diff options
author | Jyri Sarha <jsarha@ti.com> | 2016-04-11 12:46:11 +0300 |
---|---|---|
committer | Jyri Sarha <jsarha@ti.com> | 2016-08-08 23:05:08 +0300 |
commit | 6b4736db9c5d5fa903d20f1a82fe2777a395c955 (patch) | |
tree | 0dc6feb0f21a999b8f7376d0696efa6b43985086 /drivers/gpu/drm/tilcdc | |
parent | 305198de894345b788522feacded0ca78f9db5d2 (diff) | |
download | op-kernel-dev-6b4736db9c5d5fa903d20f1a82fe2777a395c955.zip op-kernel-dev-6b4736db9c5d5fa903d20f1a82fe2777a395c955.tar.gz |
drm/tilcdc: Remove obsolete crtc helper functions
Remove obsolete crtc helper functions. These are not needed when
atomic modeset is used.
Note that the drm_crtc_helper_funcs mode_fixup() is still needed. The
crtc's check() callback can not do its job here.
The plane's check() callback needs to set drm_crtc_state's
->mode_changed to true if the pixel format for the framebuffer
changes. Because of this drm_mode_config_funcs atomic_check() callback
needs to call drm_atomic_helper_check_modeset() once more after it has
called drm_atomic_helper_check_planes(). If the fixing of the
adjusted_mode would be done in drm_crtc_helper_funcs atomic_check()
callback, it would get over written by the extra
drm_atomic_helper_check_modeset() call.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Diffstat (limited to 'drivers/gpu/drm/tilcdc')
-rw-r--r-- | drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 208 |
1 files changed, 0 insertions, 208 deletions
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 9a21a7f..d150b3e 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -501,209 +501,6 @@ static int tilcdc_crtc_atomic_check(struct drm_crtc *crtc, return 0; } -static int tilcdc_crtc_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, - int x, int y, - struct drm_framebuffer *old_fb) -{ - struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); - struct drm_device *dev = crtc->dev; - struct tilcdc_drm_private *priv = dev->dev_private; - const struct tilcdc_panel_info *info = tilcdc_crtc->info; - uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw; - int ret; - - ret = tilcdc_crtc_mode_valid(crtc, mode); - if (WARN_ON(ret)) - return ret; - - if (WARN_ON(!info)) - return -EINVAL; - - ret = tilcdc_verify_fb(crtc, crtc->primary->fb); - if (ret) - return ret; - - pm_runtime_get_sync(dev->dev); - - /* Configure the Burst Size and fifo threshold of DMA: */ - reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770; - switch (info->dma_burst_sz) { - case 1: - reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1); - break; - case 2: - reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2); - break; - case 4: - reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4); - break; - case 8: - reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8); - break; - case 16: - reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16); - break; - default: - return -EINVAL; - } - reg |= (info->fifo_th << 8); - tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg); - - /* Configure timings: */ - hbp = mode->htotal - mode->hsync_end; - hfp = mode->hsync_start - mode->hdisplay; - hsw = mode->hsync_end - mode->hsync_start; - vbp = mode->vtotal - mode->vsync_end; - vfp = mode->vsync_start - mode->vdisplay; - vsw = mode->vsync_end - mode->vsync_start; - - DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u", - mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw); - - /* Configure the AC Bias Period and Number of Transitions per Interrupt: */ - reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00; - reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) | - LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt); - - /* - * subtract one from hfp, hbp, hsw because the hardware uses - * a value of 0 as 1 - */ - if (priv->rev == 2) { - /* clear bits we're going to set */ - reg &= ~0x78000033; - reg |= ((hfp-1) & 0x300) >> 8; - reg |= ((hbp-1) & 0x300) >> 4; - reg |= ((hsw-1) & 0x3c0) << 21; - } - tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg); - - reg = (((mode->hdisplay >> 4) - 1) << 4) | - (((hbp-1) & 0xff) << 24) | - (((hfp-1) & 0xff) << 16) | - (((hsw-1) & 0x3f) << 10); - if (priv->rev == 2) - reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3; - tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg); - - reg = ((mode->vdisplay - 1) & 0x3ff) | - ((vbp & 0xff) << 24) | - ((vfp & 0xff) << 16) | - (((vsw-1) & 0x3f) << 10); - tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg); - - /* - * be sure to set Bit 10 for the V2 LCDC controller, - * otherwise limited to 1024 pixels width, stopping - * 1920x1080 being suppoted. - */ - if (priv->rev == 2) { - if ((mode->vdisplay - 1) & 0x400) { - tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, - LCDC_LPP_B10); - } else { - tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, - LCDC_LPP_B10); - } - } - - /* Configure display type: */ - reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) & - ~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE | - LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK | 0x000ff000); - reg |= LCDC_TFT_MODE; /* no monochrome/passive support */ - if (info->tft_alt_mode) - reg |= LCDC_TFT_ALT_ENABLE; - if (priv->rev == 2) { - unsigned int depth, bpp; - - drm_fb_get_bpp_depth(crtc->primary->fb->pixel_format, &depth, &bpp); - switch (bpp) { - case 16: - break; - case 32: - reg |= LCDC_V2_TFT_24BPP_UNPACK; - /* fallthrough */ - case 24: - reg |= LCDC_V2_TFT_24BPP_MODE; - break; - default: - dev_err(dev->dev, "invalid pixel format\n"); - return -EINVAL; - } - } - reg |= info->fdd < 12; - tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg); - - if (info->invert_pxl_clk) - tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK); - else - tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK); - - if (info->sync_ctrl) - tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL); - else - tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL); - - if (info->sync_edge) - tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE); - else - tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE); - - /* - * use value from adjusted_mode here as this might have been - * changed as part of the fixup for slave encoders to solve the - * issue where tilcdc timings are not VESA compliant - */ - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC); - else - tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC); - - if (mode->flags & DRM_MODE_FLAG_NVSYNC) - tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC); - else - tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC); - - if (info->raster_order) - tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER); - else - tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER); - - drm_framebuffer_reference(crtc->primary->fb); - - set_scanout(crtc, crtc->primary->fb); - - tilcdc_crtc_update_clk(crtc); - - pm_runtime_put_sync(dev->dev); - - return 0; -} - -static int tilcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, - struct drm_framebuffer *old_fb) -{ - struct drm_device *dev = crtc->dev; - int r; - - r = tilcdc_verify_fb(crtc, crtc->primary->fb); - if (r) - return r; - - drm_framebuffer_reference(crtc->primary->fb); - - pm_runtime_get_sync(dev->dev); - - set_scanout(crtc, crtc->primary->fb); - - pm_runtime_put_sync(dev->dev); - - return 0; -} - static const struct drm_crtc_funcs tilcdc_crtc_funcs = { .destroy = tilcdc_crtc_destroy, .set_config = drm_atomic_helper_set_config, @@ -714,12 +511,7 @@ static const struct drm_crtc_funcs tilcdc_crtc_funcs = { }; static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = { - .dpms = tilcdc_crtc_dpms, .mode_fixup = tilcdc_crtc_mode_fixup, - .prepare = tilcdc_crtc_disable, - .commit = tilcdc_crtc_enable, - .mode_set = tilcdc_crtc_mode_set, - .mode_set_base = tilcdc_crtc_mode_set_base, .enable = tilcdc_crtc_enable, .disable = tilcdc_crtc_disable, .atomic_check = tilcdc_crtc_atomic_check, |