Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 2211 insertions, 0 deletions

diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
new file mode 100644
index 0000000..36c0b74
--- /dev/null
+++ b/drivers/ide/ide-floppy.c
@@ -0,0 +1,2211 @@
+/*
+ * linux/drivers/ide/ide-floppy.c	Version 0.99	Feb 24 2002
+ *
+ * Copyright (C) 1996 - 1999 Gadi Oxman <gadio@netvision.net.il>
+ * Copyright (C) 2000 - 2002 Paul Bristow <paul@paulbristow.net>
+ */
+
+/*
+ * IDE ATAPI floppy driver.
+ *
+ * The driver currently doesn't have any fancy features, just the bare
+ * minimum read/write support.
+ *
+ * This driver supports the following IDE floppy drives:
+ *
+ * LS-120/240 SuperDisk
+ * Iomega Zip 100/250
+ * Iomega PC Card Clik!/PocketZip
+ *
+ * Many thanks to Lode Leroy <Lode.Leroy@www.ibase.be>, who tested so many
+ * ALPHA patches to this driver on an EASYSTOR LS-120 ATAPI floppy drive.
+ *
+ * Ver 0.1   Oct 17 96   Initial test version, mostly based on ide-tape.c.
+ * Ver 0.2   Oct 31 96   Minor changes.
+ * Ver 0.3   Dec  2 96   Fixed error recovery bug.
+ * Ver 0.4   Jan 26 97   Add support for the HDIO_GETGEO ioctl.
+ * Ver 0.5   Feb 21 97   Add partitions support.
+ *                       Use the minimum of the LBA and CHS capacities.
+ *                       Avoid hwgroup->rq == NULL on the last irq.
+ *                       Fix potential null dereferencing with DEBUG_LOG.
+ * Ver 0.8   Dec  7 97   Increase irq timeout from 10 to 50 seconds.
+ *                       Add media write-protect detection.
+ *                       Issue START command only if TEST UNIT READY fails.
+ *                       Add work-around for IOMEGA ZIP revision 21.D.
+ *                       Remove idefloppy_get_capabilities().
+ * Ver 0.9   Jul  4 99   Fix a bug which might have caused the number of
+ *                        bytes requested on each interrupt to be zero.
+ *                        Thanks to <shanos@es.co.nz> for pointing this out.
+ * Ver 0.9.sv Jan 6 01   Sam Varshavchik <mrsam@courier-mta.com>
+ *                       Implement low level formatting.  Reimplemented
+ *                       IDEFLOPPY_CAPABILITIES_PAGE, since we need the srfp
+ *                       bit.  My LS-120 drive barfs on
+ *                       IDEFLOPPY_CAPABILITIES_PAGE, but maybe it's just me.
+ *                       Compromise by not reporting a failure to get this
+ *                       mode page.  Implemented four IOCTLs in order to
+ *                       implement formatting.  IOCTls begin with 0x4600,
+ *                       0x46 is 'F' as in Format.
+ *            Jan 9 01   Userland option to select format verify.
+ *                       Added PC_SUPPRESS_ERROR flag - some idefloppy drives
+ *                       do not implement IDEFLOPPY_CAPABILITIES_PAGE, and
+ *                       return a sense error.  Suppress error reporting in
+ *                       this particular case in order to avoid spurious
+ *                       errors in syslog.  The culprit is
+ *                       idefloppy_get_capability_page(), so move it to
+ *                       idefloppy_begin_format() so that it's not used
+ *                       unless absolutely necessary.
+ *                       If drive does not support format progress indication
+ *                       monitor the dsc bit in the status register.
+ *                       Also, O_NDELAY on open will allow the device to be
+ *                       opened without a disk available.  This can be used to
+ *                       open an unformatted disk, or get the device capacity.
+ * Ver 0.91  Dec 11 99   Added IOMEGA Clik! drive support by 
+ *     		   <paul@paulbristow.net>
+ * Ver 0.92  Oct 22 00   Paul Bristow became official maintainer for this 
+ *           		   driver.  Included Powerbook internal zip kludge.
+ * Ver 0.93  Oct 24 00   Fixed bugs for Clik! drive
+ *                        no disk on insert and disk change now works
+ * Ver 0.94  Oct 27 00   Tidied up to remove strstr(Clik) everywhere
+ * Ver 0.95  Nov  7 00   Brought across to kernel 2.4
+ * Ver 0.96  Jan  7 01   Actually in line with release version of 2.4.0
+ *                       including set_bit patch from Rusty Russell
+ * Ver 0.97  Jul 22 01   Merge 0.91-0.96 onto 0.9.sv for ac series
+ * Ver 0.97.sv Aug 3 01  Backported from 2.4.7-ac3
+ * Ver 0.98  Oct 26 01   Split idefloppy_transfer_pc into two pieces to
+ *                        fix a lost interrupt problem. It appears the busy
+ *                        bit was being deasserted by my IOMEGA ATAPI ZIP 100
+ *                        drive before the drive was actually ready.
+ * Ver 0.98a Oct 29 01   Expose delay value so we can play.
+ * Ver 0.99  Feb 24 02   Remove duplicate code, modify clik! detection code 
+ *                        to support new PocketZip drives 
+ */
+
+#define IDEFLOPPY_VERSION "0.99.newide"
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/major.h>
+#include <linux/errno.h>
+#include <linux/genhd.h>
+#include <linux/slab.h>
+#include <linux/cdrom.h>
+#include <linux/ide.h>
+#include <linux/bitops.h>
+
+#include <asm/byteorder.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/unaligned.h>
+
+/*
+ *	The following are used to debug the driver.
+ */
+#define IDEFLOPPY_DEBUG_LOG		0
+#define IDEFLOPPY_DEBUG_INFO		0
+#define IDEFLOPPY_DEBUG_BUGS		1
+
+/* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
+#define IDEFLOPPY_DEBUG( fmt, args... )
+
+#if IDEFLOPPY_DEBUG_LOG
+#define debug_log printk
+#else
+#define debug_log(fmt, args... ) do {} while(0)
+#endif
+
+
+/*
+ *	Some drives require a longer irq timeout.
+ */
+#define IDEFLOPPY_WAIT_CMD		(5 * WAIT_CMD)
+
+/*
+ *	After each failed packet command we issue a request sense command
+ *	and retry the packet command IDEFLOPPY_MAX_PC_RETRIES times.
+ */
+#define IDEFLOPPY_MAX_PC_RETRIES	3
+
+/*
+ *	With each packet command, we allocate a buffer of
+ *	IDEFLOPPY_PC_BUFFER_SIZE bytes.
+ */
+#define IDEFLOPPY_PC_BUFFER_SIZE	256
+
+/*
+ *	In various places in the driver, we need to allocate storage
+ *	for packet commands and requests, which will remain valid while
+ *	we leave the driver to wait for an interrupt or a timeout event.
+ */
+#define IDEFLOPPY_PC_STACK		(10 + IDEFLOPPY_MAX_PC_RETRIES)
+
+/*
+ *	Our view of a packet command.
+ */
+typedef struct idefloppy_packet_command_s {
+	u8 c[12];				/* Actual packet bytes */
+	int retries;				/* On each retry, we increment retries */
+	int error;				/* Error code */
+	int request_transfer;			/* Bytes to transfer */
+	int actually_transferred;		/* Bytes actually transferred */
+	int buffer_size;			/* Size of our data buffer */
+	int b_count;				/* Missing/Available data on the current buffer */
+	struct request *rq;			/* The corresponding request */
+	u8 *buffer;				/* Data buffer */
+	u8 *current_position;			/* Pointer into the above buffer */
+	void (*callback) (ide_drive_t *);	/* Called when this packet command is completed */
+	u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE];	/* Temporary buffer */
+	unsigned long flags;			/* Status/Action bit flags: long for set_bit */
+} idefloppy_pc_t;
+
+/*
+ *	Packet command flag bits.
+ */
+#define	PC_ABORT			0	/* Set when an error is considered normal - We won't retry */
+#define PC_DMA_RECOMMENDED		2	/* 1 when we prefer to use DMA if possible */
+#define	PC_DMA_IN_PROGRESS		3	/* 1 while DMA in progress */
+#define	PC_DMA_ERROR			4	/* 1 when encountered problem during DMA */
+#define	PC_WRITING			5	/* Data direction */
+
+#define	PC_SUPPRESS_ERROR		6	/* Suppress error reporting */
+
+/*
+ *	Removable Block Access Capabilities Page
+ */
+typedef struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	unsigned	page_code	:6;	/* Page code - Should be 0x1b */
+	unsigned	reserved1_6	:1;	/* Reserved */
+	unsigned	ps		:1;	/* Should be 0 */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	unsigned	ps		:1;	/* Should be 0 */
+	unsigned	reserved1_6	:1;	/* Reserved */
+	unsigned	page_code	:6;	/* Page code - Should be 0x1b */
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+	u8		page_length;		/* Page Length - Should be 0xa */
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	unsigned	reserved2	:6;
+	unsigned	srfp		:1;	/* Supports reporting progress of format */
+	unsigned	sflp		:1;	/* System floppy type device */
+	unsigned	tlun		:3;	/* Total logical units supported by the device */
+	unsigned	reserved3	:3;
+	unsigned	sml		:1;	/* Single / Multiple lun supported */
+	unsigned	ncd		:1;	/* Non cd optical device */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	unsigned	sflp		:1;	/* System floppy type device */
+	unsigned	srfp		:1;	/* Supports reporting progress of format */
+	unsigned	reserved2	:6;
+	unsigned	ncd		:1;	/* Non cd optical device */
+	unsigned	sml		:1;	/* Single / Multiple lun supported */
+	unsigned	reserved3	:3;
+	unsigned	tlun		:3;	/* Total logical units supported by the device */
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+	u8		reserved[8];
+} idefloppy_capabilities_page_t;
+
+/*
+ *	Flexible disk page.
