) { + ide_drive_t *drive = &(hwif->drives[d]); + if (drive->present) { + unsigned int pio, timings; + pci_read_config_dword(hwif->pci_dev, basereg+(drive->select.b.unit << 3), &timings); + for (pio = 0; pio <= 4; ++pio) { + if (sc1200_pio_timings[format][pio] == timings) + break; + } + if (pio > 4) + pio = 255; /* autotune */ + (void)sc1200_tuneproc(drive, pio); + } + } + // + // Re-program drive DMA modes + // + for (d = 0; d < MAX_DRIVES; ++d) { + ide_drive_t *drive = &(hwif->drives[d]); + if (drive->present && !__ide_dma_bad_drive(drive)) { + int was_using_dma = drive->using_dma; + hwif->ide_dma_off_quietly(drive); + sc1200_config_dma(drive); + if (!was_using_dma && drive->using_dma) { + hwif->ide_dma_off_quietly(drive); + } + } + } + } + return 0; +} + +/* + * This gets invoked by the IDE driver once for each channel, + * and performs channel-specific pre-initialization before drive probing. + */ +static void __init init_hwif_sc1200 (ide_hwif_t *hwif) +{ + if (hwif->mate) + hwif->serialized = hwif->mate->serialized = 1; + hwif->autodma = 0; + if (hwif->dma_base) { + hwif->ide_dma_check = &sc1200_config_dma; + hwif->ide_dma_end = &sc1200_ide_dma_end; + if (!noautodma) + hwif->autodma = 1; + hwif->tuneproc = &sc1200_tuneproc; + } + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x07; + hwif->mwdma_mask = 0x07; + + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +static ide_pci_device_t sc1200_chipset __devinitdata = { + .name = "SC1200", + .init_hwif = init_hwif_sc1200, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, +}; + +static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &sc1200_chipset); +} + +static struct pci_device_id sc1200_pci_tbl[] = { + { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, sc1200_pci_tbl); + +static struct pci_driver driver = { + .name = "SC1200_IDE", + .id_table = sc1200_pci_tbl, + .probe = sc1200_init_one, + .suspend = sc1200_suspend, + .resume = sc1200_resume, +}; + +static int sc1200_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(sc1200_ide_init); + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("PCI driver module for NS SC1200 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c new file mode 100644 index 0000000..82a1103 --- /dev/null +++ b/drivers/ide/pci/serverworks.c @@ -0,0 +1,675 @@ +/* + * linux/drivers/ide/pci/serverworks.c Version 0.8 25 Ebr 2003 + * + * Copyright (C) 1998-2000 Michel Aubry + * Copyright (C) 1998-2000 Andrzej Krzysztofowicz + * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> + * Portions copyright (c) 2001 Sun Microsystems + * + * + * RCC/ServerWorks IDE driver for Linux + * + * OSB4: `Open South Bridge' IDE Interface (fn 1) + * supports UDMA mode 2 (33 MB/s) + * + * CSB5: `Champion South Bridge' IDE Interface (fn 1) + * all revisions support UDMA mode 4 (66 MB/s) + * revision A2.0 and up support UDMA mode 5 (100 MB/s) + * + * *** The CSB5 does not provide ANY register *** + * *** to detect 80-conductor cable presence. *** + * + * CSB6: `Champion South Bridge' IDE Interface (optional: third channel) + * + * Documentation: + * Available under NDA only. Errata info very hard to get. + * + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/init.h> +#include <linux/delay.h> + +#include <asm/io.h> + +#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */ +#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */ + +/* Seagate Barracuda ATA IV Family drives in UDMA mode 5 + * can overrun their FIFOs when used with the CSB5 */ +static const char *svwks_bad_ata100[] = { + "ST320011A", + "ST340016A", + "ST360021A", + "ST380021A", + NULL +}; + +static u8 svwks_revision = 0; +static struct pci_dev *isa_dev; + +static int check_in_drive_lists (ide_drive_t *drive, const char **list) +{ + while (*list) + if (!strcmp(*list++, drive->id->model)) + return 1; + return 0; +} + +static u8 svwks_ratemask (ide_drive_t *drive) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + u8 mode; + + if (!svwks_revision) + pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); + + if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { + u32 reg = 0; + if (isa_dev) + pci_read_config_dword(isa_dev, 0x64, ®); + + /* + * Don't enable UDMA on disk devices for the moment + */ + if(drive->media == ide_disk) + return 0; + /* Check the OSB4 DMA33 enable bit */ + return ((reg & 0x00004000) == 0x00004000) ? 1 : 0; + } else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) { + return 1; + } else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) { + u8 btr = 0; + pci_read_config_byte(dev, 0x5A, &btr); + mode = btr & 0x3; + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + /* If someone decides to do UDMA133 on CSB5 the same + issue will bite so be inclusive */ + if (mode > 2 && check_in_drive_lists(drive, svwks_bad_ata100)) + mode = 2; + } + if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || + (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) && + (!(PCI_FUNC(dev->devfn) & 1))) + mode = 2; + return mode; +} + +static u8 svwks_csb_check (struct pci_dev *dev) +{ + switch (dev->device) { + case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: + case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE: + case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2: + return 1; + default: + break; + } + return 0; +} +static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 }; + u8 dma_modes[] = { 0x77, 0x21, 0x20 }; + u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; + u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 }; + u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 }; + + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 speed; + u8 pio = ide_get_best_pio_mode(drive, 255, 5, NULL); + u8 unit = (drive->select.b.unit & 0x01); + u8 csb5 = svwks_csb_check(dev); + u8 ultra_enable = 0, ultra_timing = 0; + u8 dma_timing = 0, pio_timing = 0; + u16 csb5_pio = 0; + + if (xferspeed == 255) /* PIO auto-tuning */ + speed = XFER_PIO_0 + pio; + else + speed = ide_rate_filter(svwks_ratemask(drive), xferspeed); + + /* If we are about to put a disk into UDMA mode we screwed up. + Our code assumes we never _ever_ do this on an OSB4 */ + + if(dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4 && + drive->media == ide_disk && speed >= XFER_UDMA_0) + BUG(); + + pci_read_config_byte(dev, drive_pci[drive->dn], &pio_timing); + pci_read_config_byte(dev, drive_pci2[drive->dn], &dma_timing); + pci_read_config_byte(dev, (0x56|hwif->channel), &ultra_timing); + pci_read_config_word(dev, 0x4A, &csb5_pio); + pci_read_config_byte(dev, 0x54, &ultra_enable); + + /* Per Specified Design by OEM, and ASIC Architect */ + if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || + (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) { + if (!drive->init_speed) { + u8 dma_stat = hwif->INB(hwif->dma_status); + +dma_pio: + if (((ultra_enable << (7-drive->dn) & 0x80) == 0x80) && + ((dma_stat & (1<<(5+unit))) == (1<<(5+unit)))) { + drive->current_speed = drive->init_speed = XFER_UDMA_0 + udma_modes[(ultra_timing >> (4*unit)) & ~(0xF0)]; + return 0; + } else if ((dma_timing) && + ((dma_stat&(1<<(5+unit)))==(1<<(5+unit)))) { + u8 dmaspeed = dma_timing; + + dma_timing &= ~0xFF; + if ((dmaspeed & 0x20) == 0x20) + dmaspeed = XFER_MW_DMA_2; + else if ((dmaspeed & 0x21) == 0x21) + dmaspeed = XFER_MW_DMA_1; + else if ((dmaspeed & 0x77) == 0x77) + dmaspeed = XFER_MW_DMA_0; + else + goto dma_pio; + drive->current_speed = drive->init_speed = dmaspeed; + return 0; + } else if (pio_timing) { + u8 piospeed = pio_timing; + + pio_timing &= ~0xFF; + if ((piospeed & 0x20) == 0x20) + piospeed = XFER_PIO_4; + else if ((piospeed & 0x22) == 0x22) + piospeed = XFER_PIO_3; + else if ((piospeed & 0x34) == 0x34) + piospeed = XFER_PIO_2; + else if ((piospeed & 0x47) == 0x47) + piospeed = XFER_PIO_1; + else if ((piospeed & 0x5d) == 0x5d) + piospeed = XFER_PIO_0; + else + goto oem_setup_failed; + drive->current_speed = drive->init_speed = piospeed; + return 0; + } + } + } + +oem_setup_failed: + + pio_timing &= ~0xFF; + dma_timing &= ~0xFF; + ultra_timing &= ~(0x0F << (4*unit)); + ultra_enable &= ~(0x01 << drive->dn); + csb5_pio &= ~(0x0F << (4*drive->dn)); + + switch(speed) { + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: + case XFER_PIO_0: + pio_timing |= pio_modes[speed - XFER_PIO_0]; + csb5_pio |= ((speed - XFER_PIO_0) << (4*drive->dn)); + break; + + case XFER_MW_DMA_2: + case XFER_MW_DMA_1: + case XFER_MW_DMA_0: + pio_timing |= pio_modes[pio]; + csb5_pio |= (pio << (4*drive->dn)); + dma_timing |= dma_modes[speed - XFER_MW_DMA_0]; + break; + + case XFER_UDMA_5: + case XFER_UDMA_4: + case XFER_UDMA_3: + case XFER_UDMA_2: + case XFER_UDMA_1: + case XFER_UDMA_0: + pio_timing |= pio_modes[pio]; + csb5_pio |= (pio << (4*drive->dn)); + dma_timing |= dma_modes[2]; + ultra_timing |= ((udma_modes[speed - XFER_UDMA_0]) << (4*unit)); + ultra_enable |= (0x01 << drive->dn); + default: + break; + } + + pci_write_config_byte(dev, drive_pci[drive->dn], pio_timing); + if (csb5) + pci_write_config_word(dev, 0x4A, csb5_pio); + + pci_write_config_byte(dev, drive_pci2[drive->dn], dma_timing); + pci_write_config_byte(dev, (0x56|hwif->channel), ultra_timing); + pci_write_config_byte(dev, 0x54, ultra_enable); + + return (ide_config_drive_speed(drive, speed)); +} + +static void config_chipset_for_pio (ide_drive_t *drive) +{ + u16 eide_pio_timing[6] = {960, 480, 240, 180, 120, 90}; + u16 xfer_pio = drive->id->eide_pio_modes; + u8 timing, speed, pio; + + pio = ide_get_best_pio_mode(drive, 255, 5, NULL); + + if (xfer_pio > 4) + xfer_pio = 0; + + if (drive->id->eide_pio_iordy > 0) + for (xfer_pio = 5; + xfer_pio>0 && + drive->id->eide_pio_iordy>eide_pio_timing[xfer_pio]; + xfer_pio--); + else + xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 : + (drive->id->eide_pio_modes & 2) ? 0x04 : + (drive->id->eide_pio_modes & 1) ? 0x03 : + (drive->id->tPIO & 2) ? 0x02 : + (drive->id->tPIO & 1) ? 0x01 : xfer_pio; + + timing = (xfer_pio >= pio) ? xfer_pio : pio; + + switch(timing) { + case 4: speed = XFER_PIO_4;break; + case 3: speed = XFER_PIO_3;break; + case 2: speed = XFER_PIO_2;break; + case 1: speed = XFER_PIO_1;break; + default: + speed = (!drive->id->tPIO) ? XFER_PIO_0 : XFER_PIO_SLOW; + break; + } + (void) svwks_tune_chipset(drive, speed); + drive->current_speed = speed; +} + +static void svwks_tune_drive (ide_drive_t *drive, u8 pio) +{ + if(pio == 255) + (void) svwks_tune_chipset(drive, 255); + else + (void) svwks_tune_chipset(drive, (XFER_PIO_0 + pio)); +} + +static int config_chipset_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, svwks_ratemask(drive)); + + if (!(speed)) + speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); + + (void) svwks_tune_chipset(drive, speed); + return ide_dma_enable(drive); +} + +static int svwks_config_drive_xfer_rate (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + drive->init_speed = 0; + + if ((id->capability & 1) && drive->autodma) { + + if (ide_use_dma(drive)) { + if (config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + config_chipset_for_pio(drive); + // hwif->tuneproc(drive, 5); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +/* This can go soon */ + +static int svwks_ide_dma_end (ide_drive_t *drive) +{ + return __ide_dma_end(drive); +} + +static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const char *name) +{ + unsigned int reg; + u8 btr; + + /* save revision id to determine DMA capability */ + pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); + + /* force Master Latency Timer value to 64 PCICLKs */ + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40); + + /* OSB4 : South Bridge and IDE */ + if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { + isa_dev = pci_find_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL); + if (isa_dev) { + pci_read_config_dword(isa_dev, 0x64, ®); + reg &= ~0x00002000; /* disable 600ns interrupt mask */ + if(!(reg & 0x00004000)) + printk(KERN_DEBUG "%s: UDMA not BIOS enabled.\n", name); + reg |= 0x00004000; /* enable UDMA/33 support */ + pci_write_config_dword(isa_dev, 0x64, reg); + } + } + + /* setup CSB5/CSB6 : South Bridge and IDE option RAID */ + else if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) || + (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || + (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) { + + /* Third Channel Test */ + if (!(PCI_FUNC(dev->devfn) & 1)) { + struct pci_dev * findev = NULL; + u32 reg4c = 0; + findev = pci_find_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_CSB5, NULL); + if (findev) { + pci_read_config_dword(findev, 0x4C, ®4c); + reg4c &= ~0x000007FF; + reg4c |= 0x00000040; + reg4c |= 0x00000020; + pci_write_config_dword(findev, 0x4C, reg4c); + } + outb_p(0x06, 0x0c00); + dev->irq = inb_p(0x0c01); +#if 0 + printk("%s: device class (0x%04x)\n", + name, dev->class); + if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) { + dev->class &= ~0x000F0F00; + // dev->class |= ~0x00000400; + dev->class |= ~0x00010100; + /**/ + } +#endif + } else { + struct pci_dev * findev = NULL; + u8 reg41 = 0; + + findev = pci_find_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_CSB6, NULL); + if (findev) { + pci_read_config_byte(findev, 0x41, ®41); + reg41 &= ~0x40; + pci_write_config_byte(findev, 0x41, reg41); + } + /* + * This is a device pin issue on CSB6. + * Since there will be a future raid mode, + * early versions of the chipset require the + * interrupt pin to be set, and it is a compatibility + * mode issue. + */ + if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) + dev->irq = 0; + } +// pci_read_config_dword(dev, 0x40, &pioreg) +// pci_write_config_dword(dev, 0x40, 0x99999999); +// pci_read_config_dword(dev, 0x44, &dmareg); +// pci_write_config_dword(dev, 0x44, 0xFFFFFFFF); + /* setup the UDMA Control register + * + * 1. clear bit 6 to enable DMA + * 2. enable DMA modes with bits 0-1 + * 00 : legacy + * 01 : udma2 + * 10 : udma2/udma4 + * 11 : udma2/udma4/udma5 + */ + pci_read_config_byte(dev, 0x5A, &btr); + btr &= ~0x40; + if (!(PCI_FUNC(dev->devfn) & 1)) + btr |= 0x2; + else + btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; + pci_write_config_byte(dev, 0x5A, btr); + } + + return (dev->irq) ? dev->irq : 0; +} + +static unsigned int __init ata66_svwks_svwks (ide_hwif_t *hwif) +{ + return 1; +} + +/* On Dell PowerEdge servers with a CSB5/CSB6, the top two bits + * of the subsystem device ID indicate presence of an 80-pin cable. + * Bit 15 clear = secondary IDE channel does not have 80-pin cable. + * Bit 15 set = secondary IDE channel has 80-pin cable. + * Bit 14 clear = primary IDE channel does not have 80-pin cable. + * Bit 14 set = primary IDE channel has 80-pin cable. + */ +static unsigned int __init ata66_svwks_dell (ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL && + dev->vendor == PCI_VENDOR_ID_SERVERWORKS && + (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE || + dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE)) + return ((1 << (hwif->channel + 14)) & + dev->subsystem_device) ? 1 : 0; + return 0; +} + +/* Sun Cobalt Alpine hardware avoids the 80-pin cable + * detect issue by attaching the drives directly to the board. + * This check follows the Dell precedent (how scary is that?!) + * + * WARNING: this only works on Alpine hardware! + */ +static unsigned int __init ata66_svwks_cobalt (ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN && + dev->vendor == PCI_VENDOR_ID_SERVERWORKS && + dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) + return ((1 << (hwif->channel + 14)) & + dev->subsystem_device) ? 1 : 0; + return 0; +} + +static unsigned int __init ata66_svwks (ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + + /* Per Specified Design by OEM, and ASIC Architect */ + if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || + (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) + return 1; + + /* Server Works */ + if (dev->subsystem_vendor == PCI_VENDOR_ID_SERVERWORKS) + return ata66_svwks_svwks (hwif); + + /* Dell PowerEdge */ + if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL) + return ata66_svwks_dell (hwif); + + /* Cobalt Alpine */ + if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN) + return ata66_svwks_cobalt (hwif); + + return 0; +} + +#undef CAN_SW_DMA +static void __devinit init_hwif_svwks (ide_hwif_t *hwif) +{ + u8 dma_stat = 0; + + if (!hwif->irq) + hwif->irq = hwif->channel ? 15 : 14; + + hwif->tuneproc = &svwks_tune_drive; + hwif->speedproc = &svwks_tune_chipset; + + hwif->atapi_dma = 1; + + if (hwif->pci_dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) + hwif->ultra_mask = 0x3f; + + hwif->mwdma_mask = 0x07; +#ifdef CAN_SW_DMA + hwif->swdma_mask = 0x07; +#endif /* CAN_SW_DMA */ + + hwif->autodma = 0; + + if (!hwif->dma_base) { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + return; + } + + hwif->ide_dma_check = &svwks_config_drive_xfer_rate; + if (hwif->pci_dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) + hwif->ide_dma_end = &svwks_ide_dma_end; + else if (!(hwif->udma_four)) + hwif->udma_four = ata66_svwks(hwif); + if (!noautodma) + hwif->autodma = 1; + + dma_stat = hwif->INB(hwif->dma_status); + hwif->drives[0].autodma = (dma_stat & 0x20); + hwif->drives[1].autodma = (dma_stat & 0x40); + hwif->drives[0].autotune = (!(dma_stat & 0x20)); + hwif->drives[1].autotune = (!(dma_stat & 0x40)); +// hwif->drives[0].autodma = hwif->autodma; +// hwif->drives[1].autodma = hwif->autodma; +} + +/* + * We allow the BM-DMA driver to only work on enabled interfaces. + */ +static void __devinit init_dma_svwks (ide_hwif_t *hwif, unsigned long dmabase) +{ + struct pci_dev *dev = hwif->pci_dev; + + if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || + (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) && + (!(PCI_FUNC(dev->devfn) & 1)) && (hwif->channel)) + return; + + ide_setup_dma(hwif, dmabase, 8); +} + +static int __devinit init_setup_svwks (struct pci_dev *dev, ide_pci_device_t *d) +{ + return ide_setup_pci_device(dev, d); +} + +static int __init init_setup_csb6 (struct pci_dev *dev, ide_pci_device_t *d) +{ + if (!(PCI_FUNC(dev->devfn) & 1)) { + d->bootable = NEVER_BOARD; + if (dev->resource[0].start == 0x01f1) + d->bootable = ON_BOARD; + } +#if 0 + if ((IDE_PCI_DEVID_EQ(d->devid, DEVID_CSB6) && + (!