summaryrefslogtreecommitdiffstats
path: root/drivers/ide/dtc2278.c
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
commit2bfba3c444fe8b2ab1c38112a89d8f03b61136ca (patch)
tree17580eee63d868c9d6b97a6bc956a08f25631532 /drivers/ide/dtc2278.c
parent2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4 (diff)
downloadop-kernel-dev-2bfba3c444fe8b2ab1c38112a89d8f03b61136ca.zip
op-kernel-dev-2bfba3c444fe8b2ab1c38112a89d8f03b61136ca.tar.gz
ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/dtc2278.c')
-rw-r--r--drivers/ide/dtc2278.c153
1 files changed, 153 insertions, 0 deletions
diff --git a/drivers/ide/dtc2278.c b/drivers/ide/dtc2278.c
new file mode 100644
index 0000000..689b2e4
--- /dev/null
+++ b/drivers/ide/dtc2278.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 1996 Linus Torvalds & author (see below)
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#define DRV_NAME "dtc2278"
+
+/*
+ * Changing this #undef to #define may solve start up problems in some systems.
+ */
+#undef ALWAYS_SET_DTC2278_PIO_MODE
+
+/*
+ * From: andy@cercle.cts.com (Dyan Wile)
+ *
+ * Below is a patch for DTC-2278 - alike software-programmable controllers
+ * The code enables the secondary IDE controller and the PIO4 (3?) timings on
+ * the primary (EIDE). You may probably have to enable the 32-bit support to
+ * get the full speed. You better get the disk interrupts disabled ( hdparm -u0
+ * /dev/hd.. ) for the drives connected to the EIDE interface. (I get my
+ * filesystem corrupted with -u1, but under heavy disk load only :-)
+ *
+ * This card is now forced to use the "serialize" feature,
+ * and irq-unmasking is disallowed. If io_32bit is enabled,
+ * it must be done for BOTH drives on each interface.
+ *
+ * This code was written for the DTC2278E, but might work with any of these:
+ *
+ * DTC2278S has only a single IDE interface.
+ * DTC2278D has two IDE interfaces and is otherwise identical to the S version.
+ * DTC2278E also has serial ports and a printer port
+ * DTC2278EB: has onboard BIOS, and "works like a charm" -- Kent Bradford <kent@theory.caltech.edu>
+ *
+ * There may be a fourth controller type. The S and D versions use the
+ * Winbond chip, and I think the E version does also.
+ *
+ */
+
+static void sub22 (char b, char c)
+{
+ int i;
+
+ for(i = 0; i < 3; ++i) {
+ inb(0x3f6);
+ outb_p(b,0xb0);
+ inb(0x3f6);
+ outb_p(c,0xb4);
+ inb(0x3f6);
+ if(inb(0xb4) == c) {
+ outb_p(7,0xb0);
+ inb(0x3f6);
+ return; /* success */
+ }
+ }
+}
+
+static DEFINE_SPINLOCK(dtc2278_lock);
+
+static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+ unsigned long flags;
+
+ if (pio >= 3) {
+ spin_lock_irqsave(&dtc2278_lock, flags);
+ /*
+ * This enables PIO mode4 (3?) on the first interface
+ */
+ sub22(1,0xc3);
+ sub22(0,0xa0);
+ spin_unlock_irqrestore(&dtc2278_lock, flags);
+ } else {
+ /* we don't know how to set it back again.. */
+ /* Actually we do - there is a data sheet available for the
+ Winbond but does anyone actually care */
+ }
+}
+
+static const struct ide_port_ops dtc2278_port_ops = {
+ .set_pio_mode = dtc2278_set_pio_mode,
+};
+
+static const struct ide_port_info dtc2278_port_info __initdata = {
+ .name = DRV_NAME,
+ .chipset = ide_dtc2278,
+ .port_ops = &dtc2278_port_ops,
+ .host_flags = IDE_HFLAG_SERIALIZE |
+ IDE_HFLAG_NO_UNMASK_IRQS |
+ IDE_HFLAG_IO_32BIT |
+ /* disallow ->io_32bit changes */
+ IDE_HFLAG_NO_IO_32BIT |
+ IDE_HFLAG_NO_DMA,
+ .pio_mask = ATA_PIO4,
+};
+
+static int __init dtc2278_probe(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ /*
+ * This enables the second interface
+ */
+ outb_p(4,0xb0);
+ inb(0x3f6);
+ outb_p(0x20,0xb4);
+ inb(0x3f6);
+#ifdef ALWAYS_SET_DTC2278_PIO_MODE
+ /*
+ * This enables PIO mode4 (3?) on the first interface
+ * and may solve start-up problems for some people.
+ */
+ sub22(1,0xc3);
+ sub22(0,0xa0);
+#endif
+ local_irq_restore(flags);
+
+ return ide_legacy_device_add(&dtc2278_port_info, 0);
+}
+
+static int probe_dtc2278;
+
+module_param_named(probe, probe_dtc2278, bool, 0);
+MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets");
+
+static int __init dtc2278_init(void)
+{
+ if (probe_dtc2278 == 0)
+ return -ENODEV;
+
+ if (dtc2278_probe()) {
+ printk(KERN_ERR "dtc2278: ide interfaces already in use!\n");
+ return -EBUSY;
+ }
+ return 0;
+}
+
+module_init(dtc2278_init);
+
+MODULE_AUTHOR("See Local File");
+MODULE_DESCRIPTION("support of DTC-2278 VLB IDE chipsets");
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud