drm/i915: Limit the watermark to at least 8 entries on gen2/3

830 is very unhappy of the watermark value is too low (indicating a very
high watermark in fact, ie. memory fetch will occur with an almost full
FIFO). Limit the watermark value to at least 8 cache lines.

That also matches the burst size we use on most platforms. BSpec seems
to indicate we should limit the watermark to 'burst size + 1'. But on
gen4 we already use a hardcoded 8 as the watermark value (as the spec
says we should), so just use 8 as the limit on gen2/3 as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 11 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 45f71e6..675e8a2 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -1070,6 +1070,17 @@ static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
 		wm_size = wm->max_wm;
 	if (wm_size <= 0)
 		wm_size = wm->default_wm;
+
+	/*
+	 * Bspec seems to indicate that the value shouldn't be lower than
+	 * 'burst size + 1'. Certainly 830 is quite unhappy with low values.
+	 * Lets go for 8 which is the burst size since certain platforms
+	 * already use a hardcoded 8 (which is what the spec says should be
+	 * done).
+	 */
+	if (wm_size <= 8)
+		wm_size = 8;
+
 	return wm_size;
 }