Merge commit 'v2.6.30-rc5' into core/iommu

Merge reason: core/iommu was on an .30-rc1 base,
              update it to .30-rc5 to refresh.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

6 files changed, 707 insertions, 2 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 0e8a918..d73f5f4 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -692,6 +692,16 @@ config SENSORS_PCF8591
 	  These devices are hard to detect and rarely found on mainstream
 	  hardware.  If unsure, say N.
 
+config SENSORS_SHT15
+	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
+	depends on GENERIC_GPIO
+	help
+	  If you say yes here you get support for the Sensiron SHT10, SHT11,
+	  SHT15, SHT71, SHT75 humidity and temperature sensors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sht15.
+
 config SENSORS_SIS5595
 	tristate "Silicon Integrated Systems Corp. SiS5595"
 	depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 1d37578..0ae2698 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
+obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
 obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
 obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
 obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 0897ede..bff0103 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -348,6 +348,7 @@ static int validate_hwmon_pack(struct atk_data *data, union acpi_object *obj)
 	return 0;
 }
 
+#ifdef DEBUG
 static char const *atk_sensor_type(union acpi_object *flags)
 {
 	u64 type = flags->integer.value & ATK_TYPE_MASK;
@@ -370,6 +371,7 @@ static char const *atk_sensor_type(union acpi_object *flags)
 
 	return what;
 }
+#endif
 
 static void atk_print_sensor(struct atk_data *data, union acpi_object *obj)
 {
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 55d3dc5..abca7e9 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -34,7 +34,6 @@
 #include <linux/wait.h>
 #include <linux/poll.h>
 #include <linux/freezer.h>
-#include <linux/version.h>
 #include <linux/uaccess.h>
 #include <linux/leds.h>
 #include <acpi/acpi_drivers.h>
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
new file mode 100644
index 0000000..6cbdc2f
--- /dev/null
+++ b/drivers/hwmon/sht15.c
@@ -0,0 +1,692 @@
+/*
+ * sht15.c - support for the SHT15 Temperature and Humidity Sensor
+ *
+ * Copyright (c) 2009 Jonathan Cameron
+ *
+ * Copyright (c) 2007 Wouter Horre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Currently ignoring checksum on readings.
+ * Default resolution only (14bit temp, 12bit humidity)
+ * Ignoring battery status.
+ * Heater not enabled.
+ * Timings are all conservative.
+ *
+ * Data sheet available (1/2009) at
+ * http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf
+ *
+ * Regulator supply name = vcc
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include <linux/sht15.h>
+#include <linux/regulator/consumer.h>
+#include <asm/atomic.h>
+
+#define SHT15_MEASURE_TEMP	3
+#define SHT15_MEASURE_RH	5
+
+#define SHT15_READING_NOTHING	0
+#define SHT15_READING_TEMP	1
+#define SHT15_READING_HUMID	2
+
+/* Min timings in nsecs */
+#define SHT15_TSCKL		100	/* clock low */
+#define SHT15_TSCKH		100	/* clock high */
+#define SHT15_TSU		150	/* data setup time */
+
+/**
+ * struct sht15_temppair - elements of voltage dependant temp calc
+ * @vdd:	supply voltage in microvolts
+ * @d1:		see data sheet
+ */
+struct sht15_temppair {
+	int vdd; /* microvolts */
+	int d1;
+};
+
+/* Table 9 from data sheet - relates temperature calculation
+ * to supply voltage.
+ */
+static const struct sht15_temppair temppoints[] = {
+	{ 2500000, -39400 },
+	{ 3000000, -39600 },
+	{ 3500000, -39700 },
+	{ 4000000, -39800 },
+	{ 5000000, -40100 },
+};
+
+/**
+ * struct sht15_data - device instance specific data
+ * @pdata:	platform data (gpio's etc)
+ * @read_work:	bh of interrupt handler
+ * @wait_queue:	wait queue for getting values from device
+ * @val_temp:	last temperature value read from device
+ * @val_humid: 	last humidity value read from device
+ * @flag:	status flag used to identify what the last request was
+ * @valid:	are the current stored values valid (start condition)
+ * @last_updat:	time of last update
+ * @read_lock:	mutex to ensure only one read in progress
+ *		at a time.
