diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-05-19 17:48:12 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-05-19 17:48:12 -0700 |
commit | 78975f23cba0cd195db01cdbd6eb48138a655890 (patch) | |
tree | 0e808c0cfe220bd8fb00d66985d71655345904cb /drivers/i2c/busses | |
parent | feaa7cb5c59416143432829b15826be76605b8fe (diff) | |
parent | 73e8b0528346e88a0624f2d9821f382cd6256677 (diff) | |
download | op-kernel-dev-78975f23cba0cd195db01cdbd6eb48138a655890.zip op-kernel-dev-78975f23cba0cd195db01cdbd6eb48138a655890.tar.gz |
Merge branch 'i2c/for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- Peter Rosin did some major rework on the locking of i2c muxes by
seperating parent-locked muxes and mux-locked muxes.
This avoids deadlocks/workarounds when the mux itself needs i2c
commands for muxing. And as a side-effect, other workarounds in the
media layer could be eliminated. Also, Peter stepped up as the i2c
mux maintainer and will keep an eye on these changes.
- major updates to the octeon driver
- add a helper to the core to generate the address+rw_bit octal and
make drivers use it
- quite a bunch of driver updates
* 'i2c/for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (84 commits)
i2c: rcar: add DMA support
i2c: st: Implement bus clear
i2c: only check scl functions when using generic recovery
i2c: algo-bit: declare i2c_bit_quirk_no_clk_stretch as static
i2c: tegra: disable clock before returning error
[media] rtl2832: regmap is aware of lockdep, drop local locking hack
[media] rtl2832_sdr: get rid of empty regmap wrappers
[media] rtl2832: change the i2c gate to be mux-locked
[media] si2168: change the i2c gate to be mux-locked
iio: imu: inv_mpu6050: change the i2c gate to be mux-locked
i2c: mux: document i2c muxes and elaborate on parent-/mux-locked muxes
i2c: mux: relax locking of the top i2c adapter during mux-locked muxing
i2c: muxes always lock the parent adapter
i2c: allow adapter drivers to override the adapter locking
i2c: uniphier: add "\n" at the end of error log
i2c: mv64xxx: remove CONFIG_HAVE_CLK conditionals
i2c: mv64xxx: use clk_{prepare_enable,disable_unprepare}
i2c: mv64xxx: handle probe deferral for the clock
i2c: mv64xxx: enable the driver on ARCH_MVEBU
i2c: octeon: Add workaround for broken irqs on CN3860
...
Diffstat (limited to 'drivers/i2c/busses')
30 files changed, 1366 insertions, 509 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 0967e1a..2dd40dd 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -663,7 +663,7 @@ config I2C_MT65XX config I2C_MV64XXX tristate "Marvell mv64xxx I2C Controller" - depends on MV64X60 || PLAT_ORION || ARCH_SUNXI + depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU help If you say yes to this option, support will be included for the built-in I2C interface on the Marvell 64xxx line of host bridges. diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index b9f0fff..19c8438 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -267,7 +267,7 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c, iproc_i2c->msg = msg; /* format and load slave address into the TX FIFO */ - addr = msg->addr << 1 | (msg->flags & I2C_M_RD ? 1 : 0); + addr = i2c_8bit_addr_from_msg(msg); writel(addr, iproc_i2c->base + M_TX_OFFSET); /* diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c index 2c9d9b1..ac9f476 100644 --- a/drivers/i2c/busses/i2c-bcm-kona.c +++ b/drivers/i2c/busses/i2c-bcm-kona.c @@ -501,10 +501,7 @@ static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev, return -EREMOTEIO; } } else { - addr = msg->addr << 1; - - if (msg->flags & I2C_M_RD) - addr |= 1; + addr = i2c_8bit_addr_from_msg(msg); if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0) return -EREMOTEIO; diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c index 4a45408..6a8cfc1 100644 --- a/drivers/i2c/busses/i2c-brcmstb.c +++ b/drivers/i2c/busses/i2c-brcmstb.c @@ -446,9 +446,7 @@ static int brcmstb_i2c_do_addr(struct brcmstb_i2c_dev *dev, } } else { - addr = msg->addr << 1; - if (msg->flags & I2C_M_RD) - addr |= 1; + addr = i2c_8bit_addr_from_msg(msg); bsc_writel(dev, addr, chip_address); } diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index b167ab2..ee57c1e 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -197,9 +197,7 @@ static void cpm_i2c_parse_message(struct i2c_adapter *adap, tbdf = cpm->tbase + tx; rbdf = cpm->rbase + rx; - addr = pmsg->addr << 1; - if (pmsg->flags & I2C_M_RD) - addr |= 1; + addr = i2c_8bit_addr_from_msg(pmsg); tb = cpm->txbuf[tx]; rb = cpm->rxbuf[rx]; diff --git a/drivers/i2c/busses/i2c-dln2.c b/drivers/i2c/busses/i2c-dln2.c index 1600edd..f2eb4f7 100644 --- a/drivers/i2c/busses/i2c-dln2.c +++ b/drivers/i2c/busses/i2c-dln2.c @@ -19,6 +19,7 @@ #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/mfd/dln2.h> +#include <linux/acpi.h> #define DLN2_I2C_MODULE_ID 0x03 #define DLN2_I2C_CMD(cmd) DLN2_CMD(cmd, DLN2_I2C_MODULE_ID) @@ -210,6 +211,7 @@ static int dln2_i2c_probe(struct platform_device *pdev) dln2->adapter.algo = &dln2_i2c_usb_algorithm; dln2->adapter.quirks = &dln2_i2c_quirks; dln2->adapter.dev.parent = dev; + ACPI_COMPANION_SET(&dln2->adapter.dev, ACPI_COMPANION(&pdev->dev)); dln2->adapter.dev.of_node = dev->of_node; i2c_set_adapdata(&dln2->adapter, dln2); snprintf(dln2->adapter.name, sizeof(dln2->adapter.name), "%s-%s-%d", diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index f54ece8..c0e3ada 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -861,14 +861,8 @@ static int exynos5_i2c_resume_noirq(struct device *dev) #endif static const struct dev_pm_ops exynos5_i2c_dev_pm_ops = { -#ifdef CONFIG_PM_SLEEP - .suspend_noirq = exynos5_i2c_suspend_noirq, - .resume_noirq = exynos5_i2c_resume_noirq, - .freeze_noirq = exynos5_i2c_suspend_noirq, - .thaw_noirq = exynos5_i2c_resume_noirq, - .poweroff_noirq = exynos5_i2c_suspend_noirq, - .restore_noirq = exynos5_i2c_resume_noirq, -#endif + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(exynos5_i2c_suspend_noirq, + exynos5_i2c_resume_noirq) }; static struct platform_driver exynos5_i2c_driver = { diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 585a3b7..64b1208b 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -94,6 +94,7 @@ #include <linux/err.h> #include <linux/platform_device.h> #include <linux/platform_data/itco_wdt.h> +#include <linux/pm_runtime.h> #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ defined CONFIG_DMI @@ -714,9 +715,11 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, { int hwpec; int block = 0; - int ret, xact = 0; + int ret = 0, xact = 0; struct i801_priv *priv = i2c_get_adapdata(adap); + pm_runtime_get_sync(&priv->pci_dev->dev); + hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA; @@ -773,7 +776,8 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, default: dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n", size); - return -EOPNOTSUPP; + ret = -EOPNOTSUPP; + goto out; } if (hwpec) /* enable/disable hardware PEC */ @@ -796,11 +800,11 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); if (block) - return ret; + goto out; if (ret) - return ret; + goto out; if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) - return 0; + goto out; switch (xact & 0x7f) { case I801_BYTE: /* Result put in SMBHSTDAT0 */ @@ -812,7 +816,11 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, (inb_p(SMBHSTDAT1(priv)) << 8); break; } - return 0; + +out: + pm_runtime_mark_last_busy(&priv->pci_dev->dev); + pm_runtime_put_autosuspend(&priv->pci_dev->dev); + return ret; } @@ -1413,6 +1421,11 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) pci_set_drvdata(dev, priv); + pm_runtime_set_autosuspend_delay(&dev->dev, 1000); + pm_runtime_use_autosuspend(&dev->dev); + pm_runtime_put_autosuspend(&dev->dev); + pm_runtime_allow(&dev->dev); + return 0; } @@ -1420,6 +1433,9 @@ static void i801_remove(struct pci_dev *dev) { struct i801_priv *priv = pci_get_drvdata(dev); + pm_runtime_forbid(&dev->dev); + pm_runtime_get_noresume(&dev->dev); + i801_del_mux(priv); i2c_del_adapter(&priv->adapter); pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); @@ -1433,34 +1449,32 @@ static void i801_remove(struct pci_dev *dev) } #ifdef CONFIG_PM -static int i801_suspend(struct pci_dev *dev, pm_message_t mesg) +static int i801_suspend(struct device *dev) { - struct i801_priv *priv = pci_get_drvdata(dev); + struct pci_dev *pci_dev = to_pci_dev(dev); + struct i801_priv *priv = pci_get_drvdata(pci_dev); - pci_save_state(dev); - pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); - pci_set_power_state(dev, pci_choose_state(dev, mesg)); + pci_write_config_byte(pci_dev, SMBHSTCFG, priv->original_hstcfg); return 0; } -static int i801_resume(struct pci_dev *dev) +static int i801_resume(struct device *dev) { - pci_set_power_state(dev, PCI_D0); - pci_restore_state(dev); return 0; } -#else -#define i801_suspend NULL -#define i801_resume NULL #endif +static UNIVERSAL_DEV_PM_OPS(i801_pm_ops, i801_suspend, + i801_resume, NULL); + static struct pci_driver i801_driver = { .name = "i801_smbus", .id_table = i801_ids, .probe = i801_probe, .remove = i801_remove, - .suspend = i801_suspend, - .resume = i801_resume, + .driver = { + .pm = &i801_pm_ops, + }, }; static int __init i2c_i801_init(void) diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index b6c0803..cdaa7be 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -269,7 +269,7 @@ static int iic_smbus_quick(struct ibm_iic_private* dev, const struct i2c_msg* p) ndelay(t->hd_sta); /* Send address */ - v = (u8)((p->addr << 1) | ((p->flags & I2C_M_RD) ? 1 : 0)); + v = i2c_8bit_addr_from_msg(p); for (i = 0, mask = 0x80; i < 8; ++i, mask >>= 1){ out_8(&iic->directcntl, sda); ndelay(t->low / 2); diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c index 379ef9c..ea20425b 100644 --- a/drivers/i2c/busses/i2c-img-scb.c +++ b/drivers/i2c/busses/i2c-img-scb.c @@ -751,9 +751,7 @@ static unsigned int img_i2c_atomic(struct img_i2c *i2c, switch (i2c->at_cur_cmd) { case CMD_GEN_START: next_cmd = CMD_GEN_DATA; - next_data = (i2c->msg.addr << 1); - if (i2c->msg.flags & I2C_M_RD) - next_data |= 0x1; + next_data = i2c_8bit_addr_from_msg(&i2c->msg); break; case CMD_GEN_DATA: if (i2c->line_status & LINESTAT_INPUT_HELD_V) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 1ca7ef2..1844bc9 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -525,7 +525,7 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode, i2c_imx, IMX_I2C_I2CR); /* Wait controller to be stable */ - udelay(50); + usleep_range(50, 150); /* Start I2C transaction */ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 72d6161..85cbe4b 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -50,10 +50,7 @@ iic_cook_addr(struct i2c_msg *msg) { unsigned char addr; - addr = (msg->addr << 1); - - if (msg->flags & I2C_M_RD) - addr |= 1; + addr = i2c_8bit_addr_from_msg(msg); return addr; } diff --git a/drivers/i2c/busses/i2c-lpc2k.c b/drivers/i2c/busses/i2c-lpc2k.c index 8560a13..586a152 100644 --- a/drivers/i2c/busses/i2c-lpc2k.c +++ b/drivers/i2c/busses/i2c-lpc2k.c @@ -133,9 +133,7 @@ static void i2c_lpc2k_pump_msg(struct lpc2k_i2c *i2c) case M_START: case M_REPSTART: /* Start bit was just sent out, send out addr and dir */ - data = i2c->msg->addr << 1; - if (i2c->msg->flags & I2C_M_RD) - data |= 1; + data = i2c_8bit_addr_from_msg(i2c->msg); writel(data, i2c->base + LPC24XX_I2DAT); writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR); diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 453358b..d9373e6 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -413,10 +413,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, else writew(I2C_FS_START_CON, i2c->base + OFFSET_EXT_CONF); - addr_reg = msgs->addr << 1; - if (i2c->op == I2C_MASTER_RD) - addr_reg |= 0x1; - + addr_reg = i2c_8bit_addr_from_msg(msgs); writew(addr_reg, i2c->base + OFFSET_SLAVE_ADDR); /* Clear interrupt status */ diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 43207f5..b4dec08 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -134,9 +134,7 @@ struct mv64xxx_i2c_data { int rc; u32 freq_m; u32 freq_n; -#if defined(CONFIG_HAVE_CLK) struct clk *clk; -#endif wait_queue_head_t waitq; spinlock_t lock; struct i2c_msg *msg; @@ -757,7 +755,6 @@ static const struct of_device_id mv64xxx_i2c_of_match_table[] = { MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table); #ifdef CONFIG_OF -#ifdef CONFIG_HAVE_CLK static int mv64xxx_calc_freq(struct mv64xxx_i2c_data *drv_data, const int tclk, const int n, const int m) @@ -791,25 +788,20 @@ mv64xxx_find_baud_factors(struct mv64xxx_i2c_data *drv_data, return false; return true; } -#endif /* CONFIG_HAVE_CLK */ static int mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, struct device *dev) { - /* CLK is mandatory when using DT to describe the i2c bus. We - * need to know tclk in order to calculate bus clock - * factors. - */ -#if !defined(CONFIG_HAVE_CLK) - /* Have OF but no CLK */ - return -ENODEV; -#else const struct of_device_id *device; struct device_node *np = dev->of_node; u32 bus_freq, tclk; int rc = 0; + /* CLK is mandatory when using DT to describe the i2c bus. We + * need to know tclk in order to calculate bus clock + * factors. + */ if (IS_ERR(drv_data->clk)) { rc = -ENODEV; goto out; @@ -869,7 +861,6 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, out: return rc; -#endif } #else /* CONFIG_OF */ static int @@ -907,14 +898,13 @@ mv64xxx_i2c_probe(struct platform_device *pd) init_waitqueue_head(&drv_data->waitq); spin_lock_init(&drv_data->lock); -#if defined(CONFIG_HAVE_CLK) /* Not all platforms have a clk */ drv_data->clk = devm_clk_get(&pd->dev, NULL); - if (!IS_ERR(drv_data->clk)) { - clk_prepare(drv_data->clk); - clk_enable(drv_data->clk); - } -#endif + if (IS_ERR(drv_data->clk) && PTR_ERR(drv_data->clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (!IS_ERR(drv_data->clk)) + clk_prepare_enable(drv_data->clk); + if (pdata) { drv_data->freq_m = pdata->freq_m; drv_data->freq_n = pdata->freq_n; @@ -964,13 +954,10 @@ exit_reset: if (!IS_ERR_OR_NULL(drv_data->rstc)) reset_control_assert(drv_data->rstc); exit_clk: -#if defined(CONFIG_HAVE_CLK) /* Not all platforms have a clk */ - if (!IS_ERR(drv_data->clk)) { - clk_disable(drv_data->clk); - clk_unprepare(drv_data->clk); - } -#endif + if (!IS_ERR(drv_data->clk)) + clk_disable_unprepare(drv_data->clk); + return rc; } @@ -983,13 +970,9 @@ mv64xxx_i2c_remove(struct platform_device *dev) free_irq(drv_data->irq, drv_data); if (!IS_ERR_OR_NULL(drv_data->rstc)) reset_control_assert(drv_data->rstc); -#if defined(CONFIG_HAVE_CLK) /* Not all platforms have a clk */ - if (!IS_ERR(drv_data->clk)) { - clk_disable(drv_data->clk); - clk_unprepare(drv_data->clk); - } -#endif + if (!IS_ERR(drv_data->clk)) + clk_disable_unprepare(drv_data->clk); return 0; } diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 70b3c91..42fcc94 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -127,7 +127,7 @@ static struct pci_driver nforce2_driver; /* For multiplexing support, we need a global reference to the 1st SMBus channel */ -#if defined CONFIG_I2C_NFORCE2_S4985 || defined CONFIG_I2C_NFORCE2_S4985_MODULE +#if IS_ENABLED(CONFIG_I2C_NFORCE2_S4985) struct i2c_adapter *nforce2_smbus; EXPORT_SYMBOL_GPL(nforce2_smbus); diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 11b7b87..dfa7a4b 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -178,10 +178,7 @@ static void ocores_process(struct ocores_i2c *i2c) if (i2c->nmsgs) { /* end? */ /* send start? */ if (!(msg->flags & I2C_M_NOSTART)) { - u8 addr = (msg->addr << 1); - - if (msg->flags & I2C_M_RD) - addr |= 1; + u8 addr = i2c_8bit_addr_from_msg(msg); i2c->state = STATE_START; diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c index 46fb6c4..aa5f01e 100644 --- a/drivers/i2c/busses/i2c-octeon.c +++ b/drivers/i2c/busses/i2c-octeon.c @@ -11,6 +11,7 @@ * warranty of any kind, whether express or implied. */ +#include <linux/atomic.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/kernel.h> @@ -29,13 +30,23 @@ /* Register offsets */ #define SW_TWSI 0x00 #define TWSI_INT 0x10 +#define SW_TWSI_EXT 0x18 /* Controller command patterns */ #define SW_TWSI_V BIT_ULL(63) /* Valid bit */ +#define SW_TWSI_EIA BIT_ULL(61) /* Extended internal address */ #define SW_TWSI_R BIT_ULL(56) /* Result or read bit */ +#define SW_TWSI_SOVR BIT_ULL(55) /* Size override */ +#define SW_TWSI_SIZE_SHIFT 52 +#define SW_TWSI_ADDR_SHIFT 40 +#define SW_TWSI_IA_SHIFT 32 /* Internal address */ /* Controller opcode word (bits 60:57) */ #define SW_TWSI_OP_SHIFT 57 +#define SW_TWSI_OP_7 (0ULL << SW_TWSI_OP_SHIFT) +#define SW_TWSI_OP_7_IA (1ULL << SW_TWSI_OP_SHIFT) +#define SW_TWSI_OP_10 (2ULL << SW_TWSI_OP_SHIFT) +#define SW_TWSI_OP_10_IA (3ULL << SW_TWSI_OP_SHIFT) #define SW_TWSI_OP_TWSI_CLK (4ULL << SW_TWSI_OP_SHIFT) #define SW_TWSI_OP_EOP (6ULL << SW_TWSI_OP_SHIFT) /* Extended opcode */ @@ -48,46 +59,93 @@ #define SW_TWSI_EOP_TWSI_RST (SW_TWSI_OP_EOP | 7ULL << SW_TWSI_EOP_SHIFT) /* Controller command and status bits */ -#define TWSI_CTL_CE 0x80 +#define TWSI_CTL_CE 0x80 /* High level controller enable */ #define TWSI_CTL_ENAB 0x40 /* Bus enable */ #define TWSI_CTL_STA 0x20 /* Master-mode start, HW clears when done */ #define TWSI_CTL_STP 0x10 /* Master-mode stop, HW clears when done */ #define TWSI_CTL_IFLG 0x08 /* HW event, SW writes 0 to ACK */ #define TWSI_CTL_AAK 0x04 /* Assert ACK */ -/* Some status values */ +/* Status values */ +#define STAT_ERROR 0x00 #define STAT_START 0x08 -#define STAT_RSTART 0x10 +#define STAT_REP_START 0x10 #define STAT_TXADDR_ACK 0x18 +#define STAT_TXADDR_NAK 0x20 #define STAT_TXDATA_ACK 0x28 +#define STAT_TXDATA_NAK 0x30 +#define STAT_LOST_ARB_38 0x38 #define STAT_RXADDR_ACK 0x40 +#define STAT_RXADDR_NAK 0x48 #define STAT_RXDATA_ACK 0x50 +#define STAT_RXDATA_NAK 0x58 +#define STAT_SLAVE_60 0x60 +#define STAT_LOST_ARB_68 0x68 +#define STAT_SLAVE_70 0x70 +#define STAT_LOST_ARB_78 0x78 +#define STAT_SLAVE_80 0x80 +#define STAT_SLAVE_88 0x88 +#define STAT_GENDATA_ACK 0x90 +#define STAT_GENDATA_NAK 0x98 +#define STAT_SLAVE_A0 0xA0 +#define STAT_SLAVE_A8 0xA8 +#define STAT_LOST_ARB_B0 0xB0 +#define STAT_SLAVE_LOST 0xB8 +#define STAT_SLAVE_NAK 0xC0 +#define STAT_SLAVE_ACK 0xC8 +#define STAT_AD2W_ACK 0xD0 +#define STAT_AD2W_NAK 0xD8 #define STAT_IDLE 0xF8 /* TWSI_INT values */ +#define TWSI_INT_ST_INT BIT_ULL(0) +#define TWSI_INT_TS_INT BIT_ULL(1) +#define TWSI_INT_CORE_INT BIT_ULL(2) +#define TWSI_INT_ST_EN BIT_ULL(4) +#define TWSI_INT_TS_EN BIT_ULL(5) #define TWSI_INT_CORE_EN BIT_ULL(6) #define TWSI_INT_SDA_OVR BIT_ULL(8) #define TWSI_INT_SCL_OVR BIT_ULL(9) +#define TWSI_INT_SDA BIT_ULL(10) +#define TWSI_INT_SCL BIT_ULL(11) + +#define I2C_OCTEON_EVENT_WAIT 80 /* microseconds */ struct octeon_i2c { wait_queue_head_t queue; struct i2c_adapter adap; int irq; + int hlc_irq; /* For cn7890 only */ u32 twsi_freq; int sys_freq; void __iomem *twsi_base; struct device *dev; + bool hlc_enabled; + bool broken_irq_mode; + bool broken_irq_check; + void (*int_enable)(struct octeon_i2c *); + void (*int_disable)(struct octeon_i2c *); + void (*hlc_int_enable)(struct octeon_i2c *); + void (*hlc_int_disable)(struct octeon_i2c *); + atomic_t int_enable_cnt; + atomic_t hlc_int_enable_cnt; }; +static void octeon_i2c_writeq_flush(u64 val, void __iomem *addr) +{ + __raw_writeq(val, addr); + __raw_readq(addr); /* wait for write to land */ +} + /** - * octeon_i2c_write_sw - write an I2C core register + * octeon_i2c_reg_write - write an I2C core register * @i2c: The struct octeon_i2c * @eop_reg: Register selector * @data: Value to be written * * The I2C core registers are accessed indirectly via the SW_TWSI CSR. */ -static void octeon_i2c_write_sw(struct octeon_i2c *i2c, u64 eop_reg, u8 data) +static void octeon_i2c_reg_write(struct octeon_i2c *i2c, u64 eop_reg, u8 data) { u64 tmp; @@ -97,8 +155,13 @@ static void octeon_i2c_write_sw(struct octeon_i2c *i2c, u64 eop_reg, u8 data) } while ((tmp & SW_TWSI_V) != 0); } +#define octeon_i2c_ctl_write(i2c, val) \ + octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CTL, val) +#define octeon_i2c_data_write(i2c, val) \ + octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_DATA, val) + /** - * octeon_i2c_read_sw - read lower bits of an I2C core register + * octeon_i2c_reg_read - read lower bits of an I2C core register * @i2c: The struct octeon_i2c * @eop_reg: Register selector * @@ -106,7 +169,7 @@ static void octeon_i2c_write_sw(struct octeon_i2c *i2c, u64 eop_reg, u8 data) * * The I2C core registers are accessed indirectly via the SW_TWSI CSR. */ -static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg) +static u8 octeon_i2c_reg_read(struct octeon_i2c *i2c, u64 eop_reg) { u64 tmp; @@ -118,6 +181,24 @@ static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg) return tmp & 0xFF; } +#define octeon_i2c_ctl_read(i2c) \ + octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_CTL) +#define octeon_i2c_data_read(i2c) \ + octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_DATA) +#define octeon_i2c_stat_read(i2c) \ + octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_STAT) + +/** + * octeon_i2c_read_int - read the TWSI_INT register + * @i2c: The struct octeon_i2c + * + * Returns the value of the register. + */ +static u64 octeon_i2c_read_int(struct octeon_i2c *i2c) +{ + return __raw_readq(i2c->twsi_base + TWSI_INT); +} + /** * octeon_i2c_write_int - write the TWSI_INT register * @i2c: The struct octeon_i2c @@ -125,8 +206,7 @@ static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg) */ static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data) { - __raw_writeq(data, i2c->twsi_base + TWSI_INT); - __raw_readq(i2c->twsi_base + TWSI_INT); + octeon_i2c_writeq_flush(data, i2c->twsi_base + TWSI_INT); } /** @@ -149,30 +229,96 @@ static void octeon_i2c_int_disable(struct octeon_i2c *i2c) } /** - * octeon_i2c_unblock - unblock the bus + * octeon_i2c_int_enable78 - enable the CORE interrupt * @i2c: The struct octeon_i2c * - * If there was a reset while a device was driving 0 to bus, bus is blocked. - * We toggle it free manually by some clock cycles and send a stop. + * The interrupt will be asserted when there is non-STAT_IDLE state in the + * SW_TWSI_EOP_TWSI_STAT register. */ -static void octeon_i2c_unblock(struct octeon_i2c *i2c) +static void octeon_i2c_int_enable78(struct octeon_i2c *i2c) +{ + atomic_inc_return(&i2c->int_enable_cnt); + enable_irq(i2c->irq); +} + +static void __octeon_i2c_irq_disable(atomic_t *cnt, int irq) { - int i; + int count; + + /* + * The interrupt can be disabled in two places, but we only + * want to make the disable_irq_nosync() call once, so keep + * track with the atomic variable. + */ + count = atomic_dec_if_positive(cnt); + if (count >= 0) + disable_irq_nosync(irq); +} + +/* disable the CORE interrupt */ +static void octeon_i2c_int_disable78(struct octeon_i2c *i2c) +{ + __octeon_i2c_irq_disable(&i2c->int_enable_cnt, i2c->irq); +} + +/** + * octeon_i2c_hlc_int_enable78 - enable the ST interrupt + * @i2c: The struct octeon_i2c + * + * The interrupt will be asserted when there is non-STAT_IDLE state in + * the SW_TWSI_EOP_TWSI_STAT register. + */ +static void octeon_i2c_hlc_int_enable78(struct octeon_i2c *i2c) +{ + atomic_inc_return(&i2c->hlc_int_enable_cnt); + enable_irq(i2c->hlc_irq); +} + +/* disable the ST interrupt */ +static void octeon_i2c_hlc_int_disable78(struct octeon_i2c *i2c) +{ + __octeon_i2c_irq_disable(&i2c->hlc_int_enable_cnt, i2c->hlc_irq); +} + +/* + * Cleanup low-level state & enable high-level controller. + */ +static void octeon_i2c_hlc_enable(struct octeon_i2c *i2c) +{ + int try = 0; + u64 val; + + if (i2c->hlc_enabled) + return; + i2c->hlc_enabled = true; + + while (1) { + val = octeon_i2c_ctl_read(i2c); + if (!