summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
authorLuotao Fu <l.fu@pengutronix.de>2010-03-01 13:24:24 +0100
committerBen Dooks <ben-linux@fluff.org>2010-03-07 22:10:09 +0000
commitad0194e8d624df67a970a36e8ef9e61514e25553 (patch)
tree0a6ca637423c97d98599d5e17a0f5af4bd03bc39 /drivers/i2c
parent96eb7164e3c2f8c1b53118078e5c06f7c34c2d49 (diff)
downloadop-kernel-dev-ad0194e8d624df67a970a36e8ef9e61514e25553.zip
op-kernel-dev-ad0194e8d624df67a970a36e8ef9e61514e25553.tar.gz
i2c-pnx: fix setting start/stop condition
The start/stop condtions are set in different places repetedly in the i2c-pnx driver. Beside in i2c_pnx_start and i2c_pnx_stop the start/stop bit are also set during the transfer of a i2c message in the master_xmit/rcv calls. This is wrong since we can't set the start/stop condition during the transaction of a single message any way. As a matter of fact, the driver will sometimes set both the start and the stop bits at one time. This can be easily reproduced by sending a simple read request like e.g struct i2c_msg msgs[] = { { addr, 0, 1, buf }, { addr, I2C_M_RD, offset, buf } }; While processing the first message the i2c_pnx_master_xmit will set both the start_bit and the stop_bit, which will eventually confuse the slave. Fixed by remove setting start/stop condition from the transmit routines. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-pnx.c11
1 files changed, 0 insertions, 11 deletions
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 2b0bd0b..9532dee 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -172,12 +172,6 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
/* We still have something to talk about... */
val = *alg_data->mif.buf++;
- if (alg_data->mif.len == 1) {
- val |= stop_bit;
- if (!alg_data->last)
- val |= start_bit;
- }
-
alg_data->mif.len--;
iowrite32(val, I2C_REG_TX(alg_data));
@@ -251,11 +245,6 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
__func__);
if (alg_data->mif.len == 1) {
- /* Last byte, do not acknowledge next rcv. */
- val |= stop_bit;
- if (!alg_data->last)
- val |= start_bit;
-
/*
* Enable interrupt RFDAIE (data in Rx fifo),
* and disable DRMIE (need data for Tx)
OpenPOWER on IntegriCloud