Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 370 insertions, 0 deletions

diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
new file mode 100644
index 0000000..df9ee9a
--- /dev/null
+++ b/drivers/ide/pci/atiixp.c
@@ -0,0 +1,370 @@
+/*
+ *  linux/drivers/ide/pci/atiixp.c	Version 0.01-bart2	Feb. 26, 2004
+ *
+ *  Copyright (C) 2003 ATI Inc. <hyu@ati.com>
+ *  Copyright (C) 2004 Bartlomiej Zolnierkiewicz
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#define ATIIXP_IDE_PIO_TIMING		0x40
+#define ATIIXP_IDE_MDMA_TIMING		0x44
+#define ATIIXP_IDE_PIO_CONTROL		0x48
+#define ATIIXP_IDE_PIO_MODE		0x4a
+#define ATIIXP_IDE_UDMA_CONTROL		0x54
+#define ATIIXP_IDE_UDMA_MODE		0x56
+
+typedef struct {
+	u8 command_width;
+	u8 recover_width;
+} atiixp_ide_timing;
+
+static atiixp_ide_timing pio_timing[] = {
+	{ 0x05, 0x0d },
+	{ 0x04, 0x07 },
+	{ 0x03, 0x04 },
+	{ 0x02, 0x02 },
+	{ 0x02, 0x00 },
+};
+
+static atiixp_ide_timing mdma_timing[] = {
+	{ 0x07, 0x07 },
+	{ 0x02, 0x01 },
+	{ 0x02, 0x00 },
+};
+
+static int save_mdma_mode[4];
+
+/**
+ *	atiixp_ratemask		-	compute rate mask for ATIIXP IDE
+ *	@drive: IDE drive to compute for
+ *
+ *	Returns the available modes for the ATIIXP IDE controller.
+ */
+
+static u8 atiixp_ratemask(ide_drive_t *drive)
+{
+	u8 mode = 3;
+
+	if (!eighty_ninty_three(drive))
+		mode = min(mode, (u8)1);
+	return mode;
+}
+
+/**
+ *	atiixp_dma_2_pio		-	return the PIO mode matching DMA
+ *	@xfer_rate: transfer speed
+ *
+ *	Returns the nearest equivalent PIO timing for the PIO or DMA
+ *	mode requested by the controller.
+ */
+
+static u8 atiixp_dma_2_pio(u8 xfer_rate) {
+	switch(xfer_rate) {
+		case XFER_UDMA_6:
+		case XFER_UDMA_5:
+		case XFER_UDMA_4:
+		case XFER_UDMA_3:
+		case XFER_UDMA_2:
+		case XFER_UDMA_1:
+		case XFER_UDMA_0:
+		case XFER_MW_DMA_2:
+		case XFER_PIO_4:
+			return 4;
+		case XFER_MW_DMA_1:
+		case XFER_PIO_3:
+			return 3;
+		case XFER_SW_DMA_2:
+		case XFER_PIO_2:
+			return 2;
+		case XFER_MW_DMA_0:
+		case XFER_SW_DMA_1:
+		case XFER_SW_DMA_0:
+		case XFER_PIO_1:
+		case XFER_PIO_0:
+		case XFER_PIO_SLOW:
+		default:
+			return 0;
+	}
+}
+
+static int atiixp_ide_dma_host_on(ide_drive_t *drive)
+{
+	struct pci_dev *dev = drive->hwif->pci_dev;
+	unsigned long flags;
+	u16 tmp16;
+
+	spin_lock_irqsave(&ide_lock, flags);
+
+	pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
+	if (save_mdma_mode[drive->dn])
+		tmp16 &= ~(1 << drive->dn);
+	else
+		tmp16 |= (1 << drive->dn);
+	pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
+
+	spin_unlock_irqrestore(&ide_lock, flags);
+
+	return __ide_dma_host_on(drive);
+}
+
+static int atiixp_ide_dma_host_off(ide_drive_t *drive)
+{
+	struct pci_dev *dev = drive->hwif->pci_dev;
+	unsigned long flags;
+	u16 tmp16;
+
+	spin_lock_irqsave(&ide_lock, flags);
+
+	pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
+	tmp16 &= ~(1 << drive->dn);
+	pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
+
+	spin_unlock_irqrestore(&ide_lock, flags);
+
+	return __ide_dma_host_off(drive);
+}
+
+/**
+ *	atiixp_tune_drive		-	tune a drive attached to a ATIIXP
+ *	@drive: drive to tune
+ *	@pio: desired PIO mode
+ *
+ *	Set the interface PIO mode.