+ */
+typedef struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	unsigned	page_code	:6;	/* Page code - Should be 0x5 */
+	unsigned	reserved1_6	:1;	/* Reserved */
+	unsigned	ps		:1;	/* The device is capable of saving the page */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	unsigned	ps		:1;	/* The device is capable of saving the page */
+	unsigned	reserved1_6	:1;	/* Reserved */
+	unsigned	page_code	:6;	/* Page code - Should be 0x5 */
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+	u8		page_length;		/* Page Length - Should be 0x1e */
+	u16		transfer_rate;		/* In kilobits per second */
+	u8		heads, sectors;		/* Number of heads, Number of sectors per track */
+	u16		sector_size;		/* Byes per sector */
+	u16		cyls;			/* Number of cylinders */
+	u8		reserved10[10];
+	u8		motor_delay;		/* Motor off delay */
+	u8		reserved21[7];
+	u16		rpm;			/* Rotations per minute */
+	u8		reserved30[2];
+} idefloppy_flexible_disk_page_t;
+ 
+/*
+ *	Format capacity
+ */
+typedef struct {
+	u8		reserved[3];
+	u8		length;			/* Length of the following descriptors in bytes */
+} idefloppy_capacity_header_t;
+
+typedef struct {
+	u32		blocks;			/* Number of blocks */
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	unsigned	dc		:2;	/* Descriptor Code */
+	unsigned	reserved	:6;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	unsigned	reserved	:6;
+	unsigned	dc		:2;	/* Descriptor Code */
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+	u8		length_msb;		/* Block Length (MSB)*/
+	u16		length;			/* Block Length */
+} idefloppy_capacity_descriptor_t;
+
+#define CAPACITY_INVALID	0x00
+#define CAPACITY_UNFORMATTED	0x01
+#define CAPACITY_CURRENT	0x02
+#define CAPACITY_NO_CARTRIDGE	0x03
+
+/*
+ *	Most of our global data which we need to save even as we leave the
+ *	driver due to an interrupt or a timer event is stored in a variable
+ *	of type idefloppy_floppy_t, defined below.
+ */
+typedef struct ide_floppy_obj {
+	ide_drive_t	*drive;
+	ide_driver_t	*driver;
+	struct gendisk	*disk;
+	struct kref	kref;
+
+	/* Current packet command */
+	idefloppy_pc_t *pc;
+	/* Last failed packet command */
+	idefloppy_pc_t *failed_pc;
+	/* Packet command stack */
+	idefloppy_pc_t pc_stack[IDEFLOPPY_PC_STACK];
+	/* Next free packet command storage space */
+	int pc_stack_index;
+	struct request rq_stack[IDEFLOPPY_PC_STACK];
+	/* We implement a circular array */
+	int rq_stack_index;
+
+	/*
+	 *	Last error information
+	 */
+	u8 sense_key, asc, ascq;
+	/* delay this long before sending packet command */
+	u8 ticks;
+	int progress_indication;
+
+	/*
+	 *	Device information
+	 */
+	/* Current format */
+	int blocks, block_size, bs_factor;
+	/* Last format capacity */
+	idefloppy_capacity_descriptor_t capacity;
+	/* Copy of the flexible disk page */
+	idefloppy_flexible_disk_page_t flexible_disk_page;
+	/* Write protect */
+	int wp;
+	/* Supports format progress report */
+	int srfp;
+	/* Status/Action flags */
+	unsigned long flags;
+} idefloppy_floppy_t;
+
+#define IDEFLOPPY_TICKS_DELAY	3	/* default delay for ZIP 100 */
+
+/*
+ *	Floppy flag bits values.
+ */
+#define IDEFLOPPY_DRQ_INTERRUPT		0	/* DRQ interrupt device */
+#define IDEFLOPPY_MEDIA_CHANGED		1	/* Media may have changed */
+#define IDEFLOPPY_USE_READ12		2	/* Use READ12/WRITE12 or READ10/WRITE10 */
+#define	IDEFLOPPY_FORMAT_IN_PROGRESS	3	/* Format in progress */
+#define IDEFLOPPY_CLIK_DRIVE	        4       /* Avoid commands not supported in Clik drive */
+#define IDEFLOPPY_ZIP_DRIVE		5	/* Requires BH algorithm for packets */
+
+/*
+ *	ATAPI floppy drive packet commands
+ */
+#define IDEFLOPPY_FORMAT_UNIT_CMD	0x04
+#define IDEFLOPPY_INQUIRY_CMD		0x12
+#define IDEFLOPPY_MODE_SELECT_CMD	0x55
+#define IDEFLOPPY_MODE_SENSE_CMD	0x5a
+#define IDEFLOPPY_READ10_CMD		0x28
+#define IDEFLOPPY_READ12_CMD		0xa8
+#define IDEFLOPPY_READ_CAPACITY_CMD	0x23
+#define IDEFLOPPY_REQUEST_SENSE_CMD	0x03
+#define IDEFLOPPY_PREVENT_REMOVAL_CMD	0x1e
+#define IDEFLOPPY_SEEK_CMD		0x2b
+#define IDEFLOPPY_START_STOP_CMD	0x1b
+#define IDEFLOPPY_TEST_UNIT_READY_CMD	0x00
+#define IDEFLOPPY_VERIFY_CMD		0x2f
+#define IDEFLOPPY_WRITE10_CMD		0x2a
+#define IDEFLOPPY_WRITE12_CMD		0xaa
+#define IDEFLOPPY_WRITE_VERIFY_CMD	0x2e
+
+/*
+ *	Defines for the mode sense command
+ */
+#define MODE_SENSE_CURRENT		0x00
+#define MODE_SENSE_CHANGEABLE		0x01
+#define MODE_SENSE_DEFAULT		0x02 
+#define MODE_SENSE_SAVED		0x03
+
+/*
+ *	IOCTLs used in low-level formatting.
+ */
+
+#define	IDEFLOPPY_IOCTL_FORMAT_SUPPORTED	0x4600
+#define	IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY	0x4601
+#define	IDEFLOPPY_IOCTL_FORMAT_START		0x4602
+#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS	0x4603
+
+#if 0
+/*
+ *	Special requests for our block device strategy routine.
+ */
+#define	IDEFLOPPY_FIRST_RQ	90
+
+/*
+ * 	IDEFLOPPY_PC_RQ is used to queue a packet command in the request queue.
+ */
+#define	IDEFLOPPY_PC_RQ		90
+
+#define IDEFLOPPY_LAST_RQ	90
+
+/*
+ *	A macro which can be used to check if a given request command
+ *	originated in the driver or in the buffer cache layer.
+ */
+#define IDEFLOPPY_RQ_CMD(cmd) 	((cmd >= IDEFLOPPY_FIRST_RQ) && (cmd <= IDEFLOPPY_LAST_RQ))
+
+#endif
+
+/*
+ *	Error codes which are returned in rq->errors to the higher part
+ *	of the driver.
+ */
+#define	IDEFLOPPY_ERROR_GENERAL		101
+
+/*
+ *	The following is used to format the general configuration word of
+ *	the ATAPI IDENTIFY DEVICE command.
+ */
+struct idefloppy_id_gcw {	
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	unsigned packet_size		:2;	/* Packet Size */
+	unsigned reserved234		:3;	/* Reserved */
+	unsigned drq_type		:2;	/* Command packet DRQ type */
+	unsigned removable		:1;	/* Removable media */
+	unsigned device_type		:5;	/* Device type */
+	unsigned reserved13		:1;	/* Reserved */
+	unsigned protocol		:2;	/* Protocol type */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	unsigned protocol		:2;	/* Protocol type */
+	unsigned reserved13		:1;	/* Reserved */
+	unsigned device_type		:5;	/* Device type */
+	unsigned removable		:1;	/* Removable media */
+	unsigned drq_type		:2;	/* Command packet DRQ type */
+	unsigned reserved234		:3;	/* Reserved */
+	unsigned packet_size		:2;	/* Packet Size */
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+};
+
+/*
+ *	INQUIRY packet command - Data Format
+ */
+typedef struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	unsigned	device_type	:5;	/* Peripheral Device Type */
+	unsigned	reserved0_765	:3;	/* Peripheral Qualifier - Reserved */
+	unsigned	reserved1_6t0	:7;	/* Reserved */
+	unsigned	rmb		:1;	/* Removable Medium Bit */
+	unsigned	ansi_version	:3;	/* ANSI Version */
+	unsigned	ecma_version	:3;	/* ECMA Version */
+	unsigned	iso_version	:2;	/* ISO Version */
+	unsigned	response_format :4;	/* Response Data Format */
+	unsigned	reserved3_45	:2;	/* Reserved */
+	unsigned	reserved3_6	:1;	/* TrmIOP - Reserved */
+	unsigned	reserved3_7	:1;	/* AENC - Reserved */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	unsigned	reserved0_765	:3;	/* Peripheral Qualifier - Reserved */
+	unsigned	device_type	:5;	/* Peripheral Device Type */
+	unsigned	rmb		:1;	/* Removable Medium Bit */
+	unsigned	reserved1_6t0	:7;	/* Reserved */
+	unsigned	iso_version	:2;	/* ISO Version */
+	unsigned	ecma_version	:3;	/* ECMA Version */
+	unsigned	ansi_version	:3;	/* ANSI Version */
+	unsigned	reserved3_7	:1;	/* AENC - Reserved */
+	unsigned	reserved3_6	:1;	/* TrmIOP - Reserved */
+	unsigned	reserved3_45	:2;	/* Reserved */
+	unsigned	response_format :4;	/* Response Data Format */
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+	u8		additional_length;	/* Additional Length (total_length-4) */
+	u8		rsv5, rsv6, rsv7;	/* Reserved */
+	u8		vendor_id[8];		/* Vendor Identification */
+	u8		product_id[16];		/* Product Identification */
+	u8		revision_level[4];	/* Revision Level */
+	u8		vendor_specific[20];	/* Vendor Specific - Optional */
+	u8		reserved56t95[40];	/* Reserved - Optional */
+						/* Additional information may be returned */
+} idefloppy_inquiry_result_t;
+
+/*
+ *	REQUEST SENSE packet command result - Data Format.