+ * @dev:	associate device structure
+ * @hwmon_dev:	device associated with hwmon subsystem
+ * @reg:	associated regulator (if specified)
+ * @nb:		notifier block to handle notifications of voltage changes
+ * @supply_uV:	local copy of supply voltage used to allow
+ *		use of regulator consumer if available
+ * @supply_uV_valid:   indicates that an updated value has not yet
+ *		been obtained from the regulator and so any calculations
+ *		based upon it will be invalid.
+ * @update_supply_work:	work struct that is used to update the supply_uV
+ * @interrupt_handled:	flag used to indicate a hander has been scheduled
+ */
+struct sht15_data {
+	struct sht15_platform_data	*pdata;
+	struct work_struct		read_work;
+	wait_queue_head_t		wait_queue;
+	uint16_t			val_temp;
+	uint16_t			val_humid;
+	u8				flag;
+	u8				valid;
+	unsigned long			last_updat;
+	struct mutex			read_lock;
+	struct device			*dev;
+	struct device			*hwmon_dev;
+	struct regulator		*reg;
+	struct notifier_block		nb;
+	int				supply_uV;
+	int				supply_uV_valid;
+	struct work_struct		update_supply_work;
+	atomic_t			interrupt_handled;
+};
+
+/**
+ * sht15_connection_reset() - reset the comms interface
+ * @data:	sht15 specific data
+ *
+ * This implements section 3.4 of the data sheet
+ */
+static void sht15_connection_reset(struct sht15_data *data)
+{
+	int i;
+	gpio_direction_output(data->pdata->gpio_data, 1);
+	ndelay(SHT15_TSCKL);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL);
+	for (i = 0; i < 9; ++i) {
+		gpio_set_value(data->pdata->gpio_sck, 1);
+		ndelay(SHT15_TSCKH);
+		gpio_set_value(data->pdata->gpio_sck, 0);
+		ndelay(SHT15_TSCKL);
+	}
+}
+/**
+ * sht15_send_bit() - send an individual bit to the device
+ * @data:	device state data
+ * @val:	value of bit to be sent
+ **/
+static inline void sht15_send_bit(struct sht15_data *data, int val)
+{
+
+	gpio_set_value(data->pdata->gpio_data, val);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 1);
+	ndelay(SHT15_TSCKH);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL); /* clock low time */
+}
+
+/**
+ * sht15_transmission_start() - specific sequence for new transmission
+ *
+ * @data:	device state data
+ * Timings for this are not documented on the data sheet, so very
+ * conservative ones used in implementation. This implements
+ * figure 12 on the data sheet.
+ **/
+static void sht15_transmission_start(struct sht15_data *data)
+{
+	/* ensure data is high and output */
+	gpio_direction_output(data->pdata->gpio_data, 1);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL);
+	gpio_set_value(data->pdata->gpio_sck, 1);
+	ndelay(SHT15_TSCKH);
+	gpio_set_value(data->pdata->gpio_data, 0);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL);
+	gpio_set_value(data->pdata->gpio_sck, 1);
+	ndelay(SHT15_TSCKH);
+	gpio_set_value(data->pdata->gpio_data, 1);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL);
+}
+/**
+ * sht15_send_byte() - send a single byte to the device
+ * @data:	device state
+ * @byte:	value to be sent
+ **/
+static void sht15_send_byte(struct sht15_data *data, u8 byte)
+{
+	int i;
+	for (i = 0; i < 8; i++) {
+		sht15_send_bit(data, !!(byte & 0x80));
+		byte <<= 1;
+	}
+}
+/**
+ * sht15_wait_for_response() - checks for ack from device
+ * @data:	device state
+ **/
+static int sht15_wait_for_response(struct sht15_data *data)
+{
+	gpio_direction_input(data->pdata->gpio_data);
+	gpio_set_value(data->pdata->gpio_sck, 1);
+	ndelay(SHT15_TSCKH);
+	if (gpio_get_value(data->pdata->gpio_data)) {
+		gpio_set_value(data->pdata->gpio_sck, 0);
+		dev_err(data->dev, "Command not acknowledged\n");
+		sht15_connection_reset(data);
+		return -EIO;
+	}
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL);
+	return 0;
+}
+
+/**
+ * sht15_send_cmd() - Sends a command to the device.
