Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:
	arch/sh/include/asm/Kbuild
	drivers/Makefile

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

17 files changed, 1804 insertions, 207 deletions

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index d06083f..30f06e9 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -47,6 +47,19 @@ config I2C_CHARDEV
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-dev.
 
+config I2C_MUX
+	tristate "I2C bus multiplexing support"
+	depends on EXPERIMENTAL
+	help
+	  Say Y here if you want the I2C core to support the ability to
+	  handle multiplexed I2C bus topologies, by presenting each
+	  multiplexed segment as a I2C adapter.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-mux.
+
+source drivers/i2c/muxes/Kconfig
+
 config I2C_HELPER_AUTO
 	bool "Autoselect pertinent helper modules"
 	default y
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index a7d9b4be9..c00fd66 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -6,7 +6,8 @@ obj-$(CONFIG_I2C_BOARDINFO)	+= i2c-boardinfo.o
 obj-$(CONFIG_I2C)		+= i2c-core.o
 obj-$(CONFIG_I2C_SMBUS)		+= i2c-smbus.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
-obj-y				+= algos/ busses/
+obj-$(CONFIG_I2C_MUX)		+= i2c-mux.o
+obj-y				+= algos/ busses/ muxes/
 
 ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index bceafbf..6539ac2 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -448,6 +448,13 @@ config I2C_NOMADIK
 	  If you say yes to this option, support will be included for the
 	  I2C interface from ST-Ericsson's Nomadik and Ux500 architectures.
 
+config I2C_NUC900
+	tristate "NUC900 I2C Driver"
+	depends on ARCH_W90X900
+	help
+	  Say Y here to include support for I2C controller in the
+	  Winbond/Nuvoton NUC900 based System-on-Chip devices.
+
 config I2C_OCORES
 	tristate "OpenCores I2C Controller"
 	depends on EXPERIMENTAL
@@ -496,8 +503,8 @@ config I2C_PMCMSP
 	  will be called i2c-pmcmsp.
 
 config I2C_PNX
-	tristate "I2C bus support for Philips PNX targets"
-	depends on ARCH_PNX4008
+	tristate "I2C bus support for Philips PNX and NXP LPC targets"
+	depends on ARCH_PNX4008 || ARCH_LPC32XX
 	help
 	  This driver supports the Philips IP3204 I2C IP block master and/or
 	  slave controller
@@ -521,12 +528,19 @@ config I2C_PXA_SLAVE
 	  is necessary for systems where the PXA may be a target on the
 	  I2C bus.
 
+config HAVE_S3C2410_I2C
+	bool
+	help
+	  This will include I2C support for Samsung SoCs. If you want to
+	  include I2C support for any machine, kindly select this in the
+	  respective Kconfig file.
+
 config I2C_S3C2410
 	tristate "S3C2410 I2C Driver"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	depends on HAVE_S3C2410_I2C
 	help
 	  Say Y here to include support for I2C controller in the
-	  Samsung S3C2410 based System-on-Chip devices.
+	  Samsung SoCs.
 
 config I2C_S6000
 	tristate "S6000 I2C support"
@@ -549,7 +563,7 @@ config I2C_SH7760
 
 config I2C_SH_MOBILE
 	tristate "SuperH Mobile I2C Controller"
-	depends on SUPERH
+	depends on SUPERH || ARCH_SHMOBILE
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Renesas SH-Mobile processor.
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 936880b..c3ef492 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_I2C_IXP2000)	+= i2c-ixp2000.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_NOMADIK)	+= i2c-nomadik.o
+obj-$(CONFIG_I2C_NUC900)	+= i2c-nuc900.o
 obj-$(CONFIG_I2C_OCORES)	+= i2c-ocores.o
 obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
 obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index b02b453..f7bd261 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -105,7 +105,7 @@ struct i2c_reg {
 
 struct cpm_i2c {
 	char *base;
-	struct of_device *ofdev;
+	struct platform_device *ofdev;
 	struct i2c_adapter adap;
 	uint dp_addr;
 	int version; /* CPM1=1, CPM2=2 */
@@ -428,7 +428,7 @@ static const struct i2c_adapter cpm_ops = {
 
 static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
 {
-	struct of_device *ofdev = cpm->ofdev;
+	struct platform_device *ofdev = cpm->ofdev;
 	const u32 *data;
 	int len, ret, i;
 	void __iomem *i2c_base;
@@ -634,7 +634,7 @@ static void cpm_i2c_shutdown(struct cpm_i2c *cpm)
 		cpm_muram_free(cpm->i2c_addr);
 }
 
-static int __devinit cpm_i2c_probe(struct of_device *ofdev,
+static int __devinit cpm_i2c_probe(struct platform_device *ofdev,
 			 const struct of_device_id *match)
 {
 	int result, len;
@@ -652,6 +652,7 @@ static int __devinit cpm_i2c_probe(struct of_device *ofdev,
 	cpm->adap = cpm_ops;
 	i2c_set_adapdata(&cpm->adap, cpm);
 	cpm->adap.dev.parent = &ofdev->dev;
+	cpm->adap.dev.of_node = of_node_get(ofdev->dev.of_node);
 
 	result = cpm_i2c_setup(cpm);
 	if (result) {
@@ -676,11 +677,6 @@ static int __devinit cpm_i2c_probe(struct of_device *ofdev,
 	dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
 		cpm->adap.name);
 
-	/*
-	 * register OF I2C devices
-	 */
-	of_register_i2c_devices(&cpm->adap, ofdev->dev.of_node);
-
 	return 0;
 out_shut:
 	cpm_i2c_shutdown(cpm);
@@ -691,7 +687,7 @@ out_free:
 	return result;
 }
 
-static int __devexit cpm_i2c_remove(struct of_device *ofdev)
+static int __devexit cpm_i2c_remove(struct platform_device *ofdev)
 {
 	struct cpm_i2c *cpm = dev_get_drvdata(&ofdev->dev);
 
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 4523364..2222c87 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -36,14 +36,16 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/cpufreq.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
-
 #include <mach/i2c.h>
 
 /* ----- global defines ----------------------------------------------- */
 
 #define DAVINCI_I2C_TIMEOUT	(1*HZ)
+#define DAVINCI_I2C_MAX_TRIES	2
 #define I2C_DAVINCI_INTR_ALL    (DAVINCI_I2C_IMR_AAS | \
 				 DAVINCI_I2C_IMR_SCD | \
 				 DAVINCI_I2C_IMR_ARDY | \
@@ -72,37 +74,29 @@
 #define DAVINCI_I2C_IVR_NACK	0x02
 #define DAVINCI_I2C_IVR_AL	0x01
 
-#define DAVINCI_I2C_STR_BB	(1 << 12)
-#define DAVINCI_I2C_STR_RSFULL	(1 << 11)
-#define DAVINCI_I2C_STR_SCD	(1 << 5)
-#define DAVINCI_I2C_STR_ARDY	(1 << 2)
-#define DAVINCI_I2C_STR_NACK	(1 << 1)
-#define DAVINCI_I2C_STR_AL	(1 << 0)
-
-#define DAVINCI_I2C_MDR_NACK	(1 << 15)
-#define DAVINCI_I2C_MDR_STT	(1 << 13)
-#define DAVINCI_I2C_MDR_STP	(1 << 11)
-#define DAVINCI_I2C_MDR_MST	(1 << 10)
-#define DAVINCI_I2C_MDR_TRX	(1 << 9)
-#define DAVINCI_I2C_MDR_XA	(1 << 8)
-#define DAVINCI_I2C_MDR_RM	(1 << 7)
-#define DAVINCI_I2C_MDR_IRS	(1 << 5)
-
-#define DAVINCI_I2C_IMR_AAS	(1 << 6)
-#define DAVINCI_I2C_IMR_SCD	(1 << 5)
-#define DAVINCI_I2C_IMR_XRDY	(1 << 4)
-#define DAVINCI_I2C_IMR_RRDY	(1 << 3)
-#define DAVINCI_I2C_IMR_ARDY	(1 << 2)
-#define DAVINCI_I2C_IMR_NACK	(1 << 1)
-#define DAVINCI_I2C_IMR_AL	(1 << 0)
-
-#define MOD_REG_BIT(val, mask, set) do { \
-	if (set) { \
-		val |= mask; \
-	} else { \
-		val &= ~mask; \
-	} \
-} while (0)
+#define DAVINCI_I2C_STR_BB	BIT(12)
+#define DAVINCI_I2C_STR_RSFULL	BIT(11)
+#define DAVINCI_I2C_STR_SCD	BIT(5)
+#define DAVINCI_I2C_STR_ARDY	BIT(2)
+#define DAVINCI_I2C_STR_NACK	BIT(1)
+#define DAVINCI_I2C_STR_AL	BIT(0)
+
+#define DAVINCI_I2C_MDR_NACK	BIT(15)
+#define DAVINCI_I2C_MDR_STT	BIT(13)
+#define DAVINCI_I2C_MDR_STP	BIT(11)
+#define DAVINCI_I2C_MDR_MST	BIT(10)
+#define DAVINCI_I2C_MDR_TRX	BIT(9)
+#define DAVINCI_I2C_MDR_XA	BIT(8)
+#define DAVINCI_I2C_MDR_RM	BIT(7)
+#define DAVINCI_I2C_MDR_IRS	BIT(5)
+
+#define DAVINCI_I2C_IMR_AAS	BIT(6)
+#define DAVINCI_I2C_IMR_SCD	BIT(5)
+#define DAVINCI_I2C_IMR_XRDY	BIT(4)
+#define DAVINCI_I2C_IMR_RRDY	BIT(3)
+#define DAVINCI_I2C_IMR_ARDY	BIT(2)
+#define DAVINCI_I2C_IMR_NACK	BIT(1)
+#define DAVINCI_I2C_IMR_AL	BIT(0)
 
 struct davinci_i2c_dev {
 	struct device           *dev;
@@ -113,8 +107,13 @@ struct davinci_i2c_dev {
 	u8			*buf;
 	size_t			buf_len;
 	int			irq;
+	int			stop;
 	u8			terminate;
 	struct i2c_adapter	adapter;
+#ifdef CONFIG_CPU_FREQ
+	struct completion	xfr_complete;
+	struct notifier_block	freq_transition;
+#endif
 };
 
 /* default platform data to use if not supplied in the platform_device */
@@ -134,12 +133,59 @@ static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
 	return __raw_readw(i2c_dev->base + reg);
 }
 
