Merge tag 'v3.9-rc5' into devel

Linux 3.9-rc5

Conflicts:
	drivers/pinctrl/pinconf.c

5 files changed, 19 insertions, 6 deletions

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 46cde098..e380c6e 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig I2C
 	tristate "I2C support"
-	depends on !S390
 	select RT_MUTEXES
 	---help---
 	  I2C (pronounce: I-squared-C) is a slow serial bus protocol used in
@@ -76,6 +75,7 @@ config I2C_HELPER_AUTO
 
 config I2C_SMBUS
 	tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
+	depends on GENERIC_HARDIRQS
 	help
 	  Say Y here if you want support for SMBus extensions to the I2C
 	  specification. At the moment, the only supported extension is
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a3725de..adfee98 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -114,7 +114,7 @@ config I2C_I801
 
 config I2C_ISCH
 	tristate "Intel SCH SMBus 1.0"
-	depends on PCI
+	depends on PCI && GENERIC_HARDIRQS
 	select LPC_SCH
 	help
 	  Say Y here if you want to use SMBus controller on the Intel SCH
@@ -543,6 +543,7 @@ config I2C_NUC900
 
 config I2C_OCORES
 	tristate "OpenCores I2C Controller"
+	depends on GENERIC_HARDIRQS
 	help
 	  If you say yes to this option, support will be included for the
 	  OpenCores I2C controller. For details see
@@ -777,7 +778,7 @@ config I2C_DIOLAN_U2C
 
 config I2C_PARPORT
 	tristate "Parallel port adapter"
-	depends on PARPORT
+	depends on PARPORT && GENERIC_HARDIRQS
 	select I2C_ALGOBIT
 	select I2C_SMBUS
 	help
@@ -802,6 +803,7 @@ config I2C_PARPORT
 
 config I2C_PARPORT_LIGHT
 	tristate "Parallel port adapter (light)"
+	depends on GENERIC_HARDIRQS
 	select I2C_ALGOBIT
 	select I2C_SMBUS
 	help
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index e9205ee..130f02c 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -80,6 +80,7 @@
 /* PCI DIDs for the Intel SMBus Message Transport (SMT) Devices */
 #define PCI_DEVICE_ID_INTEL_S1200_SMT0	0x0c59
 #define PCI_DEVICE_ID_INTEL_S1200_SMT1	0x0c5a
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMT	0x1f15
 
 #define ISMT_DESC_ENTRIES	32	/* number of descriptor entries */
 #define ISMT_MAX_RETRIES	3	/* number of SMBus retries to attempt */
@@ -185,6 +186,7 @@ struct ismt_priv {
 static const DEFINE_PCI_DEVICE_TABLE(ismt_ids) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) },
 	{ 0, }
 };
 
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 36704e3..b714776 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -411,7 +411,11 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 	int clk_multiplier = I2C_CLK_MULTIPLIER_STD_FAST_MODE;
 	u32 clk_divisor;
 
-	tegra_i2c_clock_enable(i2c_dev);
+	err = tegra_i2c_clock_enable(i2c_dev);
+	if (err < 0) {
+		dev_err(i2c_dev->dev, "Clock enable failed %d\n", err);
+		return err;
+	}
 
 	tegra_periph_reset_assert(i2c_dev->div_clk);
 	udelay(2);
@@ -628,7 +632,12 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 	if (i2c_dev->is_suspended)
 		return -EBUSY;
 
-	tegra_i2c_clock_enable(i2c_dev);
+	ret = tegra_i2c_clock_enable(i2c_dev);
+	if (ret < 0) {
+		dev_err(i2c_dev->dev, "Clock enable failed %d\n", ret);
+		return ret;
+	}
+
 	for (i = 0; i < num; i++) {
 		enum msg_end_type end_type = MSG_END_STOP;
 		if (i < (num - 1)) {
diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
index f3b8f9a..966a18a 100644
--- a/drivers/i2c/muxes/i2c-mux-pca9541.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -3,7 +3,7 @@
  *
  * Copyright (c) 2010 Ericsson AB.
  *
- * Author: Guenter Roeck <guenter.roeck@ericsson.com>
+ * Author: Guenter Roeck <linux@roeck-us.net>
  *
  * Derived from:
  *  pca954x.c