summaryrefslogtreecommitdiffstats
path: root/drivers/ide/cris
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-02-06 02:57:50 +0100
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-02-06 02:57:50 +0100
commit29dd59755a849cc6475faa6a75f3b804e23a6fc2 (patch)
tree007f73aed935c22438e69cb2d2438b93f249d955 /drivers/ide/cris
parentf2694b7e3bad75436b47b6840de352f7b7f53feb (diff)
downloadop-kernel-dev-29dd59755a849cc6475faa6a75f3b804e23a6fc2.zip
op-kernel-dev-29dd59755a849cc6475faa6a75f3b804e23a6fc2.tar.gz
ide: remove ide_setup_ports()
ide-cris.c: * Add cris_setup_ports() helper and use it instead of ide_setup_ports() (fixes random value being set in ->io_ports[IDE_IRQ_OFFSET]). buddha.c: * Add buddha_setup_ports() helper and use it instead of ide_setup_ports(). falconide.c: * Add falconide_setup_ports() helper and use it instead of ide_setup_ports(), also fix return value of falconide_init() while at it. gayle.c: * Add gayle_setup_ports() helper and use it instead of ide_setup_ports(). macide.c: * Add macide_setup_ports() helper and use it instead of ide_setup_ports() (fixes incorrect value being set in ->io_ports[IDE_IRQ_OFFSET]). q40ide.c: * Fix q40_ide_setup_ports() comments. ide.c: * Remove no longer needed ide_setup_ports(). Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/cris')
-rw-r--r--drivers/ide/cris/ide-cris.c33
1 files changed, 22 insertions, 11 deletions
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 00587a8..e79bf8f 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -753,6 +753,25 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
}
+static void __init cris_setup_ports(hw_regs_t *hw, unsigned long base)
+{
+ int i;
+
+ memset(hw, 0, sizeof(*hw));
+
+ for (i = 0; i <= 7; i++)
+ hw->io_ports[i] = base + cris_ide_reg_addr(i, 0, 1);
+
+ /*
+ * the IDE control register is at ATA address 6,
+ * with CS1 active instead of CS0
+ */
+ hw->io_ports[IDE_CONTROL_OFFSET] = base + cris_ide_reg_addr(6, 1, 0);
+
+ hw->irq = ide_default_irq(0);
+ hw->ack_intr = cris_ide_ack_intr;
+}
+
static const struct ide_port_info cris_port_info __initdata = {
.chipset = ide_etrax100,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
@@ -765,24 +784,16 @@ static const struct ide_port_info cris_port_info __initdata = {
static int __init init_e100_ide(void)
{
hw_regs_t hw;
- int ide_offsets[IDE_NR_PORTS], h, i;
+ int h;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
printk("ide: ETRAX FS built-in ATA DMA controller\n");
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
- ide_offsets[i] = cris_ide_reg_addr(i, 0, 1);
-
- /* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */
- ide_offsets[IDE_CONTROL_OFFSET] = cris_ide_reg_addr(6, 1, 0);
-
for (h = 0; h < 4; h++) {
ide_hwif_t *hwif = NULL;
- ide_setup_ports(&hw, cris_ide_base_address(h),
- ide_offsets,
- 0, 0, cris_ide_ack_intr,
- ide_default_irq(0));
+ cris_setup_ports(&hw, cris_ide_base_address(h));
+
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif == NULL)
continue;
OpenPOWER on IntegriCloud