+ */
+
+static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
+{
+	struct pci_dev *dev = drive->hwif->pci_dev;
+	unsigned long flags;
+	int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+	u32 pio_timing_data;
+	u16 pio_mode_data;
+
+	spin_lock_irqsave(&ide_lock, flags);
+
+	pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
+	pio_mode_data &= ~(0x07 << (drive->dn * 4));
+	pio_mode_data |= (pio << (drive->dn * 4));
+	pci_write_config_word(dev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
+
+	pci_read_config_dword(dev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
+	pio_timing_data &= ~(0xff << timing_shift);
+	pio_timing_data |= (pio_timing[pio].recover_width << timing_shift) |
+		 (pio_timing[pio].command_width << (timing_shift + 4));
+	pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
+
+	spin_unlock_irqrestore(&ide_lock, flags);
+}
+
+/**
+ *	atiixp_tune_chipset	-	tune a ATIIXP interface
+ *	@drive: IDE drive to tune
+ *	@xferspeed: speed to configure
+ *
+ *	Set a ATIIXP interface channel to the desired speeds. This involves
+ *	requires the right timing data into the ATIIXP configuration space
+ *	then setting the drive parameters appropriately
+ */
+
+static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
+{
+	struct pci_dev *dev = drive->hwif->pci_dev;
+	unsigned long flags;
+	int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+	u32 tmp32;
+	u16 tmp16;
+	u8 speed, pio;
+
+	speed = ide_rate_filter(atiixp_ratemask(drive), xferspeed);
+
+	spin_lock_irqsave(&ide_lock, flags);
+
+	save_mdma_mode[drive->dn] = 0;
+	if (speed >= XFER_UDMA_0) {
+		pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16);
+		tmp16 &= ~(0x07 << (drive->dn * 4));
+		tmp16 |= ((speed & 0x07) << (drive->dn * 4));
+		pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16);
+	} else {
+		if ((speed >= XFER_MW_DMA_0) && (speed <= XFER_MW_DMA_2)) {
+			save_mdma_mode[drive->dn] = speed;
+			pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32);
+			tmp32 &= ~(0xff << timing_shift);
+			tmp32 |= (mdma_timing[speed & 0x03].recover_width << timing_shift) |
+				(mdma_timing[speed & 0x03].command_width << (timing_shift + 4));
+			pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32);
+		}
+	}
+
+	spin_unlock_irqrestore(&ide_lock, flags);
+
+	if (speed >= XFER_SW_DMA_0)
+		pio = atiixp_dma_2_pio(speed);
+	else
+		pio = speed - XFER_PIO_0;
+
+	atiixp_tuneproc(drive, pio);
+
+	return ide_config_drive_speed(drive, speed);
+}
+
+/**
+ *	atiixp_config_drive_for_dma	-	configure drive for DMA
+ *	@drive: IDE drive to configure
+ *
+ *	Set up a ATIIXP interface channel for the best available speed.
+ *	We prefer UDMA if it is available and then MWDMA. If DMA is
+ *	not available we switch to PIO and return 0.
