summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
authorManuel Lauss <mano@roarinelk.homelinux.net>2008-01-27 18:14:52 +0100
committerJean Delvare <khali@hyperion.delvare>2008-01-27 18:14:52 +0100
commit8b798c4d16b762d15f4055597ff8d87f73b35552 (patch)
tree5e25f828d4eb3930a724c2f04f40bb6a8addff01 /drivers/i2c
parent91f27958d686da713c3b0a1dc205288898e44124 (diff)
downloadop-kernel-dev-8b798c4d16b762d15f4055597ff8d87f73b35552.zip
op-kernel-dev-8b798c4d16b762d15f4055597ff8d87f73b35552.tar.gz
i2c-au1550: Convert to platform driver
Convert the i2c-au1550 bus driver to platform driver, and register a platform device for the Alchemy Db/Pb series of boards. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-au1550.c166
-rw-r--r--drivers/i2c/busses/i2c-au1550.h32
2 files changed, 102 insertions, 96 deletions
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 7d51a43..1953b26 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -30,14 +30,22 @@
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-#include "i2c-au1550.h"
+struct i2c_au1550_data {
+ u32 psc_base;
+ int xfer_timeout;
+ int ack_timeout;
+ struct i2c_adapter adap;
+ struct resource *ioarea;
+};
static int
wait_xfer_done(struct i2c_au1550_data *adap)
@@ -299,18 +307,48 @@ static const struct i2c_algorithm au1550_algo = {
* Prior to calling us, the 50MHz clock frequency and routing
* must have been set up for the PSC indicated by the adapter.
*/
-int
-i2c_au1550_add_bus(struct i2c_adapter *i2c_adap)
+static int __devinit
+i2c_au1550_probe(struct platform_device *pdev)
{
- struct i2c_au1550_data *adap = i2c_adap->algo_data;
- volatile psc_smb_t *sp;
- u32 stat;
+ struct i2c_au1550_data *priv;
+ volatile psc_smb_t *sp;
+ struct resource *r;
+ u32 stat;
+ int ret;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ ret = -ENODEV;
+ goto out;
+ }
- i2c_adap->algo = &au1550_algo;
+ priv = kzalloc(sizeof(struct i2c_au1550_data), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ priv->ioarea = request_mem_region(r->start, r->end - r->start + 1,
+ pdev->name);
+ if (!priv->ioarea) {
+ ret = -EBUSY;
+ goto out_mem;
+ }
+
+ priv->psc_base = r->start;
+ priv->xfer_timeout = 200;
+ priv->ack_timeout = 200;
+
+ priv->adap.id = I2C_HW_AU1550_PSC;
+ priv->adap.nr = pdev->id;
+ priv->adap.algo = &au1550_algo;
+ priv->adap.algo_data = priv;
+ priv->adap.dev.parent = &pdev->dev;
+ strlcpy(priv->adap.name, "Au1xxx PSC I2C", sizeof(priv->adap.name));
/* Now, set up the PSC for SMBus PIO mode.
