[PATCH] I2C: Move hwmon drivers (2/3)

Part 2: Move the driver files themselves.

Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.

From: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 655 insertions, 0 deletions

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
new file mode 100644
index 0000000..a67dcad
--- /dev/null
+++ b/drivers/hwmon/lm90.c
@@ -0,0 +1,655 @@
+/*
+ * lm90.c - Part of lm_sensors, Linux kernel modules for hardware
+ *          monitoring
+ * Copyright (C) 2003-2005  Jean Delvare <khali@linux-fr.org>
+ *
+ * Based on the lm83 driver. The LM90 is a sensor chip made by National
+ * Semiconductor. It reports up to two temperatures (its own plus up to
+ * one external one) with a 0.125 deg resolution (1 deg for local
+ * temperature) and a 3-4 deg accuracy. Complete datasheet can be
+ * obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM90.html
+ *
+ * This driver also supports the LM89 and LM99, two other sensor chips
+ * made by National Semiconductor. Both have an increased remote
+ * temperature measurement accuracy (1 degree), and the LM99
+ * additionally shifts remote temperatures (measured and limits) by 16
+ * degrees, which allows for higher temperatures measurement. The
+ * driver doesn't handle it since it can be done easily in user-space.
+ * Complete datasheets can be obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM89.html
+ *   http://www.national.com/pf/LM/LM99.html
+ * Note that there is no way to differentiate between both chips.
+ *
+ * This driver also supports the LM86, another sensor chip made by
+ * National Semiconductor. It is exactly similar to the LM90 except it
+ * has a higher accuracy.
+ * Complete datasheet can be obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM86.html
+ *
+ * This driver also supports the ADM1032, a sensor chip made by Analog
+ * Devices. That chip is similar to the LM90, with a few differences
+ * that are not handled by this driver. Complete datasheet can be
+ * obtained from Analog's website at:
+ *   http://products.analog.com/products/info.asp?product=ADM1032
+ * Among others, it has a higher accuracy than the LM90, much like the
+ * LM86 does.
+ *
+ * This driver also supports the MAX6657, MAX6658 and MAX6659 sensor
+ * chips made by Maxim. These chips are similar to the LM86. Complete
+ * datasheet can be obtained at Maxim's website at:
+ *   http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+ * Note that there is no easy way to differentiate between the three
+ * variants. The extra address and features of the MAX6659 are not
+ * supported by this driver.
+ *
+ * This driver also supports the ADT7461 chip from Analog Devices but
+ * only in its "compatability mode". If an ADT7461 chip is found but
+ * is configured in non-compatible mode (where its temperature
+ * register values are decoded differently) it is ignored by this
+ * driver. Complete datasheet can be obtained from Analog's website
+ * at:
+ *   http://products.analog.com/products/info.asp?product=ADT7461
+ *
+ * Since the LM90 was the first chipset supported by this driver, most
+ * comments will refer to this chipset, but are actually general and
+ * concern all supported chipsets, unless mentioned otherwise.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/hwmon-sysfs.h>
+
+/*
+ * Addresses to scan
+ * Address is fully defined internally and cannot be changed except for
+ * MAX6659.
+ * LM86, LM89, LM90, LM99, ADM1032, MAX6657 and MAX6658 have address 0x4c.
+ * LM89-1, and LM99-1 have address 0x4d.
+ * MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported).
+ * ADT7461 always has address 0x4c.
+ */
+
+static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461);
+
+/*
+ * The LM90 registers
+ */
+
+#define LM90_REG_R_MAN_ID		0xFE
+#define LM90_REG_R_CHIP_ID		0xFF
+#define LM90_REG_R_CONFIG1		0x03
+#define LM90_REG_W_CONFIG1		0x09
+#define LM90_REG_R_CONFIG2		0xBF
+#define LM90_REG_W_CONFIG2		0xBF
+#define LM90_REG_R_CONVRATE		0x04
+#define LM90_REG_W_CONVRATE		0x0A
+#define LM90_REG_R_STATUS		0x02
+#define LM90_REG_R_LOCAL_TEMP		0x00
+#define LM90_REG_R_LOCAL_HIGH		0x05
+#define LM90_REG_W_LOCAL_HIGH		0x0B
+#define LM90_REG_R_LOCAL_LOW		0x06
+#define LM90_REG_W_LOCAL_LOW		0x0C
+#define LM90_REG_R_LOCAL_CRIT		0x20
+#define LM90_REG_W_LOCAL_CRIT		0x20
+#define LM90_REG_R_REMOTE_TEMPH		0x01
+#define LM90_REG_R_REMOTE_TEMPL		0x10
+#define LM90_REG_R_REMOTE_OFFSH		0x11
+#define LM90_REG_W_REMOTE_OFFSH		0x11
+#define LM90_REG_R_REMOTE_OFFSL		0x12
+#define LM90_REG_W_REMOTE_OFFSL		0x12
+#define LM90_REG_R_REMOTE_HIGHH		0x07
+#define LM90_REG_W_REMOTE_HIGHH		0x0D
+#define LM90_REG_R_REMOTE_HIGHL		0x13
+#define LM90_REG_W_REMOTE_HIGHL		0x13
+#define LM90_REG_R_REMOTE_LOWH		0x08
+#define LM90_REG_W_REMOTE_LOWH		0x0E
+#define LM90_REG_R_REMOTE_LOWL		0x14
+#define LM90_REG_W_REMOTE_LOWL		0x14
+#define LM90_REG_R_REMOTE_CRIT		0x19
+#define LM90_REG_W_REMOTE_CRIT		0x19
+#define LM90_REG_R_TCRIT_HYST		0x21
+#define LM90_REG_W_TCRIT_HYST		0x21
+
+/*
+ * Conversions and various macros
+ * For local temperatures and limits, critical limits and the hysteresis
+ * value, the LM90 uses signed 8-bit values with LSB = 1 degree Celsius.