+ */
+typedef struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	unsigned	error_code	:7;	/* Current error (0x70) */
+	unsigned	valid		:1;	/* The information field conforms to SFF-8070i */
+	u8		reserved1	:8;	/* Reserved */
+	unsigned	sense_key	:4;	/* Sense Key */
+	unsigned	reserved2_4	:1;	/* Reserved */
+	unsigned	ili		:1;	/* Incorrect Length Indicator */
+	unsigned	reserved2_67	:2;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	unsigned	valid		:1;	/* The information field conforms to SFF-8070i */
+	unsigned	error_code	:7;	/* Current error (0x70) */
+	u8		reserved1	:8;	/* Reserved */
+	unsigned	reserved2_67	:2;
+	unsigned	ili		:1;	/* Incorrect Length Indicator */
+	unsigned	reserved2_4	:1;	/* Reserved */
+	unsigned	sense_key	:4;	/* Sense Key */
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+	u32		information __attribute__ ((packed));
+	u8		asl;			/* Additional sense length (n-7) */
+	u32		command_specific;	/* Additional command specific information */
+	u8		asc;			/* Additional Sense Code */
+	u8		ascq;			/* Additional Sense Code Qualifier */
+	u8		replaceable_unit_code;	/* Field Replaceable Unit Code */
+	u8		sksv[3];
+	u8		pad[2];			/* Padding to 20 bytes */
+} idefloppy_request_sense_result_t;
+
+/*
+ *	Pages of the SELECT SENSE / MODE SENSE packet commands.
+ */
+#define	IDEFLOPPY_CAPABILITIES_PAGE	0x1b
+#define IDEFLOPPY_FLEXIBLE_DISK_PAGE	0x05
+
+/*
+ *	Mode Parameter Header for the MODE SENSE packet command
+ */
+typedef struct {
+	u16		mode_data_length;	/* Length of the following data transfer */
+	u8		medium_type;		/* Medium Type */
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	unsigned	reserved3	:7;
+	unsigned	wp		:1;	/* Write protect */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	unsigned	wp		:1;	/* Write protect */
+	unsigned	reserved3	:7;
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+	u8		reserved[4];
+} idefloppy_mode_parameter_header_t;
+
+static DECLARE_MUTEX(idefloppy_ref_sem);
+
+#define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref)
+
+#define ide_floppy_g(disk) \
+	container_of((disk)->private_data, struct ide_floppy_obj, driver)
+
+static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
+{
+	struct ide_floppy_obj *floppy = NULL;
+
+	down(&idefloppy_ref_sem);
+	floppy = ide_floppy_g(disk);
+	if (floppy)
+		kref_get(&floppy->kref);
+	up(&idefloppy_ref_sem);
+	return floppy;
+}
+
+static void ide_floppy_release(struct kref *);
+
+static void ide_floppy_put(struct ide_floppy_obj *floppy)
+{
+	down(&idefloppy_ref_sem);
+	kref_put(&floppy->kref, ide_floppy_release);
+	up(&idefloppy_ref_sem);
+}
+
+/*
+ *	Too bad. The drive wants to send us data which we are not ready to accept.
+ *	Just throw it away.
+ */
+static void idefloppy_discard_data (ide_drive_t *drive, unsigned int bcount)
+{
+	while (bcount--)
+		(void) HWIF(drive)->INB(IDE_DATA_REG);
+}
+
+#if IDEFLOPPY_DEBUG_BUGS
+static void idefloppy_write_zeros (ide_drive_t *drive, unsigned int bcount)
+{
+	while (bcount--)
+		HWIF(drive)->OUTB(0, IDE_DATA_REG);
+}
+#endif /* IDEFLOPPY_DEBUG_BUGS */
+
+
+/*
+ *	idefloppy_do_end_request is used to finish servicing a request.
+ *
+ *	For read/write requests, we will call ide_end_request to pass to the
+ *	next buffer.
+ */
+static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+	struct request *rq = HWGROUP(drive)->rq;
+	int error;
+
+	debug_log(KERN_INFO "Reached idefloppy_end_request\n");
+
+	switch (uptodate) {
+		case 0: error = IDEFLOPPY_ERROR_GENERAL; break;
+		case 1: error = 0; break;
+		default: error = uptodate;
+	}
+	if (error)
+		floppy->failed_pc = NULL;
+	/* Why does this happen? */
+	if (!rq)
+		return 0;
+	if (!(rq->flags & REQ_SPECIAL)) { //if (!IDEFLOPPY_RQ_CMD (rq->cmd)) {
+		/* our real local end request function */
+		ide_end_request(drive, uptodate, nsecs);
+		return 0;
+	}
+	rq->errors = error;
+	/* fixme: need to move this local also */
+	ide_end_drive_cmd(drive, 0, 0);
+	return 0;
+}
+
+static void idefloppy_input_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount)
+{
+	struct request *rq = pc->rq;
+	struct bio_vec *bvec;
+	struct bio *bio;
+	unsigned long flags;
+	char *data;
+	int count, i, done = 0;
+
+	rq_for_each_bio(bio, rq) {
+		bio_for_each_segment(bvec, bio, i) {
+			if (!bcount)
+				break;
+
+			count = min(bvec->bv_len, bcount);
+
+			data = bvec_kmap_irq(bvec, &flags);
+			drive->hwif->atapi_input_bytes(drive, data, count);
+			bvec_kunmap_irq(data, &flags);
+
+			bcount -= count;
+			pc->b_count += count;
+			done += count;
+		}
+	}
+
+	idefloppy_do_end_request(drive, 1, done >> 9);
+
+	if (bcount) {
+		printk(KERN_ERR "%s: leftover data in idefloppy_input_buffers, bcount == %d\n", drive->name, bcount);
+		idefloppy_discard_data(drive, bcount);
+	}
+}
+
+static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount)
+{
+	struct request *rq = pc->rq;
+	struct bio *bio;
+	struct bio_vec *bvec;
+	unsigned long flags;
+	int count, i, done = 0;
+	char *data;
+
+	rq_for_each_bio(bio, rq) {
+		bio_for_each_segment(bvec, bio, i) {
+			if (!bcount)
+				break;
+
+			count = min(bvec->bv_len, bcount);
+
+			data = bvec_kmap_irq(bvec, &flags);
+			drive->hwif->atapi_output_bytes(drive, data, count);
+			bvec_kunmap_irq(data, &flags);
+
+			bcount -= count;
+			pc->b_count += count;
+			done += count;
+		}
+	}
+
+	idefloppy_do_end_request(drive, 1, done >> 9);
+
+	if (bcount) {
+		printk(KERN_ERR "%s: leftover data in idefloppy_output_buffers, bcount == %d\n", drive->name, bcount);
+		idefloppy_write_zeros(drive, bcount);
+	}
+}
+
+static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc)
+{
+	struct request *rq = pc->rq;
+	struct bio *bio = rq->bio;
+
+	while ((bio = rq->bio) != NULL)
+		idefloppy_do_end_request(drive, 1, 0);
+}
+
+/*
+ *	idefloppy_queue_pc_head generates a new packet command request in front
+ *	of the request queue, before the current request, so that it will be
+ *	processed immediately, on the next pass through the driver.
+ */
+static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struct request *rq)
+{
+	struct ide_floppy_obj *floppy = drive->driver_data;
+
+	ide_init_drive_cmd(rq);
+	rq->buffer = (char *) pc;
+	rq->flags = REQ_SPECIAL;	//rq->cmd = IDEFLOPPY_PC_RQ;
+	rq->rq_disk = floppy->disk;
+	(void) ide_do_drive_cmd(drive, rq, ide_preempt);
+}
+
+static idefloppy_pc_t *idefloppy_next_pc_storage (ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+
+	if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK)
+		floppy->pc_stack_index=0;
+	return (&floppy->pc_stack[floppy->pc_stack_index++]);
+}
+
+static struct request *idefloppy_next_rq_storage (ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+
+	if (floppy->rq_stack_index == IDEFLOPPY_PC_STACK)
+		floppy->rq_stack_index = 0;
+	return (&floppy->rq_stack[floppy->rq_stack_index++]);
+}
+
+/*
+ *	idefloppy_analyze_error is called on each failed packet command retry
+ *	to analyze the request sense.
+ */
+static void idefloppy_analyze_error (ide_drive_t *drive,idefloppy_request_sense_result_t *result)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+
+	floppy->sense_key = result->sense_key;
+	floppy->asc = result->asc;
+	floppy->ascq = result->ascq;
+	floppy->progress_indication = result->sksv[0] & 0x80 ?
+		(u16)get_unaligned((u16 *)(result->sksv+1)):0x10000;
+	if (floppy->failed_pc)
+		debug_log(KERN_INFO "ide-floppy: pc = %x, sense key = %x, "
+			"asc = %x, ascq = %x\n", floppy->failed_pc->c[0],
+			result->sense_key, result->asc, result->ascq);
+	else
+		debug_log(KERN_INFO "ide-floppy: sense key = %x, asc = %x, "
+			"ascq = %x\n", result->sense_key,
+			result->asc, result->ascq);
+}
+
+static void idefloppy_request_sense_callback (ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+
+	debug_log(KERN_INFO "ide-floppy: Reached %s\n", __FUNCTION__);
+	
+	if (!floppy->pc->error) {
+		idefloppy_analyze_error(drive,(idefloppy_request_sense_result_t *) floppy->pc->buffer);
+		idefloppy_do_end_request(drive, 1, 0);
+	} else {
+		printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting request!\n");
+		idefloppy_do_end_request(drive, 0, 0);
+	}
+}
+
+/*
+ *	General packet command callback function.
+ */
+static void idefloppy_pc_callback (ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+	
+	debug_log(KERN_INFO "ide-floppy: Reached %s\n", __FUNCTION__);
+
+	idefloppy_do_end_request(drive, floppy->pc->error ? 0 : 1, 0);
+}
+
+/*
+ *	idefloppy_init_pc initializes a packet command.
+ */
+static void idefloppy_init_pc (idefloppy_pc_t *pc)
+{
+	memset(pc->c, 0, 12);
+	pc->retries = 0;
+	pc->flags = 0;
+	pc->request_transfer = 0;
+	pc->buffer = pc->pc_buffer;
+	pc->buffer_size = IDEFLOPPY_PC_BUFFER_SIZE;
+	pc->callback = &idefloppy_pc_callback;
+}
+
+static void idefloppy_create_request_sense_cmd (idefloppy_pc_t *pc)
+{
+	idefloppy_init_pc(pc);	
+	pc->c[0] = IDEFLOPPY_REQUEST_SENSE_CMD;
+	pc->c[4] = 255;
+	pc->request_transfer = 18;
+	pc->callback = &idefloppy_request_sense_callback;
+}
+
+/*
+ *	idefloppy_retry_pc is called when an error was detected during the
+ *	last packet command. We queue a request sense packet command in
+ *	the head of the request list.