(val & (TWSI_CTL_STA | TWSI_CTL_STP))) + break; + + /* clear IFLG event */ + if (val & TWSI_CTL_IFLG) + octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB); - dev_dbg(i2c->dev, "%s\n", __func__); + if (try++ > 100) { + pr_err("%s: giving up\n", __func__); + break; + } - for (i = 0; i < 9; i++) { - octeon_i2c_write_int(i2c, 0); - udelay(5); - octeon_i2c_write_int(i2c, TWSI_INT_SCL_OVR); - udelay(5); + /* spin until any start/stop has finished */ + udelay(10); } - /* hand-crank a STOP */ - octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR | TWSI_INT_SCL_OVR); - udelay(5); - octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR); - udelay(5); - octeon_i2c_write_int(i2c, 0); + octeon_i2c_ctl_write(i2c, TWSI_CTL_CE | TWSI_CTL_AAK | TWSI_CTL_ENAB); +} + +static void octeon_i2c_hlc_disable(struct octeon_i2c *i2c) +{ + if (!i2c->hlc_enabled) + return; + + i2c->hlc_enabled = false; + octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB); } /* interrupt service routine */ @@ -180,16 +326,44 @@ static irqreturn_t octeon_i2c_isr(int irq, void *dev_id) { struct octeon_i2c *i2c = dev_id; - octeon_i2c_int_disable(i2c); + i2c->int_disable(i2c); + wake_up(&i2c->queue); + + return IRQ_HANDLED; +} + +/* HLC interrupt service routine */ +static irqreturn_t octeon_i2c_hlc_isr78(int irq, void *dev_id) +{ + struct octeon_i2c *i2c = dev_id; + + i2c->hlc_int_disable(i2c); wake_up(&i2c->queue); return IRQ_HANDLED; } +static bool octeon_i2c_test_iflg(struct octeon_i2c *i2c) +{ + return (octeon_i2c_ctl_read(i2c) & TWSI_CTL_IFLG); +} -static int octeon_i2c_test_iflg(struct octeon_i2c *i2c) +static bool octeon_i2c_test_ready(struct octeon_i2c *i2c, bool *first) { - return (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_CTL) & TWSI_CTL_IFLG) != 0; + if (octeon_i2c_test_iflg(i2c)) + return true; + + if (*first) { + *first = false; + return false; + } + + /* + * IRQ has signaled an event but IFLG hasn't changed. + * Sleep and retry once. + */ + usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT); + return octeon_i2c_test_iflg(i2c); } /** @@ -201,64 +375,493 @@ static int octeon_i2c_test_iflg(struct octeon_i2c *i2c) static int octeon_i2c_wait(struct octeon_i2c *i2c) { long time_left; + bool first = 1; - octeon_i2c_int_enable(i2c); - time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_iflg(i2c), + /* + * Some chip revisions don't assert the irq in the interrupt + * controller. So we must poll for the IFLG change. + */ + if (i2c->broken_irq_mode) { + u64 end = get_jiffies_64() + i2c->adap.timeout; + + while (!octeon_i2c_test_iflg(i2c) && + time_before64(get_jiffies_64(), end)) + usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT); + + return octeon_i2c_test_iflg(i2c) ? 0 : -ETIMEDOUT; + } + + i2c->int_enable(i2c); + time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_ready(i2c, &first), i2c->adap.timeout); - octeon_i2c_int_disable(i2c); - if (!time_left) { - dev_dbg(i2c->dev, "%s: timeout\n", __func__); - return -ETIMEDOUT; + i2c->int_disable(i2c); + + if (i2c->broken_irq_check && !time_left && + octeon_i2c_test_iflg(i2c)) { + dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n"); + i2c->broken_irq_mode = true; + return 0; } + if (!time_left) + return -ETIMEDOUT; + return 0; } +static int octeon_i2c_check_status(struct octeon_i2c *i2c, int final_read) +{ + u8 stat = octeon_i2c_stat_read(i2c); + + switch (stat) { + /* Everything is fine */ + case STAT_IDLE: + case STAT_AD2W_ACK: + case STAT_RXADDR_ACK: + case STAT_TXADDR_ACK: + case STAT_TXDATA_ACK: + return 0; + + /* ACK allowed on pre-terminal bytes only */ + case STAT_RXDATA_ACK: + if (!final_read) + return 0; + return -EIO; + + /* NAK allowed on terminal byte only */ + case STAT_RXDATA_NAK: + if (final_read) + return 0; + return -EIO; + + /* Arbitration lost */ + case STAT_LOST_ARB_38: + case STAT_LOST_ARB_68: + case STAT_LOST_ARB_78: + case STAT_LOST_ARB_B0: + return -EAGAIN; + + /* Being addressed as slave, should back off & listen */ + case STAT_SLAVE_60: + case STAT_SLAVE_70: + case STAT_GENDATA_ACK: + case STAT_GENDATA_NAK: + return -EOPNOTSUPP; + + /* Core busy as slave */ + case STAT_SLAVE_80: + case STAT_SLAVE_88: + case STAT_SLAVE_A0: + case STAT_SLAVE_A8: + case STAT_SLAVE_LOST: + case STAT_SLAVE_NAK: + case STAT_SLAVE_ACK: + return -EOPNOTSUPP; + + case STAT_TXDATA_NAK: + return -EIO; + case STAT_TXADDR_NAK: + case STAT_RXADDR_NAK: + case STAT_AD2W_NAK: + return -ENXIO; + default: + dev_err(i2c->dev, "unhandled state: %d\n", stat); + return -EIO; + } +} + +static bool octeon_i2c_hlc_test_valid(struct octeon_i2c *i2c) +{ + return (__raw_readq(i2c->twsi_base + SW_TWSI) & SW_TWSI_V) == 0; +} + +static bool octeon_i2c_hlc_test_ready(struct octeon_i2c *i2c, bool *first) +{ + /* check if valid bit is cleared */ + if (octeon_i2c_hlc_test_valid(i2c)) + return true; + + if (*first) { + *first = false; + return false; + } + + /* + * IRQ has signaled an event but valid bit isn't cleared. + * Sleep and retry once. + */ + usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT); + return octeon_i2c_hlc_test_valid(i2c); +} + +static void octeon_i2c_hlc_int_enable(struct octeon_i2c *i2c) +{ + octeon_i2c_write_int(i2c, TWSI_INT_ST_EN); +} + +static void octeon_i2c_hlc_int_clear(struct octeon_i2c *i2c) +{ + /* clear ST/TS events, listen for neither */ + octeon_i2c_write_int(i2c, TWSI_INT_ST_INT | TWSI_INT_TS_INT); +} + /** - * octeon_i2c_start - send START to the bus + * octeon_i2c_hlc_wait - wait for an HLC operation to complete * @i2c: The struct octeon_i2c * - * Returns 0 on success, otherwise a negative errno. + * Returns 0 on success, otherwise -ETIMEDOUT. */ -static int octeon_i2c_start(struct octeon_i2c *i2c) +static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c) { - int result; - u8 data; + bool first = 1; + int time_left; - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, - TWSI_CTL_ENAB | TWSI_CTL_STA); + /* + * Some cn38xx boards don't assert the irq in the interrupt + * controller. So we must poll for the valid bit change. + */ + if (i2c->broken_irq_mode) { + u64 end = get_jiffies_64() + i2c->adap.timeout; - result = octeon_i2c_wait(i2c); - if (result) { - if (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT) == STAT_IDLE) { + while (!octeon_i2c_hlc_test_valid(i2c) && + time_before64(get_jiffies_64(), end)) + usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT); + + return octeon_i2c_hlc_test_valid(i2c) ? 0 : -ETIMEDOUT; + } + + i2c->hlc_int_enable(i2c); + time_left = wait_event_timeout(i2c->queue, + octeon_i2c_hlc_test_ready(i2c, &first), + i2c->adap.timeout); + i2c->hlc_int_disable(i2c); + if (!time_left) + octeon_i2c_hlc_int_clear(i2c); + + if (i2c->broken_irq_check && !time_left && + octeon_i2c_hlc_test_valid(i2c)) { + dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n"); + i2c->broken_irq_mode = true; + return 0; + } + + if (!time_left) + return -ETIMEDOUT; + return 0; +} + +/* high-level-controller pure read of up to 8 bytes */ +static int octeon_i2c_hlc_read(struct octeon_i2c *i2c, struct i2c_msg *msgs) +{ + int i, j, ret = 0; + u64 cmd; + + octeon_i2c_hlc_enable(i2c); + octeon_i2c_hlc_int_clear(i2c); + + cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR; + /* SIZE */ + cmd |= (u64)(msgs[0].len - 1) << SW_TWSI_SIZE_SHIFT; + /* A */ + cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT; + + if (msgs[0].flags & I2C_M_TEN) + cmd |= SW_TWSI_OP_10; + else + cmd |= SW_TWSI_OP_7; + + octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI); + ret = octeon_i2c_hlc_wait(i2c); + if (ret) + goto err; + + cmd = __raw_readq(i2c->twsi_base + SW_TWSI); + if ((cmd & SW_TWSI_R) == 0) + return -EAGAIN; + + for (i = 0, j = msgs[0].len - 1; i < msgs[0].len && i < 4; i++, j--) + msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff; + + if (msgs[0].len > 4) { + cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT); + for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--) + msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff; + } + +err: + return ret; +} + +/* high-level-controller pure write of up to 8 bytes */ +static int octeon_i2c_hlc_write(struct octeon_i2c *i2c, struct i2c_msg *msgs) +{ + int i, j, ret = 0; + u64 cmd; + + octeon_i2c_hlc_enable(i2c); + octeon_i2c_hlc_int_clear(i2c); + + cmd = SW_TWSI_V | SW_TWSI_SOVR; + /* SIZE */ + cmd |= (u64)(msgs[0].len - 1) << SW_TWSI_SIZE_SHIFT; + /* A */ + cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT; + + if (msgs[0].flags & I2C_M_TEN) + cmd |= SW_TWSI_OP_10; + else + cmd |= SW_TWSI_OP_7; + + for (i = 0, j = msgs[0].len - 1; i < msgs[0].len && i < 4; i++, j--) + cmd |= (u64)msgs[0].buf[j] << (8 * i); + + if (msgs[0].len > 4) { + u64 ext = 0; + + for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--) + ext |= (u64)msgs[0].buf[j] << (8 * i); + octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT); + } + + octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI); + ret = octeon_i2c_hlc_wait(i2c); + if (ret) + goto err; + + cmd = __raw_readq(i2c->twsi_base + SW_TWSI); + if ((cmd & SW_TWSI_R) == 0) + return -EAGAIN; + + ret = octeon_i2c_check_status(i2c, false); + +err: + return ret; +} + +/* high-level-controller composite write+read, msg0=addr, msg1=data */ +static int octeon_i2c_hlc_comp_read(struct octeon_i2c *i2c, struct i2c_msg *msgs) +{ + int i, j, ret = 0; + u64 cmd; + + octeon_i2c_hlc_enable(i2c); + + cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR; + /* SIZE */ + cmd |= (u64)(msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT; + /* A */ + cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT; + + if (msgs[0].flags & I2C_M_TEN) + cmd |= SW_TWSI_OP_10_IA; + else + cmd |= SW_TWSI_OP_7_IA; + + if (msgs[0].len == 2) { + u64 ext = 0; + + cmd |= SW_TWSI_EIA; + ext = (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT; + cmd |= (u64)msgs[0].buf[1] << SW_TWSI_IA_SHIFT; + octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT); + } else { + cmd |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT; + } + + octeon_i2c_hlc_int_clear(i2c); + octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI); + + ret = octeon_i2c_hlc_wait(i2c); + if (ret) + goto err; + + cmd = __raw_readq(i2c->twsi_base + SW_TWSI); + if ((cmd & SW_TWSI_R) == 0) + return -EAGAIN; + + for (i = 0, j = msgs[1].len - 1; i < msgs[1].len && i < 4; i++, j--) + msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff; + + if (msgs[1].len > 4) { + cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT); + for (i = 0; i < msgs[1].len - 4 && i < 4; i++, j--) + msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff; + } + +err: + return ret; +} + +/* high-level-controller composite write+write, m[0]len<=2, m[1]len<=8 */ +static int octeon_i2c_hlc_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msgs) +{ + bool set_ext = false; + int i, j, ret = 0; + u64 cmd, ext = 0; + + octeon_i2c_hlc_enable(i2c); + + cmd = SW_TWSI_V | SW_TWSI_SOVR; + /* SIZE */ + cmd |= (u64)(msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT; + /* A */ + cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT; + + if (msgs[0].flags & I2C_M_TEN) + cmd |= SW_TWSI_OP_10_IA; + else + cmd |= SW_TWSI_OP_7_IA; + + if (msgs[0].len == 2) { + cmd |= SW_TWSI_EIA; + ext |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT; + set_ext = true; + cmd |= (u64)msgs[0].buf[1] << SW_TWSI_IA_SHIFT; + } else { + cmd |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT; + } + + for (i = 0, j = msgs[1].len - 1; i < msgs[1].len && i < 4; i++, j--) + cmd |= (u64)msgs[1].buf[j] << (8 * i); + + if (msgs[1].len > 4) { + for (i = 0; i < msgs[1].len - 4 && i < 4; i++, j--) + ext |= (u64)msgs[1].buf[j] << (8 * i); + set_ext = true; + } + if (set_ext) + octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT); + + octeon_i2c_hlc_int_clear(i2c); + octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI); + + ret = octeon_i2c_hlc_wait(i2c); + if (ret) + goto err; + + cmd = __raw_readq(i2c->twsi_base + SW_TWSI); + if ((cmd & SW_TWSI_R) == 0) + return -EAGAIN; + + ret = octeon_i2c_check_status(i2c, false); + +err: + return ret; +} + +/* calculate and set clock divisors */ +static void octeon_i2c_set_clock(struct octeon_i2c *i2c) +{ + int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff; + int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000; + + for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) { + /* + * An mdiv value of less than 2 seems to not work well + * with ds1337 RTCs, so we constrain it to larger values. + */ + for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) { /* - * Controller refused to send start flag May - * be a client is holding SDA low - let's try - * to free it. + * For given ndiv and mdiv values check the + * two closest thp values. */ - octeon_i2c_unblock(i2c); - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, - TWSI_CTL_ENAB | TWSI_CTL_STA); - result = octeon_i2c_wait(i2c); + tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10; + tclk *= (1 << ndiv_idx); + thp_base = (i2c->sys_freq / (tclk * 2)) - 1; + + for (inc = 0; inc <= 1; inc++) { + thp_idx = thp_base + inc; + if (thp_idx < 5 || thp_idx > 0xff) + continue; + + foscl = i2c->sys_freq / (2 * (thp_idx + 1)); + foscl = foscl / (1 << ndiv_idx); + foscl = foscl / (mdiv_idx + 1) / 10; + diff = abs(foscl - i2c->twsi_freq); + if (diff < delta_hz) { + delta_hz = diff; + thp = thp_idx; + mdiv = mdiv_idx; + ndiv = ndiv_idx; + } + } } - if (result) - return result; } + octeon_i2c_reg_write(i2c, SW_TWSI_OP_TWSI_CLK, thp); + octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv); +} + +static int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c) +{ + u8 status = 0; + int tries; + + /* reset controller */ + octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_RST, 0); - data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); - if ((data != STAT_START) && (data != STAT_RSTART)) { - dev_err(i2c->dev, "%s: bad status (0x%x)\n", __func__, data); + for (tries = 10; tries && status != STAT_IDLE; tries--) { + udelay(1); + status = octeon_i2c_stat_read(i2c); + if (status == STAT_IDLE) + break; + } + + if (status != STAT_IDLE) { + dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", + __func__, status); return -EIO; } + /* toggle twice to force both teardowns */ + octeon_i2c_hlc_enable(i2c); + octeon_i2c_hlc_disable(i2c); return 0; } +static int octeon_i2c_recovery(struct octeon_i2c *i2c) +{ + int ret; + + ret = i2c_recover_bus(&i2c->adap); + if (ret) + /* recover failed, try hardware re-init */ + ret = octeon_i2c_init_lowlevel(i2c); + return ret; +} + +/** + * octeon_i2c_start - send START to the bus + * @i2c: The struct octeon_i2c + * + * Returns 0 on success, otherwise a negative errno. + */ +static int octeon_i2c_start(struct octeon_i2c *i2c) +{ + int ret; + u8 stat; + + octeon_i2c_hlc_disable(i2c); + + octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STA); + ret = octeon_i2c_wait(i2c); + if (ret) + goto error; + + stat = octeon_i2c_stat_read(i2c); + if (stat == STAT_START || stat == STAT_REP_START) + /* START successful, bail out */ + return 0; + +error: + /* START failed, try to recover */ + ret = octeon_i2c_recovery(i2c); + return (ret) ? ret : -EAGAIN; +} + /* send STOP to the bus */ static void octeon_i2c_stop(struct octeon_i2c *i2c) { - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, - TWSI_CTL_ENAB | TWSI_CTL_STP); + octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STP); } /** @@ -276,31 +879,21 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target, const u8 *data, int length) { int i, result; - u8 tmp; - - result = octeon_i2c_start(i2c); - if (result) - return result; - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, target << 1); - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); + octeon_i2c_data_write(i2c, target << 1); + octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB); result = octeon_i2c_wait(i2c); if (result) return result; for (i = 0; i < length; i++) { - tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); - - if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) { - dev_err(i2c->dev, - "%s: bad status before write (0x%x)\n", - __func__, tmp); - return -EIO; - } + result = octeon_i2c_check_status(i2c, false); + if (result) + return result; - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, data[i]); - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); + octeon_i2c_data_write(i2c, data[i]); + octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB); result = octeon_i2c_wait(i2c); if (result) @@ -326,44 +919,36 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, u8 *data, u16 *rlength, bool recv_len) { int i, result, length = *rlength; - u8 tmp; + bool final_read = false; - if (length < 1) - return -EINVAL; + octeon_i2c_data_write(i2c, (target << 1) | 1); + octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB); - result = octeon_i2c_start(i2c); + result = octeon_i2c_wait(i2c); if (result) return result; - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target << 1) | 1); - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); - - result = octeon_i2c_wait(i2c); + /* address OK ? */ + result = octeon_i2c_check_status(i2c, false); if (result) return result; for (i = 0; i < length; i++) { - tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); + /* for the last byte TWSI_CTL_AAK must not be set */ + if (i + 1 == length) + final_read = true; - if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) { - dev_err(i2c->dev, - "%s: bad status before read (0x%x)\n", - __func__, tmp); - return -EIO; - } - - if (i + 1 < length) - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, - TWSI_CTL_ENAB | TWSI_CTL_AAK); + /* clear iflg to allow next event */ + if (final_read) + octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB); else - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, - TWSI_CTL_ENAB); + octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_AAK); result = octeon_i2c_wait(i2c); if (result) return result; - data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA); + data[i] = octeon_i2c_data_read(i2c); if (recv_len && i == 0) { if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) { dev_err(i2c->dev, @@ -373,6 +958,10 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, } length += data[i]; } + + result = octeon_i2c_check_status(i2c, final_read); + if (result) + return result; } *rlength = length; return 0; @@ -392,13 +981,41 @@ static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, struct octeon_i2c *i2c = i2c_get_adapdata(adap); int i, ret = 0; + if (num == 1) { + if (msgs[0].len > 0 && msgs[0].len <= 8) { + if (msgs[0].flags & I2C_M_RD) + ret = octeon_i2c_hlc_read(i2c, msgs); + else + ret = octeon_i2c_hlc_write(i2c, msgs); + goto out; + } + } else if (num == 2) { + if ((msgs[0].flags & I2C_M_RD) == 0 && + (msgs[1].flags & I2C_M_RECV_LEN) == 0 && + msgs[0].len > 0 && msgs[0].len <= 2 && + msgs[1].len > 0 && msgs[1].len <= 8 && + msgs[0].addr == msgs[1].addr) { + if (msgs[1].flags & I2C_M_RD) + ret = octeon_i2c_hlc_comp_read(i2c, msgs); + else + ret = octeon_i2c_hlc_comp_write(i2c, msgs); + goto out; + } + } + for (i = 0; ret == 0 && i < num; i++) { struct i2c_msg *pmsg = &msgs[i]; - dev_dbg(i2c->dev, - "Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n", - pmsg->flags & I2C_M_RD ? "read" : "write", - pmsg->len, pmsg->addr, i + 1, num); + /* zero-length messages are not supported */ + if (!pmsg->len) { + ret = -EOPNOTSUPP; + break; + } + + ret = octeon_i2c_start(i2c); + if (ret) + return ret; + if (pmsg->flags & I2C_M_RD) ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf, &pmsg->len, pmsg->flags & I2C_M_RECV_LEN); @@ -407,102 +1024,105 @@ static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, pmsg->len); } octeon_i2c_stop(i2c); - +out: return (ret != 0) ? ret : num; } -static u32 octeon_i2c_functionality(struct i2c_adapter *adap) +static int octeon_i2c_get_scl(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | - I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL; + struct octeon_i2c *i2c = i2c_get_adapdata(adap); + u64 state; + + state = octeon_i2c_read_int(i2c); + return state & TWSI_INT_SCL; } -static const struct i2c_algorithm octeon_i2c_algo = { - .master_xfer = octeon_i2c_xfer, - .functionality = octeon_i2c_functionality, -}; +static void octeon_i2c_set_scl(struct i2c_adapter *adap, int val) +{ + struct octeon_i2c *i2c = i2c_get_adapdata(adap); -static struct i2c_adapter octeon_i2c_ops = { - .owner = THIS_MODULE, - .name = "OCTEON adapter", - .algo = &octeon_i2c_algo, - .timeout = HZ / 50, -}; + octeon_i2c_write_int(i2c, TWSI_INT_SCL_OVR); +} -/* calculate and set clock divisors */ -static void octeon_i2c_set_clock(struct octeon_i2c *i2c) +static int octeon_i2c_get_sda(struct i2c_adapter *adap) { - int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff; - int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000; + struct octeon_i2c *i2c = i2c_get_adapdata(adap); + u64 state; - for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) { - /* - * An mdiv value of less than 2 seems to not work well - * with ds1337 RTCs, so we constrain it to larger values. - */ - for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) { - /* - * For given ndiv and mdiv values check the - * two closest thp values. - */ - tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10; - tclk *= (1 << ndiv_idx); - thp_base = (i2c->sys_freq / (tclk * 2)) - 1; + state = octeon_i2c_read_int(i2c); + return state & TWSI_INT_SDA; +} - for (inc = 0; inc <= 1; inc++) { - thp_idx = thp_base + inc; - if (thp_idx < 5 || thp_idx > 0xff) - continue; +static void octeon_i2c_prepare_recovery(struct i2c_adapter *adap) +{ + struct octeon_i2c *i2c = i2c_get_adapdata(adap); - foscl = i2c->sys_freq / (2 * (thp_idx + 1)); - foscl = foscl / (1 << ndiv_idx); - foscl = foscl / (mdiv_idx + 1) / 10; - diff = abs(foscl - i2c->twsi_freq); - if (diff < delta_hz) { - delta_hz = diff; - thp = thp_idx; - mdiv = mdiv_idx; - ndiv = ndiv_idx; - } - } - } - } - octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp); - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv); + /* + * The stop resets the state machine, does not _transmit_ STOP unless + * engine was active. + */ + octeon_i2c_stop(i2c); + + octeon_i2c_hlc_disable(i2c); + octeon_i2c_write_int(i2c, 0); } -static int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c) +static void octeon_i2c_unprepare_recovery(struct i2c_adapter *adap) { - u8 status; - int tries; + struct octeon_i2c *i2c = i2c_get_adapdata(adap); - /* disable high