+ * For remote temperatures and limits, it uses signed 11-bit values with
+ * LSB = 0.125 degree Celsius, left-justified in 16-bit registers.
+ */
+
+#define TEMP1_FROM_REG(val)	((val) * 1000)
+#define TEMP1_TO_REG(val)	((val) <= -128000 ? -128 : \
+				 (val) >= 127000 ? 127 : \
+				 (val) < 0 ? ((val) - 500) / 1000 : \
+				 ((val) + 500) / 1000)
+#define TEMP2_FROM_REG(val)	((val) / 32 * 125)
+#define TEMP2_TO_REG(val)	((val) <= -128000 ? 0x8000 : \
+				 (val) >= 127875 ? 0x7FE0 : \
+				 (val) < 0 ? ((val) - 62) / 125 * 32 : \
+				 ((val) + 62) / 125 * 32)
+#define HYST_TO_REG(val)	((val) <= 0 ? 0 : (val) >= 30500 ? 31 : \
+				 ((val) + 500) / 1000)
+
+/* 
+ * ADT7461 is almost identical to LM90 except that attempts to write
+ * values that are outside the range 0 < temp < 127 are treated as
+ * the boundary value. 
+ */
+
+#define TEMP1_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \
+				 (val) >= 127000 ? 127 : \
+				 ((val) + 500) / 1000)
+#define TEMP2_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \
+				 (val) >= 127750 ? 0x7FC0 : \
+				 ((val) + 125) / 250 * 64)
+
+/*
+ * Functions declaration
+ */
+
+static int lm90_attach_adapter(struct i2c_adapter *adapter);
+static int lm90_detect(struct i2c_adapter *adapter, int address,
+	int kind);
+static void lm90_init_client(struct i2c_client *client);
+static int lm90_detach_client(struct i2c_client *client);
+static struct lm90_data *lm90_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver lm90_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm90",
+	.id		= I2C_DRIVERID_LM90,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm90_attach_adapter,
+	.detach_client	= lm90_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct lm90_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+	int kind;
+
+	/* registers values */
+	s8 temp8[5];	/* 0: local input
+			   1: local low limit
+			   2: local high limit
+			   3: local critical limit
+			   4: remote critical limit */
+	s16 temp11[3];	/* 0: remote input
+			   1: remote low limit
+			   2: remote high limit */
+	u8 temp_hyst;
+	u8 alarms; /* bitvector */
+};
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
+			  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm90_data *data = lm90_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index]));
+}
+
+static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
+			 const char *buf, size_t count)
+{
+	static const u8 reg[4] = {
+		LM90_REG_W_LOCAL_LOW,
+		LM90_REG_W_LOCAL_HIGH,
+		LM90_REG_W_LOCAL_CRIT,
+		LM90_REG_W_REMOTE_CRIT,
+	};
+
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm90_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	int nr = attr->index;
+
+	down(&data->update_lock);
+	if (data->kind == adt7461)
+		data->temp8[nr] = TEMP1_TO_REG_ADT7461(val);
+	else
+		data->temp8[nr] = TEMP1_TO_REG(val);
+	i2c_smbus_write_byte_data(client, reg[nr - 1], data->temp8[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
+			   char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm90_data *data = lm90_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP2_FROM_REG(data->temp11[attr->index]));
+}
+
+static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
+			  const char *buf, size_t count)
+{
+	static const u8 reg[4] = {
+		LM90_REG_W_REMOTE_LOWH,
+		LM90_REG_W_REMOTE_LOWL,
+		LM90_REG_W_REMOTE_HIGHH,
+		LM90_REG_W_REMOTE_HIGHL,
+	};
+
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm90_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	int nr = attr->index;
+
+	down(&data->update_lock);
+	if (data->kind == adt7461)
+		data->temp11[nr] = TEMP2_TO_REG_ADT7461(val);
+	else
+		data->temp11[nr] = TEMP2_TO_REG(val);
+	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2],
+				  data->temp11[nr] >> 8);
+	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
+				  data->temp11[nr] & 0xff);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temphyst(struct device *dev, struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm90_data *data = lm90_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index])