-/*
- * This functions configures I2C and brings I2C out of reset.
- * This function is called during I2C init function. This function
- * also gets called if I2C encounters any errors.
+/* Generate a pulse on the i2c clock pin. */
+static void generic_i2c_clock_pulse(unsigned int scl_pin)
+{
+	u16 i;
+
+	if (scl_pin) {
+		/* Send high and low on the SCL line */
+		for (i = 0; i < 9; i++) {
+			gpio_set_value(scl_pin, 0);
+			udelay(20);
+			gpio_set_value(scl_pin, 1);
+			udelay(20);
+		}
+	}
+}
+
+/* This routine does i2c bus recovery as specified in the
+ * i2c protocol Rev. 03 section 3.16 titled "Bus clear"
  */
-static int i2c_davinci_init(struct davinci_i2c_dev *dev)
+static void i2c_recover_bus(struct davinci_i2c_dev *dev)
+{
+	u32 flag = 0;
+	struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
+
+	dev_err(dev->dev, "initiating i2c bus recovery\n");
+	/* Send NACK to the slave */
+	flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+	flag |=  DAVINCI_I2C_MDR_NACK;
+	/* write the data into mode register */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+	if (pdata)
+		generic_i2c_clock_pulse(pdata->scl_pin);
+	/* Send STOP */
+	flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+	flag |= DAVINCI_I2C_MDR_STP;
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+}
+
+static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev,
+								int val)
+{
+	u16 w;
+
+	w = davinci_i2c_read_reg(i2c_dev, DAVINCI_I2C_MDR_REG);
+	if (!val)	/* put I2C into reset */
+		w &= ~DAVINCI_I2C_MDR_IRS;
+	else		/* take I2C out of reset */
+		w |= DAVINCI_I2C_MDR_IRS;
+
+	davinci_i2c_write_reg(i2c_dev, DAVINCI_I2C_MDR_REG, w);
+}
+
+static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
 {
 	struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
 	u16 psc;
@@ -148,15 +194,6 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
 	u32 clkh;
 	u32 clkl;
 	u32 input_clock = clk_get_rate(dev->clk);
-	u16 w;
-
-	if (!pdata)
-		pdata = &davinci_i2c_platform_data_default;
-
-	/* put I2C into reset */
-	w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
-	MOD_REG_BIT(w, DAVINCI_I2C_MDR_IRS, 0);
-	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
 
 	/* NOTE: I2C Clock divider programming info
 	 * As per I2C specs the following formulas provide prescaler
@@ -188,12 +225,32 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
 
+	dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
+}
+
+/*
+ * This function configures I2C and brings I2C out of reset.
+ * This function is called during I2C init function. This function
+ * also gets called if I2C encounters any errors.
+ */
+static int i2c_davinci_init(struct davinci_i2c_dev *dev)
+{
+	struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
+
+	if (!pdata)
+		pdata = &davinci_i2c_platform_data_default;
+
+	/* put I2C into reset */
+	davinci_i2c_reset_ctrl(dev, 0);
+
+	/* compute clock dividers */
+	i2c_davinci_calc_clk_dividers(dev);
+
 	/* Respond at reserved "SMBus Host" slave address" (and zero);
 	 * we seem to have no option to not respond...
 	 */
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, 0x08);
 
-	dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
 	dev_dbg(dev->dev, "PSC  = %d\n",
 		davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
 	dev_dbg(dev->dev, "CLKL = %d\n",
@@ -204,9 +261,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
 		pdata->bus_freq, pdata->bus_delay);
 
 	/* Take the I2C module out of reset: */
-	w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
-	MOD_REG_BIT(w, DAVINCI_I2C_MDR_IRS, 1);
-	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
+	davinci_i2c_reset_ctrl(dev, 1);
 
 	/* Enable interrupts */
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, I2C_DAVINCI_INTR_ALL);
@@ -221,14 +276,22 @@ static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev,
 					 char allow_sleep)
 {
 	unsigned long timeout;
+	static u16 to_cnt;
 
 	timeout = jiffies + dev->adapter.timeout;
 	while (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG)
 	       & DAVINCI_I2C_STR_BB) {
-		if (time_after(jiffies, timeout)) {
-			dev_warn(dev->dev,
-				 "timeout waiting for bus ready\n");
-			return -ETIMEDOUT;
+		if (to_cnt <= DAVINCI_I2C_MAX_TRIES) {
+			if (time_after(jiffies, timeout)) {
+				dev_warn(dev->dev,
+				"timeout waiting for bus ready\n");
+				to_cnt++;
+				return -ETIMEDOUT;
+			} else {
+				to_cnt = 0;
+				i2c_recover_bus(dev);
+				i2c_davinci_init(dev);
+			}
 		}
 		if (allow_sleep)
 			schedule_timeout(1);
@@ -250,9 +313,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 	u16 w;
 	int r;
 
-	if (msg->len == 0)
-		return -EINVAL;
-
 	if (!pdata)
 		pdata = &davinci_i2c_platform_data_default;
 	/* Introduce a delay, required for some boards (e.g Davinci EVM) */
@@ -264,6 +324,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 
 	dev->buf = msg->buf;
 	dev->buf_len = msg->len;
+	dev->stop = stop;
 
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len);
 
@@ -281,23 +342,40 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 		flag |= DAVINCI_I2C_MDR_TRX;
 	if (stop)
 		flag |= DAVINCI_I2C_MDR_STP;
+	if (msg->len == 0) {
+		flag |= DAVINCI_I2C_MDR_RM;
+		flag &= ~DAVINCI_I2C_MDR_STP;
+	}
 
 	/* Enable receive or transmit interrupts */
 	w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
 	if (msg->flags & I2C_M_RD)
-		MOD_REG_BIT(w, DAVINCI_I2C_IMR_RRDY, 1);
+		w |= DAVINCI_I2C_IMR_RRDY;
 	else
-		MOD_REG_BIT(w, DAVINCI_I2C_IMR_XRDY, 1);
+		w |= DAVINCI_I2C_IMR_XRDY;
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w);
 
 	dev->terminate = 0;
+
 	/* write the data into mode register */
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
 
+	/*
+	 * First byte should be set here, not after interrupt,
+	 * because transmit-data-ready interrupt can come before
+	 * NACK-interrupt during sending of previous message and
+	 * ICDXR may have wrong data
+	 */
+	if ((!(msg->flags & I2C_M_RD)) && dev->buf_len) {
+		davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, *dev->buf++);
+		dev->buf_len--;
+	}
+
 	r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
 						      dev->adapter.timeout);
 	if (r == 0) {
 		dev_err(dev->dev, "controller timed out\n");
+		i2c_recover_bus(dev);
 		i2c_davinci_init(dev);
 		dev->buf_len = 0;
 		return -ETIMEDOUT;
@@ -334,7 +412,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 			return msg->len;
 		if (stop) {
 			w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
-			MOD_REG_BIT(w, DAVINCI_I2C_MDR_STP, 1);
+			w |= DAVINCI_I2C_MDR_STP;
 			davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
 		}
 		return -EREMOTEIO;
@@ -367,12 +445,17 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 		if (ret < 0)
 			return ret;
 	}
+
+#ifdef CONFIG_CPU_FREQ
+	complete(&dev->xfr_complete);
+#endif
+
 	return num;
 }
 
 static u32 i2c_davinci_func(struct i2c_adapter *adap)
 {
-	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 }
 
 static void terminate_read(struct davinci_i2c_dev *dev)
@@ -431,6 +514,14 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
 		case DAVINCI_I2C_IVR_ARDY:
 			davinci_i2c_write_reg(dev,
 				DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY);
+			if (((dev->buf_len == 0) && (dev->stop != 0)) ||
+			    (dev->cmd_err & DAVINCI_I2C_STR_NACK)) {
+				w = davinci_i2c_read_reg(dev,
+							 DAVINCI_I2C_MDR_REG);
+				w |= DAVINCI_I2C_MDR_STP;
+				davinci_i2c_write_reg(dev,
+						      DAVINCI_I2C_MDR_REG, w);
+			}
 			complete(&dev->cmd_complete);
 			break;
 
@@ -462,7 +553,7 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
 
 				w = davinci_i2c_read_reg(dev,
 							 DAVINCI_I2C_IMR_REG);
-				MOD_REG_BIT(w, DAVINCI_I2C_IMR_XRDY, 0);
+				w &= ~DAVINCI_I2C_IMR_XRDY;
 				davinci_i2c_write_reg(dev,
 						      DAVINCI_I2C_IMR_REG,
 						      w);
@@ -491,6 +582,48 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
 	return count ? IRQ_HANDLED : IRQ_NONE;
 }
 
+#ifdef CONFIG_CPU_FREQ
+static int i2c_davinci_cpufreq_transition(struct notifier_block *nb,
+				     unsigned long val, void *data)
+{
+	struct davinci_i2c_dev *dev;
+
+	dev = container_of(nb, struct davinci_i2c_dev, freq_transition);
+	if (val == CPUFREQ_PRECHANGE) {
+		wait_for_completion(&dev->xfr_complete);
+		davinci_i2c_reset_ctrl(dev, 0);
+	} else if (val == CPUFREQ_POSTCHANGE) {
+		i2c_davinci_calc_clk_dividers(dev);
+		davinci_i2c_reset_ctrl(dev, 1);
+	}
+
+	return 0;
+}
+
+static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev)
+{
+	dev->freq_transition.notifier_call = i2c_davinci_cpufreq_transition;
+
+	return cpufreq_register_notifier(&dev->freq_transition,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
+{
+	cpufreq_unregister_notifier(&dev->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+#else
+static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev)
+{
+	return 0;
+}
+
+static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
+{
+}
+#endif
+
 static struct i2c_algorithm i2c_davinci_algo = {
 	.master_xfer	= i2c_davinci_xfer,
 	.functionality	= i2c_davinci_func,
@@ -530,6 +663,9 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	}
 
 	init_completion(&dev->cmd_complete);
+#ifdef CONFIG_CPU_FREQ
+	init_completion(&dev->xfr_complete);
+#endif
 	dev->dev = get_device(&pdev->dev);
 	dev->irq = irq->start;
 	platform_set_drvdata(pdev, dev);
@@ -541,7 +677,12 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	}
 	clk_enable(dev->clk);
 
-	dev->base = (void __iomem *)IO_ADDRESS(mem->start);
+	dev->base = ioremap(mem->start, resource_size(mem));
+	if (!dev->base) {
+		r = -EBUSY;
+		goto err_mem_ioremap;
+	}
+
 	i2c_davinci_init(dev);
 
 	r = request_irq(dev->irq, i2c_davinci_isr, 0, pdev->name, dev);
@@ -550,6 +691,12 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 		goto err_unuse_clocks;
 	}
 
+	r = i2c_davinci_cpufreq_register(dev);
+	if (r) {
+		dev_err(&pdev->dev, "failed to register cpufreq\n");
+		goto err_free_irq;
+	}
+
 	adap = &dev->adapter;
 	i2c_set_adapdata(adap, dev);
 	adap->owner = THIS_MODULE;
@@ -571,6 +718,8 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 err_free_irq:
 	free_irq(dev->irq, dev);
 err_unuse_clocks:
+	iounmap(dev->base);
+err_mem_ioremap:
 	clk_disable(dev->clk);
 	clk_put(dev->clk);
 	dev->clk = NULL;
@@ -589,6 +738,8 @@ static int davinci_i2c_remove(struct platform_device *pdev)
 	struct davinci_i2c_dev *dev = platform_get_drvdata(pdev);
 	struct resource *mem;
 
+	i2c_davinci_cpufreq_deregister(dev);
+
 	platform_set_drvdata(pdev, NULL);
 	i2c_del_adapter(&dev->adapter);
 	put_device(&pdev->dev);
@@ -599,6 +750,7 @@ static int davinci_i2c_remove(struct platform_device *pdev)
 