level controller, enable bus access */ - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); + octeon_i2c_write_int(i2c, 0); +} - /* reset controller */ - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0); +static struct i2c_bus_recovery_info octeon_i2c_recovery_info = { + .recover_bus = i2c_generic_scl_recovery, + .get_scl = octeon_i2c_get_scl, + .set_scl = octeon_i2c_set_scl, + .get_sda = octeon_i2c_get_sda, + .prepare_recovery = octeon_i2c_prepare_recovery, + .unprepare_recovery = octeon_i2c_unprepare_recovery, +}; - for (tries = 10; tries; tries--) { - udelay(1); - status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); - if (status == STAT_IDLE) - return 0; - } - dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status); - return -EIO; +static u32 octeon_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL; } +static const struct i2c_algorithm octeon_i2c_algo = { + .master_xfer = octeon_i2c_xfer, + .functionality = octeon_i2c_functionality, +}; + +static struct i2c_adapter octeon_i2c_ops = { + .owner = THIS_MODULE, + .name = "OCTEON adapter", + .algo = &octeon_i2c_algo, +}; + static int octeon_i2c_probe(struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; + int irq, result = 0, hlc_irq = 0; struct resource *res_mem; struct octeon_i2c *i2c; - int irq, result = 0; - - /* All adaptors have an irq. */ - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; + bool cn78xx_style; + + cn78xx_style = of_device_is_compatible(node, "cavium,octeon-7890-twsi"); + if (cn78xx_style) { + hlc_irq = platform_get_irq(pdev, 0); + if (hlc_irq < 0) + return hlc_irq; + + irq = platform_get_irq(pdev, 2); + if (irq < 0) + return irq; + } else { + /* All adaptors have an irq. */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + } i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); if (!i2c) { @@ -537,6 +1157,31 @@ static int octeon_i2c_probe(struct platform_device *pdev) i2c->irq = irq; + if (cn78xx_style) { + i2c->hlc_irq = hlc_irq; + + i2c->int_enable = octeon_i2c_int_enable78; + i2c->int_disable = octeon_i2c_int_disable78; + i2c->hlc_int_enable = octeon_i2c_hlc_int_enable78; + i2c->hlc_int_disable = octeon_i2c_hlc_int_disable78; + + irq_set_status_flags(i2c->irq, IRQ_NOAUTOEN); + irq_set_status_flags(i2c->hlc_irq, IRQ_NOAUTOEN); + + result = devm_request_irq(&pdev->dev, i2c->hlc_irq, + octeon_i2c_hlc_isr78, 0, + DRV_NAME, i2c); + if (result < 0) { + dev_err(i2c->dev, "failed to attach interrupt\n"); + goto out; + } + } else { + i2c->int_enable = octeon_i2c_int_enable; + i2c->int_disable = octeon_i2c_int_disable; + i2c->hlc_int_enable = octeon_i2c_hlc_int_enable; + i2c->hlc_int_disable = octeon_i2c_int_disable; + } + result = devm_request_irq(&pdev->dev, i2c->irq, octeon_i2c_isr, 0, DRV_NAME, i2c); if (result < 0) { @@ -544,6 +1189,9 @@ static int octeon_i2c_probe(struct platform_device *pdev) goto out; } + if (OCTEON_IS_MODEL(OCTEON_CN38XX)) + i2c->broken_irq_check = true; + result = octeon_i2c_init_lowlevel(i2c); if (result) { dev_err(i2c->dev, "init low level failed\n"); @@ -553,6 +1201,9 @@ static int octeon_i2c_probe(struct platform_device *pdev) octeon_i2c_set_clock(i2c); i2c->adap = octeon_i2c_ops; + i2c->adap.timeout = msecs_to_jiffies(2); + i2c->adap.retries = 5; + i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info; i2c->adap.dev.parent = &pdev->dev; i2c->adap.dev.of_node = node; i2c_set_adapdata(&i2c->adap, i2c); @@ -580,6 +1231,7 @@ static int octeon_i2c_remove(struct platform_device *pdev) static const struct of_device_id octeon_i2c_match[] = { { .compatible = "cavium,octeon-3860-twsi", }, + { .compatible = "cavium,octeon-7890-twsi", }, {}, }; MODULE_DEVICE_TABLE(of, octeon_i2c_match); diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 13c4529..ab1279b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -185,7 +185,6 @@ enum { #define OMAP_I2C_IP_V2_INTERRUPTS_MASK 0x6FFF struct omap_i2c_dev { - spinlock_t lock; /* IRQ synchronization */ struct device *dev; void __iomem *base; /* virtual */ int irq; @@ -995,15 +994,12 @@ omap_i2c_isr(int irq, void *dev_id) u16 mask; u16 stat; - spin_lock(&omap->lock); - mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG); stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); + mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG); if (stat & mask) ret = IRQ_WAKE_THREAD; - spin_unlock(&omap->lock); - return ret; } @@ -1011,12 +1007,10 @@ static irqreturn_t omap_i2c_isr_thread(int this_irq, void *dev_id) { struct omap_i2c_dev *omap = dev_id; - unsigned long flags; u16 bits; u16 stat; int err = 0, count = 0; - spin_lock_irqsave(&omap->lock, flags); do { bits = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG); stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); @@ -1142,8 +1136,6 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) omap_i2c_complete_cmd(omap, err); out: - spin_unlock_irqrestore(&omap->lock, flags); - return IRQ_HANDLED; } @@ -1330,8 +1322,6 @@ omap_i2c_probe(struct platform_device *pdev) omap->dev = &pdev->dev; omap->irq = irq; - spin_lock_init(&omap->lock); - platform_set_drvdata(pdev, omap); init_completion(&omap->cmd_complete); diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 6abcf69..b0d9dee 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -150,13 +150,11 @@ static int i2c_powermac_master_xfer( struct i2c_adapter *adap, { struct pmac_i2c_bus *bus = i2c_get_adapdata(adap); int rc = 0; - int read; int addrdir; if (msgs->flags & I2C_M_TEN) return -EINVAL; - read = (msgs->flags & I2C_M_RD) != 0; - addrdir = (msgs->addr << 1) | read; + addrdir = i2c_8bit_addr_from_msg(msgs); rc = pmac_i2c_open(bus, 0); if (rc) { diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 23eaabb..cc6439a 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -515,7 +515,7 @@ static int qup_i2c_get_data_len(struct qup_i2c_dev *qup) static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup, struct i2c_msg *msg, int is_dma) { - u16 addr = (msg->addr << 1) | ((msg->flags & I2C_M_RD) == I2C_M_RD); + u16 addr = i2c_8bit_addr_from_msg(msg); int len = 0; int data_len; diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 68ecb56..9aca1b4 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -21,6 +21,8 @@ */ #include <linux/clk.h> #include <linux/delay.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -43,6 +45,8 @@ #define ICSAR 0x1C /* slave address */ #define ICMAR 0x20 /* master address */ #define ICRXTX 0x24 /* data port */ +#define ICDMAER 0x3c /* DMA enable */ +#define ICFBSCR 0x38 /* first bit setup cycle */ /* ICSCR */ #define SDBS (1 << 3) /* slave data buffer select */ @@ -78,6 +82,16 @@ #define MDR (1 << 1) #define MAT (1 << 0) /* slave addr xfer done */ +/* ICDMAER */ +#define RSDMAE (1 << 3) /* DMA Slave Received Enable */ +#define TSDMAE (1 << 2) /* DMA Slave Transmitted Enable */ +#define RMDMAE (1 << 1) /* DMA Master Received Enable */ +#define TMDMAE (1 << 0) /* DMA Master Transmitted Enable */ + +/* ICFBSCR */ +#define TCYC06 0x04 /* 6*Tcyc delay 1st bit between SDA and SCL */ +#define TCYC17 0x0f /* 17*Tcyc delay 1st bit between SDA and SCL */ + #define RCAR_BUS_PHASE_START (MDBS | MIE | ESG) #define RCAR_BUS_PHASE_DATA (MDBS | MIE) @@ -120,6 +134,12 @@ struct rcar_i2c_priv { u32 flags; enum rcar_i2c_type devtype; struct i2c_client *slave; + + struct resource *res; + struct dma_chan *dma_tx; + struct dma_chan *dma_rx; + struct scatterlist sg; + enum dma_data_direction dma_direction; }; #define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent) @@ -287,6 +307,118 @@ static void rcar_i2c_next_msg(struct rcar_i2c_priv *priv) /* * interrupt functions */ +static void rcar_i2c_dma_unmap(struct rcar_i2c_priv *priv) +{ + struct dma_chan *chan = priv->dma_direction == DMA_FROM_DEVICE + ? priv->dma_rx : priv->dma_tx; + + /* Disable DMA Master Received/Transmitted */ + rcar_i2c_write(priv, ICDMAER, 0); + + /* Reset default delay */ + rcar_i2c_write(priv, ICFBSCR, TCYC06); + + dma_unmap_single(chan->device->dev, sg_dma_address(&priv->sg), + priv->msg->len, priv->dma_direction); + + priv->dma_direction = DMA_NONE; +} + +static void rcar_i2c_cleanup_dma(struct rcar_i2c_priv *priv) +{ + if (priv->dma_direction == DMA_NONE) + return; + else if (priv->dma_direction == DMA_FROM_DEVICE) + dmaengine_terminate_all(priv->dma_rx); + else if (priv->dma_direction == DMA_TO_DEVICE) + dmaengine_terminate_all(priv->dma_tx); + + rcar_i2c_dma_unmap(priv); +} + +static void rcar_i2c_dma_callback(void *data) +{ + struct rcar_i2c_priv *priv = data; + + priv->pos += sg_dma_len(&priv->sg); + + rcar_i2c_dma_unmap(priv); +} + +static void rcar_i2c_dma(struct rcar_i2c_priv *priv) +{ + struct device *dev = rcar_i2c_priv_to_dev(priv); + struct i2c_msg *msg = priv->msg; + bool read = msg->flags & I2C_M_RD; + enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + struct dma_chan *chan = read ? priv->dma_rx : priv->dma_tx; + struct dma_async_tx_descriptor *txdesc; + dma_addr_t dma_addr; + dma_cookie_t cookie; + unsigned char *buf; + int len; + + /* Do not use DMA if it's not available or for messages < 8 bytes */ + if (IS_ERR(chan) || msg->len < 8) + return; + + if (read) { + /* + * The last two bytes needs to be fetched using PIO in + * order for the STOP phase to work. + */ + buf = priv->msg->buf; + len = priv->msg->len - 2; + } else { + /* + * First byte in message was sent using PIO. + */ + buf = priv->msg->buf + 1; + len = priv->msg->len - 1; + } + + dma_addr = dma_map_single(chan->device->dev, buf, len, dir); + if (dma_mapping_error(dev, dma_addr)) { + dev_dbg(dev, "dma map failed, using PIO\n"); + return; + } + + sg_dma_len(&priv->sg) = len; + sg_dma_address(&priv->sg) = dma_addr; + + priv->dma_direction = dir; + + txdesc = dmaengine_prep_slave_sg(chan, &priv->sg, 1, + read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!txdesc) { + dev_dbg(dev, "dma prep slave sg failed, using PIO\n"); + rcar_i2c_cleanup_dma(priv); + return; + } + + txdesc->callback = rcar_i2c_dma_callback; + txdesc->callback_param = priv; + + cookie = dmaengine_submit(txdesc); + if (dma_submit_error(cookie)) { + dev_dbg(dev, "submitting dma failed, using PIO\n"); + rcar_i2c_cleanup_dma(priv); + return; + } + + /* Set delay for DMA operations */ + rcar_i2c_write(priv, ICFBSCR, TCYC17); + + /* Enable DMA Master Received/Transmitted */ + if (read) + rcar_i2c_write(priv, ICDMAER, RMDMAE); + else + rcar_i2c_write(priv, ICDMAER, TMDMAE); + + dma_async_issue_pending(chan); +} + static void rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr) { struct i2c_msg *msg = priv->msg; @@ -306,6 +438,12 @@ static void rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr) rcar_i2c_write(priv, ICRXTX, msg->buf[priv->pos]); priv->pos++; + /* + * Try to use DMA to transmit the rest of the data if + * address transfer pashe just finished. + */ + if (msr & MAT) + rcar_i2c_dma(priv); } else { /* * The last data was pushed to ICRXTX on _PREV_ empty irq. @@ -340,7 +478,11 @@ static void rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr) return; if (msr & MAT) { - /* Address transfer phase finished, but no data at this point. */ + /* + * Address transfer phase finished, but no data at this point. + * Try to use DMA to receive data. + */ + rcar_i2c_dma(priv); } else if (priv->pos < msg->len) { /* get received data */ msg->buf[priv->pos] = rcar_i2c_read(priv, ICRXTX); @@ -472,6 +614,81 @@ out: return IRQ_HANDLED; } +static struct dma_chan *rcar_i2c_request_dma_chan(struct device *dev, + enum dma_transfer_direction dir, + dma_addr_t port_addr) +{ + struct dma_chan *chan; + struct dma_slave_config cfg; + char *chan_name = dir == DMA_MEM_TO_DEV ? "tx" : "rx"; + int ret; + + chan = dma_request_slave_channel_reason(dev, chan_name); + if (IS_ERR(chan)) { + ret = PTR_ERR(chan); + dev_dbg(dev, "request_channel failed for %s (%d)\n", + chan_name, ret); + return chan; + } + + memset(&cfg, 0, sizeof(cfg)); + cfg.direction = dir; + if (dir == DMA_MEM_TO_DEV) { + cfg.dst_addr = port_addr; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } else { + cfg.src_addr = port_addr; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } + + ret = dmaengine_slave_config(chan, &cfg); + if (ret) { + dev_dbg(dev, "slave_config failed for %s (%d)\n", + chan_name, ret); + dma_release_channel(chan); + return ERR_PTR(ret); + } + + dev_dbg(dev, "got DMA channel for %s\n", chan_name); + return chan; +} + +static void rcar_i2c_request_dma(struct rcar_i2c_priv *priv, + struct i2c_msg *msg) +{ + struct device *dev = rcar_i2c_priv_to_dev(priv); + bool read; + struct dma_chan *chan; + enum dma_transfer_direction dir; + + read = msg->flags & I2C_M_RD; + + chan = read ? priv->dma_rx : priv->dma_tx; + if (PTR_ERR(chan) != -EPROBE_DEFER) + return; + + dir = read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV; + chan = rcar_i2c_request_dma_chan(dev, dir, priv->res->start + ICRXTX); + + if (read) + priv->dma_rx = chan; + else + priv->dma_tx = chan; +} + +static void rcar_i2c_release_dma(struct rcar_i2c_priv *priv) +{ + if (!IS_ERR(priv->dma_tx)) { + dma_release_channel(priv->dma_tx); + priv->dma_tx = ERR_PTR(-EPROBE_DEFER); + } + + if (!IS_ERR(priv->dma_rx)) { + dma_release_channel(priv->dma_rx); + priv->dma_rx = ERR_PTR(-EPROBE_DEFER); + } +} + static int rcar_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) @@ -493,6 +710,7 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, ret = -EOPNOTSUPP; goto out; } + rcar_i2c_request_dma(priv, msgs + i); } /* init first message */ @@ -504,6 +722,7 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, time_left = wait_event_timeout(priv->wait, priv->flags & ID_DONE, num * adap->timeout); if (!time_left) { + rcar_i2c_cleanup_dma(priv); rcar_i2c_init(priv); ret = -ETIMEDOUT; } else if (priv->flags & ID_NACK) { @@ -591,7 +810,6 @@ static int rcar_i2c_probe(struct platform_device *pdev) { struct rcar_i2c_priv *priv; struct i2c_adapter *adap; - struct resource *res; struct device *dev = &pdev->dev; struct i2c_timings i2c_t; int irq, ret; @@ -606,8 +824,9 @@ static int rcar_i2c_probe(struct platform_device *pdev) return PTR_ERR(priv->clk); } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->io = devm_ioremap_resource(dev, res); + priv->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + priv->io = devm_ioremap_resource(dev, priv->res); if (IS_ERR(priv->io)) return PTR_ERR(priv->io); @@ -626,6 +845,11 @@ static int rcar_i2c_probe(struct platform_device *pdev) i2c_parse_fw_timings(dev, &i2c_t, false); + /* Init DMA */ + sg_init_table(&priv->sg, 1); + priv->dma_direction = DMA_NONE; + priv->dma_rx = priv->dma_tx = ERR_PTR(-EPROBE_DEFER); + pm_runtime_enable(dev); pm_runtime_get_sync(dev); ret = rcar_i2c_clock_calculate(priv, &i2c_t); @@ -673,6 +897,7 @@ static int rcar_i2c_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; i2c_del_adapter(&priv->adap); + rcar_i2c_release_dma(priv); if (priv->flags & ID_P_PM_BLOCKED) pm_runtime_put(dev); pm_runtime_disable(dev); diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 3dcc5f3..80bed02 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -101,10 +101,7 @@ struct rk3x_i2c { struct notifier_block clk_rate_nb; /* Settings */ - unsigned int scl_frequency; - unsigned int scl_rise_ns; - unsigned int scl_fall_ns; - unsigned int sda_fall_ns; + struct i2c_timings t; /* Synchronization & notification */ spinlock_t lock; @@ -437,10 +434,7 @@ out: * Calculate divider values for desired SCL frequency * * @clk_rate: I2C input clock rate - * @scl_rate: Desired SCL rate - * @scl_rise_ns: How many ns it takes for SCL to rise. - * @scl_fall_ns: How many ns it takes for SCL to fall. - * @sda_fall_ns: How many ns it takes for SDA to fall. + * @t: Known I2C timing information. * @div_low: Divider output for low * @div_high: Divider output for high * @@ -448,11 +442,10 @@ out: * a best-effort divider value is returned in divs. If the target rate is * too high, we silently use the highest possible rate. */ -static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate, - unsigned long scl_rise_ns, - unsigned long scl_fall_ns, - unsigned long sda_fall_ns, - unsigned long *div_low, unsigned long *div_high) +static int rk3x_i2c_calc_divs(unsigned long clk_rate, + struct i2c_timings *t, + unsigned long *div_low, + unsigned long *div_high) { unsigned long spec_min_low_ns, spec_min_high_ns; unsigned long spec_setup_start, spec_max_data_hold_ns; @@ -472,12 +465,12 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate, int ret = 0; /* Only support standard-mode and fast-mode */ - if (WARN_ON(scl_rate > 400000)) - scl_rate = 400000; + if (WARN_ON(t->bus_freq_hz > 400000)) + t->bus_freq_hz = 400000; /* prevent scl_rate_khz from becoming 0 */ - if (WARN_ON(scl_rate < 1000)) - scl_rate = 1000; + if (WARN_ON(t->bus_freq_hz < 1000)) + t->bus_freq_hz = 1000; /* * min_low_ns: The minimum number of ns we need to hold low to @@ -491,7 +484,7 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate, * This is because the i2c host on Rockchip holds the data line * for half the low time. */ - if (scl_rate <= 100000) { + if (t->bus_freq_hz <= 100000) { /* Standard-mode */ spec_min_low_ns = 4700; spec_setup_start = 4700; @@ -506,7 +499,7 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate, spec_max_data_hold_ns = 900; data_hold_buffer_ns = 50; } - min_high_ns = scl_rise_ns + spec_min_high_ns; + min_high_ns = t->scl_rise_ns + spec_min_high_ns; /* * Timings for repeated start: @@ -517,18 +510,18 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate, * we meet tSU;STA and tHD;STA times. */ min_high_ns = max(min_high_ns, - DIV_ROUND_UP((scl_rise_ns + spec_setup_start) * 1000, 875)); + DIV_ROUND_UP((t->scl_rise_ns + spec_setup_start) * 1000, 875)); min_high_ns = max(min_high_ns, - DIV_ROUND_UP((scl_rise_ns + spec_setup_start + - sda_fall_ns + spec_min_high_ns), 2)); + DIV_ROUND_UP((t->scl_rise_ns + spec_setup_start + + t->sda_fall_ns + spec_min_high_ns), 2)); - min_low_ns = scl_fall_ns + spec_min_low_ns; + min_low_ns = t->scl_fall_ns + spec_min_low_ns; max_low_ns = spec_max_data_hold_ns * 2 - data_hold_buffer_ns; min_total_ns = min_low_ns + min_high_ns; /* Adjust to avoid overflow */ clk_rate_khz = DIV_ROUND_UP(clk_rate, 1000); - scl_rate_khz = scl_rate / 1000; + scl_rate_khz = t->bus_freq_hz / 1000; /* * We need the total div to be >= this number @@ -616,14 +609,13 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate, static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate) { + struct i2c_timings *t = &i2c->t; unsigned long div_low, div_high; u64 t_low_ns, t_high_ns; int ret; - ret = rk3x_i2c_calc_divs(clk_rate, i2c->scl_frequency, i2c->scl_rise_ns, - i2c->scl_fall_ns, i2c->sda_fall_ns, - &div_low, &div_high); - WARN_ONCE(ret != 0, "Could not reach SCL freq %u", i2c->scl_frequency); + ret = rk3x_i2c_calc_divs(clk_rate, t, &div_low, &div_high); + WARN_ONCE(ret != 0, "Could not reach SCL freq %u", t->bus_freq_hz); clk_enable(i2c->clk); i2c_writel(i2c, (div_high << 16) | (div_low & 0xffff), REG_CLKDIV); @@ -634,7 +626,7 @@ static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate) dev_dbg(i2c->dev, "CLK %lukhz, Req %uns, Act low %lluns high %lluns\n", clk_rate / 1000, - 1000000000 / i2c->scl_frequency, + 1000000000 / t->bus_freq_hz, t_low_ns, t_high_ns); } @@ -664,9 +656,7 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long switch (event) { case PRE_RATE_CHANGE: - if (rk3x_i2c_calc_divs(ndata->new_rate, i2c->scl_frequency, - i2c->scl_rise_ns, i2c->scl_fall_ns, - i2c->sda_fall_ns, + if (rk3x_i2c_calc_divs(ndata->new_rate, &i2c->t, &div_low, &div_high) != 0) return NOTIFY_STOP; @@ -880,37 +870,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev) match = of_match_node(rk3x_i2c_match, np); i2c->soc_data = (struct rk3x_i2c_soc_data *)match->data; - if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", - &i2c->scl_frequency)) { - dev_info(&pdev->dev, "using default SCL frequency: %d\n", - DEFAULT_SCL_RATE); - i2c->scl_frequency = DEFAULT_SCL_RATE; - } - - if (i2c->scl_frequency == 0 || i2c->scl_frequency > 400 * 1000) { - dev_warn(&pdev->dev, "invalid SCL frequency specified.\n"); - dev_warn(&pdev->dev, "using default SCL frequency: %d\n", - DEFAULT_SCL_RATE); - i2c->scl_frequency = DEFAULT_SCL_RATE; - } - - /* - * Read rise and fall time from device tree. If not available use - * the default maximum timing from the specification. - */ - if (of_property_read_u32(pdev->dev.of_node, "i2c-scl-rising-time-ns", - &i2c->scl_rise_ns)) { - if (i2c->scl_frequency <= 100000) - i2c->scl_rise_ns = 1000; - else - i2c->scl_rise_ns = 300; - } - if (of_property_read_u32(pdev->dev.of_node, "i2c-scl-falling-time-ns", - &i2c->scl_fall_ns)) - i2c->scl_fall_ns = 300; - if (of_property_read_u32(pdev->dev.of_node, "i2c-sda-falling-time-ns", - &i2c->sda_fall_ns)) - i2c->sda_fall_ns = i2c->scl_fall_ns; + /* use common interface to get I2C timing properties */ + i2c_parse_fw_timings(&pdev->dev, &i2c->t, true); strlcpy(i2c->adap.name, "rk3x-i2c", sizeof(i2c->adap.name)); i2c->adap.owner = THIS_MODULE; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 362a6de5..38dc1ca 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -163,15 +163,14 @@ static const struct of_device_id s3c24xx_i2c_match[] = { MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match); #endif -/* s3c24xx_get_device_quirks - * +/* * Get controller type either from device tree or platform device variant. -*/ - + */ static inline kernel_ulong_t s3c24xx_get_device_quirks(struct platform_device *pdev) { if (pdev->dev.of_node) { const struct of_device_id *match; + match = of_match_node(s3c24xx_i2c_match, pdev->dev.of_node); return (kernel_ulong_t)match->data; } @@ -179,12 +178,10 @@ static inline kernel_ulong_t s3c24xx_get_device_quirks(struct platform_device *p return platform_get_device_id(pdev)->driver_data; } -/* s3c24xx_i2c_master_complete - * - * complete the message and wake up the caller, using the given return code, +/* + * Complete the message and wake up the caller, using the given return code, * or zero to mean ok. -*/ - + */ static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret) { dev_dbg(i2c->dev, "master_complete %d\n", ret); @@ -217,7 +214,6 @@ static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c) } /* irq enable/disable functions */ - static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c) { unsigned long tmp; @@ -251,11 +247,9 @@ static bool is_ack(struct s3c24xx_i2c *i2c) return false; } -/* s3c24xx_i2c_message_start - * +/* * put the start of a message onto the bus -*/ - + */ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, struct i2c_msg *msg) { @@ -284,9 +278,10 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr); writeb(addr, i2c->regs + S3C2410_IICDS); - /* delay here to ensure the data byte has gotten onto the bus - * before the transaction is started */ - + /* + * delay here to ensure the data byte has gotten onto the bus + * before the transaction is started + */ ndelay(i2c->tx_setup); dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon); @@ -361,50 +356,46 @@ static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret) s3c24xx_i2c_disable_irq(i2c); } -/* helper functions to determine the current state in the set of - * messages we are sending */ +/* + * helper functions to determine the current state in the set of + * messages we are sending + */ -/* is_lastmsg() - * +/* * returns TRUE if the current message is the last in the set -*/ - + */ static inline int is_lastmsg(struct s3c24xx_i2c *i2c) { return i2c->msg_idx >= (i2c->msg_num - 1); } -/* is_msglast - * +/* * returns TRUE if we this is the last byte in the current message -*/ - + */ static inline int is_msglast(struct s3c24xx_i2c *i2c) { - /* msg->len is always 1 for the first byte of smbus block read. + /* + * msg->len is always 1 for the first byte of smbus block read. * Actual length will be read from slave. More bytes will be - * read according to the length then. */ + * read according to the length then. + */ if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1) return 0; return i2c->msg_ptr == i2c->msg->len-1; } -/* is_msgend - * +/* * returns TRUE if we reached the end of the current message -*/ - + */ static inline int is_msgend(struct s3c24xx_i2c *i2c) { return i2c->msg_ptr >= i2c->msg->len; } -/* i2c_s3c_irq_nextbyte - * +/* * process an interrupt and work out what to do */ - static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) { unsigned long tmp; @@ -423,14 +414,13 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) goto out_ack; case STATE_START: - /* last thing we did was send a start condition on the + /* + * last thing we did was send a start condition on the * bus, or started a new i2c message */ - if (iicstat & S3C2410_IICSTAT_LASTBIT && !