(PCI_FUNC(dev->devfn) & 1))) + d->autodma = AUTODMA; +#endif + + d->channels = ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE || + dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2) && + (!(PCI_FUNC(dev->devfn) & 1))) ? 1 : 2; + + return ide_setup_pci_device(dev, d); +} + +static ide_pci_device_t serverworks_chipsets[] __devinitdata = { + { /* 0 */ + .name = "SvrWks OSB4", + .init_setup = init_setup_svwks, + .init_chipset = init_chipset_svwks, + .init_hwif = init_hwif_svwks, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, + },{ /* 1 */ + .name = "SvrWks CSB5", + .init_setup = init_setup_svwks, + .init_chipset = init_chipset_svwks, + .init_hwif = init_hwif_svwks, + .init_dma = init_dma_svwks, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, + },{ /* 2 */ + .name = "SvrWks CSB6", + .init_setup = init_setup_csb6, + .init_chipset = init_chipset_svwks, + .init_hwif = init_hwif_svwks, + .init_dma = init_dma_svwks, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, + },{ /* 3 */ + .name = "SvrWks CSB6", + .init_setup = init_setup_csb6, + .init_chipset = init_chipset_svwks, + .init_hwif = init_hwif_svwks, + .init_dma = init_dma_svwks, + .channels = 1, /* 2 */ + .autodma = AUTODMA, + .bootable = ON_BOARD, + } +}; + +/** + * svwks_init_one - called when a OSB/CSB is found + * @dev: the svwks device + * @id: the matching pci id + * + * Called when the PCI registration layer (or the IDE initialization) + * finds a device matching our IDE device tables. + */ + +static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ide_pci_device_t *d = &serverworks_chipsets[id->driver_data]; + + return d->init_setup(dev, d); +} + +static struct pci_device_id svwks_pci_tbl[] = { + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, svwks_pci_tbl); + +static struct pci_driver driver = { + .name = "Serverworks_IDE", + .id_table = svwks_pci_tbl, + .probe = svwks_init_one, +}; + +static int svwks_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(svwks_ide_init); + +MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c new file mode 100644 index 0000000..4651a22 --- /dev/null +++ b/drivers/ide/pci/sgiioc4.c @@ -0,0 +1,728 @@ +/* + * Copyright (c) 2003 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Contact information: Silicon Graphics, Inc., 1600 Amphitheatre Pkwy, + * Mountain View, CA 94043, or: + * + * http://www.sgi.com + * + * For further information regarding this notice, see: + * + * http://oss.sgi.com/projects/GenInfo/NoticeExplan + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/hdreg.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/ioc4_common.h> +#include <asm/io.h> + +#include <linux/ide.h> + +/* IOC4 Specific Definitions */ +#define IOC4_CMD_OFFSET 0x100 +#define IOC4_CTRL_OFFSET 0x120 +#define IOC4_DMA_OFFSET 0x140 +#define IOC4_INTR_OFFSET 0x0 + +#define IOC4_TIMING 0x00 +#define IOC4_DMA_PTR_L 0x01 +#define IOC4_DMA_PTR_H 0x02 +#define IOC4_DMA_ADDR_L 0x03 +#define IOC4_DMA_ADDR_H 0x04 +#define IOC4_BC_DEV 0x05 +#define IOC4_BC_MEM 0x06 +#define IOC4_DMA_CTRL 0x07 +#define IOC4_DMA_END_ADDR 0x08 + +/* Bits in the IOC4 Control/Status Register */ +#define IOC4_S_DMA_START 0x01 +#define IOC4_S_DMA_STOP 0x02 +#define IOC4_S_DMA_DIR 0x04 +#define IOC4_S_DMA_ACTIVE 0x08 +#define IOC4_S_DMA_ERROR 0x10 +#define IOC4_ATA_MEMERR 0x02 + +/* Read/Write Directions */ +#define IOC4_DMA_WRITE 0x04 +#define IOC4_DMA_READ 0x00 + +/* Interrupt Register Offsets */ +#define IOC4_INTR_REG 0x03 +#define IOC4_INTR_SET 0x05 +#define IOC4_INTR_CLEAR 0x07 + +#define IOC4_IDE_CACHELINE_SIZE 128 +#define IOC4_CMD_CTL_BLK_SIZE 0x20 +#define IOC4_SUPPORTED_FIRMWARE_REV 46 + +typedef struct { + u32 timing_reg0; + u32 timing_reg1; + u32 low_mem_ptr; + u32 high_mem_ptr; + u32 low_mem_addr; + u32 high_mem_addr; + u32 dev_byte_count; + u32 mem_byte_count; + u32 status; +} ioc4_dma_regs_t; + +/* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */ +/* IOC4 has only 1 IDE channel */ +#define IOC4_PRD_BYTES 16 +#define IOC4_PRD_ENTRIES (PAGE_SIZE /(4*IOC4_PRD_BYTES)) + + +static void +sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, + unsigned long ctrl_port, unsigned long irq_port) +{ + unsigned long reg = data_port; + int i; + + /* Registers are word (32 bit) aligned */ + for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) + hw->io_ports[i] = reg + i * 4; + + if (ctrl_port) + hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port; + + if (irq_port) + hw->io_ports[IDE_IRQ_OFFSET] = irq_port; +} + +static void +sgiioc4_maskproc(ide_drive_t * drive, int mask) +{ + ide_hwif_t *hwif = HWIF(drive); + hwif->OUTB(mask ? (drive->ctl | 2) : (drive->ctl & ~2), + IDE_CONTROL_REG); +} + + +static int +sgiioc4_checkirq(ide_hwif_t * hwif) +{ + u8 intr_reg = + hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET] + IOC4_INTR_REG * 4); + + if (intr_reg & 0x03) + return 1; + + return 0; +} + + +static int +sgiioc4_clearirq(ide_drive_t * drive) +{ + u32 intr_reg; + ide_hwif_t *hwif = HWIF(drive); + unsigned long other_ir = + hwif->io_ports[IDE_IRQ_OFFSET] + (IOC4_INTR_REG << 2); + + /* Code to check for PCI error conditions */ + intr_reg = hwif->INL(other_ir); + if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */ + /* + * Using hwif->INB to read the IDE_STATUS_REG has a side effect + * of clearing the interrupt. The first read should clear it + * if it is set. The second read should return a "clear" status + * if it got cleared. If not, then spin for a bit trying to + * clear it. + */ + u8 stat = hwif->INB(IDE_STATUS_REG); + int count = 0; + stat = hwif->INB(IDE_STATUS_REG); + while ((stat & 0x80) && (count++ < 100)) { + udelay(1); + stat = hwif->INB(IDE_STATUS_REG); + } + + if (intr_reg & 0x02) { + /* Error when transferring DMA data on PCI bus */ + u32 pci_err_addr_low, pci_err_addr_high, + pci_stat_cmd_reg; + + pci_err_addr_low = + hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET]); + pci_err_addr_high = + hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET] + 4); + pci_read_config_dword(hwif->pci_dev, PCI_COMMAND, + &pci_stat_cmd_reg); + printk(KERN_ERR + "%s(%s) : PCI Bus Error when doing DMA:" + " status-cmd reg is 0x%x\n", + __FUNCTION__, drive->name, pci_stat_cmd_reg); + printk(KERN_ERR + "%s(%s) : PCI Error Address is 0x%x%x\n", + __FUNCTION__, drive->name, + pci_err_addr_high, pci_err_addr_low); + /* Clear the PCI Error indicator */ + pci_write_config_dword(hwif->pci_dev, PCI_COMMAND, + 0x00000146); + } + + /* Clear the Interrupt, Error bits on the IOC4 */ + hwif->OUTL(0x03, other_ir); + + intr_reg = hwif->INL(other_ir); + } + + return intr_reg & 3; +} + +static void sgiioc4_ide_dma_start(ide_drive_t * drive) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned int reg = hwif->INL(hwif->dma_base + IOC4_DMA_CTRL * 4); + unsigned int temp_reg = reg | IOC4_S_DMA_START; + + hwif->OUTL(temp_reg, hwif->dma_base + IOC4_DMA_CTRL * 4); +} + +static u32 +sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base) +{ + u32 ioc4_dma; + int count; + + count = 0; + ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4); + while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) { + udelay(1); + ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4); + } + return ioc4_dma; +} + +/* Stops the IOC4 DMA Engine */ +static int +sgiioc4_ide_dma_end(ide_drive_t * drive) +{ + u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0; + ide_hwif_t *hwif = HWIF(drive); + u64 dma_base = hwif->dma_base; + int dma_stat = 0; + unsigned long *ending_dma = (unsigned long *) hwif->dma_base2; + + hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4); + + ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); + + if (ioc4_dma & IOC4_S_DMA_STOP) { + printk(KERN_ERR + "%s(%s): IOC4 DMA STOP bit is still 1 :" + "ioc4_dma_reg 0x%x\n", + __FUNCTION__, drive->name, ioc4_dma); + dma_stat = 1; + } + + /* + * The IOC4 will DMA 1's to the ending dma area to indicate that + * previous data DMA is complete. This is necessary because of relaxed + * ordering between register reads and DMA writes on the Altix. + */ + while ((cnt++ < 200) && (!valid)) { + for (num = 0; num < 16; num++) { + if (ending_dma[num]) { + valid = 1; + break; + } + } + udelay(1); + } + if (!valid) { + printk(KERN_ERR "%s(%s) : DMA incomplete\n", __FUNCTION__, + drive->name); + dma_stat = 1; + } + + bc_dev = hwif->INL(dma_base + IOC4_BC_DEV * 4); + bc_mem = hwif->INL(dma_base + IOC4_BC_MEM * 4); + + if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) { + if (bc_dev > bc_mem + 8) { + printk(KERN_ERR + "%s(%s): WARNING!! byte_count_dev %d " + "!= byte_count_mem %d\n", + __FUNCTION__, drive->name, bc_dev, bc_mem); + } + } + + drive->waiting_for_dma = 0; + ide_destroy_dmatable(drive); + + return dma_stat; +} + +static int +sgiioc4_ide_dma_check(ide_drive_t * drive) +{ + if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0) { + printk(KERN_INFO + "Couldnot set %s in Multimode-2 DMA mode | " + "Drive %s using PIO instead\n", + drive->name, drive->name); + drive->using_dma = 0; + } else + drive->using_dma = 1; + + return 0; +} + +static int +sgiioc4_ide_dma_on(ide_drive_t * drive) +{ + drive->using_dma = 1; + + return HWIF(drive)->ide_dma_host_on(drive); +} + +static int +sgiioc4_ide_dma_off_quietly(ide_drive_t * drive) +{ + drive->using_dma = 0; + + return HWIF(drive)->ide_dma_host_off(drive); +} + +/* returns 1 if dma irq issued, 0 otherwise */ +static int +sgiioc4_ide_dma_test_irq(ide_drive_t * drive) +{ + return sgiioc4_checkirq(HWIF(drive)); +} + +static int +sgiioc4_ide_dma_host_on(ide_drive_t * drive) +{ + if (drive->using_dma) + return 0; + + return 1; +} + +static int +sgiioc4_ide_dma_host_off(ide_drive_t * drive) +{ + sgiioc4_clearirq(drive); + + return 0; +} + +static int +sgiioc4_ide_dma_lostirq(ide_drive_t * drive) +{ + HWIF(drive)->resetproc(drive); + + return __ide_dma_lostirq(drive); +} + +static void +sgiioc4_resetproc(ide_drive_t * drive) +{ + sgiioc4_ide_dma_end(drive); + sgiioc4_clearirq(drive); +} + +static u8 +sgiioc4_INB(unsigned long port) +{ + u8 reg = (u8) inb(port); + + if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */ + if (reg & 0x51) { /* Not busy...check for interrupt */ + unsigned long other_ir = port - 0x110; + unsigned int intr_reg = (u32) inl(other_ir); + + /* Clear the Interrupt, Error bits on the IOC4 */ + if (intr_reg & 0x03) { + outl(0x03, other_ir); + intr_reg = (u32) inl(other_ir); + } + } + } + + return reg; +} + +/* Creates a dma map for the scatter-gather list entries */ +static void __devinit +ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) +{ + int num_ports = sizeof (ioc4_dma_regs_t); + + printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name, + dma_base, dma_base + num_ports - 1); + + if (!request_region(dma_base, num_ports, hwif->name)) { + printk(KERN_ERR + "%s(%s) -- ERROR, Addresses 0x%p to 0x%p " + "ALREADY in use\n", + __FUNCTION__, hwif->name, (void *) dma_base, + (void *) dma_base + num_ports - 1); + goto dma_alloc_failure; + } + + hwif->dma_base = dma_base; + hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev, + IOC4_PRD_ENTRIES * IOC4_PRD_BYTES, + &hwif->dmatable_dma); + + if (!hwif->dmatable_cpu) + goto dma_alloc_failure; + + hwif->sg_max_nents = IOC4_PRD_ENTRIES; + + hwif->dma_base2 = (unsigned long) + pci_alloc_consistent(hwif->pci_dev, + IOC4_IDE_CACHELINE_SIZE, + (dma_addr_t *) &(hwif->dma_status)); + + if (!hwif->dma_base2) + goto dma_base2alloc_failure; + + return; + +dma_base2alloc_failure: + pci_free_consistent(hwif->pci_dev, + IOC4_PRD_ENTRIES * IOC4_PRD_BYTES, + hwif->dmatable_cpu, hwif->dmatable_dma); + printk(KERN_INFO + "%s() -- Error! Unable to allocate DMA Maps for drive %s\n", + __FUNCTION__, hwif->name); + printk(KERN_INFO + "Changing from DMA to PIO mode for Drive %s\n", hwif->name); + +dma_alloc_failure: + /* Disable DMA because we couldnot allocate any DMA maps */ + hwif->autodma = 0; + hwif->atapi_dma = 0; +} + +/* Initializes the IOC4 DMA Engine */ +static void +sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) +{ + u32 ioc4_dma; + ide_hwif_t *hwif = HWIF(drive); + u64 dma_base = hwif->dma_base; + u32 dma_addr, ending_dma_addr; + + ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4); + + if (ioc4_dma & IOC4_S_DMA_ACTIVE) { + printk(KERN_WARNING + "%s(%s):Warning!! DMA from previous transfer was still active\n", + __FUNCTION__, drive->name); + hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4); + ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); + + if (ioc4_dma & IOC4_S_DMA_STOP) + printk(KERN_ERR + "%s(%s) : IOC4 Dma STOP bit is still 1\n", + __FUNCTION__, drive->name); + } + + ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4); + if (ioc4_dma & IOC4_S_DMA_ERROR) { + printk(KERN_WARNING + "%s(%s) : Warning!! - DMA Error during Previous" + " transfer | status 0x%x\n", + __FUNCTION__, drive->name, ioc4_dma); + hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4); + ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); + + if (ioc4_dma & IOC4_S_DMA_STOP) + printk(KERN_ERR + "%s(%s) : IOC4 DMA STOP bit is still 1\n", + __FUNCTION__, drive->name); + } + + /* Address of the Scatter Gather List */ + dma_addr = cpu_to_le32(hwif->dmatable_dma); + hwif->OUTL(dma_addr, dma_base + IOC4_DMA_PTR_L * 4); + + /* Address of the Ending DMA */ + memset((unsigned int *) hwif->dma_base2, 0, IOC4_IDE_CACHELINE_SIZE); + ending_dma_addr = cpu_to_le32(hwif->dma_status); + hwif->OUTL(ending_dma_addr, dma_base + IOC4_DMA_END_ADDR * 4); + + hwif->OUTL(dma_direction, dma_base + IOC4_DMA_CTRL * 4); + drive->waiting_for_dma = 1; +} + +/* IOC4 Scatter Gather list Format */ +/* 128 Bit entries to support 64 bit addresses in the future */ +/* The Scatter Gather list Entry should be in the BIG-ENDIAN Format */ +/* --------------------------------------------------------------------- */ +/* | Upper 32 bits - Zero | Lower 32 bits- address | */ +/* --------------------------------------------------------------------- */ +/* | Upper 32 bits - Zero |EOL| 15 unused | 16 Bit Length| */ +/* --------------------------------------------------------------------- */ +/* Creates the scatter gather list, DMA Table */ +static unsigned int +sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned int *table = hwif->dmatable_cpu; + unsigned int count = 0, i = 1; + struct scatterlist *sg; + + hwif->sg_nents = i = ide_build_sglist(drive, rq); + + if (!i) + return 0; /* sglist of length Zero */ + + sg = hwif->sg_table; + while (i && sg_dma_len(sg)) { + dma_addr_t cur_addr; + int cur_len; + cur_addr = sg_dma_address(sg); + cur_len = sg_dma_len(sg); + + while (cur_len) { + if (count++ >= IOC4_PRD_ENTRIES) { + printk(KERN_WARNING + "%s: DMA table too small\n", + drive->name); + goto use_pio_instead; + } else { + u32 xcount, bcount = + 0x10000 - (cur_addr & 0xffff); + + if (bcount > cur_len) + bcount = cur_len; + + /* put the addr, length in + * the IOC4 dma-table format */ + *table = 0x0; + table++; + *table = cpu_to_be32(cur_addr); + table++; + *table = 0x0; + table++; + + xcount = bcount & 0xffff; + *table = cpu_to_be32(xcount); + table++; + + cur_addr += bcount; + cur_len -= bcount; + } + } + + sg++; + i--; + } + + if (count) { + table--; + *table |= cpu_to_be32(0x80000000); + return count; + } + +use_pio_instead: + pci_unmap_sg(hwif->pci_dev, hwif->sg_table, hwif->sg_nents, + hwif->sg_dma_direction); + + return 0; /* revert to PIO for this request */ +} + +static int sgiioc4_ide_dma_setup(ide_drive_t *drive) +{ + struct request *rq = HWGROUP(drive)->rq; + unsigned int count = 0; + int ddir; + + if (rq_data_dir(rq)) + ddir = PCI_DMA_TODEVICE; + else + ddir = PCI_DMA_FROMDEVICE; + + if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) { + /* try PIO instead of DMA */ + ide_map_sg(drive, rq); + return 1; + } + + if (rq_data_dir(rq)) + /* Writes TO the IOC4 FROM Main Memory */ + ddir = IOC4_DMA_READ; + else + /* Writes FROM the IOC4 TO Main Memory */ + ddir = IOC4_DMA_WRITE; + + sgiioc4_configure_for_dma(ddir, drive); + + return 0; +} + +static void __devinit +ide_init_sgiioc4(ide_hwif_t * hwif) +{ + hwif->mmio = 2; + hwif->autodma = 1; + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x0; /* Disable Ultra DMA */ + hwif->mwdma_mask = 0x2; /* Multimode-2 DMA */ + hwif->swdma_mask = 0x2; + hwif->tuneproc = NULL; /* Sets timing for PIO mode */ + hwif->speedproc = NULL; /* Sets timing for DMA &/or PIO modes */ + hwif->selectproc = NULL;/* Use the default routine to select drive */ + hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */ + hwif->pre_reset = NULL; /* No HBA specific pre_set needed */ + hwif->resetproc = &sgiioc4_resetproc;/* Reset DMA engine, + clear interrupts */ + hwif->intrproc = NULL; /* Enable or Disable interrupt from drive */ + hwif->maskproc = &sgiioc4_maskproc; /* Mask on/off NIEN register */ + hwif->quirkproc = NULL; + hwif->busproc = NULL; + + hwif->dma_setup = &sgiioc4_ide_dma_setup; + hwif->dma_start = &sgiioc4_ide_dma_start; + hwif->ide_dma_end = &sgiioc4_ide_dma_end; + hwif->ide_dma_check = &sgiioc4_ide_dma_check; + hwif->ide_dma_on = &sgiioc4_ide_dma_on; + hwif->ide_dma_off_quietly = &sgiioc4_ide_dma_off_quietly; + hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq; + hwif->ide_dma_host_on = &sgiioc4_ide_dma_host_on; + hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off; + hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq; + hwif->ide_dma_timeout = &__ide_dma_timeout; + hwif->INB = &sgiioc4_INB; +} + +static int __devinit +sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) +{ + unsigned long base, ctl, dma_base, irqport; + ide_hwif_t *hwif; + int h; + + for (h = 0; h < MAX_HWIFS; ++h) { + hwif = &ide_hwifs[h]; + /* Find an empty HWIF */ + if (hwif->chipset == ide_unknown) + break; + } + + /* Get the CmdBlk and CtrlBlk Base Registers */ + base = pci_resource_start(dev, 0) + IOC4_CMD_OFFSET; + ctl = pci_resource_start(dev, 0) + IOC4_CTRL_OFFSET; + irqport = pci_resource_start(dev, 0) + IOC4_INTR_OFFSET; + dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET; + + if (!request_region(base, IOC4_CMD_CTL_BLK_SIZE, hwif->name)) { + printk(KERN_ERR + "%s : %s -- ERROR, Port