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
 	free_irq(IRQ_I2C, dev);
+	iounmap(dev->base);
 	kfree(dev);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -606,6 +758,41 @@ static int davinci_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int davinci_i2c_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+	/* put I2C into reset */
+	davinci_i2c_reset_ctrl(i2c_dev, 0);
+	clk_disable(i2c_dev->clk);
+
+	return 0;
+}
+
+static int davinci_i2c_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+	clk_enable(i2c_dev->clk);
+	/* take I2C out of reset */
+	davinci_i2c_reset_ctrl(i2c_dev, 1);
+
+	return 0;
+}
+
+static const struct dev_pm_ops davinci_i2c_pm = {
+	.suspend        = davinci_i2c_suspend,
+	.resume         = davinci_i2c_resume,
+};
+
+#define davinci_i2c_pm_ops (&davinci_i2c_pm)
+#else
+#define davinci_i2c_pm_ops NULL
+#endif
+
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:i2c_davinci");
 
@@ -615,6 +802,7 @@ static struct platform_driver davinci_i2c_driver = {
 	.driver		= {
 		.name	= "i2c_davinci",
 		.owner	= THIS_MODULE,
+		.pm	= davinci_i2c_pm_ops,
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index bf34413..43ca32f 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -661,7 +661,7 @@ static inline u8 iic_clckdiv(unsigned int opb)
 	return (u8)((opb + 9) / 10 - 1);
 }
 
-static int __devinit iic_request_irq(struct of_device *ofdev,
+static int __devinit iic_request_irq(struct platform_device *ofdev,
 				     struct ibm_iic_private *dev)
 {
 	struct device_node *np = ofdev->dev.of_node;
@@ -692,7 +692,7 @@ static int __devinit iic_request_irq(struct of_device *ofdev,
 /*
  * Register single IIC interface
  */
-static int __devinit iic_probe(struct of_device *ofdev,
+static int __devinit iic_probe(struct platform_device *ofdev,
 			       const struct of_device_id *match)
 {
 	struct device_node *np = ofdev->dev.of_node;
@@ -745,6 +745,7 @@ static int __devinit iic_probe(struct of_device *ofdev,
 	/* Register it with i2c layer */
 	adap = &dev->adap;
 	adap->dev.parent = &ofdev->dev;
+	adap->dev.of_node = of_node_get(np);
 	strlcpy(adap->name, "IBM IIC", sizeof(adap->name));
 	i2c_set_adapdata(adap, dev);
 	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
@@ -760,9 +761,6 @@ static int __devinit iic_probe(struct of_device *ofdev,
 	dev_info(&ofdev->dev, "using %s mode\n",
 		 dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
 
-	/* Now register all the child nodes */
-	of_register_i2c_devices(adap, np);
-
 	return 0;
 
 error_cleanup:
@@ -782,7 +780,7 @@ error_cleanup:
 /*
  * Cleanup initialized IIC interface
  */
-static int __devexit iic_remove(struct of_device *ofdev)
+static int __devexit iic_remove(struct platform_device *ofdev)
 {
 	struct ibm_iic_private *dev = dev_get_drvdata(&ofdev->dev);
 
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index df00eb1..a1c419a 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -63,6 +63,7 @@ struct mpc_i2c {
 	wait_queue_head_t queue;
 	struct i2c_adapter adap;
 	int irq;
+	u32 real_clk;
 };
 
 struct mpc_i2c_divider {
@@ -96,20 +97,23 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release
  * the bus, because it wants to send ACK.
  * Following sequence of enabling/disabling and sending start/stop generates
- * the pulse, so it's all OK.
+ * the 9 pulses, so it's all OK.
  */
 static void mpc_i2c_fixup(struct mpc_i2c *i2c)
 {
-	writeccr(i2c, 0);
-	udelay(30);
-	writeccr(i2c, CCR_MEN);
-	udelay(30);
-	writeccr(i2c, CCR_MSTA | CCR_MTX);
-	udelay(30);
-	writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
-	udelay(30);
-	writeccr(i2c, CCR_MEN);
-	udelay(30);
+	int k;
+	u32 delay_val = 1000000 / i2c->real_clk + 1;
+
+	if (delay_val < 2)
+		delay_val = 2;
+
+	for (k = 9; k; k--) {
+		writeccr(i2c, 0);
+		writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+		udelay(delay_val);
+		writeccr(i2c, CCR_MEN);
+		udelay(delay_val << 1);
+	}
 }
 
 static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
@@ -190,15 +194,18 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] __devinitconst = {
 };
 
 static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
-					  int prescaler)
+					  int prescaler, u32 *real_clk)
 {
 	const struct mpc_i2c_divider *div = NULL;
 	unsigned int pvr = mfspr(SPRN_PVR);
 	u32 divider;
 	int i;
 
-	if (clock == MPC_I2C_CLOCK_LEGACY)
+	if (clock == MPC_I2C_CLOCK_LEGACY) {
+		/* see below - default fdr = 0x3f -> div = 2048 */
+		*real_clk = mpc5xxx_get_bus_frequency(node) / 2048;
 		return -EINVAL;
+	}
 
 	/* Determine divider value */
 	divider = mpc5xxx_get_bus_frequency(node) / clock;
@@ -216,7 +223,8 @@ static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
 			break;
 	}
 
-	return div ? (int)div->fdr : -EINVAL;
+	*real_clk = mpc5xxx_get_bus_frequency(node) / div->divider;
+	return (int)div->fdr;
 }
 
 static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
@@ -231,13 +239,14 @@ static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
 		return;
 	}
 
-	ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
+	ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler, &i2c->real_clk);
 	fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
 
 	writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
 
 	if (ret >= 0)
-		dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
+		dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk,
+			 fdr);
 }
 #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
 static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
@@ -334,14 +343,17 @@ static u32 __devinit mpc_i2c_get_sec_cfg_8xxx(void)
 }
 
 static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
-					  u32 prescaler)
+					  u32 prescaler, u32 *real_clk)
 {
 	const struct mpc_i2c_divider *div = NULL;
 	u32 divider;
 	int i;
 
-	if (clock == MPC_I2C_CLOCK_LEGACY)
+	if (clock == MPC_I2C_CLOCK_LEGACY) {
+		/* see below - default fdr = 0x1031 -> div = 16 * 3072 */
+		*real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072);
 		return -EINVAL;
+	}
 
 	/* Determine proper divider value */
 	if (of_device_is_compatible(node, "fsl,mpc8544-i2c"))
@@ -364,6 +376,7 @@ static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
 			break;
 	}
 
+	*real_clk = fsl_get_sys_freq() / prescaler / div->divider;
 	return div ? (int)div->fdr : -EINVAL;
 }
 
@@ -380,7 +393,7 @@ static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
 		return;
 	}
 
-	ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+	ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler, &i2c->real_clk);
 	fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
 
 	writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
@@ -388,7 +401,7 @@ static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
 
 	if (ret >= 0)
 		dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
-			 clock, fdr >> 8, fdr & 0xff);
+			 i2c->real_clk, fdr >> 8, fdr & 0xff);
 }
 
 #else /* !CONFIG_FSL_SOC */
@@ -500,10 +513,14 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			return -EINTR;
 		}
 		if (time_after(jiffies, orig_jiffies + HZ)) {
+			u8 status = readb(i2c->base + MPC_I2C_SR);
+
 			dev_dbg(i2c->dev, "timeout\n");
-			if (readb(i2c->base + MPC_I2C_SR) ==
-			    (CSR_MCF | CSR_MBB | CSR_RXAK))
+			if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
+				writeb(status & ~CSR_MAL,
+				       i2c->base + MPC_I2C_SR);
 				mpc_i2c_fixup(i2c);
+			}
 			return -EIO;
 		}
 		schedule();
@@ -543,7 +560,7 @@ static struct i2c_adapter mpc_ops = {
 	.timeout = HZ,
 };
 
-static int __devinit fsl_i2c_probe(struct of_device *op,
+static int __devinit fsl_i2c_probe(struct platform_device *op,
 				   const struct of_device_id *match)
 {
 	struct mpc_i2c *i2c;
@@ -595,18 +612,26 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
 			mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock, 0);
 	}
 
+	prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
+	if (prop && plen == sizeof(u32)) {
+		mpc_ops.timeout = *prop * HZ / 1000000;
+		if (mpc_ops.timeout < 5)
+			mpc_ops.timeout = 5;
+	}
+	dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
+
 	dev_set_drvdata(&op->dev, i2c);
 
 	i2c->adap = mpc_ops;
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &op->dev;
+	i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
 
 	result = i2c_add_adapter(&i2c->adap);
 	if (result < 0) {
 		dev_err(i2c->dev, "failed to add adapter\n");
 		goto fail_add;
 	}
-	of_register_i2c_devices(&i2c->adap, op->dev.of_node);
 
 	return result;
 
@@ -621,7 +646,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
 	return result;
 };
 
-static int __devexit fsl_i2c_remove(struct of_device *op)
+static int __devexit fsl_i2c_remove(struct platform_device *op)
 {
 	struct mpc_i2c *i2c = dev_get_drvdata(&op->dev);
 
diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c
new file mode 100644
index 0000000..92d770d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-nuc900.c
@@ -0,0 +1,709 @@
+/*
+ * linux/drivers/i2c/busses/i2c-nuc900.c
+ *
+ * Copyright (c) 2010 Nuvoton technology corporation.
+ *
+ * This driver based on S3C2410 I2C driver of Ben Dooks <ben-Y5A6D6n0/KfQXOPxS62xeg@public.gmane.org>.
+ * Written by Wan ZongShun <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include <mach/mfp.h>
+#include <mach/i2c.h>
+
+/* nuc900 i2c registers offset */
+
+#define CSR		0x00
+#define DIVIDER		0x04
+#define CMDR		0x08
+#define SWR		0x0C
+#define RXR		0x10
+#define TXR		0x14
+
+/* nuc900 i2c CSR register bits */
+
+#define IRQEN		0x003
+#define I2CBUSY		0x400
+#define I2CSTART	0x018
+#define IRQFLAG		0x004
+#define ARBIT_LOST	0x200
+#define SLAVE_ACK	0x800
+
+/* nuc900 i2c CMDR register bits */
+
+#define I2C_CMD_START	0x10
+#define I2C_CMD_STOP	0x08
+#define I2C_CMD_READ	0x04
+#define I2C_CMD_WRITE	0x02
+#define I2C_CMD_NACK	0x01
+
+/* i2c controller state */
+
+enum nuc900_i2c_state {
+	STATE_IDLE,
+	STATE_START,
+	STATE_READ,
+	STATE_WRITE,
+	STATE_STOP
+};
+
+/* i2c controller private data */
+
+struct nuc900_i2c {
+	spinlock_t		lock;
+	wait_queue_head_t	wait;
+
+	struct i2c_msg		*msg;
+	unsigned int		msg_num;
+	unsigned int		msg_idx;
+	unsigned int		msg_ptr;
+	unsigned int		irq;
+
+	enum nuc900_i2c_state	state;
+
+	void __iomem		*regs;
+	struct clk		*clk;
+	struct device		*dev;
+	struct resource		*ioarea;
+	struct i2c_adapter	adap;
+};
+
+/* nuc900_i2c_master_complete
+ *
+ * complete the message and wake up the caller, using the given return code,
+ * or zero to mean ok.
+*/
+
+static inline void nuc900_i2c_master_complete(struct nuc900_i2c *i2c, int ret)
+{
+	dev_dbg(i2c->dev, "master_complete %d\n", ret);
+
+	i2c->msg_ptr = 0;
+	i2c->msg = NULL;
+	i2c->msg_idx++;
+	i2c->msg_num = 0;
+	if (ret)
+		i2c->msg_idx = ret;
+
+	wake_up(&i2c->wait);
+}
+
+/* irq enable/disable functions */
+
+static inline void nuc900_i2c_disable_irq(struct nuc900_i2c *i2c)
+{
+	unsigned long tmp;
+
+	tmp = readl(i2c->regs + CSR);
+	writel(tmp & ~IRQEN, i2c->regs + CSR);
+}
+
+static inline void nuc900_i2c_enable_irq(struct nuc900_i2c *i2c)
+{
+	unsigned long tmp;
+
+	tmp = readl(i2c->regs + CSR);
+	writel(tmp | IRQEN, i2c->regs + CSR);
+}
+
+
+/* nuc900_i2c_message_start
+ *
+ * put the start of a message onto the bus
+*/
+
+static void nuc900_i2c_message_start(struct nuc900_i2c *i2c,
+				      struct i2c_msg *msg)
+{
+	unsigned int addr = (msg->addr & 0x7f) << 1;
+
+	if (msg->flags & I2C_M_RD)
+		addr |= 0x1;
+	writel(addr & 0xff, i2c->regs + TXR);
+	writel(I2C_CMD_START | I2C_CMD_WRITE, i2c->regs + CMDR);
+}
+
+static inline void nuc900_i2c_stop(struct nuc900_i2c *i2c, int ret)
+{
+
+	dev_dbg(i2c->dev, "STOP\n");
+
+	/* stop the transfer */
+	i2c->state = STATE_STOP;
+	writel(I2C_CMD_STOP, i2c->regs + CMDR);
+
+	nuc900_i2c_master_complete(i2c, ret);
+	nuc900_i2c_disable_irq(i2c);
+}
+
+/* helper functions to determine the current state in the set of
+ * messages we are sending
+*/
+
+/* is_lastmsg()
+ *
+ * returns TRUE if the current message is the last in the set
+*/
+
+static inline int is_lastmsg(struct nuc900_i2c *i2c)
+{
+	return i2c->msg_idx >= (i2c->msg_num - 1);
+}
+
+/* is_msglast
+ *
+ * returns TRUE if we this is the last byte in the current message
+*/
+
+static inline int is_msglast(struct nuc900_i2c *i2c)
+{
+	return i2c->msg_ptr == i2c->msg->len-1;
+}
+
+/* is_msgend
+ *
+ * returns TRUE if we reached the end of the current message
+*/
+
+static inline int is_msgend(struct nuc900_i2c *i2c)
+{
+	return i2c->msg_ptr >= i2c->msg->len;
+}
+
+/* i2c_nuc900_irq_nextbyte
+ *
+ * process an interrupt and work out what to do
+ */
+
+static void i2c_nuc900_irq_nextbyte(struct nuc900_i2c *i2c,
+							unsigned long iicstat)
+{
+	unsigned char byte;
+
+	switch (i2c->state) {
+
+	case STATE_IDLE:
+		dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__);
+		break;
+
+	case STATE_STOP:
+		dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
+		nuc900_i2c_disable_irq(i2c);
+		break;
+
+	case STATE_START:
+		/* last thing we did was send a start condition on the
+		 * bus, or started a new i2c message
+		 */
+
+		if (iicstat & SLAVE_ACK &&
+		    !(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
+			/* ack was not received... */
+
+			dev_dbg(i2c->dev, "ack was not received\n");
+			nuc900_i2c_stop(i2c, -ENXIO);
+			break;
+		}
+
+		if (i2c->msg->flags & I2C_M_RD)
+			i2c->state = STATE_READ;
+		else
+			i2c->state = STATE_WRITE;
+
+		/* terminate the transfer if there is nothing to do
+		 * as this is used by the i2c probe to find devices.
+		*/
+
+		if (is_lastmsg(i2c) && i2c->msg->len == 0) {
+			nuc900_i2c_stop(i2c, 0);
+			break;
+		}
+
+		if (i2c->state == STATE_READ)
+			goto prepare_read;
+
+		/* fall through to the write state, as we will need to
+		 * send a byte as well
+		*/
+
+	case STATE_WRITE:
+		/* we are writing data to the device... check for the
+		 * end of the message, and if so, work out what to do
+		 */
+
+		if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
+			if (iicstat & SLAVE_ACK) {
+				dev_dbg(i2c->dev, "WRITE: No Ack\n");
+
+				nuc900_i2c_stop(i2c, -ECONNREFUSED);
+				break;
+			}
+		}
+
+retry_write:
+
+		if (!is_msgend(i2c)) {
+			byte = i2c->msg->buf[i2c->msg_ptr++];
+			writeb(byte, i2c->regs + TXR);
+			writel(I2C_CMD_WRITE, i2c->regs + CMDR);
+
+		} else if (!is_lastmsg(i2c)) {
+			/* we need to go to the next i2c message */
+
+			dev_dbg(i2c->dev, "WRITE: Next Message\n");
+
+			i2c->msg_ptr = 0;
+			i2c->msg_idx++;
+			i2c->msg++;
+
+			/* check to see if we need to do another message */
+			if (i2c->msg->flags & I2C_M_NOSTART) {
+
+				if (i2c->msg->flags & I2C_M_RD) {
+					/* cannot do this, the controller
+					 * forces us to send a new START
+					 * when we change direction
+					*/
+
+					nuc900_i2c_stop(i2c, -EINVAL);
+				}
+
+				goto retry_write;
+			} else {
+				/* send the new start */
+				nuc900_i2c_message_start(i2c, i2c->msg);
+				i2c->state = STATE_START;
+			}
+
+		} else {
+			/* send stop */
+
+			nuc900_i2c_stop(i2c, 0);
+		}
+		break;
+
+	case STATE_READ:
+		/* we have a byte of data in the data register, do
+		 * something with it, and then work out wether we are
+		 * going to do any more read/write
+		 */
+
+		byte = readb(i2c->regs + RXR);
+		i2c->msg->buf[i2c->msg_ptr++] = byte;
+
+prepare_read:
+		if (is_msglast(i2c)) {
+			/* last byte of buffer */
+
+			if (is_lastmsg(i2c))
+				writel(I2C_CMD_READ | I2C_CMD_NACK,
+							i2c->regs + CMDR);
+
+		} else if (is_msgend(i2c)) {
+			/* ok, we've read the entire buffer, see if there
+			 * is anything else we need to do
+			*/
+
+			if (is_lastmsg(i2c)) {
+				/* last message, send stop and complete */
+				dev_dbg(i2c->dev, "READ: Send Stop\n");
+
+				nuc900_i2c_stop(i2c, 0);
+			} else {
+				/* go to the next transfer */
+				dev_dbg(i2c->dev, "READ: Next Transfer\n");
+
+				i2c->msg_ptr = 0;
+				i2c->msg_idx++;
+				i2c->msg++;
+
+				writel(I2C_CMD_READ, i2c->regs + CMDR);
+			}
+
+		} else {
+			writel(I2C_CMD_READ, i2c->regs + CMDR);
+		}
+
+		break;
+	}
+}
+
+/* nuc900_i2c_irq
+ *
+ * top level IRQ servicing routine
+*/
+
+static irqreturn_t nuc900_i2c_irq(int irqno, void *dev_id)
+{
+	struct nuc900_i2c *i2c = dev_id;
+	unsigned long status;
+
+	status = readl(i2c->regs + CSR);
+	writel(status | IRQFLAG, i2c->regs + CSR);
+
+	if (status & ARBIT_LOST) {
+		/* deal with arbitration loss */
+		dev_err(i2c->dev, "deal with arbitration loss\n");
+		goto out;
+	}
+
+	if (i2c->state == STATE_IDLE) {
+		dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
+		goto out;
+	}
+
+	/* pretty much this leaves us with the fact that we've
+	 * transmitted or received whatever byte we last sent
+	*/
+
+	i2c_nuc900_irq_nextbyte(i2c, status);
+
+ out:
+	return IRQ_HANDLED;
+}
+
+
+/* nuc900_i2c_set_master
+ *
+ * get the i2c bus for a master transaction
+*/
+
+static int nuc900_i2c_set_master(struct nuc900_i2c *i2c)
+{
+	int timeout = 400;
+
+	while (timeout-- > 0) {
+		if (((readl(i2c->regs + SWR) & I2CSTART) == I2CSTART) &&
+				((readl(i2c->regs + CSR) & I2CBUSY) == 0)) {
+			return 0;
+		}
+
+		msleep(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+/* nuc900_i2c_doxfer
+ *
+ * this starts an i2c transfer
+*/
+
+static int nuc900_i2c_doxfer(struct nuc900_i2c *i2c,
+			      struct i2c_msg *msgs, int num)
+{
+	unsigned long iicstat, timeout;
+	int spins = 20;
+	int ret;
+
+	ret = nuc900_i2c_set_master(i2c);
+	if (ret != 0) {
+		dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	spin_lock_irq(&i2c->lock);
+
+	i2c->msg     = msgs;
+	i2c->msg_num = num;
+	i2c->msg_ptr = 0;
+	i2c->msg_idx = 0;
+	i2c->state   = STATE_START;
+
+	nuc900_i2c_message_start(i2c, msgs);
+	spin_unlock_irq(&i2c->lock);
+
+	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
+
+	ret = i2c->msg_idx;
+
+	/* having these next two as dev_err() makes life very
+	 * noisy when doing an i2cdetect
+	*/
+
+	if (timeout == 0)
+		dev_dbg(i2c->dev, "timeout\n");
+	else if (ret != num)
+		dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
+
+	/* ensure the stop has been through the bus */
+
+	dev_dbg(i2c->dev, "waiting for bus idle\n");
+
+	/* first, try busy waiting briefly */
+	do {
+		iicstat = readl(i2c->regs + CSR);
+	} while ((iicstat & I2CBUSY) && --spins);
+
+	/* if that timed out sleep */
+	if (!spins) {
+		msleep(1);
+		iicstat = readl(i2c->regs + CSR);
+	}
+
+	if (iicstat & I2CBUSY)
+		dev_warn(i2c->dev, "timeout waiting for bus idle\n");
+
+ out:
+	return ret;
+}
+
+/* nuc900_i2c_xfer
+ *
+ * first port of call from the i2c bus code when an message needs
+ * transferring across the i2c bus.
+*/
+
+static int nuc900_i2c_xfer(struct i2c_adapter *adap,
+			struct i2c_msg *msgs, int num)
+{
+	struct nuc900_i2c *i2c = (struct nuc900_i2c *)adap->algo_data;
+	int retry;
+	int ret;
+
+	nuc900_i2c_enable_irq(i2c);
+
+	for (retry = 0; retry < adap->retries; retry++) {
+
+		ret = nuc900_i2c_doxfer(i2c, msgs, num);
+
+		if (ret != -EAGAIN)
+			return ret;
+
+		dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
+
+		udelay(100);
+	}
+
+	return -EREMOTEIO;
+}
+
+/* declare our i2c functionality */
+static u32 nuc900_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+/* i2c bus registration info */
+
+static const struct i2c_algorithm nuc900_i2c_algorithm = {
+	.master_xfer		= nuc900_i2c_xfer,
+	.functionality		= nuc900_i2c_func,
+};
+
+/* nuc900_i2c_probe
+ *
+ * called by the bus driver when a suitable device is found
+*/
+
+static int __devinit nuc900_i2c_probe(struct platform_device *pdev)
+{
+	struct nuc900_i2c *i2c;
+	struct nuc900_platform_i2c *pdata;
+	struct resource *res;
+	int ret;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	i2c = kzalloc(sizeof(struct nuc900_i2c), GFP_KERNEL);
+	if (!i2c) {
+		dev_err(&pdev->dev, "no memory for state\n");
+		return -ENOMEM;
+	}
+
+	strlcpy(i2c->adap.name, "nuc900-i2c0", sizeof(i2c->adap.name));
+	i2c->adap.owner   = THIS_MODULE;
+	i2c->adap.algo    = &nuc900_i2c_algorithm;
+	i2c->adap.retries = 2;
+	i2c->adap.class   = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+
+	spin_lock_init(&i2c->lock);
+	init_waitqueue_head(&i2c->wait);
+
+	/* find the clock and enable it */
+
+	i2c->dev = &pdev->dev;
+	i2c->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c->clk)) {
+		dev_err(&pdev->dev, "cannot get clock\n");
+		ret = -ENOENT;
+		goto err_noclk;
+	}
+
+	dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
+
+	clk_enable(i2c->clk);
+
+	/* map the registers */
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "cannot find IO resource\n");
+		ret = -ENOENT;
+		goto err_clk;
+	}
+
+	i2c->ioarea = request_mem_region(res->start, resource_size(res),
+					 pdev->name);
+
+	if (i2c->ioarea == NULL) {
+		dev_err(&pdev->dev, "cannot request IO\n");
+		ret = -ENXIO;
+		goto err_clk;
+	}
+
+	i2c->regs = ioremap(res->start, resource_size(res));
+
+	if (i2c->regs == NULL) {
+		dev_err(&pdev->dev, "cannot map IO\n");
+		ret = -ENXIO;
+		goto err_ioarea;
+	}
+
+	dev_dbg(&pdev->dev, "registers %p (%p, %p)\n",
+		i2c->regs, i2c->ioarea, res);
+
+	/* setup info block for the i2c core */
+
+	i2c->adap.algo_data = i2c;
+	i2c->adap.dev.parent = &pdev->dev;
+
+	mfp_set_groupg(&pdev->dev);
+
+	clk_get_rate(i2c->clk);
+
+	ret = (i2c->clk.apbfreq)/(pdata->bus_freq * 5) - 1;
+	writel(ret & 0xffff, i2c->regs + DIVIDER);
+
+	/* find the IRQ for this unit (note, this relies on the init call to
+	 * ensure no current IRQs pending
+	 */
+
+	i2c->irq = ret = platform_get_irq(pdev, 0);
+	if (ret <= 0) {
+		dev_err(&pdev->dev, "cannot find IRQ\n");
+		goto err_iomap;
+	}
+
+	ret = request_irq(i2c->irq, nuc900_i2c_irq, IRQF_DISABLED | IRQF_SHARED,
+			  dev_name(&pdev->dev), i2c);
+
+	if (ret != 0) {
+		dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
+		goto err_iomap;
+	}
+
+	/* Note, previous versions of the driver used i2c_add_adapter()
+	 * to add the bus at any number. We now pass the bus number via
+	 * the platform data, so if unset it will now default to always
+	 * being bus 0.
+	 */
+
+	i2c->adap.nr = pdata->bus_num;
+
+	ret = i2c_add_numbered_adapter(&i2c->adap);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+		goto err_irq;
+	}
+
+	platform_set_drvdata(pdev, i2c);
+
+	dev_info(&pdev->dev, "%s: NUC900 I2C adapter\n",
+						dev_name(&i2c->adap.dev));
+	return 0;
+
+ err_irq:
+	free_irq(i2c->irq, i2c);
+
+ err_iomap:
+	iounmap(i2c->regs);
+
+ err_ioarea:
+	release_resource(i2c->ioarea);
+	kfree(i2c->ioarea);
+
+ err_clk:
+	clk_disable(i2c->clk);
+	clk_put(i2c->clk);
+
+ err_noclk:
+	kfree(i2c);
+	return ret;
+}
+
+/* nuc900_i2c_remove
+ *
+ * called when device is removed from the bus
+*/
+
+static int __devexit nuc900_i2c_remove(struct platform_device *pdev)
+{
+	struct nuc900_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+	free_irq(i2c->irq, i2c);
+
+	clk_disable(i2c->clk);
+	clk_put(i2c->clk);
+
+	iounmap(i2c->regs);
+
+	release_resource(i2c->ioarea);
+	kfree(i2c->ioarea);
+	kfree(i2c);
+
+	return 0;
+}
+
+static struct platform_driver nuc900_i2c_driver = {
+	.probe		= nuc900_i2c_probe,
+	.remove		= __devexit_p(nuc900_i2c_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "nuc900-i2c0",
+	},
+};
+
+static int __init i2c_adap_nuc900_init(void)
+{
+	return platform_driver_register(&nuc900_i2c_driver);
+}
+
+static void __exit i2c_adap_nuc900_exit(void)
+{
+	platform_driver_unregister(&nuc900_i2c_driver);
+}
+subsys_initcall(i2c_adap_nuc900_init);
+module_exit(i2c_adap_nuc900_exit);
+
+MODULE_DESCRIPTION("NUC900 I2C Bus driver");
+MODULE_AUTHOR("Wan ZongShun, <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nuc900-i2c0");
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 020ff23..c94e51b 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1001,7 +1001,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	struct pxa_i2c *i2c;
 	struct resource *res;
 	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
-	struct platform_device_id *id = platform_get_device_id(dev);
+	const struct platform_device_id *id = platform_get_device_id(dev);
 	int ret;
 	int irq;
 