*/
- sp = (volatile psc_smb_t *)(adap->psc_base);
+ sp = (volatile psc_smb_t *)priv->psc_base;
sp->psc_ctrl = PSC_CTRL_DISABLE;
au_sync();
sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
@@ -348,87 +386,87 @@ i2c_au1550_add_bus(struct i2c_adapter *i2c_adap)
au_sync();
} while ((stat & PSC_SMBSTAT_DR) == 0);
- return i2c_add_adapter(i2c_adap);
-}
+ ret = i2c_add_numbered_adapter(&priv->adap);
+ if (ret == 0) {
+ platform_set_drvdata(pdev, priv);
+ return 0;
+ }
+
+ /* disable the PSC */
+ sp->psc_smbcfg = 0;
+ sp->psc_ctrl = PSC_CTRL_DISABLE;
+ au_sync();
+ release_resource(priv->ioarea);
+ kfree(priv->ioarea);
+out_mem:
+ kfree(priv);
+out:
+ return ret;
+}
-int
-i2c_au1550_del_bus(struct i2c_adapter *adap)
+static int __devexit
+i2c_au1550_remove(struct platform_device *pdev)
{
- return i2c_del_adapter(adap);
+ struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
+ volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
+
+ platform_set_drvdata(pdev, NULL);
+ i2c_del_adapter(&priv->adap);
+ sp->psc_smbcfg = 0;
+ sp->psc_ctrl = PSC_CTRL_DISABLE;
+ au_sync();
+ release_resource(priv->ioarea);
+ kfree(priv->ioarea);
+ kfree(priv);
+ return 0;
}
static int
-pb1550_reg(struct i2c_client *client)
+i2c_au1550_suspend(struct platform_device *pdev, pm_message_t state)
{
+ struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
+ volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
+
+ sp->psc_ctrl = PSC_CTRL_SUSPEND;
+ au_sync();
return 0;
}
static int
-pb1550_unreg(struct i2c_client *client)
+i2c_au1550_resume(struct platform_device *pdev)
{
+ struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
+ volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
+
+ sp->psc_ctrl = PSC_CTRL_ENABLE;
+ au_sync();
+ while (!(sp->psc_smbstat & PSC_SMBSTAT_SR))
+ au_sync();
return 0;
}
-static struct i2c_au1550_data pb1550_i2c_info = {
- SMBUS_PSC_BASE, 200, 200
-};
-
-static struct i2c_adapter pb1550_board_adapter = {
- name: "pb1550 adapter",
- id: I2C_HW_AU1550_PSC,
- algo: NULL,
- algo_data: &pb1550_i2c_info,
- client_register: pb1550_reg,
- client_unregister: pb1550_unreg,
+static struct platform_driver au1xpsc_smbus_driver = {
+ .driver = {
+ .name = "au1xpsc_smbus",
+ .owner = THIS_MODULE,
+ },
+ .probe = i2c_au1550_probe,
+ .remove = __devexit_p(i2c_au1550_remove),
+ .suspend = i2c_au1550_suspend,
+ .resume = i2c_au1550_resume,
};
-/* BIG hack to support the control interface on the Wolfson WM8731
- * audio codec on the Pb1550 board. We get an address and two data
- * bytes to write, create an i2c message, and send it across the
- * i2c transfer function. We do this here because we have access to
- * the i2c adapter structure.
- */
-static struct i2c_msg wm_i2c_msg; /* We don't want this stuff on the stack */
-static u8 i2cbuf[2];
-
-int
-pb1550_wm_codec_write(u8 addr, u8 reg, u8 val)
-{
- wm_i2c_msg.addr = addr;
- wm_i2c_msg.flags = 0;
- wm_i2c_msg.buf = i2cbuf;
- wm_i2c_msg.len = 2;
- i2cbuf[0] = reg;
- i2cbuf[1] = val;
-
- return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, &wm_i2c_msg, 1);
-}
-
static int __init
i2c_au1550_init(void)
{
- printk(KERN_INFO "Au1550 I2C: ");
-
- /* This is where we would set up a 50MHz clock source
- * and routing. On the Pb1550, the SMBus is PSC2, which
- * uses a shared clock with USB. This has been already
- * configured by Yamon as a 48MHz clock, close enough
- * for our work.
- */
- if (i2c_au1550_add_bus(&pb1550_board_adapter) < 0) {
- printk("failed to initialize.\n");
- return -ENODEV;
- }
-
- printk("initialized.\n");
- return 0;
+ return platform_driver_register(&au1xpsc_smbus_driver);
}
static void __exit
i2c_au1550_exit(void)
{
- i2c_au1550_del_bus(&pb1550_board_adapter);
+ platform_driver_unregister(&au1xpsc_smbus_driver);
}
MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC.");
diff --git a/drivers/i2c/busses/i2c-au1550.h b/drivers/i2c/busses/i2c-au1550.h
deleted file mode 100644
index fce15d1..0000000
--- a/drivers/i2c/busses/i2c-au1550.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
- * 2.6 port by Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef I2C_AU1550_H
-#define I2C_AU1550_H
-
-struct i2c_au1550_data {
- u32 psc_base;
- int xfer_timeout;
- int ack_timeout;
-};
-
-int i2c_au1550_add_bus(struct i2c_adapter *);
-int i2c_au1550_del_bus(struct i2c_adapter *);
-
-#endif /* I2C_AU1550_H */
OpenPOWER on IntegriCloud