Addresses " + "0x%p to 0x%p ALREADY in use\n", + __FUNCTION__, hwif->name, (void *) base, + (void *) base + IOC4_CMD_CTL_BLK_SIZE); + return -ENOMEM; + } + + if (hwif->io_ports[IDE_DATA_OFFSET] != base) { + /* Initialize the IO registers */ + sgiioc4_init_hwif_ports(&hwif->hw, base, ctl, irqport); + memcpy(hwif->io_ports, hwif->hw.io_ports, + sizeof (hwif->io_ports)); + hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET]; + } + + hwif->irq = dev->irq; + hwif->chipset = ide_pci; + hwif->pci_dev = dev; + hwif->channel = 0; /* Single Channel chip */ + hwif->cds = (struct ide_pci_device_s *) d; + hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */ + + /* Initializing chipset IRQ Registers */ + hwif->OUTL(0x03, irqport + IOC4_INTR_SET * 4); + + ide_init_sgiioc4(hwif); + + if (dma_base) + ide_dma_sgiioc4(hwif, dma_base); + else + printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n", + hwif->name, d->name); + + if (probe_hwif_init(hwif)) + return -EIO; + + /* Create /proc/ide entries */ + create_proc_ide_interfaces(); + + return 0; +} + +static unsigned int __devinit +pci_init_sgiioc4(struct pci_dev *dev, ide_pci_device_t * d) +{ + unsigned int class_rev; + int ret; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n", + d->name, pci_name(dev), class_rev); + if (class_rev < IOC4_SUPPORTED_FIRMWARE_REV) { + printk(KERN_ERR "Skipping %s IDE controller in slot %s: " + "firmware is obsolete - please upgrade to revision" + "46 or higher\n", d->name, pci_name(dev)); + ret = -EAGAIN; + goto out; + } + ret = sgiioc4_ide_setup_pci_device(dev, d); +out: + return ret; +} + +static ide_pci_device_t sgiioc4_chipsets[] __devinitdata = { + { + /* Channel 0 */ + .name = "SGIIOC4", + .init_hwif = ide_init_sgiioc4, + .init_dma = ide_dma_sgiioc4, + .channels = 1, + .autodma = AUTODMA, + /* SGI IOC4 doesn't have enablebits. */ + .bootable = ON_BOARD, + } +}; + +int +ioc4_ide_attach_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return pci_init_sgiioc4(dev, &sgiioc4_chipsets[id->driver_data]); +} + + +MODULE_AUTHOR("Aniket Malatpure - Silicon Graphics Inc. (SGI)"); +MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(ioc4_ide_attach_one); diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c new file mode 100644 index 0000000..2b9961b --- /dev/null +++ b/drivers/ide/pci/siimage.c @@ -0,0 +1,1133 @@ +/* + * linux/drivers/ide/pci/siimage.c Version 1.07 Nov 30, 2003 + * + * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2003 Red Hat <alan@redhat.com> + * + * May be copied or modified under the terms of the GNU General Public License + * + * Documentation available under NDA only + * + * + * FAQ Items: + * If you are using Marvell SATA-IDE adapters with Maxtor drives + * ensure the system is set up for ATA100/UDMA5 not UDMA6. + * + * If you are using WD drives with SATA bridges you must set the + * drive to "Single". "Master" will hang + * + * If you have strange problems with nVidia chipset systems please + * see the SI support documentation and update your system BIOS + * if neccessary + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/init.h> + +#include <asm/io.h> + +#undef SIIMAGE_VIRTUAL_DMAPIO +#undef SIIMAGE_LARGE_DMA + +/** + * pdev_is_sata - check if device is SATA + * @pdev: PCI device to check + * + * Returns true if this is a SATA controller + */ + +static int pdev_is_sata(struct pci_dev *pdev) +{ + switch(pdev->device) + { + case PCI_DEVICE_ID_SII_3112: + case PCI_DEVICE_ID_SII_1210SA: + return 1; + case PCI_DEVICE_ID_SII_680: + return 0; + } + BUG(); + return 0; +} + +/** + * is_sata - check if hwif is SATA + * @hwif: interface to check + * + * Returns true if this is a SATA controller + */ + +static inline int is_sata(ide_hwif_t *hwif) +{ + return pdev_is_sata(hwif->pci_dev); +} + +/** + * siimage_selreg - return register base + * @hwif: interface + * @r: config offset + * + * Turn a config register offset into the right address in either + * PCI space or MMIO space to access the control register in question + * Thankfully this is a configuration operation so isnt performance + * criticial. + */ + +static unsigned long siimage_selreg(ide_hwif_t *hwif, int r) +{ + unsigned long base = (unsigned long)hwif->hwif_data; + base += 0xA0 + r; + if(hwif->mmio) + base += (hwif->channel << 6); + else + base += (hwif->channel << 4); + return base; +} + +/** + * siimage_seldev - return register base + * @hwif: interface + * @r: config offset + * + * Turn a config register offset into the right address in either + * PCI space or MMIO space to access the control register in question + * including accounting for the unit shift. + */ + +static inline unsigned long siimage_seldev(ide_drive_t *drive, int r) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned long base = (unsigned long)hwif->hwif_data; + base += 0xA0 + r; + if(hwif->mmio) + base += (hwif->channel << 6); + else + base += (hwif->channel << 4); + base |= drive->select.b.unit << drive->select.b.unit; + return base; +} + +/** + * siimage_ratemask - Compute available modes + * @drive: IDE drive + * + * Compute the available speeds for the devices on the interface. + * For the CMD680 this depends on the clocking mode (scsc), for the + * SI3312 SATA controller life is a bit simpler. Enforce UDMA33 + * as a limit if there is no 80pin cable present. + */ + +static byte siimage_ratemask (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 mode = 0, scsc = 0; + unsigned long base = (unsigned long) hwif->hwif_data; + + if (hwif->mmio) + scsc = hwif->INB(base + 0x4A); + else + pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc); + + if(is_sata(hwif)) + { + if(strstr(drive->id->model, "Maxtor")) + return 3; + return 4; + } + + if ((scsc & 0x30) == 0x10) /* 133 */ + mode = 4; + else if ((scsc & 0x30) == 0x20) /* 2xPCI */ + mode = 4; + else if ((scsc & 0x30) == 0x00) /* 100 */ + mode = 3; + else /* Disabled ? */ + BUG(); + + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + return mode; +} + +/** + * siimage_taskfile_timing - turn timing data to a mode + * @hwif: interface to query + * + * Read the timing data for the interface and return the + * mode that is being used. + */ + +static byte siimage_taskfile_timing (ide_hwif_t *hwif) +{ + u16 timing = 0x328a; + unsigned long addr = siimage_selreg(hwif, 2); + + if (hwif->mmio) + timing = hwif->INW(addr); + else + pci_read_config_word(hwif->pci_dev, addr, &timing); + + switch (timing) { + case 0x10c1: return 4; + case 0x10c3: return 3; + case 0x1104: + case 0x1281: return 2; + case 0x2283: return 1; + case 0x328a: + default: return 0; + } +} + +/** + * simmage_tuneproc - tune a drive + * @drive: drive to tune + * @mode_wanted: the target operating mode + * + * Load the timing settings for this device mode into the + * controller. If we are in PIO mode 3 or 4 turn on IORDY + * monitoring (bit 9). The TF timing is bits 31:16 + */ + +static void siimage_tuneproc (ide_drive_t *drive, byte mode_wanted) +{ + ide_hwif_t *hwif = HWIF(drive); + u32 speedt = 0; + u16 speedp = 0; + unsigned long addr = siimage_seldev(drive, 0x04); + unsigned long tfaddr = siimage_selreg(hwif, 0x02); + + /* cheat for now and use the docs */ + switch(mode_wanted) { + case 4: + speedp = 0x10c1; + speedt = 0x10c1; + break; + case 3: + speedp = 0x10C3; + speedt = 0x10C3; + break; + case 2: + speedp = 0x1104; + speedt = 0x1281; + break; + case 1: + speedp = 0x2283; + speedt = 0x1281; + break; + case 0: + default: + speedp = 0x328A; + speedt = 0x328A; + break; + } + if (hwif->mmio) + { + hwif->OUTW(speedt, addr); + hwif->OUTW(speedp, tfaddr); + /* Now set up IORDY */ + if(mode_wanted == 3 || mode_wanted == 4) + hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2); + else + hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2); + } + else + { + pci_write_config_word(hwif->pci_dev, addr, speedp); + pci_write_config_word(hwif->pci_dev, tfaddr, speedt); + pci_read_config_word(hwif->pci_dev, tfaddr-2, &speedp); + speedp &= ~0x200; + /* Set IORDY for mode 3 or 4 */ + if(mode_wanted == 3 || mode_wanted == 4) + speedp |= 0x200; + pci_write_config_word(hwif->pci_dev, tfaddr-2, speedp); + } +} + +/** + * config_siimage_chipset_for_pio - set drive timings + * @drive: drive to tune + * @speed we want + * + * Compute the best pio mode we can for a given device. Also honour + * the timings for the driver when dealing with mixed devices. Some + * of this is ugly but its all wrapped up here + * + * The SI680 can also do VDMA - we need to start using that + * + * FIXME: we use the BIOS channel timings to avoid driving the task + * files too fast at the disk. We need to compute the master/slave + * drive PIO mode properly so that we can up the speed on a hotplug + * system. + */ + +static void config_siimage_chipset_for_pio (ide_drive_t *drive, byte set_speed) +{ + u8 channel_timings = siimage_taskfile_timing(HWIF(drive)); + u8 speed = 0, set_pio = ide_get_best_pio_mode(drive, 4, 5, NULL); + + /* WARNING PIO timing mess is going to happen b/w devices, argh */ + if ((channel_timings != set_pio) && (set_pio > channel_timings)) + set_pio = channel_timings; + + siimage_tuneproc(drive, set_pio); + speed = XFER_PIO_0 + set_pio; + if (set_speed) + (void) ide_config_drive_speed(drive, speed); +} + +static void config_chipset_for_pio (ide_drive_t *drive, byte set_speed) +{ + config_siimage_chipset_for_pio(drive, set_speed); +} + +/** + * siimage_tune_chipset - set controller timings + * @drive: Drive to set up + * @xferspeed: speed we want to achieve + * + * Tune the SII chipset for the desired mode. If we can't achieve + * the desired mode then tune for a lower one, but ultimately + * make the thing work. + */ + +static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed) +{ + u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; + u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; + u16 dma[] = { 0x2208, 0x10C2, 0x10C1 }; + + ide_hwif_t *hwif = HWIF(drive); + u16 ultra = 0, multi = 0; + u8 mode = 0, unit = drive->select.b.unit; + u8 speed = ide_rate_filter(siimage_ratemask(drive), xferspeed); + unsigned long base = (unsigned long)hwif->hwif_data; + u8 scsc = 0, addr_mask = ((hwif->channel) ? + ((hwif->mmio) ? 0xF4 : 0x84) : + ((hwif->mmio) ? 0xB4 : 0x80)); + + unsigned long ma = siimage_seldev(drive, 0x08); + unsigned long ua = siimage_seldev(drive, 0x0C); + + if (hwif->mmio) { + scsc = hwif->INB(base + 0x4A); + mode = hwif->INB(base + addr_mask); + multi = hwif->INW(ma); + ultra = hwif->INW(ua); + } else { + pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc); + pci_read_config_byte(hwif->pci_dev, addr_mask, &mode); + pci_read_config_word(hwif->pci_dev, ma, &multi); + pci_read_config_word(hwif->pci_dev, ua, &ultra); + } + + mode &= ~((unit) ? 0x30 : 0x03); + ultra &= ~0x3F; + scsc = ((scsc & 0x30) == 0x00) ? 0 : 1; + + scsc = is_sata(hwif) ? 1 : scsc; + + switch(speed) { + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: + case XFER_PIO_0: + siimage_tuneproc(drive, (speed - XFER_PIO_0)); + mode |= ((unit) ? 0x10 : 0x01); + break; + case XFER_MW_DMA_2: + case XFER_MW_DMA_1: + case XFER_MW_DMA_0: + multi = dma[speed - XFER_MW_DMA_0]; + mode |= ((unit) ? 0x20 : 0x02); + config_siimage_chipset_for_pio(drive, 0); + break; + case XFER_UDMA_6: + case XFER_UDMA_5: + case XFER_UDMA_4: + case XFER_UDMA_3: + case XFER_UDMA_2: + case XFER_UDMA_1: + case XFER_UDMA_0: + multi = dma[2]; + ultra |= ((scsc) ? (ultra6[speed - XFER_UDMA_0]) : + (ultra5[speed - XFER_UDMA_0])); + mode |= ((unit) ? 0x30 : 0x03); + config_siimage_chipset_for_pio(drive, 0); + break; + default: + return 1; + } + + if (hwif->mmio) { + hwif->OUTB(mode, base + addr_mask); + hwif->OUTW(multi, ma); + hwif->OUTW(ultra, ua); + } else { + pci_write_config_byte(hwif->pci_dev, addr_mask, mode); + pci_write_config_word(hwif->pci_dev, ma, multi); + pci_write_config_word(hwif->pci_dev, ua, ultra); + } + return (ide_config_drive_speed(drive, speed)); +} + +/** + * config_chipset_for_dma - configure for DMA + * @drive: drive to configure + * + * Called by the IDE layer when it wants the timings set up. + * For the CMD680 we also need to set up the PIO timings and + * enable DMA. + */ + +static int config_chipset_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, siimage_ratemask(drive)); + + config_chipset_for_pio(drive, !speed); + + if (!speed) + return 0; + + if (ide_set_xfer_rate(drive, speed)) + return 0; + + if (!drive->init_speed) + drive->init_speed = speed; + + return ide_dma_enable(drive); +} + +/** + * siimage_configure_drive_for_dma - set up for DMA transfers + * @drive: drive we are going to set up + * + * Set up the drive for DMA, tune the controller and drive as + * required. If the drive isn't suitable for DMA or we hit + * other problems then we will drop down to PIO and set up + * PIO appropriately + */ + +static int siimage_config_drive_for_dma (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + if ((id->capability & 1) != 0 && drive->autodma) { + + if (ide_use_dma(drive)) { + if (config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + config_chipset_for_pio(drive, 1); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +/* returns 1 if dma irq issued, 0 otherwise */ +static int siimage_io_ide_dma_test_irq (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 dma_altstat = 0; + unsigned long addr = siimage_selreg(hwif, 1); + + /* return 1 if INTR asserted */ + if ((hwif->INB(hwif->dma_status) & 4) == 4) + return 1; + + /* return 1 if Device INTR asserted */ + pci_read_config_byte(hwif->pci_dev, addr, &dma_altstat); + if (dma_altstat & 8) + return 0; //return 1; + return 0; +} + +#if 0 +/** + * siimage_mmio_ide_dma_count - DMA bytes done + * @drive + * + * If we are doing VDMA the CMD680 requires a little bit + * of more careful handling and we have to read the counts + * off ourselves. For non VDMA life is normal. + */ + +static int siimage_mmio_ide_dma_count (ide_drive_t *drive) +{ +#ifdef SIIMAGE_VIRTUAL_DMAPIO + struct request *rq = HWGROUP(drive)->rq; + ide_hwif_t *hwif = HWIF(drive); + u32 count = (rq->nr_sectors * SECTOR_SIZE); + u32 rcount = 0; + unsigned long addr = siimage_selreg(hwif, 0x1C); + + hwif->OUTL(count, addr); + rcount = hwif->INL(addr); + + printk("\n%s: count = %d, rcount = %d, nr_sectors = %lu\n", + drive->name, count, rcount, rq->nr_sectors); + +#endif /* SIIMAGE_VIRTUAL_DMAPIO */ + return __ide_dma_count(drive); +} +#endif + +/** + * siimage_mmio_ide_dma_test_irq - check we caused an IRQ + * @drive: drive we are testing + * + * Check if we caused an IDE DMA interrupt. We may also have caused + * SATA status interrupts, if so we clean them up and continue. + */ + +static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned long base = (unsigned long)hwif->hwif_data; + unsigned long addr = siimage_selreg(hwif, 0x1); + + if (SATA_ERROR_REG) { + u32 ext_stat = hwif->INL(base + 0x10); + u8 watchdog = 0; + if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) { + u32 sata_error = hwif->INL(SATA_ERROR_REG); + hwif->OUTL(sata_error, SATA_ERROR_REG); + watchdog = (sata_error & 0x00680000) ? 1 : 0; +#if 1 + printk(KERN_WARNING "%s: sata_error = 0x%08x, " + "watchdog = %d, %s\n", + drive->name, sata_error, watchdog, + __FUNCTION__); +#endif + + } else { + watchdog = (ext_stat & 0x8000) ? 1 : 0; + } + ext_stat >>= 16; + + if (!(ext_stat & 0x0404) && !watchdog) + return 0; + } + + /* return 1 if INTR asserted */ + if ((hwif->INB(hwif->dma_status) & 0x04) == 0x04) + return 1; + + /* return 1 if Device INTR asserted */ + if ((hwif->INB(addr) & 8) == 8) + return 0; //return 1; + + return 0; +} + +/** + * siimage_busproc - bus isolation ioctl + * @drive: drive to isolate/restore + * @state: bus state to set + * + * Used by the SII3112 to handle bus isolation. As this is a + * SATA controller the work required is quite limited, we + * just have to clean up the statistics + */ + +static int siimage_busproc (ide_drive_t * drive, int state) +{ + ide_hwif_t *hwif = HWIF(drive); + u32 stat_config = 0; + unsigned long addr = siimage_selreg(hwif, 0); + + if (hwif->mmio) { + stat_config = hwif->INL(addr); + } else + pci_read_config_dword(hwif->pci_dev, addr, &stat_config); + + switch (state) { + case BUSSTATE_ON: + hwif->drives[0].failures = 0; + hwif->drives[1].failures = 0; + break; + case BUSSTATE_OFF: + hwif->drives[0].failures = hwif->drives[0].max_failures + 1; + hwif->drives[1].failures = hwif->drives[1].max_failures + 1; + break; + case BUSSTATE_TRISTATE: + hwif->drives[0].failures = hwif->drives[0].max_failures + 1; + hwif->drives[1].failures = hwif->drives[1].max_failures + 1; + break; + default: + return -EINVAL; + } + hwif->bus_state = state; + return 0; +} + +/** + * siimage_reset_poll - wait for sata reset + * @drive: drive we are resetting + * + * Poll the SATA phy and see whether it has come back from the dead + * yet. + */ + +static int siimage_reset_poll (ide_drive_t *drive) +{ + if (SATA_STATUS_REG) { + ide_hwif_t *hwif = HWIF(drive); + + if ((hwif->INL(SATA_STATUS_REG) & 0x03) != 0x03) { + printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n", + hwif->name, hwif->INL(SATA_STATUS_REG)); + HWGROUP(drive)->polling = 0; + return ide_started; + } + return 0; + } else { + return 0; + } +} + +/** + * siimage_pre_reset - reset hook + * @drive: IDE device being reset + * + * For the SATA devices we need to handle recalibration/geometry + * differently + */ + +static void siimage_pre_reset (ide_drive_t *drive) +{ + if (drive->media != ide_disk) + return; + + if (is_sata(HWIF(drive))) + { + drive->special.b.set_geometry = 0; + drive->special.b.recalibrate = 0; + } +} + +/** + * siimage_reset - reset a device on an siimage controller + * @drive: drive to reset + * + * Perform a controller level reset fo the device. For + * SATA we must also check the PHY. + */ + +static void siimage_reset (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 reset = 0; + unsigned long addr = siimage_selreg(hwif, 0); + + if (hwif->mmio) { + reset = hwif->INB(addr); + hwif->OUTB((reset|0x03), addr); + /* FIXME:posting */ + udelay(25); + hwif->OUTB(reset, addr); + (void) hwif->INB(addr); + } else { + pci_read_config_byte(hwif->pci_dev, addr, &reset); + pci_write_config_byte(hwif->pci_dev, addr, reset|0x03); + udelay(25); + pci_write_config_byte(hwif->pci_dev, addr, reset); + pci_read_config_byte(hwif->pci_dev, addr, &reset); + } + + if (SATA_STATUS_REG) { + u32 sata_stat = hwif->INL(SATA_STATUS_REG); + printk(KERN_WARNING "%s: reset phy, status=0x%08x, %s\n", + hwif->name, sata_stat, __FUNCTION__); + if (!