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 97b84b8..2707f5e 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -119,8 +119,10 @@ struct sh_mobile_i2c_data {
 	struct i2c_adapter adap;
 
 	struct clk *clk;
+	u_int8_t icic;
 	u_int8_t iccl;
 	u_int8_t icch;
+	u_int8_t flags;
 
 	spinlock_t lock;
 	wait_queue_head_t wait;
@@ -129,15 +131,17 @@ struct sh_mobile_i2c_data {
 	int sr;
 };
 
+#define IIC_FLAG_HAS_ICIC67	(1 << 0)
+
 #define NORMAL_SPEED		100000 /* FAST_SPEED 400000 */
 
 /* Register offsets */
-#define ICDR(pd)		(pd->reg + 0x00)
-#define ICCR(pd)		(pd->reg + 0x04)
-#define ICSR(pd)		(pd->reg + 0x08)
-#define ICIC(pd)		(pd->reg + 0x0c)
-#define ICCL(pd)		(pd->reg + 0x10)
-#define ICCH(pd)		(pd->reg + 0x14)
+#define ICDR			0x00
+#define ICCR			0x04
+#define ICSR			0x08
+#define ICIC			0x0c
+#define ICCL			0x10
+#define ICCH			0x14
 
 /* Register bits */
 #define ICCR_ICE		0x80
@@ -155,11 +159,32 @@ struct sh_mobile_i2c_data {
 #define ICSR_WAIT		0x02
 #define ICSR_DTE		0x01
 
+#define ICIC_ICCLB8		0x80
+#define ICIC_ICCHB8		0x40
 #define ICIC_ALE		0x08
 #define ICIC_TACKE		0x04
 #define ICIC_WAITE		0x02
 #define ICIC_DTEE		0x01
 
+static void iic_wr(struct sh_mobile_i2c_data *pd, int offs, unsigned char data)
+{
+	if (offs == ICIC)
+		data |= pd->icic;
+
+	iowrite8(data, pd->reg + offs);
+}
+
+static unsigned char iic_rd(struct sh_mobile_i2c_data *pd, int offs)
+{
+	return ioread8(pd->reg + offs);
+}
+
+static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs,
+			unsigned char set, unsigned char clr)
+{
+	iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr);
+}
+
 static void activate_ch(struct sh_mobile_i2c_data *pd)
 {
 	unsigned long i2c_clk;
@@ -187,6 +212,14 @@ static void activate_ch(struct sh_mobile_i2c_data *pd)
 	else
 		pd->iccl = (u_int8_t)(num/denom);
 
+	/* one more bit of ICCL in ICIC */
+	if (pd->flags & IIC_FLAG_HAS_ICIC67) {
+		if ((num/denom) > 0xff)
+			pd->icic |= ICIC_ICCLB8;
+		else
+			pd->icic &= ~ICIC_ICCLB8;
+	}
+
 	/* Calculate the value for icch. From the data sheet:
 	   icch = (p clock / transfer rate) * (H / (L + H)) */
 	num = i2c_clk * 4;
@@ -196,25 +229,33 @@ static void activate_ch(struct sh_mobile_i2c_data *pd)
 	else
 		pd->icch = (u_int8_t)(num/denom);
 
+	/* one more bit of ICCH in ICIC */
+	if (pd->flags & IIC_FLAG_HAS_ICIC67) {
+		if ((num/denom) > 0xff)
+			pd->icic |= ICIC_ICCHB8;
+		else
+			pd->icic &= ~ICIC_ICCHB8;
+	}
+
 	/* Enable channel and configure rx ack */
-	iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
+	iic_set_clr(pd, ICCR, ICCR_ICE, 0);
 
 	/* Mask all interrupts */
-	iowrite8(0, ICIC(pd));
+	iic_wr(pd, ICIC, 0);
 
 	/* Set the clock */
-	iowrite8(pd->iccl, ICCL(pd));
-	iowrite8(pd->icch, ICCH(pd));
+	iic_wr(pd, ICCL, pd->iccl);
+	iic_wr(pd, ICCH, pd->icch);
 }
 
 static void deactivate_ch(struct sh_mobile_i2c_data *pd)
 {
 	/* Clear/disable interrupts */
-	iowrite8(0, ICSR(pd));
-	iowrite8(0, ICIC(pd));
+	iic_wr(pd, ICSR, 0);
+	iic_wr(pd, ICIC, 0);
 
 	/* Disable channel */
-	iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
+	iic_set_clr(pd, ICCR, 0, ICCR_ICE);
 