+ * @data:	device state
+ * @cmd:	command byte to be sent
+ *
+ * On entry, sck is output low, data is output pull high
+ * and the interrupt disabled.
+ **/
+static int sht15_send_cmd(struct sht15_data *data, u8 cmd)
+{
+	int ret = 0;
+	sht15_transmission_start(data);
+	sht15_send_byte(data, cmd);
+	ret = sht15_wait_for_response(data);
+	return ret;
+}
+/**
+ * sht15_update_single_val() - get a new value from device
+ * @data:		device instance specific data
+ * @command:		command sent to request value
+ * @timeout_msecs:	timeout after which comms are assumed
+ *			to have failed are reset.
+ **/
+static inline int sht15_update_single_val(struct sht15_data *data,
+					  int command,
+					  int timeout_msecs)
+{
+	int ret;
+	ret = sht15_send_cmd(data, command);
+	if (ret)
+		return ret;
+
+	gpio_direction_input(data->pdata->gpio_data);
+	atomic_set(&data->interrupt_handled, 0);
+
+	enable_irq(gpio_to_irq(data->pdata->gpio_data));
+	if (gpio_get_value(data->pdata->gpio_data) == 0) {
+		disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
+		/* Only relevant if the interrupt hasn't occured. */
+		if (!atomic_read(&data->interrupt_handled))
+			schedule_work(&data->read_work);
+	}
+	ret = wait_event_timeout(data->wait_queue,
+				 (data->flag == SHT15_READING_NOTHING),
+				 msecs_to_jiffies(timeout_msecs));
+	if (ret == 0) {/* timeout occurred */
+		disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));;
+		sht15_connection_reset(data);
+		return -ETIME;
+	}
+	return 0;
+}
+
+/**
+ * sht15_update_vals() - get updated readings from device if too old
+ * @data:	device state
+ **/
+static int sht15_update_vals(struct sht15_data *data)
+{
+	int ret = 0;
+	int timeout = HZ;
+
+	mutex_lock(&data->read_lock);
+	if (time_after(jiffies, data->last_updat + timeout)
+	    || !data->valid) {
+		data->flag = SHT15_READING_HUMID;
+		ret = sht15_update_single_val(data, SHT15_MEASURE_RH, 160);
+		if (ret)
+			goto error_ret;
+		data->flag = SHT15_READING_TEMP;
+		ret = sht15_update_single_val(data, SHT15_MEASURE_TEMP, 400);
+		if (ret)
+			goto error_ret;
+		data->valid = 1;
+		data->last_updat = jiffies;
+	}
+error_ret:
+	mutex_unlock(&data->read_lock);
+
+	return ret;
+}
+
+/**
+ * sht15_calc_temp() - convert the raw reading to a temperature
+ * @data:	device state
+ *
+ * As per section 4.3 of the data sheet.
+ **/
+static inline int sht15_calc_temp(struct sht15_data *data)
+{
+	int d1 = 0;
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++)
+		/* Find pointer to interpolate */
+		if (data->supply_uV > temppoints[i - 1].vdd) {
+			d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd)
+				* (temppoints[i].d1 - temppoints[i - 1].d1)
+				/ (temppoints[i].vdd - temppoints[i - 1].vdd)
+				+ temppoints[i - 1].d1;
+			break;
+		}
+
+	return data->val_temp*10 + d1;
+}
+
+/**
+ * sht15_calc_humid() - using last temperature convert raw to humid
+ * @data:	device state
+ *
+ * This is the temperature compensated version as per section 4.2 of
+ * the data sheet.