(sata_stat)) { + printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n", + hwif->name, sata_stat); + drive->failures++; + } + } + +} + +/** + * proc_reports_siimage - add siimage controller to proc + * @dev: PCI device + * @clocking: SCSC value + * @name: controller name + * + * Report the clocking mode of the controller and add it to + * the /proc interface layer + */ + +static void proc_reports_siimage (struct pci_dev *dev, u8 clocking, const char *name) +{ + if (!pdev_is_sata(dev)) { + printk(KERN_INFO "%s: BASE CLOCK ", name); + clocking &= 0x03; + switch (clocking) { + case 0x03: printk("DISABLED!\n"); break; + case 0x02: printk("== 2X PCI\n"); break; + case 0x01: printk("== 133\n"); break; + case 0x00: printk("== 100\n"); break; + } + } +} + +/** + * setup_mmio_siimage - switch an SI controller into MMIO + * @dev: PCI device we are configuring + * @name: device name + * + * Attempt to put the device into mmio mode. There are some slight + * complications here with certain systems where the mmio bar isnt + * mapped so we have to be sure we can fall back to I/O. + */ + +static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name) +{ + unsigned long bar5 = pci_resource_start(dev, 5); + unsigned long barsize = pci_resource_len(dev, 5); + u8 tmpbyte = 0; + void __iomem *ioaddr; + + /* + * Drop back to PIO if we can't map the mmio. Some + * systems seem to get terminally confused in the PCI + * spaces. + */ + + if(!request_mem_region(bar5, barsize, name)) + { + printk(KERN_WARNING "siimage: IDE controller MMIO ports not available.\n"); + return 0; + } + + ioaddr = ioremap(bar5, barsize); + + if (ioaddr == NULL) + { + release_mem_region(bar5, barsize); + return 0; + } + + pci_set_master(dev); + pci_set_drvdata(dev, (void *) ioaddr); + + if (pdev_is_sata(dev)) { + writel(0, ioaddr + 0x148); + writel(0, ioaddr + 0x1C8); + } + + writeb(0, ioaddr + 0xB4); + writeb(0, ioaddr + 0xF4); + tmpbyte = readb(ioaddr + 0x4A); + + switch(tmpbyte & 0x30) { + case 0x00: + /* In 100 MHz clocking, try and switch to 133 */ + writeb(tmpbyte|0x10, ioaddr + 0x4A); + break; + case 0x10: + /* On 133Mhz clocking */ + break; + case 0x20: + /* On PCIx2 clocking */ + break; + case 0x30: + /* Clocking is disabled */ + /* 133 clock attempt to force it on */ + writeb(tmpbyte & ~0x20, ioaddr + 0x4A); + break; + } + + writeb( 0x72, ioaddr + 0xA1); + writew( 0x328A, ioaddr + 0xA2); + writel(0x62DD62DD, ioaddr + 0xA4); + writel(0x43924392, ioaddr + 0xA8); + writel(0x40094009, ioaddr + 0xAC); + writeb( 0x72, ioaddr + 0xE1); + writew( 0x328A, ioaddr + 0xE2); + writel(0x62DD62DD, ioaddr + 0xE4); + writel(0x43924392, ioaddr + 0xE8); + writel(0x40094009, ioaddr + 0xEC); + + if (pdev_is_sata(dev)) { + writel(0xFFFF0000, ioaddr + 0x108); + writel(0xFFFF0000, ioaddr + 0x188); + writel(0x00680000, ioaddr + 0x148); + writel(0x00680000, ioaddr + 0x1C8); + } + + tmpbyte = readb(ioaddr + 0x4A); + + proc_reports_siimage(dev, (tmpbyte>>4), name); + return 1; +} + +/** + * init_chipset_siimage - set up an SI device + * @dev: PCI device + * @name: device name + * + * Perform the initial PCI set up for this device. Attempt to switch + * to 133MHz clocking if the system isn't already set up to do it. + */ + +static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const char *name) +{ + u32 class_rev = 0; + u8 tmpbyte = 0; + u8 BA5_EN = 0; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255); + + pci_read_config_byte(dev, 0x8A, &BA5_EN); + if ((BA5_EN & 0x01) || (pci_resource_start(dev, 5))) { + if (setup_mmio_siimage(dev, name)) { + return 0; + } + } + + pci_write_config_byte(dev, 0x80, 0x00); + pci_write_config_byte(dev, 0x84, 0x00); + pci_read_config_byte(dev, 0x8A, &tmpbyte); + switch(tmpbyte & 0x30) { + case 0x00: + /* 133 clock attempt to force it on */ + pci_write_config_byte(dev, 0x8A, tmpbyte|0x10); + case 0x30: + /* if clocking is disabled */ + /* 133 clock attempt to force it on */ + pci_write_config_byte(dev, 0x8A, tmpbyte & ~0x20); + case 0x10: + /* 133 already */ + break; + case 0x20: + /* BIOS set PCI x2 clocking */ + break; + } + + pci_read_config_byte(dev, 0x8A, &tmpbyte); + + pci_write_config_byte(dev, 0xA1, 0x72); + pci_write_config_word(dev, 0xA2, 0x328A); + pci_write_config_dword(dev, 0xA4, 0x62DD62DD); + pci_write_config_dword(dev, 0xA8, 0x43924392); + pci_write_config_dword(dev, 0xAC, 0x40094009); + pci_write_config_byte(dev, 0xB1, 0x72); + pci_write_config_word(dev, 0xB2, 0x328A); + pci_write_config_dword(dev, 0xB4, 0x62DD62DD); + pci_write_config_dword(dev, 0xB8, 0x43924392); + pci_write_config_dword(dev, 0xBC, 0x40094009); + + proc_reports_siimage(dev, (tmpbyte>>4), name); + return 0; +} + +/** + * init_mmio_iops_siimage - set up the iops for MMIO + * @hwif: interface to set up + * + * The basic setup here is fairly simple, we can use standard MMIO + * operations. However we do have to set the taskfile register offsets + * by hand as there isnt a standard defined layout for them this + * time. + * + * The hardware supports buffered taskfiles and also some rather nice + * extended PRD tables. Unfortunately right now we don't. + */ + +static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + void *addr = pci_get_drvdata(dev); + u8 ch = hwif->channel; + hw_regs_t hw; + unsigned long base; + + /* + * Fill in the basic HWIF bits + */ + + default_hwif_mmiops(hwif); + hwif->hwif_data = addr; + + /* + * Now set up the hw. We have to do this ourselves as + * the MMIO layout isnt the same as the the standard port + * based I/O + */ + + memset(&hw, 0, sizeof(hw_regs_t)); + + base = (unsigned long)addr; + if (ch) + base += 0xC0; + else + base += 0x80; + + /* + * The buffered task file doesn't have status/control + * so we can't currently use it sanely since we want to + * use LBA48 mode. + */ +// base += 0x10; +// hwif->no_lba48 = 1; + + hw.io_ports[IDE_DATA_OFFSET] = base; + hw.io_ports[IDE_ERROR_OFFSET] = base + 1; + hw.io_ports[IDE_NSECTOR_OFFSET] = base + 2; + hw.io_ports[IDE_SECTOR_OFFSET] = base + 3; + hw.io_ports[IDE_LCYL_OFFSET] = base + 4; + hw.io_ports[IDE_HCYL_OFFSET] = base + 5; + hw.io_ports[IDE_SELECT_OFFSET] = base + 6; + hw.io_ports[IDE_STATUS_OFFSET] = base + 7; + hw.io_ports[IDE_CONTROL_OFFSET] = base + 10; + + hw.io_ports[IDE_IRQ_OFFSET] = 0; + + if (pdev_is_sata(dev)) { + base = (unsigned long)addr; + if (ch) + base += 0x80; + hwif->sata_scr[SATA_STATUS_OFFSET] = base + 0x104; + hwif->sata_scr[SATA_ERROR_OFFSET] = base + 0x108; + hwif->sata_scr[SATA_CONTROL_OFFSET] = base + 0x100; + hwif->sata_misc[SATA_MISC_OFFSET] = base + 0x140; + hwif->sata_misc[SATA_PHY_OFFSET] = base + 0x144; + hwif->sata_misc[SATA_IEN_OFFSET] = base + 0x148; + } + + hw.irq = hwif->pci_dev->irq; + + memcpy(&hwif->hw, &hw, sizeof(hw)); + memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->hw.io_ports)); + + hwif->irq = hw.irq; + + base = (unsigned long) addr; + +#ifdef SIIMAGE_LARGE_DMA +/* Watch the brackets - even Ken and Dennis get some language design wrong */ + hwif->dma_base = base + (ch ? 0x18 : 0x10); + hwif->dma_base2 = base + (ch ? 0x08 : 0x00); + hwif->dma_prdtable = hwif->dma_base2 + 4; +#else /* ! SIIMAGE_LARGE_DMA */ + hwif->dma_base = base + (ch ? 0x08 : 0x00); + hwif->dma_base2 = base + (ch ? 0x18 : 0x10); +#endif /* SIIMAGE_LARGE_DMA */ + hwif->mmio = 2; +} + +static int is_dev_seagate_sata(ide_drive_t *drive) +{ + const char *s = &drive->id->model[0]; + unsigned len; + + if (!drive->present) + return 0; + + len = strnlen(s, sizeof(drive->id->model)); + + if ((len > 4) && (!memcmp(s, "ST", 2))) { + if ((!memcmp(s + len - 2, "AS", 2)) || + (!memcmp(s + len - 3, "ASL", 3))) { + printk(KERN_INFO "%s: applying pessimistic Seagate " + "errata fix\n", drive->name); + return 1; + } + } + return 0; +} + +/** + * siimage_fixup - post probe fixups + * @hwif: interface to fix up + * + * Called after drive probe we use this to decide whether the + * Seagate fixup must be applied. This used to be in init_iops but + * that can occur before we know what drives are present. + */ + +static void __devinit siimage_fixup(ide_hwif_t *hwif) +{ + /* Try and raise the rqsize */ + if (!is_sata(hwif) || !is_dev_seagate_sata(&hwif->drives[0])) + hwif->rqsize = 128; +} + +/** + * init_iops_siimage - set up iops + * @hwif: interface to set up + * + * Do the basic setup for the SIIMAGE hardware interface + * and then do the MMIO setup if we can. This is the first + * look in we get for setting up the hwif so that we + * can get the iops right before using them. + */ + +static void __devinit init_iops_siimage(ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + u32 class_rev = 0; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + + hwif->hwif_data = NULL; + + /* Pessimal until we finish probing */ + hwif->rqsize = 15; + + if (pci_get_drvdata(dev) == NULL) + return; + init_mmio_iops_siimage(hwif); +} + +/** + * ata66_siimage - check for 80 pin cable + * @hwif: interface to check + * + * Check for the presence of an ATA66 capable cable on the + * interface. + */ + +static unsigned int __devinit ata66_siimage(ide_hwif_t *hwif) +{ + unsigned long addr = siimage_selreg(hwif, 0); + if (pci_get_drvdata(hwif->pci_dev) == NULL) { + u8 ata66 = 0; + pci_read_config_byte(hwif->pci_dev, addr, &ata66); + return (ata66 & 0x01) ? 1 : 0; + } + + return (hwif->INB(addr) & 0x01) ? 1 : 0; +} + +/** + * init_hwif_siimage - set up hwif structs + * @hwif: interface to set up + * + * We do the basic set up of the interface structure. The SIIMAGE + * requires several custom handlers so we override the default + * ide DMA handlers appropriately + */ + +static void __devinit init_hwif_siimage(ide_hwif_t *hwif) +{ + hwif->autodma = 0; + + hwif->resetproc = &siimage_reset; + hwif->speedproc = &siimage_tune_chipset; + hwif->tuneproc = &siimage_tuneproc; + hwif->reset_poll = &siimage_reset_poll; + hwif->pre_reset = &siimage_pre_reset; + + if(is_sata(hwif)) + hwif->busproc = &siimage_busproc; + + if (!hwif->dma_base) { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + return; + } + + hwif->ultra_mask = 0x7f; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + if (!is_sata(hwif)) + hwif->atapi_dma = 1; + + hwif->ide_dma_check = &siimage_config_drive_for_dma; + if (!(hwif->udma_four)) + hwif->udma_four = ata66_siimage(hwif); + + if (hwif->mmio) { + hwif->ide_dma_test_irq = &siimage_mmio_ide_dma_test_irq; + } else { + hwif->ide_dma_test_irq = & siimage_io_ide_dma_test_irq; + } + + /* + * The BIOS often doesn't set up DMA on this controller + * so we always do it. + */ + + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +#define DECLARE_SII_DEV(name_str) \ + { \ + .name = name_str, \ + .init_chipset = init_chipset_siimage, \ + .init_iops = init_iops_siimage, \ + .init_hwif = init_hwif_siimage, \ + .fixup = siimage_fixup, \ + .channels = 2, \ + .autodma = AUTODMA, \ + .bootable = ON_BOARD, \ + } + +static ide_pci_device_t siimage_chipsets[] __devinitdata = { + /* 0 */ DECLARE_SII_DEV("SiI680"), + /* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA"), + /* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA") +}; + +/** + * siimage_init_one - pci layer discovery entry + * @dev: PCI device + * @id: ident table entry + * + * Called by the PCI code when it finds an SI680 or SI3112 controller. + * We then use the IDE PCI generic helper to do most of the work. + */ + +static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &siimage_chipsets[id->driver_data]); +} + +static struct pci_device_id siimage_pci_tbl[] = { + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#ifdef CONFIG_BLK_DEV_IDE_SATA + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, +#endif + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, siimage_pci_tbl); + +static struct pci_driver driver = { + .name = "SiI_IDE", + .id_table = siimage_pci_tbl, + .probe = siimage_init_one, +}; + +static int siimage_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(siimage_ide_init); + +MODULE_AUTHOR("Andre Hedrick, Alan Cox"); +MODULE_DESCRIPTION("PCI driver module for SiI IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c new file mode 100644 index 0000000..9d70ba5 --- /dev/null +++ b/drivers/ide/pci/sis5513.c @@ -0,0 +1,984 @@ +/* + * linux/drivers/ide/pci/sis5513.c Version 0.16ac+vp Jun 18, 2003 + * + * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer + * Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz> + * May be copied or modified under the terms of the GNU General Public License + * + * + * Thanks : + * + * SiS Taiwan : for direct support and hardware. + * Daniela Engert : for initial ATA100 advices and numerous others. + * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt : + * for checking code correctness, providing patches. + * + * + * Original tests and design on the SiS620 chipset. + * ATA100 tests and design on the SiS735 chipset. + * ATA16/33 support from specs + * ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw> + * ATA133 961/962/963 fixes by Vojtech Pavlik <vojtech@suse.cz> + * + * Documentation: + * SiS chipset documentation available under NDA to companies only + * (not to individuals). + */ + +/* + * The original SiS5513 comes from a SiS5511/55112/5513 chipset. The original + * SiS5513 was also used in the SiS5596/5513 chipset. Thus if we see a SiS5511 + * or SiS5596, we can assume we see the first MWDMA-16 capable SiS5513 chip. + * + * Later SiS chipsets integrated the 5513 functionality into the NorthBridge, + * starting with SiS5571 and up to SiS745. The PCI ID didn't change, though. We + * can figure out that we have a more modern and more capable 5513 by looking + * for the respective NorthBridge IDs. + * + * Even later (96x family) SiS chipsets use the MuTIOL link and place the 5513 + * into the SouthBrige. Here we cannot rely on looking up the NorthBridge PCI + * ID, while the now ATA-133 capable 5513 still has the same PCI ID. + * Fortunately the 5513 can be 'unmasked' by fiddling with some config space + * bits, changing its device id to the true one - 5517 for 961 and 5518 for + * 962/963. + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ide.h> + +#include <asm/irq.h> + +#include "ide-timing.h" + +#define DISPLAY_SIS_TIMINGS + +/* registers layout and init values are chipset family dependant */ + +#define ATA_16 0x01 +#define ATA_33 0x02 +#define ATA_66 0x03 +#define ATA_100a 0x04 // SiS730/SiS550 is ATA100 with ATA66 layout +#define ATA_100 0x05 +#define ATA_133a 0x06 // SiS961b with 133 support +#define ATA_133 0x07 // SiS962/963 + +static u8 chipset_family; + +/* + * Devices supported + */ +static const struct { + const char *name; + u16 host_id; + u8 chipset_family; + u8 flags; +} SiSHostChipInfo[] = { + { "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 }, + { "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 }, + { "SiS733", PCI_DEVICE_ID_SI_733, ATA_100 }, + { "SiS635", PCI_DEVICE_ID_SI_635, ATA_100 }, + { "SiS633", PCI_DEVICE_ID_SI_633, ATA_100 }, + + { "SiS730", PCI_DEVICE_ID_SI_730, ATA_100a }, + { "SiS550", PCI_DEVICE_ID_SI_550, ATA_100a }, + + { "SiS640", PCI_DEVICE_ID_SI_640, ATA_66 }, + { "SiS630", PCI_DEVICE_ID_SI_630, ATA_66 }, + { "SiS620", PCI_DEVICE_ID_SI_620, ATA_66 }, + { "SiS540", PCI_DEVICE_ID_SI_540, ATA_66 }, + { "SiS530", PCI_DEVICE_ID_SI_530, ATA_66 }, + + { "SiS5600", PCI_DEVICE_ID_SI_5600, ATA_33 }, + { "SiS5598", PCI_DEVICE_ID_SI_5598, ATA_33 }, + { "SiS5597", PCI_DEVICE_ID_SI_5597, ATA_33 }, + { "SiS5591/2", PCI_DEVICE_ID_SI_5591, ATA_33 }, + { "SiS5582", PCI_DEVICE_ID_SI_5582, ATA_33 }, + { "SiS5581", PCI_DEVICE_ID_SI_5581, ATA_33 }, + + { "SiS5596", PCI_DEVICE_ID_SI_5596, ATA_16 }, + { "SiS5571", PCI_DEVICE_ID_SI_5571, ATA_16 }, + { "SiS551x", PCI_DEVICE_ID_SI_5511, ATA_16 }, +}; + +/* Cycle time bits and values vary across chip dma capabilities + These three arrays hold the register layout and the values to set. + Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */ + +/* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */ +static u8 cycle_time_offset[] = {0,0,5,4,4,0,0}; +static u8 cycle_time_range[] = {0,0,2,3,3,4,4}; +static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = { + {0,0,0,0,0,0,0}, /* no udma */ + {0,0,0,0,0,0,0}, /* no udma */ + {3,2,1,0,0,0,0}, /* ATA_33 */ + {7,5,3,2,1,0,0}, /* ATA_66 */ + {7,5,3,2,1,0,0}, /* ATA_100a (730 specific), differences are on cycle_time range and offset */ + {11,7,5,4,2,1,0}, /* ATA_100 */ + {15,10,7,5,3,2,1}, /* ATA_133a (earliest 691 southbridges) */ + {15,10,7,5,3,2,1}, /* ATA_133 */ +}; +/* CRC Valid Setup Time vary across IDE clock setting 33/66/100/133 + See SiS962 data sheet for more detail */ +static u8 cvs_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = { + {0,0,0,0,0,0,0}, /* no udma */ + {0,0,0,0,0,0,0}, /* no udma */ + {2,1,1,0,0,0,0}, + {4,3,2,1,0,0,0}, + {4,3,2,1,0,0,0}, + {6,4,3,1,1,1,0}, + {9,6,4,2,2,2,2}, + {9,6,4,2,2,2,2}, +}; +/* Initialize time, Active time, Recovery time vary across + IDE clock settings. These 3 arrays hold the register value + for PIO0/1/2/3/4 and DMA0/1/2 mode in order */ +static u8 ini_time_value[][8] = { + {0,0,0,0,0,0,0,0}, + {0,0,0,0,0,0,0,0}, + {2,1,0,0,0,1,0,0}, + {4,3,1,1,1,3,1,1}, + {4,3,1,1,1,3,1,1}, + {6,4,2,2,2,4,2,2}, + {9,6,3,3,3,6,3,3}, + {9,6,3,3,3,6,3,3}, +}; +static u8 act_time_value[][8] = { + {0,0,0,0,0,0,0,0}, + {0,0,0,0,0,0,0,0}, + {9,9,9,2,2,7,2,2}, + {19,19,19,5,4,14,5,4}, + {19,19,19,5,4,14,5,4}, + {28,28,28,7,6,21,7,6}, + {38,38,38,10,9,28,10,9}, + {38,38,38,10,9,28,10,9}, +}; +static u8 rco_time_value[][8] = { + {0,0,0,0,0,0,0,0}, + {0,0,0,0,0,0,0,0}, + {9,2,0,2,0,7,1,1}, + {19,5,1,5,2,16,3,2}, + {19,5,1,5,2,16,3,2}, + {30,9,3,9,4,25,6,4}, + {40,12,4,12,5,34,12,5}, + {40,12,4,12,5,34,12,5}, +}; + +/* + * Printing configuration + */ +/* Used for chipset type printing at boot time */ +static char* chipset_capability[] = { + "ATA", "ATA 16", + "ATA 33", "ATA 66", + "ATA 100 (1st gen)", "ATA 100 (2nd