 	/* Disable clock and mark device as idle */
 	clk_disable(pd->clk);
@@ -233,35 +274,35 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
 
 	switch (op) {
 	case OP_START: /* issue start and trigger DTE interrupt */
-		iowrite8(0x94, ICCR(pd));
+		iic_wr(pd, ICCR, 0x94);
 		break;
 	case OP_TX_FIRST: /* disable DTE interrupt and write data */
-		iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
-		iowrite8(data, ICDR(pd));
+		iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+		iic_wr(pd, ICDR, data);
 		break;
 	case OP_TX: /* write data */
-		iowrite8(data, ICDR(pd));
+		iic_wr(pd, ICDR, data);
 		break;
 	case OP_TX_STOP: /* write data and issue a stop afterwards */
-		iowrite8(data, ICDR(pd));
-		iowrite8(0x90, ICCR(pd));
+		iic_wr(pd, ICDR, data);
+		iic_wr(pd, ICCR, 0x90);
 		break;
 	case OP_TX_TO_RX: /* select read mode */
-		iowrite8(0x81, ICCR(pd));
+		iic_wr(pd, ICCR, 0x81);
 		break;
 	case OP_RX: /* just read data */
-		ret = ioread8(ICDR(pd));
+		ret = iic_rd(pd, ICDR);
 		break;
 	case OP_RX_STOP: /* enable DTE interrupt, issue stop */
-		iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
-			 ICIC(pd));
-		iowrite8(0xc0, ICCR(pd));
+		iic_wr(pd, ICIC,
+		       ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+		iic_wr(pd, ICCR, 0xc0);
 		break;
 	case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
-		iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
-			 ICIC(pd));
-		ret = ioread8(ICDR(pd));
-		iowrite8(0xc0, ICCR(pd));
+		iic_wr(pd, ICIC,
+		       ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+		ret = iic_rd(pd, ICDR);
+		iic_wr(pd, ICCR, 0xc0);
 		break;
 	}
 
@@ -367,7 +408,7 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
 	unsigned char sr;
 	int wakeup;
 
-	sr = ioread8(ICSR(pd));
+	sr = iic_rd(pd, ICSR);
 	pd->sr |= sr; /* remember state */
 
 	dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
@@ -376,7 +417,7 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
 
 	if (sr & (ICSR_AL | ICSR_TACK)) {
 		/* don't interrupt transaction - continue to issue stop */
-		iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
+		iic_wr(pd, ICSR, sr & ~(ICSR_AL | ICSR_TACK));
 		wakeup = 0;
 	} else if (pd->msg->flags & I2C_M_RD)
 		wakeup = sh_mobile_i2c_isr_rx(pd);
@@ -384,7 +425,7 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
 		wakeup = sh_mobile_i2c_isr_tx(pd);
 
 	if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
-		iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
+		iic_wr(pd, ICSR, sr & ~ICSR_WAIT);
 
 	if (wakeup) {
 		pd->sr |= SW_DONE;
@@ -402,21 +443,21 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
 	}
 
 	/* Initialize channel registers */
-	iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
+	iic_set_clr(pd, ICCR, 0, ICCR_ICE);
 
 	/* Enable channel and configure rx ack */
-	iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
+	iic_set_clr(pd, ICCR, ICCR_ICE, 0);
 
 	/* Set the clock */
-	iowrite8(pd->iccl, ICCL(pd));
-	iowrite8(pd->icch, ICCH(pd));
+	iic_wr(pd, ICCL, pd->iccl);
+	iic_wr(pd, ICCH, pd->icch);
 
 	pd->msg = usr_msg;
 	pd->pos = -1;
 	pd->sr = 0;
 
 	/* Enable all interrupts to begin with */
-	iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
+	iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
 	return 0;
 }
 
@@ -451,7 +492,7 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
 
 		retry_count = 1000;
 again:
-		val = ioread8(ICSR(pd));
+		val = iic_rd(pd, ICSR);
 
 		dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
 
@@ -579,6 +620,12 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 		goto err_irq;
 	}
 
+	/* The IIC blocks on SH-Mobile ARM processors
+	 * come with two new bits in ICIC.
+	 */
+	if (size > 0x17)
+		pd->flags |= IIC_FLAG_HAS_ICIC67;
+
 	/* Enable Runtime PM for this device.
 	 *
 	 * Also tell the Runtime PM core to ignore children
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 0815e10..6649176 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -20,7 +20,9 @@
 /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
    All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
    SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
-   Jean Delvare <khali@linux-fr.org> */
+   Jean Delvare <khali@linux-fr.org>
+   Mux support by Rodolfo Giometti <giometti@enneenne.com> and
+   Michael Lawnick <michael.lawnick.ext@nsn.com> */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -30,6 +32,8 @@
 #include <linux/init.h>
 #include <linux/idr.h>
 #include <linux/mutex.h>
+#include <linux/of_i2c.h>
+#include <linux/of_device.h>
 #include <linux/completion.h>
 #include <linux/hardirq.h>
 #include <linux/irqflags.h>
@@ -70,6 +74,10 @@ static int i2c_device_match(struct device *dev, struct device_driver *drv)
 	if (!client)
 		return 0;
 
+	/* Attempt an OF style match */
+	if (of_driver_match_device(dev, drv))
+		return 1;
+
 	driver = to_i2c_driver(drv);
 	/* match on an id table if there is one */
 	if (driver->id_table)
@@ -417,11 +425,87 @@ static int __i2c_check_addr_busy(struct device *dev, void *addrp)
 	return 0;
 }
 
+/* walk up mux tree */
+static int i2c_check_mux_parents(struct i2c_adapter *adapter, int addr)
+{
+	int result;
+
+	result = device_for_each_child(&adapter->dev, &addr,
+					__i2c_check_addr_busy);
+
+	if (!result && i2c_parent_is_i2c_adapter(adapter))
+		result = i2c_check_mux_parents(
+				    to_i2c_adapter(adapter->dev.parent), addr);
+
+	return result;
+}
+
+/* recurse down mux tree */
+static int i2c_check_mux_children(struct device *dev, void *addrp)
+{
+	int result;
+
+	if (dev->type == &i2c_adapter_type)
+		result = device_for_each_child(dev, addrp,
+						i2c_check_mux_children);
+	else
+		result = __i2c_check_addr_busy(dev, addrp);
+
+	return result;
+}
+
 static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr)
 {
-	return device_for_each_child(&adapter->dev, &addr,
-				     __i2c_check_addr_busy);
+	int result = 0;
+
+	if (i2c_parent_is_i2c_adapter(adapter))
+		result = i2c_check_mux_parents(
+				    to_i2c_adapter(adapter->dev.parent), addr);
+
+	if (!result)
+		result = device_for_each_child(&adapter->dev, &addr,
+						i2c_check_mux_children);
+
+	return result;
+}
+
+/**
+ * i2c_lock_adapter - Get exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+void i2c_lock_adapter(struct i2c_adapter *adapter)
+{
+	if (i2c_parent_is_i2c_adapter(adapter))
+		i2c_lock_adapter(to_i2c_adapter(adapter->dev.parent));
+	else
+		rt_mutex_lock(&adapter->bus_lock);
+}
+EXPORT_SYMBOL_GPL(i2c_lock_adapter);
+
+/**
+ * i2c_trylock_adapter - Try to get exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+static int i2c_trylock_adapter(struct i2c_adapter *adapter)
+{
+	if (i2c_parent_is_i2c_adapter(adapter))
+		return i2c_trylock_adapter(to_i2c_adapter(adapter->dev.parent));
+	else
+		return rt_mutex_trylock(&adapter->bus_lock);
+}
+
+/**
+ * i2c_unlock_adapter - Release exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+void i2c_unlock_adapter(struct i2c_adapter *adapter)
+{
+	if (i2c_parent_is_i2c_adapter(adapter))
+		i2c_unlock_adapter(to_i2c_adapter(adapter->dev.parent));
+	else
+		rt_mutex_unlock(&adapter->bus_lock);
 }
+EXPORT_SYMBOL_GPL(i2c_unlock_adapter);
 
 /**
  * i2c_new_device - instantiate an i2c device
@@ -627,9 +711,9 @@ i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 
 	/* Keep track of the added device */
-	i2c_lock_adapter(adap);
+	mutex_lock(&adap->userspace_clients_lock);
 	list_add_tail(&client->detected, &adap->userspace_clients);
-	i2c_unlock_adapter(adap);
+	mutex_unlock(&adap->userspace_clients_lock);
 	dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
 		 info.type, info.addr);
 
@@ -668,7 +752,7 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
 
 	/* Make sure the device was added through sysfs */
 	res = -ENOENT;
-	i2c_lock_adapter(adap);
+	mutex_lock(&adap->userspace_clients_lock);
 	list_for_each_entry_safe(client, next, &adap->userspace_clients,
 				 detected) {
 		if (client->addr == addr) {
@@ -681,7 +765,7 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
 			break;
 		}
 	}
-	i2c_unlock_adapter(adap);
+	mutex_unlock(&adap->userspace_clients_lock);
 
 	if (res < 0)
 		dev_err(dev, "%s: Can't find device in list\n",
@@ -708,10 +792,11 @@ static const struct attribute_group *i2c_adapter_attr_groups[] = {
 	NULL
 };
 
-static struct device_type i2c_adapter_type = {
+struct device_type i2c_adapter_type = {
 	.groups		= i2c_adapter_attr_groups,
 	.release	= i2c_adapter_dev_release,
 };
+EXPORT_SYMBOL_GPL(i2c_adapter_type);
 
 #ifdef CONFIG_I2C_COMPAT
 static struct class_compat *i2c_adapter_compat_class;
@@ -754,7 +839,7 @@ static int __process_new_adapter(struct device_driver *d, void *data)
 
 static int i2c_register_adapter(struct i2c_adapter *adap)
 {
-	int res = 0, dummy;
+	int res = 0;
 
 	/* Can't register until after driver model init */
 	if (unlikely(WARN_ON(!i2c_bus_type.p))) {
@@ -763,6 +848,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 	}
 
 	rt_mutex_init(&adap->bus_lock);
+	mutex_init(&adap->userspace_clients_lock);
 	INIT_LIST_HEAD(&adap->userspace_clients);
 
 	/* Set default timeout to 1 second if not already set */
@@ -790,10 +876,12 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 	if (adap->nr < __i2c_first_dynamic_bus_num)
 		i2c_scan_static_board_info(adap);
 
+	/* Register devices from the device tree */
+	of_i2c_register_devices(adap);
+
 	/* Notify drivers */
 	mutex_lock(&core_lock);
-	dummy = bus_for_each_drv(&i2c_bus_type, NULL, adap,
-				 __process_new_adapter);
+	bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
 	mutex_unlock(&core_lock);
 
 	return 0;
@@ -966,7 +1054,7 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 		return res;
 
 	/* Remove devices instantiated from sysfs */
-	i2c_lock_adapter(adap);
+	mutex_lock(&adap->userspace_clients_lock);
 	list_for_each_entry_safe(client, next, &adap->userspace_clients,
 				 detected) {
 		dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
@@ -974,7 +1062,7 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 		list_del(&client->detected);
 		i2c_unregister_device(client);
 	}
-	i2c_unlock_adapter(adap);
+	mutex_unlock(&adap->userspace_clients_lock);
 
 	/* Detach any active clients. This can't fail, thus we do not
 	   checking the returned value. */
@@ -1229,12 +1317,12 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 #endif
 
 		if (in_atomic() || irqs_disabled()) {
-			ret = rt_mutex_trylock(&adap->bus_lock);
+			ret = i2c_trylock_adapter(adap);
 			if (!ret)
 				/* I2C activity is ongoing. */
 				return -EAGAIN;
 		} else {
-			rt_mutex_lock(&adap->bus_lock);
+			i2c_lock_adapter(adap);
 		}
 
