summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
diff options
context:
space:
mode:
authorJani Nikula <jani.nikula@intel.com>2012-08-13 17:33:02 +0300
committerDaniel Vetter <daniel.vetter@ffwll.ch>2012-08-13 19:04:24 +0200
commitcee25168e9c4ef7f9417632af2dc78b8521dfda7 (patch)
treeb69d9a810c22c2287d39fbfdabbe927dd27add9c /drivers/gpu
parent4344b813f105a19f793f1fd93ad775b784648b95 (diff)
downloadop-kernel-dev-cee25168e9c4ef7f9417632af2dc78b8521dfda7.zip
op-kernel-dev-cee25168e9c4ef7f9417632af2dc78b8521dfda7.tar.gz
drm/i915: ensure i2c adapter is all set before adding it
i2c_add_adapter() may do i2c transfers on the bus to detect supported devices. Therefore the adapter needs to be all set before adding it. This was not the case for the bit-banging fallback, resulting in an oops if the device detection GMBUS transfers timed out. Fix the issue by calling i2c_add_adapter() only after intel_gpio_setup(). LKML-Reference: <5021F00B.7000503@ionic.de> Tested-by: Mihai Moldovan <ionic@ionic.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Diffstat (limited to 'drivers/gpu')
-rw-r--r--drivers/gpu/drm/i915/intel_i2c.c7
1 files changed, 4 insertions, 3 deletions
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index d79500b..b9755f6 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -486,9 +486,6 @@ int intel_setup_gmbus(struct drm_device *dev)
bus->dev_priv = dev_priv;
bus->adapter.algo = &gmbus_algorithm;
- ret = i2c_add_adapter(&bus->adapter);
- if (ret)
- goto err;
/* By default use a conservative clock rate */
bus->reg0 = port | GMBUS_RATE_100KHZ;
@@ -498,6 +495,10 @@ int intel_setup_gmbus(struct drm_device *dev)
bus->force_bit = true;
intel_gpio_setup(bus, port);
+
+ ret = i2c_add_adapter(&bus->adapter);
+ if (ret)
+ goto err;
}
intel_i2c_reset(dev_priv->dev);
OpenPOWER on IntegriCloud