Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (58 commits)
  ide: remove ide_init_default_irq() macro
  ide: move default IDE ports setup to ide_generic host driver
  ide: remove obsoleted "idex=noprobe" kernel parameter (take 2)
  ide: remove needless hwif->irq check from ide_hwif_configure()
  ide: init hwif->{io_ports,irq} explicitly in legacy VLB host drivers
  ide: limit legacy VLB host drivers to alpha, x86 and mips
  cmd640: init hwif->{io_ports,irq} explicitly
  cmd640: cleanup setup_device_ptrs()
  ide: add ide-4drives host driver (take 3)
  ide: remove ppc ifdef from init_ide_data()
  ide: remove ide_default_io_ctl() macro
  ide: remove CONFIG_IDE_ARCH_OBSOLETE_INIT
  ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS (take 2)
  ppc/pmac: remove no longer needed IDE quirk
  ppc: don't include <linux/ide.h>
  ppc: remove ppc_ide_md
  ppc/pplus: remove ppc_ide_md.ide_init_hwif hook
  ppc/sandpoint: remove ppc_ide_md hooks
  ppc/lopec: remove ppc_ide_md hooks
  ppc/mpc8xx: remove ppc_ide_md hooks
  ...

1 files changed, 19 insertions, 6 deletions

diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index 78ca68e..88fe907 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -82,7 +82,7 @@
  * out how they setup those cycle time interfacing values, as they at Holtek
  * call them. IDESETUP.COM that is supplied with the drivers figures out
  * optimal values and fetches those values to drivers. I found out that
- * they use IDE_SELECT_REG to fetch timings to the ide board right after
+ * they use Select register to fetch timings to the ide board right after
  * interface switching. After that it was quite easy to add code to
  * ht6560b.c.
  *
@@ -127,6 +127,7 @@
  */
 static void ht6560b_selectproc (ide_drive_t *drive)
 {
+	ide_hwif_t *hwif = drive->hwif;
 	unsigned long flags;
 	static u8 current_select = 0;
 	static u8 current_timing = 0;
@@ -155,8 +156,8 @@ static void ht6560b_selectproc (ide_drive_t *drive)
 		/*
 		 * Set timing for this drive:
 		 */
-		outb(timing, IDE_SELECT_REG);
-		(void)inb(IDE_STATUS_REG);
+		outb(timing, hwif->io_ports[IDE_SELECT_OFFSET]);
+		(void)inb(hwif->io_ports[IDE_STATUS_OFFSET]);
 #ifdef DEBUG
 		printk("ht6560b: %s: select=%#x timing=%#x\n",
 			drive->name, select, timing);
@@ -193,9 +194,9 @@ static int __init try_to_init_ht6560b(void)
 	 * Ht6560b autodetected
 	 */
 	outb(HT_CONFIG_DEFAULT, HT_CONFIG_PORT);
-	outb(HT_TIMING_DEFAULT, 0x1f6);  /* IDE_SELECT_REG */
-	(void) inb(0x1f7);               /* IDE_STATUS_REG */
-	
+	outb(HT_TIMING_DEFAULT, 0x1f6);	/* Select register */
+	(void)inb(0x1f7);		/* Status register */
+
 	printk("ht6560b " HT6560B_VERSION
 	       ": chipset detected and initialized"
 #ifdef DEBUG
@@ -339,6 +340,7 @@ static int __init ht6560b_init(void)
 {
 	ide_hwif_t *hwif, *mate;
 	static u8 idx[4] = { 0, 1, 0xff, 0xff };
+	hw_regs_t hw[2];
 
 	if (probe_ht6560b == 0)
 		return -ENODEV;
@@ -357,6 +359,17 @@ static int __init ht6560b_init(void)
 		goto release_region;
 	}
 
+	memset(&hw, 0, sizeof(hw));
+
+	ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
+	hw[0].irq = 14;
+
+	ide_std_init_ports(&hw[1], 0x170, 0x376);
+	hw[1].irq = 15;
+
+	ide_init_port_hw(hwif, &hw[0]);
+	ide_init_port_hw(mate, &hw[1]);
+
 	hwif->selectproc = &ht6560b_selectproc;
 	hwif->set_pio_mode = &ht6560b_set_pio_mode;