hwmon: (lm63) Add support for LM96163

LM96163 is an enhanced version of LM63 with improved PWM resolution. Add chip
detection code as well as support for improved PWM resolution if the chip is
configured to use it.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

1 files changed, 36 insertions, 5 deletions

diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 313aee1..3d882c9 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -47,6 +47,7 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
+#include <linux/types.h>
 
 /*
  * Addresses to scan
@@ -91,6 +92,8 @@ static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };
 #define LM63_REG_MAN_ID			0xFE
 #define LM63_REG_CHIP_ID		0xFF
 
+#define LM96163_REG_CONFIG_ENHANCED	0x45
+
 /*
  * Conversions and various macros
  * For tachometer counts, the LM63 uses 16-bit values.
@@ -134,7 +137,7 @@ static struct lm63_data *lm63_update_device(struct device *dev);
 static int lm63_detect(struct i2c_client *client, struct i2c_board_info *info);
 static void lm63_init_client(struct i2c_client *client);
 
-enum chips { lm63, lm64 };
+enum chips { lm63, lm64, lm96163 };
 
 /*
  * Driver data (common to all clients)
@@ -143,6 +146,7 @@ enum chips { lm63, lm64 };
 static const struct i2c_device_id lm63_id[] = {
 	{ "lm63", lm63 },
 	{ "lm64", lm64 },
+	{ "lm96163", lm96163 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm63_id);
@@ -186,6 +190,7 @@ struct lm63_data {
 			   3: remote offset */
 	u8 temp2_crit_hyst;
 	u8 alarms;
+	bool pwm_highres;
 };
 
 /*
@@ -226,9 +231,16 @@ static ssize_t show_pwm1(struct device *dev, struct device_attribute *dummy,
 			 char *buf)
 {
 	struct lm63_data *data = lm63_update_device(dev);
-	return sprintf(buf, "%d\n", data->pwm1_value >= 2 * data->pwm1_freq ?
+	int pwm;
+
+	if (data->pwm_highres)
+		pwm = data->pwm1_value;
+	else
+		pwm = data->pwm1_value >= 2 * data->pwm1_freq ?
 		       255 : (data->pwm1_value * 255 + data->pwm1_freq) /
-		       (2 * data->pwm1_freq));
+		       (2 * data->pwm1_freq);
+
+	return sprintf(buf, "%d\n", pwm);
 }
 
 static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy,
@@ -246,9 +258,9 @@ static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy,
 	if (err)
 		return err;
 
+	val = SENSORS_LIMIT(val, 0, 255);
 	mutex_lock(&data->update_lock);
-	data->pwm1_value = val <= 0 ? 0 :
-			   val >= 255 ? 2 * data->pwm1_freq :
+	data->pwm1_value = data->pwm_highres ? val :
 			   (val * data->pwm1_freq * 2 + 127) / 255;
 	i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value);
 	mutex_unlock(&data->update_lock);
@@ -522,6 +534,8 @@ static int lm63_detect(struct i2c_client *new_client,
 		strlcpy(info->type, "lm63", I2C_NAME_SIZE);
 	else if (chip_id == 0x51 && (address == 0x18 || address == 0x4e))
 		strlcpy(info->type, "lm64", I2C_NAME_SIZE);
+	else if (chip_id == 0x49 && address == 0x4c)
+		strlcpy(info->type, "lm96163", I2C_NAME_SIZE);
 	else
 		return -ENODEV;
 
@@ -605,6 +619,23 @@ static void lm63_init_client(struct i2c_client *client)
 	if (data->pwm1_freq == 0)
 		data->pwm1_freq = 1;
 
+	/*
+	 * For LM96163, check if high resolution PWM is enabled.
+	 * Also, check if unsigned temperature format is enabled
+	 * and display a warning message if it is.
+	 */
+	if (data->kind == lm96163) {
+		u8 config_enhanced
+		  = i2c_smbus_read_byte_data(client,
+					     LM96163_REG_CONFIG_ENHANCED);
+		if ((config_enhanced & 0x10)
+		    && !(data->config_fan & 0x08) && data->pwm1_freq == 8)
+			data->pwm_highres = true;
+		if (config_enhanced & 0x08)
+			dev_warn(&client->dev,
+				 "Unsigned format for High and Crit setpoints enabled but not supported by driver\n");
+	}
+
 	/* Show some debug info about the LM63 configuration */
 	dev_dbg(&client->dev, "Alert/tach pin configured for %s\n",
 		(data->config & 0x04) ? "tachometer input" :