gen)", + "ATA 133 (1st gen)", "ATA 133 (2nd gen)" +}; + +#if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) +#include <linux/stat.h> +#include <linux/proc_fs.h> + +static u8 sis_proc = 0; + +static struct pci_dev *bmide_dev; + +static char* cable_type[] = { + "80 pins", + "40 pins" +}; + +static char* recovery_time[] ={ + "12 PCICLK", "1 PCICLK", + "2 PCICLK", "3 PCICLK", + "4 PCICLK", "5 PCICLCK", + "6 PCICLK", "7 PCICLCK", + "8 PCICLK", "9 PCICLCK", + "10 PCICLK", "11 PCICLK", + "13 PCICLK", "14 PCICLK", + "15 PCICLK", "15 PCICLK" +}; + +static char* active_time[] = { + "8 PCICLK", "1 PCICLCK", + "2 PCICLK", "3 PCICLK", + "4 PCICLK", "5 PCICLK", + "6 PCICLK", "12 PCICLK" +}; + +static char* cycle_time[] = { + "Reserved", "2 CLK", + "3 CLK", "4 CLK", + "5 CLK", "6 CLK", + "7 CLK", "8 CLK", + "9 CLK", "10 CLK", + "11 CLK", "12 CLK", + "13 CLK", "14 CLK", + "15 CLK", "16 CLK" +}; + +/* Generic add master or slave info function */ +static char* get_drives_info (char *buffer, u8 pos) +{ + u8 reg00, reg01, reg10, reg11; /* timing registers */ + u32 regdw0, regdw1; + char* p = buffer; + +/* Postwrite/Prefetch */ + if (chipset_family < ATA_133) { + pci_read_config_byte(bmide_dev, 0x4b, ®00); + p += sprintf(p, "Drive %d: Postwrite %s \t \t Postwrite %s\n", + pos, (reg00 & (0x10 << pos)) ? "Enabled" : "Disabled", + (reg00 & (0x40 << pos)) ? "Enabled" : "Disabled"); + p += sprintf(p, " Prefetch %s \t \t Prefetch %s\n", + (reg00 & (0x01 << pos)) ? "Enabled" : "Disabled", + (reg00 & (0x04 << pos)) ? "Enabled" : "Disabled"); + pci_read_config_byte(bmide_dev, 0x40+2*pos, ®00); + pci_read_config_byte(bmide_dev, 0x41+2*pos, ®01); + pci_read_config_byte(bmide_dev, 0x44+2*pos, ®10); + pci_read_config_byte(bmide_dev, 0x45+2*pos, ®11); + } else { + u32 reg54h; + u8 drive_pci = 0x40; + pci_read_config_dword(bmide_dev, 0x54, ®54h); + if (reg54h & 0x40000000) { + // Configuration space remapped to 0x70 + drive_pci = 0x70; + } + pci_read_config_dword(bmide_dev, (unsigned long)drive_pci+4*pos, ®dw0); + pci_read_config_dword(bmide_dev, (unsigned long)drive_pci+4*pos+8, ®dw1); + + p += sprintf(p, "Drive %d:\n", pos); + } + + +/* UDMA */ + if (chipset_family >= ATA_133) { + p += sprintf(p, " UDMA %s \t \t \t UDMA %s\n", + (regdw0 & 0x04) ? "Enabled" : "Disabled", + (regdw1 & 0x04) ? "Enabled" : "Disabled"); + p += sprintf(p, " UDMA Cycle Time %s \t UDMA Cycle Time %s\n", + cycle_time[(regdw0 & 0xF0) >> 4], + cycle_time[(regdw1 & 0xF0) >> 4]); + } else if (chipset_family >= ATA_33) { + p += sprintf(p, " UDMA %s \t \t \t UDMA %s\n", + (reg01 & 0x80) ? "Enabled" : "Disabled", + (reg11 & 0x80) ? "Enabled" : "Disabled"); + + p += sprintf(p, " UDMA Cycle Time "); + switch(chipset_family) { + case ATA_33: p += sprintf(p, cycle_time[(reg01 & 0x60) >> 5]); break; + case ATA_66: + case ATA_100a: p += sprintf(p, cycle_time[(reg01 & 0x70) >> 4]); break; + case ATA_100: + case ATA_133a: p += sprintf(p, cycle_time[reg01 & 0x0F]); break; + default: p += sprintf(p, "?"); break; + } + p += sprintf(p, " \t UDMA Cycle Time "); + switch(chipset_family) { + case ATA_33: p += sprintf(p, cycle_time[(reg11 & 0x60) >> 5]); break; + case ATA_66: + case ATA_100a: p += sprintf(p, cycle_time[(reg11 & 0x70) >> 4]); break; + case ATA_100: + case ATA_133a: p += sprintf(p, cycle_time[reg11 & 0x0F]); break; + default: p += sprintf(p, "?"); break; + } + p += sprintf(p, "\n"); + } + + + if (chipset_family < ATA_133) { /* else case TODO */ + +/* Data Active */ + p += sprintf(p, " Data Active Time "); + switch(chipset_family) { + case ATA_16: /* confirmed */ + case ATA_33: + case ATA_66: + case ATA_100a: p += sprintf(p, active_time[reg01 & 0x07]); break; + case ATA_100: + case ATA_133a: p += sprintf(p, active_time[(reg00 & 0x70) >> 4]); break; + default: p += sprintf(p, "?"); break; + } + p += sprintf(p, " \t Data Active Time "); + switch(chipset_family) { + case ATA_16: + case ATA_33: + case ATA_66: + case ATA_100a: p += sprintf(p, active_time[reg11 & 0x07]); break; + case ATA_100: + case ATA_133a: p += sprintf(p, active_time[(reg10 & 0x70) >> 4]); break; + default: p += sprintf(p, "?"); break; + } + p += sprintf(p, "\n"); + +/* Data Recovery */ + /* warning: may need (reg&0x07) for pre ATA66 chips */ + p += sprintf(p, " Data Recovery Time %s \t Data Recovery Time %s\n", + recovery_time[reg00 & 0x0f], recovery_time[reg10 & 0x0f]); + } + + return p; +} + +static char* get_masters_info(char* buffer) +{ + return get_drives_info(buffer, 0); +} + +static char* get_slaves_info(char* buffer) +{ + return get_drives_info(buffer, 1); +} + +/* Main get_info, called on /proc/ide/sis reads */ +static int sis_get_info (char *buffer, char **addr, off_t offset, int count) +{ + char *p = buffer; + int len; + u8 reg; + u16 reg2, reg3; + + p += sprintf(p, "\nSiS 5513 "); + switch(chipset_family) { + case ATA_16: p += sprintf(p, "DMA 16"); break; + case ATA_33: p += sprintf(p, "Ultra 33"); break; + case ATA_66: p += sprintf(p, "Ultra 66"); break; + case ATA_100a: + case ATA_100: p += sprintf(p, "Ultra 100"); break; + case ATA_133a: + case ATA_133: p += sprintf(p, "Ultra 133"); break; + default: p+= sprintf(p, "Unknown???"); break; + } + p += sprintf(p, " chipset\n"); + p += sprintf(p, "--------------- Primary Channel " + "---------------- Secondary Channel " + "-------------\n"); + +/* Status */ + pci_read_config_byte(bmide_dev, 0x4a, ®); + if (chipset_family == ATA_133) { + pci_read_config_word(bmide_dev, 0x50, ®2); + pci_read_config_word(bmide_dev, 0x52, ®3); + } + p += sprintf(p, "Channel Status: "); + if (chipset_family < ATA_66) { + p += sprintf(p, "%s \t \t \t \t %s\n", + (reg & 0x04) ? "On" : "Off", + (reg & 0x02) ? "On" : "Off"); + } else if (chipset_family < ATA_133) { + p += sprintf(p, "%s \t \t \t \t %s \n", + (reg & 0x02) ? "On" : "Off", + (reg & 0x04) ? "On" : "Off"); + } else { /* ATA_133 */ + p += sprintf(p, "%s \t \t \t \t %s \n", + (reg2 & 0x02) ? "On" : "Off", + (reg3 & 0x02) ? "On" : "Off"); + } + +/* Operation Mode */ + pci_read_config_byte(bmide_dev, 0x09, ®); + p += sprintf(p, "Operation Mode: %s \t \t \t %s \n", + (reg & 0x01) ? "Native" : "Compatible", + (reg & 0x04) ? "Native" : "Compatible"); + +/* 80-pin cable ? */ + if (chipset_family >= ATA_133) { + p += sprintf(p, "Cable Type: %s \t \t \t %s\n", + (reg2 & 0x01) ? cable_type[1] : cable_type[0], + (reg3 & 0x01) ? cable_type[1] : cable_type[0]); + } else if (chipset_family > ATA_33) { + pci_read_config_byte(bmide_dev, 0x48, ®); + p += sprintf(p, "Cable Type: %s \t \t \t %s\n", + (reg & 0x10) ? cable_type[1] : cable_type[0], + (reg & 0x20) ? cable_type[1] : cable_type[0]); + } + +/* Prefetch Count */ + if (chipset_family < ATA_133) { + pci_read_config_word(bmide_dev, 0x4c, ®2); + pci_read_config_word(bmide_dev, 0x4e, ®3); + p += sprintf(p, "Prefetch Count: %d \t \t \t \t %d\n", + reg2, reg3); + } + + p = get_masters_info(p); + p = get_slaves_info(p); + + len = (p - buffer) - offset; + *addr = buffer + offset; + + return len > count ? count : len; +} +#endif /* defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) */ + +static u8 sis5513_ratemask (ide_drive_t *drive) +{ + u8 rates[] = { 0, 0, 1, 2, 3, 3, 4, 4 }; + u8 mode = rates[chipset_family]; + + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + return mode; +} + +/* + * Configuration functions + */ +/* Enables per-drive prefetch and postwrite */ +static void config_drive_art_rwp (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + + u8 reg4bh = 0; + u8 rw_prefetch = (0x11 << drive->dn); + + if (drive->media != ide_disk) + return; + pci_read_config_byte(dev, 0x4b, ®4bh); + + if ((reg4bh & rw_prefetch) != rw_prefetch) + pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch); +} + + +/* Set per-drive active and recovery time */ +static void config_art_rwp_pio (ide_drive_t *drive, u8 pio) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + + u8 timing, drive_pci, test1, test2; + + u16 eide_pio_timing[6] = {600, 390, 240, 180, 120, 90}; + u16 xfer_pio = drive->id->eide_pio_modes; + + config_drive_art_rwp(drive); + pio = ide_get_best_pio_mode(drive, 255, pio, NULL); + + if (xfer_pio> 4) + xfer_pio = 0; + + if (drive->id->eide_pio_iordy > 0) { + for (xfer_pio = 5; + (xfer_pio > 0) && + (drive->id->eide_pio_iordy > eide_pio_timing[xfer_pio]); + xfer_pio--); + } else { + xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 : + (drive->id->eide_pio_modes & 2) ? 0x04 : + (drive->id->eide_pio_modes & 1) ? 0x03 : xfer_pio; + } + + timing = (xfer_pio >= pio) ? xfer_pio : pio; + + /* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */ + drive_pci = 0x40; + /* In SiS962 case drives sit at (0x40 or 0x70) + 8*drive->dn) */ + if (chipset_family >= ATA_133) { + u32 reg54h; + pci_read_config_dword(dev, 0x54, ®54h); + if (reg54h & 0x40000000) drive_pci = 0x70; + drive_pci += ((drive->dn)*0x4); + } else { + drive_pci += ((drive->dn)*0x2); + } + + /* register layout changed with newer ATA100 chips */ + if (chipset_family < ATA_100) { + pci_read_config_byte(dev, drive_pci, &test1); + pci_read_config_byte(dev, drive_pci+1, &test2); + + /* Clear active and recovery timings */ + test1 &= ~0x0F; + test2 &= ~0x07; + + switch(timing) { + case 4: test1 |= 0x01; test2 |= 0x03; break; + case 3: test1 |= 0x03; test2 |= 0x03; break; + case 2: test1 |= 0x04; test2 |= 0x04; break; + case 1: test1 |= 0x07; test2 |= 0x06; break; + default: break; + } + pci_write_config_byte(dev, drive_pci, test1); + pci_write_config_byte(dev, drive_pci+1, test2); + } else if (chipset_family < ATA_133) { + switch(timing) { /* active recovery + v v */ + case 4: test1 = 0x30|0x01; break; + case 3: test1 = 0x30|0x03; break; + case 2: test1 = 0x40|0x04; break; + case 1: test1 = 0x60|0x07; break; + default: break; + } + pci_write_config_byte(dev, drive_pci, test1); + } else { /* ATA_133 */ + u32 test3; + pci_read_config_dword(dev, drive_pci, &test3); + test3 &= 0xc0c00fff; + if (test3 & 0x08) { + test3 |= (unsigned long)ini_time_value[ATA_133][timing] << 12; + test3 |= (unsigned long)act_time_value[ATA_133][timing] << 16; + test3 |= (unsigned long)rco_time_value[ATA_133][timing] << 24; + } else { + test3 |= (unsigned long)ini_time_value[ATA_100][timing] << 12; + test3 |= (unsigned long)act_time_value[ATA_100][timing] << 16; + test3 |= (unsigned long)rco_time_value[ATA_100][timing] << 24; + } + pci_write_config_dword(dev, drive_pci, test3); + } +} + +static int config_chipset_for_pio (ide_drive_t *drive, u8 pio) +{ + if (pio == 255) + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; + config_art_rwp_pio(drive, pio); + return ide_config_drive_speed(drive, XFER_PIO_0 + min_t(u8, pio, 4)); +} + +static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + + u8 drive_pci, reg, speed; + u32 regdw; + + speed = ide_rate_filter(sis5513_ratemask(drive), xferspeed); + + /* See config_art_rwp_pio for drive pci config registers */ + drive_pci = 0x40; + if (chipset_family >= ATA_133) { + u32 reg54h; + pci_read_config_dword(dev, 0x54, ®54h); + if (reg54h & 0x40000000) drive_pci = 0x70; + drive_pci += ((drive->dn)*0x4); + pci_read_config_dword(dev, (unsigned long)drive_pci, ®dw); + /* Disable UDMA bit for non UDMA modes on UDMA chips */ + if (speed < XFER_UDMA_0) { + regdw &= 0xfffffffb; + pci_write_config_dword(dev, (unsigned long)drive_pci, regdw); + } + + } else { + drive_pci += ((drive->dn)*0x2); + pci_read_config_byte(dev, drive_pci+1, ®); + /* Disable UDMA bit for non UDMA modes on UDMA chips */ + if ((speed < XFER_UDMA_0) && (chipset_family > ATA_16)) { + reg &= 0x7F; + pci_write_config_byte(dev, drive_pci+1, reg); + } + } + + /* Config chip for mode */ + switch(speed) { + case XFER_UDMA_6: + case XFER_UDMA_5: + case XFER_UDMA_4: + case XFER_UDMA_3: + case XFER_UDMA_2: + case XFER_UDMA_1: + case XFER_UDMA_0: + if (chipset_family >= ATA_133) { + regdw |= 0x04; + regdw &= 0xfffff00f; + /* check if ATA133 enable */ + if (regdw & 0x08) { + regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4; + regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8; + } else { + /* if ATA133 disable, we should not set speed above UDMA5 */ + if (speed > XFER_UDMA_5) + speed = XFER_UDMA_5; + regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4; + regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8; + } + pci_write_config_dword(dev, (unsigned long)drive_pci, regdw); + } else { + /* Force the UDMA bit on if we want to use UDMA */ + reg |= 0x80; + /* clean reg cycle time bits */ + reg &= ~((0xFF >> (8 - cycle_time_range[chipset_family])) + << cycle_time_offset[chipset_family]); + /* set reg cycle time bits */ + reg |= cycle_time_value[chipset_family][speed-XFER_UDMA_0] + << cycle_time_offset[chipset_family]; + pci_write_config_byte(dev, drive_pci+1, reg); + } + break; + case XFER_MW_DMA_2: + case XFER_MW_DMA_1: + case XFER_MW_DMA_0: + case XFER_SW_DMA_2: + case XFER_SW_DMA_1: + case XFER_SW_DMA_0: + break; + case XFER_PIO_4: return((int) config_chipset_for_pio(drive, 4)); + case XFER_PIO_3: return((int) config_chipset_for_pio(drive, 3)); + case XFER_PIO_2: return((int) config_chipset_for_pio(drive, 2)); + case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1)); + case XFER_PIO_0: + default: return((int) config_chipset_for_pio(drive, 0)); + } + + return ((int) ide_config_drive_speed(drive, speed)); +} + +static void sis5513_tune_drive (ide_drive_t *drive, u8 pio) +{ + (void) config_chipset_for_pio(drive, pio); +} + +/* + * ((id->hw_config & 0x4000|0x2000) && (HWIF(drive)->udma_four)) + */ +static int config_chipset_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, sis5513_ratemask(drive)); + +#ifdef DEBUG + printk("SIS5513: config_chipset_for_dma, drive %d, ultra %x\n", + drive->dn, drive->id->dma_ultra); +#endif + + if (!(speed)) + return 0; + + sis5513_tune_chipset(drive, speed); + return ide_dma_enable(drive); +} + +static int sis5513_config_drive_xfer_rate (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + drive->init_speed = 0; + + if (id && (id->capability & 1) && drive->autodma) { + + if (ide_use_dma(drive)) { + if (config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + sis5513_tune_drive(drive, 5); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +/* initiates/aborts (U)DMA read/write operations on a drive. */ +static int sis5513_config_xfer_rate (ide_drive_t *drive) +{ + config_drive_art_rwp(drive); + config_art_rwp_pio(drive, 5); + return sis5513_config_drive_xfer_rate(drive); +} + +/* + Future simpler config_xfer_rate : + When ide_find_best_mode is made bad-drive aware + - remove config_drive_xfer_rate and config_chipset_for_dma, + - replace config_xfer_rate with the following + +static int sis5513_config_xfer_rate (ide_drive_t *drive) +{ + u16 w80 = HWIF(drive)->udma_four; + u16 speed; + + config_drive_art_rwp(drive); + config_art_rwp_pio(drive, 5); + + speed = ide_find_best_mode(drive, + XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA | + (chipset_family >= ATA_33 ? XFER_UDMA : 0) | + (w80 && chipset_family >= ATA_66 ? XFER_UDMA_66 : 0) | + (w80 && chipset_family >= ATA_100a ? XFER_UDMA_100 : 0) | + (w80 && chipset_family >= ATA_133a ? XFER_UDMA_133 : 0)); + + sis5513_tune_chipset(drive, speed); + + if (drive->autodma && (speed & XFER_MODE) != XFER_PIO) + return HWIF(drive)->ide_dma_on(drive); + return HWIF(drive)->ide_dma_off_quietly(drive); +} +*/ + +/* Chip detection and general config */ +static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char *name) +{ + struct pci_dev *host; + int i = 0; + + chipset_family = 0; + + for (i = 0; i < ARRAY_SIZE(SiSHostChipInfo) && !chipset_family; i++) { + + host = pci_find_device(PCI_VENDOR_ID_SI, SiSHostChipInfo[i].host_id, NULL); + + if (!host) + continue; + + chipset_family = SiSHostChipInfo[i].chipset_family; + + /* Special case for SiS630 : 630S/ET is ATA_100a */ + if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) { + u8 hostrev; + pci_read_config_byte(host, PCI_REVISION_ID, &hostrev); + if (hostrev >= 0x30) + chipset_family = ATA_100a; + } + + printk(KERN_INFO "SIS5513: %s %s controller\n", + SiSHostChipInfo[i].name, chipset_capability[chipset_family]); + } + + if (!chipset_family) { /* Belongs to pci-quirks */ + + u32 idemisc; + u16 trueid; + + /* Disable ID masking and register remapping */ + pci_read_config_dword(dev, 0x54, &idemisc); + pci_write_config_dword(dev, 0x54, (idemisc & 0x7fffffff)); + pci_read_config_word(dev, PCI_DEVICE_ID, &trueid); + pci_write_config_dword(dev, 0x54, idemisc); + + if (trueid == 0x5518) { + printk(KERN_INFO "SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller\n"); + chipset_family = ATA_133; + + /* Check for 5513 compability mapping + * We must use this, else the port enabled code will fail, + * as it expects the enablebits at 0x4a. + */ + if ((idemisc & 0x40000000) == 0) { + pci_write_config_dword(dev, 0x54, idemisc | 0x40000000); + printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n"); + } + } + } + + if (!chipset_family) { /* Belongs to pci-quirks */ + + struct pci_dev *lpc_bridge; + u16 trueid; + u8 prefctl; + u8 idecfg; + u8 sbrev; + + pci_read_config_byte(dev, 0x4a, &idecfg); + pci_write_config_byte(dev, 0x4a, idecfg | 0x10); + pci_read_config_word(dev, PCI_DEVICE_ID, &trueid); + pci_write_config_byte(dev, 0x4a, idecfg); + + if (trueid == 0x5517) { /* SiS 961/961B */ + + lpc_bridge = pci_find_slot(0x00, 0x10); /* Bus 0, Dev 2, Fn 0 */ + pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev); + pci_read_config_byte(dev, 0x49, &prefctl); + + if (sbrev == 0x10 && (prefctl & 0x80)) { + printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n"); + chipset_family = ATA_133a; + } else { + printk(KERN_INFO "SIS5513: SiS 961 MuTIOL IDE UDMA100 controller\n"); + chipset_family = ATA_100; + } + } + } + + if (!chipset_family) + return -1; + + /* Make general config ops here + 1/ tell IDE channels to operate in Compatibility mode only + 2/ tell old chips to allow per drive IDE timings */ + + { + u8 reg; + u16 regw; + + switch(chipset_family) { + case ATA_133: + /* SiS962 operation mode */ + pci_read_config_word(dev, 0x50, ®w); + if (regw & 0x08) + pci_write_config_word(dev, 0x50, regw&0xfff7); + pci_read_config_word(dev, 0x52, ®w); + if (regw & 0x08) + pci_write_config_word(dev, 0x52, regw&0xfff7); + break; + case ATA_133a: + case ATA_100: + /* Fixup latency */ + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80); + /* Set compatibility bit */ + pci_read_config_byte(dev, 0x49, ®); + if (!