diff options
author | Naveen Kaje <nkaje@codeaurora.org> | 2016-10-11 10:27:56 -0600 |
---|---|---|
committer | Wolfram Sang <wsa@the-dreams.de> | 2016-11-29 22:42:47 +0100 |
commit | 515da746983bc6382e380ba8b1ce9345a9550ffe (patch) | |
tree | af370c29135e1c6cfdb734c8d045f752f64aad49 /drivers/i2c/busses/i2c-qup.c | |
parent | f06122f0bdd0d3c851c452f7c11a3a2198221fdd (diff) | |
download | op-kernel-dev-515da746983bc6382e380ba8b1ce9345a9550ffe.zip op-kernel-dev-515da746983bc6382e380ba8b1ce9345a9550ffe.tar.gz |
i2c: qup: add ACPI support
Add support to get the device parameters from ACPI. Assume
that the clocks are managed by firmware.
Signed-off-by: Naveen Kaje <nkaje@codeaurora.org>
Signed-off-by: Austin Christ <austinwc@codeaurora.org>
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c/busses/i2c-qup.c')
-rw-r--r-- | drivers/i2c/busses/i2c-qup.c | 58 |
1 files changed, 42 insertions, 16 deletions
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index a8497cf..cef553f 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -14,6 +14,7 @@ * */ +#include <linux/acpi.h> #include <linux/atomic.h> #include <linux/clk.h> #include <linux/delay.h> @@ -132,6 +133,10 @@ /* Max timeout in ms for 32k bytes */ #define TOUT_MAX 300 +/* Default values. Use these if FW query fails */ +#define DEFAULT_CLK_FREQ 100000 +#define DEFAULT_SRC_CLK 20000000 + struct qup_i2c_block { int count; int pos; @@ -1358,14 +1363,13 @@ static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup) static int qup_i2c_probe(struct platform_device *pdev) { static const int blk_sizes[] = {4, 16, 32}; - struct device_node *node = pdev->dev.of_node; struct qup_i2c_dev *qup; unsigned long one_bit_t; struct resource *res; u32 io_mode, hw_ver, size; int ret, fs_div, hs_div; - int src_clk_freq; - u32 clk_freq = 100000; + u32 src_clk_freq = DEFAULT_SRC_CLK; + u32 clk_freq = DEFAULT_CLK_FREQ; int blocks; qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL); @@ -1376,7 +1380,11 @@ static int qup_i2c_probe(struct platform_device *pdev) init_completion(&qup->xfer); platform_set_drvdata(pdev, qup); - of_property_read_u32(node, "clock-frequency", &clk_freq); + ret = device_property_read_u32(qup->dev, "clock-frequency", &clk_freq); + if (ret) { + dev_notice(qup->dev, "using default clock-frequency %d", + DEFAULT_CLK_FREQ); + } if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) { qup->adap.algo = &qup_i2c_algo; @@ -1452,20 +1460,30 @@ nodma: return qup->irq; } - qup->clk = devm_clk_get(qup->dev, "core"); - if (IS_ERR(qup->clk)) { - dev_err(qup->dev, "Could not get core clock\n"); - return PTR_ERR(qup->clk); - } + if (has_acpi_companion(qup->dev)) { + ret = device_property_read_u32(qup->dev, + "src-clock-hz", &src_clk_freq); + if (ret) { + dev_notice(qup->dev, "using default src-clock-hz %d", + DEFAULT_SRC_CLK); + } + ACPI_COMPANION_SET(&qup->adap.dev, ACPI_COMPANION(qup->dev)); + } else { + qup->clk = devm_clk_get(qup->dev, "core"); + if (IS_ERR(qup->clk)) { + dev_err(qup->dev, "Could not get core clock\n"); + return PTR_ERR(qup->clk); + } - qup->pclk = devm_clk_get(qup->dev, "iface"); - if (IS_ERR(qup->pclk)) { - dev_err(qup->dev, "Could not get iface clock\n"); - return PTR_ERR(qup->pclk); + qup->pclk = devm_clk_get(qup->dev, "iface"); + if (IS_ERR(qup->pclk)) { + dev_err(qup->dev, "Could not get iface clock\n"); + return PTR_ERR(qup->pclk); + } + qup_i2c_enable_clocks(qup); + src_clk_freq = clk_get_rate(qup->clk); } - qup_i2c_enable_clocks(qup); - /* * Bootloaders might leave a pending interrupt on certain QUP's, * so we reset the core before registering for interrupts. @@ -1512,7 +1530,6 @@ nodma: size = QUP_INPUT_FIFO_SIZE(io_mode); qup->in_fifo_sz = qup->in_blk_sz * (2 << size); - src_clk_freq = clk_get_rate(qup->clk); fs_div = ((src_clk_freq / clk_freq) / 2) - 3; hs_div = 3; qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff); @@ -1631,6 +1648,14 @@ static const struct of_device_id qup_i2c_dt_match[] = { }; MODULE_DEVICE_TABLE(of, qup_i2c_dt_match); +#if IS_ENABLED(CONFIG_ACPI) +static const struct acpi_device_id qup_i2c_acpi_match[] = { + { "QCOM8010"}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match); +#endif + static struct platform_driver qup_i2c_driver = { .probe = qup_i2c_probe, .remove = qup_i2c_remove, @@ -1638,6 +1663,7 @@ static struct platform_driver qup_i2c_driver = { .name = "i2c_qup", .pm = &qup_i2c_qup_pm_ops, .of_match_table = qup_i2c_dt_match, + .acpi_match_table = ACPI_PTR(qup_i2c_acpi_match), }, }; |