summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/pmbus
diff options
context:
space:
mode:
authorGuenter Roeck <guenter.roeck@ericsson.com>2011-09-02 09:58:37 -0700
committerGuenter Roeck <guenter.roeck@ericsson.com>2011-10-24 11:09:42 -0700
commitc3ff9a674c2313d4f28e38d384b18b561b313eb7 (patch)
tree6c8dea7a9c7f43e471abac7ad56e882b74cc3b8d /drivers/hwmon/pmbus
parent3d790287c4e6caa8790421737b1cf8f0a6531559 (diff)
downloadop-kernel-dev-c3ff9a674c2313d4f28e38d384b18b561b313eb7.zip
op-kernel-dev-c3ff9a674c2313d4f28e38d384b18b561b313eb7.tar.gz
hwmon: (pmbus/ltc2978) Explicit driver for LTC2978
Provide explicit driver for LTC2978 to enable support for minimum and peak attributes. Remove ltc2978 chip id from generic pmbus driver. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
Diffstat (limited to 'drivers/hwmon/pmbus')
-rw-r--r--drivers/hwmon/pmbus/Kconfig12
-rw-r--r--drivers/hwmon/pmbus/Makefile1
-rw-r--r--drivers/hwmon/pmbus/ltc2978.c295
-rw-r--r--drivers/hwmon/pmbus/pmbus.c1
4 files changed, 307 insertions, 2 deletions
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index efaf340..c4dcdca 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -20,7 +20,7 @@ config SENSORS_PMBUS
help
If you say yes here you get hardware monitoring support for generic
PMBus devices, including but not limited to ADP4000, BMR450, BMR451,
- BMR453, BMR454, LTC2978, NCP4200, and NCP4208.
+ BMR453, BMR454, NCP4200, and NCP4208.
This driver can also be built as a module. If so, the module will
be called pmbus.
@@ -46,6 +46,16 @@ config SENSORS_LM25066
This driver can also be built as a module. If so, the module will
be called lm25066.
+config SENSORS_LTC2978
+ tristate "Linear Technologies LTC2978"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Linear
+ Technology LTC2978.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc2978.
+
config SENSORS_MAX16064
tristate "Maxim MAX16064"
default n
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index b9e4fb4..789376c 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_PMBUS) += pmbus_core.o
obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
+obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
new file mode 100644
index 0000000..02b2e49
--- /dev/null
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -0,0 +1,295 @@
+/*
+ * Hardware monitoring driver for LTC2978
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+enum chips { ltc2978 };
+
+#define LTC2978_MFR_VOUT_PEAK 0xdd
+#define LTC2978_MFR_VIN_PEAK 0xde
+#define LTC2978_MFR_TEMPERATURE_PEAK 0xdf
+#define LTC2978_MFR_SPECIAL_ID 0xe7
+
+#define LTC2978_MFR_VOUT_MIN 0xfb
+#define LTC2978_MFR_VIN_MIN 0xfc
+#define LTC2978_MFR_TEMPERATURE_MIN 0xfd
+
+#define LTC2978_ID_REV1 0x0121
+#define LTC2978_ID_REV2 0x0122
+
+/*
+ * LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which
+ * happens pretty much each time chip data is updated. Raw peak data therefore
+ * does not provide much value. To be able to provide useful peak data, keep an
+ * internal cache of measured peak data, which is only cleared if an explicit
+ * "clear peak" command is executed for the sensor in question.
+ */
+struct ltc2978_data {
+ enum chips id;
+ int vin_min, vin_max;
+ int temp_min, temp_max;
+ int vout_min[8], vout_max[8];
+ struct pmbus_driver_info info;
+};
+
+#define to_ltc2978_data(x) container_of(x, struct ltc2978_data, info)
+
+static inline int lin11_to_val(int data)
+{
+ s16 e = ((s16)data) >> 11;
+ s32 m = (((s16)(data << 5)) >> 5);
+
+ /*
+ * mantissa is 10 bit + sign, exponent adds up to 15 bit.
+ * Add 6 bit to exponent for maximum accuracy (10 + 15 + 6 = 31).
+ */
+ e += 6;
+ return (e < 0 ? m >> -e : m << e);
+}
+
+static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VIN_MAX:
+ ret = pmbus_read_word_data(client, page, LTC2978_MFR_VIN_PEAK);
+ if (ret >= 0) {
+ if (lin11_to_val(ret) > lin11_to_val(data->vin_max))
+ data->vin_max = ret;
+ ret = data->vin_max;
+ }
+ break;
+ case PMBUS_VIRT_READ_VOUT_MAX:
+ ret = pmbus_read_word_data(client, page, LTC2978_MFR_VOUT_PEAK);
+ if (ret >= 0) {
+ /*
+ * VOUT is 16 bit unsigned with fixed exponent,
+ * so we can compare it directly
+ */
+ if (ret > data->vout_max[page])
+ data->vout_max[page] = ret;
+ ret = data->vout_max[page];
+ }
+ break;
+ case PMBUS_VIRT_READ_TEMP_MAX:
+ ret = pmbus_read_word_data(client, page,
+ LTC2978_MFR_TEMPERATURE_PEAK);
+ if (ret >= 0) {
+ if (lin11_to_val(ret) > lin11_to_val(data->temp_max))
+ data->temp_max = ret;
+ ret = data->temp_max;
+ }
+ break;
+ case PMBUS_VIRT_READ_VIN_MIN:
+ ret = pmbus_read_word_data(client, page, LTC2978_MFR_VIN_MIN);
+ if (ret >= 0) {
+ if (lin11_to_val(ret) < lin11_to_val(data->vin_min))
+ data->vin_min = ret;
+ ret = data->vin_min;
+ }
+ break;
+ case PMBUS_VIRT_READ_VOUT_MIN:
+ ret = pmbus_read_word_data(client, page, LTC2978_MFR_VOUT_MIN);
+ if (ret >= 0) {
+ /*
+ * VOUT_MIN is known to not be supported on some lots
+ * of LTC2978 revision 1, and will return the maximum
+ * possible voltage if read. If VOUT_MAX is valid and
+ * lower than the reading of VOUT_MIN, use it instead.
