drm/i915: add VGA hotplug support for 945+

Add VGA port hotplug detection to the i915 driver.  When KMS is enabled,
plugging in or removing a VGA cable from the VGA connector will
generate a uevent, which indicates to userspace that it should re-probe
outputs on this device (to determine modes, etc.).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: dropped extra PORT_HOTPLUG_STAT clear with ack from jbarnes]
Signed-off-by: Eric Anholt <eric@anholt.net>

6 files changed, 77 insertions, 14 deletions

diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 5de573a..bc0c6849 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -451,6 +451,7 @@ void drm_sysfs_hotplug_event(struct drm_device *dev)
 
 	kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, envp);
 }
+EXPORT_SYMBOL(drm_sysfs_hotplug_event);
 
 /**
  * drm_sysfs_device_add - adds a class device to sysfs for a character driver
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 8ce57f9..0b9984f 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1030,13 +1030,6 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	if (ret)
 		goto destroy_ringbuffer;
 
-	/* FIXME: re-add hotplug support */
-#if 0
-	ret = drm_hotplug_init(dev);
-	if (ret)
-		goto destroy_ringbuffer;
-#endif
-
 	/* Always safe in the mode setting case. */
 	/* FIXME: do pre/post-mode set stuff in core KMS code */
 	dev->vblank_disable_allowed = 1;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index c1685d0..c0f48bb 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -159,6 +159,9 @@ typedef struct drm_i915_private {
 	u32 irq_mask_reg;
 	u32 pipestat[2];
 
+	u32 hotplug_supported_mask;
+	struct work_struct hotplug_work;
+
 	int tex_lru_log_granularity;
 	int allow_batchbuffer;
 	struct mem_block *agp_heap;
@@ -810,6 +813,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \
 						      IS_I915GM(dev)))
 #define SUPPORTS_INTEGRATED_HDMI(dev)	(IS_G4X(dev))
+#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
 
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 87b6b60..ee7ce7b 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -48,10 +48,6 @@
 /** Interrupts that we mask and unmask at runtime. */
 #define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
 
-/** These are all of the interrupts used by the driver */
-#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \
-				    I915_INTERRUPT_ENABLE_VAR)
-
 #define I915_PIPE_VBLANK_STATUS	(PIPE_START_VBLANK_INTERRUPT_STATUS |\
 				 PIPE_VBLANK_INTERRUPT_STATUS)
 
@@ -187,6 +183,19 @@ u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
 	return I915_READ(reg);
 }
 
+/*
+ * Handle hotplug events outside the interrupt handler proper.
+ */
+static void i915_hotplug_work_func(struct work_struct *work)
+{
+	drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
+						    hotplug_work);
+	struct drm_device *dev = dev_priv->dev;
+
+	/* Just fire off a uevent and let userspace tell us what to do */
+	drm_sysfs_hotplug_event(dev);
+}
+
 irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
@@ -244,6 +253,20 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 
 		ret = IRQ_HANDLED;
 
+		/* Consume port.  Then clear IIR or we'll miss events */
+		if ((I915_HAS_HOTPLUG(dev)) &&
+		    (iir & I915_DISPLAY_PORT_INTERRUPT)) {
+			u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
+
+			DRM_DEBUG("hotplug event received, stat 0x%08x\n",
+				  hotplug_status);
+			if (hotplug_status & dev_priv->hotplug_supported_mask)
+				schedule_work(&dev_priv->hotplug_work);
+
+			I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
+			I915_READ(PORT_HOTPLUG_STAT);
+		}
+
 		I915_WRITE(IIR, iir);
 		new_iir = I915_READ(IIR); /* Flush posted writes */
 
@@ -528,17 +551,24 @@ void i915_driver_irq_preinstall(struct drm_device * dev)
 
 	atomic_set(&dev_priv->irq_received, 0);
 
