diff options
| author | John Stultz <john.stultz@linaro.org> | 2017-01-16 16:52:51 -0800 |
|---|---|---|
| committer | Archit Taneja <architt@codeaurora.org> | 2017-01-19 09:14:04 +0530 |
| commit | 4226d9b127cf4758ba0e07931b3f0d59f1b1a50c (patch) | |
| tree | 16cdaa6e5fb6cbcf0fbac87b10080ffde9e0de80 /drivers/gpu | |
| parent | 651e4769ba2a9f20c4b8a823ae2727bf7fa9c9f0 (diff) | |
| download | op-kernel-dev-4226d9b127cf4758ba0e07931b3f0d59f1b1a50c.zip op-kernel-dev-4226d9b127cf4758ba0e07931b3f0d59f1b1a50c.tar.gz | |
drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
Thus this patch changes the EDID probing logic so that we
re-use the __adv7511_power_on/off() calls instead of duplciating
logic.
This does change behavior slightly as it adds the HPD signal
pulse to the EDID probe path, but Archit has had a patch to
add HPD signal pulse to the EDID probe path before, so this
should address the cases where that helped. Another difference
is that regcache_mark_dirty() is also called in the power off
path once EDID is probed.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-6-git-send-email-john.stultz@linaro.org
Diffstat (limited to 'drivers/gpu')
| -rw-r--r-- | drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 17 |
1 files changed, 3 insertions, 14 deletions
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 545ceff..17b9e98 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -573,24 +573,13 @@ static int adv7511_get_modes(struct adv7511 *adv7511, unsigned int count; /* Reading the EDID only works if the device is powered */ - if (!adv7511->powered) { - regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, - ADV7511_POWER_POWER_DOWN, 0); - if (adv7511->i2c_main->irq) { - regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0), - ADV7511_INT0_EDID_READY); - regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1), - ADV7511_INT1_DDC_ERROR); - } - adv7511->current_edid_segment = -1; - } + if (!adv7511->powered) + __adv7511_power_on(adv7511); edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511); if (!adv7511->powered) - regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, - ADV7511_POWER_POWER_DOWN, - ADV7511_POWER_POWER_DOWN); + __adv7511_power_off(adv7511); kfree(adv7511->edid); adv7511->edid = edid; |