(reg & 0x01)) { + pci_write_config_byte(dev, 0x49, reg|0x01); + } + break; + case ATA_100a: + case ATA_66: + /* Fixup latency */ + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10); + + /* On ATA_66 chips the bit was elsewhere */ + pci_read_config_byte(dev, 0x52, ®); + if (!(reg & 0x04)) { + pci_write_config_byte(dev, 0x52, reg|0x04); + } + break; + case ATA_33: + /* On ATA_33 we didn't have a single bit to set */ + pci_read_config_byte(dev, 0x09, ®); + if ((reg & 0x0f) != 0x00) { + pci_write_config_byte(dev, 0x09, reg&0xf0); + } + case ATA_16: + /* force per drive recovery and active timings + needed on ATA_33 and below chips */ + pci_read_config_byte(dev, 0x52, ®); + if (!(reg & 0x08)) { + pci_write_config_byte(dev, 0x52, reg|0x08); + } + break; + } + +#if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) + if (!sis_proc) { + sis_proc = 1; + bmide_dev = dev; + ide_pci_create_host_proc("sis", sis_get_info); + } +#endif + } + + return 0; +} + +static unsigned int __init ata66_sis5513 (ide_hwif_t *hwif) +{ + u8 ata66 = 0; + + if (chipset_family >= ATA_133) { + u16 regw = 0; + u16 reg_addr = hwif->channel ? 0x52: 0x50; + pci_read_config_word(hwif->pci_dev, reg_addr, ®w); + ata66 = (regw & 0x8000) ? 0 : 1; + } else if (chipset_family >= ATA_66) { + u8 reg48h = 0; + u8 mask = hwif->channel ? 0x20 : 0x10; + pci_read_config_byte(hwif->pci_dev, 0x48, ®48h); + ata66 = (reg48h & mask) ? 0 : 1; + } + return ata66; +} + +static void __init init_hwif_sis5513 (ide_hwif_t *hwif) +{ + hwif->autodma = 0; + + if (!hwif->irq) + hwif->irq = hwif->channel ? 15 : 14; + + hwif->tuneproc = &sis5513_tune_drive; + hwif->speedproc = &sis5513_tune_chipset; + + if (!(hwif->dma_base)) { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + return; + } + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x7f; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + if (!chipset_family) + return; + + if (!(hwif->udma_four)) + hwif->udma_four = ata66_sis5513(hwif); + + if (chipset_family > ATA_16) { + hwif->ide_dma_check = &sis5513_config_xfer_rate; + if (!noautodma) + hwif->autodma = 1; + } + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; + return; +} + +static ide_pci_device_t sis5513_chipset __devinitdata = { + .name = "SIS5513", + .init_chipset = init_chipset_sis5513, + .init_hwif = init_hwif_sis5513, + .channels = 2, + .autodma = NOAUTODMA, + .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, + .bootable = ON_BOARD, +}; + +static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &sis5513_chipset); +} + +static struct pci_device_id sis5513_pci_tbl[] = { + { PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5518, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl); + +static struct pci_driver driver = { + .name = "SIS_IDE", + .id_table = sis5513_pci_tbl, + .probe = sis5513_init_one, +}; + +static int sis5513_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(sis5513_ide_init); + +MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik"); +MODULE_DESCRIPTION("PCI driver module for SIS IDE"); +MODULE_LICENSE("GPL"); + +/* + * TODO: + * - CLEANUP + * - Use drivers/ide/ide-timing.h ! + * - More checks in the config registers (force values instead of + * relying on the BIOS setting them correctly). + * - Further optimisations ? + * . for example ATA66+ regs 0x48 & 0x4A + */ diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c new file mode 100644 index 0000000..1d970a0 --- /dev/null +++ b/drivers/ide/pci/sl82c105.c @@ -0,0 +1,516 @@ +/* + * linux/drivers/ide/pci/sl82c105.c + * + * SL82C105/Winbond 553 IDE driver + * + * Maintainer unknown. + * + * Drive tuning added from Rebel.com's kernel sources + * -- Russell King (15/11/98) linux@arm.linux.org.uk + * + * Merge in Russell's HW workarounds, fix various problems + * with the timing registers setup. + * -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/pci.h> +#include <linux/ide.h> + +#include <asm/io.h> +#include <asm/dma.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(arg) printk arg +#else +#define DBG(fmt,...) +#endif +/* + * SL82C105 PCI config register 0x40 bits. + */ +#define CTRL_IDE_IRQB (1 << 30) +#define CTRL_IDE_IRQA (1 << 28) +#define CTRL_LEGIRQ (1 << 11) +#define CTRL_P1F16 (1 << 5) +#define CTRL_P1EN (1 << 4) +#define CTRL_P0F16 (1 << 1) +#define CTRL_P0EN (1 << 0) + +/* + * Convert a PIO mode and cycle time to the required on/off + * times for the interface. This has protection against run-away + * timings. + */ +static unsigned int get_timing_sl82c105(ide_pio_data_t *p) +{ + unsigned int cmd_on; + unsigned int cmd_off; + + cmd_on = (ide_pio_timings[p->pio_mode].active_time + 29) / 30; + cmd_off = (p->cycle_time - 30 * cmd_on + 29) / 30; + + if (cmd_on > 32) + cmd_on = 32; + if (cmd_on == 0) + cmd_on = 1; + + if (cmd_off > 32) + cmd_off = 32; + if (cmd_off == 0) + cmd_off = 1; + + return (cmd_on - 1) << 8 | (cmd_off - 1) | (p->use_iordy ? 0x40 : 0x00); +} + +/* + * Configure the drive and chipset for PIO + */ +static void config_for_pio(ide_drive_t *drive, int pio, int report, int chipset_only) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + ide_pio_data_t p; + u16 drv_ctrl = 0x909; + unsigned int xfer_mode, reg; + + DBG(("config_for_pio(drive:%s, pio:%d, report:%d, chipset_only:%d)\n", + drive->name, pio, report, chipset_only)); + + reg = (hwif->channel ? 0x4c : 0x44) + (drive->select.b.unit ? 4 : 0); + + pio = ide_get_best_pio_mode(drive, pio, 5, &p); + + xfer_mode = XFER_PIO_0 + pio; + + if (chipset_only || ide_config_drive_speed(drive, xfer_mode) == 0) { + drv_ctrl = get_timing_sl82c105(&p); + drive->pio_speed = xfer_mode; + } else + drive->pio_speed = XFER_PIO_0; + + if (drive->using_dma == 0) { + /* + * If we are actually using MW DMA, then we can not + * reprogram the interface drive control register. + */ + pci_write_config_word(dev, reg, drv_ctrl); + pci_read_config_word(dev, reg, &drv_ctrl); + + if (report) { + printk("%s: selected %s (%dns) (%04X)\n", drive->name, + ide_xfer_verbose(xfer_mode), p.cycle_time, drv_ctrl); + } + } +} + +/* + * Configure the drive and the chipset for DMA + */ +static int config_for_dma (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + unsigned int reg; + + DBG(("config_for_dma(drive:%s)\n", drive->name)); + + reg = (hwif->channel ? 0x4c : 0x44) + (drive->select.b.unit ? 4 : 0); + + if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0) + return 1; + + pci_write_config_word(dev, reg, 0x0240); + + return 0; +} + +/* + * Check to see if the drive and + * chipset is capable of DMA mode + */ + +static int sl82c105_check_drive (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + + DBG(("sl82c105_check_drive(drive:%s)\n", drive->name)); + + do { + struct hd_driveid *id = drive->id; + + if (!drive->autodma) + break; + + if (!id || !(id->capability & 1)) + break; + + /* Consult the list of known "bad" drives */ + if (__ide_dma_bad_drive(drive)) + break; + + if (id->field_valid & 2) { + if ((id->dma_mword & hwif->mwdma_mask) || + (id->dma_1word & hwif->swdma_mask)) + return hwif->ide_dma_on(drive); + } + + if (__ide_dma_good_drive(drive)) + return hwif->ide_dma_on(drive); + } while (0); + + return hwif->ide_dma_off_quietly(drive); +} + +/* + * The SL82C105 holds off all IDE interrupts while in DMA mode until + * all DMA activity is completed. Sometimes this causes problems (eg, + * when the drive wants to report an error condition). + * + * 0x7e is a "chip testing" register. Bit 2 resets the DMA controller + * state machine. We need to kick this to work around various bugs. + */ +static inline void sl82c105_reset_host(struct pci_dev *dev) +{ + u16 val; + + pci_read_config_word(dev, 0x7e, &val); + pci_write_config_word(dev, 0x7e, val | (1 << 2)); + pci_write_config_word(dev, 0x7e, val & ~(1 << 2)); +} + +/* + * If we get an IRQ timeout, it might be that the DMA state machine + * got confused. Fix from Todd Inglett. Details from Winbond. + * + * This function is called when the IDE timer expires, the drive + * indicates that it is READY, and we were waiting for DMA to complete. + */ +static int sl82c105_ide_dma_lost_irq(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA; + unsigned long dma_base = hwif->dma_base; + + printk("sl82c105: lost IRQ: resetting host\n"); + + /* + * Check the raw interrupt from the drive. + */ + pci_read_config_dword(dev, 0x40, &val); + if (val & mask) + printk("sl82c105: drive was requesting IRQ, but host lost it\n"); + + /* + * Was DMA enabled? If so, disable it - we're resetting the + * host. The IDE layer will be handling the drive for us. + */ + val = hwif->INB(dma_base); + if (val & 1) { + outb(val & ~1, dma_base); + printk("sl82c105: DMA was enabled\n"); + } + + sl82c105_reset_host(dev); + + /* ide_dmaproc would return 1, so we do as well */ + return 1; +} + +/* + * ATAPI devices can cause the SL82C105 DMA state machine to go gaga. + * Winbond recommend that the DMA state machine is reset prior to + * setting the bus master DMA enable bit. + * + * The generic IDE core will have disabled the BMEN bit before this + * function is called. + */ +static void sl82c105_ide_dma_start(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + + sl82c105_reset_host(dev); + ide_dma_start(drive); +} + +static int sl82c105_ide_dma_timeout(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + + DBG(("sl82c105_ide_dma_timeout(drive:%s)\n", drive->name)); + + sl82c105_reset_host(dev); + return __ide_dma_timeout(drive); +} + +static int sl82c105_ide_dma_on (ide_drive_t *drive) +{ + DBG(("sl82c105_ide_dma_on(drive:%s)\n", drive->name)); + + if (config_for_dma(drive)) { + config_for_pio(drive, 4, 0, 0); + return HWIF(drive)->ide_dma_off_quietly(drive); + } + printk(KERN_INFO "%s: DMA enabled\n", drive->name); + return __ide_dma_on(drive); +} + +static int sl82c105_ide_dma_off_quietly (ide_drive_t *drive) +{ + u8 speed = XFER_PIO_0; + int rc; + + DBG(("sl82c105_ide_dma_off_quietly(drive:%s)\n", drive->name)); + + rc = __ide_dma_off_quietly(drive); + if (drive->pio_speed) + speed = drive->pio_speed - XFER_PIO_0; + config_for_pio(drive, speed, 0, 1); + drive->current_speed = drive->pio_speed; + + return rc; +} + +/* + * Ok, that is nasty, but we must make sure the DMA timings + * won't be used for a PIO access. The solution here is + * to make sure the 16 bits mode is diabled on the channel + * when DMA is enabled, thus causing the chip to use PIO0 + * timings for those operations. + */ +static void sl82c105_selectproc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u32 val, old, mask; + + //DBG(("sl82c105_selectproc(drive:%s)\n", drive->name)); + + mask = hwif->channel ? CTRL_P1F16 : CTRL_P0F16; + old = val = *((u32 *)&hwif->hwif_data); + if (drive->using_dma) + val &= ~mask; + else + val |= mask; + if (old != val) { + pci_write_config_dword(dev, 0x40, val); + *((u32 *)&hwif->hwif_data) = val; + } +} + +/* + * ATA reset will clear the 16 bits mode in the control + * register, we need to update our cache + */ +static void sl82c105_resetproc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u32 val; + + DBG(("sl82c105_resetproc(drive:%s)\n", drive->name)); + + pci_read_config_dword(dev, 0x40, &val); + *((u32 *)&hwif->hwif_data) = val; +} + +/* + * We only deal with PIO mode here - DMA mode 'using_dma' is not + * initialised at the point that this function is called. + */ +static void tune_sl82c105(ide_drive_t *drive, u8 pio) +{ + DBG(("tune_sl82c105(drive:%s)\n", drive->name)); + + config_for_pio(drive, pio, 1, 0); + + /* + * We support 32-bit I/O on this interface, and it + * doesn't have problems with interrupts. + */ + drive->io_32bit = 1; + drive->unmask = 1; +} + +/* + * Return the revision of the Winbond bridge + * which this function is part of. + */ +static unsigned int sl82c105_bridge_revision(struct pci_dev *dev) +{ + struct pci_dev *bridge; + u8 rev; + + /* + * The bridge should be part of the same device, but function 0. + */ + bridge = pci_find_slot(dev->bus->number, + PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); + if (!bridge) + return -1; + + /* + * Make sure it is a Winbond 553 and is an ISA bridge. + */ + if (bridge->vendor != PCI_VENDOR_ID_WINBOND || + bridge->device != PCI_DEVICE_ID_WINBOND_83C553 || + bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) + return -1; + + /* + * We need to find function 0's revision, not function 1 + */ + pci_read_config_byte(bridge, PCI_REVISION_ID, &rev); + + return rev; +} + +/* + * Enable the PCI device + * + * --BenH: It's arch fixup code that should enable channels that + * have not been enabled by firmware. I decided we can still enable + * channel 0 here at least, but channel 1 has to be enabled by + * firmware or arch code. We still set both to 16 bits mode. + */ +static unsigned int __init init_chipset_sl82c105(struct pci_dev *dev, const char *msg) +{ + u32 val; + + DBG(("init_chipset_sl82c105()\n")); + + pci_read_config_dword(dev, 0x40, &val); + val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; + pci_write_config_dword(dev, 0x40, val); + + return dev->irq; +} + +static void __init init_dma_sl82c105(ide_hwif_t *hwif, unsigned long dma_base) +{ + unsigned int rev; + u8 dma_state; + + DBG(("init_dma_sl82c105(hwif: ide%d, dma_base: 0x%08x)\n", hwif->index, dma_base)); + + hwif->autodma = 0; + + if (!dma_base) + return; + + dma_state = hwif->INB(dma_base + 2); + rev = sl82c105_bridge_revision(hwif->pci_dev); + if (rev <= 5) { + printk(" %s: Winbond 553 bridge revision %d, BM-DMA disabled\n", + hwif->name, rev); + dma_state &= ~0x60; + } else { + dma_state |= 0x60; + if (!noautodma) + hwif->autodma = 1; + } + hwif->OUTB(dma_state, dma_base + 2); + + ide_setup_dma(hwif, dma_base, 8); +} + +/* + * Initialise the chip + */ + +static void __init init_hwif_sl82c105(ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + u32 val; + + DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); + + hwif->tuneproc = tune_sl82c105; + hwif->selectproc = sl82c105_selectproc; + hwif->resetproc = sl82c105_resetproc; + + /* Default to PIO 0 for fallback unless tuned otherwise, + * we always autotune PIO, this is done before DMA is + * checked, so there is no risk of accidentally disabling + * DMA + */ + hwif->drives[0].pio_speed = XFER_PIO_0; + hwif->drives[0].autotune = 1; + hwif->drives[1].pio_speed = XFER_PIO_1; + hwif->drives[1].autotune = 1; + + pci_read_config_dword(dev, 0x40, &val); + *((u32 *)&hwif->hwif_data) = val; + + if (!hwif->dma_base) + return; + + hwif->atapi_dma = 1; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + +#ifdef CONFIG_BLK_DEV_IDEDMA + hwif->ide_dma_check = &sl82c105_check_drive; + hwif->ide_dma_on = &sl82c105_ide_dma_on; + hwif->ide_dma_off_quietly = &sl82c105_ide_dma_off_quietly; + hwif->ide_dma_lostirq = &sl82c105_ide_dma_lost_irq; + hwif->dma_start = &sl82c105_ide_dma_start; + hwif->ide_dma_timeout = &sl82c105_ide_dma_timeout; + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +#endif /* CONFIG_BLK_DEV_IDEDMA */ +} + +static ide_pci_device_t sl82c105_chipset __devinitdata = { + .name = "W82C105", + .init_chipset = init_chipset_sl82c105, + .init_hwif = init_hwif_sl82c105, + .init_dma = init_dma_sl82c105, + .channels = 2, + .autodma = NOAUTODMA, + .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}}, + .bootable = ON_BOARD, +}; + +static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &sl82c105_chipset); +} + +static struct pci_device_id sl82c105_pci_tbl[] = { + { PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl); + +static struct pci_driver driver = { + .name = "W82C105_IDE", + .id_table = sl82c105_pci_tbl, + .probe = sl82c105_init_one, +}; + +static int sl82c105_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(sl82c105_ide_init); + +MODULE_DESCRIPTION("PCI driver module for W82C105 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c new file mode 100644 index 0000000..7fbf363 --- /dev/null +++ b/drivers/ide/pci/slc90e66.c @@ -0,0 +1,273 @@ +/* + * linux/drivers/ide/pci/slc90e66.c Version 0.11 September 11, 2002 + * + * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> + * + * This a look-a-like variation of the ICH0 PIIX4 Ultra-66, + * but this keeps the ISA-Bridge and slots alive. + * + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/delay.h> +#include <linux/init.h> + +#include <asm/io.h> + +static u8 slc90e66_ratemask (ide_drive_t *drive) +{ + u8 mode = 2; + + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + return mode; +} + +static u8 slc90e66_dma_2_pio (u8 xfer_rate) { + switch(xfer_rate) { + case XFER_UDMA_4: + case XFER_UDMA_3: + case XFER_UDMA_2: + case XFER_UDMA_1: + case XFER_UDMA_0: + case XFER_MW_DMA_2: + case XFER_PIO_4: + return 4; + case XFER_MW_DMA_1: + case XFER_PIO_3: + return 3; + case XFER_SW_DMA_2: + case XFER_PIO_2: + return 2; + case XFER_MW_DMA_0: + case XFER_SW_DMA_1: + case XFER_SW_DMA_0: + case XFER_PIO_1: + case XFER_PIO_0: + case XFER_PIO_SLOW: + default: + return 0; + } +} + +/* + * Based on settings done by AMI BIOS + * (might be useful if drive is not registered in CMOS for any reason). + */ +static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + int is_slave = (&hwif->drives[1] == drive); + int master_port = hwif->channel ? 0x42 : 0x40; + int slave_port = 0x44; + unsigned long flags; + u16 master_data; + u8 slave_data; + /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pio = ide_get_best_pio_mode(drive, pio, 5, NULL); + spin_lock_irqsave(&ide_lock, flags); + pci_read_config_word(dev, master_port, &master_data); + if (is_slave) { + master_data = master_data | 0x4000; + if (pio > 1) + /* enable PPE, IE and TIME */ + master_data = master_data | 0x0070; + pci_read_config_byte(dev, slave_port, &slave_data); + slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0); + slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0)); + } else { + master_data = master_data & 0xccf8; + if (pio > 1) + /* enable PPE, IE and TIME */ + master_data = master_data | 0x0007; + master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8); + } + pci_write_config_word(dev, master_port, master_data); + if (is_slave) + pci_write_config_byte(dev, slave_port, slave_data); + spin_unlock_irqrestore(&ide_lock, flags); +} + +static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 maslave = hwif->channel ? 