summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
authorVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>2011-05-13 12:30:23 +0200
committerBen Dooks <ben-linux@fluff.org>2011-05-25 00:20:43 +0100
commitebd10e0783d9fb92a147e60902e22c2d3f3ad69d (patch)
treea7e6524ae0618638bbff0b74f3abeac1e2d4817a /drivers/i2c
parentb0e751a925260e5998a76dad41d4565ef26870db (diff)
downloadop-kernel-dev-ebd10e0783d9fb92a147e60902e22c2d3f3ad69d.zip
op-kernel-dev-ebd10e0783d9fb92a147e60902e22c2d3f3ad69d.tar.gz
i2c-nomadik: add code to retry on timeout failure
It is seen that i2c-nomadik controller randomly stops generating the interrupts leading to a i2c timeout. As a workaround to this problem, add retries to the on going transfer on failure. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c97
1 files changed, 49 insertions, 48 deletions
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 234e4a9..b49ff25 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -255,8 +255,6 @@ static int init_hw(struct nmk_i2c_dev *dev)
{
int stat;
- clk_enable(dev->clk);
-
stat = flush_i2c_fifo(dev);
if (stat)
goto exit;
@@ -271,8 +269,6 @@ static int init_hw(struct nmk_i2c_dev *dev)
dev->cli.operation = I2C_NO_OPERATION;
exit:
- /* TODO: Why disable clocks after init hw? */
- clk_disable(dev->clk);
/*
* TODO: What is this delay for?
* Must be pretty pointless since the hw block
@@ -572,6 +568,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
u32 cause;
struct nmk_i2c_dev *dev = i2c_get_adapdata(i2c_adap);
u32 i2c_sr;
+ int j;
dev->busy = true;
@@ -579,63 +576,67 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
regulator_enable(dev->regulator);
pm_runtime_get_sync(&dev->pdev->dev);
+ clk_enable(dev->clk);
+
status = init_hw(dev);
if (status)
- goto out2;
+ goto out;
- clk_enable(dev->clk);
-
- /* setup the i2c controller */
- setup_i2c_controller(dev);
+ for (j = 0; j < 3; j++) {
+ /* setup the i2c controller */
+ setup_i2c_controller(dev);
- for (i = 0; i < num_msgs; i++) {
- if (unlikely(msgs[i].flags & I2C_M_TEN)) {
- dev_err(&dev->pdev->dev, "10 bit addressing"
- "not supported\n");
+ for (i = 0; i < num_msgs; i++) {
+ if (unlikely(msgs[i].flags & I2C_M_TEN)) {
+ dev_err(&dev->pdev->dev, "10 bit addressing"
+ "not supported\n");
- status = -EINVAL;
- goto out;
- }
- dev->cli.slave_adr = msgs[i].addr;
- dev->cli.buffer = msgs[i].buf;
- dev->cli.count = msgs[i].len;
- dev->stop = (i < (num_msgs - 1)) ? 0 : 1;
- dev->result = 0;
-
- if (msgs[i].flags & I2C_M_RD) {
- /* it is a read operation */
- dev->cli.operation = I2C_READ;
- status = read_i2c(dev);
- } else {
- /* write operation */
- dev->cli.operation = I2C_WRITE;
- status = write_i2c(dev);
- }
- if (status || (dev->result)) {
- i2c_sr = readl(dev->virtbase + I2C_SR);
- /*
- * Check if the controller I2C operation status is set
- * to ABORT(11b).
- */
- if (((i2c_sr >> 2) & 0x3) == 0x3) {
- /* get the abort cause */
- cause = (i2c_sr >> 4)
- & 0x7;
- dev_err(&dev->pdev->dev, "%s\n", cause >=
- ARRAY_SIZE(abort_causes) ?
+ status = -EINVAL;
+ goto out;
+ }
+ dev->cli.slave_adr = msgs[i].addr;
+ dev->cli.buffer = msgs[i].buf;
+ dev->cli.count = msgs[i].len;
+ dev->stop = (i < (num_msgs - 1)) ? 0 : 1;
+ dev->result = 0;
+
+ if (msgs[i].flags & I2C_M_RD) {
+ /* it is a read operation */
+ dev->cli.operation = I2C_READ;
+ status = read_i2c(dev);
+ } else {
+ /* write operation */
+ dev->cli.operation = I2C_WRITE;
+ status = write_i2c(dev);
+ }
+ if (status || (dev->result)) {
+ i2c_sr = readl(dev->virtbase + I2C_SR);
+ /*
+ * Check if the controller I2C operation status
+ * is set to ABORT(11b).
+ */
+ if (((i2c_sr >> 2) & 0x3) == 0x3) {
+ /* get the abort cause */
+ cause = (i2c_sr >> 4)
+ & 0x7;
+ dev_err(&dev->pdev->dev, "%s\n", cause
+ >= ARRAY_SIZE(abort_causes) ?
"unknown reason" :
abort_causes[cause]);
- }
+ }
- status = status ? status : dev->result;
- goto out;
+ status = status ? status : dev->result;
+
+ break;
+ }
+ udelay(I2C_DELAY);
}
- udelay(I2C_DELAY);
+ if (status == 0)
+ break;
}
out:
clk_disable(dev->clk);
-out2:
pm_runtime_put_sync(&dev->pdev->dev);
if (dev->regulator)
regulator_disable(dev->regulator);
OpenPOWER on IntegriCloud