(i2c->msg->flags & I2C_M_IGNORE_NAK)) { /* ack was not received... */ - dev_dbg(i2c->dev, "ack was not received\n"); s3c24xx_i2c_stop(i2c, -ENXIO); goto out_ack; @@ -441,9 +431,10 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) else i2c->state = STATE_WRITE; - /* terminate the transfer if there is nothing to do - * as this is used by the i2c probe to find devices. */ - + /* + * Terminate the transfer if there is nothing to do + * as this is used by the i2c probe to find devices. + */ if (is_lastmsg(i2c) && i2c->msg->len == 0) { s3c24xx_i2c_stop(i2c, 0); goto out_ack; @@ -452,14 +443,16 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) if (i2c->state == STATE_READ) goto prepare_read; - /* fall through to the write state, as we will need to - * send a byte as well */ + /* + * fall through to the write state, as we will need to + * send a byte as well + */ case STATE_WRITE: - /* we are writing data to the device... check for the + /* + * we are writing data to the device... check for the * end of the message, and if so, work out what to do */ - if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) { if (iicstat & S3C2410_IICSTAT_LASTBIT) { dev_dbg(i2c->dev, "WRITE: No Ack\n"); @@ -475,12 +468,13 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) byte = i2c->msg->buf[i2c->msg_ptr++]; writeb(byte, i2c->regs + S3C2410_IICDS); - /* delay after writing the byte to allow the + /* + * delay after writing the byte to allow the * data setup time on the bus, as writing the * data to the register causes the first bit * to appear on SDA, and SCL will change as - * soon as the interrupt is acknowledged */ - + * soon as the interrupt is acknowledged + */ ndelay(i2c->tx_setup); } else if (!is_lastmsg(i2c)) { @@ -496,10 +490,11 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) if (i2c->msg->flags & I2C_M_NOSTART) { if (i2c->msg->flags & I2C_M_RD) { - /* cannot do this, the controller + /* + * cannot do this, the controller * forces us to send a new START - * when we change direction */ - + * when we change direction + */ s3c24xx_i2c_stop(i2c, -EINVAL); } @@ -512,17 +507,16 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) } else { /* send stop */ - s3c24xx_i2c_stop(i2c, 0); } break; case STATE_READ: - /* we have a byte of data in the data register, do + /* + * we have a byte of data in the data register, do * something with it, and then work out whether we are * going to do any more read/write */ - byte = readb(i2c->regs + S3C2410_IICDS); i2c->msg->buf[i2c->msg_ptr++] = byte; @@ -537,9 +531,10 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) s3c24xx_i2c_disable_ack(i2c); } else if (is_msgend(i2c)) { - /* ok, we've read the entire buffer, see if there - * is anything else we need to do */ - + /* + * ok, we've read the entire buffer, see if there + * is anything else we need to do + */ if (is_lastmsg(i2c)) { /* last message, send stop and complete */ dev_dbg(i2c->dev, "READ: Send Stop\n"); @@ -568,11 +563,9 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) return ret; } -/* s3c24xx_i2c_irq - * +/* * top level IRQ servicing routine -*/ - + */ static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id) { struct s3c24xx_i2c *i2c = dev_id; @@ -595,9 +588,10 @@ static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id) goto out; } - /* pretty much this leaves us with the fact that we've - * transmitted or received whatever byte we last sent */ - + /* + * pretty much this leaves us with the fact that we've + * transmitted or received whatever byte we last sent + */ i2c_s3c_irq_nextbyte(i2c, status); out: @@ -630,11 +624,9 @@ static inline void s3c24xx_i2c_disable_bus(struct s3c24xx_i2c *i2c) } -/* s3c24xx_i2c_set_master - * +/* * get the i2c bus for a master transaction -*/ - + */ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c) { unsigned long iicstat; @@ -652,11 +644,9 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c) return -ETIMEDOUT; } -/* s3c24xx_i2c_wait_idle - * +/* * wait for the i2c bus to become idle. -*/ - + */ static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c) { unsigned long iicstat; @@ -706,11 +696,9 @@ static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c) dev_warn(i2c->dev, "timeout waiting for bus idle\n"); } -/* s3c24xx_i2c_doxfer - * +/* * this starts an i2c transfer -*/ - + */ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int num) { @@ -749,9 +737,10 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, ret = i2c->msg_idx; - /* having these next two as dev_err() makes life very - * noisy when doing an i2cdetect */ - + /* + * Having these next two as dev_err() makes life very + * noisy when doing an i2cdetect + */ if (timeout == 0) dev_dbg(i2c->dev, "timeout\n"); else if (ret != num) @@ -771,12 +760,10 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, return ret; } -/* s3c24xx_i2c_xfer - * +/* * first port of call from the i2c bus code when an message needs * transferring across the i2c bus. -*/ - + */ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) { @@ -814,17 +801,14 @@ static u32 s3c24xx_i2c_func(struct i2c_adapter *adap) } /* i2c bus registration info */ - static const struct i2c_algorithm s3c24xx_i2c_algorithm = { .master_xfer = s3c24xx_i2c_xfer, .functionality = s3c24xx_i2c_func, }; -/* s3c24xx_i2c_calcdivisor - * +/* * return the divisor settings for a given frequency -*/ - + */ static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted, unsigned int *div1, unsigned int *divs) { @@ -850,13 +834,11 @@ static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted, return clkin / (calc_divs * calc_div1); } -/* s3c24xx_i2c_clockrate - * +/* * work out a divisor for the user requested frequency setting, * either by the requested frequency, or scanning the acceptable * range of frequencies until something is found -*/ - + */ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got) { struct s3c2410_platform_i2c *pdata = i2c->pdata; @@ -944,7 +926,7 @@ static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb, i2c_unlock_adapter(&i2c->adap); if (ret < 0) - dev_err(i2c->dev, "cannot find frequency\n"); + dev_err(i2c->dev, "cannot find frequency (%d)\n", ret); else dev_info(i2c->dev, "setting freq %d\n", got); } @@ -995,7 +977,8 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c) ret = gpio_request(gpio, "i2c-bus"); if (ret) { - dev_err(i2c->dev, "gpio [%d] request failed\n", gpio); + dev_err(i2c->dev, "gpio [%d] request failed (%d)\n", + gpio, ret); goto free_gpio; } } @@ -1028,11 +1011,9 @@ static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c) } #endif -/* s3c24xx_i2c_init - * +/* * initialise the controller, set the IO lines and frequency -*/ - + */ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) { struct s3c2410_platform_i2c *pdata; @@ -1068,11 +1049,9 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) } #ifdef CONFIG_OF -/* s3c24xx_i2c_parse_dt - * +/* * Parse the device tree node and retreive the platform data. -*/ - + */ static void s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c) { @@ -1105,17 +1084,9 @@ s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c) } #else static void -s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c) -{ - return; -} +s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c) { } #endif -/* s3c24xx_i2c_probe - * - * called by the bus driver when a suitable device is found -*/ - static int s3c24xx_i2c_probe(struct platform_device *pdev) { struct s3c24xx_i2c *i2c; @@ -1156,7 +1127,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) init_waitqueue_head(&i2c->wait); /* find the clock and enable it */ - i2c->dev = &pdev->dev; i2c->clk = devm_clk_get(&pdev->dev, "i2c"); if (IS_ERR(i2c->clk)) { @@ -1166,9 +1136,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk); - /* map the registers */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); i2c->regs = devm_ioremap_resource(&pdev->dev, res); @@ -1179,33 +1147,35 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) i2c->regs, res); /* setup info block for the i2c core */ - i2c->adap.algo_data = i2c; i2c->adap.dev.parent = &pdev->dev; - i2c->pctrl = devm_pinctrl_get_select_default(i2c->dev); /* inititalise the i2c gpio lines */ - - if (i2c->pdata->cfg_gpio) { + if (i2c->pdata->cfg_gpio) i2c->pdata->cfg_gpio(to_platform_device(i2c->dev)); - } else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c)) { + else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c)) return -EINVAL; - } /* initialise the i2c controller */ + ret = clk_prepare_enable(i2c->clk); + if (ret) { + dev_err(&pdev->dev, "I2C clock enable failed\n"); + return ret; + } - clk_prepare_enable(i2c->clk); ret = s3c24xx_i2c_init(i2c); clk_disable(i2c->clk); if (ret != 0) { dev_err(&pdev->dev, "I2C controller init failed\n"); + clk_unprepare(i2c->clk); return ret; } - /* find the IRQ for this unit (note, this relies on the init call to + + /* + * find the IRQ for this unit (note, this relies on the init call to * ensure no current IRQs pending */ - if (!