+ */
+static void idefloppy_retry_pc (ide_drive_t *drive)
+{
+	idefloppy_pc_t *pc;
+	struct request *rq;
+	atapi_error_t error;
+
+	error.all = HWIF(drive)->INB(IDE_ERROR_REG);
+	pc = idefloppy_next_pc_storage(drive);
+	rq = idefloppy_next_rq_storage(drive);
+	idefloppy_create_request_sense_cmd(pc);
+	idefloppy_queue_pc_head(drive, pc, rq);
+}
+
+/*
+ *	idefloppy_pc_intr is the usual interrupt handler which will be called
+ *	during a packet command.
+ */
+static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+	atapi_status_t status;
+	atapi_bcount_t bcount;
+	atapi_ireason_t ireason;
+	idefloppy_pc_t *pc = floppy->pc;
+	struct request *rq = pc->rq;
+	unsigned int temp;
+
+	debug_log(KERN_INFO "ide-floppy: Reached %s interrupt handler\n",
+		__FUNCTION__);
+
+	if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+		if (HWIF(drive)->ide_dma_end(drive)) {
+			set_bit(PC_DMA_ERROR, &pc->flags);
+		} else {
+			pc->actually_transferred = pc->request_transfer;
+			idefloppy_update_buffers(drive, pc);
+		}
+		debug_log(KERN_INFO "ide-floppy: DMA finished\n");
+	}
+
+	/* Clear the interrupt */
+	status.all = HWIF(drive)->INB(IDE_STATUS_REG);
+
+	if (!status.b.drq) {			/* No more interrupts */
+		debug_log(KERN_INFO "Packet command completed, %d bytes "
+			"transferred\n", pc->actually_transferred);
+		clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
+
+		local_irq_enable();
+
+		if (status.b.check || test_bit(PC_DMA_ERROR, &pc->flags)) {
+			/* Error detected */
+			debug_log(KERN_INFO "ide-floppy: %s: I/O error\n",
+				drive->name);
+			rq->errors++;
+			if (pc->c[0] == IDEFLOPPY_REQUEST_SENSE_CMD) {
+				printk(KERN_ERR "ide-floppy: I/O error in "
+					"request sense command\n");
+				return ide_do_reset(drive);
+			}
+			/* Retry operation */
+			idefloppy_retry_pc(drive);
+			/* queued, but not started */
+			return ide_stopped;
+		}
+		pc->error = 0;
+		if (floppy->failed_pc == pc)
+			floppy->failed_pc = NULL;
+		/* Command finished - Call the callback function */
+		pc->callback(drive);
+		return ide_stopped;
+	}
+
+	if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+		printk(KERN_ERR "ide-floppy: The floppy wants to issue "
+			"more interrupts in DMA mode\n");
+		(void)__ide_dma_off(drive);
+		return ide_do_reset(drive);
+	}
+
+	/* Get the number of bytes to transfer */
+	bcount.b.high = HWIF(drive)->INB(IDE_BCOUNTH_REG);
+	bcount.b.low = HWIF(drive)->INB(IDE_BCOUNTL_REG);
+	/* on this interrupt */
+	ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
+
+	if (ireason.b.cod) {
+		printk(KERN_ERR "ide-floppy: CoD != 0 in idefloppy_pc_intr\n");
+		return ide_do_reset(drive);
+	}
+	if (ireason.b.io == test_bit(PC_WRITING, &pc->flags)) {
+		/* Hopefully, we will never get here */
+		printk(KERN_ERR "ide-floppy: We wanted to %s, ",
+			ireason.b.io ? "Write":"Read");
+		printk(KERN_ERR "but the floppy wants us to %s !\n",
+			ireason.b.io ? "Read":"Write");
+		return ide_do_reset(drive);
+	}
+	if (!test_bit(PC_WRITING, &pc->flags)) {
+		/* Reading - Check that we have enough space */
+		temp = pc->actually_transferred + bcount.all;
+		if (temp > pc->request_transfer) {
+			if (temp > pc->buffer_size) {
+				printk(KERN_ERR "ide-floppy: The floppy wants "
+					"to send us more data than expected "
+					"- discarding data\n");
+				idefloppy_discard_data(drive,bcount.all);
+				if (HWGROUP(drive)->handler != NULL)
+					BUG();
+				ide_set_handler(drive,
+						&idefloppy_pc_intr,
+						IDEFLOPPY_WAIT_CMD,
+						NULL);
+				return ide_started;
+			}
+			debug_log(KERN_NOTICE "ide-floppy: The floppy wants to "
+				"send us more data than expected - "
+				"allowing transfer\n");
+		}
+	}
+	if (test_bit(PC_WRITING, &pc->flags)) {
+		if (pc->buffer != NULL)
+			/* Write the current buffer */
+			HWIF(drive)->atapi_output_bytes(drive,
+						pc->current_position,
+						bcount.all);
+		else
+			idefloppy_output_buffers(drive, pc, bcount.all);
+	} else {
+		if (pc->buffer != NULL)
+			/* Read the current buffer */
+			HWIF(drive)->atapi_input_bytes(drive,
+						pc->current_position,
+						bcount.all);
+		else
+			idefloppy_input_buffers(drive, pc, bcount.all);
+	}
+	/* Update the current position */
+	pc->actually_transferred += bcount.all;
+	pc->current_position += bcount.all;
+
+	if (HWGROUP(drive)->handler != NULL)
+		BUG();
+	ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);		/* And set the interrupt handler again */
+	return ide_started;
+}
+
+/*
+ * This is the original routine that did the packet transfer.
+ * It fails at high speeds on the Iomega ZIP drive, so there's a slower version
+ * for that drive below. The algorithm is chosen based on drive type
+ */
+static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive)
+{
+	ide_startstop_t startstop;
+	idefloppy_floppy_t *floppy = drive->driver_data;
+	atapi_ireason_t ireason;
+
+	if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+		printk(KERN_ERR "ide-floppy: Strange, packet command "
+				"initiated yet DRQ isn't asserted\n");
+		return startstop;
+	}
+	ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
+	if (!ireason.b.cod || ireason.b.io) {
+		printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while "
+				"issuing a packet command\n");
+		return ide_do_reset(drive);
+	}
+	if (HWGROUP(drive)->handler != NULL)
+		BUG();
+	/* Set the interrupt routine */
+	ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
+	/* Send the actual packet */
+	HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12);
+	return ide_started;
+}
+
+
+/*
+ * What we have here is a classic case of a top half / bottom half
+ * interrupt service routine. In interrupt mode, the device sends
+ * an interrupt to signal it's ready to receive a packet. However,
+ * we need to delay about 2-3 ticks before issuing the packet or we
+ * gets in trouble.
+ *
+ * So, follow carefully. transfer_pc1 is called as an interrupt (or
+ * directly). In either case, when the device says it's ready for a 
+ * packet, we schedule the packet transfer to occur about 2-3 ticks
+ * later in transfer_pc2.
+ */
+static int idefloppy_transfer_pc2 (ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+
+	/* Send the actual packet */
+	HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12);
+	/* Timeout for the packet command */
+	return IDEFLOPPY_WAIT_CMD;
+}
+
+static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+	ide_startstop_t startstop;
+	atapi_ireason_t ireason;
+
+	if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+		printk(KERN_ERR "ide-floppy: Strange, packet command "
+				"initiated yet DRQ isn't asserted\n");
+		return startstop;
+	}
+	ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
+	if (!ireason.b.cod || ireason.b.io) {
+		printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) "
+				"while issuing a packet command\n");
+		return ide_do_reset(drive);
+	}
+	/* 
+	 * The following delay solves a problem with ATAPI Zip 100 drives
+	 * where the Busy flag was apparently being deasserted before the
+	 * unit was ready to receive data. This was happening on a
+	 * 1200 MHz Athlon system. 10/26/01 25msec is too short,
+	 * 40 and 50msec work well. idefloppy_pc_intr will not be actually
+	 * used until after the packet is moved in about 50 msec.
+	 */
+	if (HWGROUP(drive)->handler != NULL)
+		BUG();
+	ide_set_handler(drive, 
+	  &idefloppy_pc_intr, 		/* service routine for packet command */
+	  floppy->ticks,		/* wait this long before "failing" */
+	  &idefloppy_transfer_pc2);	/* fail == transfer_pc2 */
+	return ide_started;
+}
+
+/**
+ * idefloppy_should_report_error()
+ *
+ * Supresses error messages resulting from Medium not present
+ */
+static inline int idefloppy_should_report_error(idefloppy_floppy_t *floppy)
+{
+	if (floppy->sense_key == 0x02 &&
+	    floppy->asc       == 0x3a &&
+	    floppy->ascq      == 0x00)
+		return 0;
+	return 1;
+}
+
+/*
+ *	Issue a packet command
+ */
+static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *pc)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+	ide_hwif_t *hwif = drive->hwif;
+	atapi_feature_t feature;
+	atapi_bcount_t bcount;
+	ide_handler_t *pkt_xfer_routine;
+
+#if IDEFLOPPY_DEBUG_BUGS
+	if (floppy->pc->c[0] == IDEFLOPPY_REQUEST_SENSE_CMD &&
+	    pc->c[0] == IDEFLOPPY_REQUEST_SENSE_CMD) {
+		printk(KERN_ERR "ide-floppy: possible ide-floppy.c bug - "
+			"Two request sense in serial were issued\n");
+	}
+#endif /* IDEFLOPPY_DEBUG_BUGS */
+
+	if (floppy->failed_pc == NULL &&
+	    pc->c[0] != IDEFLOPPY_REQUEST_SENSE_CMD)
+		floppy->failed_pc = pc;
+	/* Set the current packet command */
+	floppy->pc = pc;
+
+	if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES ||
+	    test_bit(PC_ABORT, &pc->flags)) {
+		/*
+		 *	We will "abort" retrying a packet command in case
+		 *	a legitimate error code was received.