 		/* Retry automatically on arbitration loss */
@@ -1246,7 +1334,7 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			if (time_after(jiffies, orig_jiffies + adap->timeout))
 				break;
 		}
-		rt_mutex_unlock(&adap->bus_lock);
+		i2c_unlock_adapter(adap);
 
 		return ret;
 	} else {
@@ -1341,13 +1429,17 @@ static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr)
 				     I2C_SMBUS_BYTE_DATA, &dummy);
 	else
 #endif
-	if ((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50
-	 || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK))
-		err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
-				     I2C_SMBUS_BYTE, &dummy);
-	else
+	if (!((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50)
+	 && i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK))
 		err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_WRITE, 0,
 				     I2C_SMBUS_QUICK, NULL);
+	else if (i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE))
+		err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+				     I2C_SMBUS_BYTE, &dummy);
+	else {
+		dev_warn(&adap->dev, "No suitable probing method supported\n");
+		err = -EOPNOTSUPP;
+	}
 
 	return err >= 0;
 }
@@ -1428,16 +1520,6 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 	if (!(adapter->class & driver->class))
 		goto exit_free;
 
-	/* Stop here if the bus doesn't support probing */
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE)) {
-		if (address_list[0] == I2C_CLIENT_END)
-			goto exit_free;
-
-		dev_warn(&adapter->dev, "Probing not supported\n");
-		err = -EOPNOTSUPP;
-		goto exit_free;
-	}
-
 	for (i = 0; address_list[i] != I2C_CLIENT_END; i += 1) {
 		dev_dbg(&adapter->dev, "found normal entry for adapter %d, "
 			"addr 0x%02x\n", adap_id, address_list[i]);
@@ -1452,18 +1534,23 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 	return err;
 }
 
+int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr)
+{
+	return i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+			      I2C_SMBUS_QUICK, NULL) >= 0;
+}
+EXPORT_SYMBOL_GPL(i2c_probe_func_quick_read);
+
 struct i2c_client *
 i2c_new_probed_device(struct i2c_adapter *adap,
 		      struct i2c_board_info *info,
-		      unsigned short const *addr_list)
+		      unsigned short const *addr_list,
+		      int (*probe)(struct i2c_adapter *, unsigned short addr))
 {
 	int i;
 
-	/* Stop here if the bus doesn't support probing */
-	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE)) {
-		dev_err(&adap->dev, "Probing not supported\n");
-		return NULL;
-	}
+	if (!probe)
+		probe = i2c_default_probe;
 
 	for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
 		/* Check address validity */
@@ -1481,7 +1568,7 @@ i2c_new_probed_device(struct i2c_adapter *adap,
 		}
 
 		/* Test address responsiveness */
-		if (i2c_default_probe(adap, addr_list[i]))
+		if (probe(adap, addr_list[i]))
 			break;
 	}
 
@@ -1993,7 +2080,7 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
 	flags &= I2C_M_TEN | I2C_CLIENT_PEC;
 
 	if (adapter->algo->smbus_xfer) {
-		rt_mutex_lock(&adapter->bus_lock);
+		i2c_lock_adapter(adapter);
 
 		/* Retry automatically on arbitration loss */
 		orig_jiffies = jiffies;
@@ -2007,7 +2094,7 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
 				       orig_jiffies + adapter->timeout))
 				break;
 		}
-		rt_mutex_unlock(&adapter->bus_lock);
+		i2c_unlock_adapter(adapter);
 	} else
 		res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
 					      command, protocol, data);
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index e0694e4..5f3a52d 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -167,13 +167,9 @@ static ssize_t i2cdev_write(struct file *file, const char __user *buf,
 	if (count > 8192)
 		count = 8192;
 
-	tmp = kmalloc(count, GFP_KERNEL);
-	if (tmp == NULL)
-		return -ENOMEM;
-	if (copy_from_user(tmp, buf, count)) {
-		kfree(tmp);
-		return -EFAULT;
-	}
+	tmp = memdup_user(buf, count);
+	if (IS_ERR(tmp))
+		return PTR_ERR(tmp);
 
 	pr_debug("i2c-dev: i2c-%d writing %zu bytes.\n",
 		iminor(file->f_path.dentry->d_inode), count);
@@ -193,12 +189,50 @@ static int i2cdev_check(struct device *dev, void *addrp)
 	return dev->driver ? -EBUSY : 0;
 }
 
+/* walk up mux tree */
+static int i2cdev_check_mux_parents(struct i2c_adapter *adapter, int addr)
+{
+	int result;
+
+	result = device_for_each_child(&adapter->dev, &addr, i2cdev_check);
+
+	if (!result && i2c_parent_is_i2c_adapter(adapter))
+		result = i2cdev_check_mux_parents(
+				    to_i2c_adapter(adapter->dev.parent), addr);
+
+	return result;
+}
+
+/* recurse down mux tree */
+static int i2cdev_check_mux_children(struct device *dev, void *addrp)
+{
+	int result;
+
+	if (dev->type == &i2c_adapter_type)
+		result = device_for_each_child(dev, addrp,
+						i2cdev_check_mux_children);
+	else
+		result = i2cdev_check(dev, addrp);
+
+	return result;
+}
+
 /* This address checking function differs from the one in i2c-core
    in that it considers an address with a registered device, but no
    driver bound to it, as NOT busy. */
 static int i2cdev_check_addr(struct i2c_adapter *adapter, unsigned int addr)
 {
-	return device_for_each_child(&adapter->dev, &addr, i2cdev_check);
+	int result = 0;
+
+	if (i2c_parent_is_i2c_adapter(adapter))
+		result = i2cdev_check_mux_parents(
+				    to_i2c_adapter(adapter->dev.parent), addr);
+
+	if (!result)
+		result = device_for_each_child(&adapter->dev, &addr,
+						i2cdev_check_mux_children);
+
+	return result;
 }
 
 static noinline int i2cdev_ioctl_rdrw(struct i2c_client *client,
@@ -219,9 +253,7 @@ static noinline int i2cdev_ioctl_rdrw(struct i2c_client *client,
 	if (rdwr_arg.nmsgs > I2C_RDRW_IOCTL_MAX_MSGS)
 		return -EINVAL;
 
-	rdwr_pa = (struct i2c_msg *)
-		kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg),
-		GFP_KERNEL);
+	rdwr_pa = kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg), GFP_KERNEL);
 	if (!rdwr_pa)
 		return -ENOMEM;
 
