diff options
author | Max Schwarz <max.schwarz@online.de> | 2014-11-20 10:26:50 +0100 |
---|---|---|
committer | Wolfram Sang <wsa@the-dreams.de> | 2014-11-23 17:27:46 +0100 |
commit | 249051f49907e7d147228a7d27a8ec37da1ea0fa (patch) | |
tree | a21bd2db97db21b85fe9614f6ea21f1e88b37331 /drivers/i2c/busses/i2c-rk3x.c | |
parent | 727f9c2dad9dd3e9aff4f64e92df577f1409a768 (diff) | |
download | op-kernel-dev-249051f49907e7d147228a7d27a8ec37da1ea0fa.zip op-kernel-dev-249051f49907e7d147228a7d27a8ec37da1ea0fa.tar.gz |
i2c: rk3x: handle dynamic clock rate changes correctly
The i2c input clock can change dynamically, e.g. on the RK3066 where
pclk_i2c0 and pclk_i2c1 are connected to the armclk, which changes
rate on cpu frequency scaling.
Until now, we incorrectly called clk_get_rate() while holding the
i2c->lock in rk3x_i2c_xfer() to adapt to clock rate changes.
Thanks to Huang Tao for reporting this issue.
Do it properly now using the clk notifier framework. The callback
logic was taken from i2c-cadence.c.
Also rename all misleading "i2c_rate" variables to "clk_rate", as they
describe the *input* clk rate.
Signed-off-by: Max Schwarz <max.schwarz@online.de>
Tested-by: Doug Anderson <dianders@chromium.org> on RK3288
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c/busses/i2c-rk3x.c')
-rw-r--r-- | drivers/i2c/busses/i2c-rk3x.c | 153 |
1 files changed, 118 insertions, 35 deletions
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index e276ffb..0ee5802 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -98,6 +98,7 @@ struct rk3x_i2c { /* Hardware resources */ void __iomem *regs; struct clk *clk; + struct notifier_block clk_rate_nb; /* Settings */ unsigned int scl_frequency; @@ -429,15 +430,27 @@ out: return IRQ_HANDLED; } -static int rk3x_i2c_calc_divs(unsigned long i2c_rate, unsigned long scl_rate, - unsigned long *div_low, unsigned long *div_high) +/** + * Calculate divider values for desired SCL frequency + * + * @clk_rate: I2C input clock rate + * @scl_rate: Desired SCL rate + * @div_low: Divider output for low + * @div_high: Divider output for high + * + * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case + * a best-effort divider value is returned in divs. If the target rate is + * too high, we silently use the highest possible rate. + */ +static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate, + unsigned long *div_low, unsigned long *div_high) { unsigned long min_low_ns, min_high_ns; unsigned long max_data_hold_ns; unsigned long data_hold_buffer_ns; unsigned long max_low_ns, min_total_ns; - unsigned long i2c_rate_khz, scl_rate_khz; + unsigned long clk_rate_khz, scl_rate_khz; unsigned long min_low_div, min_high_div; unsigned long max_low_div; @@ -445,6 +458,8 @@ static int rk3x_i2c_calc_divs(unsigned long i2c_rate, unsigned long scl_rate, unsigned long min_div_for_hold, min_total_div; unsigned long extra_div, extra_low_div, ideal_low_div; + int ret = 0; + /* Only support standard-mode and fast-mode */ if (WARN_ON(scl_rate > 400000)) scl_rate = 400000; @@ -480,25 +495,25 @@ static int rk3x_i2c_calc_divs(unsigned long i2c_rate, unsigned long scl_rate, min_total_ns = min_low_ns + min_high_ns; /* Adjust to avoid overflow */ - i2c_rate_khz = DIV_ROUND_UP(i2c_rate, 