+		 */
+		if (!test_bit(PC_ABORT, &pc->flags)) {
+			if (!test_bit(PC_SUPPRESS_ERROR, &pc->flags)) {
+				if (idefloppy_should_report_error(floppy))
+					printk(KERN_ERR "ide-floppy: %s: I/O error, "
+					       "pc = %2x, key = %2x, "
+					       "asc = %2x, ascq = %2x\n",
+					       drive->name, pc->c[0],
+					       floppy->sense_key,
+					       floppy->asc, floppy->ascq);
+			}
+			/* Giving up */
+			pc->error = IDEFLOPPY_ERROR_GENERAL;
+		}
+		floppy->failed_pc = NULL;
+		pc->callback(drive);
+		return ide_stopped;
+	}
+
+	debug_log(KERN_INFO "Retry number - %d\n",pc->retries);
+
+	pc->retries++;
+	/* We haven't transferred any data yet */
+	pc->actually_transferred = 0;
+	pc->current_position = pc->buffer;
+	bcount.all = min(pc->request_transfer, 63 * 1024);
+
+	if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) {
+		(void)__ide_dma_off(drive);
+	}
+	feature.all = 0;
+
+	if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
+		feature.b.dma = !hwif->dma_setup(drive);
+
+	if (IDE_CONTROL_REG)
+		HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG);
+	/* Use PIO/DMA */
+	HWIF(drive)->OUTB(feature.all, IDE_FEATURE_REG);
+	HWIF(drive)->OUTB(bcount.b.high, IDE_BCOUNTH_REG);
+	HWIF(drive)->OUTB(bcount.b.low, IDE_BCOUNTL_REG);
+	HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG);
+
+	if (feature.b.dma) {	/* Begin DMA, if necessary */
+		set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
+		hwif->dma_start(drive);
+	}
+
+	/* Can we transfer the packet when we get the interrupt or wait? */
+	if (test_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags)) {
+		/* wait */
+		pkt_xfer_routine = &idefloppy_transfer_pc1;
+	} else {
+		/* immediate */
+		pkt_xfer_routine = &idefloppy_transfer_pc;
+	}
+	
+	if (test_bit (IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags)) {
+		/* Issue the packet command */
+		ide_execute_command(drive, WIN_PACKETCMD,
+				pkt_xfer_routine,
+				IDEFLOPPY_WAIT_CMD,
+				NULL);
+		return ide_started;
+	} else {
+		/* Issue the packet command */
+		HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG);
+		return (*pkt_xfer_routine) (drive);
+	}
+}
+
+static void idefloppy_rw_callback (ide_drive_t *drive)
+{
+	debug_log(KERN_INFO "ide-floppy: Reached idefloppy_rw_callback\n");
+
+	idefloppy_do_end_request(drive, 1, 0);
+	return;
+}
+
+static void idefloppy_create_prevent_cmd (idefloppy_pc_t *pc, int prevent)
+{
+	debug_log(KERN_INFO "ide-floppy: creating prevent removal command, "
+		"prevent = %d\n", prevent);
+
+	idefloppy_init_pc(pc);
+	pc->c[0] = IDEFLOPPY_PREVENT_REMOVAL_CMD;
+	pc->c[4] = prevent;
+}
+
+static void idefloppy_create_read_capacity_cmd (idefloppy_pc_t *pc)
+{
+	idefloppy_init_pc(pc);
+	pc->c[0] = IDEFLOPPY_READ_CAPACITY_CMD;
+	pc->c[7] = 255;
+	pc->c[8] = 255;
+	pc->request_transfer = 255;
+}
+
+static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l,
+					      int flags)
+{
+	idefloppy_init_pc(pc);
+	pc->c[0] = IDEFLOPPY_FORMAT_UNIT_CMD;
+	pc->c[1] = 0x17;
+
+	memset(pc->buffer, 0, 12);
+	pc->buffer[1] = 0xA2;
+	/* Default format list header, u8 1: FOV/DCRT/IMM bits set */
+
+	if (flags & 1)				/* Verify bit on... */
+		pc->buffer[1] ^= 0x20;		/* ... turn off DCRT bit */
+	pc->buffer[3] = 8;
+
+	put_unaligned(htonl(b), (unsigned int *)(&pc->buffer[4]));
+	put_unaligned(htonl(l), (unsigned int *)(&pc->buffer[8]));
+	pc->buffer_size=12;
+	set_bit(PC_WRITING, &pc->flags);
+}
+
+/*
+ *	A mode sense command is used to "sense" floppy parameters.
+ */
+static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code, u8 type)
+{
+	u16 length = sizeof(idefloppy_mode_parameter_header_t);
+	
+	idefloppy_init_pc(pc);
+	pc->c[0] = IDEFLOPPY_MODE_SENSE_CMD;
+	pc->c[1] = 0;
+	pc->c[2] = page_code + (type << 6);
+
+	switch (page_code) {
+		case IDEFLOPPY_CAPABILITIES_PAGE:
+			length += 12;
+			break;
+		case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
+			length += 32;
+			break;
+		default:
+			printk(KERN_ERR "ide-floppy: unsupported page code "
+				"in create_mode_sense_cmd\n");
+	}
+	put_unaligned(htons(length), (u16 *) &pc->c[7]);
+	pc->request_transfer = length;
+}
+
+static void idefloppy_create_start_stop_cmd (idefloppy_pc_t *pc, int start)
+{
+	idefloppy_init_pc(pc);
+	pc->c[0] = IDEFLOPPY_START_STOP_CMD;
+	pc->c[4] = start;
+}
+
+static void idefloppy_create_test_unit_ready_cmd(idefloppy_pc_t *pc)
+{
+	idefloppy_init_pc(pc);
+	pc->c[0] = IDEFLOPPY_TEST_UNIT_READY_CMD;
+}
+
+static void idefloppy_create_rw_cmd (idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq, unsigned long sector)
+{
+	int block = sector / floppy->bs_factor;
+	int blocks = rq->nr_sectors / floppy->bs_factor;
+	int cmd = rq_data_dir(rq);
+
+	debug_log("create_rw1%d_cmd: block == %d, blocks == %d\n",
+		2 * test_bit (IDEFLOPPY_USE_READ12, &floppy->flags),
+		block, blocks);
+
+	idefloppy_init_pc(pc);
+	if (test_bit(IDEFLOPPY_USE_READ12, &floppy->flags)) {
+		pc->c[0] = cmd == READ ? IDEFLOPPY_READ12_CMD : IDEFLOPPY_WRITE12_CMD;
+		put_unaligned(htonl(blocks), (unsigned int *) &pc->c[6]);
+	} else {
+		pc->c[0] = cmd == READ ? IDEFLOPPY_READ10_CMD : IDEFLOPPY_WRITE10_CMD;
+		put_unaligned(htons(blocks), (unsigned short *) &pc->c[7]);
+	}
+	put_unaligned(htonl(block), (unsigned int *) &pc->c[2]);
+	pc->callback = &idefloppy_rw_callback;
+	pc->rq = rq;
+	pc->b_count = cmd == READ ? 0 : rq->bio->bi_size;
+	if (rq->flags & REQ_RW)
+		set_bit(PC_WRITING, &pc->flags);
+	pc->buffer = NULL;
+	pc->request_transfer = pc->buffer_size = blocks * floppy->block_size;
+	set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+}
+
+static int
+idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq)
+{
+	/*
+	 * just support eject for now, it would not be hard to make the
+	 * REQ_BLOCK_PC support fully-featured
+	 */
+	if (rq->cmd[0] != IDEFLOPPY_START_STOP_CMD)
+		return 1;
+
+	idefloppy_init_pc(pc);
+	memcpy(pc->c, rq->cmd, sizeof(pc->c));
+	return 0;
+}
+
+/*
+ *	idefloppy_do_request is our request handling function.	
+ */
+static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request *rq, sector_t block_s)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+	idefloppy_pc_t *pc;
+	unsigned long block = (unsigned long)block_s;
+
+	debug_log(KERN_INFO "rq_status: %d, dev: %s, flags: %lx, errors: %d\n",
+			rq->rq_status,
+			rq->rq_disk ? rq->rq_disk->disk_name ? "?",
+			rq->flags, rq->errors);
+	debug_log(KERN_INFO "sector: %ld, nr_sectors: %ld, "
+			"current_nr_sectors: %d\n", (long)rq->sector,
+			rq->nr_sectors, rq->current_nr_sectors);
+
+	if (rq->errors >= ERROR_MAX) {
+		if (floppy->failed_pc != NULL) {
+			if (idefloppy_should_report_error(floppy))
+				printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x,"
+				       " key = %2x, asc = %2x, ascq = %2x\n",
+				       drive->name, floppy->failed_pc->c[0],
+				       floppy->sense_key, floppy->asc, floppy->ascq);
+		}
+		else
+			printk(KERN_ERR "ide-floppy: %s: I/O error\n",
+				drive->name);
+		idefloppy_do_end_request(drive, 0, 0);
+		return ide_stopped;
+	}
+	if (rq->flags & REQ_CMD) {
+		if (((long)rq->sector % floppy->bs_factor) ||
+		    (rq->nr_sectors % floppy->bs_factor)) {
+			printk("%s: unsupported r/w request size\n",
+				drive->name);
+			idefloppy_do_end_request(drive, 0, 0);
+			return ide_stopped;
+		}
+		pc = idefloppy_next_pc_storage(drive);
+		idefloppy_create_rw_cmd(floppy, pc, rq, block);
+	} else if (rq->flags & REQ_SPECIAL) {
+		pc = (idefloppy_pc_t *) rq->buffer;
+	} else if (rq->flags & REQ_BLOCK_PC) {
+		pc = idefloppy_next_pc_storage(drive);
+		if (idefloppy_blockpc_cmd(floppy, pc, rq)) {
+			idefloppy_do_end_request(drive, 0, 0);
+			return ide_stopped;
+		}
+	} else {
+		blk_dump_rq_flags(rq,
+			"ide-floppy: unsupported command in queue");
+		idefloppy_do_end_request(drive, 0, 0);
+		return ide_stopped;
+	}
+
+	pc->rq = rq;
+	return idefloppy_issue_pc(drive, pc);
+}
+
+/*
+ *	idefloppy_queue_pc_tail adds a special packet command request to the
+ *	tail of the request queue, and waits for it to be serviced.