+	if (I915_HAS_HOTPLUG(dev)) {
+		I915_WRITE(PORT_HOTPLUG_EN, 0);
+		I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
+	}
+
 	I915_WRITE(HWSTAM, 0xeffe);
 	I915_WRITE(PIPEASTAT, 0);
 	I915_WRITE(PIPEBSTAT, 0);
 	I915_WRITE(IMR, 0xffffffff);
 	I915_WRITE(IER, 0x0);
 	(void) I915_READ(IER);
+	INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
 }
 
 int i915_driver_irq_postinstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
 
 	dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
 
@@ -550,13 +580,35 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 	dev_priv->pipestat[0] = 0;
 	dev_priv->pipestat[1] = 0;
 
+	if (I915_HAS_HOTPLUG(dev)) {
+		u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+
+		/* Leave other bits alone */
+		hotplug_en |= HOTPLUG_EN_MASK;
+		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+
+		dev_priv->hotplug_supported_mask = CRT_HOTPLUG_INT_STATUS |
+			TV_HOTPLUG_INT_STATUS | SDVOC_HOTPLUG_INT_STATUS |
+			SDVOB_HOTPLUG_INT_STATUS;
+		if (IS_G4X(dev)) {
+			dev_priv->hotplug_supported_mask |=
+				HDMIB_HOTPLUG_INT_STATUS |
+				HDMIC_HOTPLUG_INT_STATUS |
+				HDMID_HOTPLUG_INT_STATUS;
+		}
+		/* Enable in IER... */
+		enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
+		/* and unmask in IMR */
+		i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT);
+	}
+
 	/* Disable pipe interrupt enables, clear pending pipe status */
 	I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
 	I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
 	/* Clear pending interrupt status */
 	I915_WRITE(IIR, I915_READ(IIR));
 
-	I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK);
+	I915_WRITE(IER, enable_mask);
 	I915_WRITE(IMR, dev_priv->irq_mask_reg);
 	(void) I915_READ(IER);
 
@@ -575,6 +627,11 @@ void i915_driver_irq_uninstall(struct drm_device * dev)
 
 	dev_priv->vblank_pipe = 0;
 
+	if (I915_HAS_HOTPLUG(dev)) {
+		I915_WRITE(PORT_HOTPLUG_EN, 0);
+		I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
+	}
+
 	I915_WRITE(HWSTAM, 0xffffffff);
 	I915_WRITE(PIPEASTAT, 0);
 	I915_WRITE(PIPEBSTAT, 0);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 83357b09..e805b59 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -651,6 +651,14 @@
 #define CRT_HOTPLUG_DETECT_VOLTAGE_325MV	(0 << 2)
 #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV	(1 << 2)
 #define CRT_HOTPLUG_MASK			(0x3fc) /* Bits 9-2 */
+#define CRT_FORCE_HOTPLUG_MASK			0xfffffe1f
+#define HOTPLUG_EN_MASK (HDMIB_HOTPLUG_INT_EN | \
+			 HDMIC_HOTPLUG_INT_EN |	  \
+			 HDMID_HOTPLUG_INT_EN |	  \
+			 SDVOB_HOTPLUG_INT_EN |	  \
+			 SDVOC_HOTPLUG_INT_EN |	  \
+			 TV_HOTPLUG_INT_EN |	  \
+			 CRT_HOTPLUG_INT_EN)
 
 
 #define PORT_HOTPLUG_STAT	0x61114
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 2b6d443..9bdd959 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -41,7 +41,7 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
 
 	temp = I915_READ(ADPA);
 	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
-	temp &= ~ADPA_DAC_ENABLE;
+	temp |= ADPA_DAC_ENABLE;
 
 	switch(mode) {
 	case DRM_MODE_DPMS_ON:
@@ -158,7 +158,7 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 	else
 		tries = 1;
 	hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-	hotplug_en &= ~(CRT_HOTPLUG_MASK);
+	hotplug_en &= CRT_FORCE_HOTPLUG_MASK;
 	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 
 	if (IS_GM45(dev))