+ **/
+static inline int sht15_calc_humid(struct sht15_data *data)
+{
+	int RHlinear; /* milli percent */
+	int temp = sht15_calc_temp(data);
+
+	const int c1 = -4;
+	const int c2 = 40500; /* x 10 ^ -6 */
+	const int c3 = 2800; /* x10 ^ -9 */
+
+	RHlinear = c1*1000
+		+ c2 * data->val_humid/1000
+		+ (data->val_humid * data->val_humid * c3)/1000000;
+	return (temp - 25000) * (10000 + 800 * data->val_humid)
+		/ 1000000 + RHlinear;
+}
+
+static ssize_t sht15_show_temp(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	int ret;
+	struct sht15_data *data = dev_get_drvdata(dev);
+
+	/* Technically no need to read humidity as well */
+	ret = sht15_update_vals(data);
+
+	return ret ? ret : sprintf(buf, "%d\n",
+				   sht15_calc_temp(data));
+}
+
+static ssize_t sht15_show_humidity(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	int ret;
+	struct sht15_data *data = dev_get_drvdata(dev);
+
+	ret = sht15_update_vals(data);
+
+	return ret ? ret : sprintf(buf, "%d\n", sht15_calc_humid(data));
+
+};
+static ssize_t show_name(struct device *dev,
+			 struct device_attribute *attr,
+			 char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	return sprintf(buf, "%s\n", pdev->name);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input,
+			  S_IRUGO, sht15_show_temp,
+			  NULL, 0);
+static SENSOR_DEVICE_ATTR(humidity1_input,
+			  S_IRUGO, sht15_show_humidity,
+			  NULL, 0);
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static struct attribute *sht15_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_humidity1_input.dev_attr.attr,
+	&dev_attr_name.attr,
+	NULL,
+};
+
+static const struct attribute_group sht15_attr_group = {
+	.attrs = sht15_attrs,
+};
+
+static irqreturn_t sht15_interrupt_fired(int irq, void *d)
+{
+	struct sht15_data *data = d;
+	/* First disable the interrupt */
+	disable_irq_nosync(irq);
+	atomic_inc(&data->interrupt_handled);
+	/* Then schedule a reading work struct */
+	if (data->flag != SHT15_READING_NOTHING)
+		schedule_work(&data->read_work);
+	return IRQ_HANDLED;
+}
+
+/* Each byte of data is acknowledged by pulling the data line
+ * low for one clock pulse.
+ */
+static void sht15_ack(struct sht15_data *data)
+{
+	gpio_direction_output(data->pdata->gpio_data, 0);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 1);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_data, 1);
+
+	gpio_direction_input(data->pdata->gpio_data);
+}
+/**
+ * sht15_end_transmission() - notify device of end of transmission
+ * @data:	device state
+ *
+ * This is basically a NAK. (single clock pulse, data high)
+ **/
+static void sht15_end_transmission(struct sht15_data *data)
+{
+	gpio_direction_output(data->pdata->gpio_data, 1);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 1);
+	ndelay(SHT15_TSCKH);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL);
+}
+
+static void sht15_bh_read_data(struct work_struct *work_s)
+{
+	int i;
+	uint16_t val = 0;
+	struct sht15_data *data
+		= container_of(work_s, struct sht15_data,
+			       read_work);
+	/* Firstly, verify the line is low */
+	if (gpio_get_value(data->pdata->gpio_data)) {
+		/* If not, then start the interrupt again - care
+		   here as could have gone low in meantime so verify
+		   it hasn't!
