summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/it87.c
diff options
context:
space:
mode:
authorJean Delvare <khali@linux-fr.org>2009-12-09 20:35:47 +0100
committerJean Delvare <khali@linux-fr.org>2009-12-09 20:35:47 +0100
commit895ff267686663afa894314b749d23ac2867434a (patch)
tree01e16fe1eef64fcf175853f88cefc04400148e42 /drivers/hwmon/it87.c
parentf7290e24e3ce8a0b4b39a74800fd341b6b7a6f47 (diff)
downloadop-kernel-dev-895ff267686663afa894314b749d23ac2867434a.zip
op-kernel-dev-895ff267686663afa894314b749d23ac2867434a.tar.gz
hwmon: (it87) Verify the VID pin usage
The VID input pins can alternatively be used as GPIOs. Make sure we have at least 4 pins used for VID, otherwise don't bother reading and exposing VID. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Adam Nielsen <a.nielsen@shikadi.net>
Diffstat (limited to 'drivers/hwmon/it87.c')
-rw-r--r--drivers/hwmon/it87.c20
1 files changed, 16 insertions, 4 deletions
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index a3749cb..2f782e3 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -124,6 +124,7 @@ superio_exit(void)
#define IT87_BASE_REG 0x60
/* Logical device 7 registers (IT8712F and later) */
+#define IT87_SIO_GPIO3_REG 0x27
#define IT87_SIO_PINX2_REG 0x2c /* Pin selection */
#define IT87_SIO_VID_REG 0xfc /* VID value */
@@ -244,6 +245,7 @@ struct it87_sio_data {
/* Values read from Super-I/O config space */
u8 revision;
u8 vid_value;
+ u8 skip_vid;
/* Values set based on DMI strings */
u8 skip_pwm;
};
@@ -1028,11 +1030,22 @@ static int __init it87_find(unsigned short *address,
chip_type, *address, sio_data->revision);
/* Read GPIO config and VID value from LDN 7 (GPIO) */
- if (sio_data->type != it87) {
+ if (sio_data->type == it87) {
+ /* The IT8705F doesn't have VID pins at all */
+ sio_data->skip_vid = 1;
+ } else {
int reg;
superio_select(GPIO);
- if (sio_data->type == it8718 || sio_data->type == it8720)
+ /* We need at least 4 VID pins */
+ reg = superio_inb(IT87_SIO_GPIO3_REG);
+ if (reg & 0x0f) {
+ pr_info("it87: VID is disabled (pins used for GPIO)\n");
+ sio_data->skip_vid = 1;
+ }
+
+ if ((sio_data->type == it8718 || sio_data->type == it8720)
+ && !(sio_data->skip_vid))
sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
reg = superio_inb(IT87_SIO_PINX2_REG);
@@ -1236,8 +1249,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
}
}
- if (data->type == it8712 || data->type == it8716
- || data->type == it8718 || data->type == it8720) {
+ if (!sio_data->skip_vid) {
data->vrm = vid_which_vrm();
/* VID reading from Super-I/O config space if available */
data->vid = sio_data->vid_value;
OpenPOWER on IntegriCloud