+		       - TEMP1_FROM_REG(data->temp_hyst));
+}
+
+static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
+			    const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm90_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	long hyst;
+
+	down(&data->update_lock);
+	hyst = TEMP1_FROM_REG(data->temp8[3]) - val;
+	i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
+				  HYST_TO_REG(hyst));
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy,
+			   char *buf)
+{
+	struct lm90_data *data = lm90_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8,
+	set_temp8, 1);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
+	set_temp11, 1);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8,
+	set_temp8, 2);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
+	set_temp11, 2);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp8,
+	set_temp8, 3);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8,
+	set_temp8, 4);
+static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst,
+	set_temphyst, 3);
+static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int lm90_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm90_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct lm90_data *data;
+	int err = 0;
+	const char *name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct lm90_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm90_data));
+
+	/* The common I2C client data is placed right before the
+	   LM90-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm90_driver;
+	new_client->flags = 0;
+
+	/*
+	 * Now we do the remaining detection. A negative kind means that
+	 * the driver was loaded with no force parameter (default), so we
+	 * must both detect and identify the chip. A zero kind means that
+	 * the driver was loaded with the force parameter, the detection
+	 * step shall be skipped. A positive kind means that the driver
+	 * was loaded with the force parameter and a given kind of chip is
+	 * requested, so both the detection and the identification steps
+	 * are skipped.
+	 */
+
+	/* Default to an LM90 if forced */
+	if (kind == 0)
+		kind = lm90;
+
+	if (kind < 0) { /* detection and identification */
+		u8 man_id, chip_id, reg_config1, reg_convrate;
+
+		man_id = i2c_smbus_read_byte_data(new_client,
+			 LM90_REG_R_MAN_ID);
+		chip_id = i2c_smbus_read_byte_data(new_client,
+			  LM90_REG_R_CHIP_ID);
+		reg_config1 = i2c_smbus_read_byte_data(new_client,
+			      LM90_REG_R_CONFIG1);
+		reg_convrate = i2c_smbus_read_byte_data(new_client,
+			       LM90_REG_R_CONVRATE);
+		
+		if (man_id == 0x01) { /* National Semiconductor */
+			u8 reg_config2;
+
+			reg_config2 = i2c_smbus_read_byte_data(new_client,
+				      LM90_REG_R_CONFIG2);
+
+			if ((reg_config1 & 0x2A) == 0x00
+			 && (reg_config2 & 0xF8) == 0x00
+			 && reg_convrate <= 0x09) {
+				if (address == 0x4C
+				 && (chip_id & 0xF0) == 0x20) { /* LM90 */
+					kind = lm90;
+				} else
+				if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
+					kind = lm99;
+				} else
+				if (address == 0x4C
+				 && (chip_id & 0xF0) == 0x10) { /* LM86 */
+					kind = lm86;
+				}
+			}
+		} else
+		if (man_id == 0x41) { /* Analog Devices */
+			if (address == 0x4C
+			 && (chip_id & 0xF0) == 0x40 /* ADM1032 */
+			 && (reg_config1 & 0x3F) == 0x00
+			 && reg_convrate <= 0x0A) {
+				kind = adm1032;
+			} else
+			if (address == 0x4c
+			 && chip_id == 0x51 /* ADT7461 */
+			 && (reg_config1 & 0x1F) == 0x00 /* check compat mode */
+			 && reg_convrate <= 0x0A) {
+				kind = adt7461;
+			}
+		} else
+		if (man_id == 0x4D) { /* Maxim */
+			/*
+			 * The Maxim variants do NOT have a chip_id register.
+			 * Reading from that address will return the last read
+			 * value, which in our case is those of the man_id
+			 * register. Likewise, the config1 register seems to
+			 * lack a low nibble, so the value will be those of the
+			 * previous read, so in our case those of the man_id
+			 * register.