+ */
+static int idefloppy_queue_pc_tail (ide_drive_t *drive,idefloppy_pc_t *pc)
+{
+	struct ide_floppy_obj *floppy = drive->driver_data;
+	struct request rq;
+
+	ide_init_drive_cmd (&rq);
+	rq.buffer = (char *) pc;
+	rq.flags = REQ_SPECIAL;		//	rq.cmd = IDEFLOPPY_PC_RQ;
+	rq.rq_disk = floppy->disk;
+
+	return ide_do_drive_cmd(drive, &rq, ide_wait);
+}
+
+/*
+ *	Look at the flexible disk page parameters. We will ignore the CHS
+ *	capacity parameters and use the LBA parameters instead.
+ */
+static int idefloppy_get_flexible_disk_page (ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+	idefloppy_pc_t pc;
+	idefloppy_mode_parameter_header_t *header;
+	idefloppy_flexible_disk_page_t *page;
+	int capacity, lba_capacity;
+
+	idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE, MODE_SENSE_CURRENT);
+	if (idefloppy_queue_pc_tail(drive,&pc)) {
+		printk(KERN_ERR "ide-floppy: Can't get flexible disk "
+			"page parameters\n");
+		return 1;
+	}
+	header = (idefloppy_mode_parameter_header_t *) pc.buffer;
+	floppy->wp = header->wp;
+	set_disk_ro(floppy->disk, floppy->wp);
+	page = (idefloppy_flexible_disk_page_t *) (header + 1);
+
+	page->transfer_rate = ntohs(page->transfer_rate);
+	page->sector_size = ntohs(page->sector_size);
+	page->cyls = ntohs(page->cyls);
+	page->rpm = ntohs(page->rpm);
+	capacity = page->cyls * page->heads * page->sectors * page->sector_size;
+	if (memcmp (page, &floppy->flexible_disk_page, sizeof (idefloppy_flexible_disk_page_t)))
+		printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, "
+				"%d sector size, %d rpm\n",
+			drive->name, capacity / 1024, page->cyls,
+			page->heads, page->sectors,
+			page->transfer_rate / 8, page->sector_size, page->rpm);
+
+	floppy->flexible_disk_page = *page;
+	drive->bios_cyl = page->cyls;
+	drive->bios_head = page->heads;
+	drive->bios_sect = page->sectors;
+	lba_capacity = floppy->blocks * floppy->block_size;
+	if (capacity < lba_capacity) {
+		printk(KERN_NOTICE "%s: The disk reports a capacity of %d "
+			"bytes, but the drive only handles %d\n",
+			drive->name, lba_capacity, capacity);
+		floppy->blocks = floppy->block_size ? capacity / floppy->block_size : 0;
+	}
+	return 0;
+}
+
+static int idefloppy_get_capability_page(ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+	idefloppy_pc_t pc;
+	idefloppy_mode_parameter_header_t *header;
+	idefloppy_capabilities_page_t *page;
+
+	floppy->srfp = 0;
+	idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE,
+						 MODE_SENSE_CURRENT);
+
+	set_bit(PC_SUPPRESS_ERROR, &pc.flags);
+	if (idefloppy_queue_pc_tail(drive,&pc)) {
+		return 1;
+	}
+
+	header = (idefloppy_mode_parameter_header_t *) pc.buffer;
+	page= (idefloppy_capabilities_page_t *)(header+1);
+	floppy->srfp = page->srfp;
+	return (0);
+}
+
+/*
+ *	Determine if a media is present in the floppy drive, and if so,
+ *	its LBA capacity.
+ */
+static int idefloppy_get_capacity (ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+	idefloppy_pc_t pc;
+	idefloppy_capacity_header_t *header;
+	idefloppy_capacity_descriptor_t *descriptor;
+	int i, descriptors, rc = 1, blocks, length;
+	
+	drive->bios_cyl = 0;
+	drive->bios_head = drive->bios_sect = 0;
+	floppy->blocks = floppy->bs_factor = 0;
+	set_capacity(floppy->disk, 0);
+
+	idefloppy_create_read_capacity_cmd(&pc);
+	if (idefloppy_queue_pc_tail(drive, &pc)) {
+		printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
+		return 1;
+	}
+	header = (idefloppy_capacity_header_t *) pc.buffer;
+	descriptors = header->length / sizeof(idefloppy_capacity_descriptor_t);
+	descriptor = (idefloppy_capacity_descriptor_t *) (header + 1);
+
+	for (i = 0; i < descriptors; i++, descriptor++) {
+		blocks = descriptor->blocks = ntohl(descriptor->blocks);
+		length = descriptor->length = ntohs(descriptor->length);
+
+		if (!i) 
+		{
+		switch (descriptor->dc) {
+		/* Clik! drive returns this instead of CAPACITY_CURRENT */
+		case CAPACITY_UNFORMATTED:
+			if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags))
+                                /*
+				 * If it is not a clik drive, break out
+				 * (maintains previous driver behaviour)
+				 */
+				break;
+		case CAPACITY_CURRENT:
+			/* Normal Zip/LS-120 disks */
+			if (memcmp(descriptor, &floppy->capacity, sizeof (idefloppy_capacity_descriptor_t)))
+				printk(KERN_INFO "%s: %dkB, %d blocks, %d "
+					"sector size\n", drive->name,
+					blocks * length / 1024, blocks, length);
+			floppy->capacity = *descriptor;
+			if (!length || length % 512) {
+				printk(KERN_NOTICE "%s: %d bytes block size "
+					"not supported\n", drive->name, length);
+			} else {
+                                floppy->blocks = blocks;
+                                floppy->block_size = length;
+                                if ((floppy->bs_factor = length / 512) != 1)
+                                        printk(KERN_NOTICE "%s: warning: non "
+						"512 bytes block size not "
+						"fully supported\n",
+						drive->name);
+                                rc = 0;
+			}
+			break;
+		case CAPACITY_NO_CARTRIDGE:
+			/*
+			 * This is a KERN_ERR so it appears on screen
+			 * for the user to see
+			 */
+			printk(KERN_ERR "%s: No disk in drive\n", drive->name);
+			break;
+		case CAPACITY_INVALID:
+			printk(KERN_ERR "%s: Invalid capacity for disk "
+				"in drive\n", drive->name);
+			break;
+		}
+		}
+		if (!i) {
+			debug_log( "Descriptor 0 Code: %d\n",
+				descriptor->dc);
+		}
+		debug_log( "Descriptor %d: %dkB, %d blocks, %d "
+			"sector size\n", i, blocks * length / 1024, blocks,
+			length);
+	}
+
+	/* Clik! disk does not support get_flexible_disk_page */
+        if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
+		(void) idefloppy_get_flexible_disk_page(drive);
+	}
+
+	set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor);
+	return rc;
+}
+
+/*
+** Obtain the list of formattable capacities.
+** Very similar to idefloppy_get_capacity, except that we push the capacity
+** descriptors to userland, instead of our own structures.
+**
+** Userland gives us the following structure:
+**
+** struct idefloppy_format_capacities {
+**        int nformats;
+**        struct {
+**                int nblocks;
+**                int blocksize;
+**                } formats[];
+**        } ;
+**
+** userland initializes nformats to the number of allocated formats[]
+** records.  On exit we set nformats to the number of records we've
+** actually initialized.
+**
+*/
+
+static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
+{
+        idefloppy_pc_t pc;
+	idefloppy_capacity_header_t *header;
+        idefloppy_capacity_descriptor_t *descriptor;
+	int i, descriptors, blocks, length;
+	int u_array_size;
+	int u_index;
+	int __user *argp;
+
+	if (get_user(u_array_size, arg))
+		return (-EFAULT);
+
+	if (u_array_size <= 0)
+		return (-EINVAL);
+
+	idefloppy_create_read_capacity_cmd(&pc);
+	if (idefloppy_queue_pc_tail(drive, &pc)) {
+		printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
+                return (-EIO);
+        }
+        header = (idefloppy_capacity_header_t *) pc.buffer;
+        descriptors = header->length /
+		sizeof(idefloppy_capacity_descriptor_t);
+	descriptor = (idefloppy_capacity_descriptor_t *) (header + 1);
+
+	u_index = 0;
+	argp = arg + 1;
+
+	/*
+	** We always skip the first capacity descriptor.  That's the
+	** current capacity.  We are interested in the remaining descriptors,
+	** the formattable capacities.
+	*/
+
+	for (i=0; i<descriptors; i++, descriptor++) {
+		if (u_index >= u_array_size)
+			break;	/* User-supplied buffer too small */
+		if (i == 0)
+			continue;	/* Skip the first descriptor */
+
+		blocks = ntohl(descriptor->blocks);
+		length = ntohs(descriptor->length);
+
+		if (put_user(blocks, argp))
+			return(-EFAULT);
+		++argp;
+
+		if (put_user(length, argp))
+			return (-EFAULT);
+		++argp;
+
+		++u_index;
+	}
+
+	if (put_user(u_index, arg))
+		return (-EFAULT);
+	return (0);
+}
+
+/*
+** Send ATAPI_FORMAT_UNIT to the drive.
+**
+** Userland gives us the following structure:
+**
+** struct idefloppy_format_command {
+**        int nblocks;
+**        int blocksize;
+**        int flags;
+**        } ;
+**
+** flags is a bitmask, currently, the only defined flag is:
+**
+**        0x01 - verify media after format.
+*/
+
+static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg)
+{
+	int blocks;
+	int length;
+	int flags;
+	idefloppy_pc_t pc;
+
+	if (get_user(blocks, arg) ||
+	    get_user(length, arg+1) ||
+	    get_user(flags, arg+2)) {
+		return (-EFAULT);
+	}
+
+	/* Get the SFRP bit */
+	(void) idefloppy_get_capability_page(drive);
+	idefloppy_create_format_unit_cmd(&pc, blocks, length, flags);
+	if (idefloppy_queue_pc_tail(drive, &pc)) {
+                return (-EIO);
+	}
+
+	return (0);
+}
+
+/*
+** Get ATAPI_FORMAT_UNIT progress indication.
+**
+** Userland gives a pointer to an int.  The int is set to a progresss
+** indicator 0-65536, with 65536=100%.
+**
+** If the drive does not support format progress indication, we just check
+** the dsc bit, and return either 0 or 65536.