0x42 : 0x40; + u8 speed = ide_rate_filter(slc90e66_ratemask(drive), xferspeed); + int sitre = 0, a_speed = 7 << (drive->dn * 4); + int u_speed = 0, u_flag = 1 << drive->dn; + u16 reg4042, reg44, reg48, reg4a; + + pci_read_config_word(dev, maslave, ®4042); + sitre = (reg4042 & 0x4000) ? 1 : 0; + pci_read_config_word(dev, 0x44, ®44); + pci_read_config_word(dev, 0x48, ®48); + pci_read_config_word(dev, 0x4a, ®4a); + + switch(speed) { +#ifdef CONFIG_BLK_DEV_IDEDMA + case XFER_UDMA_4: u_speed = 4 << (drive->dn * 4); break; + case XFER_UDMA_3: u_speed = 3 << (drive->dn * 4); break; + case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break; + case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break; + case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break; + case XFER_MW_DMA_2: + case XFER_MW_DMA_1: + case XFER_SW_DMA_2: break; +#endif /* CONFIG_BLK_DEV_IDEDMA */ + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_0: break; + default: return -1; + } + + if (speed >= XFER_UDMA_0) { + if (!(reg48 & u_flag)) + pci_write_config_word(dev, 0x48, reg48|u_flag); + /* FIXME: (reg4a & a_speed) ? */ + if ((reg4a & u_speed) != u_speed) { + pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); + pci_read_config_word(dev, 0x4a, ®4a); + pci_write_config_word(dev, 0x4a, reg4a|u_speed); + } + } else { + if (reg48 & u_flag) + pci_write_config_word(dev, 0x48, reg48 & ~u_flag); + if (reg4a & a_speed) + pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); + } + + slc90e66_tune_drive(drive, slc90e66_dma_2_pio(speed)); + return (ide_config_drive_speed(drive, speed)); +} + +#ifdef CONFIG_BLK_DEV_IDEDMA +static int slc90e66_config_drive_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, slc90e66_ratemask(drive)); + + if (!(speed)) { + u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL); + speed = slc90e66_dma_2_pio(XFER_PIO_0 + tspeed); + } + + (void) slc90e66_tune_chipset(drive, speed); + return ide_dma_enable(drive); +} + +static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + drive->init_speed = 0; + + if (id && (id->capability & 1) && drive->autodma) { + + if (ide_use_dma(drive)) { + if (slc90e66_config_drive_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + hwif->tuneproc(drive, 5); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} +#endif /* CONFIG_BLK_DEV_IDEDMA */ + +static void __init init_hwif_slc90e66 (ide_hwif_t *hwif) +{ + u8 reg47 = 0; + u8 mask = hwif->channel ? 0x01 : 0x02; /* bit0:Primary */ + + hwif->autodma = 0; + + if (!hwif->irq) + hwif->irq = hwif->channel ? 15 : 14; + + hwif->speedproc = &slc90e66_tune_chipset; + hwif->tuneproc = &slc90e66_tune_drive; + + pci_read_config_byte(hwif->pci_dev, 0x47, ®47); + + if (!hwif->dma_base) { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + return; + } + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x1f; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + +#ifdef CONFIG_BLK_DEV_IDEDMA + if (!(hwif->udma_four)) + /* bit[0(1)]: 0:80, 1:40 */ + hwif->udma_four = (reg47 & mask) ? 0 : 1; + + hwif->ide_dma_check = &slc90e66_config_drive_xfer_rate; + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +#endif /* !CONFIG_BLK_DEV_IDEDMA */ +} + +static ide_pci_device_t slc90e66_chipset __devinitdata = { + .name = "SLC90E66", + .init_hwif = init_hwif_slc90e66, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, + .bootable = ON_BOARD, +}; + +static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &slc90e66_chipset); +} + +static struct pci_device_id slc90e66_pci_tbl[] = { + { PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl); + +static struct pci_driver driver = { + .name = "SLC90e66_IDE", + .id_table = slc90e66_pci_tbl, + .probe = slc90e66_init_one, +}; + +static int slc90e66_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(slc90e66_ide_init); + +MODULE_AUTHOR("Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for SLC90E66 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c new file mode 100644 index 0000000..a1df2bf --- /dev/null +++ b/drivers/ide/pci/triflex.c @@ -0,0 +1,188 @@ +/* + * triflex.c + * + * IDE Chipset driver for the Compaq TriFlex IDE controller. + * + * Known to work with the Compaq Workstation 5x00 series. + * + * Copyright (C) 2002 Hewlett-Packard Development Group, L.P. + * Author: Torben Mathiasen <torben.mathiasen@hp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Loosely based on the piix & svwks drivers. + * + * Documentation: + * Not publically available. + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/pci.h> +#include <linux/ide.h> +#include <linux/init.h> + +static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 channel_offset = hwif->channel ? 0x74 : 0x70; + u16 timing = 0; + u32 triflex_timings = 0; + u8 unit = (drive->select.b.unit & 0x01); + u8 speed = ide_rate_filter(0, xferspeed); + + pci_read_config_dword(dev, channel_offset, &triflex_timings); + + switch(speed) { + case XFER_MW_DMA_2: + timing = 0x0103; + break; + case XFER_MW_DMA_1: + timing = 0x0203; + break; + case XFER_MW_DMA_0: + timing = 0x0808; + break; + case XFER_SW_DMA_2: + case XFER_SW_DMA_1: + case XFER_SW_DMA_0: + timing = 0x0f0f; + break; + case XFER_PIO_4: + timing = 0x0202; + break; + case XFER_PIO_3: + timing = 0x0204; + break; + case XFER_PIO_2: + timing = 0x0404; + break; + case XFER_PIO_1: + timing = 0x0508; + break; + case XFER_PIO_0: + timing = 0x0808; + break; + default: + return -1; + } + + triflex_timings &= ~(0xFFFF << (16 * unit)); + triflex_timings |= (timing << (16 * unit)); + + pci_write_config_dword(dev, channel_offset, triflex_timings); + + return (ide_config_drive_speed(drive, speed)); +} + +static void triflex_tune_drive(ide_drive_t *drive, u8 pio) +{ + int use_pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + (void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio)); +} + +static int triflex_config_drive_for_dma(ide_drive_t *drive) +{ + int speed = ide_dma_speed(drive, 0); /* No ultra speeds */ + + if (!speed) { + u8 pspeed = ide_get_best_pio_mode(drive, 255, 4, NULL); + speed = XFER_PIO_0 + pspeed; + } + + (void) triflex_tune_chipset(drive, speed); + return ide_dma_enable(drive); +} + +static int triflex_config_drive_xfer_rate(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + if ((id->capability & 1) && drive->autodma) { + if (ide_use_dma(drive)) { + if (triflex_config_drive_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + } + + hwif->tuneproc(drive, 255); + return hwif->ide_dma_off_quietly(drive); +} + +static void __init init_hwif_triflex(ide_hwif_t *hwif) +{ + hwif->tuneproc = &triflex_tune_drive; + hwif->speedproc = &triflex_tune_chipset; + + hwif->atapi_dma = 1; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + hwif->ide_dma_check = &triflex_config_drive_xfer_rate; + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +static ide_pci_device_t triflex_device __devinitdata = { + .name = "TRIFLEX", + .init_hwif = init_hwif_triflex, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}}, + .bootable = ON_BOARD, +}; + +static int __devinit triflex_init_one(struct pci_dev *dev, + const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &triflex_device); +} + +static struct pci_device_id triflex_pci_tbl[] = { + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, triflex_pci_tbl); + +static struct pci_driver driver = { + .name = "TRIFLEX_IDE", + .id_table = triflex_pci_tbl, + .probe = triflex_init_one, +}; + +static int triflex_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(triflex_ide_init); + +MODULE_AUTHOR("Torben Mathiasen"); +MODULE_DESCRIPTION("PCI driver module for Compaq Triflex IDE"); +MODULE_LICENSE("GPL"); + + diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c new file mode 100644 index 0000000..8b5eea5 --- /dev/null +++ b/drivers/ide/pci/trm290.c @@ -0,0 +1,369 @@ +/* + * linux/drivers/ide/pci/trm290.c Version 1.02 Mar. 18, 2000 + * + * Copyright (c) 1997-1998 Mark Lord + * May be copied or modified under the terms of the GNU General Public License + * + * June 22, 2004 - get rid of check_region + * Jesper Juhl <juhl-lkml@dif.dk> + * + */ + +/* + * This module provides support for the bus-master IDE DMA function + * of the Tekram TRM290 chip, used on a variety of PCI IDE add-on boards, + * including a "Precision Instruments" board. The TRM290 pre-dates + * the sff-8038 standard (ide-dma.c) by a few months, and differs + * significantly enough to warrant separate routines for some functions, + * while re-using others from ide-dma.c. + * + * EXPERIMENTAL! It works for me (a sample of one). + * + * Works reliably for me in DMA mode (READs only), + * DMA WRITEs are disabled by default (see #define below); + * + * DMA is not enabled automatically for this chipset, + * but can be turned on manually (with "hdparm -d1") at run time. + * + * I need volunteers with "spare" drives for further testing + * and development, and maybe to help figure out the peculiarities. + * Even knowing the registers (below), some things behave strangely. + */ + +#define TRM290_NO_DMA_WRITES /* DMA writes seem unreliable sometimes */ + +/* + * TRM-290 PCI-IDE2 Bus Master Chip + * ================================ + * The configuration registers are addressed in normal I/O port space + * and are used as follows: + * + * trm290_base depends on jumper settings, and is probed for by ide-dma.c + * + * trm290_base+2 when WRITTEN: chiptest register (byte, write-only) + * bit7 must always be written as "1" + * bits6-2 undefined + * bit1 1=legacy_compatible_mode, 0=native_pci_mode + * bit0 1=test_mode, 0=normal(default) + * + * trm290_base+2 when READ: status register (byte, read-only) + * bits7-2 undefined + * bit1 channel0 busmaster interrupt status 0=none, 1=asserted + * bit0 channel0 interrupt status 0=none, 1=asserted + * + * trm290_base+3 Interrupt mask register + * bits7-5 undefined + * bit4 legacy_header: 1=present, 0=absent + * bit3 channel1 busmaster interrupt status 0=none, 1=asserted (read only) + * bit2 channel1 interrupt status 0=none, 1=asserted (read only) + * bit1 channel1 interrupt mask: 1=masked, 0=unmasked(default) + * bit0 channel0 interrupt mask: 1=masked, 0=unmasked(default) + * + * trm290_base+1 "CPR" Config Pointer Register (byte) + * bit7 1=autoincrement CPR bits 2-0 after each access of CDR + * bit6 1=min. 1 wait-state posted write cycle (default), 0=0 wait-state + * bit5 0=enabled master burst access (default), 1=disable (write only) + * bit4 PCI DEVSEL# timing select: 1=medium(default), 0=fast + * bit3 0=primary IDE channel, 1=secondary IDE channel + * bits2-0 register index for accesses through CDR port + * + * trm290_base+0 "CDR" Config Data Register (word) + * two sets of seven config registers, + * selected by CPR bit 3 (channel) and CPR bits 2-0 (index 0 to 6), + * each index defined below: + * + * Index-0 Base address register for command block (word) + * defaults: 0x1f0 for primary, 0x170 for secondary + * + * Index-1 general config register (byte) + * bit7 1=DMA enable, 0=DMA disable + * bit6 1=activate IDE_RESET, 0=no action (default) + * bit5 1=enable IORDY, 0=disable IORDY (default) + * bit4 0=16-bit data port(default), 1=8-bit (XT) data port + * bit3 interrupt polarity: 1=active_low, 0=active_high(default) + * bit2 power-saving-mode(?): 1=enable, 0=disable(default) (write only) + * bit1 bus_master_mode(?): 1=enable, 0=disable(default) + * bit0 enable_io_ports: 1=enable(default), 0=disable + * + * Index-2 read-ahead counter preload bits 0-7 (byte, write only) + * bits7-0 bits7-0 of readahead count + * + * Index-3 read-ahead config register (byte, write only) + * bit7 1=enable_readahead, 0=disable_readahead(default) + * bit6 1=clear_FIFO, 0=no_action + * bit5 undefined + * bit4 mode4 timing control: 1=enable, 0=disable(default) + * bit3 undefined + * bit2 undefined + * bits1-0 bits9-8 of read-ahead count + * + * Index-4 base address register for control block (word) + * defaults: 0x3f6 for primary, 0x376 for secondary + * + * Index-5 data port timings (shared by both drives) (byte) + * standard PCI "clk" (clock) counts, default value = 0xf5 + * + * bits7-6 setup time: 00=1clk, 01=2clk, 10=3clk, 11=4clk + * bits5-3 hold time: 000=1clk, 001=2clk, 010=3clk, + * 011=4clk, 100=5clk, 101=6clk, + * 110=8clk, 111=12clk + * bits2-0 active time: 000=2clk, 001=3clk, 010=4clk, + * 011=5clk, 100=6clk, 101=8clk, + * 110=12clk, 111=16clk + * + * Index-6 command/control port timings (shared by both drives) (byte) + * same layout as Index-5, default value = 0xde + * + * Suggested CDR programming for PIO mode0 (600ns): + * 0x01f0,0x21,0xff,0x80,0x03f6,0xf5,0xde ; primary + * 0x0170,0x21,0xff,0x80,0x0376,0xf5,0xde ; secondary + * + * Suggested CDR programming for PIO mode3 (180ns): + * 0x01f0,0x21,0xff,0x80,0x03f6,0x09,0xde ; primary + * 0x0170,0x21,0xff,0x80,0x0376,0x09,0xde ; secondary + * + * Suggested CDR programming for PIO mode4 (120ns): + * 0x01f0,0x21,0xff,0x80,0x03f6,0x00,0xde ; primary + * 0x0170,0x21,0xff,0x80,0x0376,0x00,0xde ; secondary + * + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/blkdev.h> +#include <linux/init.h> +#include <linux/hdreg.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/ide.h> + +#include <asm/io.h> + +static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma) +{ + ide_hwif_t *hwif = HWIF(drive); + u16 reg = 0; + unsigned long flags; + + /* select PIO or DMA */ + reg = use_dma ? (0x21 | 0x82) : (0x21 & ~0x82); + + local_irq_save(flags); + + if (reg != hwif->select_data) { + hwif->select_data = reg; + /* set PIO/DMA */ + hwif->OUTB(0x51|(hwif->channel<<3), hwif->config_data+1); + hwif->OUTW(reg & 0xff, hwif->config_data); + } + + /* enable IRQ if not probing */ + if (drive->present) { + reg = hwif->INW(hwif->config_data + 3); + reg &= 0x13; + reg &= ~(1 << hwif->channel); + hwif->OUTW(reg, hwif->config_data+3); + } + + local_irq_restore(flags); +} + +static void trm290_selectproc (ide_drive_t *drive) +{ + trm290_prepare_drive(drive, drive->using_dma); +} + +#ifdef CONFIG_BLK_DEV_IDEDMA +static void trm290_ide_dma_exec_cmd(ide_drive_t *drive, u8 command) +{ + ide_hwif_t *hwif = HWIF(drive); + + if (HWGROUP(drive)->handler != NULL) /* paranoia check */ + BUG(); + ide_set_handler(drive, &ide_dma_intr, WAIT_CMD, NULL); + /* issue cmd to drive */ + hwif->OUTB(command, IDE_COMMAND_REG); +} + +static int trm290_ide_dma_setup(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + struct request *rq = hwif->hwgroup->rq; + unsigned int count, rw; + + if (rq_data_dir(rq)) { +#ifdef TRM290_NO_DMA_WRITES + /* always use PIO for writes */ + trm290_prepare_drive(drive, 0); /* select PIO xfer */ + return 1; +#endif + rw = 1; + } else + rw = 2; + + if (!(count = ide_build_dmatable(drive, rq))) { + /* try PIO instead of DMA */ + trm290_prepare_drive(drive, 0); /* select PIO xfer */ + return 1; + } + /* select DMA xfer */ + trm290_prepare_drive(drive, 1); + hwif->OUTL(hwif->dmatable_dma|rw, hwif->dma_command); + drive->waiting_for_dma = 1; + /* start DMA */ + hwif->OUTW((count * 2) - 1, hwif->dma_status); + return 0; +} + +static void trm290_ide_dma_start(ide_drive_t *drive) +{ +} + +static int trm290_ide_dma_end (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u16 status = 0; + + drive->waiting_for_dma = 0; + /* purge DMA mappings */ + ide_destroy_dmatable(drive); + status = hwif->INW(hwif->dma_status); + return (status != 0x00ff); +} + +static int trm290_ide_dma_test_irq (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u16 status = 0; + + status = hwif->INW(hwif->dma_status); + return (status == 0x00ff); +} +#endif /* CONFIG_BLK_DEV_IDEDMA */ + +/* + * Invoked from ide-dma.c at boot time. + */ +static void __devinit init_hwif_trm290(ide_hwif_t *hwif) +{ + unsigned int cfgbase = 0; + unsigned long flags; + u8 reg = 0; + struct pci_dev *dev = hwif->pci_dev; + + hwif->no_lba48 = 1; + hwif->chipset = ide_trm290; + cfgbase = pci_resource_start(dev, 4); + if ((dev->class & 5) && cfgbase) { + hwif->config_data = cfgbase; + printk(KERN_INFO "TRM290: chip config base at 0x%04lx\n", + hwif->config_data); + } else { + hwif->config_data = 0x3df0; + printk(KERN_INFO "TRM290: using default config base at 0x%04lx\n", + hwif->config_data); + } + + local_irq_save(flags); + /* put config reg into first byte of hwif->select_data */ + hwif->OUTB(0x51|(hwif->channel<<3), hwif->config_data+1); + /* select PIO as default */ + hwif->select_data = 0x21; + hwif->OUTB(hwif->select_data, hwif->config_data); + /* get IRQ info */ + reg = hwif->INB(hwif->config_data+3); + /* mask IRQs for both ports */ + reg = (reg & 0x10) | 0x03; + hwif->OUTB(reg, hwif->config_data+3); + local_irq_restore(flags); + + if ((reg & 0x10)) + /* legacy mode */ + hwif->irq = hwif->channel ? 15 : 14; + else if (!hwif->irq && hwif->mate && hwif->mate->irq) + /* sharing IRQ with mate */ + hwif->irq = hwif->mate->irq; + + ide_setup_dma(hwif, (hwif->config_data + 4) ^ (hwif->channel ? 0x0080 : 0x0000), 3); + +#ifdef CONFIG_BLK_DEV_IDEDMA + hwif->dma_setup = &trm290_ide_dma_setup; + hwif->dma_exec_cmd = &trm290_ide_dma_exec_cmd; + hwif->dma_start = &trm290_ide_dma_start; + hwif->ide_dma_end = &trm290_ide_dma_end; + hwif->ide_dma_test_irq = &trm290_ide_dma_test_irq; +#endif /* CONFIG_BLK_DEV_IDEDMA */ + + hwif->selectproc = &trm290_selectproc; + hwif->autodma = 0; /* play it safe for now */ + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +#if 1 + { + /* + * My trm290-based card doesn't seem to work with all possible values + * for the control basereg, so this kludge ensures that we use only + * values that are known to work. Ugh. -ml + */ + u16 new, old, compat = hwif->channel ? 