+ */
+
+static int atiixp_config_drive_for_dma(ide_drive_t *drive)
+{
+	u8 speed = ide_dma_speed(drive, atiixp_ratemask(drive));
+
+	/* If no DMA speed was available then disable DMA and use PIO. */
+	if (!speed) {
+		u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
+		speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0;
+	}
+
+	(void) atiixp_speedproc(drive, speed);
+	return ide_dma_enable(drive);
+}
+
+/**
+ *	atiixp_dma_check	-	set up an IDE device
+ *	@drive: IDE drive to configure
+ *
+ *	Set up the ATIIXP interface for the best available speed on this
+ *	interface, preferring DMA to PIO.
+ */
+
+static int atiixp_dma_check(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	struct hd_driveid *id	= drive->id;
+	u8 tspeed, speed;
+
+	drive->init_speed = 0;
+
+	if ((id->capability & 1) && drive->autodma) {
+
+		if (ide_use_dma(drive)) {
+			if (atiixp_config_drive_for_dma(drive))
+				return hwif->ide_dma_on(drive);
+		}
+
+		goto fast_ata_pio;
+
+	} else if ((id->capability & 8) || (id->field_valid & 2)) {
+fast_ata_pio:
+		tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
+		speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0;
+		hwif->speedproc(drive, speed);
+		return hwif->ide_dma_off_quietly(drive);
+	}
+	/* IORDY not supported */
+	return 0;
+}
+
+/**
+ *	init_hwif_atiixp		-	fill in the hwif for the ATIIXP
+ *	@hwif: IDE interface
+ *
+ *	Set up the ide_hwif_t for the ATIIXP interface according to the
+ *	capabilities of the hardware.
+ */
+
+static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
+{
+	if (!hwif->irq)
+		hwif->irq = hwif->channel ? 15 : 14;
+
+	hwif->autodma = 0;
+	hwif->tuneproc = &atiixp_tuneproc;
+	hwif->speedproc = &atiixp_speedproc;
+	hwif->drives[0].autotune = 1;
+	hwif->drives[1].autotune = 1;
+
+	if (!hwif->dma_base)
+		return;
+
+	hwif->atapi_dma = 1;
+	hwif->ultra_mask = 0x3f;
+	hwif->mwdma_mask = 0x06;
+	hwif->swdma_mask = 0x04;
+
+	/* FIXME: proper cable detection needed */
+	hwif->udma_four = 1;
+	hwif->ide_dma_host_on = &atiixp_ide_dma_host_on;
+	hwif->ide_dma_host_off = &atiixp_ide_dma_host_off;
+	hwif->ide_dma_check = &atiixp_dma_check;
+	if (!noautodma)
+		hwif->autodma = 1;
+
+	hwif->drives[1].autodma = hwif->autodma;
+	hwif->drives[0].autodma = hwif->autodma;
+}
+
+static ide_pci_device_t atiixp_pci_info[] __devinitdata = {
+	{	/* 0 */
+		.name		= "ATIIXP",
+		.init_hwif	= init_hwif_atiixp,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
+		.bootable	= ON_BOARD,
+	}
+};
+
+/**
+ *	atiixp_init_one	-	called when a ATIIXP is found
+ *	@dev: the atiixp device
+ *	@id: the matching pci id
+ *
+ *	Called when the PCI registration layer (or the IDE initialization)
+ *	finds a device matching our IDE device tables.
+ */
+
+static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	return ide_setup_pci_device(dev, &atiixp_pci_info[id->driver_data]);
+}
+
+static struct pci_device_id atiixp_pci_tbl[] = {
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
+
+static struct pci_driver driver = {
+	.name		= "ATIIXP_IDE",
+	.id_table	= atiixp_pci_tbl,
+	.probe		= atiixp_init_one,
+};
+
+static int atiixp_ide_init(void)
+{
+	return ide_pci_register_driver(&driver);
+}
+
+module_init(atiixp_ide_init);
+
+MODULE_AUTHOR("HUI YU");
+MODULE_DESCRIPTION("PCI driver module for ATI IXP IDE");
+MODULE_LICENSE("GPL");