+*/
+
+static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+	idefloppy_pc_t pc;
+	int progress_indication = 0x10000;
+
+	if (floppy->srfp) {
+		idefloppy_create_request_sense_cmd(&pc);
+		if (idefloppy_queue_pc_tail(drive, &pc)) {
+			return (-EIO);
+		}
+
+		if (floppy->sense_key == 2 &&
+		    floppy->asc == 4 &&
+		    floppy->ascq == 4) {
+			progress_indication = floppy->progress_indication;
+		}
+		/* Else assume format_unit has finished, and we're
+		** at 0x10000 */
+	} else {
+		atapi_status_t status;
+		unsigned long flags;
+
+		local_irq_save(flags);
+		status.all = HWIF(drive)->INB(IDE_STATUS_REG);
+		local_irq_restore(flags);
+
+		progress_indication = !status.b.dsc ? 0 : 0x10000;
+	}
+	if (put_user(progress_indication, arg))
+		return (-EFAULT);
+
+	return (0);
+}
+
+/*
+ *	Return the current floppy capacity.
+ */
+static sector_t idefloppy_capacity (ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+	unsigned long capacity = floppy->blocks * floppy->bs_factor;
+
+	return capacity;
+}
+
+/*
+ *	idefloppy_identify_device checks if we can support a drive,
+ *	based on the ATAPI IDENTIFY command results.
+ */
+static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
+{
+	struct idefloppy_id_gcw gcw;
+#if IDEFLOPPY_DEBUG_INFO
+	u16 mask,i;
+	char buffer[80];
+#endif /* IDEFLOPPY_DEBUG_INFO */
+
+	*((u16 *) &gcw) = id->config;
+
+#ifdef CONFIG_PPC
+	/* kludge for Apple PowerBook internal zip */
+	if ((gcw.device_type == 5) &&
+	    !strstr(id->model, "CD-ROM") &&
+	    strstr(id->model, "ZIP"))
+		gcw.device_type = 0;			
+#endif
+
+#if IDEFLOPPY_DEBUG_INFO
+	printk(KERN_INFO "Dumping ATAPI Identify Device floppy parameters\n");
+	switch (gcw.protocol) {
+		case 0: case 1: sprintf(buffer, "ATA");break;
+		case 2:	sprintf(buffer, "ATAPI");break;
+		case 3: sprintf(buffer, "Reserved (Unknown to ide-floppy)");break;
+	}
+	printk(KERN_INFO "Protocol Type: %s\n", buffer);
+	switch (gcw.device_type) {
+		case 0: sprintf(buffer, "Direct-access Device");break;
+		case 1: sprintf(buffer, "Streaming Tape Device");break;
+		case 2: case 3: case 4: sprintf (buffer, "Reserved");break;
+		case 5: sprintf(buffer, "CD-ROM Device");break;
+		case 6: sprintf(buffer, "Reserved");
+		case 7: sprintf(buffer, "Optical memory Device");break;
+		case 0x1f: sprintf(buffer, "Unknown or no Device type");break;
+		default: sprintf(buffer, "Reserved");
+	}
+	printk(KERN_INFO "Device Type: %x - %s\n", gcw.device_type, buffer);
+	printk(KERN_INFO "Removable: %s\n",gcw.removable ? "Yes":"No");	
+	switch (gcw.drq_type) {
+		case 0: sprintf(buffer, "Microprocessor DRQ");break;
+		case 1: sprintf(buffer, "Interrupt DRQ");break;
+		case 2: sprintf(buffer, "Accelerated DRQ");break;
+		case 3: sprintf(buffer, "Reserved");break;
+	}
+	printk(KERN_INFO "Command Packet DRQ Type: %s\n", buffer);
+	switch (gcw.packet_size) {
+		case 0: sprintf(buffer, "12 bytes");break;
+		case 1: sprintf(buffer, "16 bytes");break;
+		default: sprintf(buffer, "Reserved");break;
+	}
+	printk(KERN_INFO "Command Packet Size: %s\n", buffer);
+	printk(KERN_INFO "Model: %.40s\n",id->model);
+	printk(KERN_INFO "Firmware Revision: %.8s\n",id->fw_rev);
+	printk(KERN_INFO "Serial Number: %.20s\n",id->serial_no);
+	printk(KERN_INFO "Write buffer size(?): %d bytes\n",id->buf_size*512);
+	printk(KERN_INFO "DMA: %s",id->capability & 0x01 ? "Yes\n":"No\n");
+	printk(KERN_INFO "LBA: %s",id->capability & 0x02 ? "Yes\n":"No\n");
+	printk(KERN_INFO "IORDY can be disabled: %s",id->capability & 0x04 ? "Yes\n":"No\n");
+	printk(KERN_INFO "IORDY supported: %s",id->capability & 0x08 ? "Yes\n":"Unknown\n");
+	printk(KERN_INFO "ATAPI overlap supported: %s",id->capability & 0x20 ? "Yes\n":"No\n");
+	printk(KERN_INFO "PIO Cycle Timing Category: %d\n",id->tPIO);
+	printk(KERN_INFO "DMA Cycle Timing Category: %d\n",id->tDMA);
+	printk(KERN_INFO "Single Word DMA supported modes:\n");
+	for (i=0,mask=1;i<8;i++,mask=mask << 1) {
+		if (id->dma_1word & mask)
+			printk(KERN_INFO "   Mode %d%s\n", i,
+			(id->dma_1word & (mask << 8)) ? " (active)" : "");
+	}
+	printk(KERN_INFO "Multi Word DMA supported modes:\n");
+	for (i=0,mask=1;i<8;i++,mask=mask << 1) {
+		if (id->dma_mword & mask)
+			printk(KERN_INFO "   Mode %d%s\n", i,
+			(id->dma_mword & (mask << 8)) ? " (active)" : "");
+	}
+	if (id->field_valid & 0x0002) {
+		printk(KERN_INFO "Enhanced PIO Modes: %s\n",
+			id->eide_pio_modes & 1 ? "Mode 3":"None");
+		if (id->eide_dma_min == 0)
+			sprintf(buffer, "Not supported");
+		else
+			sprintf(buffer, "%d ns",id->eide_dma_min);
+		printk(KERN_INFO "Minimum Multi-word DMA cycle per word: %s\n", buffer);
+		if (id->eide_dma_time == 0)
+			sprintf(buffer, "Not supported");
+		else
+			sprintf(buffer, "%d ns",id->eide_dma_time);
+		printk(KERN_INFO "Manufacturer\'s Recommended Multi-word cycle: %s\n", buffer);
+		if (id->eide_pio == 0)
+			sprintf(buffer, "Not supported");
+		else
+			sprintf(buffer, "%d ns",id->eide_pio);
+		printk(KERN_INFO "Minimum PIO cycle without IORDY: %s\n",
+			buffer);
+		if (id->eide_pio_iordy == 0)
+			sprintf(buffer, "Not supported");
+		else
+			sprintf(buffer, "%d ns",id->eide_pio_iordy);
+		printk(KERN_INFO "Minimum PIO cycle with IORDY: %s\n", buffer);
+	} else
+		printk(KERN_INFO "According to the device, fields 64-70 are not valid.\n");
+#endif /* IDEFLOPPY_DEBUG_INFO */
+
+	if (gcw.protocol != 2)
+		printk(KERN_ERR "ide-floppy: Protocol is not ATAPI\n");
+	else if (gcw.device_type != 0)
+		printk(KERN_ERR "ide-floppy: Device type is not set to floppy\n");
+	else if (!gcw.removable)
+		printk(KERN_ERR "ide-floppy: The removable flag is not set\n");
+	else if (gcw.drq_type == 3) {
+		printk(KERN_ERR "ide-floppy: Sorry, DRQ type %d not supported\n", gcw.drq_type);
+	} else if (gcw.packet_size != 0) {
+		printk(KERN_ERR "ide-floppy: Packet size is not 12 bytes long\n");
+	} else
+		return 1;
+	return 0;
+}
+
+static void idefloppy_add_settings(ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+
+/*
+ *			drive	setting name	read/write	ioctl	ioctl		data type	min	max	mul_factor	div_factor	data pointer		set function
+ */
+	ide_add_setting(drive,	"bios_cyl",		SETTING_RW,					-1,			-1,			TYPE_INT,	0,	1023,				1,	1,	&drive->bios_cyl,		NULL);
+	ide_add_setting(drive,	"bios_head",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	255,				1,	1,	&drive->bios_head,		NULL);
+	ide_add_setting(drive,	"bios_sect",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	63,				1,	1,	&drive->bios_sect,		NULL);
+	ide_add_setting(drive,	"ticks",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	255,				1,	1,	&floppy->ticks,		NULL);
+}
+
+/*
+ *	Driver initialization.
+ */
+static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy)
+{
+	struct idefloppy_id_gcw gcw;
+
+	*((u16 *) &gcw) = drive->id->config;
+	floppy->pc = floppy->pc_stack;
+	if (gcw.drq_type == 1)
+		set_bit(IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags);
+	/*
+	 *	We used to check revisions here. At this point however
+	 *	I'm giving up. Just assume they are all broken, its easier.
+	 *
+	 *	The actual reason for the workarounds was likely
+	 *	a driver bug after all rather than a firmware bug,
+	 *	and the workaround below used to hide it. It should
+	 *	be fixed as of version 1.9, but to be on the safe side
+	 *	we'll leave the limitation below for the 2.2.x tree.
+	 */
+
+	if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) {
+		set_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags);
+		/* This value will be visible in the /proc/ide/hdx/settings */
+		floppy->ticks = IDEFLOPPY_TICKS_DELAY;
+		blk_queue_max_sectors(drive->queue, 64);
+	}
+
+	/*
+	*      Guess what?  The IOMEGA Clik! drive also needs the
+	*      above fix.  It makes nasty clicking noises without
+	*      it, so please don't remove this.