+		*/
+		atomic_set(&data->interrupt_handled, 0);
+		enable_irq(gpio_to_irq(data->pdata->gpio_data));
+		/* If still not occured or another handler has been scheduled */
+		if (gpio_get_value(data->pdata->gpio_data)
+		    || atomic_read(&data->interrupt_handled))
+			return;
+	}
+	/* Read the data back from the device */
+	for (i = 0; i < 16; ++i) {
+		val <<= 1;
+		gpio_set_value(data->pdata->gpio_sck, 1);
+		ndelay(SHT15_TSCKH);
+		val |= !!gpio_get_value(data->pdata->gpio_data);
+		gpio_set_value(data->pdata->gpio_sck, 0);
+		ndelay(SHT15_TSCKL);
+		if (i == 7)
+			sht15_ack(data);
+	}
+	/* Tell the device we are done */
+	sht15_end_transmission(data);
+
+	switch (data->flag) {
+	case SHT15_READING_TEMP:
+		data->val_temp = val;
+		break;
+	case SHT15_READING_HUMID:
+		data->val_humid = val;
+		break;
+	}
+
+	data->flag = SHT15_READING_NOTHING;
+	wake_up(&data->wait_queue);
+}
+
+static void sht15_update_voltage(struct work_struct *work_s)
+{
+	struct sht15_data *data
+		= container_of(work_s, struct sht15_data,
+			       update_supply_work);
+	data->supply_uV = regulator_get_voltage(data->reg);
+}
+
+/**
+ * sht15_invalidate_voltage() - mark supply voltage invalid when notified by reg
+ * @nb:		associated notification structure
+ * @event:	voltage regulator state change event code
+ * @ignored:	function parameter - ignored here
+ *
+ * Note that as the notification code holds the regulator lock, we have
+ * to schedule an update of the supply voltage rather than getting it directly.
+ **/
+static int sht15_invalidate_voltage(struct notifier_block *nb,
+				unsigned long event,
+				void *ignored)
+{
+	struct sht15_data *data = container_of(nb, struct sht15_data, nb);
+
+	if (event == REGULATOR_EVENT_VOLTAGE_CHANGE)
+		data->supply_uV_valid = false;
+	schedule_work(&data->update_supply_work);
+
+	return NOTIFY_OK;
+}
+
+static int __devinit sht15_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL);
+
+	if (!data) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "kzalloc failed");
+		goto error_ret;
+	}
+
+	INIT_WORK(&data->read_work, sht15_bh_read_data);
+	INIT_WORK(&data->update_supply_work, sht15_update_voltage);
+	platform_set_drvdata(pdev, data);
+	mutex_init(&data->read_lock);
+	data->dev = &pdev->dev;
+	init_waitqueue_head(&data->wait_queue);
+
+	if (pdev->dev.platform_data == NULL) {
+		dev_err(&pdev->dev, "no platform data supplied");
+		goto err_free_data;
+	}
+	data->pdata = pdev->dev.platform_data;
+	data->supply_uV = data->pdata->supply_mv*1000;
+
+/* If a regulator is available, query what the supply voltage actually is!*/
+	data->reg = regulator_get(data->dev, "vcc");
+	if (!IS_ERR(data->reg)) {
+		data->supply_uV = regulator_get_voltage(data->reg);
+		regulator_enable(data->reg);
+		/* setup a notifier block to update this if another device
+		 *  causes the voltage to change */
+		data->nb.notifier_call = &sht15_invalidate_voltage;
+		ret = regulator_register_notifier(data->reg, &data->nb);
+	}
+/* Try requesting the GPIOs */
+	ret = gpio_request(data->pdata->gpio_sck, "SHT15 sck");
+	if (ret) {
+		dev_err(&pdev->dev, "gpio request failed");
+		goto err_free_data;
+	}
+	gpio_direction_output(data->pdata->gpio_sck, 0);
+	ret = gpio_request(data->pdata->gpio_data, "SHT15 data");
+	if (ret) {
+		dev_err(&pdev->dev, "gpio request failed");