0x374 : 0x3f4; + static u16 next_offset = 0; + u8 old_mask; + + hwif->OUTB(0x54|(hwif->channel<<3), hwif->config_data+1); + old = hwif->INW(hwif->config_data); + old &= ~1; + old_mask = hwif->INB(old+2); + if (old != compat && old_mask == 0xff) { + /* leave lower 10 bits untouched */ + compat += (next_offset += 0x400); + hwif->io_ports[IDE_CONTROL_OFFSET] = compat + 2; + hwif->OUTW(compat|1, hwif->config_data); + new = hwif->INW(hwif->config_data); + printk(KERN_INFO "%s: control basereg workaround: " + "old=0x%04x, new=0x%04x\n", + hwif->name, old, new & ~1); + } + } +#endif +} + +static ide_pci_device_t trm290_chipset __devinitdata = { + .name = "TRM290", + .init_hwif = init_hwif_trm290, + .channels = 2, + .autodma = NOAUTODMA, + .bootable = ON_BOARD, +}; + +static int __devinit trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &trm290_chipset); +} + +static struct pci_device_id trm290_pci_tbl[] = { + { PCI_VENDOR_ID_TEKRAM, PCI_DEVICE_ID_TEKRAM_DC290, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, trm290_pci_tbl); + +static struct pci_driver driver = { + .name = "TRM290_IDE", + .id_table = trm290_pci_tbl, + .probe = trm290_init_one, +}; + +static int trm290_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(trm290_ide_init); + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("PCI driver module for Tekram TRM290 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c new file mode 100644 index 0000000..069dbff --- /dev/null +++ b/drivers/ide/pci/via82cxxx.c @@ -0,0 +1,656 @@ +/* + * + * Version 3.38 + * + * VIA IDE driver for Linux. Supported southbridges: + * + * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b, + * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a, + * vt8235, vt8237 + * + * Copyright (c) 2000-2002 Vojtech Pavlik + * + * Based on the work of: + * Michel Aubry + * Jeff Garzik + * Andre Hedrick + * + * Documentation: + * Obsolete device documentation publically available from via.com.tw + * Current device documentation available under NDA only + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ide.h> +#include <asm/io.h> + +#ifdef CONFIG_PPC_MULTIPLATFORM +#include <asm/processor.h> +#endif + +#include "ide-timing.h" + +#define DISPLAY_VIA_TIMINGS + +#define VIA_IDE_ENABLE 0x40 +#define VIA_IDE_CONFIG 0x41 +#define VIA_FIFO_CONFIG 0x43 +#define VIA_MISC_1 0x44 +#define VIA_MISC_2 0x45 +#define VIA_MISC_3 0x46 +#define VIA_DRIVE_TIMING 0x48 +#define VIA_8BIT_TIMING 0x4e +#define VIA_ADDRESS_SETUP 0x4c +#define VIA_UDMA_TIMING 0x50 + +#define VIA_UDMA 0x007 +#define VIA_UDMA_NONE 0x000 +#define VIA_UDMA_33 0x001 +#define VIA_UDMA_66 0x002 +#define VIA_UDMA_100 0x003 +#define VIA_UDMA_133 0x004 +#define VIA_BAD_PREQ 0x010 /* Crashes if PREQ# till DDACK# set */ +#define VIA_BAD_CLK66 0x020 /* 66 MHz clock doesn't work correctly */ +#define VIA_SET_FIFO 0x040 /* Needs to have FIFO split set */ +#define VIA_NO_UNMASK 0x080 /* Doesn't work with IRQ unmasking on */ +#define VIA_BAD_ID 0x100 /* Has wrong vendor ID (0x1107) */ +#define VIA_BAD_AST 0x200 /* Don't touch Address Setup Timing */ + +/* + * VIA SouthBridge chips. + */ + +static struct via_isa_bridge { + char *name; + u16 id; + u8 rev_min; + u8 rev_max; + u16 flags; +} via_isa_bridges[] = { + { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 }, + { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 }, + { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 }, + { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 }, + { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 }, + { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, + { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 }, + { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO }, + { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO }, + { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { NULL } +}; + +static struct via_isa_bridge *via_config; +static unsigned int via_80w; +static unsigned int via_clock; +static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" }; + +/* + * VIA /proc entry. + */ + +#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS) + +#include <linux/stat.h> +#include <linux/proc_fs.h> + +static u8 via_proc = 0; +static unsigned long via_base; +static struct pci_dev *bmide_dev, *isa_dev; + +static char *via_control3[] = { "No limit", "64", "128", "192" }; + +#define via_print(format, arg...) p += sprintf(p, format "\n" , ## arg) +#define via_print_drive(name, format, arg...)\ + p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n"); + + +/** + * via_get_info - generate via /proc file + * @buffer: buffer for data + * @addr: set to start of data to use + * @offset: current file offset + * @count: size of read + * + * Fills in buffer with the debugging/configuration information for + * the VIA chipset tuning and attached drives + */ + +static int via_get_info(char *buffer, char **addr, off_t offset, int count) +{ + int speed[4], cycle[4], setup[4], active[4], recover[4], den[4], + uen[4], udma[4], umul[4], active8b[4], recover8b[4]; + struct pci_dev *dev = bmide_dev; + unsigned int v, u, i; + int len; + u16 c, w; + u8 t, x; + char *p = buffer; + + via_print("----------VIA BusMastering IDE Configuration" + "----------------"); + + via_print("Driver Version: 3.38"); + via_print("South Bridge: VIA %s", + via_config->name); + + pci_read_config_byte(isa_dev, PCI_REVISION_ID, &t); + pci_read_config_byte(dev, PCI_REVISION_ID, &x); + via_print("Revision: ISA %#x IDE %#x", t, x); + via_print("Highest DMA rate: %s", + via_dma[via_config->flags & VIA_UDMA]); + + via_print("BM-DMA base: %#lx", via_base); + via_print("PCI clock: %d.%dMHz", + via_clock / 1000, via_clock / 100 % 10); + + pci_read_config_byte(dev, VIA_MISC_1, &t); + via_print("Master Read Cycle IRDY: %dws", + (t & 64) >> 6); + via_print("Master Write Cycle IRDY: %dws", + (t & 32) >> 5); + via_print("BM IDE Status Register Read Retry: %s", + (t & 8) ? "yes" : "no"); + + pci_read_config_byte(dev, VIA_MISC_3, &t); + via_print("Max DRDY Pulse Width: %s%s", + via_control3[(t & 0x03)], (t & 0x03) ? " PCI clocks" : ""); + + via_print("-----------------------Primary IDE" + "-------Secondary IDE------"); + via_print("Read DMA FIFO flush: %10s%20s", + (t & 0x80) ? "yes" : "no", (t & 0x40) ? "yes" : "no"); + via_print("End Sector FIFO flush: %10s%20s", + (t & 0x20) ? "yes" : "no", (t & 0x10) ? "yes" : "no"); + + pci_read_config_byte(dev, VIA_IDE_CONFIG, &t); + via_print("Prefetch Buffer: %10s%20s", + (t & 0x80) ? "yes" : "no", (t & 0x20) ? "yes" : "no"); + via_print("Post Write Buffer: %10s%20s", + (t & 0x40) ? "yes" : "no", (t & 0x10) ? "yes" : "no"); + + pci_read_config_byte(dev, VIA_IDE_ENABLE, &t); + via_print("Enabled: %10s%20s", + (t & 0x02) ? "yes" : "no", (t & 0x01) ? "yes" : "no"); + + c = inb(via_base + 0x02) | (inb(via_base + 0x0a) << 8); + via_print("Simplex only: %10s%20s", + (c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no"); + + via_print("Cable Type: %10s%20s", + (via_80w & 1) ? "80w" : "40w", (via_80w & 2) ? "80w" : "40w"); + + via_print("-------------------drive0----drive1" + "----drive2----drive3-----"); + + pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); + pci_read_config_dword(dev, VIA_DRIVE_TIMING, &v); + pci_read_config_word(dev, VIA_8BIT_TIMING, &w); + + if (via_config->flags & VIA_UDMA) + pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); + else u = 0; + + for (i = 0; i < 4; i++) { + + setup[i] = ((t >> ((3 - i) << 1)) & 0x3) + 1; + recover8b[i] = ((w >> ((1 - (i >> 1)) << 3)) & 0xf) + 1; + active8b[i] = ((w >> (((1 - (i >> 1)) << 3) + 4)) & 0xf) + 1; + active[i] = ((v >> (((3 - i) << 3) + 4)) & 0xf) + 1; + recover[i] = ((v >> ((3 - i) << 3)) & 0xf) + 1; + udma[i] = ((u >> ((3 - i) << 3)) & 0x7) + 2; + umul[i] = ((u >> (((3 - i) & 2) << 3)) & 0x8) ? 1 : 2; + uen[i] = ((u >> ((3 - i) << 3)) & 0x20); + den[i] = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2)); + + speed[i] = 2 * via_clock / (active[i] + recover[i]); + cycle[i] = 1000000 * (active[i] + recover[i]) / via_clock; + + if (!uen[i] || !den[i]) + continue; + + switch (via_config->flags & VIA_UDMA) { + + case VIA_UDMA_33: + speed[i] = 2 * via_clock / udma[i]; + cycle[i] = 1000000 * udma[i] / via_clock; + break; + + case VIA_UDMA_66: + speed[i] = 4 * via_clock / (udma[i] * umul[i]); + cycle[i] = 500000 * (udma[i] * umul[i]) / via_clock; + break; + + case VIA_UDMA_100: + speed[i] = 6 * via_clock / udma[i]; + cycle[i] = 333333 * udma[i] / via_clock; + break; + + case VIA_UDMA_133: + speed[i] = 8 * via_clock / udma[i]; + cycle[i] = 250000 * udma[i] / via_clock; + break; + } + } + + via_print_drive("Transfer Mode: ", "%10s", + den[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO"); + + via_print_drive("Address Setup: ", "%8dns", + 1000000 * setup[i] / via_clock); + via_print_drive("Cmd Active: ", "%8dns", + 1000000 * active8b[i] / via_clock); + via_print_drive("Cmd Recovery: ", "%8dns", + 1000000 * recover8b[i] / via_clock); + via_print_drive("Data Active: ", "%8dns", + 1000000 * active[i] / via_clock); + via_print_drive("Data Recovery: ", "%8dns", + 1000000 * recover[i] / via_clock); + via_print_drive("Cycle Time: ", "%8dns", + cycle[i]); + via_print_drive("Transfer Rate: ", "%4d.%dMB/s", + speed[i] / 1000, speed[i] / 100 % 10); + + /* hoping it is less than 4K... */ + len = (p - buffer) - offset; + *addr = buffer + offset; + + return len > count ? count : len; +} + +#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */ + +/** + * via_set_speed - write timing registers + * @dev: PCI device + * @dn: device + * @timing: IDE timing data to use + * + * via_set_speed writes timing values to the chipset registers + */ + +static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing) +{ + u8 t; + + if (~via_config->flags & VIA_BAD_AST) { + pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); + t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); + pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t); + } + + pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)), + ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1)); + + pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn), + ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); + + switch (via_config->flags & VIA_UDMA) { + case VIA_UDMA_33: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; + case VIA_UDMA_66: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break; + case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; + case VIA_UDMA_133: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; + default: return; + } + + pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t); +} + +/** + * via_set_drive - configure transfer mode + * @drive: Drive to set up + * @speed: desired speed + * + * via_set_drive() computes timing values configures the drive and + * the chipset to a desired transfer mode. It also can be called + * by upper layers. + */ + +static int via_set_drive(ide_drive_t *drive, u8 speed) +{ + ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); + struct ide_timing t, p; + unsigned int T, UT; + + if (speed != XFER_PIO_SLOW) + ide_config_drive_speed(drive, speed); + + T = 1000000000 / via_clock; + + switch (via_config->flags & VIA_UDMA) { + case VIA_UDMA_33: UT = T; break; + case VIA_UDMA_66: UT = T/2; break; + case VIA_UDMA_100: UT = T/3; break; + case VIA_UDMA_133: UT = T/4; break; + default: UT = T; + } + + ide_timing_compute(drive, speed, &t, T, UT); + + if (peer->present) { + ide_timing_compute(peer, peer->current_speed, &p, T, UT); + ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); + } + + via_set_speed(HWIF(drive)->pci_dev, drive->dn, &t); + + if (!drive->init_speed) + drive->init_speed = speed; + drive->current_speed = speed; + + return 0; +} + +/** + * via82cxxx_tune_drive - PIO setup + * @drive: drive to set up + * @pio: mode to use (255 for 'best possible') + * + * A callback from the upper layers for PIO-only tuning. + */ + +static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio) +{ + if (pio == 255) { + via_set_drive(drive, + ide_find_best_mode(drive, XFER_PIO | XFER_EPIO)); + return; + } + + via_set_drive(drive, XFER_PIO_0 + min_t(u8, pio, 5)); +} + +/** + * via82cxxx_ide_dma_check - set up for DMA if possible + * @drive: IDE drive to set up + * + * Set up the drive for the highest supported speed considering the + * driver, controller and cable + */ + +static int via82cxxx_ide_dma_check (ide_drive_t *drive) +{ + u16 w80 = HWIF(drive)->udma_four; + + u16 speed = ide_find_best_mode(drive, + XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA | + (via_config->flags & VIA_UDMA ? XFER_UDMA : 0) | + (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) | + (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) | + (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0)); + + via_set_drive(drive, speed); + + if (drive->autodma && (speed & XFER_MODE) != XFER_PIO) + return HWIF(drive)->ide_dma_on(drive); + return HWIF(drive)->ide_dma_off_quietly(drive); +} + +/** + * init_chipset_via82cxxx - initialization handler + * @dev: PCI device + * @name: Name of interface + * + * The initialization callback. Here we determine the IDE chip type + * and initialize its drive independent registers. + */ + +static unsigned int __init init_chipset_via82cxxx(struct pci_dev *dev, const char *name) +{ + struct pci_dev *isa = NULL; + u8 t, v; + unsigned int u; + int i; + + /* + * Find the ISA bridge to see how good the IDE is. + */ + + for (via_config = via_isa_bridges; via_config->id; via_config++) + if ((isa = pci_find_device(PCI_VENDOR_ID_VIA + + !!(via_config->flags & VIA_BAD_ID), + via_config->id, NULL))) { + + pci_read_config_byte(isa, PCI_REVISION_ID, &t); + if (t >= via_config->rev_min && + t <= via_config->rev_max) + break; + } + + if (!via_config->id) { + printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n"); + return -ENODEV; + } + + /* + * Check 80-wire cable presence and setup Clk66. + */ + + switch (via_config->flags & VIA_UDMA) { + + case VIA_UDMA_66: + /* Enable Clk66 */ + pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); + pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008); + for (i = 24; i >= 0; i -= 8) + if (((u >> (i & 16)) & 8) && + ((u >> i) & 0x20) && + (((u >> i) & 7) < 2)) { + /* + * 2x PCI clock and + * UDMA w/ < 3T/cycle + */ + via_80w |= (1 << (1 - (i >> 4))); + } + break; + + case VIA_UDMA_100: + pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 0x10) || + (((u >> i) & 0x20) && + (((u >> i) & 7) < 4))) { + /* BIOS 80-wire bit or + * UDMA w/ < 60ns/cycle + */ + via_80w |= (1 << (1 - (i >> 4))); + } + break; + + case VIA_UDMA_133: + pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 0x10) || + (((u >> i) & 0x20) && + (((u >> i) & 7) < 6))) { + /* BIOS 80-wire bit or + * UDMA w/ < 60ns/cycle + */ + via_80w |= (1 << (1 - (i >> 4))); + } + break; + + } + + /* Disable Clk66 */ + if (via_config->flags & VIA_BAD_CLK66) { + /* Would cause trouble on 596a and 686 */ + pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); + pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008); + } + + /* + * Check whether interfaces are enabled. + */ + + pci_read_config_byte(dev, VIA_IDE_ENABLE, &v); + + /* + * Set up FIFO sizes and thresholds. + */ + + pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t); + + /* Disable PREQ# till DDACK# */ + if (via_config->flags & VIA_BAD_PREQ) { + /* Would crash on 586b rev 41 */ + t &= 0x7f; + } + + /* Fix FIFO split between channels */ + if (via_config->flags & VIA_SET_FIFO) { + t &= (t & 0x9f); + switch (v & 3) { + case 2: t |= 0x00; break; /* 16 on primary */ + case 1: t |= 0x60; break; /* 16 on secondary */ + case 3: t |= 0x20; break; /* 8 pri 8 sec */ + } + } + + pci_write_config_byte(dev, VIA_FIFO_CONFIG, t); + + /* + * Determine system bus clock. + */ + + via_clock = system_bus_clock() * 1000; + + switch (via_clock) { + case 33000: via_clock = 33333; break; + case 37000: via_clock = 37500; break; + case 41000: via_clock = 41666; break; + } + + if (via_clock < 20000 || via_clock > 50000) { + printk(KERN_WARNING "VP_IDE: User given PCI clock speed " + "impossible (%d), using 33 MHz instead.\n", via_clock); + printk(KERN_WARNING "VP_IDE: Use ide0=ata66 if you want " + "to assume 80-wire cable.\n"); + via_clock = 33333; + } + + /* + * Print the boot message. + */ + + pci_read_config_byte(isa, PCI_REVISION_ID, &t); + printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %s " + "controller on pci%s\n", + via_config->name, t, + via_dma[via_config->flags & VIA_UDMA], + pci_name(dev)); + + /* + * Setup /proc/ide/via entry. + */ + +#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS) + if (!via_proc) { + via_base = pci_resource_start(dev, 4); + bmide_dev = dev; + isa_dev = isa; + ide_pci_create_host_proc("via", via_get_info); + via_proc = 1; + } +#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */ + return 0; +} + +static void __init init_hwif_via82cxxx(ide_hwif_t *hwif) +{ + int i; + + hwif->autodma = 0; + + hwif->tuneproc = &via82cxxx_tune_drive; + hwif->speedproc = &via_set_drive; + + +#if defined(CONFIG_PPC_MULTIPLATFORM) && defined(CONFIG_PPC32) + if(_machine == _MACH_chrp && _chrp_type == _CHRP_Pegasos) { + hwif->irq = hwif->channel ? 15 : 14; + } +#endif + + for (i = 0; i < 2; i++) { + hwif->drives[i].io_32bit = 1; + hwif->drives[i].unmask = (via_config->flags & VIA_NO_UNMASK) ? 0 : 1; + hwif->drives[i].autotune = 1; + hwif->drives[i].dn = hwif->channel * 2 + i; + } + + if (!hwif->dma_base) + return; + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x7f; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + if (!hwif->udma_four) + hwif->udma_four = (via_80w >> hwif->channel) & 1; + hwif->ide_dma_check = &via82cxxx_ide_dma_check; + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +static ide_pci_device_t via82cxxx_chipset __devinitdata = { + .name = "VP_IDE", + .init_chipset = init_chipset_via82cxxx, + .init_hwif = init_hwif_via82cxxx, + .channels = 2, + .autodma = NOAUTODMA, + .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, + .bootable = ON_BOARD, +}; + +static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &via82cxxx_chipset); +} + +static struct pci_device_id via_pci_tbl[] = { + { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, via_pci_tbl); + +static struct pci_driver driver = { + .name = "VIA_IDE", + .id_table = via_pci_tbl, + .probe = via_init_one, +}; + +static int via_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(via_ide_init); + +MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for VIA IDE"); +MODULE_LICENSE("GPL"); |