+ */
+ if (data->vout_max[page] && ret > data->vout_max[page])
+ ret = data->vout_max[page];
+ if (ret < data->vout_min[page])
+ data->vout_min[page] = ret;
+ ret = data->vout_min[page];
+ }
+ break;
+ case PMBUS_VIRT_READ_TEMP_MIN:
+ ret = pmbus_read_word_data(client, page,
+ LTC2978_MFR_TEMPERATURE_MIN);
+ if (ret >= 0) {
+ if (lin11_to_val(ret)
+ < lin11_to_val(data->temp_min))
+ data->temp_min = ret;
+ ret = data->temp_min;
+ }
+ break;
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ case PMBUS_VIRT_RESET_VIN_HISTORY:
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int ltc2978_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ data->vout_min[page] = 0xffff;
+ data->vout_max[page] = 0;
+ ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+ break;
+ case PMBUS_VIRT_RESET_VIN_HISTORY:
+ data->vin_min = 0x7bff;
+ data->vin_max = 0;
+ ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+ break;
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ data->temp_min = 0x7bff;
+ data->temp_max = 0x7fff;
+ ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static const struct i2c_device_id ltc2978_id[] = {
+ {"ltc2978", ltc2978},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ltc2978_id);
+
+static int ltc2978_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int chip_id, ret, i;
+ struct ltc2978_data *data;
+ struct pmbus_driver_info *info;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_WORD_DATA))
+ return -ENODEV;
+
+ data = kzalloc(sizeof(struct ltc2978_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ chip_id = i2c_smbus_read_word_data(client, LTC2978_MFR_SPECIAL_ID);
+ if (chip_id < 0) {
+ ret = chip_id;
+ goto err_mem;
+ }
+
+ if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2) {
+ data->id = ltc2978;
+ } else {
+ dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
+ ret = -ENODEV;
+ goto err_mem;
+ }
+ if (data->id != id->driver_data)
+ dev_warn(&client->dev,
+ "Device mismatch: Configured %s, detected %s\n",
+ id->name,
+ ltc2978_id[data->id].name);
+
+ info = &data->info;
+ info->read_word_data = ltc2978_read_word_data;
+ info->write_word_data = ltc2978_write_word_data;
+
+ data->vout_min[0] = 0xffff;
+ data->vin_min = 0x7bff;
+ data->temp_min = 0x7bff;
+ data->temp_max = 0x7fff;
+
+ switch (id->driver_data) {
+ case ltc2978:
+ info->pages = 8;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ for (i = 1; i < 8; i++) {
+ info->func[i] = PMBUS_HAVE_VOUT
+ | PMBUS_HAVE_STATUS_VOUT;
+ data->vout_min[i] = 0xffff;
+ }
+ break;
+ default:
+ ret = -ENODEV;
+ goto err_mem;
+ }
+
+ ret = pmbus_do_probe(client, id, info);
+ if (ret)
+ goto err_mem;
+ return 0;
+
+err_mem:
+ kfree(data);
+ return ret;
+}
+
+static int ltc2978_remove(struct i2c_client *client)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct ltc2978_data *data = to_ltc2978_data(info);
+
+ pmbus_do_remove(client);
+ kfree(data);
+ return 0;
+}
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ltc2978_driver = {
+ .driver = {
+ .name = "ltc2978",
+ },
+ .probe = ltc2978_probe,
+ .remove = ltc2978_remove,
+ .id_table = ltc2978_id,
+};
+
+static int __init ltc2978_init(void)
+{
+ return i2c_add_driver(&ltc2978_driver);
+}
+
+static void __exit ltc2978_exit(void)
+{
+ i2c_del_driver(&ltc2978_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for LTC2978");
+MODULE_LICENSE("GPL");
+module_init(ltc2978_init);
+module_exit(ltc2978_exit);
diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c
index 1dfba44..ef5cc1e 100644
--- a/drivers/hwmon/pmbus/pmbus.c
+++ b/drivers/hwmon/pmbus/pmbus.c
@@ -204,7 +204,6 @@ static const struct i2c_device_id pmbus_id[] = {
{"bmr451", 1},
{"bmr453", 1},
{"bmr454", 1},
- {"ltc2978", 8},
{"ncp4200", 1},
{"ncp4208", 1},
{"pmbus", 0},
OpenPOWER on IntegriCloud