1000); + clk_rate_khz = DIV_ROUND_UP(clk_rate, 1000); scl_rate_khz = scl_rate / 1000; /* * We need the total div to be >= this number * so we don't clock too fast. */ - min_total_div = DIV_ROUND_UP(i2c_rate_khz, scl_rate_khz * 8); + min_total_div = DIV_ROUND_UP(clk_rate_khz, scl_rate_khz * 8); /* These are the min dividers needed for min hold times. */ - min_low_div = DIV_ROUND_UP(i2c_rate_khz * min_low_ns, 8 * 1000000); - min_high_div = DIV_ROUND_UP(i2c_rate_khz * min_high_ns, 8 * 1000000); + min_low_div = DIV_ROUND_UP(clk_rate_khz * min_low_ns, 8 * 1000000); + min_high_div = DIV_ROUND_UP(clk_rate_khz * min_high_ns, 8 * 1000000); min_div_for_hold = (min_low_div + min_high_div); /* * This is the maximum divider so we don't go over the max. * We don't round up here (we round down) since this is a max. */ - max_low_div = i2c_rate_khz * max_low_ns / (8 * 1000000); + max_low_div = clk_rate_khz * max_low_ns / (8 * 1000000); if (min_low_div > max_low_div) { WARN_ONCE(true, @@ -526,7 +541,7 @@ static int rk3x_i2c_calc_divs(unsigned long i2c_rate, unsigned long scl_rate, * biasing slightly towards having a higher div * for low (spend more time low). */ - ideal_low_div = DIV_ROUND_UP(i2c_rate_khz * min_low_ns, + ideal_low_div = DIV_ROUND_UP(clk_rate_khz * min_low_ns, scl_rate_khz * 8 * min_total_ns); /* Don't allow it to go over the max */ @@ -547,40 +562,99 @@ static int rk3x_i2c_calc_divs(unsigned long i2c_rate, unsigned long scl_rate, } /* - * Adjust to the fact that the hardware has an implicit "+1". - * NOTE: Above calculations always produce div_low > 0 and div_high > 0. - */ + * Adjust to the fact that the hardware has an implicit "+1". + * NOTE: Above calculations always produce div_low > 0 and div_high > 0. + */ *div_low = *div_low - 1; *div_high = *div_high - 1; - if (*div_low >= 0xffff || *div_high >= 0xffff) - return -EINVAL; - else - return 0; + /* Maximum divider supported by hw is 0xffff */ + if (*div_low > 0xffff) { + *div_low = 0xffff; + ret = -EINVAL; + } + + if (*div_high > 0xffff) { + *div_high = 0xffff; + ret = -EINVAL; + } + + return ret; } -static int rk3x_i2c_set_scl_rate(struct rk3x_i2c *i2c, unsigned long scl_rate) +static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate) { - unsigned long i2c_rate = clk_get_rate(i2c->clk); unsigned long div_low, div_high; u64 t_low_ns, t_high_ns; - int ret = 0; + int ret; - ret = rk3x_i2c_calc_divs(i2c_rate, scl_rate, &div_low, &div_high); - if (ret < 0) - return ret; + ret = rk3x_i2c_calc_divs(clk_rate, i2c->scl_frequency, &div_low, + &div_high); + WARN_ONCE(ret != 0, "Could not reach SCL freq %u", i2c->scl_frequency); + + clk_enable(i2c->clk); i2c_writel(i2c, (div_high << 16) | (div_low & 0xffff), REG_CLKDIV); + clk_disable(i2c->clk); - t_low_ns = div_u64(((u64)div_low + 1) * 8 * 1000000000, i2c_rate); - t_high_ns = div_u64(((u64)div_high + 1) * 8 * 1000000000, i2c_rate); + t_low_ns = div_u64(((u64)div_low + 1) * 8 * 1000000000, clk_rate); + t_high_ns = div_u64(((u64)div_high + 1) * 8 * 1000000000, clk_rate); dev_dbg(i2c->dev, - "CLK %lukhz, Req %luns, Act low %lluns high %lluns\n", - i2c_rate / 1000, - 1000000000 / scl_rate, + "CLK %lukhz, Req %uns, Act low %lluns high %lluns\n", + clk_rate / 1000, + 1000000000 / i2c->scl_frequency, t_low_ns, t_high_ns); +} - return ret; +/** + * rk3x_i2c_clk_notifier_cb - Clock rate change callback + * @nb: Pointer to notifier block + * @event: Notification reason + * @data: Pointer to notification data object + * + * The callback checks whether a valid bus frequency can be generated after the + * change. If so, the change is acknowledged, otherwise the change is aborted. + * New dividers are written to the HW in the pre- or post change notification + * depending on the scaling direction. + * + * Code adapted from i2c-cadence.c. + * + * Return: NOTIFY_STOP if the rate change should be aborted, NOTIFY_OK + * to acknowedge the change, NOTIFY_DONE if the notification is + * considered irrelevant. + */ +static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long + event, void *data) +{ + struct clk_notifier_data *ndata = data; + struct rk3x_i2c *i2c = container_of(nb, struct rk3x_i2c, clk_rate_nb); + unsigned long div_low, div_high; + + switch (event) { + case PRE_RATE_CHANGE: + if (rk3x_i2c_calc_divs(ndata->new_rate, i2c->scl_frequency, + &div_low, &div_high) != 0) { + return NOTIFY_STOP; + } + + /* scale up */ + if (ndata->new_rate > ndata->old_rate) + rk3x_i2c_adapt_div(i2c, ndata->new_rate); + + return NOTIFY_OK; + case POST_RATE_CHANGE: + /* scale down */ + if (ndata->new_rate < ndata->old_rate) + rk3x_i2c_adapt_div(i2c, ndata->new_rate); + return NOTIFY_OK; + case ABORT_RATE_CHANGE: + /* scale up */ + if (ndata->new_rate > ndata->old_rate) + rk3x_i2c_adapt_div(i2c, ndata->old_rate); + return NOTIFY_OK; + default: + return NOTIFY_DONE; + } } /** @@ -677,11 +751,6 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap, clk_enable(i2c->clk); - /* The clock rate might have changed, so setup the divider again */ - ret = rk3x_i2c_set_scl_rate(i2c, i2c->scl_frequency); - if (ret < 0) - goto exit; - i2c->is_last_msg = false; /* @@ -728,7 +797,6 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap, } } -exit: clk_disable(i2c->clk); spin_unlock_irqrestore(&i2c->lock, flags); @@ -768,6 +836,7 @@ static int rk3x_i2c_probe(struct platform_device *pdev) int bus_nr; u32 value; int irq; + unsigned long clk_rate; i2c = devm_kzalloc(&pdev->dev, sizeof(struct rk3x_i2c), GFP_KERNEL); if (!i2c) @@ -868,16 +937,28 @@ static int rk3x_i2c_probe(struct platform_device *pdev) return ret; } + i2c->clk_rate_nb.notifier_call = rk3x_i2c_clk_notifier_cb; + ret = clk_notifier_register(i2c->clk, &i2c->clk_rate_nb); + if (ret != 0) { + dev_err(&pdev->dev, "Unable to register clock notifier\n"); + goto err_clk; + } + + clk_rate = clk_get_rate(i2c->clk); + rk3x_i2c_adapt_div(i2c, clk_rate); + ret = i2c_add_adapter(&i2c->adap); if (ret < 0) { dev_err(&pdev->dev, "Could not register adapter\n"); - goto err_clk; + goto err_clk_notifier; } dev_info(&pdev->dev, "Initialized RK3xxx I2C bus at %p\n", i2c->regs); return 0; +err_clk_notifier: + clk_notifier_unregister(i2c->clk, &i2c->clk_rate_nb); err_clk: clk_unprepare(i2c->clk); return ret; @@ -888,6 +969,8 @@ static int rk3x_i2c_remove(struct platform_device *pdev) struct rk3x_i2c *i2c = platform_get_drvdata(pdev); i2c_del_adapter(&i2c->adap); + + clk_notifier_unregister(i2c->clk, &i2c->clk_rate_nb); clk_unprepare(i2c->clk); return 0; |