@@ -247,15 +279,9 @@ static noinline int i2cdev_ioctl_rdrw(struct i2c_client *client,
 			break;
 		}
 		data_ptrs[i] = (u8 __user *)rdwr_pa[i].buf;
-		rdwr_pa[i].buf = kmalloc(rdwr_pa[i].len, GFP_KERNEL);
-		if (rdwr_pa[i].buf == NULL) {
-			res = -ENOMEM;
-			break;
-		}
-		if (copy_from_user(rdwr_pa[i].buf, data_ptrs[i],
-				   rdwr_pa[i].len)) {
-				++i; /* Needs to be kfreed too */
-				res = -EFAULT;
+		rdwr_pa[i].buf = memdup_user(data_ptrs[i], rdwr_pa[i].len);
+		if (IS_ERR(rdwr_pa[i].buf)) {
+			res = PTR_ERR(rdwr_pa[i].buf);
 			break;
 		}
 	}
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
new file mode 100644
index 0000000..d32a484
--- /dev/null
+++ b/drivers/i2c/i2c-mux.c
@@ -0,0 +1,165 @@
+/*
+ * Multiplexed I2C bus driver.
+ *
+ * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ * Copyright (c) 2009-2010 NSN GmbH & Co KG <michael.lawnick.ext@nsn.com>
+ *
+ * Simplifies access to complex multiplexed I2C bus topologies, by presenting
+ * each multiplexed bus segment as an additional I2C adapter.
+ * Supports multi-level mux'ing (mux behind a mux).
+ *
+ * Based on:
+ *	i2c-virt.c from Kumar Gala <galak@kernel.crashing.org>
+ *	i2c-virtual.c from Ken Harrenstien, Copyright (c) 2004 Google, Inc.
+ *	i2c-virtual.c from Brian Kuschak <bkuschak@yahoo.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+
+/* multiplexer per channel data */
+struct i2c_mux_priv {
+	struct i2c_adapter adap;
+	struct i2c_algorithm algo;
+
+	struct i2c_adapter *parent;
+	void *mux_dev;	/* the mux chip/device */
+	u32  chan_id;	/* the channel id */
+
+	int (*select)(struct i2c_adapter *, void *mux_dev, u32 chan_id);
+	int (*deselect)(struct i2c_adapter *, void *mux_dev, u32 chan_id);
+};
+
+static int i2c_mux_master_xfer(struct i2c_adapter *adap,
+			       struct i2c_msg msgs[], int num)
+{
+	struct i2c_mux_priv *priv = adap->algo_data;
+	struct i2c_adapter *parent = priv->parent;
+	int ret;
+
+	/* Switch to the right mux port and perform the transfer. */
+
+	ret = priv->select(parent, priv->mux_dev, priv->chan_id);
+	if (ret >= 0)
+		ret = parent->algo->master_xfer(parent, msgs, num);
+	if (priv->deselect)
+		priv->deselect(parent, priv->mux_dev, priv->chan_id);
+
+	return ret;
+}
+
+static int i2c_mux_smbus_xfer(struct i2c_adapter *adap,
+			      u16 addr, unsigned short flags,
+			      char read_write, u8 command,
+			      int size, union i2c_smbus_data *data)
+{
+	struct i2c_mux_priv *priv = adap->algo_data;
+	struct i2c_adapter *parent = priv->parent;
+	int ret;
+
+	/* Select the right mux port and perform the transfer. */
+
+	ret = priv->select(parent, priv->mux_dev, priv->chan_id);
+	if (ret >= 0)
+		ret = parent->algo->smbus_xfer(parent, addr, flags,
+					read_write, command, size, data);
+	if (priv->deselect)
+		priv->deselect(parent, priv->mux_dev, priv->chan_id);
+
+	return ret;
+}
+
+/* Return the parent's functionality */
+static u32 i2c_mux_functionality(struct i2c_adapter *adap)
+{
+	struct i2c_mux_priv *priv = adap->algo_data;
+	struct i2c_adapter *parent = priv->parent;
+
+	return parent->algo->functionality(parent);
+}
+
+struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
+				void *mux_dev, u32 force_nr, u32 chan_id,
+				int (*select) (struct i2c_adapter *,
+					       void *, u32),
+				int (*deselect) (struct i2c_adapter *,
+						 void *, u32))
+{
+	struct i2c_mux_priv *priv;
+	int ret;
+
+	priv = kzalloc(sizeof(struct i2c_mux_priv), GFP_KERNEL);
+	if (!priv)
+		return NULL;
+
+	/* Set up private adapter data */
+	priv->parent = parent;
+	priv->mux_dev = mux_dev;
+	priv->chan_id = chan_id;
+	priv->select = select;
+	priv->deselect = deselect;
+
+	/* Need to do algo dynamically because we don't know ahead
+	 * of time what sort of physical adapter we'll be dealing with.
+	 */
+	if (parent->algo->master_xfer)
+		priv->algo.master_xfer = i2c_mux_master_xfer;
+	if (parent->algo->smbus_xfer)
+		priv->algo.smbus_xfer = i2c_mux_smbus_xfer;
+	priv->algo.functionality = i2c_mux_functionality;
+
+	/* Now fill out new adapter structure */
+	snprintf(priv->adap.name, sizeof(priv->adap.name),
+		 "i2c-%d-mux (chan_id %d)", i2c_adapter_id(parent), chan_id);
+	priv->adap.owner = THIS_MODULE;
+	priv->adap.id = parent->id;
+	priv->adap.algo = &priv->algo;
+	priv->adap.algo_data = priv;
+	priv->adap.dev.parent = &parent->dev;
+
+	if (force_nr) {
+		priv->adap.nr = force_nr;
+		ret = i2c_add_numbered_adapter(&priv->adap);
+	} else {
+		ret = i2c_add_adapter(&priv->adap);
+	}
+	if (ret < 0) {
+		dev_err(&parent->dev,
+			"failed to add mux-adapter (error=%d)\n",
+			ret);
+		kfree(priv);
+		return NULL;
+	}
+
+	dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
+		 i2c_adapter_id(&priv->adap));
+
+	return &priv->adap;
+}
+EXPORT_SYMBOL_GPL(i2c_add_mux_adapter);
+
+int i2c_del_mux_adapter(struct i2c_adapter *adap)
+{
+	struct i2c_mux_priv *priv = adap->algo_data;
+	int ret;
+
+	ret = i2c_del_adapter(adap);
+	if (ret < 0)
+		return ret;
+	kfree(priv);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i2c_del_mux_adapter);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("I2C driver for multiplexed I2C busses");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
new file mode 100644
index 0000000..4c9a99c
--- /dev/null
+++ b/drivers/i2c/muxes/Kconfig
@@ -0,0 +1,18 @@
+#
+# Multiplexer I2C chip drivers configuration
+#
+
+menu "Multiplexer I2C Chip support"
+	depends on I2C_MUX
+
+config I2C_MUX_PCA954x
+	tristate "Philips PCA954x I2C Mux/switches"
+	depends on EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Philips PCA954x
+	  I2C mux/switch devices.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called pca954x.
+
+endmenu
diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
new file mode 100644
index 0000000..bd83b527
--- /dev/null
+++ b/drivers/i2c/muxes/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for multiplexer I2C chip drivers.
+
+obj-$(CONFIG_I2C_MUX_PCA954x)	+= pca954x.o
+
+ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c
new file mode 100644
index 0000000..6f9accf
--- /dev/null
+++ b/drivers/i2c/muxes/pca954x.c
@@ -0,0 +1,301 @@
+/*
+ * I2C multiplexer
+ *
+ * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This module supports the PCA954x series of I2C multiplexer/switch chips
+ * made by Philips Semiconductors.
+ * This includes the:
+ *	 PCA9540, PCA9542, PCA9543, PCA9544, PCA9545, PCA9546, PCA9547
+ *	 and PCA9548.
+ *
+ * These chips are all controlled via the I2C bus itself, and all have a
+ * single 8-bit register. The upstream "parent" bus fans out to two,
+ * four, or eight downstream busses or channels; which of these
+ * are selected is determined by the chip type and register contents. A
+ * mux can select only one sub-bus at a time; a switch can select any
+ * combination simultaneously.
+ *
+ * Based on:
+ *	pca954x.c from Kumar Gala <galak@kernel.crashing.org>
+ * Copyright (C) 2006
+ *
+ * Based on:
+ *	pca954x.c from Ken Harrenstien
+ * Copyright (C) 2004 Google, Inc. (Ken Harrenstien)
+ *
+ * Based on:
+ *	i2c-virtual_cb.c from Brian Kuschak <bkuschak@yahoo.com>
+ * and
+ *	pca9540.c from Jean Delvare <khali@linux-fr.org>.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+
+#include <linux/i2c/pca954x.h>
+
+#define PCA954X_MAX_NCHANS 8
+
+enum pca_type {
+	pca_9540,
+	pca_9542,
+	pca_9543,
+	pca_9544,
+	pca_9545,
+	pca_9546,
+	pca_9547,
+	pca_9548,
+};
+
+struct pca954x {
+	enum pca_type type;
+	struct i2c_adapter *virt_adaps[PCA954X_MAX_NCHANS];
+
+	u8 last_chan;		/* last register value */
+};
+
+struct chip_desc {
+	u8 nchans;
+	u8 enable;	/* used for muxes only */
+	enum muxtype {
+		pca954x_ismux = 0,
+		pca954x_isswi
+	} muxtype;
+};
+
+/* Provide specs for the PCA954x types we know about */
+static const struct chip_desc chips[] = {
+	[pca_9540] = {
+		.nchans = 2,
+		.enable = 0x4,
+		.muxtype = pca954x_ismux,
+	},
+	[pca_9543] = {
+		.nchans = 2,
+		.muxtype = pca954x_isswi,
+	},
+	[pca_9544] = {
+		.nchans = 4,
+		.enable = 0x4,
+		.muxtype = pca954x_ismux,
+	},
+	[pca_9545] = {
+		.nchans = 4,
+		.muxtype = pca954x_isswi,
+	},
+	[pca_9547] = {
+		.nchans = 8,
+		.enable = 0x8,
+		.muxtype = pca954x_ismux,
+	},
+	[pca_9548] = {
+		.nchans = 8,
+		.muxtype = pca954x_isswi,
+	},
+};
+
+static const struct i2c_device_id pca954x_id[] = {
+	{ "pca9540", pca_9540 },
+	{ "pca9542", pca_9540 },
+	{ "pca9543", pca_9543 },
+	{ "pca9544", pca_9544 },
+	{ "pca9545", pca_9545 },
+	{ "pca9546", pca_9545 },
+	{ "pca9547", pca_9547 },
+	{ "pca9548", pca_9548 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pca954x_id);
+
+/* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer()
+   for this as they will try to lock adapter a second time */
+static int pca954x_reg_write(struct i2c_adapter *adap,
+			     struct i2c_client *client, u8 val)
+{
+	int ret = -ENODEV;
+
+	if (adap->algo->master_xfer) {
+		struct i2c_msg msg;
+		char buf[1];
+
+		msg.addr = client->addr;
+		msg.flags = 0;
+		msg.len = 1;
+		buf[0] = val;
+		msg.buf = buf;
+		ret = adap->algo->master_xfer(adap, &msg, 1);
+	} else {
+		union i2c_smbus_data data;
+		ret = adap->algo->smbus_xfer(adap, client->addr,
+					     client->flags,
+					     I2C_SMBUS_WRITE,
+					     val, I2C_SMBUS_BYTE, &data);
+	}
+
+	return ret;
+}
+
+static int pca954x_select_chan(struct i2c_adapter *adap,
+			       void *client, u32 chan)
+{
+	struct pca954x *data = i2c_get_clientdata(client);
+	const struct chip_desc *chip = &chips[data->type];
+	u8 regval;
+	int ret = 0;
+
+	/* we make switches look like muxes, not sure how to be smarter */
+	if (chip->muxtype == pca954x_ismux)
+		regval = chan | chip->enable;
+	else
+		regval = 1 << chan;
+
+	/* Only select the channel if its different from the last channel */
+	if (data->last_chan != regval) {
+		ret = pca954x_reg_write(adap, client, regval);
+		data->last_chan = regval;
+	}
+
+	return ret;
+}
+
+static int pca954x_deselect_mux(struct i2c_adapter *adap,
+				void *client, u32 chan)
+{
+	struct pca954x *data = i2c_get_clientdata(client);
+
+	/* Deselect active channel */
+	data->last_chan = 0;
+	return pca954x_reg_write(adap, client, data->last_chan);
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+static int __devinit pca954x_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
+	struct pca954x_platform_data *pdata = client->dev.platform_data;
+	int num, force;
+	struct pca954x *data;
+	int ret = -ENODEV;
+
+	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE))
+		goto err;
+
+	data = kzalloc(sizeof(struct pca954x), GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	i2c_set_clientdata(client, data);
+
+	/* Read the mux register at addr to verify
+	 * that the mux is in fact present.
+	 */
+	if (i2c_smbus_read_byte(client) < 0) {
+		dev_warn(&client->dev, "probe failed\n");
+		goto exit_free;
+	}
+
+	data->type = id->driver_data;
+	data->last_chan = 0;		   /* force the first selection */
+
+	/* Now create an adapter for each channel */
+	for (num = 0; num < chips[data->type].nchans; num++) {
+		force = 0;			  /* dynamic adap number */
+		if (pdata) {
+			if (num < pdata->num_modes)
+				/* force static number */
+				force = pdata->modes[num].adap_id;
+			else
+				/* discard unconfigured channels */
+				break;
+		}
+
+		data->virt_adaps[num] =
+			i2c_add_mux_adapter(adap, client,
+				force, num, pca954x_select_chan,
+				(pdata && pdata->modes[num].deselect_on_exit)
+					? pca954x_deselect_mux : NULL);
+
+		if (data->virt_adaps[num] == NULL) {
+			ret = -ENODEV;
+			dev_err(&client->dev,
+				"failed to register multiplexed adapter"
+				" %d as bus %d\n", num, force);
+			goto virt_reg_failed;
+		}
+	}
+
+	dev_info(&client->dev,
+		 "registered %d multiplexed busses for I2C %s %s\n",
+		 num, chips[data->type].muxtype == pca954x_ismux
+				? "mux" : "switch", client->name);
+
+	return 0;
+
+virt_reg_failed:
+	for (num--; num >= 0; num--)
+		i2c_del_mux_adapter(data->virt_adaps[num]);
+exit_free:
+	kfree(data);
+err:
+	return ret;
+}
+
+static int __devexit pca954x_remove(struct i2c_client *client)
+{
+	struct pca954x *data = i2c_get_clientdata(client);
+	const struct chip_desc *chip = &chips[data->type];
+	int i, err;
+
+	for (i = 0; i < chip->nchans; ++i)
+		if (data->virt_adaps[i]) {
+			err = i2c_del_mux_adapter(data->virt_adaps[i]);
+			if (err)
+				return err;
+			data->virt_adaps[i] = NULL;
+		}
+
+	kfree(data);
+	return 0;
+}
+
+static struct i2c_driver pca954x_driver = {
+	.driver		= {
+		.name	= "pca954x",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pca954x_probe,
+	.remove		= __devexit_p(pca954x_remove),
+	.id_table	= pca954x_id,
+};
+
+static int __init pca954x_init(void)
+{
+	return i2c_add_driver(&pca954x_driver);
+}
+
+static void __exit pca954x_exit(void)
+{
+	i2c_del_driver(&pca954x_driver);
+}
+
+module_init(pca954x_init);
+module_exit(pca954x_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("PCA954x I2C mux/switch driver");
+MODULE_LICENSE("GPL v2");