ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 153 deletions

diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c
deleted file mode 100644
index 689b2e4..0000000
--- a/drivers/ide/legacy/dtc2278.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- *  Copyright (C) 1996  Linus Torvalds & author (see below)
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "dtc2278"
-
-/*
- * Changing this #undef to #define may solve start up problems in some systems.
- */
-#undef ALWAYS_SET_DTC2278_PIO_MODE
-
-/*
- * From: andy@cercle.cts.com (Dyan Wile)
- *
- * Below is a patch for DTC-2278 - alike software-programmable controllers
- * The code enables the secondary IDE controller and the PIO4 (3?) timings on
- * the primary (EIDE). You may probably have to enable the 32-bit support to
- * get the full speed. You better get the disk interrupts disabled ( hdparm -u0
- * /dev/hd.. ) for the drives connected to the EIDE interface. (I get my
- * filesystem  corrupted with -u1, but under heavy disk load only :-)
- *
- * This card is now forced to use the "serialize" feature,
- * and irq-unmasking is disallowed.  If io_32bit is enabled,
- * it must be done for BOTH drives on each interface.
- *
- * This code was written for the DTC2278E, but might work with any of these:
- *
- * DTC2278S has only a single IDE interface.
- * DTC2278D has two IDE interfaces and is otherwise identical to the S version.
- * DTC2278E also has serial ports and a printer port
- * DTC2278EB: has onboard BIOS, and "works like a charm" -- Kent Bradford <kent@theory.caltech.edu>
- *
- * There may be a fourth controller type. The S and D versions use the
- * Winbond chip, and I think the E version does also.
- *
- */
-
-static void sub22 (char b, char c)
-{
-	int i;
-
-	for(i = 0; i < 3; ++i) {
-		inb(0x3f6);
-		outb_p(b,0xb0);
-		inb(0x3f6);
-		outb_p(c,0xb4);
-		inb(0x3f6);
-		if(inb(0xb4) == c) {
-			outb_p(7,0xb0);
-			inb(0x3f6);
-			return;	/* success */
-		}
-	}
-}
-
-static DEFINE_SPINLOCK(dtc2278_lock);
-
-static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	unsigned long flags;
-
-	if (pio >= 3) {
-		spin_lock_irqsave(&dtc2278_lock, flags);
-		/*
-		 * This enables PIO mode4 (3?) on the first interface
-		 */
-		sub22(1,0xc3);
-		sub22(0,0xa0);
-		spin_unlock_irqrestore(&dtc2278_lock, flags);
-	} else {
-		/* we don't know how to set it back again.. */
-		/* Actually we do - there is a data sheet available for the
-		   Winbond but does anyone actually care */
-	}
-}
-
-static const struct ide_port_ops dtc2278_port_ops = {
-	.set_pio_mode		= dtc2278_set_pio_mode,
-};
-
-static const struct ide_port_info dtc2278_port_info __initdata = {
-	.name			= DRV_NAME,
-	.chipset		= ide_dtc2278,
-	.port_ops		= &dtc2278_port_ops,
-	.host_flags		= IDE_HFLAG_SERIALIZE |
-				  IDE_HFLAG_NO_UNMASK_IRQS |
-				  IDE_HFLAG_IO_32BIT |
-				  /* disallow ->io_32bit changes */
-				  IDE_HFLAG_NO_IO_32BIT |
-				  IDE_HFLAG_NO_DMA,
-	.pio_mask		= ATA_PIO4,
-};
-
-static int __init dtc2278_probe(void)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	/*
-	 * This enables the second interface
-	 */
-	outb_p(4,0xb0);
-	inb(0x3f6);
-	outb_p(0x20,0xb4);
-	inb(0x3f6);
-#ifdef ALWAYS_SET_DTC2278_PIO_MODE
-	/*
-	 * This enables PIO mode4 (3?) on the first interface
-	 * and may solve start-up problems for some people.
-	 */
-	sub22(1,0xc3);
-	sub22(0,0xa0);
-#endif
-	local_irq_restore(flags);
-
-	return ide_legacy_device_add(&dtc2278_port_info, 0);
-}
-
-static int probe_dtc2278;
-
-module_param_named(probe, probe_dtc2278, bool, 0);
-MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets");
-
-static int __init dtc2278_init(void)
-{
-	if (probe_dtc2278 == 0)
-		return -ENODEV;
-
-	if (dtc2278_probe()) {
-		printk(KERN_ERR "dtc2278: ide interfaces already in use!\n");
-		return -EBUSY;
-	}
-	return 0;
-}
-
-module_init(dtc2278_init);
-
-MODULE_AUTHOR("See Local File");
-MODULE_DESCRIPTION("support of DTC-2278 VLB IDE chipsets");
-MODULE_LICENSE("GPL");