+		goto err_release_gpio_sck;
+	}
+	ret = sysfs_create_group(&pdev->dev.kobj, &sht15_attr_group);
+	if (ret) {
+		dev_err(&pdev->dev, "sysfs create failed");
+		goto err_free_data;
+	}
+
+	ret = request_irq(gpio_to_irq(data->pdata->gpio_data),
+			  sht15_interrupt_fired,
+			  IRQF_TRIGGER_FALLING,
+			  "sht15 data",
+			  data);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to get irq for data line");
+		goto err_release_gpio_data;
+	}
+	disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
+	sht15_connection_reset(data);
+	sht15_send_cmd(data, 0x1E);
+
+	data->hwmon_dev = hwmon_device_register(data->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		ret = PTR_ERR(data->hwmon_dev);
+		goto err_release_gpio_data;
+	}
+	return 0;
+
+err_release_gpio_data:
+	gpio_free(data->pdata->gpio_data);
+err_release_gpio_sck:
+	gpio_free(data->pdata->gpio_sck);
+err_free_data:
+	kfree(data);
+error_ret:
+
+	return ret;
+}
+
+static int __devexit sht15_remove(struct platform_device *pdev)
+{
+	struct sht15_data *data = platform_get_drvdata(pdev);
+
+	/* Make sure any reads from the device are done and
+	 * prevent new ones beginnning */
+	mutex_lock(&data->read_lock);
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group);
+	if (!IS_ERR(data->reg)) {
+		regulator_unregister_notifier(data->reg, &data->nb);
+		regulator_disable(data->reg);
+		regulator_put(data->reg);
+	}
+
+	free_irq(gpio_to_irq(data->pdata->gpio_data), data);
+	gpio_free(data->pdata->gpio_data);
+	gpio_free(data->pdata->gpio_sck);
+	mutex_unlock(&data->read_lock);
+	kfree(data);
+	return 0;
+}
+
+
+static struct platform_driver sht_drivers[] = {
+	{
+		.driver = {
+			.name = "sht10",
+			.owner = THIS_MODULE,
+		},
+		.probe = sht15_probe,
+		.remove = sht15_remove,
+	}, {
+		.driver = {
+			.name = "sht11",
+			.owner = THIS_MODULE,
+		},
+		.probe = sht15_probe,
+		.remove = sht15_remove,
+	}, {
+		.driver = {
+			.name = "sht15",
+			.owner = THIS_MODULE,
+		},
+		.probe = sht15_probe,
+		.remove = sht15_remove,
+	}, {
+		.driver = {
+			.name = "sht71",
+			.owner = THIS_MODULE,
+		},
+		.probe = sht15_probe,
+		.remove = sht15_remove,
+	}, {
+		.driver = {
+			.name = "sht75",
+			.owner = THIS_MODULE,
+		},
+		.probe = sht15_probe,
+		.remove = sht15_remove,
+	},
+};
+
+
+static int __init sht15_init(void)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sht_drivers); i++) {
+		ret = platform_driver_register(&sht_drivers[i]);
+		if (ret)
+			goto error_unreg;
+	}
+
+	return 0;
+
+error_unreg:
+	while (--i >= 0)
+		platform_driver_unregister(&sht_drivers[i]);
+
+	return ret;
+}
+module_init(sht15_init);
+
+static void __exit sht15_exit(void)
+{
+	int i;
+	for (i = ARRAY_SIZE(sht_drivers) - 1; i >= 0; i--)
+		platform_driver_unregister(&sht_drivers[i]);
+}
+module_exit(sht15_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index dbfb30c..0bdab95 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1462,7 +1462,8 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
 				data->pwm[i] =
 				    w83781d_read_value(data,
 						       W83781D_REG_PWM[i]);
-				if ((data->type != w83782d || !client->driver)
+				/* Only W83782D on SMBus has PWM3 and PWM4 */
+				if ((data->type != w83782d || !client)
 				    && i == 1)
 					break;
 			}