+			 */
+			if (chip_id == man_id
+			 && (reg_config1 & 0x1F) == (man_id & 0x0F)
+			 && reg_convrate <= 0x09) {
+			 	kind = max6657;
+			}
+		}
+
+		if (kind <= 0) { /* identification failed */
+			dev_info(&adapter->dev,
+			    "Unsupported chip (man_id=0x%02X, "
+			    "chip_id=0x%02X).\n", man_id, chip_id);
+			goto exit_free;
+		}
+	}
+
+	if (kind == lm90) {
+		name = "lm90";
+	} else if (kind == adm1032) {
+		name = "adm1032";
+	} else if (kind == lm99) {
+		name = "lm99";
+	} else if (kind == lm86) {
+		name = "lm86";
+	} else if (kind == max6657) {
+		name = "max6657";
+	} else if (kind == adt7461) {
+		name = "adt7461";
+	}
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	data->kind = kind;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the LM90 chip */
+	lm90_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_input.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_input.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_min.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_min.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_max.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_max.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_crit.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_crit.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_crit_hyst.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_crit_hyst.dev_attr);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static void lm90_init_client(struct i2c_client *client)
+{
+	u8 config;
+
+	/*
+	 * Start the conversions.
+	 */
+	i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE,
+				  5); /* 2 Hz */
+	config = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG1);
+	if (config & 0x40)
+		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
+					  config & 0xBF); /* run */
+}
+
+static int lm90_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct lm90_data *lm90_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm90_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+		u8 oldh, newh;
+
+		dev_dbg(&client->dev, "Updating lm90 data.\n");
+		data->temp8[0] = i2c_smbus_read_byte_data(client,
+				 LM90_REG_R_LOCAL_TEMP);
+		data->temp8[1] = i2c_smbus_read_byte_data(client,
+				 LM90_REG_R_LOCAL_LOW);
+		data->temp8[2] = i2c_smbus_read_byte_data(client,
+				 LM90_REG_R_LOCAL_HIGH);
+		data->temp8[3] = i2c_smbus_read_byte_data(client,
+				 LM90_REG_R_LOCAL_CRIT);
+		data->temp8[4] = i2c_smbus_read_byte_data(client,
+				 LM90_REG_R_REMOTE_CRIT);
+		data->temp_hyst = i2c_smbus_read_byte_data(client,
+				  LM90_REG_R_TCRIT_HYST);
+
+		/*
+		 * There is a trick here. We have to read two registers to
+		 * have the remote sensor temperature, but we have to beware
+		 * a conversion could occur inbetween the readings. The
+		 * datasheet says we should either use the one-shot
+		 * conversion register, which we don't want to do (disables
+		 * hardware monitoring) or monitor the busy bit, which is
+		 * impossible (we can't read the values and monitor that bit
+		 * at the exact same time). So the solution used here is to
+		 * read the high byte once, then the low byte, then the high
+		 * byte again. If the new high byte matches the old one,
+		 * then we have a valid reading. Else we have to read the low
+		 * byte again, and now we believe we have a correct reading.
+		 */
+		oldh = i2c_smbus_read_byte_data(client,
+		       LM90_REG_R_REMOTE_TEMPH);
+		data->temp11[0] = i2c_smbus_read_byte_data(client,
+				  LM90_REG_R_REMOTE_TEMPL);
+		newh = i2c_smbus_read_byte_data(client,
+		       LM90_REG_R_REMOTE_TEMPH);
+		if (newh != oldh) {
+			data->temp11[0] = i2c_smbus_read_byte_data(client,
+					  LM90_REG_R_REMOTE_TEMPL);
+#ifdef DEBUG
+			oldh = i2c_smbus_read_byte_data(client,
+			       LM90_REG_R_REMOTE_TEMPH);
+			/* oldh is actually newer */
+			if (newh != oldh)
+				dev_warn(&client->dev, "Remote temperature may be "
+					 "wrong.\n");
+#endif
+		}
+		data->temp11[0] |= (newh << 8);
+
+		data->temp11[1] = (i2c_smbus_read_byte_data(client,
+				   LM90_REG_R_REMOTE_LOWH) << 8) +
+				   i2c_smbus_read_byte_data(client,
+				   LM90_REG_R_REMOTE_LOWL);
+		data->temp11[2] = (i2c_smbus_read_byte_data(client,
+				   LM90_REG_R_REMOTE_HIGHH) << 8) +
+				   i2c_smbus_read_byte_data(client,
+				   LM90_REG_R_REMOTE_HIGHL);
+		data->alarms = i2c_smbus_read_byte_data(client,
+			       LM90_REG_R_STATUS);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm90_init(void)
+{
+	return i2c_add_driver(&lm90_driver);
+}
+
+static void __exit sensors_lm90_exit(void)
+{
+	i2c_del_driver(&lm90_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("LM90/ADM1032 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm90_init);
+module_exit(sensors_lm90_exit);