+	*/
+	if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) {
+		blk_queue_max_sectors(drive->queue, 64);
+		set_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags);
+	}
+
+
+	(void) idefloppy_get_capacity(drive);
+	idefloppy_add_settings(drive);
+}
+
+static int idefloppy_cleanup (ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy = drive->driver_data;
+	struct gendisk *g = floppy->disk;
+
+	if (ide_unregister_subdriver(drive))
+		return 1;
+
+	del_gendisk(g);
+
+	ide_floppy_put(floppy);
+
+	return 0;
+}
+
+static void ide_floppy_release(struct kref *kref)
+{
+	struct ide_floppy_obj *floppy = to_ide_floppy(kref);
+	ide_drive_t *drive = floppy->drive;
+	struct gendisk *g = floppy->disk;
+
+	drive->driver_data = NULL;
+	g->private_data = NULL;
+	put_disk(g);
+	kfree(floppy);
+}
+
+#ifdef CONFIG_PROC_FS
+
+static int proc_idefloppy_read_capacity
+	(char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+	ide_drive_t*drive = (ide_drive_t *)data;
+	int len;
+
+	len = sprintf(page,"%llu\n", (long long)idefloppy_capacity(drive));
+	PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
+}
+
+static ide_proc_entry_t idefloppy_proc[] = {
+	{ "capacity",	S_IFREG|S_IRUGO,	proc_idefloppy_read_capacity, NULL },
+	{ "geometry",	S_IFREG|S_IRUGO,	proc_ide_read_geometry,	NULL },
+	{ NULL, 0, NULL, NULL }
+};
+
+#else
+
+#define	idefloppy_proc	NULL
+
+#endif	/* CONFIG_PROC_FS */
+
+static int idefloppy_attach(ide_drive_t *drive);
+
+/*
+ *	IDE subdriver functions, registered with ide.c
+ */
+static ide_driver_t idefloppy_driver = {
+	.owner			= THIS_MODULE,
+	.name			= "ide-floppy",
+	.version		= IDEFLOPPY_VERSION,
+	.media			= ide_floppy,
+	.busy			= 0,
+	.supports_dsc_overlap	= 0,
+	.cleanup		= idefloppy_cleanup,
+	.do_request		= idefloppy_do_request,
+	.end_request		= idefloppy_do_end_request,
+	.error			= __ide_error,
+	.abort			= __ide_abort,
+	.proc			= idefloppy_proc,
+	.attach			= idefloppy_attach,
+	.drives			= LIST_HEAD_INIT(idefloppy_driver.drives),
+};
+
+static int idefloppy_open(struct inode *inode, struct file *filp)
+{
+	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct ide_floppy_obj *floppy;
+	ide_drive_t *drive;
+	idefloppy_pc_t pc;
+	int ret = 0;
+
+	debug_log(KERN_INFO "Reached idefloppy_open\n");
+
+	if (!(floppy = ide_floppy_get(disk)))
+		return -ENXIO;
+
+	drive = floppy->drive;
+
+	drive->usage++;
+
+	if (drive->usage == 1) {
+		clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+		/* Just in case */
+
+		idefloppy_create_test_unit_ready_cmd(&pc);
+		if (idefloppy_queue_pc_tail(drive, &pc)) {
+			idefloppy_create_start_stop_cmd(&pc, 1);
+			(void) idefloppy_queue_pc_tail(drive, &pc);
+		}
+
+		if (idefloppy_get_capacity (drive)
+		   && (filp->f_flags & O_NDELAY) == 0
+		    /*
+		    ** Allow O_NDELAY to open a drive without a disk, or with
+		    ** an unreadable disk, so that we can get the format
+		    ** capacity of the drive or begin the format - Sam
+		    */
+		    ) {
+			drive->usage--;
+			ret = -EIO;
+			goto out_put_floppy;
+		}
+
+		if (floppy->wp && (filp->f_mode & 2)) {
+			drive->usage--;
+			ret = -EROFS;
+			goto out_put_floppy;
+		}
+		set_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags);
+		/* IOMEGA Clik! drives do not support lock/unlock commands */
+                if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
+			idefloppy_create_prevent_cmd(&pc, 1);
+			(void) idefloppy_queue_pc_tail(drive, &pc);
+		}
+		check_disk_change(inode->i_bdev);
+	} else if (test_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags)) {
+		drive->usage--;
+		ret = -EBUSY;
+		goto out_put_floppy;
+	}
+	return 0;
+
+out_put_floppy:
+	ide_floppy_put(floppy);
+	return ret;
+}
+
+static int idefloppy_release(struct inode *inode, struct file *filp)
+{
+	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct ide_floppy_obj *floppy = ide_floppy_g(disk);
+	ide_drive_t *drive = floppy->drive;
+	idefloppy_pc_t pc;
+	
+	debug_log(KERN_INFO "Reached idefloppy_release\n");
+
+	if (drive->usage == 1) {
+		/* IOMEGA Clik! drives do not support lock/unlock commands */
+                if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
+			idefloppy_create_prevent_cmd(&pc, 0);
+			(void) idefloppy_queue_pc_tail(drive, &pc);
+		}
+
+		clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+	}
+	drive->usage--;
+
+	ide_floppy_put(floppy);
+
+	return 0;
+}
+
+static int idefloppy_ioctl(struct inode *inode, struct file *file,
+			unsigned int cmd, unsigned long arg)
+{
+	struct block_device *bdev = inode->i_bdev;
+	struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
+	ide_drive_t *drive = floppy->drive;
+	void __user *argp = (void __user *)arg;
+	int err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
+	int prevent = (arg) ? 1 : 0;
+	idefloppy_pc_t pc;
+	if (err != -EINVAL)
+		return err;
+
+	switch (cmd) {
+	case CDROMEJECT:
+		prevent = 0;
+		/* fall through */
+	case CDROM_LOCKDOOR:
+		if (drive->usage > 1)
+			return -EBUSY;
+
+		/* The IOMEGA Clik! Drive doesn't support this command - no room for an eject mechanism */
+                if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
+			idefloppy_create_prevent_cmd(&pc, prevent);
+			(void) idefloppy_queue_pc_tail(drive, &pc);
+		}
+		if (cmd == CDROMEJECT) {
+			idefloppy_create_start_stop_cmd(&pc, 2);
+			(void) idefloppy_queue_pc_tail(drive, &pc);
+		}
+		return 0;
+	case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
+		return 0;
+	case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
+		return idefloppy_get_format_capacities(drive, argp);
+	case IDEFLOPPY_IOCTL_FORMAT_START:
+
+		if (!(file->f_mode & 2))
+			return -EPERM;
+
+		if (drive->usage > 1) {
+			/* Don't format if someone is using the disk */
+
+			clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS,
+				  &floppy->flags);
+			return -EBUSY;
+		}
+
+		set_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+
+		err = idefloppy_begin_format(drive, argp);
+		if (err)
+			clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+		return err;
+		/*
+		** Note, the bit will be cleared when the device is
+		** closed.  This is the cleanest way to handle the
+		** situation where the drive does not support
+		** format progress reporting.
+		*/
+	case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
+		return idefloppy_get_format_progress(drive, argp);
+	}
+ 	return -EINVAL;
+}
+
+static int idefloppy_media_changed(struct gendisk *disk)
+{
+	struct ide_floppy_obj *floppy = ide_floppy_g(disk);
+	ide_drive_t *drive = floppy->drive;
+
+	/* do not scan partitions twice if this is a removable device */
+	if (drive->attach) {
+		drive->attach = 0;
+		return 0;
+	}
+	return test_and_clear_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags);
+}
+
+static int idefloppy_revalidate_disk(struct gendisk *disk)
+{
+	struct ide_floppy_obj *floppy = ide_floppy_g(disk);
+	set_capacity(disk, idefloppy_capacity(floppy->drive));
+	return 0;
+}
+
+static struct block_device_operations idefloppy_ops = {
+	.owner		= THIS_MODULE,
+	.open		= idefloppy_open,
+	.release	= idefloppy_release,
+	.ioctl		= idefloppy_ioctl,
+	.media_changed	= idefloppy_media_changed,
+	.revalidate_disk= idefloppy_revalidate_disk
+};
+
+static int idefloppy_attach (ide_drive_t *drive)
+{
+	idefloppy_floppy_t *floppy;
+	struct gendisk *g;
+
+	if (!strstr("ide-floppy", drive->driver_req))
+		goto failed;
+	if (!drive->present)
+		goto failed;
+	if (drive->media != ide_floppy)
+		goto failed;
+	if (!idefloppy_identify_device (drive, drive->id)) {
+		printk (KERN_ERR "ide-floppy: %s: not supported by this version of ide-floppy\n", drive->name);
+		goto failed;
+	}
+	if (drive->scsi) {
+		printk("ide-floppy: passing drive %s to ide-scsi emulation.\n", drive->name);
+		goto failed;
+	}
+	if ((floppy = (idefloppy_floppy_t *) kmalloc (sizeof (idefloppy_floppy_t), GFP_KERNEL)) == NULL) {
+		printk (KERN_ERR "ide-floppy: %s: Can't allocate a floppy structure\n", drive->name);
+		goto failed;
+	}
+
+	g = alloc_disk(1 << PARTN_BITS);
+	if (!g)
+		goto out_free_floppy;
+
+	ide_init_disk(g, drive);
+
+	if (ide_register_subdriver(drive, &idefloppy_driver)) {
+		printk (KERN_ERR "ide-floppy: %s: Failed to register the driver with ide.c\n", drive->name);
+		goto out_put_disk;
+	}
+
+	memset(floppy, 0, sizeof(*floppy));
+
+	kref_init(&floppy->kref);
+
+	floppy->drive = drive;
+	floppy->driver = &idefloppy_driver;
+	floppy->disk = g;
+
+	g->private_data = &floppy->driver;
+
+	drive->driver_data = floppy;
+
+	DRIVER(drive)->busy++;
+	idefloppy_setup (drive, floppy);
+	DRIVER(drive)->busy--;
+	g->minors = 1 << PARTN_BITS;
+	g->driverfs_dev = &drive->gendev;
+	strcpy(g->devfs_name, drive->devfs_name);
+	g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0;
+	g->fops = &idefloppy_ops;
+	drive->attach = 1;
+	add_disk(g);
+	return 0;
+
+out_put_disk:
+	put_disk(g);
+out_free_floppy:
+	kfree(floppy);
+failed:
+	return 1;
+}
+
+MODULE_DESCRIPTION("ATAPI FLOPPY Driver");
+
+static void __exit idefloppy_exit (void)
+{
+	ide_unregister_driver(&idefloppy_driver);
+}
+
+/*
+ *	idefloppy_init will register the driver for each floppy.
+ */
+static int idefloppy_init (void)
+{
+	printk("ide-floppy driver " IDEFLOPPY_VERSION "\n");
+	ide_register_driver(&idefloppy_driver);
+	return 0;
+}
+
+module_init(idefloppy_init);
+module_exit(idefloppy_exit);
+MODULE_LICENSE("GPL");