Merge branch 'i2c/for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "Highlights:

   - new drivers for Mediatek I2C, APM X-Gene, Broadcom Settop
   - major updates to at91, davinci
   - bugfixes to the mux infrastructure when dealing with the new quirk
     mechanism
   - more users for the bus recovery feature
   - further improvements to the slave framework

  Plus the usual bunch of smaller driver and core improvements and
  fixes.

  There is one patch removing old code from an ARM platform.  This has
  been acked by the sh_mobile maintainer Simon Horman"

* 'i2c/for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (48 commits)
  i2c: busses: i2c-bcm2835: limits cdiv to allowed values
  i2c: sh_mobile: use proper type for timeout
  i2c: sh_mobile: use adapter default for timeout
  i2c: rcar: use proper type for timeout
  i2c: rcar: use adapter default for timeout
  i2c: designware: Make sure the device is suspended before disabling runtime PM
  i2c: tegra: apply size limit quirk
  i2c: tegra: don't advertise SMBUS_QUICK
  i2c: octeon: remove unused signal handling
  i2c: davinci: Optimize SCL generation
  i2c: mux: pca954x: Use __i2c_transfer because of quirks
  i2c: mux: Use __i2c_transfer() instead of calling parent's master_xfer()
  i2c: use parent adapter quirks in mux
  i2c: bcm2835: clear reserved bits in S-Register
  ARM: shmobile: r8a7740: remove I2C errata handling
  i2c: sh_mobile: add errata workaround
  i2c: at91: fix code checker warnings
  i2c: busses: xgene-slimpro: fix incorrect __init declation for probe
  i2c: davinci: Avoid sending to own address
  i2c: davinci: Refactor i2c_davinci_wait_bus_not_busy()
  ...

1 files changed, 30 insertions, 2 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 5f1c1c4..35ac237 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -392,6 +392,16 @@ config I2C_BCM_KONA
 
 	  If you do not need KONA I2C interface, say N.
 
+config I2C_BRCMSTB
+	tristate "BRCM Settop I2C controller"
+	depends on ARCH_BRCMSTB || COMPILE_TEST
+	default y
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C interface on the Broadcom Settop SoCs.
+
+	  If you do not need I2C interface, say N.
+
 config I2C_BLACKFIN_TWI
 	tristate "Blackfin TWI I2C support"
 	depends on BLACKFIN
@@ -419,7 +429,7 @@ config I2C_CADENCE
 
 config I2C_CBUS_GPIO
 	tristate "CBUS I2C driver"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Support for CBUS access using I2C API. Mostly relevant for Nokia
 	  Internet Tablets (770, N800 and N810).
@@ -525,7 +535,7 @@ config I2C_EXYNOS5
 
 config I2C_GPIO
 	tristate "GPIO-based bitbanging I2C"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	select I2C_ALGOBIT
 	help
 	  This is a very simple bitbanging I2C driver utilizing the
@@ -620,6 +630,15 @@ config I2C_MPC
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-mpc.
 
+config I2C_MT65XX
+	tristate "MediaTek I2C adapter"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	help
+	  This selects the MediaTek(R) Integrated Inter Circuit bus driver
+	  for MT65xx and MT81xx.
+	  If you want to use MediaTek(R) I2C interface, say Y or M here.
+	  If unsure, say N.
+
 config I2C_MV64XXX
 	tristate "Marvell mv64xxx I2C Controller"
 	depends on MV64X60 || PLAT_ORION || ARCH_SUNXI
@@ -1110,6 +1129,15 @@ config I2C_CROS_EC_TUNNEL
 	  connected there. This will work whatever the interface used to
 	  talk to the EC (SPI, I2C or LPC).
 
+config I2C_XGENE_SLIMPRO
+	tristate "APM X-Gene SoC I2C SLIMpro devices support"
+	depends on ARCH_XGENE && MAILBOX
+	help
+	  Enable I2C bus access using the APM X-Gene SoC SLIMpro
+	  co-processor. The I2C device access the I2C bus via the X-Gene
+	  to SLIMpro (On chip coprocessor) mailbox mechanism.
+	  If unsure, say N.
+
 config SCx200_ACB
 	tristate "Geode ACCESS.bus support"
 	depends on X86_32 && PCI