(i2c->quirks & QUIRK_POLL)) { i2c->irq = ret = platform_get_irq(pdev, 0); if (ret <= 0) { @@ -1214,9 +1184,8 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) return ret; } - ret = devm_request_irq(&pdev->dev, i2c->irq, s3c24xx_i2c_irq, 0, - dev_name(&pdev->dev), i2c); - + ret = devm_request_irq(&pdev->dev, i2c->irq, s3c24xx_i2c_irq, + 0, dev_name(&pdev->dev), i2c); if (ret != 0) { dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq); clk_unprepare(i2c->clk); @@ -1231,12 +1200,12 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) return ret; } - /* Note, previous versions of the driver used i2c_add_adapter() + /* + * Note, previous versions of the driver used i2c_add_adapter() * to add the bus at any number. We now pass the bus number via * the platform data, so if unset it will now default to always * being bus 0. */ - i2c->adap.nr = i2c->pdata->bus_num; i2c->adap.dev.of_node = pdev->dev.of_node; @@ -1257,11 +1226,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) return 0; } -/* s3c24xx_i2c_remove - * - * called when device is removed from the bus -*/ - static int s3c24xx_i2c_remove(struct platform_device *pdev) { struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev); @@ -1316,14 +1280,8 @@ static int s3c24xx_i2c_resume_noirq(struct device *dev) #ifdef CONFIG_PM static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = { -#ifdef CONFIG_PM_SLEEP - .suspend_noirq = s3c24xx_i2c_suspend_noirq, - .resume_noirq = s3c24xx_i2c_resume_noirq, - .freeze_noirq = s3c24xx_i2c_suspend_noirq, - .thaw_noirq = s3c24xx_i2c_resume_noirq, - .poweroff_noirq = s3c24xx_i2c_suspend_noirq, - .restore_noirq = s3c24xx_i2c_resume_noirq, -#endif + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(s3c24xx_i2c_suspend_noirq, + s3c24xx_i2c_resume_noirq) }; #define S3C24XX_DEV_PM_OPS (&s3c24xx_i2c_dev_pm_ops) @@ -1331,8 +1289,6 @@ static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = { #define S3C24XX_DEV_PM_OPS NULL #endif -/* device driver for platform bus bits */ - static struct platform_driver s3c24xx_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 7d2bd3e..6fb3e26 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -398,8 +398,7 @@ static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd, { switch (pd->pos) { case -1: - *buf = (pd->msg->addr & 0x7f) << 1; - *buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0; + *buf = i2c_8bit_addr_from_msg(pd->msg); break; default: *buf = pd->msg->buf[pd->pos]; diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c index 13e51ef..792a42b 100644 --- a/drivers/i2c/busses/i2c-sirf.c +++ b/drivers/i2c/busses/i2c-sirf.c @@ -190,9 +190,7 @@ static void i2c_sirfsoc_set_address(struct sirfsoc_i2c *siic, writel(regval, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); - addr = msg->addr << 1; /* Generate address */ - if (msg->flags & I2C_M_RD) - addr |= 1; + addr = i2c_8bit_addr_from_msg(msg); /* Reverse direction bit */ if (msg->flags & I2C_M_REV_DIR_ADDR) diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c index 6ee7715..944ec420 100644 --- a/drivers/i2c/busses/i2c-st.c +++ b/drivers/i2c/busses/i2c-st.c @@ -337,10 +337,42 @@ static void st_i2c_hw_config(struct st_i2c_dev *i2c_dev) writel_relaxed(val, i2c_dev->base + SSC_NOISE_SUPP_WIDTH_DATAOUT); } +static int st_i2c_recover_bus(struct i2c_adapter *i2c_adap) +{ + struct st_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap); + u32 ctl; + + dev_dbg(i2c_dev->dev, "Trying to recover bus\n"); + + /* + * SSP IP is dual role SPI/I2C to generate 9 clock pulses + * we switch to SPI node, 9 bit words and write a 0. This + * has been validate with a oscilloscope and is easier + * than switching to GPIO mode. + */ + + /* Disable interrupts */ + writel_relaxed(0, i2c_dev->base + SSC_IEN); + + st_i2c_hw_config(i2c_dev); + + ctl = SSC_CTL_EN | SSC_CTL_MS | SSC_CTL_EN_RX_FIFO | SSC_CTL_EN_TX_FIFO; + st_i2c_set_bits(i2c_dev->base + SSC_CTL, ctl); + + st_i2c_clr_bits(i2c_dev->base + SSC_I2C, SSC_I2C_I2CM); + usleep_range(8000, 10000); + + writel_relaxed(0, i2c_dev->base + SSC_TBUF); + usleep_range(2000, 4000); + st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_I2CM); + + return 0; +} + static int st_i2c_wait_free_bus(struct st_i2c_dev *i2c_dev) { u32 sta; - int i; + int i, ret; for (i = 0; i < 10; i++) { sta = readl_relaxed(i2c_dev->base + SSC_STA); @@ -352,6 +384,12 @@ static int st_i2c_wait_free_bus(struct st_i2c_dev *i2c_dev) dev_err(i2c_dev->dev, "bus not free (status = 0x%08x)\n", sta); + ret = i2c_recover_bus(&i2c_dev->adap); + if (ret) { + dev_err(i2c_dev->dev, "Failed to recover the bus (%d)\n", ret); + return ret; + } + return -EBUSY; } @@ -614,8 +652,7 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg, unsigned long timeout; int ret; - c->addr = (u8)(msg->addr << 1); - c->addr |= (msg->flags & I2C_M_RD); + c->addr = i2c_8bit_addr_from_msg(msg); c->buf = msg->buf; c->count = msg->len; c->xfered = 0; @@ -744,6 +781,10 @@ static struct i2c_algorithm st_i2c_algo = { .functionality = st_i2c_func, }; +static struct i2c_bus_recovery_info st_i2c_recovery_info = { + .recover_bus = st_i2c_recover_bus, +}; + static int st_i2c_of_get_deglitch(struct device_node *np, struct st_i2c_dev *i2c_dev) { @@ -826,6 +867,7 @@ static int st_i2c_probe(struct platform_device *pdev) adap->timeout = 2 * HZ; adap->retries = 0; adap->algo = &st_i2c_algo; + adap->bus_recovery_info = &st_i2c_recovery_info; adap->dev.parent = &pdev->dev; adap->dev.of_node = pdev->dev.of_node; diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 929185a..445398c3 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -38,6 +38,7 @@ #define I2C_CNFG_DEBOUNCE_CNT_SHIFT 12 #define I2C_CNFG_PACKET_MODE_EN (1<<10) #define I2C_CNFG_NEW_MASTER_FSM (1<<11) +#define I2C_CNFG_MULTI_MASTER_MODE (1<<17) #define I2C_STATUS 0x01C #define I2C_SL_CNFG 0x020 #define I2C_SL_CNFG_NACK (1<<1) @@ -106,6 +107,9 @@ #define I2C_SLV_CONFIG_LOAD (1 << 1) #define I2C_TIMEOUT_CONFIG_LOAD (1 << 2) +#define I2C_CLKEN_OVERRIDE 0x090 +#define I2C_MST_CORE_CLKEN_OVR (1 << 0) + /* * msg_end_type: The bus control which need to be send at end of transfer. * @MSG_END_STOP: Send stop pulse at end of transfer. @@ -143,6 +147,8 @@ struct tegra_i2c_hw_feature { int clk_divisor_hs_mode; int clk_divisor_std_fast_mode; u16 clk_divisor_fast_plus_mode; + bool has_multi_master_mode; + bool has_slcg_override_reg; }; /** @@ -184,6 +190,7 @@ struct tegra_i2c_dev { u32 bus_clk_rate; u16 clk_divisor_non_hs_mode; bool is_suspended; + bool is_multimaster_mode; }; static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned long reg) @@ -438,6 +445,10 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN | (0x2 << I2C_CNFG_DEBOUNCE_CNT_SHIFT); + + if (i2c_dev->hw->has_multi_master_mode) + val |= I2C_CNFG_MULTI_MASTER_MODE; + i2c_writel(i2c_dev, val, I2C_CNFG); i2c_writel(i2c_dev, 0, I2C_INT_MASK); @@ -463,25 +474,29 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) if (tegra_i2c_flush_fifos(i2c_dev)) err = -ETIMEDOUT; + if (i2c_dev->is_multimaster_mode && i2c_dev->hw->has_slcg_override_reg) + i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE); + if (i2c_dev->hw->has_config_load_reg) { i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD); while (i2c_readl(i2c_dev, I2C_CONFIG_LOAD) != 0) { if (time_after(jiffies, timeout)) { dev_warn(i2c_dev->dev, "timeout waiting for config load\n"); - return -ETIMEDOUT; + err = -ETIMEDOUT; + goto err; } msleep(1); } } - tegra_i2c_clock_disable(i2c_dev); - if (i2c_dev->irq_disabled) { i2c_dev->irq_disabled = 0; enable_irq(i2c_dev->irq); } +err: + tegra_i2c_clock_disable(i2c_dev); return err; } @@ -688,6 +703,20 @@ static u32 tegra_i2c_func(struct i2c_adapter *adap) return ret; } +static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev) +{ + struct device_node *np = i2c_dev->dev->of_node; + int ret; + + ret = of_property_read_u32(np, "clock-frequency", + &i2c_dev->bus_clk_rate); + if (ret) + i2c_dev->bus_clk_rate = 100000; /* default clock rate */ + + i2c_dev->is_multimaster_mode = of_property_read_bool(np, + "multi-master"); +} + static const struct i2c_algorithm tegra_i2c_algo = { .master_xfer = tegra_i2c_xfer, .functionality = tegra_i2c_func, @@ -707,6 +736,8 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = { .clk_divisor_std_fast_mode = 0, .clk_divisor_fast_plus_mode = 0, .has_config_load_reg = false, + .has_multi_master_mode = false, + .has_slcg_override_reg = false, }; static const struct tegra_i2c_hw_feature tegra30_i2c_hw = { @@ -717,6 +748,8 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = { .clk_divisor_std_fast_mode = 0, .clk_divisor_fast_plus_mode = 0, .has_config_load_reg = false, + .has_multi_master_mode = false, + .has_slcg_override_reg = false, }; static const struct tegra_i2c_hw_feature tegra114_i2c_hw = { @@ -727,6 +760,8 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = { .clk_divisor_std_fast_mode = 0x19, .clk_divisor_fast_plus_mode = 0x10, .has_config_load_reg = false, + .has_multi_master_mode = false, + .has_slcg_override_reg = false, }; static const struct tegra_i2c_hw_feature tegra124_i2c_hw = { @@ -737,10 +772,25 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = { .clk_divisor_std_fast_mode = 0x19, .clk_divisor_fast_plus_mode = 0x10, .has_config_load_reg = true, + .has_multi_master_mode = false, + .has_slcg_override_reg = true, +}; + +static const struct tegra_i2c_hw_feature tegra210_i2c_hw = { + .has_continue_xfer_support = true, + .has_per_pkt_xfer_complete_irq = true, + .has_single_clk_source = true, + .clk_divisor_hs_mode = 1, + .clk_divisor_std_fast_mode = 0x19, + .clk_divisor_fast_plus_mode = 0x10, + .has_config_load_reg = true, + .has_multi_master_mode = true, + .has_slcg_override_reg = true, }; /* Match table for of_platform binding */ static const struct of_device_id tegra_i2c_of_match[] = { + { .compatible = "nvidia,tegra210-i2c", .data = &tegra210_i2c_hw, }, { .compatible = "nvidia,tegra124-i2c", .data = &tegra124_i2c_hw, }, { .compatible = "nvidia,tegra114-i2c", .data = &tegra114_i2c_hw, }, { .compatible = "nvidia,tegra30-i2c", .data = &tegra30_i2c_hw, }, @@ -797,10 +847,7 @@ static int tegra_i2c_probe(struct platform_device *pdev) return PTR_ERR(i2c_dev->rst); } - ret = of_property_read_u32(i2c_dev->dev->of_node, "clock-frequency", - &i2c_dev->bus_clk_rate); - if (ret) - i2c_dev->bus_clk_rate = 100000; /* default clock rate */ + tegra_i2c_parse_dt(i2c_dev); i2c_dev->hw = &tegra20_i2c_hw; @@ -853,6 +900,15 @@ static int tegra_i2c_probe(struct platform_device *pdev) goto unprepare_fast_clk; } + if (i2c_dev->is_multimaster_mode) { + ret = clk_enable(i2c_dev->div_clk); + if (ret < 0) { + dev_err(i2c_dev->dev, "div_clk enable failed %d\n", + ret); + goto unprepare_div_clk; + } + } + ret = tegra_i2c_init(i2c_dev); if (ret) { dev_err(&pdev->dev, "Failed to initialize i2c controller"); @@ -863,7 +919,7 @@ static int tegra_i2c_probe(struct platform_device *pdev) tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev); if (ret) { dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq); - goto unprepare_div_clk; + goto disable_div_clk; } i2c_set_adapdata(&i2c_dev->adapter, i2c_dev); @@ -878,11 +934,15 @@ static int tegra_i2c_probe(struct platform_device *pdev) ret = i2c_add_numbered_adapter(&i2c_dev->adapter); if (ret) { dev_err(&pdev->dev, "Failed to add I2C adapter\n"); - goto unprepare_div_clk; + goto disable_div_clk; } return 0; +disable_div_clk: + if (i2c_dev->is_multimaster_mode) + clk_disable(i2c_dev->div_clk); + unprepare_div_clk: clk_unprepare(i2c_dev->div_clk); @@ -898,6 +958,9 @@ static int tegra_i2c_remove(struct platform_device *pdev) struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev); i2c_del_adapter(&i2c_dev->adapter); + if (i2c_dev->is_multimaster_mode) + clk_disable(i2c_dev->div_clk); + clk_unprepare(i2c_dev->div_clk); if (!i2c_dev->hw->has_single_clk_source) clk_unprepare(i2c_dev->fast_clk); diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c index 213ba55..aeead0d 100644 --- a/drivers/i2c/busses/i2c-uniphier-f.c +++ b/drivers/i2c/busses/i2c-uniphier-f.c @@ -524,7 +524,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { - dev_err(dev, "failed to get IRQ number"); + dev_err(dev, "failed to get IRQ number\n"); return irq; } diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c index 89eaa8a..475a5eb 100644 --- a/drivers/i2c/busses/i2c-uniphier.c +++ b/drivers/i2c/busses/i2c-uniphier.c @@ -381,7 +381,7 @@ static int uniphier_i2c_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { - dev_err(dev, "failed to get IRQ number"); + dev_err(dev, "failed to get IRQ number\n"); return irq; } |